Generally applications have 1 or a few waits of waiting, yet they pass
in a struct io_uring_getevents_arg every time. This needs to get copied
and, in turn, the timeout value needs to get copied.
Rather than do this for every invocation, allow the application to
register a fixed set of wait regions that can simply be indexed when
asking the kernel to wait on events.
At ring setup time, the application can register a number of these wait
regions and initialize region/index 0 upfront:
struct io_uring_reg_wait *reg;
reg = io_uring_setup_reg_wait(ring, nr_regions, &ret);
/* set timeout and mark as set, sigmask/sigmask_sz as needed */
reg->ts.tv_sec = 0;
reg->ts.tv_nsec = 100000;
reg->flags = IORING_REG_WAIT_TS;
where nr_regions >= 1 && nr_regions <= PAGE_SIZE / sizeof(*reg). The
above initializes index 0, but 63 other regions can be initialized,
if needed. Now, instead of doing:
struct __kernel_timespec timeout = { .tv_nsec = 100000, };
io_uring_submit_and_wait_timeout(ring, &cqe, nr, &t, NULL);
to wait for events for each submit_and_wait, or just wait, operation, it
can just reference the above region at offset 0 and do:
io_uring_submit_and_wait_reg(ring, &cqe, nr, 0);
to achieve the same goal of waiting 100usec without needing to copy
both struct io_uring_getevents_arg (24b) and struct __kernel_timeout
(16b) for each invocation. Struct io_uring_reg_wait looks as follows:
struct io_uring_reg_wait {
struct __kernel_timespec ts;
__u32 min_wait_usec;
__u32 flags;
__u64 sigmask;
__u32 sigmask_sz;
__u32 pad[3];
__u64 pad2[2];
};
embedding the timeout itself in the region, rather than passing it as
a pointer as well. Note that the signal mask is still passed as a
pointer, both for compatability reasons, but also because there doesn't
seem to be a lot of high frequency waits scenarios that involve setting
and resetting the signal mask for each wait.
The application is free to modify any region before a wait call, or it
can use keep multiple regions with different settings to avoid needing to
modify the same one for wait calls. Up to a page size of regions is mapped
by default, allowing PAGE_SIZE / 64 available regions for use.
The registered region must fit within a page. On a 4kb page size system,
that allows for 64 wait regions if a full page is used, as the size of
struct io_uring_reg_wait is 64b. The region registered must be aligned
to io_uring_reg_wait in size. It's valid to register less than 64
entries.
In network performance testing with zero-copy, this reduced the time
spent waiting on the TX side from 3.12% to 0.3% and the RX side from 4.4%
to 0.3%.
Wait regions are fixed for the lifetime of the ring - once registered,
they are persistent until the ring is torn down. The regions support
minimum wait timeout as well as the regular waits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In scenarios where a high frequency of wait events are seen, the copy
of the struct io_uring_getevents_arg is quite noticeable in the
profiles in terms of time spent. It can be seen as up to 3.5-4.5%.
Rewrite the copy-in logic, saving about 0.5% of the time.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This avoids intermediate storage for turning a __kernel_timespec
user pointer into an on-stack struct timespec64, only then to turn it
into a ktime_t.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Once a ring has been created, the size of the CQ and SQ rings are fixed.
Usually this isn't a problem on the SQ ring side, as it merely controls
the available number of requests that can be submitted in a single
system call, and there's rarely a need to change that.
For the CQ ring, it's a different story. For most efficient use of
io_uring, it's important that the CQ ring never overflows. This means
that applications must size it for the worst case scenario, which can
be wasteful.
Add IORING_REGISTER_RESIZE_RINGS, which allows an application to resize
the existing rings. It takes a struct io_uring_params argument, the same
one which is used to setup the ring initially, and resizes rings
according to the sizes given.
Certain properties are always inherited from the original ring setup,
like SQE128/CQE32 and other setup options. The implementation only
allows flag associated with how the CQ ring is sized and clamped.
Existing unconsumed SQE and CQE entries are copied as part of the
process. If either the SQ or CQ resized destination ring cannot hold the
entries already present in the source rings, then the operation is failed
with -EOVERFLOW. Any register op holds ->uring_lock, which prevents new
submissions, and the internal mapping holds the completion lock as well
across moving CQ ring state.
To prevent races between mmap and ring resizing, add a mutex that's
solely used to serialize ring resize and mmap. mmap_sem can't be used
here, as as fork'ed process may be doing mmaps on the ring as well.
The ctx->resize_lock is held across mmap operations, and the resize
will grab it before swapping out the already mapped new data.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abstract out a io_uring_fill_params() helper, which fills out the
necessary bits of struct io_uring_params. Add it to io_uring.h as well,
in preparation for having another internal user of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for needing this somewhere else, move the definitions
for the maximum CQ and SQ ring size into io_uring.h. Make the
rings_size() helper available as well, and have it take just the setup
flags argument rather than the fill ring pointer. That's all that is
needed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have too many helpers posting CQEs, instead of tracing completion
events before filling in a CQE and thus having to pass all the data,
set the CQE first, pass it to the tracing helper and let it extract
everything it needs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b83c1ca9ee5aed2df0f3bb743bf5ed699cce4c86.1729267437.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert to using kvmalloc/kfree() for the hash tables, and while at it,
make it handle low memory situations better.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring maintains two hash lists of inflight requests:
1) ctx->cancel_table_locked. This is used when the caller has the
ctx->uring_lock held already. This is only an issue side parameter,
as removal or task_work will always have it held.
2) ctx->cancel_table. This is used when the issuer does NOT have the
ctx->uring_lock held, and relies on the table spinlocks for access.
However, it's pretty trivial to simply grab the lock in the one spot
where we care about it, for insertion. With that, we can kill the
unlocked table (and get rid of the _locked postfix for the other one).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Apply __force cast to restricted io_req_flags_t type to fix
the following sparse warning:
io_uring/io_uring.c:2026:23: sparse: warning: cast to restricted io_req_flags_t
No functional changes intended.
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Link: https://lore.kernel.org/r/20240922104132.157055-1-minhuadotchen@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Exit the percpu ref when cache init fails to free the data memory with
in struct percpu_ref.
Fixes: 206aefde4f ("io_uring: reduce/pack size of io_ring_ctx")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240923100512.64638-1-kanie@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmbvv30QHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpj3+EACs346FzM8PlZe1GxBZ6OnQX80blwoldAxC
+Abl5xjoJKUgA7rY3lJVBRNR6olA/4I2VD3g8b3RT6lpd/oKzPFg7FOj5Dc/oN+c
Fo6C7zZdr8caokpL4pfwgyG8ZNssQgRg8e0kRSw8A7AMo1zUazqAXtxjRzeMEOLC
1kWRYGdHCbVjx+hRIyX6KKP427Z5nXvcqFOC0BOpd5jDNYVh9WjNNyUE7trkGJ7o
1cjlpaaOURS0yU/4hue6tRnM8LDjaImyTyISvBWzKfKvpc19K1alOQNvHIoIeiBQ
5MgCNkSpbRmUTrydYVEQXl0Cia2d5+0KQsavUB9nZ8M++NftbRr/i26xT8ReZzXI
NjaedDF+MyOKeJaft2ZeKH8GgWolysMBa4e89CveRxosa/6gwHCkkB4UK9b3gaBB
Fij1zh/7fIVG7Tz8yNUDyGe6DzOEol1bn1KnL35/9nuCCRnSAM0vRPwJSkurlQ8B
PqVUS3BArn+LQZmSZ3HJVKOHv2QAY8etqWizvVmu4DB9Ar+uZ6Ur2uwfMN9JAODP
Fm2qVvxS73QlrvisdbnVbTzqBnqh3Rs4mb5my/gCWO1s67qtu3abSJCSzcnyxQdd
yBMDegJxTNv6DErNjPEF4qDODwSTIzswr//kOeLns1EtDGfrK8nxUfIKPQUwLSTO
Y7h2ru83uA==
=goTY
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Mostly just a set of fixes in here, or little changes that didn't get
included in the initial pull request. This contains:
- Move the SQPOLL napi polling outside the submission lock (Olivier)
- Rename of the "copy buffers" API that got added in the 6.12 merge
window. There's really no copying going on, it's just referencing
the buffers. After a bit of consideration, decided that it was
better to simply rename this to avoid potential confusion (me)
- Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
start + len tracking rather than having start / end in there, and
by removing the caching of folio_mask when we can just calculate it
from folio_shift when we need it (me)
- Fixes for the SQPOLL affinity checking (me, Felix)
- Fix for how cqring waiting checks for the presence of task_work.
Just check it directly rather than check for a specific
notification mechanism (me)
- Tweak to how request linking is represented in tracing (me)
- Fix a syzbot report that deliberately sets up a huge list of
overflow entries, and then hits rcu stalls when flushing this list.
Just check for the need to preempt, and drop/reacquire locks in the
loop. There's no state maintained over the loop itself, and each
entry is yanked from head-of-list (me)"
* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
io_uring: check if we need to reschedule during overflow flush
io_uring: improve request linking trace
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
io_uring/sqpoll: do the napi busy poll outside the submission block
io_uring: clean up a type in io_uring_register_get_file()
io_uring/sqpoll: do not put cpumask on stack
io_uring/sqpoll: retain test for whether the CPU is valid
io_uring/rsrc: change ubuf->ubuf_end to length tracking
io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
io_uring: rename "copy buffers" to "clone buffers"
In terms of normal application usage, this list will always be empty.
And if an application does overflow a bit, it'll have a few entries.
However, nothing obviously prevents syzbot from running a test case
that generates a ton of overflow entries, and then flushing them can
take quite a while.
Check for needing to reschedule while flushing, and drop our locks and
do so if necessary. There's no state to maintain here as overflows
always prune from head-of-list, hence it's fine to drop and reacquire
the locks at the end of the loop.
Link: https://lore.kernel.org/io-uring/66ed061d.050a0220.29194.0053.GAE@google.com/
Reported-by: syzbot+5fca234bd7eb378ff78e@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now any link trace is listed as being linked after the head
request in the chain, but it's more useful to note explicitly which
request a given new request is chained to. Change the link trace to dump
the tail request so that chains are immediately apparent when looking at
traces.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If some part of the kernel adds task_work that needs executing, in terms
of signaling it'll generally use TWA_SIGNAL or TWA_RESUME. Those two
directly translate to TIF_NOTIFY_SIGNAL or TIF_NOTIFY_RESUME, and can
be used for a variety of use case outside of task_work.
However, io_cqring_wait_schedule() only tests explicitly for
TIF_NOTIFY_SIGNAL. This means it can miss if task_work got added for
the task, but used a different kind of signaling mechanism (or none at
all). Normally this doesn't matter as any task_work will be run once
the task exits to userspace, except if:
1) The ring is setup with DEFER_TASKRUN
2) The local work item may generate normal task_work
For condition 2, this can happen when closing a file and it's the final
put of that file, for example. This can cause stalls where a task is
waiting to make progress inside io_cqring_wait(), but there's nothing else
that will wake it up. Hence change the "should we schedule or loop around"
check to check for the presence of task_work explicitly, rather than just
TIF_NOTIFY_SIGNAL as the mechanism. While in there, also change the
ordering of what type of task_work first in terms of ordering, to both
make it consistent with other task_work runs in io_uring, but also to
better handle the case of defer task_work generating normal task_work,
like in the above example.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Link: https://github.com/axboe/liburing/issues/1235
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmbn5g0ACgkQu+CwddJF
iJq+Uwf/aqnLNEpjUBzwUUhSojCpPnTtiyjv+AILTxoSTHmbu8OvN0W79+Rpbdmk
O4QapAK+BCs+VL2VATwCCufcJ75Z78txO+buQE0DgwluFTIYZ+IwpUMPsK04ln6A
FD1/uvP1QFx60heqcp2c4zWFBUpg4DE6ufx2A5kieO268lFcWLxyVlcdgRU79ZCt
uAcV2yDLk3GvPGfxZwPKEmZUo/FmuSoBv0XgT+eWxmTu/R7hcpFse49OyjBH8Tvb
8d/RCIFgXOr8dTIjtds7eenwB/is4TkRlctezEQ0jO9/JwL/BVOgXZjD1qCtNWqz
is4TWK7VV+vdq1RD+0xC2hV/+uGEwQ==
=+WAm
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"This time it's mostly refactoring and improving APIs for slab users in
the kernel, along with some debugging improvements.
- kmem_cache_create() refactoring (Christian Brauner)
Over the years have been growing new parameters to
kmem_cache_create() where most of them are needed only for a small
number of caches - most recently the rcu_freeptr_offset parameter.
To avoid adding new parameters to kmem_cache_create() and adjusting
all its callers, or creating new wrappers such as
kmem_cache_create_rcu(), we can now pass extra parameters using the
new struct kmem_cache_args. Not explicitly initialized fields
default to values interpreted as unused.
kmem_cache_create() is for now a wrapper that works both with the
new form: kmem_cache_create(name, object_size, args, flags) and the
legacy form: kmem_cache_create(name, object_size, align, flags,
ctor)
- kmem_cache_destroy() waits for kfree_rcu()'s in flight (Vlastimil
Babka, Uladislau Rezki)
Since SLOB removal, kfree() is allowed for freeing objects
allocated by kmem_cache_create(). By extension kfree_rcu() as
allowed as well, which can allow converting simple call_rcu()
callbacks that only do kmem_cache_free(), as there was never a
kmem_cache_free_rcu() variant. However, for caches that can be
destroyed e.g. on module removal, the cache owners knew to issue
rcu_barrier() first to wait for the pending call_rcu()'s, and this
is not sufficient for pending kfree_rcu()'s due to its internal
batching optimizations. Ulad has provided a new
kvfree_rcu_barrier() and to make the usage less error-prone,
kmem_cache_destroy() calls it. Additionally, destroying
SLAB_TYPESAFE_BY_RCU caches now again issues rcu_barrier()
synchronously instead of using an async work, because the past
motivation for async work no longer applies. Users of custom
call_rcu() callbacks should however keep calling rcu_barrier()
before cache destruction.
- Debugging use-after-free in SLAB_TYPESAFE_BY_RCU caches (Jann Horn)
Currently, KASAN cannot catch UAFs in such caches as it is legal to
access them within a grace period, and we only track the grace
period when trying to free the underlying slab page. The new
CONFIG_SLUB_RCU_DEBUG option changes the freeing of individual
object to be RCU-delayed, after which KASAN can poison them.
- Delayed memcg charging (Shakeel Butt)
In some cases, the memcg is uknown at allocation time, such as
receiving network packets in softirq context. With
kmem_cache_charge() these may be now charged later when the user
and its memcg is known.
- Misc fixes and improvements (Pedro Falcato, Axel Rasmussen,
Christoph Lameter, Yan Zhen, Peng Fan, Xavier)"
* tag 'slab-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm, slab: restore kerneldoc for kmem_cache_create()
io_uring: port to struct kmem_cache_args
slab: make __kmem_cache_create() static inline
slab: make kmem_cache_create_usercopy() static inline
slab: remove kmem_cache_create_rcu()
file: port to struct kmem_cache_args
slab: create kmem_cache_create() compatibility layer
slab: port KMEM_CACHE_USERCOPY() to struct kmem_cache_args
slab: port KMEM_CACHE() to struct kmem_cache_args
slab: remove rcu_freeptr_offset from struct kmem_cache
slab: pass struct kmem_cache_args to do_kmem_cache_create()
slab: pull kmem_cache_open() into do_kmem_cache_create()
slab: pass struct kmem_cache_args to create_cache()
slab: port kmem_cache_create_usercopy() to struct kmem_cache_args
slab: port kmem_cache_create_rcu() to struct kmem_cache_args
slab: port kmem_cache_create() to struct kmem_cache_args
slab: add struct kmem_cache_args
slab: s/__kmem_cache_create/do_kmem_cache_create/g
memcg: add charging of already allocated slab objects
mm/slab: Optimize the code logic in find_mergeable()
...
When an io_uring request needs blocking context we offload it to the
io_uring's thread pool called io-wq. We can get there off ->uring_cmd
by returning -EAGAIN, but there is no straightforward way of doing that
from an asynchronous callback. Add a helper that would transfer a
command to a blocking context.
Note, we do an extra hop via task_work before io_queue_iowq(), that's a
limitation of io_uring infra we have that can likely be lifted later
if that would ever become a problem.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f735f807d7c8ba50c9452c69dfe5d3e9e535037b.1726072086.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for needing the consumed length, pass in the length being
completed. Unused right now, but will be used when it is possible to
partially consume a buffer.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose min_wait_usec in io_uring_getevents_arg, replacing the pad member
that is currently in there. The value is in usecs, which is explained in
the name as well.
Note that if min_wait_usec and a normal timeout is used in conjunction,
the normal timeout is still relative to the base time. For example, if
min_wait_usec is set to 100 and the normal timeout is 1000, the max
total time waited is still 1000. This also means that if the normal
timeout is shorter than min_wait_usec, then only the min_wait_usec will
take effect.
See previous commit for an explanation of how this works.
IORING_FEAT_MIN_TIMEOUT is added as a feature flag for this, as
applications doing submit_and_wait_timeout() style operations will
generally not see the -EINVAL from the wait side as they return the
number of IOs submitted. Only if no IOs are submitted will the -EINVAL
bubble back up to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Waiting for events with io_uring has two knobs that can be set:
1) The number of events to wake for
2) The timeout associated with the event
Waiting will abort when either of those conditions are met, as expected.
This adds support for a third event, which is associated with the number
of events to wait for. Applications generally like to handle batches of
completions, and right now they'd set a number of events to wait for and
the timeout for that. If no events have been received but the timeout
triggers, control is returned to the application and it can wait again.
However, if the application doesn't have anything to do until events are
reaped, then it's possible to make this waiting more efficient.
For example, the application may have a latency time of 50 usecs and
wanting to handle a batch of 8 requests at the time. If it uses 50 usecs
as the timeout, then it'll be doing 20K context switches per second even
if nothing is happening.
This introduces the notion of min batch wait time. If the min batch wait
time expires, then we'll return to userspace if we have any events at all.
If none are available, the general wait time is applied. Any request
arriving after the min batch wait time will cause waiting to stop and
return control to the application.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for expanding how we handle waits, move the actual
schedule and schedule_timeout() handling into a helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than need to pass in 2 or 3 separate arguments, add a struct
to encapsulate the timeout and sigset_t parts of waiting. In preparation
for adding another argument for waiting.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new registration opcode IORING_REGISTER_CLOCK, which allows the
user to select which clock id it wants to use with CQ waiting timeouts.
It only allows a subset of all posix clocks and currently supports
CLOCK_MONOTONIC and CLOCK_BOOTTIME.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/98f2bc8a3c36cdf8f0e6a275245e81e903459703.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In addition to current relative timeouts for the waiting loop, where the
timespec argument specifies the maximum time it can wait for, add
support for the absolute mode, with the value carrying a CLOCK_MONOTONIC
absolute time until which we should return control back to the user.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4d5b74d67ada882590b2e42aa3aa7117bbf6b55f.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_napi_adjust_timeout() and move the adjustments out of the
common path into __io_napi_busy_loop(). Now the limit it's calculated
based on struct io_wait_queue::timeout, for which we query current time
another time. The overhead shouldn't be a problem, it's a polling path,
however that can be optimised later by additionally saving the delta
time value in io_cqring_wait().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e14686e245b3b42ff90a3c4d70895d48676206.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a difference in how io_queue_sqe and io_wq_submit_work treat
error codes they get from io_issue_sqe. The first one fails anything
unknown but latter only fails when the code is negative.
It doesn't make sense to have this discrepancy, align them to the
io_queue_sqe behaviour.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c550e152bf4a290187f91a4322ddcb5d6d1f2c73.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cancel_generic() should retry if any state changes like a
request is completed, however in case of a task exit it only goes for
another loop and avoids schedule() if any tracked (i.e. REQ_F_INFLIGHT)
request got completed.
Let's assume we have a non-tracked request executing in iowq and a
tracked request linked to it. Let's also assume
io_uring_cancel_generic() fails to find and cancel the request, i.e.
via io_run_local_work(), which may happen as io-wq has gaps.
Next, the request logically completes, io-wq still hold a ref but queues
it for completion via tw, which happens in
io_uring_try_cancel_requests(). After, right before prepare_to_wait()
io-wq puts the request, grabs the linked one and tries executes it, e.g.
arms polling. Finally the cancellation loop calls prepare_to_wait(),
there are no tw to run, no tracked request was completed, so the
tctx_inflight() check passes and the task is put to indefinite sleep.
Cc: stable@vger.kernel.org
Fixes: 3f48cf18f8 ("io_uring: unify files and task cancel")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/acac7311f4e02ce3c43293f8f1fda9c705d158f1.1721819383.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=50CO
-----END PGP SIGNATURE-----
Merge tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"Here are the io_uring updates queued up for 6.11.
Nothing major this time around, various minor improvements and
cleanups/fixes. This contains:
- Add bind/listen opcodes. Main motivation is to support direct
descriptors, to avoid needing a regular fd just for doing these two
operations (Gabriel)
- Probe fixes (Gabriel)
- Treat io-wq work flags as atomics. Not fixing a real issue, but may
as well and it silences a KCSAN warning (me)
- Cleanup of rsrc __set_current_state() usage (me)
- Add 64-bit for {m,f}advise operations (me)
- Improve performance of data ring messages (me)
- Fix for ring message overflow posting (Pavel)
- Fix for freezer interaction with TWA_NOTIFY_SIGNAL. Not strictly an
io_uring thing, but since TWA_NOTIFY_SIGNAL was originally added
for faster task_work signaling for io_uring, bundling it with this
pull (Pavel)
- Add Pavel as a co-maintainer
- Various cleanups (me, Thorsten)"
* tag 'for-6.11/io_uring-20240714' of git://git.kernel.dk/linux: (28 commits)
io_uring/net: check socket is valid in io_bind()/io_listen()
kernel: rerun task_work while freezing in get_signal()
io_uring/io-wq: limit retrying worker initialisation
io_uring/napi: Remove unnecessary s64 cast
io_uring/net: cleanup io_recv_finish() bundle handling
io_uring/msg_ring: fix overflow posting
MAINTAINERS: change Pavel Begunkov from io_uring reviewer to maintainer
io_uring/msg_ring: use kmem_cache_free() to free request
io_uring/msg_ring: check for dead submitter task
io_uring/msg_ring: add an alloc cache for io_kiocb entries
io_uring/msg_ring: improve handling of target CQE posting
io_uring: add io_add_aux_cqe() helper
io_uring: add remote task_work execution helper
io_uring/msg_ring: tighten requirement for remote posting
io_uring: Allocate only necessary memory in io_probe
io_uring: Fix probe of disabled operations
io_uring: Introduce IORING_OP_LISTEN
io_uring: Introduce IORING_OP_BIND
net: Split a __sys_listen helper for io_uring
net: Split a __sys_bind helper for io_uring
...
The caller of io_cqring_event_overflow() should be holding the
completion_lock, which is violated by io_msg_tw_complete. There
is only one caller of io_add_aux_cqe(), so just add locking there
for now.
WARNING: CPU: 0 PID: 5145 at io_uring/io_uring.c:703 io_cqring_event_overflow+0x442/0x660 io_uring/io_uring.c:703
RIP: 0010:io_cqring_event_overflow+0x442/0x660 io_uring/io_uring.c:703
<TASK>
__io_post_aux_cqe io_uring/io_uring.c:816 [inline]
io_add_aux_cqe+0x27c/0x320 io_uring/io_uring.c:837
io_msg_tw_complete+0x9d/0x4d0 io_uring/msg_ring.c:78
io_fallback_req_func+0xce/0x1c0 io_uring/io_uring.c:256
process_one_work kernel/workqueue.c:3224 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3305
worker_thread+0x86d/0xd40 kernel/workqueue.c:3383
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:144
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Fixes: f33096a3c9 ("io_uring: add io_add_aux_cqe() helper")
Reported-by: syzbot+f7f9c893345c5c615d34@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/c7350d07fefe8cce32b50f57665edbb6355ea8c1.1719927398.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before SQPOLL was transitioned to managing its own task_work, the core
used TWA_SIGNAL_NO_IPI to ensure that task_work was processed. If not,
we can't be sure that all task_work is processed at SQPOLL thread exit
time.
Fixes: af5d68f889 ("io_uring/sqpoll: manage task_work privately")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With slab accounting, allocating and freeing memory has considerable
overhead. Add a basic alloc cache for the io_kiocb allocations that
msg_ring needs to do. Unlike other caches, this one is used by the
sender, grabbing it from the remote ring. When the remote ring gets
the posted completion, it'll free it locally. Hence it is separately
locked, using ctx->msg_lock.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This helper will post a CQE, and can be called from task_work where we
now that the ctx is already properly locked and that deferred
completions will get flushed later on.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
All our task_work handling is targeted at the state in the io_kiocb
itself, which is what it is being used for. However, MSG_RING rolls its
own task_work handling, ignoring how that is usually done.
In preparation for switching MSG_RING to be able to use the normal
task_work handling, add io_req_task_work_add_remote() which allows the
caller to pass in the target io_ring_ctx.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The work flags can be set/accessed from different tasks, both the
originator of the request, and the io-wq workers. While modifications
aren't concurrent, it still makes KMSAN unhappy. There's no real
downside to just making the flag reading/manipulation use proper
atomics here.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_submit_flush_completions() assigns ctx->submit_state to a local
variable and uses it in all but one spot, switch that forgotten
statement to using 'state' as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is pretty nicely abstracted already, but let's move it to a separate
file rather than have it in the main io_uring file. With that, we can
also move the io_ev_fd struct and enum out of global scope.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some ways, it just "happens to work" currently with using the ops
field for both the free and signaling bit. But it depends on ordering
of operations in terms of freeing and signaling. Clean it up and use the
usual refs == 0 under RCU read side lock to determine if the ev_fd is
still valid, and use the reference to gate the freeing as well.
Fixes: 21a091b970 ("io_uring: signal registered eventfd to process deferred task work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.
It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.
Fixes: 521223d7c2 ("io_uring/cancel: don't default to setting req->work.cancel_seq")
Cc: stable@vger.kernel.org
Reported-by: Li Shi <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the 5.12 kernel release, nobody has been passing NULL as the
sq_offset pointer. Remove the checks for it being NULL or not, it will
always be valid.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=DwAV
-----END PGP SIGNATURE-----
Merge tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
- Greatly improve send zerocopy performance, by enabling coalescing of
sent buffers.
MSG_ZEROCOPY already does this with send(2) and sendmsg(2), but the
io_uring side did not. In local testing, the crossover point for send
zerocopy being faster is now around 3000 byte packets, and it
performs better than the sync syscall variants as well.
This feature relies on a shared branch with net-next, which was
pulled into both branches.
- Unification of how async preparation is done across opcodes.
Previously, opcodes that required extra memory for async retry would
allocate that as needed, using on-stack state until that was the
case. If async retry was needed, the on-stack state was adjusted
appropriately for a retry and then copied to the allocated memory.
This led to some fragile and ugly code, particularly for read/write
handling, and made storage retries more difficult than they needed to
be. Allocate the memory upfront, as it's cheap from our pools, and
use that state consistently both initially and also from the retry
side.
- Move away from using remap_pfn_range() for mapping the rings.
This is really not the right interface to use and can cause lifetime
issues or leaks. Additionally, it means the ring sq/cq arrays need to
be physically contigious, which can cause problems in production with
larger rings when services are restarted, as memory can be very
fragmented at that point.
Move to using vm_insert_page(s) for the ring sq/cq arrays, and apply
the same treatment to mapped ring provided buffers. This also helps
unify the code we have dealing with allocating and mapping memory.
Hard to see in the diffstat as we're adding a few features as well,
but this kills about ~400 lines of code from the codebase as well.
- Add support for bundles for send/recv.
When used with provided buffers, bundles support sending or receiving
more than one buffer at the time, improving the efficiency by only
needing to call into the networking stack once for multiple sends or
receives.
- Tweaks for our accept operations, supporting both a DONTWAIT flag for
skipping poll arm and retry if we can, and a POLLFIRST flag that the
application can use to skip the initial accept attempt and rely
purely on poll for triggering the operation. Both of these have
identical flags on the receive side already.
- Make the task_work ctx locking unconditional.
We had various code paths here that would do a mix of lock/trylock
and set the task_work state to whether or not it was locked. All of
that goes away, we lock it unconditionally and get rid of the state
flag indicating whether it's locked or not.
The state struct still exists as an empty type, can go away in the
future.
- Add support for specifying NOP completion values, allowing it to be
used for error handling testing.
- Use set/test bit for io-wq worker flags. Not strictly needed, but
also doesn't hurt and helps silence a KCSAN warning.
- Cleanups for io-wq locking and work assignments, closing a tiny race
where cancelations would not be able to find the work item reliably.
- Misc fixes, cleanups, and improvements
* tag 'for-6.10/io_uring-20240511' of git://git.kernel.dk/linux: (97 commits)
io_uring: support to inject result for NOP
io_uring: fail NOP if non-zero op flags is passed in
io_uring/net: add IORING_ACCEPT_POLL_FIRST flag
io_uring/net: add IORING_ACCEPT_DONTWAIT flag
io_uring/filetable: don't unnecessarily clear/reset bitmap
io_uring/io-wq: Use set_bit() and test_bit() at worker->flags
io_uring/msg_ring: cleanup posting to IOPOLL vs !IOPOLL ring
io_uring: Require zeroed sqe->len on provided-buffers send
io_uring/notif: disable LAZY_WAKE for linked notifs
io_uring/net: fix sendzc lazy wake polling
io_uring/msg_ring: reuse ctx->submitter_task read using READ_ONCE instead of re-reading it
io_uring/rw: reinstate thread check for retries
io_uring/notif: implement notification stacking
io_uring/notif: simplify io_notif_flush()
net: add callback for setting a ubuf_info to skb
net: extend ubuf_info callback to ops structure
io_uring/net: support bundles for recv
io_uring/net: support bundles for send
io_uring/kbuf: add helpers for getting/peeking multiple buffers
io_uring/net: add provided buffer support for IORING_OP_SEND
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZj3HuwAKCRCRxhvAZXjc
orYvAQCZOr68uJaEaXAArYTdnMdQ6HIzG+FVlwrqtrhz0BV07wEAqgmtSR9XKh+L
0+DNepg4R8PZOHH371eSSsLNRCUCkAs=
=SVsU
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual fses.
Features:
- Free up FMODE_* bits. I've freed up bits 6, 7, 8, and 24. That
means we now have six free FMODE_* bits in total (but bit #6
already got used for FMODE_WRITE_RESTRICTED)
- Add FOP_HUGE_PAGES flag (follow-up to FMODE_* cleanup)
- Add fd_raw cleanup class so we can make use of automatic cleanup
provided by CLASS(fd_raw, f)(fd) for O_PATH fds as well
- Optimize seq_puts()
- Simplify __seq_puts()
- Add new anon_inode_getfile_fmode() api to allow specifying f_mode
instead of open-coding it in multiple places
- Annotate struct file_handle with __counted_by() and use
struct_size()
- Warn in get_file() whether f_count resurrection from zero is
attempted (epoll/drm discussion)
- Folio-sophize aio
- Export the subvolume id in statx() for both btrfs and bcachefs
- Relax linkat(AT_EMPTY_PATH) requirements
- Add F_DUPFD_QUERY fcntl() allowing to compare two file descriptors
for dup*() equality replacing kcmp()
Cleanups:
- Compile out swapfile inode checks when swap isn't enabled
- Use (1 << n) notation for FMODE_* bitshifts for clarity
- Remove redundant variable assignment in fs/direct-io
- Cleanup uses of strncpy in orangefs
- Speed up and cleanup writeback
- Move fsparam_string_empty() helper into header since it's currently
open-coded in multiple places
- Add kernel-doc comments to proc_create_net_data_write()
- Don't needlessly read dentry->d_flags twice
Fixes:
- Fix out-of-range warning in nilfs2
- Fix ecryptfs overflow due to wrong encryption packet size
calculation
- Fix overly long line in xfs file_operations (follow-up to FMODE_*
cleanup)
- Don't raise FOP_BUFFER_{R,W}ASYNC for directories in xfs (follow-up
to FMODE_* cleanup)
- Don't call xfs_file_open from xfs_dir_open (follow-up to FMODE_*
cleanup)
- Fix stable offset api to prevent endless loops
- Fix afs file server rotations
- Prevent xattr node from overflowing the eraseblock in jffs2
- Move fdinfo PTRACE_MODE_READ procfs check into the .permission()
operation instead of .open() operation since this caused userspace
regressions"
* tag 'vfs-6.10.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
afs: Fix fileserver rotation getting stuck
selftests: add F_DUPDFD_QUERY selftests
fcntl: add F_DUPFD_QUERY fcntl()
file: add fd_raw cleanup class
fs: WARN when f_count resurrection is attempted
seq_file: Simplify __seq_puts()
seq_file: Optimize seq_puts()
proc: Move fdinfo PTRACE_MODE_READ check into the inode .permission operation
fs: Create anon_inode_getfile_fmode()
xfs: don't call xfs_file_open from xfs_dir_open
xfs: drop fop_flags for directories
xfs: fix overly long line in the file_operations
shmem: Fix shmem_rename2()
libfs: Add simple_offset_rename() API
libfs: Fix simple_offset_rename_exchange()
jffs2: prevent xattr node from overflowing the eraseblock
vfs, swap: compile out IS_SWAPFILE() on swapless configs
vfs: relax linkat() AT_EMPTY_PATH - aka flink() - requirements
fs/direct-io: remove redundant assignment to variable retval
fs/dcache: Re-use value stored to dentry->d_flags instead of re-reading
...
Allowing retries for everything is arguably the right thing to do, now
that every command type is async read from the start. But it's exposed a
few issues around missing check for a retry (which cca6571381 exposed),
and the fixup commit for that isn't necessarily 100% sound in terms of
iov_iter state.
For now, just revert these two commits. This unfortunately then re-opens
the fact that -EAGAIN can get bubbled to userspace for some cases where
the kernel very well could just sanely retry them. But until we have all
the conditions covered around that, we cannot safely enable that.
This reverts commit df604d2ad4.
This reverts commit cca6571381.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_OP_RECV is used with provided buffers, the caller may also set
IORING_RECVSEND_BUNDLE to turn it into a multi-buffer recv. This grabs
buffers available and receives into them, posting a single completion for
all of it.
This can be used with multishot receive as well, or without it.
Now that both send and receive support bundles, add a feature flag for
it as well. If IORING_FEAT_RECVSEND_BUNDLE is set after registering the
ring, then the kernel supports bundles for recv and send.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A previous commit removed the checking on whether or not it was possible
to retry a request, since it's now possible to retry any of them. This
would previously have caused the request to have been ended with an error,
but now the retry condition can simply get lost instead.
Cleanup the retry handling and always just punt it to task_work, which
will queue it with io-wq appropriately.
Reported-by: Changhui Zhong <czhong@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Fixes: cca6571381 ("io_uring/rw: cleanup retry path")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
