When ext4_read_block_bitmap fails, we can return PTR_ERR(bitmap_bh) to
remove unnecessary NULL check of bitmap_bh.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-18-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We goto exit_meta_group_info only to return -ENOMEM. Return -ENOMEM
directly instead of goto to remove this unnecessary tag.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-16-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If any bex which meets bex->fe_len >= gex->fe_len is found, then it will
always be used when complex scan of group that bex belongs to finishs.
So there will not be any lock-unlock period.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-15-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Only call trace of ext4_mb_check_limits is as following:
ext4_mb_complex_scan_group
ext4_mb_measure_extent
ext4_mb_check_limits(ac, e4b, 0);
ext4_mb_check_limits(ac, e4b, 1);
If the first ac->ac_found > sbi->s_mb_max_to_scan check in
ext4_mb_check_limits is met, we will set ac_status to
AC_STATUS_BREAK and call ext4_mb_try_best_found to try to use
ac->ac_b_ex.
If ext4_mb_try_best_found successes, then block allocation finishs,
the removed ac->ac_found > sbi->s_mb_min_to_scan check is not reachable.
If ext4_mb_try_best_found fails, then we set EXT4_MB_HINT_FIRST and
reset ac->ac_b_ex to retry block allocation. We will use any found
free extent in ext4_mb_measure_extent before reach the removed
ac->ac_found > sbi->s_mb_min_to_scan check.
In summary, the removed ac->ac_found > sbi->s_mb_min_to_scan check is
not reachable and we can remove that dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-14-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always adjust first to even number and adjust last to odd number, so
first == last will never happen. Remove this dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-13-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1. remove unnecessary ac check:
We always go to out tag before ac is successfully allocated, then we can
move out tag after free of ac and remove NULL check of ac.
2. remove unnecessary *errp check:
We always go to errout tag if *errp is non-zero, then we can move errout
tag into error handle if *errp is non-zero.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-12-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
e4b->bd_buddy_page is only set if we initialize ext4_buddy successfully. So
e4b->bd_buddy_page is always NULL in error handle branch. Just remove the
dead check.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-11-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we alloc array of buffer_head failed, there is no resource need to be
freed and we can simpily return error.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-10-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Return value static function ext4_mb_try_best_found and
ext4_mb_free_metadata is not used. Just remove unused return value.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-9-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If ext4_mb_mark_diskspace_used fails in ext4_mb_new_blocks, we may
discard pa already in list. Protect pa with pa_lock to avoid race.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As we don't correct pa_lstart here, so there is no need to subtract
pa_lstart with consumed len.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We will add pa_free to s_mb_preallocated when new ext4_prealloc_space is
created. In ext4_mb_new_inode_pa, we will call ext4_mb_use_inode_pa
before adding pa_free to s_mb_preallocated. However, ext4_mb_use_inode_pa
will consume pa_free for block allocation which triggerred the creation
of ext4_prealloc_space. Add pa_free to s_mb_preallocated before
ext4_mb_use_inode_pa to correct calculation of s_mb_preallocated.
There is no such problem in ext4_mb_new_group_pa as pa_free of group pa
is consumed in ext4_mb_release_context instead of ext4_mb_use_group_pa.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We always get ext4_group_desc with group + 1 and ext4_group_info with
group to check if we need do initialize ext4_group_info for the group.
Just get ext4_group_desc with group for ext4_group_info initialization
check.
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If EXT4_MB_HINT_GOAL_ONLY is set, ext4_mb_regular_allocator will only
allocate blocks from ext4_mb_find_by_goal. Allow to find by goal in
ext4_mb_find_by_goal if EXT4_MB_HINT_GOAL_ONLY is set or allocation
with EXT4_MB_HINT_GOAL_ONLY set will always fail.
EXT4_MB_HINT_GOAL_ONLY is not used at all, so the problem is not
found for now.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We need to set ac_g_ex to notify the goal start used in
ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in
ext4_mb_normalize_request.
Besides we should assure goal start is in range [first_data_block,
blocks_count) as ext4_mb_initialize_context does.
[ Added a check to make sure size is less than ar->pright; otherwise
we could end up passing an underflowed value of ar->pright - size to
ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on.
- TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Remove unused group parameter in ext4_block_bitmap_csum_set. After this,
group parameter in ext4_set_bitmap_checksums is also not used, just
remove it too.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230221203027.2359920-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
As inode table blocks are contiguous, inode table blocks inside the
block_group can be represented as range [itbl_cluster_start,
itbl_cluster_last]. Then we can simply account inode table cluters and
check cluster overlap with [itbl_cluster_start, itbl_cluster_last]
instead of traverse each block of inode table.
By the way, this patch fixes code style problem of comment for
ext4_num_overhead_clusters.
[ Merged fix-up patch which fixed potentially access to an
uninitialzied stack variable. --TYT ]
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-8-shikemeng@huaweicloud.com
Link: https://lore.kernel.org/r/202303171446.eLEhZzAu-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
For case we initialize a bitmap bh, we will set bitmap bh verified.
We can return immediately instead of goto verify to remove unnecessary
work for trying to verify bitmap bh.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-7-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Commit bdfb6ff4a2 ("ext4: mark group corrupt on group descriptor
checksum") added flag to indicate corruption of group instead of
marking all blocks used. Just remove stale comment.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-6-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We only call ext4_bg_num_gdb_nometa if there is no meta_bg feature or group
does not reach first_meta_bg, so group must not reside in meta group. Then
group has a global gdt if superblock exists. Just remove confusing branch
that meta_bg feature exists.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_num_base_meta_clusters is already aware of meta_bg feature and test
if block_group is inside real meta block groups before calling
ext4_bg_num_gdb. Then ext4_bg_num_gdb will check if block group is inside
a real meta block groups again to decide either ext4_bg_num_gdb_meta or
ext4_bg_num_gdb_nometa is needed.
Call ext4_bg_num_gdb_meta or ext4_bg_num_gdb_nometa directly after we
check if block_group is inside a meta block groups in
ext4_num_base_meta_clusters to remove redundant check of meta block
groups in ext4_bg_num_gdb.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
1.Last valid cluster of inode table is EXT4_B2C(sbi, offset +
sbi->s_itb_per_group - 1). We should make sure last valid cluster is <
max_bit, i.e., EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) is <
max_bit rather than EXT4_B2C(sbi, offset + sbi->s_itb_per_group) is
< max_bit.
2.Bit search length should be last valid cluster plus 1, i.e.,
EXT4_B2C(sbi, offset + sbi->s_itb_per_group - 1) + 1 rather than
EXT4_B2C(sbi, offset + sbi->s_itb_per_group).
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We mark buffer_head of bitmap successfully initialized even error occurs
in ext4_init_block_bitmap. Although we will return error, we will get a
invalid buffer_head of bitmap from next ext4_read_block_bitmap_nowait
which is marked buffer_verified but not successfully initialized actually
in previous ext4_read_block_bitmap_nowait.
Fix this by only marking buffer_head successfully initialized if
ext4_init_block_bitmap successes.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230221115919.1918161-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Test generic/390 in data=journal mode often triggers a warning that
ext4_do_writepages() tries to start a transaction on frozen filesystem.
This happens because although all dirty data is properly written, jbd2
checkpointing code writes data through submit_bh() and as a result only
buffer dirty bits are cleared but page dirty bits stay set. Later when
the filesystem is frozen, writeback code comes, tries to write
supposedly dirty pages and the warning triggers. Fix the problem by
calling sync_filesystem() once more after flushing the whole journal to
clear stray page dirty bits.
[ Applied fixup patches to address crashes when running data=journal
tests; see links for more details -- TYT ]
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230308142528.12384-1-jack@suse.cz
Reported-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230319183617.GA896@sol.localdomain
Link: https://lore.kernel.org/r/20230323145404.21381-1-jack@suse.cz
Link: https://lore.kernel.org/r/20230323145404.21381-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Add support for writeback of journalled data directly into
ext4_writepages() instead of offloading it to write_cache_pages(). This
actually significantly simplifies the code and reduces code duplication.
For checkpointing of committed data we can use ext4_writepages()
rightaway the same way as writeback of ordered data uses it on
transaction commit. For journalling of dirty mapped pages, we need to
add a special case to mpage_prepare_extent_to_map() to add all page
buffers to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-8-tytso@mit.edu
In case mpage_submit_page() returns error, it doesn't really matter
whether we call mpage_page_done() and then return error or whether we
return directly because in that case page cleanup will be done by
mpage_release_unused_pages() instead. Logically, it makes more sense to
leave the cleanup to mpage_release_unused_pages() because we didn't
succeed in writing the page. So move mpage_page_done() calls after the
error handling.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-7-tytso@mit.edu
Move page unlocking during page writeback out of mpage_submit_page()
into the callers. This will allow writeback in data=journal mode to keep
the page locked for a bit longer. Since page unlocking it tightly
connected to increment of mpd->first_page (as that determines cleanup of
locked but unwritten pages), move page unlocking as well as
mpd->first_page handling into a helper function.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-6-tytso@mit.edu
Do not unlock the written page in ext4_bio_write_page(). Instead leave
the page locked and unlock it in the callers. We'll need to keep the
page locked for data=journal writeback for a bit longer.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-5-tytso@mit.edu
In data=journal mode, page should be dirtied only when it has buffers
for checkpoint or it is writeably mapped. In the first case, we don't
need to do anything special. In the second case, page was already added
to the journal by ext4_page_mkwrite() and since transaction commit
writeprotects mapped pages again, page should be writeable (and thus
dirtied) only while it is part of the running transaction. So nothing
needs to be done either. The only special case is when someone pins the
page and uses this pin for modifying page data. So recognize this
special case and only then mark the page as having data that needs
adding to the journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-4-tytso@mit.edu
When looking up extent of pages to map in mpage_prepare_extent_to_map()
we count how many pages we still need to find in a copy of
wbc->nr_to_write counter. With more complex page handling for
data=journal mode, it will be easier to use wbc->nr_to_write directly so
that we don't forget to carry over changes back to nr_to_write counter.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-3-tytso@mit.edu
The comment above do_journal_get_write_access() is very stale. Most of
it just does not refer to what the function does today or how jbd2
works. The bit about transaction handling during write(2) is still
correct so just update the function names in that part and move the
comment to a more appropriate place.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230228051319.4085470-2-tytso@mit.edu
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead.
- Fix per cpu thread management of the hwlat tracer
* Do not start per_cpu threads if one is already running for the CPU.
* When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to
the result of the call from kprobe_event_delete(), which would
likely succeed, and thus have the function return success.
- Fix splice() reads from the trace file that was broken by
36e2c7421f ("fs: don't allow splice read/write without explicit ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags
for tricks to optimize, which was shortly removed due to them
being tricks. But a comment for those tricks remained.
- Set local functions and variables to static
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZBdIkBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qti2AP49s1GM8teFgDF/CO3oa45BoYq1lMJO
1Z+x+mS/bdUAZgEAw+3KGo8oZDuvWu/nr04JPeoy0GL1/JnbQ6JNCCjzhQc=
=Yk66
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix setting affinity of hwlat threads in containers
Using sched_set_affinity() has unwanted side effects when being
called within a container. Use set_cpus_allowed_ptr() instead
- Fix per cpu thread management of the hwlat tracer:
- Do not start per_cpu threads if one is already running for the CPU
- When starting per_cpu threads, do not clear the kthread variable
as it may already be set to running per cpu threads
- Fix return value for test_gen_kprobe_cmd()
On error the return value was overwritten by being set to the result
of the call from kprobe_event_delete(), which would likely succeed,
and thus have the function return success
- Fix splice() reads from the trace file that was broken by commit
36e2c7421f ("fs: don't allow splice read/write without explicit
ops")
- Remove obsolete and confusing comment in ring_buffer.c
The original design of the ring buffer used struct page flags for
tricks to optimize, which was shortly removed due to them being
tricks. But a comment for those tricks remained
- Set local functions and variables to static
* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
ring-buffer: remove obsolete comment for free_buffer_page()
tracing: Make splice_read available again
ftrace: Set direct_ops storage-class-specifier to static
trace/hwlat: Do not start per-cpu thread if it is already running
trace/hwlat: Do not wipe the contents of per-cpu thread data
tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
tracing: Fix wrong return in kprobe_event_gen_test.c
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa8e ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829cb3 ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82ca ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.
Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82ca ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBcinQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynIYACgjP49Xy1N6hDLZJgKxvnPLmvnhY4AoKM8CkHI
zbWudA1fBqsYLFtxNKaQ
=/Ond
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
some reported issues.
They include:
- 8250 driver Kconfig issue pointed out by you that showed up in -rc1
- qcom-geni serial driver fixes
- various 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- serdev fix for regression in -rc1
- vt.c bugfix
All have been in linux-next for over a week with no reported problems"
* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
serial: qcom-geni: drop bogus uart_write_wakeup()
serial: qcom-geni: fix mapping of empty DMA buffer
serial: qcom-geni: fix DMA mapping leak on shutdown
serial: qcom-geni: fix console shutdown hang
serdev: Set fwnode for serdev devices
tty: serial: fsl_lpuart: fix race on RX DMA shutdown
serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
serial: 8250_fsl: fix handle_irq locking
serial: 8250_em: Fix UART port type
serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"
Here are a few small char/misc/other driver subsystem patches to resolve
reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems.
- nvmem core fix
- firmware driver fix for reported problem.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZBchKw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYVQCfbQtOMjbfxCNvmBCZbC8GWaanLloAn243V7vJ
oxfPCUa6+BYLFWweKydG
=tuC/
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc/other driver subsystem patches to
resolve reported problems for 6.3-rc3.
Included in here are:
- Interconnect driver fixes for reported problems
- Memory driver fixes for reported problems
- nvmem core fix
- firmware driver fix for reported problem
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
memory: tegra30-emc: fix interconnect registration race
memory: tegra20-emc: fix interconnect registration race
memory: tegra124-emc: fix interconnect registration race
memory: tegra: fix interconnect registration race
interconnect: exynos: drop redundant link destroy
interconnect: exynos: fix registration race
interconnect: exynos: fix node leak in probe PM QoS error path
interconnect: qcom: msm8974: fix registration race
interconnect: qcom: rpmh: fix registration race
interconnect: qcom: rpmh: fix probe child-node error handling
interconnect: qcom: rpm: fix registration race
nvmem: core: return -ENOENT if nvmem cell is not found
firmware: xilinx: don't make a sleepable memory allocation from an atomic context
interconnect: qcom: rpm: fix probe child-node error handling
interconnect: qcom: osm-l3: fix registration race
interconnect: imx: fix registration race
interconnect: fix provider registration API
interconnect: fix icc_provider_del() error handling
interconnect: fix mem leak when freeing nodes
interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
...
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
-----BEGIN PGP SIGNATURE-----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=Q6Dq
-----END PGP SIGNATURE-----
Merge tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fix from Borislav Petkov:
- Flush out logged errors immediately after MCA banks configuration
changes over sysfs have been done instead of waiting until something
else triggers the workqueue later - another error or the polling
interval cycle is reached
* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure logged MCEs are processed after sysfs update
to groups
- Update the proper event time tracking variable depending on the
event type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmQXBiQACgkQEsHwGGHe
VUrTHg//dTd+7Oo1vao32lZCkVW0bBvx3KzoyAcvEPh7Yu3Cw+tZkfI8lWY8dgU3
lgecN1pUa9IiZNULFbulXqRumcq3HIRKCp/RejEmR3W30KCwxnEAwGdakkCPEcMS
2vXl4SZn7rU8avKJBd/ZUUS5lDWz6YHPNbLX3iamFH+7oN56Vf2LFJuuO0WtZSgr
Sqv25oaV1ZZjeEAI5KrPM04hcldj4BXGPoIPvP30/c3z6aPnwt6v5H2gw5IUJNHl
Qm0ycgW7An6iNR4bFpm/NP9cSAI7FgmAB3VuhQAExl6NroUxE8R+HEO04PsJAOgd
BpNB1eXIjrTgw8r+TsDq4Z9VY8fgMtHbwutAp348XwF6//5F/WOzojwSGAAX7LCx
5+fK4eA4gLkQJmuyI5/3fNCC0EnUTsK/YCC5eFyas8KFERTmmq8hafCBQO4W9VPr
8A7TD2X6fWNWvS/UF1RqVv/gCa0ub7ifz+eOx42/vK2PXn4vsjMv0JtwnARj8PzZ
Ymo/3ArmBWhuP+94FdVP4AduBuEdHvWO7EZG5buRdOo//sb2MwX05zufowLvR9YQ
E+VkZxf0RFPaDQdPnoS/SwFE206ii2Z5MtgsQX7XpoBo06R5AzZQlhlMl/StFvN0
65ut1dWwqrVG0uSN0GOzTIZl5x5YZASm5I49ItZsnZyoMPTwDOc=
=l7PF
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Check whether sibling events have been deactivated before adding them
to groups
- Update the proper event time tracking variable depending on the event
type
- Fix a memory overwrite issue due to using the wrong function argument
when outputting perf events
* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix check before add_event_to_groups() in perf_group_detach()
perf: fix perf_event_context->time
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from potentially
malicious SEV guests issuing requests in rapid succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received
a cleanup, split in more or less trivial, small and digestible pieces.
Otherwise, the code was threatening to become an unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so that
there's no differences between the upstream code and the stable
variant when it comes down to backporting more there.
-----BEGIN PGP SIGNATURE-----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=6UGz
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"There's a little bit more 'movement' in there for my taste but it
needs to happen and should make the code better after it.
- Check cmdline_find_option()'s return value before further
processing
- Clear temporary storage in the resctrl code to prevent access to an
unexistent MSR
- Add a simple throttling mechanism to protect the hypervisor from
potentially malicious SEV guests issuing requests in rapid
succession.
In order to not jeopardize the sanity of everyone involved in
maintaining this code, the request issuing side has received a
cleanup, split in more or less trivial, small and digestible
pieces. Otherwise, the code was threatening to become an
unmaintainable mess.
Therefore, that cleanup is marked indirectly also for stable so
that there's no differences between the upstream code and the
stable variant when it comes down to backporting more there"
* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use of uninitialized buffer in sme_enable()
x86/resctrl: Clear staged_config[] before and after it is used
virt/coco/sev-guest: Add throttling awareness
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
virt/coco/sev-guest: Do some code style cleanups
virt/coco/sev-guest: Carve out the request issuing logic into a helper
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
virt/coco/sev-guest: Simplify extended guest request handling
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
syzkaller.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmQWfYcACgkQ8vlZVpUN
gaNvhAgAqIv3PLgt3SJIC/klXmEsXJn2q1EqAUKk6XHAzppHoUMrnsJJ2Sz+u4NT
eKx7FGz+dIzJK8lLoX+XNnLgdkkJwklD8jIxAjbnkgHaGJbjdLH3Su4elQvGwLla
CprPysjMtgny4rogLwz2D+At3w8o7/JACbzlh0QNhaZ5IIP4Kj5QutgyftF1m4Qa
AfC9KcpJ+poTQTI4m4oOrJCrH6kwJdVItuS5/mk54DTChNNYtJJy2M6eho7IQ9iG
ENBnt06/uWhdHQz4OYmYn3x1iXYOAdAmeVGtREKqOstUd31VO2TCC2lE+7tSnO2d
177m3jfTHdv5znU+LfyrS1Y1u1nGBA==
=AXq7
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"Fix a double unlock bug on an error path in ext4, found by smatch and
syzkaller"
* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix possible double unlock when moving a directory
smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
symbol 'direct_ops' was not declared. Should it be static?
The variable direct_ops is only used in ftrace.c, so it should be static
Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:
#!/bin/sh
cd /sys/kernel/debug/tracing
echo 0 > tracing_on
echo hwlat > current_tracer
echo per-cpu > hwlat_detector/mode
echo 100000 > hwlat_detector/width
echo 200000 > hwlat_detector/window
echo 1 > tracing_on
To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.
Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: f46b16520a ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
