The lazy gc on insert that should remove timed-out entries fails to release
the other half of the interval, if any.
Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0
in nftables.git and kmemleak enabled kernel.
Second bug is the use of rbe_prev vs. prev pointer.
If rbe_prev() returns NULL after at least one iteration, rbe_prev points
to element that is not an end interval, hence it should not be removed.
Lastly, check the genmask of the end interval if this is active in the
current generation.
Fixes: c9e6978e27 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
The qca8k switch doesn't support using 0 as VID and require a default
VID to be always set. MDB add/del function doesn't currently handle
this and are currently setting the default VID.
Fix this by correctly handling this corner case and internally use the
default VID for VID 0 case.
Fixes: ba8f870dfa ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
On deleting an MDB entry for a port, fdb_search_and_del is used.
An FDB entry can't be modified so it needs to be deleted and readded
again with the new portmap (and the port deleted as requested)
We use the SEARCH operator to search the entry to edit by vid and mac
address and then we check the aging if we actually found an entry.
Currently the code suffer from a bug where the searched fdb entry is
never read again with the found values (if found) resulting in the code
always returning -EINVAL as aging was always 0.
Fix this by correctly read the fdb entry after it was searched.
Fixes: ba8f870dfa ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
On inserting a mdb entry, fdb_search_and_insert is used to add a port to
the qca8k target entry in the FDB db.
A FDB entry can't be modified so it needs to be removed and insert again
with the new values.
To detect if an entry already exist, the SEARCH operation is used and we
check the aging of the entry. If the entry is not 0, the entry exist and
we proceed to delete it.
Current code have 2 main problem:
- The condition to check if the FDB entry exist is wrong and should be
the opposite.
- When a FDB entry doesn't exist, aging was never actually set to the
STATIC value resulting in allocating an invalid entry.
Fix both problem by adding aging support to the function, calling the
function with STATIC as aging by default and finally by correct the
condition to check if the entry actually exist.
Fixes: ba8f870dfa ("net: dsa: qca8k: add support for mdb_add/del")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The qca8xxx switch supports 2 way to write reg values, a slow way using
mdio and a fast way by sending specially crafted mgmt packet to
read/write reg.
The fast way can support up to 32 bytes of data as eth packet are used
to send/receive.
This correctly works for almost the entire regmap of the switch but with
the use of some kernel selftests for dsa drivers it was found a funny
and interesting hw defect/limitation.
For some specific reg, bulk write won't work and will result in writing
only part of the requested regs resulting in half data written. This was
especially hard to track and discover due to the total strangeness of
the problem and also by the specific regs where this occurs.
This occurs in the specific regs of the ATU table, where multiple entry
needs to be written to compose the entire entry.
It was discovered that with a bulk write of 12 bytes on
QCA8K_REG_ATU_DATA0 only QCA8K_REG_ATU_DATA0 and QCA8K_REG_ATU_DATA2
were written, but QCA8K_REG_ATU_DATA1 was always zero.
Tcpdump was used to make sure the specially crafted packet was correct
and this was confirmed.
The problem was hard to track as the lack of QCA8K_REG_ATU_DATA1
resulted in an entry somehow possible as the first bytes of the mac
address are set in QCA8K_REG_ATU_DATA0 and the entry type is set in
QCA8K_REG_ATU_DATA2.
Funlly enough writing QCA8K_REG_ATU_DATA1 results in the same problem
with QCA8K_REG_ATU_DATA2 empty and QCA8K_REG_ATU_DATA1 and
QCA8K_REG_ATU_FUNC correctly written.
A speculation on the problem might be that there are some kind of
indirection internally when accessing these regs and they can't be
accessed all together, due to the fact that it's really a table mapped
somewhere in the switch SRAM.
Even more funny is the fact that every other reg was tested with all
kind of combination and they are not affected by this problem. Read
operation was also tested and always worked so it's not affected by this
problem.
The problem is not present if we limit writing a single reg at times.
To handle this hardware defect, enable use_single_write so that bulk
api can correctly split the write in multiple different operation
effectively reverting to a non-bulk write.
Cc: Mark Brown <broonie@kernel.org>
Fixes: c766e077d9 ("net: dsa: qca8k: convert to regmap read/write API")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Last year, the code that manages GSI channel transactions switched
from using spinlock-protected linked lists to using indexes into the
ring buffer used for a channel. Recently, Google reported seeing
transaction reference count underflows occasionally during shutdown.
Doug Anderson found a way to reproduce the issue reliably, and
bisected the issue to the commit that eliminated the linked lists
and the lock. The root cause was ultimately determined to be
related to unused transactions being committed as part of the modem
shutdown cleanup activity. Unused transactions are not normally
expected (except in error cases).
The modem uses some ranges of IPA-resident memory, and whenever it
shuts down we zero those ranges. In ipa_filter_reset_table() a
transaction is allocated to zero modem filter table entries. If
hashing is not supported, hashed table memory should not be zeroed.
But currently nothing prevents that, and the result is an unused
transaction. Something similar occurs when we zero routing table
entries for the modem.
By preventing any attempt to clear hashed tables when hashing is not
supported, the reference count underflow is avoided in this case.
Note that there likely remains an issue with properly freeing unused
transactions (if they occur due to errors). This patch addresses
only the underflows that Google originally reported.
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: d338ae28d8 ("net: ipa: kill all other transaction lists")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230724224055.1688854-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller found a bug in unix_bind_bsd() [0]. We can reproduce it
by bind()ing a socket on a path with length 108.
108 is the size of sun_addr of struct sockaddr_un and is the maximum
valid length for the pathname socket. When calling bind(), we use
struct sockaddr_storage as the actual buffer size, so terminating
sun_addr[108] with null is legitimate as done in unix_mkname_bsd().
However, strlen(sunaddr) for such a case causes fortify_panic() if
CONFIG_FORTIFY_SOURCE=y. __fortify_strlen() has no idea about the
actual buffer size and see the string as unterminated.
Let's use strnlen() to allow sun_addr to be unterminated at 107.
[0]:
detected buffer overflow in __fortify_strlen
kernel BUG at lib/string_helpers.c:1031!
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 255 Comm: syz-executor296 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #4
Hardware name: linux,dummy-virt (DT)
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
lr : fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
sp : ffff800089817af0
x29: ffff800089817af0 x28: ffff800089817b40 x27: 1ffff00011302f68
x26: 000000000000006e x25: 0000000000000012 x24: ffff800087e60140
x23: dfff800000000000 x22: ffff800089817c20 x21: ffff800089817c8e
x20: 000000000000006c x19: ffff00000c323900 x18: ffff800086ab1630
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
x14: 1ffff00011302eb8 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 64a26b65474d2a00
x8 : 64a26b65474d2a00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff800089817438 x4 : ffff800086ac99e0 x3 : ffff800080f19e8c
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000002c
Call trace:
fortify_panic+0x1c/0x20 lib/string_helpers.c:1030
_Z16__fortify_strlenPKcU25pass_dynamic_object_size1 include/linux/fortify-string.h:217 [inline]
unix_bind_bsd net/unix/af_unix.c:1212 [inline]
unix_bind+0xba8/0xc58 net/unix/af_unix.c:1326
__sys_bind+0x1ac/0x248 net/socket.c:1792
__do_sys_bind net/socket.c:1803 [inline]
__se_sys_bind net/socket.c:1801 [inline]
__arm64_sys_bind+0x7c/0x94 net/socket.c:1801
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x134/0x240 arch/arm64/kernel/syscall.c:139
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:188
el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa0003e1 d0000e80 91030000 97ffc91a (d4210000)
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230724213425.22920-2-kuniyu@amazon.com
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous commit 954d1fa1ac ("macvlan: Add netlink attribute for
broadcast cutoff") added one additional attribute named
IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff.
However, it forgot to describe the nla_policy at macvlan_policy
(drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer
can be faked as empty (0 bytes) by a malicious user, which could leads
to OOB in heap just like CVE-2023-3773.
To fix it, this commit just completes the nla_policy description for
IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the
potential OOB read.
Fixes: 954d1fa1ac ("macvlan: Add netlink attribute for broadcast cutoff")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230723080205.3715164-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit a3a57bf07d ("net: stmmac: work
around sporadic tx issue on link-up") worked around a problem with TX
sometimes not working after a link-up by avoiding a redundant write to
MAC_CTRL_REG (aka GMAC_CONFIG), since the IP appeared to have problems
with handling multiple writes to that register in some cases.
That commit however only added the work around to dwmac_lib.c (apart
from the common code in stmmac_main.c), but my systems with version
4.21a of the IP exhibit the same problem, so add the work around to
dwmac4_lib.c too.
Fixes: a3a57bf07d ("net: stmmac: work around sporadic tx issue on link-up")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721-stmmac-tx-workaround-v1-1-9411cbd5ee07@axis.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of today, hash extraction support is enabled for all the silicons.
Because of which we are facing initialization issues when the silicon
does not support hash extraction. During creation of the hardware
parsing table for IPv6 address, we need to consider if hash extraction
is enabled then extract only 32 bit, otherwise 128 bit needs to be
extracted. This patch fixes the issue and configures the hardware parser
based on the availability of the feature.
Fixes: a95ab93550 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230721061222.2632521-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
Fix up dev flags when add P2P down link
When adding p2p interfaces to bond/team. The POINTOPOINT, NOARP flags are
not inherit to up devices. Which will trigger IPv6 DAD. Since there is
no ethernet MAC address for P2P devices. This will cause unexpected DAD
failures.
====================
Link: https://lore.kernel.org/r/20230721040356.3591174-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When adding a point to point downlink to team device, we neglected to reset
the team's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to team device. Fix this by
remove multicast/broadcast flags and add p2p and noarp flags.
After removing the none ethernet interface and adding an ethernet interface
to team, we need to reset team interface flags. Unlike bonding interface,
team do not need restore IFF_MASTER, IFF_SLAVE flags.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 1d76efe157 ("team: add support for non-ethernet devices")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When adding a point to point downlink to the bond, we neglected to reset
the bond's flags, which were still using flags like BROADCAST and
MULTICAST. Consequently, this would initiate ARP/DAD for P2P downlink
interfaces, such as when adding a GRE device to the bonding.
To address this issue, let's reset the bond's flags for P2P interfaces.
Before fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond0 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr 167f:18:f188::
8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 brd 2006:70:10::2
inet6 fe80::200:ff:fe00:0/64 scope link
valid_lft forever preferred_lft forever
After fix:
7: gre0@NONE: <POINTOPOINT,NOARP,SLAVE,UP,LOWER_UP> mtu 1500 qdisc noqueue master bond2 state UNKNOWN group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2 permaddr c29e:557a:e9d9::
8: bond0: <POINTOPOINT,NOARP,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/gre6 2006:70:10::1 peer 2006:70:10::2
inet6 fe80::1/64 scope link
valid_lft forever preferred_lft forever
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2221438
Fixes: 872254dd6b ("net/bonding: Enable bonding to enslave non ARPHRD_ETHER")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-07-21 (i40e, iavf)
This series contains updates to i40e and iavf drivers.
Wang Ming corrects an error check on i40e.
Jake unlocks crit_lock on allocation failure to prevent deadlock and
stops re-enabling of interrupts when it's not intended for iavf.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: check for removal state before IAVF_FLAG_PF_COMMS_FAILED
iavf: fix potential deadlock on allocation failure
i40e: Fix an NULL vs IS_ERR() bug for debugfs_create_dir()
====================
Link: https://lore.kernel.org/r/20230721155812.1292752-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmS+jLwTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6LMiB/wPcSaPk8b/Tkpwnf0R0yP36tP7YS0V
7SZldc2KRYeQb0Lk1gPTzWRGmddKl2kORh3Y3JkfanKNsiNfhYgUrxeLDkbeDolo
n1Io6fjhK1DzM5cx6Sn+spPpl4QGWV3YQ8PAJm6FjsH5+M5LPzZIK0GGakESCxU7
YDbq3wqglKeI2h1Ae3sQeBd7k26KQXupHfoCyYgUlmOF/u2PuKP0xmn2674QdlvR
m99iE5kqF/HKlrg1OlcOTa7KzknOYPjsVpJ1nTcqxKmUDEYq+niLflBV9Gw8VEyO
Y1naqUJz3TavDVgVIGkjUJEd/+sw3yI2LK7g3+DhugXvMLrqIPa6kmrM
=ayq3
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-07-24
The first patch is by me and adds a missing set of CAN state to
CAN_STATE_STOPPED on close in the gs_usb driver.
The last patch is by Eric Dumazet and fixes a lockdep issue in the CAN
raw protocol.
* tag 'linux-can-fixes-for-6.5-20230724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix lockdep issue in raw_release()
can: gs_usb: gs_can_close(): add missing set of CAN state to CAN_STATE_STOPPED
====================
Link: https://lore.kernel.org/r/20230724150141.766047-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix ethtool FDIR logic to not use memory after its release.
In the ice_ethtool_fdir.c file there are 2 spots where code can
refer to pointers which may be missing.
In the ice_cfg_fdir_xtrct_seq() function seg may be freed but
even then may be still used by memcpy(&tun_seg[1], seg, sizeof(*seg)).
In the ice_add_fdir_ethtool() function struct ice_fdir_fltr *input
may first fail to be added via ice_fdir_update_list_entry() but then
may be deleted by ice_fdir_update_list_entry.
Terminate in both cases when the returned value of the previous
operation is other than 0, free memory and don't use it anymore.
Reported-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2208423
Fixes: cac2a27cd9 ("ice: Support IPv4 Flow Director filters")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230721155854.1292805-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For both IPv4 and IPv6 incoming TCP connections are tracked in a hash
table with a hash over the source & destination addresses and ports.
However, the IPv6 hash is insufficient and can lead to a high rate of
collisions.
The IPv6 hash used an XOR to fit everything into the 96 bits for the
fast jenkins hash, meaning it is possible for an external entity to
ensure the hash collides, thus falling back to a linear search in the
bucket, which is slow.
We take the approach of hash the full length of IPv6 address in
__ipv6_addr_jhash() so that all users can benefit from a more secure
version.
While this may look like it adds overhead, the reality of modern CPUs
means that this is unmeasurable in real world scenarios.
In simulating with llvm-mca, the increase in cycles for the hashing
code was ~16 cycles on Skylake (from a base of ~155), and an extra ~9
on Nehalem (base of ~173).
In commit dd6d2910c5 ("netfilter: conntrack: switch to siphash")
netfilter switched from a jenkins hash to a siphash, but even the faster
hsiphash is a more significant overhead (~20-30%) in some preliminary
testing. So, in this patch, we keep to the more conservative approach to
ensure we don't add much overhead per SYN.
In testing, this results in a consistently even spread across the
connection buckets. In both testing and real-world scenarios, we have
not found any measurable performance impact.
Fixes: 08dcdbf6a7 ("ipv6: use a stronger hash for tcp")
Signed-off-by: Stewart Smith <trawets@amazon.com>
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230721222410.17914-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the implementation of XDP of FEC driver, the XDP path
shares the transmit queues with the kernel network stack, so it is
possible to lead to a tx timeout event when XDP uses the tx queue
pretty much exclusively. And this event will cause the reset of the
FEC hardware.
To avoid timeout in this case, we use the txq_trans_cond_update()
interface to update txq->trans_start to jiffies so that watchdog
won't generate a transmit timeout warning.
Fixes: 6d6b39f180 ("net: fec: add initial XDP support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://lore.kernel.org/r/20230721083559.2857312-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently on 6.4 net/main:
# ip link add dummy1 type dummy
# echo 1 > /proc/sys/net/ipv6/conf/dummy1/use_tempaddr
# ip link set dummy1 up
# ip -6 addr add 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::44f3:581c:8ca:3983/64 scope global temporary dynamic
valid_lft 604800sec preferred_lft 86172sec
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::44f3:581c:8ca:3983/64 dev dummy1
(can wait a few seconds if you want to, the above delete isn't [directly] the problem)
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::1/64 scope global mngtmpaddr
valid_lft forever preferred_lft forever
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
# ip -6 addr del 2000::1/64 mngtmpaddr dev dummy1
# ip -6 addr show dev dummy1
11: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
inet6 2000::81c9:56b7:f51a:b98f/64 scope global temporary dynamic
valid_lft 604797sec preferred_lft 86169sec
inet6 fe80::e8a8:a6ff:fed5:56d4/64 scope link
valid_lft forever preferred_lft forever
This patch prevents this new 'global temporary dynamic' address from being
created by the deletion of the related (same subnet prefix) 'mngtmpaddr'
(which is triggered by there already being no temporary addresses).
Cc: Jiri Pirko <jiri@resnulli.us>
Fixes: 53bd674915 ("ipv6 addrconf: introduce IFA_F_MANAGETEMPADDR to tell kernel to manage temporary addresses")
Reported-by: Xiao Ma <xiaom@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230720160022.1887942-1-maze@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1e_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: a6a5325239 ("atl1e: Atheros L1E Gigabit Ethernet driver")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230720144219.39285-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
in atl1_tso(), it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Fixes: 401c0aabec ("atl1: simplify tx packet descriptor")
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20230722142511.12448-1-ruc_gongyuanjun@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiri Benc says:
====================
vxlan: fix GRO with VXLAN-GPE
The first patch generalizes code for the second patch, which is a fix for
broken VXLAN-GPE GRO. Thanks to Paolo for noticing the bug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In VXLAN-GPE, there may not be an Ethernet header following the VXLAN
header. But in GRO, the vxlan driver calls eth_gro_receive
unconditionally, which means the following header is incorrectly parsed
as Ethernet.
Introduce GPE specific GRO handling.
For better performance, do not check for GPE during GRO but rather
install a different set of functions at setup time.
Fixes: e1e5314de0 ("vxlan: implement GPE")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The vxlan_parse_gpe_hdr function extracts the next protocol value from
the GPE header and marks GPE bits as parsed.
In order to be used in the next patch, split the function into protocol
extraction and bit marking. The bit marking is meaningful only in
vxlan_rcv; move it directly there.
Rename the function to vxlan_parse_gpe_proto to reflect what it now
does. Remove unused arguments skb and vxflags. Move the function earlier
in the file to allow it to be called from more places in the next patch.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
in atl1c_tso_csum, it should check the return value of pskb_trim(),
and return an error code if an unexpected value is returned
by pskb_trim().
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VXLAN-GPE does not add an extra inner Ethernet header. Take that into
account when calculating header length.
This causes problems in skb_tunnel_check_pmtu, where incorrect PMTU is
cached.
In the collect_md mode (which is the only mode that VXLAN-GPE
supports), there's no magic auto-setting of the tunnel interface MTU.
It can't be, since the destination and thus the underlying interface
may be different for each packet.
So, the administrator is responsible for setting the correct tunnel
interface MTU. Apparently, the administrators are capable enough to
calculate that the maximum MTU for VXLAN-GPE is (their_lower_MTU - 36).
They set the tunnel interface MTU to 1464. If you run a TCP stream over
such interface, it's then segmented according to the MTU 1464, i.e.
producing 1514 bytes frames. Which is okay, this still fits the lower
MTU.
However, skb_tunnel_check_pmtu (called from vxlan_xmit_one) uses 50 as
the header size and thus incorrectly calculates the frame size to be
1528. This leads to ICMP too big message being generated (locally),
PMTU of 1450 to be cached and the TCP stream to be resegmented.
The fix is to use the correct actual header size, especially for
skb_tunnel_check_pmtu calculation.
Fixes: e1e5314de0 ("vxlan: implement GPE")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
====================
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dwrr mode, the default bandwidth weight of disabled tc is set to 0.
If the bandwidth weight is 0, the mode will change to sp.
Therefore, disabled tc default bandwidth weight need changed to 1,
and 0 is returned when query the bandwidth weight of disabled tc.
In addition, driver need stop configure bandwidth weight if tc is disabled.
Fixes: 848440544b ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the weight saved by the driver is used as the query result,
which may be different from the actual weight in the register.
Therefore, the register value read from the firmware is used
as the query result
Fixes: 0e32038dc8 ("net: hns3: refactor dump tc of debugfs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the tm module is configured with traffic, traffic
may be abnormal. This patch fixes this problem.
Before the tm module is configured, traffic processing
should be stopped. After the tm module is configured,
traffic processing is enabled.
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current only the first 32 bits of the capability flag bit are considered.
When the matching capability flag bit is greater than 31 bits,
it will get an error bit.This patch use bitmap to solve this issue.
It can handle each capability bit whitout bit width limit.
Fixes: da77aef9cc ("net: hns3: create common cmdq resource allocate/free/query APIs")
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clear MV_V2_PORT_CTRL_PWRDOWN bit to set power up for 88x3310 PHY,
it sometimes does not take effect immediately. And a read of this
register causes the bit not to clear. This will cause mv3310_reset()
to time out, which will fail the config initialization. So add a delay
before the next access.
Fixes: c9cc1c815d ("net: phy: marvell10g: place in powersave mode at probe")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In iavf_adminq_task(), if the function can't acquire the
adapter->crit_lock, it checks if the driver is removing. If so, it simply
exits without re-enabling the interrupt. This is done to ensure that the
task stops processing as soon as possible once the driver is being removed.
However, if the IAVF_FLAG_PF_COMMS_FAILED is set, the function checks this
before attempting to acquire the lock. In this case, the function exits
early and re-enables the interrupt. This will happen even if the driver is
already removing.
Avoid this, by moving the check to after the adapter->crit_lock is
acquired. This way, if the driver is removing, we will not re-enable the
interrupt.
Fixes: fc2e6b3b13 ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In iavf_adminq_task(), if kzalloc() fails to allocate the event.msg_buf,
the function will exit without releasing the adapter->crit_lock.
This is unlikely, but if it happens, the next access to that mutex will
deadlock.
Fix this by moving the unlock to the end of the function, and adding a new
label to allow jumping to the unlock portion of the function exit flow.
Fixes: fc2e6b3b13 ("iavf: Rework mutexes for better synchronisation")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The debugfs_create_dir() function returns error pointers.
It never returns NULL. Most incorrect error checks were fixed,
but the one in i40e_dbg_init() was forgotten.
Fix the remaining error check.
Fixes: 02e9c29081 ("i40e: debugfs interface")
Signed-off-by: Wang Ming <machel@vivo.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents
packet loops so not supporting it results in freezing systems
of unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Xifr
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014
-----BEGIN PGP SIGNATURE-----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=s4eF
-----END PGP SIGNATURE-----
Merge tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix building with coredump disabled
- Fix use-after-free in hci_remove_adv_monitor
- Use RCU for hci_conn_params and iterate safely in hci_sync
- Fix locking issues on ISO and SCO
- Fix bluetooth on Intel Macbook 2014
* tag 'for-net-2023-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
Bluetooth: use RCU for hci_conn_params and iterate safely in hci_sync
====================
Link: https://lore.kernel.org/r/20230720190201.446469-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0qzt
-----END PGP SIGNATURE-----
Merge tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net:
The following patchset contains Netfilter fixes for net:
1. Fix spurious -EEXIST error from userspace due to
padding holes, this was broken since 4.9 days
when 'ignore duplicate entries on insert' feature was
added.
2. Fix a sched-while-atomic bug, present since 5.19.
3. Properly remove elements if they lack an "end range".
nft userspace always sets an end range attribute, even
when its the same as the start, but the abi doesn't
have such a restriction. Always broken since it was
added in 5.6, all three from myself.
4 + 5: Bound chain needs to be skipped in netns release
and on rule flush paths, from Pablo Neira.
* tag 'nf-23-07-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: skip bound chain on rule flush
netfilter: nf_tables: skip bound chain in netns release path
netfilter: nft_set_pipapo: fix improper element removal
netfilter: nf_tables: can't schedule in nft_chain_validate
netfilter: nf_tables: fix spurious set element insertion failure
====================
Link: https://lore.kernel.org/r/20230720165143.30208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mdio_bus_init() and phy_driver_register() both have error paths, and if
those are ever hit, ethtool will have a stale pointer to the
phy_ethtool_phy_ops stub structure, which references memory from a
module that failed to load (phylib).
It is probably hard to force an error in this code path even manually,
but the error teardown path of phy_init() should be the same as
phy_exit(), which is now simply not the case.
Fixes: 55d8f053ce ("net: phy: Register ethtool PHY operations")
Link: https://lore.kernel.org/netdev/ZLaiJ4G6TaJYGJyU@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230720000231.1939689-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: add missing annotations
This series was inspired by one syzbot (KCSAN) report.
do_tcp_getsockopt() does not lock the socket, we need to
annotate most of the reads there (and other places as well).
This is a first round, another series will come later.
====================
Link: https://lore.kernel.org/r/20230719212857.3943972-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_tcp_getsockopt() and reqsk_timer_handler() read
icsk->icsk_syn_retries while another cpu might change its value.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230719212857.3943972-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
