Lorenzo Bianconi a542f9a04d iio: st_sensors: split open-drain parameters for irq1 and irq2 ... Define st_sensor_int_drdy structure in st_sensor_data_ready_irq in order to contain irq line parameters of the device. Moreover separate data-ready open-drain configuration parameters for INT1 and INT2 pins in st_sensor_data_ready_irq data structure. That change will be used to properly support LIS3DHH accel sensor. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-10-10 20:38:39 +01:00
..
accel	iio: st_sensors: split open-drain parameters for irq1 and irq2	2017-10-10 20:38:39 +01:00
adc	iio: adc: mcp320x: Add support for mcp3550/1/3	2017-10-09 21:01:36 +01:00
amplifiers	iio:amplifiers:ad8366 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:24:50 +01:00
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	iio: chemical: ccs811: Add support for data ready trigger	2017-09-24 12:34:36 +01:00
common	iio: st_sensors: split open-drain parameters for irq1 and irq2	2017-10-10 20:38:39 +01:00
counter	iio:stm32-lp-timer and ep93xx: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-09-26 09:38:57 +02:00
dac	iio: dac: ds4422/ds4424 dac driver	2017-10-09 20:49:39 +01:00
dummy	iio: dummy: evgen: use irq_sim	2017-10-09 20:50:34 +01:00
frequency	iio:frequency: drop assign iio_info.driver_module	2017-08-22 21:28:20 +01:00
gyro	iio: gyro: st_gyro: add SPI-3wire support to st_gyro framework	2017-10-10 20:32:28 +01:00
health	iio:health: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:29:44 +01:00
humidity	iio:humidity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:30:20 +01:00
imu	iio: imu: st_lsm6dsx: add FIFO ops data structure	2017-10-09 20:51:01 +01:00
light	iio: light: vl6180: Correct ALS scale for non-default gain/integration time	2017-10-09 20:50:21 +01:00
magnetometer	iio: magnetometer: st_magn: add SPI-3wire support to LIS3MDL	2017-10-10 20:36:33 +01:00
multiplexer	iio: multiplexer: add NULL check on devm_kzalloc() and devm_kmemdup() return values	2017-09-03 18:10:29 +01:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio:potentiometer:max5487: Drop explicit setting of module owner	2017-09-03 18:10:27 +01:00
potentiostat	iio:potentiostat:lmp91000 drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 21:34:48 +01:00
pressure	iio: st_sensors: split open-drain parameters for irq1 and irq2	2017-10-10 20:38:39 +01:00
proximity	iio:proximity: drop assign iio_info.driver_module and iio_trigger_ops.owner	2017-08-22 22:14:51 +01:00
temperature	iio:temperature: drop assignment of iio_info.driver_module	2017-08-22 22:14:52 +01:00
trigger	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	Merge 4.14-rc4 into staging-next	2017-10-09 09:02:35 +02:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c	First round of IIO new device support, features and cleanups for the 4.14 cycle.	2017-07-27 21:29:49 -07:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00