IOMMU Extended Feature Register (EFR) is used to communicate
the supported features for each IOMMU to the IOMMU driver.
This is normally read from the PCI MMIO register offset 0x30,
and used by the iommu_feature() helper function.
However, there are certain scenarios where the information is needed
prior to PCI initialization, and the iommu_feature() function is used
prematurely w/o warning. This has caused incorrect initialization of IOMMU.
This is the case for the commit 6d39bdee23 ("iommu/amd: Enforce 4k
mapping for certain IOMMU data structures")
Since, the EFR is also available in the IVHD header, and is available to
the driver prior to PCI initialization. Therefore, default to using
the IVHD EFR instead.
Fixes: 6d39bdee23 ("iommu/amd: Enforce 4k mapping for certain IOMMU data structures")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20210120135002.2682-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The AMD IOMMU initialisation registers the IRQ remapping domain for
each IOMMU before doing the final sanity check that every I/OAPIC is
covered.
This means that the AMD irq_remapping_select() function gets invoked
even when IRQ remapping has been disabled, eventually leading to a NULL
pointer dereference in alloc_irq_table().
Unfortunately, the IVRS isn't fully parsed early enough that the sanity
check can be done in time to registering the IRQ domain altogether.
Doing that would be nice, but is a larger and more error-prone task. The
simple fix is just for irq_remapping_select() to refuse to report a
match when IRQ remapping has disabled.
Link: https://lore.kernel.org/lkml/ed4be9b4-24ac-7128-c522-7ef359e8185d@gmx.at
Fixes: a1a785b572 ("iommu/amd: Implement select() method on remapping irqdomain")
Reported-by: Johnathan Smithinovic <johnathan.smithinovic@gmx.at>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/04bbe8bca87f81a3cfa93ec4299e53f47e00e5b3.camel@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
When I made the INTCAPXT support stop gratuitously pretending to be MSI,
I missed the fact that iommu_setup_msi() also sets the ->int_enabled
flag. I missed this in the iommu_setup_intcapxt() code path, which means
that a resume from suspend will try to allocate the IRQ domains again,
accidentally re-enabling interrupts as it does, resulting in much sadness.
Lift out the bit which sets iommu->int_enabled into the iommu_init_irq()
function which is also where it gets checked.
Link: https://lore.kernel.org/r/20210104132250.GE32151@zn.tnic/
Fixes: d1adcfbb52 ("iommu/amd: Fix IOMMU interrupt generation in X2APIC mode")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/50cd5f55be8ead0937ac315cd2f5b89364f6a9a5.camel@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
- IOVA allocation optimisations and removal of unused code
- Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
page-table of an IOMMU domain
- Support for changing the default domain type in sysfs
- Optimisation to the way in which identity-mapped regions are created
- Driver updates:
* Arm SMMU updates, including continued work on Shared Virtual Memory
* Tegra SMMU updates, including support for PCI devices
* Intel VT-D updates, including conversion to the IOMMU-DMA API
- Cleanup, kerneldoc and minor refactoring
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl/XWy8QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNPejB/46QsXATkWt7hbDPIxlUvzUG8VP/FBNJ6A3
/4Z+4KBXR3zhvZJOEqTarnm6Uc22tWkYpNS3QAOuRW0EfVeD8H+og4SOA2iri5tR
x3GZUCng93APWpHdDtJP7kP/xuU47JsBblY/Ip9aJKYoXi9c9svtssAqKr008wxr
knv/xv/awQ0O7CNc3gAoz7mUagQxG/no+HMXMT3Fz9KWRzzvTi6s+7ZDm2faI0hO
GEJygsKbXxe1qbfeGqKTP/67EJVqjTGsLCF2zMogbnnD7DxadJ2hP0oNg5tvldT/
oDj9YWG6oLMfIVCwDVQXuWNfKxd7RGORMbYwKNAaRSvmkli6625h
=KFOO
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull IOMMU updates from Will Deacon:
"There's a good mixture of improvements to the core code and driver
changes across the board.
One thing worth pointing out is that this includes a quirk to work
around behaviour in the i915 driver (see 65f746e828 ("iommu: Add
quirk for Intel graphic devices in map_sg")), which otherwise
interacts badly with the conversion of the intel IOMMU driver over to
the DMA-IOMMU APU but has being fixed properly in the DRM tree.
We'll revert the quirk later this cycle once we've confirmed that
things don't fall apart without it.
Summary:
- IOVA allocation optimisations and removal of unused code
- Introduction of DOMAIN_ATTR_IO_PGTABLE_CFG for parameterising the
page-table of an IOMMU domain
- Support for changing the default domain type in sysfs
- Optimisation to the way in which identity-mapped regions are
created
- Driver updates:
* Arm SMMU updates, including continued work on Shared Virtual
Memory
* Tegra SMMU updates, including support for PCI devices
* Intel VT-D updates, including conversion to the IOMMU-DMA API
- Cleanup, kerneldoc and minor refactoring"
* tag 'iommu-updates-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (50 commits)
iommu/amd: Add sanity check for interrupt remapping table length macros
dma-iommu: remove __iommu_dma_mmap
iommu/io-pgtable: Remove tlb_flush_leaf
iommu: Stop exporting free_iova_mem()
iommu: Stop exporting alloc_iova_mem()
iommu: Delete split_and_remove_iova()
iommu/io-pgtable-arm: Remove unused 'level' parameter from iopte_type() macro
iommu: Defer the early return in arm_(v7s/lpae)_map
iommu: Improve the performance for direct_mapping
iommu: avoid taking iova_rbtree_lock twice
iommu/vt-d: Avoid GFP_ATOMIC where it is not needed
iommu/vt-d: Remove set but not used variable
iommu: return error code when it can't get group
iommu: Fix htmldocs warnings in sysfs-kernel-iommu_groups
iommu: arm-smmu-impl: Add a space before open parenthesis
iommu: arm-smmu-impl: Use table to list QCOM implementations
iommu/arm-smmu: Move non-strict mode to use io_pgtable_domain_attr
iommu/arm-smmu: Add support for pagetable config domain attribute
iommu: Document usage of "/sys/kernel/iommu_groups/<grp_id>/type" file
iommu: Take lock before reading iommu group default domain type
...
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead of
having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized IOMMU
when the hypervisor supports it. This has made been possible by the
above modifications and also simplifies the existing workaround in the
HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies.
-----BEGIN PGP SIGNATURE-----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=8Gfs
-----END PGP SIGNATURE-----
Merge tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"Yet another large set of x86 interrupt management updates:
- Simplification and distangling of the MSI related functionality
- Let IO/APIC construct the RTE entries from an MSI message instead
of having IO/APIC specific code in the interrupt remapping drivers
- Make the retrieval of the parent interrupt domain (vector or remap
unit) less hardcoded and use the relevant irqdomain callbacks for
selection.
- Allow the handling of more than 255 CPUs without a virtualized
IOMMU when the hypervisor supports it. This has made been possible
by the above modifications and also simplifies the existing
workaround in the HyperV specific virtual IOMMU.
- Cleanup of the historical timer_works() irq flags related
inconsistencies"
* tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/ioapic: Cleanup the timer_works() irqflags mess
iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select()
iommu/amd: Fix IOMMU interrupt generation in X2APIC mode
iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled
iommu/amd: Fix union of bitfields in intcapxt support
x86/ioapic: Correct the PCI/ISA trigger type selection
x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index
x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it
x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected
iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available
x86/apic: Support 15 bits of APIC ID in MSI where available
x86/ioapic: Handle Extended Destination ID field in RTE
iommu/vt-d: Simplify intel_irq_remapping_select()
x86: Kill all traces of irq_remapping_get_irq_domain()
x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain
x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain
iommu/hyper-v: Implement select() method on remapping irqdomain
iommu/vt-d: Implement select() method on remapping irqdomain
iommu/amd: Implement select() method on remapping irqdomain
x86/apic: Add select() method on vector irqdomain
...
Currently, macros related to the interrupt remapping table length are
defined separately. This has resulted in an oversight in which one of
the macros were missed when changing the length. To prevent this,
redefine the macros to add built-in sanity check.
Also, rename macros to use the name of the DTE[IntTabLen] field as
specified in the AMD IOMMU specification. There is no functional change.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20201210162436.126321-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
According to the AMD IOMMU spec, the commit 73db2fc595
("iommu/amd: Increase interrupt remapping table limit to 512 entries")
also requires the interrupt table length (IntTabLen) to be set to 9
(power of 2) in the device table mapping entry (DTE).
Fixes: 73db2fc595 ("iommu/amd: Increase interrupt remapping table limit to 512 entries")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20201207091920.3052-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
AMD IOMMU requires 4k-aligned pages for the event log, the PPR log,
and the completion wait write-back regions. However, when allocating
the pages, they could be part of large mapping (e.g. 2M) page.
This causes #PF due to the SNP RMP hardware enforces the check based
on the page level for these data structures.
So, fix by calling set_memory_4k() on the allocated pages.
Fixes: c69d89aff3 ("iommu/amd: Use 4K page for completion wait write-back semaphore")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20201105145832.3065-1-suravee.suthikulpanit@amd.com
Signed-off-by: Will Deacon <will@kernel.org>
The AMD IOMMU has two modes for generating its own interrupts.
The first is very much based on PCI MSI, and can be configured by Linux
precisely that way. But like legacy unmapped PCI MSI it's limited to
8 bits of APIC ID.
The second method does not use PCI MSI at all in hardawre, and instead
configures the INTCAPXT registers in the IOMMU directly with the APIC ID
and vector.
In the latter case, the IOMMU driver would still use pci_enable_msi(),
read back (through MMIO) the MSI message that Linux wrote to the PCI MSI
table, then swizzle those bits into the appropriate register.
Historically, this worked because__irq_compose_msi_msg() would silently
generate an invalid MSI message with the high bits of the APIC ID in the
high bits of the MSI address. That hack was intended only for the Intel
IOMMU, and I recently enforced that, introducing a warning in
__irq_msi_compose_msg() if it was invoked with an APIC ID above 255.
Fix the AMD IOMMU not to depend on that hack any more, by having its own
irqdomain and directly putting the bits from the irq_cfg into the right
place in its ->activate() method.
Fixes: 47bea873cf "x86/msi: Only use high bits of MSI address for DMAR unit")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/05e3a5ba317f5ff48d2f8356f19e617f8b9d23a4.camel@infradead.org
Registering the remapping irq domain unconditionally is potentially
allowing I/O-APIC and MSI interrupts to be parented in the IOMMU IR domain
even when IR is disabled. Don't do that.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-1-dwmw2@infradead.org
All the bitfields in here are overlaid on top of each other since
they're a union. Change the second u64 to be in a struct so it does
the intended thing.
Fixes: b5c3786ee3 ("iommu/amd: Use msi_msg shadow structs")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201111144322.1659970-2-dwmw2@infradead.org
Certain device drivers allocate IO queues on a per-cpu basis.
On AMD EPYC platform, which can support up-to 256 cpu threads,
this can exceed the current MAX_IRQ_PER_TABLE limit of 256,
and result in the error message:
AMD-Vi: Failed to allocate IRTE
This has been observed with certain NVME devices.
AMD IOMMU hardware can actually support upto 512 interrupt
remapping table entries. Therefore, update the driver to
match the hardware limit.
Please note that this also increases the size of interrupt remapping
table to 8KB per device when using the 128-bit IRTE format.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20201015025002.87997-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The I/O-APIC generates an MSI cycle with address/data bits taken from its
Redirection Table Entry in some combination which used to make sense, but
now is just a bunch of bits which get passed through in some seemingly
arbitrary order.
Instead of making IRQ remapping drivers directly frob the I/OA-PIC RTE, let
them just do their job and generate an MSI message. The bit swizzling to
turn that MSI message into the I/O-APIC's RTE is the same in all cases,
since it's a function of the I/O-APIC hardware. The IRQ remappers have no
real need to get involved with that.
The only slight caveat is that the I/OAPIC is interpreting some of those
fields too, and it does want the 'vector' field to be unique to make EOI
work. The AMD IOMMU happens to put its IRTE index in the bits that the
I/O-APIC thinks are the vector field, and accommodates this requirement by
reserving the first 32 indices for the I/O-APIC. The Intel IOMMU doesn't
actually use the bits that the I/O-APIC thinks are the vector field, so it
fills in the 'pin' value there instead.
[ tglx: Replaced the unreadably macro maze with the cleaned up RTE/msi_msg
bitfields and added commentry to explain the mapping magic ]
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-22-dwmw2@infradead.org
Having two seperate structs for the I/O-APIC RTE entries (non-remapped and
DMAR remapped) requires type casts and makes it hard to map.
Combine them in IO_APIC_routing_entry by defining a union of two 64bit
bitfields. Use naming which reflects which bits are shared and which bits
are actually different for the operating modes.
[dwmw2: Fix it up and finish the job, pulling the 32-bit w1,w2 words for
register access into the same union and eliminating a few more
places where bits were accessed through masks and shifts.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-21-dwmw2@infradead.org
'trigger' and 'polarity' are used throughout the I/O-APIC code for handling
the trigger type (edge/level) and the active low/high configuration. While
there are defines for initializing these variables and struct members, they
are not used consequently and the meaning of 'trigger' and 'polarity' is
opaque and confusing at best.
Rename them to 'is_level' and 'active_low' and make them boolean in various
structs so it's entirely clear what the meaning is.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-20-dwmw2@infradead.org
Get rid of the macro mess and use the shadow structs for the x86 specific
MSI message format. Convert the intcapxt setup to use named bitfields as
well while touching it anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-15-dwmw2@infradead.org
apic::irq_dest_mode is actually a boolean, but defined as u32 and named in
a way which does not explain what it means.
Make it a boolean and rename it to 'dest_mode_logical'
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-9-dwmw2@infradead.org
The enum ioapic_irq_destination_types and the enumerated constants starting
with 'dest_' are gross misnomers because they describe the delivery mode.
Rename then enum and the constants so they actually make sense.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-6-dwmw2@infradead.org
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----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=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Including:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with
CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel
command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will
fault when a device tries DMA on memory owned by a guest. This
needs new fault-types as well as a rewrite of the IOMMU memory
semaphore for command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to
still be used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can
access address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
-----BEGIN PGP SIGNATURE-----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=C0Sg
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- ARM-SMMU Updates from Will:
- Continued SVM enablement, where page-table is shared with CPU
- Groundwork to support integrated SMMU with Adreno GPU
- Allow disabling of MSI-based polling on the kernel command-line
- Minor driver fixes and cleanups (octal permissions, error
messages, ...)
- Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when
a device tries DMA on memory owned by a guest. This needs new
fault-types as well as a rewrite of the IOMMU memory semaphore for
command completions.
- Allow broken Intel IOMMUs (wrong address widths reported) to still be
used for interrupt remapping.
- IOMMU UAPI updates for supporting vSVA, where the IOMMU can access
address spaces of processes running in a VM.
- Support for the MT8167 IOMMU in the Mediatek IOMMU driver.
- Device-tree updates for the Renesas driver to support r8a7742.
- Several smaller fixes and cleanups all over the place.
* tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits)
iommu/vt-d: Gracefully handle DMAR units with no supported address widths
iommu/vt-d: Check UAPI data processed by IOMMU core
iommu/uapi: Handle data and argsz filled by users
iommu/uapi: Rename uapi functions
iommu/uapi: Use named union for user data
iommu/uapi: Add argsz for user filled data
docs: IOMMU user API
iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate()
iommu/arm-smmu-v3: Add SVA device feature
iommu/arm-smmu-v3: Check for SVA features
iommu/arm-smmu-v3: Seize private ASID
iommu/arm-smmu-v3: Share process page tables
iommu/arm-smmu-v3: Move definitions to a header
iommu/io-pgtable-arm: Move some definitions to a header
iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer
iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB
iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR
iommu/amd: Use 4K page for completion wait write-back semaphore
iommu/tegra-smmu: Allow to group clients in same swgroup
iommu/tegra-smmu: Fix iova->phys translation
...
devices which require non-PCI based MSI handling.
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which allows
to utilize the full functionality of hierarchical irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain
which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch and
let the last few users select it.
-----BEGIN PGP SIGNATURE-----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=JlqV
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq updates from Thomas Gleixner:
"Surgery of the MSI interrupt handling to prepare the support of
upcoming devices which require non-PCI based MSI handling:
- Cleanup historical leftovers all over the place
- Rework the code to utilize more core functionality
- Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain
assignment to PCI devices possible.
- Assign irqdomains to PCI devices at initialization time which
allows to utilize the full functionality of hierarchical
irqdomains.
- Remove arch_.*_msi_irq() functions from X86 and utilize the
irqdomain which is assigned to the device for interrupt management.
- Make the arch_.*_msi_irq() support conditional on a config switch
and let the last few users select it"
* tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS
x86/apic/msi: Unbreak DMAR and HPET MSI
iommu/amd: Remove domain search for PCI/MSI
iommu/vt-d: Remove domain search for PCI/MSI[X]
x86/irq: Make most MSI ops XEN private
x86/irq: Cleanup the arch_*_msi_irqs() leftovers
PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable
x86/pci: Set default irq domain in pcibios_add_device()
iommm/amd: Store irq domain in struct device
iommm/vt-d: Store irq domain in struct device
x86/xen: Wrap XEN MSI management into irqdomain
irqdomain/msi: Allow to override msi_domain_alloc/free_irqs()
x86/xen: Consolidate XEN-MSI init
x86/xen: Rework MSI teardown
x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init()
PCI/MSI: Provide pci_dev_has_special_msi_domain() helper
PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI
irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI
x86/irq: Initialize PCI/MSI domain at PCI init time
x86/pci: Reducde #ifdeffery in PCI init code
...
devices which doesn't need pinning of pages for DMA anymore. Add support
for the command submission to devices using new x86 instructions like
ENQCMD{,S} and MOVDIR64B. In addition, add support for process address
space identifiers (PASIDs) which are referenced by those command
submission instructions along with the handling of the PASID state on
context switch as another extended state. Work by Fenghua Yu, Ashok Raj,
Yu-cheng Yu and Dave Jiang.
-----BEGIN PGP SIGNATURE-----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=K9X4
-----END PGP SIGNATURE-----
Merge tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 PASID updates from Borislav Petkov:
"Initial support for sharing virtual addresses between the CPU and
devices which doesn't need pinning of pages for DMA anymore.
Add support for the command submission to devices using new x86
instructions like ENQCMD{,S} and MOVDIR64B. In addition, add support
for process address space identifiers (PASIDs) which are referenced by
those command submission instructions along with the handling of the
PASID state on context switch as another extended state.
Work by Fenghua Yu, Ashok Raj, Yu-cheng Yu and Dave Jiang"
* tag 'x86_pasid_for_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Add an enqcmds() wrapper for the ENQCMDS instruction
x86/asm: Carve out a generic movdir64b() helper for general usage
x86/mmu: Allocate/free a PASID
x86/cpufeatures: Mark ENQCMD as disabled when configured out
mm: Add a pasid member to struct mm_struct
x86/msr-index: Define an IA32_PASID MSR
x86/fpu/xstate: Add supervisor PASID state for ENQCMD
x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions
Documentation/x86: Add documentation for SVA (Shared Virtual Addressing)
iommu/vt-d: Change flags type to unsigned int in binding mm
drm, iommu: Change type of pasid to u32
Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 387caf0b75 ("iommu/amd: Treat per-device exclusion
ranges as r/w unity-mapped regions") accidentally overwrites
the 'flags' field in IVMD (struct ivmd_header) when the I/O
virtualization memory definition is associated with the
exclusion range entry. This leads to the corrupted IVMD table
(incorrect checksum). The kdump kernel reports the invalid checksum:
ACPI BIOS Warning (bug): Incorrect checksum in table [IVRS] - 0x5C, should be 0x60 (20200717/tbprint-177)
AMD-Vi: [Firmware Bug]: IVRS invalid checksum
Fix the above-mentioned issue by modifying the 'struct unity_map_entry'
member instead of the IVMD header.
Cleanup: The *exclusion_range* functions are not used anymore, so
get rid of them.
Fixes: 387caf0b75 ("iommu/amd: Treat per-device exclusion ranges as r/w unity-mapped regions")
Reported-and-tested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Adrian Huang <ahuang12@lenovo.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20200926102602.19177-1-adrianhuang0701@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When the IOMMU SNP support bit is set in the IOMMU Extended Features
register, hardware re-purposes the following registers:
1. IOMMU Exclusion Base register (MMIO offset 0020h) to
Completion Wait Write-Back (CWWB) Base register
2. IOMMU Exclusion Range Limit (MMIO offset 0028h) to
Completion Wait Write-Back (CWWB) Range Limit register
and requires the IOMMU CWWB semaphore base and range to be programmed
in the register offset 0020h and 0028h accordingly.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
IOMMU SNP support requires the completion wait write-back semaphore to be
implemented using a 4K-aligned page, where the page address is to be
programmed into the newly introduced MMIO base/range registers.
This new scheme uses a per-iommu atomic variable to store the current
semaphore value, which is incremented for every completion wait command.
Since this new scheme is also compatible with non-SNP mode,
generalize the driver to use 4K page for completion-wait semaphore in
both modes.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20200923121347.25365-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating
128-bit IRTE") removed an assumption that modify_irte_ga always set
the valid bit, which requires the callers to set the appropriate value
for the struct irte_ga.valid bit before calling the function.
Similar to the commit 26e495f341 ("iommu/amd: Restore IRTE.RemapEn
bit after programming IRTE"), which is for the function
amd_iommu_deactivate_guest_mode().
The same change is also needed for the amd_iommu_activate_guest_mode().
Otherwise, this could trigger IO_PAGE_FAULT for the VFIO based VMs with
AVIC enabled.
Fixes: e52d58d54a ("iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE")
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200916111720.43913-1-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit 26e495f341 ("iommu/amd: Restore IRTE.RemapEn bit after
programming IRTE"), smatch warns:
drivers/iommu/amd/iommu.c:3870 amd_iommu_deactivate_guest_mode()
warn: variable dereferenced before check 'entry' (see line 3867)
Fix this by moving the @valid assignment to after @entry has been checked
for NULL.
Fixes: 26e495f341 ("iommu/amd: Restore IRTE.RemapEn bit after programming IRTE")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20200910171621.12879-1-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".
No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com
As the next step to make X86 utilize the direct MSI irq domain operations
store the irq domain pointer in the device struct when a device is probed.
It only overrides the irqdomain of devices which are handled by a regular
PCI/MSI irq domain which protects PCI devices behind special busses like
VMD which have their own irq domain.
No functional change.
It just avoids the redirection through arch_*_msi_irqs() and allows the
PCI/MSI core to directly invoke the irq domain alloc/free functions instead
of having to look up the irq domain for every single MSI interupt.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112333.806328762@linutronix.de
Convert the interrupt remap drivers to retrieve the pci device from the msi
descriptor and use info::hwirq.
This is the first step to prepare x86 for using the generic MSI domain ops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.466405395@linutronix.de
Move the IOAPIC specific fields into their own struct and reuse the common
devid. Get rid of the #ifdeffery as it does not matter at all whether the
alloc info is a couple of bytes longer or not.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112332.054367732@linutronix.de
Now that the iommu implementations handle the X86_*_GET_PARENT_DOMAIN
types, consolidate the two getter functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.741909337@linutronix.de
The irq domain request mode is now indicated in irq_alloc_info::type.
Consolidate the two getter functions into one.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.634777249@linutronix.de
irq_remapping_ir_irq_domain() is used to retrieve the remapping parent
domain for an allocation type. irq_remapping_irq_domain() is for retrieving
the actual device domain for allocating interrupts for a device.
The two functions are similar and can be unified by using explicit modes
for parent irq domain retrieval.
Add X86_IRQ_ALLOC_TYPE_IOAPIC/HPET_GET_PARENT and use it in the iommu
implementations. Drop the parent domain retrieval for PCI_MSI/X as that is
unused.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200826112331.436350257@linutronix.de
Dereferencing irq_data before checking it for NULL is suboptimal.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
When memory encryption is active the device is likely not in a direct
mapped domain. Forbid using IOMMUv2 functionality for now until finer
grained checks for this have been implemented.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-3-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Do not force devices supporting IOMMUv2 to be direct mapped when memory
encryption is active. This might cause them to be unusable because their
DMA mask does not include the encryption bit.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20200824105415.21000-2-joro@8bytes.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.
However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.
IOMMU Driver Device IRQ
============ ===========
irte.RemapEn=0
...
change IRTE IRQ from device ==> IO_PAGE_FAULT !!
...
irte.RemapEn=1
This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.
Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).
Fixes: 880ac60e25 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently, the RemapEn (valid) bit is accidentally cleared when
programming IRTE w/ guestMode=0. It should be restored to
the prior state.
Fixes: b9fc6b56f4 ("iommu/amd: Implements irq_set_vcpu_affinity() hook to setup vapic mode for pass-through devices")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-2-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix W=1 compile warnings (invalid kerneldoc):
drivers/iommu/amd/init.c:1586: warning: Function parameter or member 'ivrs' not described in 'get_highest_supported_ivhd_type'
drivers/iommu/amd/init.c:1938: warning: Function parameter or member 'iommu' not described in 'iommu_update_intcapxt'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200728170859.28143-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Few exported functions from AMD IOMMU driver are missing prototypes.
They have declaration in arch/x86/events/amd/iommu.h but this file
cannot be included in the driver. Add prototypes to fix W=1 warnings
like:
drivers/iommu/amd/init.c:3066:19: warning:
no previous prototype for 'get_amd_iommu' [-Wmissing-prototypes]
3066 | struct amd_iommu *get_amd_iommu(unsigned int idx)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200727183631.16744-1-krzk@kernel.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
