Impact: clean up
The trace_seq functions may be used separately outside of the ftrace
iterator. The trace_seq_reset is needed for these operations.
This patch also renames trace_seq_reset to the more appropriate
trace_seq_init.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
The trace event objects are currently not proctected against
reentrancy. This patch adds a mutex around the modifications of
the trace event fields.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Tom Zanussi pointed out that the simple TRACE_FIELD was not enough to
record trace data that required memcpy. This patch addresses this issue
by adding a TRACE_FIELD_SPECIAL. The format is similar to TRACE_FIELD
but looks like so:
TRACE_FIELD_SPECIAL(type_item, item, cmd)
What TRACE_FIELD gave was:
TRACE_FIELD(type, item, assign)
The TRACE_FIELD would be used in declaring a structure:
struct {
type item;
};
And later assign it via:
entry->item = assign;
What TRACE_FIELD_SPECIAL gives us is:
In the declaration of the structure:
struct {
type_item;
};
And the assignment:
cmd;
This change log will explain the one example used in the patch:
TRACE_EVENT_FORMAT(sched_switch,
TPPROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TPARGS(rq, prev, next),
TPFMT("task %s:%d ==> %s:%d",
prev->comm, prev->pid, next->comm, next->pid),
TRACE_STRUCT(
TRACE_FIELD(pid_t, prev_pid, prev->pid)
TRACE_FIELD(int, prev_prio, prev->prio)
TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
next_comm,
TPCMD(memcpy(TRACE_ENTRY->next_comm,
next->comm,
TASK_COMM_LEN)))
TRACE_FIELD(pid_t, next_pid, next->pid)
TRACE_FIELD(int, next_prio, next->prio)
),
TPRAWFMT("prev %d:%d ==> next %s:%d:%d")
);
The struct will be create as:
struct {
pid_t prev_pid;
int prev_prio;
char next_comm[TASK_COMM_LEN];
pid_t next_pid;
int next_prio;
};
Note the TRACE_ENTRY in the cmd part of TRACE_SPECIAL. TRACE_ENTRY will
be set by the tracer to point to the structure inside the trace buffer.
entry->prev_pid = prev->pid;
entry->prev_prio = prev->prio;
memcpy(entry->next_comm, next->comm, TASK_COMM_LEN);
entry->next_pid = next->pid;
entry->next_prio = next->prio
Reported-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:
enable : values 0 or 1 to enable or disable the trace event.
available_types: values 'raw' and 'printf' which indicate the tracing
types available for the trace point. If a developer does not
use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
macro, then only 'printf' will be available. This file is
read only.
type: values 'raw' or 'printf'. This indicates which type of tracing
is active for that trace point. 'printf' is the default and
if 'raw' is not available, this file is read only.
# echo raw > /debug/tracing/events/sched/sched_wakeup/type
# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
Will enable the C style tracing for the sched_wakeup trace point.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: lower overhead tracing
The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.
Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.
I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.
This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.
The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)
They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.
So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.
Here's what usage looks like:
TRACE_EVENT_FORMAT(name,
TPPROTO(proto),
TPARGS(args),
TPFMT(fmt, fmt_args),
TRACE_STUCT(
TRACE_FIELD(type1, item1, assign1)
TRACE_FIELD(type2, item2, assign2)
[...]
),
TPRAWFMT(raw_fmt)
);
Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.
name: is the unique identifier of the trace point
proto: The proto type that the trace point uses
args: the args in the proto type
fmt: printf format to use with the event printf tracer
fmt_args: the printf argments to match fmt
TRACE_STRUCT starts the ability to create a structure.
Each item in the structure is defined with a TRACE_FIELD
TRACE_FIELD(type, item, assign)
type: the C type of item.
item: the name of the item in the stucture
assign: what to assign the item in the trace point callback
raw_fmt is a way to pretty print the struct. It must match
the order of the items are added in TRACE_STUCT
An example of this would be:
TRACE_EVENT_FORMAT(sched_wakeup,
TPPROTO(struct rq *rq, struct task_struct *p, int success),
TPARGS(rq, p, success),
TPFMT("task %s:%d %s",
p->comm, p->pid, success?"succeeded":"failed"),
TRACE_STRUCT(
TRACE_FIELD(pid_t, pid, p->pid)
TRACE_FIELD(int, success, success)
),
TPRAWFMT("task %d success=%d")
);
This creates us a unique struct of:
struct {
pid_t pid;
int success;
};
And the way the call back would assign these values would be:
entry->pid = p->pid;
entry->success = success;
The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer. Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.
The developer would only need to touch the files in include/trace/*.h
Again, I would like to give special thanks to Tom Zanussi for this
nice idea.
Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.
But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch makes the event files, set_event and available_events
aware of the subsystem.
Now you can enable an entire subsystem with:
echo 'irq:*' > set_event
Note: the '*' is not needed.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If a trace point header defines TRACE_SYSTEM, then it will add the
following trace points into that event system.
If include/trace/irq_event_types.h has:
#define TRACE_SYSTEM irq
at the top and
#undef TRACE_SYSTEM
at the bottom, then a directory "irq" will be created in the
/debug/tracing/events directory. Inside that directory will contain the
two trace points that are defined in include/trace/irq_event_types.h.
Only adding the above to irq and not to sched, we get:
# ls /debug/tracing/events/
irq sched_process_exit sched_signal_send sched_wakeup_new
sched_kthread_stop sched_process_fork sched_switch
sched_kthread_stop_ret sched_process_free sched_wait_task
sched_migrate_task sched_process_wait sched_wakeup
# ls /debug/tracing/events/irq
irq_handler_entry irq_handler_exit
If we add #define TRACE_SYSTEM sched to the trace/sched_event_types.h
then the rest of the trace events will be put in a sched directory
within the events directory.
I've been playing with this idea of the subsystem for a while, but
recently Tom Zanussi posted some patches to lkml that included this
method. Tom's approach was clean and got me to finally put some effort
to clean up the event trace points.
Thanks to Tom Zanussi for demonstrating how nice the subsystem
method is.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
To further facilitate the ease of adding trace points for developers, this
patch creates include/trace/trace_events.h and
include/trace/trace_event_types.h.
The former file will hold the trace/<type>.h files and the latter will hold
the trace/<type>_event_types.h files.
To create new tracepoints and to have them automatically
appear in the event tracer, a developer makes the trace/<type>.h file
which includes <linux/tracepoint.h> and the trace/<type>_event_types.h file.
The trace/<type>_event_types.h file will hold the TRACE_FORMAT
macros.
Then add the trace/<type>.h file to trace/trace_events.h,
and add the trace/<type>_event_types.h to the trace_event_types.h file.
No need to modify files elsewhere.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: clean up
kcalloc is a better approach to allocate a NULL array.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix compile warning and clean up
When I first wrote __tracing_open, instead of passing the error
code via the ERR_PTR macros, I lazily used a separate parameter
to hold the return for errors.
When Frederic Weisbecker updated that function, he used the Linux
kernel ERR_PTR for the returns. This caused the parameter return
to possibly not be initialized on error. gcc correctly pointed this
out with a warning.
This patch converts the entire function to use the Linux kernel
ERR_PTR macro methods.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Impact: fix to possible race conditions
There's some uses of current_tracer that is not protected by the
trace_types_lock. There is a small chance that a sysadmin changes
the tracer while the current_tracer is being referenced.
If the race is hit, it is unlikely to cause any harm since the
tracers are constant and are not freed. But some strang side
effects may occur.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch adds the tracer dependent options dynamically to the
options directory when the tracer is activated. These options are
removed when the tracer is deactivated.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates an options directory in the debugfs, that contains
the available tracing options. These files contain 1 or 0, where 1
is the option is enabled and 0 it is disabled.
Simply echoing in 1 will enable the option and 0 will disable it.
This patch only contains the core options, not the tracer options.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
If the TSC is constant and non-stop, also set it reliable.
(We will turn this off in DMI quirks for multi-chassis systems)
The performance number on a 16-way Nehalem system running
32 tasks that context-switch between each other is significant:
sched_clock_stable=0 sched_clock_stable=1
.................... ....................
22.456925 million/sec 24.306972 million/sec [+8.2%]
lmbench's "lat_ctx -s 0 2" goes from 0.63 microseconds to
0.59 microseconds - a 6.7% increase in context-switching
performance.
Perfstat of 1 million pipe context switches between two tasks:
Performance counter stats for './pipe-test-1m':
[before] [after]
............ ............
37621.421089 36436.848378 task clock ticks (msecs)
0 0 CPU migrations (events)
2000274 2000189 context switches (events)
194 193 pagefaults (events)
8433799643 8171016416 CPU cycles (events) -3.21%
8370133368 8180999694 instructions (events) -2.31%
4158565 3895941 cache references (events) -6.74%
44312 46264 cache misses (events)
2349.287976 2279.362465 wall-time (msecs) -3.06%
The speedup comes straight from the reduction in the instruction
count. sched_clock_cpu() got simpler and the whole workload thus
executes faster.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Allow CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures to still specify
that their sched_clock() implementation is reliable.
This will be used by x86 to switch on a faster sched_clock_cpu()
implementation on certain CPU types.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: implement new tracing timestamp APIs
Add three trace clock variants, with differing scalability/precision
tradeoffs:
- local: CPU-local trace clock
- medium: scalable global clock with some jitter
- global: globally monotonic, serialized clock
Make the ring-buffer use the local trace clock internally.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
make sure we dont execute more complex sched_clock() code in NMI context.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: add new tracepoints
Add them to the generic IRQ code, that way every architecture
gets these new tracepoints, not just x86.
Using Steve's new 'TRACE_FORMAT', I can get function graph
trace as follows using the original two IRQ tracepoints:
3) | handle_IRQ_event() {
3) | /* (irq_handler_entry) irq=28 handler=eth0 */
3) | e1000_intr_msi() {
3) 2.460 us | __napi_schedule();
3) 9.416 us | }
3) | /* (irq_handler_exit) irq=28 handler=eth0 return=handled */
3) + 22.935 us | }
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: restructure the VFS layout of per CPU trace buffers
The per cpu trace files are all in a single directory:
/debug/tracing/per_cpu. In case of a large number of cpu, the
content of this directory becomes messy so we create now one
directory per cpu inside /debug/tracing/per_cpu which contain
each their own trace_pipe and trace files.
Ie:
/debug/tracing$ ls -R per_cpu
per_cpu:
cpu0 cpu1
per_cpu/cpu0:
trace trace_pipe
per_cpu/cpu1:
trace trace_pipe
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra warned that TPPROTO and TPARGS might become something
other than a simple copy of itself. To prevent this from having
side effects in the TRACE_FORMAT macro in tracepoint.h, we add a
PARAMS() macro to be defined as just a wrapper.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should
be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it
TRACE_FORMAT.
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.
Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.
Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.
The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.
The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.
Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: split up tracing output per cpu
Currently, on the tracing debugfs directory, three files are
available to the user to let him extracting the trace output:
- trace is an iterator through the ring-buffer. It's a reader
but not a consumer It doesn't block when no more traces are
available.
- trace pretty similar to the former, except that it adds more
informations such as prempt count, irq flag, ...
- trace_pipe is a reader and a consumer, it will also block
waiting for traces if necessary (heh, yes it's a pipe).
The traces coming from different cpus are curretly mixed up
inside these files. Sometimes it messes up the informations,
sometimes it's useful, depending on what does the tracer
capture.
The tracing_cpumask file is useful to filter the output and
select only the traces captured a custom defined set of cpus.
But still it is not enough powerful to extract at the same time
one trace buffer per cpu.
So this patch creates a new directory: /debug/tracing/per_cpu/.
Inside this directory, you will now find one trace_pipe file and
one trace file per cpu.
Which means if you have two cpus, you will have:
trace0
trace1
trace_pipe0
trace_pipe1
And of course, reading these files will have the same effect
than with the usual tracing files, except that you will only see
the traces from the given cpu.
The original all-in-one cpu trace file are still available on
their original place.
Until now, only one consumer was allowed on trace_pipe to avoid
racy consuming on the ring-buffer. Now the approach changed a
bit, you can have only one consumer per cpu.
Which means you are allowed to read concurrently trace_pipe0 and
trace_pipe1 But you can't have two readers on trace_pipe0 or
trace_pipe1.
Following the same logic, if there is one reader on the common
trace_pipe, you can not have at the same time another reader on
trace_pipe0 or in trace_pipe1. Because in trace_pipe is already
a consumer in all cpu buffers in essence.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: remove old debug/tracing API
/debug/tracing/latency_trace is an old legacy format we kept from
the old latency tracer. Remove the file for now. If there's any
useful bit missing then we'll propagate any useful output bits into
the /debug/tracing/trace output.
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Impact: fix CPU hotplug lockup
bts_hotcpu_handler() is called with irqs disabled, so using mutex_lock()
is a no-no.
All the BTS codepaths here are atomic (they do not schedule), so using
a spinlock is the right solution.
Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch adds the directory /debug/tracing/events/ that will contain
all the registered trace points.
# ls /debug/tracing/events/
sched_kthread_stop sched_process_fork sched_switch
sched_kthread_stop_ret sched_process_free sched_wait_task
sched_migrate_task sched_process_wait sched_wakeup
sched_process_exit sched_signal_send sched_wakeup_new
# ls /debug/tracing/events/sched_switch/
enable
# cat /debug/tracing/events/sched_switch/enable
1
# cat /debug/tracing/set_event
sched_switch
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT
such that they are automatically registered with the event tracer.
And it also adds the tracing sched headers to kernel/trace/events.c
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates the event tracing infrastructure of ftrace.
It will create the files:
/debug/tracing/available_events
/debug/tracing/set_event
The available_events will list the trace points that have been
registered with the event tracer.
set_events will allow the user to enable or disable an event hook.
example:
# echo sched_wakeup > /debug/tracing/set_event
Will enable the sched_wakeup event (if it is registered).
# echo "!sched_wakeup" >> /debug/tracing/set_event
Will disable the sched_wakeup event (and only that event).
# echo > /debug/tracing/set_event
Will disable all events (notice the '>')
# cat /debug/tracing/available_events > /debug/tracing/set_event
Will enable all registered event hooks.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
This patch creates a DEFINE_TRACE_FMT to map to DECLARE_TRACE.
This allows for the developers to place format strings and
args in with their tracepoint declaration. A tracer may now
override the DEFINE_TRACE_FMT macro and use it to record
a default format.
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
Add i2c_board_info for RiscPC PCF8583
i2c: Make sure i2c_algo_bit_data.timeout is HZ-independent
i2c-dev: Clarify the unit of ioctl I2C_TIMEOUT
i2c: Timeouts reach -1
i2c: Fix misplaced parentheses
* 'firedtv-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firedtv: dvb_frontend_info for FireDTV S2, fix "frequency limits undefined" error
firedtv: massive refactoring
firedtv: rename files, variables, functions from firesat to firedtv
firedtv: Use DEFINE_SPINLOCK
firedtv: fix registration - adapter number could only be zero
firedtv: use length_field() of PMT as length
firedtv: fix returned struct for ca_info
firedtv: cleanups and minor fixes
ieee1394: remove superfluous assertions
ieee1394: inherit ud vendor_id from node vendor_id
ieee1394: add hpsb_node_read() and hpsb_node_lock()
ieee1394: use correct barrier types between accesses of nodeid and generation
firesat: copyrights, rename to firedtv, API conversions, fix remote control input
firesat: avc resend
firesat: update isochronous interface, add CI support
firesat: add DVB-S support for DVB-S2 devices
firesat: fix DVB-S2 device recognition
DVB: add firesat driver
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
ext4: Add fallback for find_group_flex
Add the necessary i2c_board_info structure to fix the lack of PCF8583
RTC on RiscPC.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
i2c_algo_bit_data.timeout is supposed to be in jiffies, so drivers
should use set this value in terms of HZ.
Ultimately I think this field should be discarded in favor of
i2c_adapter.timeout, but that's left for a future patch.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Acked-by: Len Sorensen <lsorense@csclub.uwaterloo.ca>
The unit in which user-space can set the bus timeout value is jiffies
for historical reasons (back when HZ was always 100.) This is however
not good because user-space doesn't know how long a jiffy lasts. The
timeout value should instead be set in a fixed time unit. Given the
original value of HZ, this unit should be 10 ms, for compatibility.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
With a postfix decrement these timeouts reach -1 rather than 0, but
after the loop it is tested whether they have become 0.
As pointed out by Jean Delvare, the condition we are waiting for should
also be tested before the timeout. With the current order, you could
exit with a timeout error while the job is actually done.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
