Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-20 10:01:56 +00:00
Code Issues Packages Projects Releases Wiki Activity
aa7bfb537e
linux/drivers/reset/Kconfig
Linus Torvalds 9f3a2ba62c The core framework gained a clk provider helper, a clk consumer helper, and 
some unit tests for the assigned clk rates feature in DeviceTree. On the vendor
 driver side, we gained a whole pile of SoC driver support detailed below. The
 majority in the diffstat is Qualcomm, but there's also quite a few Samsung and
 Mediatek clk driver additions in here as well. The top vendors is quite common,
 but the sheer amount of new drivers is uncommon, so I'm anticipating a larger
 number of fixes for clk drivers this cycle.
 
 Core:
  - devm_clk_bulk_get_all_enabled() to return number of clks acquired
  - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
  - KUnit tests for clk-assigned-rates{,-u64}
 
 New Drivers:
  - Marvell PXA1908 SoC clks
  - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
  - TWL6030 clk driver
  - Nuvoton Arbel BMC NPCM8XX SoC clks
  - MediaTek MT6735 SoC clks
  - MediaTek MT7620, MT7628 and MT7688 MMC clks
  - Add a driver for gated fixed rate clocks
  - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
  - Camera, display and video clock controllers for Qualcomm SA8775P SoCs
  - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm SAR2130P
  - Global, camera, display, GPU, and video clock controllers for Qualcomm
    SM8475 SoCs
  - RTC power domain and Battery Backup Function (VBATTB) clock support for the
    Renesas RZ/G3S SoC
  - Qualcomm IPQ9574 alpha PLLs
  - Support for i.MX91 CCM in the i.MX93 driver
  - Microchip LAN969X SoC clks
  - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and reset on
    Renesas RZ/V2H(P)
  - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
  - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
 
 Updates:
  - Convert more clk bindings to YAML
  - Various clk driver cleanups: NULL checks, add const, etc.
  - Remove END/NUM #defines that count number of clks in various binding headers
  - Continue moving reset drivers to drivers/reset via auxiliary bus
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmc/r1kRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUlaw/+NkmTMPSpgKy8NfZi6KoCk3U5llaknXvj
 Y/Y2pB7UpOFDTsSCKRcFrZ6JWS6GIogE70W9w+zxIht4QA4Ekd9vKT7VRhMl+8t/
 pz2i0c0Pm24hSye9LKM7JCVIVL8SNYonOs3wC1sfMVMDoUikVwupj6Bmj0nAYrBo
 hbJFBXtn/LbyYImJQ9hYqHnUtJKGp/N7hhpGu6kT/lbzcaWsBMp4lhH+s20DJz5e
 kdJVJGaLOELerAG/SHIxh9obtfznvex6x3itTB0o/d6/1DSDjjlxnZH8YV8eQWk0
 kK+ORuewA+qCi3RiPReHCPBIfPI4HL0z3k5JFA5eI7eD4VZIis+YBOa/Y8bQR9bG
 wDg5qh5su0fdeWBUvkFB03igNoMdtH68iYd2q3YE0ka95FGulcyvbqoyxTJnjIxW
 328PizYZV8LQ4+LGSdIFyp9f/SrjF0pAt7yTF8Dis3jq3ul/6ELX9G6OCNgtGKQz
 p0Hb01fKC4s7w48QI5OXQKfS382vS8G8a2NIwt2xxorc4+Dr2rjPvlDhErshCOAT
 nDEerIjGWr/0rQeTGxg+SLUx5ytq2aBkysg95/9WVe3b8kZeePiW9gEH4tgealY8
 eHzFvbqXutlKer0xLOYiLd3hOeHhkCJNj48QS8jVXtRGGeLjZONw5F1mjTNskPpx
 9jbKMcDjGyc=
 =FqLm
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The core framework gained a clk provider helper, a clk consumer
  helper, and some unit tests for the assigned clk rates feature in
  DeviceTree. On the vendor driver side, we gained a whole pile of SoC
  driver support detailed below. The majority in the diffstat is
  Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
  additions in here as well. The top vendors is quite common, but the
  sheer amount of new drivers is uncommon, so I'm anticipating a larger
  number of fixes for clk drivers this cycle.

  Core:
   - devm_clk_bulk_get_all_enabled() to return number of clks acquired
   - devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
   - KUnit tests for clk-assigned-rates{,-u64}

  New Drivers:
   - Marvell PXA1908 SoC clks
   - Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
   - TWL6030 clk driver
   - Nuvoton Arbel BMC NPCM8XX SoC clks
   - MediaTek MT6735 SoC clks
   - MediaTek MT7620, MT7628 and MT7688 MMC clks
   - Add a driver for gated fixed rate clocks
   - Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
   - Camera, display and video clock controllers for Qualcomm SA8775P
     SoCs
   - Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
     SAR2130P
   - Global, camera, display, GPU, and video clock controllers for
     Qualcomm SM8475 SoCs
   - RTC power domain and Battery Backup Function (VBATTB) clock support
     for the Renesas RZ/G3S SoC
   - Qualcomm IPQ9574 alpha PLLs
   - Support for i.MX91 CCM in the i.MX93 driver
   - Microchip LAN969X SoC clks
   - Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
     reset on Renesas RZ/V2H(P)
   - Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
   - Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP

  Updates:
   - Convert more clk bindings to YAML
   - Various clk driver cleanups: NULL checks, add const, etc.
   - Remove END/NUM #defines that count number of clks in various
     binding headers
   - Continue moving reset drivers to drivers/reset via auxiliary bus"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
  clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
  clk: Fix invalid execution of clk_set_rate
  clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
  clk: lan966x: make it selectable for ARCH_LAN969X
  clk: eyeq: add EyeQ6H west fixed factor clocks
  clk: eyeq: add EyeQ6H central fixed factor clocks
  clk: eyeq: add EyeQ5 fixed factor clocks
  clk: eyeq: add fixed factor clocks infrastructure
  clk: eyeq: require clock index with phandle in all cases
  clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
  dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
  dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
  clk: clk-axi-clkgen: make sure to enable the AXI bus clock
  dt-bindings: clock: axi-clkgen: include AXI clk
  clk: mmp: Add Marvell PXA1908 MPMU driver
  clk: mmp: Add Marvell PXA1908 APMU driver
  clk: mmp: Add Marvell PXA1908 APBCP driver
  clk: mmp: Add Marvell PXA1908 APBC driver
  dt-bindings: clock: Add Marvell PXA1908 clock bindings
  clk: mmp: Switch to use struct u32_fract instead of custom one
  ...
2024-11-22 17:02:25 -08:00

353 lines
11 KiB
Plaintext
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
config ARCH_HAS_RESET_CONTROLLER
bool
menuconfig RESET_CONTROLLER
bool "Reset Controller Support"
default y if ARCH_HAS_RESET_CONTROLLER
help
Generic Reset Controller support.
This framework is designed to abstract reset handling of devices
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
if RESET_CONTROLLER
config RESET_A10SR
tristate "Altera Arria10 System Resource Reset"
depends on MFD_ALTERA_A10SR || COMPILE_TEST
help
This option enables support for the external reset functions for
peripheral PHYs on the Altera Arria10 System Resource Chip.
config RESET_ATH79
bool "AR71xx Reset Driver" if COMPILE_TEST
default ATH79
help
This enables the ATH79 reset controller driver that supports the
AR71xx SoC reset controller.
config RESET_AXS10X
bool "AXS10x Reset Driver" if COMPILE_TEST
default ARC_PLAT_AXS10X
help
This enables the reset controller driver for AXS10x.
config RESET_BCM6345
bool "BCM6345 Reset Controller"
depends on BMIPS_GENERIC || COMPILE_TEST
default BMIPS_GENERIC
help
This enables the reset controller driver for BCM6345 SoCs.
config RESET_BERLIN
tristate "Berlin Reset Driver"
depends on ARCH_BERLIN || COMPILE_TEST
default m if ARCH_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
config RESET_BRCMSTB
tristate "Broadcom STB reset controller"
depends on ARCH_BRCMSTB || COMPILE_TEST
default ARCH_BRCMSTB
help
This enables the reset controller driver for Broadcom STB SoCs using
a SUN_TOP_CTRL_SW_INIT style controller.
config RESET_BRCMSTB_RESCAL
tristate "Broadcom STB RESCAL reset controller"
depends on HAS_IOMEM
depends on ARCH_BRCMSTB || COMPILE_TEST
default ARCH_BRCMSTB
help
This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
BCM7216.
config RESET_EYEQ
bool "Mobileye EyeQ reset controller"
depends on MACH_EYEQ5 || MACH_EYEQ6H || COMPILE_TEST
select AUXILIARY_BUS
default MACH_EYEQ5 || MACH_EYEQ6H
help
This enables the Mobileye EyeQ reset controller, used in EyeQ5, EyeQ6L
and EyeQ6H SoCs.
It has one or more domains, with a varying number of resets in each.
Registers are located in a shared register region called OLB. EyeQ6H
has multiple reset instances.
config RESET_GPIO
tristate "GPIO reset controller"
depends on GPIOLIB
help
This enables a generic reset controller for resets attached via
GPIOs. Typically for OF platforms this driver expects "reset-gpios"
property.
If compiled as module, it will be called reset-gpio.
config RESET_HSDK
bool "Synopsys HSDK Reset Driver"
depends on HAS_IOMEM
depends on ARC_SOC_HSDK || COMPILE_TEST
help
This enables the reset controller driver for HSDK board.
config RESET_IMX7
tristate "i.MX7/8 Reset Driver"
depends on HAS_IOMEM
depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST
default y if SOC_IMX7D
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
config RESET_IMX8MP_AUDIOMIX
tristate "i.MX8MP AudioMix Reset Driver"
depends on ARCH_MXC || COMPILE_TEST
select AUXILIARY_BUS
default CLK_IMX8MP
help
This enables the reset controller driver for i.MX8MP AudioMix
config RESET_INTEL_GW
bool "Intel Reset Controller Driver"
depends on X86 || COMPILE_TEST
depends on OF && HAS_IOMEM
select REGMAP_MMIO
help
This enables the reset controller driver for Intel Gateway SoCs.
Say Y to control the reset signals provided by reset controller.
Otherwise, say N.
config RESET_K210
bool "Reset controller driver for Canaan Kendryte K210 SoC"
depends on (SOC_CANAAN_K210 || COMPILE_TEST) && OF
select MFD_SYSCON
default SOC_CANAAN_K210
help
Support for the Canaan Kendryte K210 RISC-V SoC reset controller.
Say Y if you want to control reset signals provided by this
controller.
config RESET_LANTIQ
bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
default SOC_TYPE_XWAY
help
This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
help
This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
config RESET_MCHP_SPARX5
tristate "Microchip Sparx5 reset driver"
depends on ARCH_SPARX5 || SOC_LAN966 || MCHP_LAN966X_PCI || COMPILE_TEST
default y if SPARX5_SWITCH
select MFD_SYSCON
help
This driver supports switch core reset for the Microchip Sparx5 SoC.
config RESET_NPCM
bool "NPCM BMC Reset Driver" if COMPILE_TEST
default ARCH_NPCM
select AUXILIARY_BUS
help
This enables the reset controller driver for Nuvoton NPCM
BMC SoCs.
config RESET_NUVOTON_MA35D1
bool "Nuvoton MA35D1 Reset Driver"
depends on ARCH_MA35 || COMPILE_TEST
default ARCH_MA35
help
This enables the reset controller driver for Nuvoton MA35D1 SoC.
config RESET_PISTACHIO
bool "Pistachio Reset Driver"
depends on MIPS || COMPILE_TEST
help
This enables the reset driver for ImgTec Pistachio SoCs.
config RESET_POLARFIRE_SOC
bool "Microchip PolarFire SoC (MPFS) Reset Driver"
depends on MCHP_CLK_MPFS
select AUXILIARY_BUS
default MCHP_CLK_MPFS
help
This driver supports peripheral reset for the Microchip PolarFire SoC
config RESET_QCOM_AOSS
tristate "Qcom AOSS Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the AOSS (always on subsystem) reset driver
for Qualcomm SDM845 SoCs. Say Y if you want to control
reset signals provided by AOSS for Modem, Venus, ADSP,
GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
config RESET_QCOM_PDC
tristate "Qualcomm PDC Reset Driver"
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the PDC (Power Domain Controller) reset driver
for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want
to control reset signals provided by PDC for Modem, Compute,
Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS.
config RESET_RASPBERRYPI
tristate "Raspberry Pi 4 Firmware Reset Driver"
depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)
default USB_XHCI_PCI
help
Raspberry Pi 4's co-processor controls some of the board's HW
initialization process, but it's up to Linux to trigger it when
relevant. This driver provides a reset controller capable of
interfacing with RPi4's co-processor and model these firmware
initialization routines as reset lines.
config RESET_RZG2L_USBPHY_CTRL
tristate "Renesas RZ/G2L USBPHY control driver"
depends on ARCH_RZG2L || COMPILE_TEST
help
Support for USBPHY Control found on RZ/G2L family. It mainly
controls reset and power down of the USB/PHY.
config RESET_SCMI
tristate "Reset driver controlled via ARM SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
default ARM_SCMI_PROTOCOL
help
This driver provides support for reset signal/domains that are
controlled by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware controlling all the reset signals.
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST || EXPERT
default ARCH_ASPEED || ARCH_BCMBCA || ARCH_BITMAIN || ARCH_REALTEK || ARCH_SOPHGO || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC
depends on HAS_IOMEM
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
exclusive register space.
Currently this driver supports:
- Altera SoCFPGAs
- ASPEED BMC SoCs
- Bitmain BM1880 SoC
- Realtek SoCs
- RCC reset controller in STM32 MCUs
- Allwinner SoCs
- SiFive FU740 SoCs
- Sophgo SoCs
config RESET_SOCFPGA
bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
default ARM && ARCH_INTEL_SOCFPGA
select RESET_SIMPLE
help
This enables the reset driver for the SoCFPGA ARMv7 platforms. This
driver gets initialized early during platform init calls.
config RESET_SUNPLUS
bool "Sunplus SoCs Reset Driver" if COMPILE_TEST
default ARCH_SUNPLUS
help
This enables the reset driver support for Sunplus SoCs.
The reset lines that can be asserted and deasserted by toggling bits
in a contiguous, exclusive register space. The register is HIWORD_MASKED,
which means each register holds 16 reset lines.
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
select RESET_SIMPLE
help
This enables the reset driver for Allwinner SoCs.
config RESET_TI_SCI
tristate "TI System Control Interface (TI-SCI) reset driver"
depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
help
This enables the reset driver support over TI System Control Interface
available on some new TI's SoCs. If you wish to use reset resources
managed by the TI System Controller, say Y here. Otherwise, say N.
config RESET_TI_SYSCON
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
select MFD_SYSCON
help
This enables the reset driver support for TI devices with
memory-mapped reset registers as part of a syscon device node. If
you wish to use the reset framework for such memory-mapped devices,
say Y here. Otherwise, say N.
config RESET_TI_TPS380X
tristate "TI TPS380x Reset Driver"
select GPIOLIB
help
This enables the reset driver support for TI TPS380x devices. If
you wish to use the reset framework for such devices, say Y here.
Otherwise, say N.
config RESET_TN48M_CPLD
tristate "Delta Networks TN48M switch CPLD reset controller"
depends on MFD_TN48M_CPLD || COMPILE_TEST
default MFD_TN48M_CPLD
help
This enables the reset controller driver for the Delta TN48M CPLD.
It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X
switch MAC-s, Alaska OOB ethernet PHY, Quad Alaska ethernet PHY-s and
Microchip PD69200 PoE PSE controller.
This driver can also be built as a module. If so, the module will be
called reset-tn48m.
config RESET_UNIPHIER
tristate "Reset controller driver for UniPhier SoCs"
depends on ARCH_UNIPHIER || COMPILE_TEST
depends on OF && MFD_SYSCON
default ARCH_UNIPHIER
help
Support for reset controllers on UniPhier SoCs.
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
config RESET_UNIPHIER_GLUE
tristate "Reset driver in glue layer for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
Support for peripheral core reset included in its own glue layer
on UniPhier SoCs. Say Y if you want to control reset signals
provided by the glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
default ARCH_ZYNQ
help
This enables the reset controller driver for Xilinx Zynq SoCs.
config RESET_ZYNQMP
bool "ZYNQMP Reset Driver" if COMPILE_TEST
default ARCH_ZYNQMP
help
This enables the reset controller driver for Xilinx ZynqMP SoCs.
source "drivers/reset/amlogic/Kconfig"
source "drivers/reset/starfive/Kconfig"
source "drivers/reset/sti/Kconfig"
source "drivers/reset/hisilicon/Kconfig"
source "drivers/reset/tegra/Kconfig"
endif
Reference in New Issue View Git Blame Copy Permalink