linux/drivers/iio/dac
Greg Kroah-Hartman 269b9d8faf 1st set of IIO new device support, features and cleanup for the 6.5 cycle.
New device support
 - honeywell,mprls0025pa
   * New driver and dt-bindings for this series of pressure sensors.
 - invensense,mpu6050
   * Add support for ICM 20600 IMU (ID, bindings and device data).
 - melexis,mlx90614
   * Add support for mlx90615 Infra Red Thermometer after driver cleanup
     and refactoring to support the differences in this device.
 - renesas,x9250
   * New driver and bindings for this quad potentiometer.
 - rockchip,saradc
   * Add support for RK3588. Also included is a bunch of refactoring and
     cleanup for that driver.
 - rohm,bu27008
   * New driver bindings etc for this 5 photodiode color sensor.
 - st,lsm9ds0/st,st-sensors
   * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
 - ti,opt4001
   * New driver and bindings for this ambient light sensor.
 
 Features
 - core
   * Introduce iio_validate_own_trigger() for cases where a driver can only
     consumer a trigger it registered (detected via same parent device).
     Use it in the kionix,kx022a driver and new rohm,by27008 driver.
 - dynaimage,al3320a
   * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
 - kionix,kx002a
   * Enable asynchronous probe.
 - rohm,bu27034
   * Enable asynchronous probe.
 - ti,tmp006
   * Explicit support for DT including binding documentation.
 
 Cleanups, minor fixes and misc improvements.
 - treewide
   * Switch I2C drivers from probe_new() back to probe() - part of the
     long process of getting rid of a parameter from probe()
   * Various whitespace and typo fixes not otherwise called out.
 - core
   * industrialio-buffer,Style cleanup.
   * Add documentation to extend_name field of struct iio_chan_spec to
     direct people using it towards the label infrastructure instead.
     extend_name was a design mistake a long time back so directly people
     away from it may be useful.
 - adi,ad7606
   * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
 - bosch,bma400
   * Drop pointless print of ret in a dev_err_probe() message.
 - invensense,icm42600
   * Rework timestamp handling to reduce jitter.
 - mediatek,mt7986-auxdac
   * Add DT binding for this part.
 - qcom,spmi-vadc
   * Allow for 1/16th prescaling used on a few devices.
   * Various changes to channel labeling and naming, including dropping
     use of fwnode_name which generates odd channel names. Small ABI
     change as a result, but not thought to be a problem for users of this
     platform.
 - st,lsm6dsx
   * dt-binding: Use common schema for mount-matrix via a reference.
 - st,stm32
   * Add a debug print for when legacy channel config is used.
 - ti,palmas-adc
   * Drop unused i2c.h include.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmSF83ARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foi+NRAAi8E2NRkzxteTuiFRsAokm/8HbAc/9rDq
 2Xyj8zT5B6jmqpbNKPtIbxxAxLV/JY+3HBIorvDNcOVfmOfshMpT31eaKpehxPJ3
 A00WaJ6bi7CTp0h/7QOZnZ27yr3tuJ2jpCiGKWERmTZ60kn3S/5JRrXWbfKVccyU
 DR1SrsiVSbtDhD9w6kA7HBRsL0EmTQOP/ARlUcO4SB5BOC7rj9akaN6Q6LYSafOa
 BFfTd2suekRA94mB/ugm25xAWLsl4Rdr1iNkHyaGcXaMOJZ/zWXq14y1eLbqIJIc
 am8Wu2zvo+umNzuG5DMi3gxP2B57Zhcieh6sJ5egdbxB4kh5z3jrsAFiw/MLTEME
 4Tc7uHBPFuXDdb8saxtmV2FVbC43+31FgCLivD0BGHtv0DndP7i//KCdp2aztmHo
 juyxRCw40xiul5Ihzh3NjukM0pb1inuhgblcEZVKOyaCjhur8NXoTEEcSqXczDVU
 BLHBmhQY2cKwqKWt1hbLXDs9iGlJBg0+P+P0VBsvy7WWOlvc9Hw8SryYwyBRJMYH
 LW/Wh85eIcyKaaGGEd+HQAyXwGSlrhycUSJzwdcc1IrK8TrIxn5k4BpQpeToQPjJ
 wBRRDigeciIN0K7L09N4hg+qTxtpLwFY945meAS0N60o5hZM4P40hnzL8m/Co0pH
 gx8SugY1NGk=
 =0gJ9
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for the 6.5 cycle.

New device support
- honeywell,mprls0025pa
  * New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
  * Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
  * Add support for mlx90615 Infra Red Thermometer after driver cleanup
    and refactoring to support the differences in this device.
- renesas,x9250
  * New driver and bindings for this quad potentiometer.
- rockchip,saradc
  * Add support for RK3588. Also included is a bunch of refactoring and
    cleanup for that driver.
- rohm,bu27008
  * New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
  * ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
  * New driver and bindings for this ambient light sensor.

Features
- core
  * Introduce iio_validate_own_trigger() for cases where a driver can only
    consumer a trigger it registered (detected via same parent device).
    Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
  * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
  * Enable asynchronous probe.
- rohm,bu27034
  * Enable asynchronous probe.
- ti,tmp006
  * Explicit support for DT including binding documentation.

Cleanups, minor fixes and misc improvements.
- treewide
  * Switch I2C drivers from probe_new() back to probe() - part of the
    long process of getting rid of a parameter from probe()
  * Various whitespace and typo fixes not otherwise called out.
- core
  * industrialio-buffer,Style cleanup.
  * Add documentation to extend_name field of struct iio_chan_spec to
    direct people using it towards the label infrastructure instead.
    extend_name was a design mistake a long time back so directly people
    away from it may be useful.
- adi,ad7606
  * Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
  * Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
  * Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
  * Add DT binding for this part.
- qcom,spmi-vadc
  * Allow for 1/16th prescaling used on a few devices.
  * Various changes to channel labeling and naming, including dropping
    use of fwnode_name which generates odd channel names. Small ABI
    change as a result, but not thought to be a problem for users of this
    platform.
- st,lsm6dsx
  * dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
  * Add a debug print for when legacy channel config is used.
- ti,palmas-adc
  * Drop unused i2c.h include.

* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
  dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
  dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
  dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
  iio: adc: rockchip_saradc: Use dev_err_probe
  iio: adc: rockchip_saradc: Match alignment with open parenthesis
  iio: adc: rockchip_saradc: Use of_device_get_match_data
  iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
  iio: adc: rockchip_saradc: Add support for RK3588
  iio: adc: rockchip_saradc: Add callback functions
  iio: temperature: tmp006: Add OF device matching support
  dt-bindings: iio: temperature: Add support for tmp006
  staging: iio: Switch i2c drivers back to use .probe()
  iio: amplifiers: ad8366 Fix whitespace issue
  iio: imu: inv_icm42600: avoid frequent timestamp jitter
  MAINTAINERS: Add ROHM BU27008
  iio: light: ROHM BU27008 color sensor
  iio: kx022a: Use new iio_validate_own_trigger()
  iio: trigger: Add simple trigger_validation helper
  dt-bindings: iio: light: ROHM BU27008
  iio: mlx90614: Add MLX90615 support
  ...
2023-06-15 13:01:55 +02:00
..
ad3552r.c iio:dac:ad3552r: Fix an IS_ERR() vs NULL check 2022-04-10 17:57:40 +01:00
ad5064.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ad5360.c iio: dac: ad5360: Fix alignment for DMA safety 2022-06-14 11:53:15 +01:00
ad5380.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ad5421.c iio: dac: ad5421: Fix alignment for DMA safety 2022-06-14 11:53:15 +01:00
ad5446.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ad5449.c iio: dac: ad5449: Fix alignment for DMA safety 2022-06-14 11:53:15 +01:00
ad5504.c iio: dac: ad5504: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5592r-base.c drivers: iio: dac: ad5592r: add gpio_chip names 2023-03-11 12:18:28 +00:00
ad5592r-base.h iio: dac: ad5592r: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5592r.c Char/Misc and other driver updates for 5.18-rc1 2022-03-28 12:27:35 -07:00
ad5593r.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ad5624r_spi.c iio: Replace strtobool() with kstrtobool() 2022-04-28 19:22:54 +01:00
ad5624r.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177 2019-05-30 11:29:19 -07:00
ad5686-spi.c Char/Misc and other driver updates for 5.18-rc1 2022-03-28 12:27:35 -07:00
ad5686.c iio: dac: ad5686: Add support for AD5337 2022-12-28 17:19:45 +00:00
ad5686.h iio: dac: ad5686: Add support for AD5337 2022-12-28 17:19:45 +00:00
ad5696-i2c.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ad5755.c iio: dac: ad5755: Add missing fwnode_handle_put() 2023-04-01 16:41:52 +01:00
ad5758.c iio:dac:ad5758: Drop unused of specific headers. 2021-12-12 17:12:34 +00:00
ad5761.c iio: dac: ad5761: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5764.c iio: dac: ad5764: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5766.c iio: dac: ad5766: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5770r.c iio: dac: ad5770r: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad5791.c iio: dac: ad5791: Fix alignment for DMA saftey 2022-06-14 11:53:16 +01:00
ad7293.c iio: dac: ad7293: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad7303.c iio: dac: ad7303: Fix alignment for DMA safety 2022-06-14 11:53:16 +01:00
ad8801.c iio: dac: ad8801: Fix alignment for DMA safety 2022-06-14 11:53:17 +01:00
cio-dac.c 1st set of IIO new device support, features and cleanups for the 6.4 cycle. 2023-04-12 09:45:34 +02:00
dpot-dac.c iio:dac:dpot-dac: Swap of.h for mod_devicetable.h 2021-12-12 17:12:39 +00:00
ds4424.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
Kconfig iio: dac: cio-dac: Migrate to the regmap API 2023-03-18 16:42:52 +00:00
lpc18xx_dac.c iio:dac:lpc18xx_dac: Swap from of* to mod_devicetable.h 2021-12-12 17:12:43 +00:00
ltc1660.c iio: dac: ltc1660: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() 2022-07-18 18:48:18 +01:00
ltc2632.c iio: dac: ltc2632: Make use of device properties 2022-04-28 19:34:10 +01:00
ltc2688.c iio: dac: ltc2688: Simplify using devm_regulator_*get_enable() 2022-11-23 19:44:00 +00:00
m62332.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
Makefile iio: dac: build ad5758 driver when AD5758 is selected 2023-05-13 19:18:11 +01:00
max517.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
max5522.c iio: dac: set variable max5522_channels storage-class-specifier to static 2023-04-10 12:26:34 +01:00
max5821.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
mcp4725.c 1st set of IIO new device support, features and cleanup for the 6.5 cycle. 2023-06-15 13:01:55 +02:00
mcp4922.c iio: dac: mcp4922: add support to mcp4921 2022-07-01 11:19:08 +01:00
stm32-dac-core.c iio:adc:stm32*: Use pm[_sleep]_ptr() etc to avoid need to make pm __maybe_unused 2022-02-21 19:33:04 +00:00
stm32-dac-core.h
stm32-dac.c iio: dac: stm32-dac: Replace open coded str_enable_disable() 2022-06-18 16:38:05 +01:00
ti-dac082s085.c iio: dac: ti-dac082s085: Fix alignment for DMA safety 2022-06-14 11:53:17 +01:00
ti-dac5571.c iio: Switch i2c drivers back to use .probe() 2023-05-21 18:54:53 +01:00
ti-dac7311.c iio: dac: ti-dac7311: Fix alignment for DMA safety 2022-06-14 11:53:17 +01:00
ti-dac7612.c iio: dac: ti-dac7612: Fix alignment for DMA safety 2022-06-14 11:53:17 +01:00
vf610_dac.c iio: dac: vf610_dac: explicitly add proper header files 2022-06-14 11:53:20 +01:00