.. |
include/mach
|
[ARM] pxa/income: Add Income SBC support
|
2010-06-18 15:07:34 +08:00 |
am200epd.c
|
|
|
am300epd.c
|
broadsheetfb: add multiple panel type support
|
2010-03-12 15:52:32 -08:00 |
balloon3.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
capc7117.c
|
[ARM] pxa: add support for Embedian MXM-8x10
|
2010-03-02 07:40:51 +08:00 |
clock.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
clock.h
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
cm-x2xx-pci.c
|
[ARM] pxa: use chip->ack() instead of accessing GEDR directly
|
2010-03-02 07:40:45 +08:00 |
cm-x2xx-pci.h
|
|
|
cm-x2xx.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
cm-x255.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
cm-x270.c
|
[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
|
2010-03-02 07:40:48 +08:00 |
cm-x300.c
|
[ARM] pxa/cm-x300: enable the IRQ_WAKEUP0 as wakeup source.
|
2010-08-05 14:32:18 +08:00 |
colibri-pxa3xx.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
colibri-pxa270-evalboard.c
|
[ARM] pxa/colibri270: Split module and base board code
|
2010-06-18 15:07:34 +08:00 |
colibri-pxa270-income.c
|
[ARM] pxa/income: Add Income SBC support
|
2010-06-18 15:07:34 +08:00 |
colibri-pxa270.c
|
[ARM] pxa/income: Add Income SBC support
|
2010-06-18 15:07:34 +08:00 |
colibri-pxa300.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
colibri-pxa320.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
corgi_pm.c
|
[ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings
|
2010-05-11 17:25:00 +02:00 |
corgi.c
|
[ARM] pxa/corgi: fix MMC/SD card detection failure
|
2010-06-14 18:15:24 +08:00 |
cpufreq-pxa2xx.c
|
[ARM] pxa/cpufreq: fix index assignments for end marker
|
2009-11-20 14:23:13 -06:00 |
cpufreq-pxa3xx.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
csb701.c
|
[ARM] pxa/csb701: do not register devices on non-csb726 boads
|
2009-04-04 10:26:35 +08:00 |
csb726.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
devices.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
devices.h
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
em-x270.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
eseries.c
|
[ARM] pxa: merge all eseries board code into eseries.c
|
2010-08-05 14:32:20 +08:00 |
eseries.h
|
|
|
ezx.c
|
[ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone
|
2009-12-01 09:03:03 +08:00 |
generic.c
|
[ARM] pxa: remove pxa_gpio_mode() and files
|
2010-05-11 17:25:01 +02:00 |
generic.h
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
gumstix.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
h5000.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
himalaya.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
hx4700.c
|
[ARM] pxa/hx4700: actually use platform_lcd driver
|
2009-12-01 09:03:15 +08:00 |
icontrol.c
|
Add hotplug support to mcp251x driver
|
2010-03-30 23:51:09 -07:00 |
idp.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
|
2010-03-02 07:40:46 +08:00 |
irq.c
|
[ARM] pxa: fix irq suspend/resume for pxa25x
|
2010-01-13 21:01:09 +08:00 |
Kconfig
|
[ARM] pxa: PXA_SHARPSL_DETECT_MACH_ID to include head-sharpsl.S
|
2010-08-05 14:32:23 +08:00 |
leds-idp.c
|
|
|
leds-lubbock.c
|
|
|
leds-mainstone.c
|
|
|
leds.c
|
|
|
leds.h
|
|
|
littleton.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
lpd270.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
lubbock.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
magician.c
|
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
|
2010-03-02 07:40:47 +08:00 |
mainstone.c
|
[ARM] pxa: add the missing AC97 pin configurations
|
2010-03-02 07:40:48 +08:00 |
Makefile
|
[ARM] pxa: merge all eseries board code into eseries.c
|
2010-08-05 14:32:20 +08:00 |
Makefile.boot
|
|
|
mfp-pxa2xx.c
|
[ARM] pxa: allow MFP_LPM_INPUT to be explicitly specified
|
2010-05-11 17:25:00 +02:00 |
mfp-pxa3xx.c
|
|
|
mioa701_bootresume.S
|
|
|
mioa701.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
mp900.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
mxm8x10.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
palmld.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
palmt5.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
palmtc.c
|
[ARM] pxa/palmtc: storage class should be before const qualifier
|
2010-05-31 12:03:44 +08:00 |
palmte2.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
palmtreo.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
palmtx.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
palmz72.c
|
[ARM] pxa: fix all devices using wm97xx_batt.h
|
2010-08-05 14:32:14 +08:00 |
pcm027.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
pcm990-baseboard.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
pm.c
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
|
2010-03-30 22:02:32 +09:00 |
poodle.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
pxa2xx.c
|
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
|
2009-09-10 18:49:39 +08:00 |
pxa3xx.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
pxa25x.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
pxa27x.c
|
[ARM] pxa: move pmu device back into mach-pxa/
|
2010-08-05 14:32:19 +08:00 |
pxa300.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
pxa320.c
|
ARM: Consolidate clks_register() and similar
|
2010-02-12 17:32:36 +00:00 |
pxa930.c
|
[ARM] pxa: support mfp of pxa935
|
2009-09-10 18:49:24 +08:00 |
raumfeld.c
|
[ARM] pxa/raumfeld: Check charge state after resume
|
2010-06-18 15:07:35 +08:00 |
reset.c
|
[ARM] pxa: allow gpio_reset drive high during normal work
|
2009-05-18 21:52:09 +08:00 |
saar.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
sharpsl_pm.c
|
[ARM] pxa: remove pxa_gpio_mode() and files
|
2010-05-11 17:25:01 +02:00 |
sharpsl.h
|
[ARM] pxa: remove now un-used corgi_ssp.c and corgi_lcd.c
|
2010-05-11 17:24:57 +02:00 |
sleep.S
|
|
|
smemc.c
|
|
|
spitz_pm.c
|
[ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()
|
2010-05-11 17:25:00 +02:00 |
spitz.c
|
[ARM] pxa/spitz: Correctly register WM8750
|
2010-05-31 12:03:45 +08:00 |
standby.S
|
|
|
stargate2.c
|
[ARM] pxa: merge stargate2 and imote2 board files
|
2010-08-05 14:32:16 +08:00 |
tavorevb.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
time.c
|
arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode
|
2010-01-22 17:04:52 +01:00 |
tosa-bt.c
|
rfkill: rewrite
|
2009-06-03 14:06:13 -04:00 |
tosa.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
trizeps4.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |
viper.c
|
[ARM] pxa/viper: fix timeout usage for I2C
|
2010-05-06 11:12:11 +08:00 |
vpac270.c
|
[ARM] pxa/vpac270: Add VGA modes for ADV7125
|
2010-06-18 15:07:33 +08:00 |
xcep.c
|
[ARM] pxa: allow platforms to control which uarts are registered
|
2009-12-01 09:02:55 +08:00 |
z2.c
|
[ARM] pxa/z2: Add regulator support
|
2010-08-05 14:32:24 +08:00 |
zeus.c
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
|
2010-05-20 21:04:44 -07:00 |
zylonite_pxa300.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
zylonite_pxa320.c
|
[ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot
|
2009-12-29 14:11:34 +08:00 |
zylonite.c
|
[ARM] pxa: make it clear by converting MMC 'delay_detect' to millisecond
|
2010-05-11 17:25:04 +02:00 |