linux/arch/powerpc/boot
Alistair Popple e2c37d9083 powerpc: Added PCI MSI support using the HSTA module
The PPC476GTR SoC supports message signalled interrupts (MSI) by writing
to special addresses within the High Speed Transfer Assist (HSTA) module.

This patch adds support for PCI MSI with a new system device. The DMA
window is also updated to allow access to the entire 42-bit address range
to allow PCI devices write access to the HSTA module.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-01 08:26:30 +10:00
..
dts powerpc: Added PCI MSI support using the HSTA module 2014-05-01 08:26:30 +10:00
.gitignore powerpc/boot: Ignore .dtb files. 2013-12-02 14:06:57 +11:00
4xx.c powerpc/44x: Fix UART clocks on 440SPe 2010-05-12 07:48:49 -04:00
4xx.h powerpc/405ex: provide necessary fixup function to support cuImage 2009-08-31 09:20:55 -04:00
44x.h
addnote.c powerpc/boot: Add 64bit and little endian support to addnote 2014-04-28 17:36:00 +10:00
bamboo.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cpm-serial.c [POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram. 2008-04-17 01:01:37 -05:00
crt0.S powerpc/boot: Add support for 64bit little endian wrapper 2014-04-28 17:36:21 +10:00
crtsavres.S [POWERPC] Fix bootwrapper builds with newer gcc versions 2008-06-16 15:00:52 +10:00
cuboot-8xx.c
cuboot-52xx.c powerpc/52xx: Make cuImage more robust in locating immr node. 2008-10-15 11:09:59 -06:00
cuboot-83xx.c
cuboot-85xx-cpm2.c
cuboot-85xx.c powerpc/85xx: cuboot - Fix up ethernet3 MAC address on MPC85xx 2009-06-15 21:45:32 -05:00
cuboot-824x.c
cuboot-acadia.c powerpc/40x: Add cuboot wrapper for Acadia board 2008-10-17 10:31:19 -04:00
cuboot-amigaone.c powerpc/amigaone: Bootwrapper and serial console support for AmigaOne 2009-02-11 16:00:09 +11:00
cuboot-bamboo.c
cuboot-c2k.c powerpc: Boot code for the C2K 2008-06-09 13:42:25 +10:00
cuboot-ebony.c
cuboot-hotfoot.c powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC 2009-08-31 09:15:51 -04:00
cuboot-katmai.c
cuboot-kilauea.c powerpc/405ex: support cuImage via included dtb 2009-08-31 09:23:22 -04:00
cuboot-mpc7448hpc2.c
cuboot-pq2.c [POWERPC] cuboot-pq2: PCI fixes 2008-04-17 01:01:40 -05:00
cuboot-rainier.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-sam440ep.c powerpc/4xx: Sam440ep support 2008-06-11 08:32:49 -04:00
cuboot-sequoia.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-taishan.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
cuboot-warp.c powerpc/44x: Warp patches for the new NDFC driver 2009-01-20 08:17:21 -05:00
cuboot-yosemite.c [POWERPC] 4xx: Add bootwrapper for AMCC Yosemite board 2008-03-26 07:19:17 -05:00
cuboot.c
cuboot.h
dcr.h IBM Akebono: Add the Akebono platform 2014-05-01 08:26:26 +10:00
devtree.c powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use 2008-12-21 14:21:17 +11:00
div64.S powerpc/boot: Add extended precision shifts to the boot wrapper. 2011-12-09 07:49:27 -05:00
dummy.c
ebony.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
elf_util.c powerpc/boot: Add little endian support to elf utils 2014-04-28 17:36:04 +10:00
elf.h
ep88xc.c
ep405.c
ep8248e.c
epapr-wrapper.c powerpc/zImage: make the "OF" wrapper support ePAPR boot 2013-09-25 14:18:44 +10:00
epapr.c powerpc/zImage: make the "OF" wrapper support ePAPR boot 2013-09-25 14:18:44 +10:00
fixed-head.S
fsl-soc.c
fsl-soc.h
gamecube-head.S powerpc: gamecube: bootwrapper bits 2009-12-12 22:24:26 -07:00
gamecube.c powerpc: gamecube: bootwrapper bits 2009-12-12 22:24:26 -07:00
gunzip_util.c
gunzip_util.h
hack-coff.c
holly.c
install.sh kbuild: use INSTALLKERNEL to select customized installkernel script 2009-09-20 12:18:14 +02:00
io.h powerpc: Move include files to arch/powerpc/include/asm 2008-08-04 12:02:00 +10:00
libfdt_env.h powerpc: Update in-kernel dtc and libfdt to version 1.2.0 2008-08-20 16:34:58 +10:00
libfdt-wrapper.c powerpc/boot: Allocate more memory for dtb 2008-11-06 09:49:43 +11:00
main.c powerpc: Rename duplicate COMMAND_LINE_SIZE define 2014-04-28 16:31:54 +10:00
Makefile IBM Akebono: Add the Akebono platform 2014-05-01 08:26:26 +10:00
mktree.c powerpc: use consistent types in mktree 2009-08-20 10:29:30 +10:00
mpc8xx.c
mpc8xx.h
mpc52xx-psc.c [POWERPC] Add bootwrapper function to get virtual reg from the device tree. 2008-04-17 01:01:37 -05:00
mpsc.c [POWERPC] prpmc2800: Clean up dts properties 2008-04-15 21:21:24 +10:00
mv64x60_i2c.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
mv64x60.h
mvme5100.c powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100 2014-01-09 17:52:20 -06:00
ns16550.c [POWERPC] Xilinx: boot support for Xilinx uart 16550. 2008-04-24 13:32:46 -05:00
of.c powerpc/boot: Rework of_claim() to make it 64bit friendly 2014-04-28 17:35:43 +10:00
of.h powerpc/boot: Define byteswapping routines for little endian 2014-04-28 17:35:56 +10:00
ofconsole.c powerpc/boot: Add byteswapping routines in oflib 2014-04-28 17:35:35 +10:00
oflib.c powerpc/boot: Define a routine to enter prom 2014-04-28 17:36:08 +10:00
ops.h powerpc: Bump BOOT_COMMAND_LINE_SIZE to 2048 2014-04-28 16:32:02 +10:00
page.h
planetcore.c
planetcore.h
ppc_asm.h powerpc/boot: Add support for 64bit little endian wrapper 2014-04-28 17:36:21 +10:00
ppcboot-hotfoot.h powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC 2009-08-31 09:15:51 -04:00
ppcboot.h
pq2.c
pq2.h
prpmc2800.c [POWERPC] mv64x60: Remove device tree absolute path references 2008-04-15 21:21:24 +10:00
ps3-head.S [POWERPC] PS3: Bootwrapper improvements 2008-04-01 20:43:07 +11:00
ps3-hvcall.S
ps3.c powerpc: Rename duplicate COMMAND_LINE_SIZE define 2014-04-28 16:31:54 +10:00
pseries-head.S powerpc/boot: Add support for 64bit little endian wrapper 2014-04-28 17:36:21 +10:00
README
redboot-8xx.c
redboot-83xx.c [POWERPC] 83xx: Add support for Analogue & Micro ASP837E board 2008-06-02 14:44:25 -05:00
redboot.h
reg.h
rs6000.h
serial.c powerpc/amigaone: Bootwrapper and serial console support for AmigaOne 2009-02-11 16:00:09 +11:00
simple_alloc.c
simpleboot.c Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtc 2009-05-02 16:52:26 -07:00
stdio.c powerpc/boot: Fix do_div for 64bit wrapper 2014-04-28 17:35:22 +10:00
stdio.h
stdlib.c
stdlib.h
string.h
string.S powerpc: Fix boot wrapper memcmp() called with zero length argument 2008-10-21 15:17:48 +11:00
swab.h powerpc/boot: Define byteswapping routines for little endian 2014-04-28 17:35:56 +10:00
treeboot-akebono.c powerpc: Added PCI MSI support using the HSTA module 2014-05-01 08:26:30 +10:00
treeboot-bamboo.c
treeboot-currituck.c powerpc/47x: Add support for the new IBM currituck platform 2011-12-09 07:51:40 -05:00
treeboot-ebony.c
treeboot-iss4xx.c powerpc/44x: boot wrapper: allow kernel to load into non-zero address 2011-07-12 09:34:41 -04:00
treeboot-walnut.c [POWERPC] Start removing linux,network-index in favour of aliases 2008-03-26 07:19:16 -05:00
types.h
uartlite.c
ugecon.c powerpc/gamecube/wii: Fix off-by-one error in ugecon/usbgecko_udbg 2009-12-18 15:13:57 +11:00
ugecon.h powerpc: gamecube/wii: usbgecko bootwrapper console support 2009-12-12 22:24:26 -07:00
util.S powerpc/8xx: mfspr SPRN_TBRx in lieu of mftb/mftbu is not supported 2013-11-22 16:56:48 -06:00
virtex405-head.S [POWERPC] bootwrapper: Add a firmware-independent simpleboot target. 2008-04-02 20:36:11 -05:00
virtex.c powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440 2008-07-04 00:58:59 -06:00
wii-head.S powerpc: wii: bootwrapper bits 2009-12-12 22:24:29 -07:00
wii.c wii: bootwrapper: add fixup to calc useable mem2 2009-12-12 22:24:31 -07:00
wrapper IBM Akebono: Add the Akebono platform 2014-05-01 08:26:26 +10:00
zImage.coff.lds.S powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN 2011-04-20 16:59:20 +10:00
zImage.lds.S powerpc/boot: Add support for 64bit little endian wrapper 2014-04-28 17:36:21 +10:00
zImage.ps3.lds.S

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter