mirror of
https://github.com/torvalds/linux.git
synced 2024-12-27 21:33:00 +00:00
2f3804edf9
Add support for the MPC8536 process and MPC8536DS reference board. The MPC8536 is an e500v2 based SoC which eTSEC, USB, SATA, PCI, and PCIe. The USB and SATA IP blocks are similiar to those on the PQ2 Pro SoCs and thus use the same drivers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
251 lines
8.2 KiB
C
251 lines
8.2 KiB
C
/*
|
|
* MPC85xx/86xx PCI/PCIE support routing.
|
|
*
|
|
* Copyright 2007 Freescale Semiconductor, Inc
|
|
*
|
|
* Initial author: Xianghua Xiao <x.xiao@freescale.com>
|
|
* Recode: ZHANG WEI <wei.zhang@freescale.com>
|
|
* Rewrite the routing for Frescale PCI and PCI Express
|
|
* Roy Zang <tie-fei.zang@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
|
|
/* atmu setup for fsl pci/pcie controller */
|
|
void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
|
|
{
|
|
struct ccsr_pci __iomem *pci;
|
|
int i;
|
|
|
|
pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
|
|
(u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
|
|
pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
|
|
|
|
/* Disable all windows (except powar0 since its ignored) */
|
|
for(i = 1; i < 5; i++)
|
|
out_be32(&pci->pow[i].powar, 0);
|
|
for(i = 0; i < 3; i++)
|
|
out_be32(&pci->piw[i].piwar, 0);
|
|
|
|
/* Setup outbound MEM window */
|
|
for(i = 0; i < 3; i++)
|
|
if (hose->mem_resources[i].flags & IORESOURCE_MEM){
|
|
resource_size_t pci_addr_start =
|
|
hose->mem_resources[i].start -
|
|
hose->pci_mem_offset;
|
|
pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
|
|
(u64)hose->mem_resources[i].start,
|
|
(u64)hose->mem_resources[i].end
|
|
- (u64)hose->mem_resources[i].start + 1);
|
|
out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
|
|
out_be32(&pci->pow[i+1].potear, 0);
|
|
out_be32(&pci->pow[i+1].powbar,
|
|
(hose->mem_resources[i].start >> 12));
|
|
/* Enable, Mem R/W */
|
|
out_be32(&pci->pow[i+1].powar, 0x80044000
|
|
| (__ilog2(hose->mem_resources[i].end
|
|
- hose->mem_resources[i].start + 1) - 1));
|
|
}
|
|
|
|
/* Setup outbound IO window */
|
|
if (hose->io_resource.flags & IORESOURCE_IO){
|
|
pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
|
|
"phy base 0x%016llx.\n",
|
|
(u64)hose->io_resource.start,
|
|
(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
|
|
(u64)hose->io_base_phys);
|
|
out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
|
|
out_be32(&pci->pow[i+1].potear, 0);
|
|
out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
|
|
/* Enable, IO R/W */
|
|
out_be32(&pci->pow[i+1].powar, 0x80088000
|
|
| (__ilog2(hose->io_resource.end
|
|
- hose->io_resource.start + 1) - 1));
|
|
}
|
|
|
|
/* Setup 2G inbound Memory Window @ 1 */
|
|
out_be32(&pci->piw[2].pitar, 0x00000000);
|
|
out_be32(&pci->piw[2].piwbar,0x00000000);
|
|
out_be32(&pci->piw[2].piwar, PIWAR_2G);
|
|
}
|
|
|
|
void __init setup_pci_cmd(struct pci_controller *hose)
|
|
{
|
|
u16 cmd;
|
|
int cap_x;
|
|
|
|
early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
|
|
cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
|
|
| PCI_COMMAND_IO;
|
|
early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
|
|
|
|
cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX);
|
|
if (cap_x) {
|
|
int pci_x_cmd = cap_x + PCI_X_CMD;
|
|
cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
early_write_config_word(hose, 0, 0, pci_x_cmd, cmd);
|
|
} else {
|
|
early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
|
|
}
|
|
}
|
|
|
|
static void __init setup_pci_pcsrbar(struct pci_controller *hose)
|
|
{
|
|
#ifdef CONFIG_PCI_MSI
|
|
phys_addr_t immr_base;
|
|
|
|
immr_base = get_immrbase();
|
|
early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
|
|
#endif
|
|
}
|
|
|
|
static int fsl_pcie_bus_fixup;
|
|
|
|
static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
|
|
{
|
|
/* if we aren't a PCIe don't bother */
|
|
if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
|
|
return ;
|
|
|
|
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
|
|
fsl_pcie_bus_fixup = 1;
|
|
return ;
|
|
}
|
|
|
|
int __init fsl_pcie_check_link(struct pci_controller *hose)
|
|
{
|
|
u32 val;
|
|
early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val);
|
|
if (val < PCIE_LTSSM_L0)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
void fsl_pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
|
int i;
|
|
|
|
if ((bus->parent == hose->bus) &&
|
|
((fsl_pcie_bus_fixup &&
|
|
early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) ||
|
|
(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK)))
|
|
{
|
|
for (i = 0; i < 4; ++i) {
|
|
struct resource *res = bus->resource[i];
|
|
struct resource *par = bus->parent->resource[i];
|
|
if (res) {
|
|
res->start = 0;
|
|
res->end = 0;
|
|
res->flags = 0;
|
|
}
|
|
if (res && par) {
|
|
res->start = par->start;
|
|
res->end = par->end;
|
|
res->flags = par->flags;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
int __init fsl_add_bridge(struct device_node *dev, int is_primary)
|
|
{
|
|
int len;
|
|
struct pci_controller *hose;
|
|
struct resource rsrc;
|
|
const int *bus_range;
|
|
|
|
pr_debug("Adding PCI host bridge %s\n", dev->full_name);
|
|
|
|
/* Fetch host bridge registers address */
|
|
if (of_address_to_resource(dev, 0, &rsrc)) {
|
|
printk(KERN_WARNING "Can't get pci register base!");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Get bus range if any */
|
|
bus_range = of_get_property(dev, "bus-range", &len);
|
|
if (bus_range == NULL || len < 2 * sizeof(int))
|
|
printk(KERN_WARNING "Can't get bus-range for %s, assume"
|
|
" bus 0\n", dev->full_name);
|
|
|
|
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
|
|
hose = pcibios_alloc_controller(dev);
|
|
if (!hose)
|
|
return -ENOMEM;
|
|
|
|
hose->first_busno = bus_range ? bus_range[0] : 0x0;
|
|
hose->last_busno = bus_range ? bus_range[1] : 0xff;
|
|
|
|
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
|
|
PPC_INDIRECT_TYPE_BIG_ENDIAN);
|
|
setup_pci_cmd(hose);
|
|
|
|
/* check PCI express link status */
|
|
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG |
|
|
PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
|
|
if (fsl_pcie_check_link(hose))
|
|
hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
|
|
}
|
|
|
|
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
|
|
"Firmware bus number: %d->%d\n",
|
|
(unsigned long long)rsrc.start, hose->first_busno,
|
|
hose->last_busno);
|
|
|
|
pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
|
|
hose, hose->cfg_addr, hose->cfg_data);
|
|
|
|
/* Interpret the "ranges" property */
|
|
/* This also maps the I/O region and sets isa_io/mem_base */
|
|
pci_process_bridge_OF_ranges(hose, dev, is_primary);
|
|
|
|
/* Setup PEX window registers */
|
|
setup_pci_atmu(hose, &rsrc);
|
|
|
|
/* Setup PEXCSRBAR */
|
|
setup_pci_pcsrbar(hose);
|
|
return 0;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8548, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8543, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8547E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8545, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
|
|
DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
|