For DP we can use the same PPLL for all active DP
encoders. Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work. Also clean up the code
a bit.
v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
- document functions
- break in main encoder search loop after matching.
no need to keep checking additional encoders.
v4: - same as v3, but re-apply to drm-next as the corner
cases are fixed properly in subsequent patches.
fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MiscInfo field should be programmed with the crtc id
rather than the pll id. However, at this point the
two are the same for chips with this version of the table.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the proper struct in the union. That field
has the same offset in every struct, so no functional
change.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Roughly based on how nouveau is handling it. Instead of
adding the bo_va when the address is set add the bo_va
when the handle is opened, but set the address to zero
until userspace tells us where to place it.
This fixes another bunch of problems with glamor.
v2: agd5f: fix build after dropping patch 7/8.
Signed-off-by: Christian König <deathsimple@vodafone.de>
The no_wait param isn't used anywhere, and actually isn't
very usefull at all.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
It doesn't really belong into the object functions,
also rename it to avoid collisions with struct radeon_bo_va.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Even GPUs can have a null pointer dereference, so move
the IB pool to another offset to catch those.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
When a VM is used on more than one ring we need to
sync to the last user.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
This applies on top of drm/radeon: Mark all possible functions / structs as static.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let's allow GCC to optimize better.
This exposed some five unused functions, but this patch doesn't remove them.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently doing the update with the CP.
v2: Rebased on Jeromes bugfix. Make validity comparison
more human readable.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Make sure that the ib bo is bound and is page table is up to date
in the virtual address space.
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Removing the need to wait for anything.
Still not ideal, since we need to free pt on va remove.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Move binding onto the ring, simplifying handling a bit.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Move flushing the VMs as function into the rings.
First step to make VM operations async.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Store a reference to the VM into the IB structure, that
makes calculating the IBs address a bit less complicated.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Several encoder setup functions had the same duplicated
code for selecting the proper bpc setting for various
atom tables. Consolidate it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Verify the ATPX interface and track what ATPX functions
are available for future use.
v2: rework due to tree changes
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AMD ACPI interface may use ACPI_VIDEO_NOTIFY_PROBE to signal SBIOS
requests; block the keypress in this case since the user did not
actually press the mode switch key.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The standard video events may be overloaded for device specific
purposes. For example AMD ACPI interface overloads
ACPI_VIDEO_NOTIFY_PROBE (0x81) to signal AMD-specific events. In such
cases we don't want to send the keypress (KEY_SWITCHVIDEOMODE) to the
userspace because the user did not press the mode switch key (the
spurious keypress confuses the DE which usually changes the
display configuration and messes up a dual-screen setup).
This patch gives the handlers the chance to examine the event and
block the keypress if the event is device specific.
v2: refactor as suggested by Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it out of the radeon_pm.c and into radeon_acpi.c since
we use it for more than just pm now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up an handler for ACPI events and respond to brightness change
requests from the system BIOS.
v2: fix notification when using device-specific command codes
(tested by Pali Rohár <pali.rohar@gmail.com>); cache the encoder
controlling the backlight during the initialization to avoid searching
it every time (suggested by Alex Deucher).
v3: whitespace fixes (Alex Deucher).
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use GET_SYSTEM_PARAMS for retrieving the configuration for the system
BIOS notifications.
v2: packed struct (Lee, Chun-Yi <jlee@suse.com>)
v3: fix enable with device specific command code
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wrap the call to VERIFY_INTERFACE and add the parsing of the support
vectors.
v2: use a packed struct for handling the output of ACPI calls, hides
ugly pointer arithmetics (Lee, Chun-Yi <jlee@suse.com>).
v3: fix radeon_atif_parse_functions handling (Alex Deucher)
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't hard-code function number, this will allow to reuse the function.
v2: add support for the 2nd parameter (from Lee, Chun-Yi
<jlee@suse.com>).
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On systems that use the build in GPU backlight controller,
we can use atom tables to change the brightness level.
v2: use firmware flags
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A table in the vbios tells us whether the GPU backlight controller
is used or not. If the bit is set, the GPU backlight controller is
used; if it is not set, an off-chip backlight controller is used.
v2: store all the firmware flags, not just BL control
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new header that defines the AMD ACPI interface used
for laptops, PowerXpress, and chipset specific functionality
and update the current code to use it.
Todo:
- properly verify the ACPI interfaces
- hook up and handle ACPI notifications
- make PX code more robust
- implement PCIe Gen and width switching using ACPI
v2: fix typo in header
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows gcc to fold duplicate calls into a single call. Since
the current users do actually call it multiple times with the
same arguments, this is an obvious win.
Signed-off-by: Steven Fuerst <svfuerst@gmail.com>
We use __fls() to find the most significant bit. Using that, the
loop can be avoided. A second trick is to use the behaviour of the
rotate instructions to expand the range of the unsigned int to float
conversion to the full 32 bits in a branchless way.
The routine is now exact up to 2^24. Above that, we truncate which
is equivalent to rounding towards zero.
Signed-off-by: Steven Fuerst <svfuerst@gmail.com>
Remove the copy of i2f() in r600_blit_kms.c
We rename the function to something longer now that it is a global
symbol. This reduces the likelyhood of unintended clashes later.
This might be a candidate for inclusion inside general drm infrastructure.
However, at the moment only the radeon driver uses it.
Signed-off-by: Steven Fuerst <svfuerst@gmail.com>
