kernel/irq/ is only built when CONFIG_GENERIC_HARDIRQS=y. So making
code inside of kernel/irq/ conditional on CONFIG_GENERIC_HARDIRQS is
pointless.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
These callbacks are only called in the syscore suspend/resume code on
interrupt chips which have been registered via the generic irq chip
mechanism. Calling those callbacks per irq would be rather icky, but
with the generic irq chip mechanism we can call this per registered
chip.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Implement a generic interrupt chip, which is configurable and is able
to handle the most common irq chip implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by; Kevin Hilman <khilman@ti.com>
This adds support for disabling threading on a per-IRQ basis via the IRQ
status instead of the IRQ flow, which is necessary for interrupts that
don't follow the natural IRQ flow channels, such as those that are
virtually created.
The new APIs added are simply:
irq_set_thread()
irq_set_nothread()
which follow the rest of the IRQ status routines.
Chained handlers also have IRQ_NOTHREAD set on them automatically, making
the lack of threading explicit rather than implicit. Subsequently, the
nothread flag can be viewed through the standard genirq debugging
facilities.
[ tglx: Fixed cleanup fallout ]
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/%3C20110406210135.GF18426%40linux-sh.org%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86-32, fpu: Fix FPU exception handling on non-SSE systems
x86, hibernate: Initialize mmu_cr4_features during boot
x86-32, NUMA: Fix ACPI NUMA init broken by recent x86-64 change
x86: visws: Fixup irq overhaul fallout
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Clean up rebalance_domains() load-balance interval calculation
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86/mrst/vrtc: Fix boot crash in mrst_rtc_init()
rtc, x86/mrst/vrtc: Fix boot crash in rtc_read_alarm()
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Fix cpumask leak in __setup_irq()
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix listing incorrect line number with inline function
perf probe: Fix to find recursively inlined function
perf probe: Fix multiple --vars options behavior
perf probe: Fix to remove redundant close
perf probe: Fix to ensure function declared file
The allocated cpumask should be freed in __setup_irq().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
LKML-Reference: <1301744375-6812-1-git-send-email-dfeng@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The only subtle difference is that alpha uses ACTUAL_NR_IRQS and
prints the IRQF_DISABLED flag.
Change the generic implementation to deal with ACTUAL_NR_IRQS if
defined.
The IRQF_DISABLED printing is pointless, as we nowadays run all
interrupts with irqs disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The late night fixup missed to convert the data type from irq_desc to
irq_data, which results in a harmless but annoying warning.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity
related functions and the IRQ_LEVEL propagation into irq_data
state. Did not pop up on my main test platforms. :(
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Fix new irq-related kernel-doc warnings in 2.6.38:
Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>
The .irq_cpu_online() and .irq_cpu_offline() functions may need to
adjust affinity, but they are called with the descriptor lock held.
Create __irq_set_affinity_locked() which is called with the lock held.
Make irq_set_affinity() just a wrapper that acquires the lock.
[ tglx: Changed the argument to irq_data, added a !desc check and
moved the !irq_set_affinity check where it belongs ]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-4-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a flag which indicates that the on/offline callback should only be
called on enabled interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ tglx: Removed the enabled argument as this is now available in
irq_data ]
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-3-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some irq_chip implementation require to know the disabled state of the
interrupt in certain callbacks. Add a state flag and accessor to
irq_data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The helper macros and functions like for_each_active_irq() don't work
unless the irq is in the allocated_irqs set.
In the case of !CONFIG_SPARSE_IRQ, instead of forcing all users of the
irq infrastructure to explicitly call irq_reserve_irq(), do it for
them.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-2-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some archs want to print extra information for certain irq_chips which
is per irq and not per chip. Allow them to provide a chip callback to
print the chip name and the extra information.
PowerPC wants to print the LEVEL/EDGE type information. Make it configurable.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
goto out_thread is called before we take the lock. It causes a gcc
warning: "kernel/irq/manage.c:858: warning: ‘flags’ may be used
uninitialized in this function"
[ tglx: Moved unlock before free_cpumask_var() ]
Signed-off-by: Dan Carpenter <error27@gmail.com>
LKML-Reference: <20110317114307.GJ2008@bicker>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On suspend we disable all interrupts in the core code, but this does
not mask the interrupt line in the default implementation as we use a
lazy disable approach. That means we mark the interrupt disabled, but
leave the hardware unmasked. That's an optimization because we avoid
the hardware access for the common case where no interrupt happens
after we marked it disabled. If an interrupt happens, then the
interrupt flow handler masks the line at the hardware level and marks
it pending.
Suspend makes use of this delayed disable as it "disables" all
interrupts when preparing the suspend transition. Right before the
system goes into hardware suspend state it checks whether one of the
interrupts which is marked as a wakeup interrupt came in after
disabling it.
Most interrupt chips have a separate register which selects the
interrupts which can wake up the system from suspend, so we don't have
to mask any on the non wakeup interrupts.
But now we have to deal with brilliant designed hardware which lacks
such a wakeup configuration facility. For such hardware it's necessary
to mask all non wakeup interrupts before going into suspend in order
to avoid the wakeup from random interrupts.
Rather than working around this in the affected interrupt chip
implementations we can solve this elegant in the core code itself.
Add a flag IRQCHIP_MASK_ON_SUSPEND which can be set by the irq chip
implementation to indicate, that the interrupts which are not selected
as wakeup sources must be masked in the suspend path. Mask them in the
loop which checks the wakeup interrupts pending flag.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
LKML-Reference: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6>
The fasteoi handler must mask the interrupt line in oneshot mode
otherwise we end up with an irq storm.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add a commandline parameter "threadirqs" which forces all interrupts except
those marked IRQF_NO_THREAD to run threaded. That's mostly a debug option to
allow retrieving better debug data from crashing interrupt handlers. If
"threadirqs" is not enabled on the kernel command line, then there is no
impact in the interrupt hotpath.
Architecture code needs to select CONFIG_IRQ_FORCED_THREADING after
marking the interrupts which cant be threaded IRQF_NO_THREAD. All
interrupts which have IRQF_TIMER set are implict marked
IRQF_NO_THREAD. Also all PER_CPU interrupts are excluded.
Forced threading hard interrupts also forces all soft interrupt
handling into thread context.
When enabled it might slow down things a bit, but for debugging problems in
interrupt code it's a reasonable penalty as it does not immediately
crash and burn the machine when an interrupt handler is buggy.
Some test results on a Core2Duo machine:
Cache cold run of:
# time git grep irq_desc
non-threaded threaded
real 1m18.741s 1m19.061s
user 0m1.874s 0m1.757s
sys 0m5.843s 0m5.427s
# iperf -c server
non-threaded
[ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 933 Mbits/sec
threaded
[ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 934 Mbits/sec
[ 3] 0.0-10.0 sec 1.09 GBytes 937 Mbits/sec
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.772668648@linutronix.de>
Support ONESHOT on shared interrupts, if all drivers agree on it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.483640430@linutronix.de>
For level type interrupts we need to track how many threads are on
flight to avoid useless interrupt storms when not all thread handlers
have finished yet. Keep track of the woken threads and only unmask
when there are no more threads in flight.
Yes, I'm lazy and using a bitfield. But not only because I'm lazy, the
main reason is that it's way simpler than using a refcount. A refcount
based solution would need to keep track of various things like
crashing the irq thread, spurious interrupts coming in,
disables/enables, free_irq() and some more. The bitfield keeps the
tracking simple and makes things just work. It's also nicely confined
to the thread code pathes and does not require additional checks all
over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20110223234956.388095876@linutronix.de>
The WARN_ON_ONCE in handle_percpu_event() which emits a warning when
an action handler returns with interrupts enabled is not really
useful. It does not reveal the interrupt number and handler function
which caused it. Make it WARN_ONCE() and add the information.
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
"def_bool n" without prompt is pointless, these should be just "bool".
[ tglx: Adapted to latest changes ]
Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4D5D3309020000780003264A@vpn.id2.novell.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
note_interrupt wants to be called with the combined result of all
handlers called, not with the last one. If it's a shared interrupt
then the last handler might return IRQ_NONE often enough to trigger
the spurious dectector which turns off a perfectly fine working
interrupt line. Bug was introduced in commit 1277a532(genirq: Simplify
handle_irq_event()).
Yes, I really messed up there. First the variable ret should not have
been named differently to avoid similarity with retval. Second it
should have been declared in the do {} loop.
Rename it to res and move it into the do {} loop and vanish under a
huge brown paperbag.
Reported-bisected-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The switch case in __irq_set_trigger() lacks a break, which emits a
pr_err unconditionally on success.
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The runtime expansion of nr_irqs does not take into account that
bitmap_find_next_zero_area() returns "start" + size in case the search
for an matching zero area fails. That results in a start value which
can be completely off and is not covered by the following
expand_nr_irqs() and possibly outside of the absolute limit. But we
use it without further checking.
Use IRQ_BITMAP_BITS as the limit for the bitmap search and expand
nr_irqs when the start bit is beyond nr_irqs. So start is always
pointing to the correct area in the bitmap. nr_irqs is just the limit
for irq enumerations, not the real limit for the irq space.
[ tglx: Let irq_expand_nr_irqs() take the new upper end so we do not
expand nr_irqs more than necessary. Made changelog readable ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D6014F9.8040605@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We lazy disable interrupt lines, so only mark the line masked, when
the chip provides an irq_disable callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
No need to lookup the irq descriptor when calling from a chip callback
function which has irq_data already handy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Some chips want irq_eoi() only called when an interrupt is actually
handled. So they have checks for INPROGRESS and DISABLED in their
irq_eoi callbacks. Add a chip flag, which allows to handle that in the
generic code. No impact on the fastpath.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sparc64 needs to call a preflow handler on certain interrupts befor
calling the action chain. Integrate it into handle_fasteoi_irq. Must
be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S. Miller <davem@davemloft.net>
Most of the managing functions get the irq descriptor and lock it -
either with or without buslock. Instead of open coding this over and
over provide a common function to do that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If everything uses the right accessors, then enabling
GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you.
Don't be lazy and use the trick which I use in the core code!
git grep status_use_accessors
will unearth it in a split second. Offenders are tracked down and not
slapped with stinking trouts. This time we use frozen shark for a
better educational value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
