This includes extra changes:
- The allocation for unmap_array[] and pointers[]
Now we allocate them in one go, and free them together.
- Remove @err
Use errno_to_blk_status(ret) instead.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This new helper will be also utilized in the incoming refactor of
recovery path.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently finish_rmw() will update the P/Q stripes before submitting
the writes.
It's done behind a for(;;) loop, it's a little congested indent-wise, so
extract the code into a helper called generate_pq_vertical().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This refactor includes the following behavior change first:
- Don't error out if only P/Q is corrupted
The old code will directly error out if only P/Q is corrupted.
Although it is an logical error if we go into rebuild path with
only P/Q corrupted, there is no need to error out.
Just skip the rebuild and return the already good data.
Then comes the following refactor which shouldn't cause behavior
changes:
- Introduce a helper to do vertical stripe recovery
This not only reduce one indent level, but also paves the road for
later data checksum verification in RMW cycles.
- Sort rbio->faila/b before recovery
So we don't need to do the same swap every vertical stripe
- Replace a BUG_ON() with ASSERT()
Or checkpatch won't let me pass.
- Mark recovered sectors uptodate after the recover loop
- Do the cleanup for pointers unconditionally
We only need to initialize @pointers and @unmap_array to NULL, so
we can safely free them unconditionally.
- Mark the repaired sector uptodate in recover_vertical()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The two structures appear on the same call paths, btrfs_bio_ctrl is
embedded in extent_page_data and we pass bio_ctrl to some functions.
After merging there are fewer indirections and we have only one control
structure. The packing remains same.
The btrfs_bio_ctrl was selected as the target structure as the operation
is closer to bio processing.
Structure layout:
struct btrfs_bio_ctrl {
struct bio * bio; /* 0 8 */
int mirror_num; /* 8 4 */
enum btrfs_compression_type compress_type; /* 12 4 */
u32 len_to_stripe_boundary; /* 16 4 */
u32 len_to_oe_boundary; /* 20 4 */
btrfs_bio_end_io_t end_io_func; /* 24 8 */
bool extent_locked; /* 32 1 */
bool sync_io; /* 33 1 */
/* size: 40, cachelines: 1, members: 8 */
/* padding: 6 */
/* last cacheline: 40 bytes */
};
Signed-off-by: David Sterba <dsterba@suse.com>
The semantics of the two members is a boolean, so change the type
accordingly. We have space in extent_page_data due to alignment there's
no change in size.
Signed-off-by: David Sterba <dsterba@suse.com>
The div_factor* helpers calculate fraction or percentage fraction. The
name is a bit confusing, we use it only for percentage calculations and
there are two helpers.
There's a helper mult_frac that's for general fractions, that tries to
be accurate but we multiply and divide by small numbers so we can use
the div_u64 helper.
Rename the div_factor* helpers and use 1..100 percentage range, also drop
the case checking for percentage == 100, it's never hit.
The conversions:
* div_factor calculates tenths and the numbers need to be adjusted
* div_factor_fine is direct replacement
Signed-off-by: David Sterba <dsterba@suse.com>
If when doing a direct IO write we need to fallback to buffered IO, we
this comment at btrfs_direct_write() that says we can't directly fallback
to buffered IO if we have a NOWAIT iocb, because we have no support for
NOWAIT buffered writes. That is not true anymore, as support for NOWAIT
buffered writes was added recently in commit 926078b21d ("btrfs: enable
nowait async buffered writes").
However we still can't fallback to a buffered write in case we have a
NOWAIT iocb, because we'll need to flush delalloc and wait for it to
complete after doing the buffered write, and that can block for several
reasons, the main reason being waiting for IO to complete.
So update the comment to mention all that.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The header files should use the /* */ comment style, introduced in
commit f3a84ccd28 ("btrfs: move the tree mod log code into its own
file").
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we have inline extent read code behind two levels of
indentation, factor them them out into a new function,
read_inline_extent(), to make it a little easier to read.
Since we're here, also remove @extent_offset and @pg_offset arguments
from uncompress_inline() function, as it's not possible to have inline
extents at non-inline file offset.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The argument @new_inline changes the following members of extent_map:
- em->compress_type
- EXTENT_FLAG_COMPRESSED of em->flags
However neither members makes a difference for inline extents:
- Inline extent read never use above em members
As inside btrfs_get_extent() we directly use the file extent item to
do the read.
- Inline extents are never to be split
Thus code really needs em->compress_type or that flag will never be
executed on inlined extents.
(btrfs_drop_extent_cache() would be one example)
- Fiemap no longer relies on extent maps
Recent fiemap optimization makes fiemap to search subvolume tree
directly, without using any extent map at all.
Thus those members make no difference for inline extents any more.
Furthermore such exception without much explanation is really a source
of confusion.
Thus this patch will completely remove the argument, and always set the
involved members, unifying the behavior.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently for inline extents read inside btrfs_get_extent(), we will
reset several extent map members:
- em->start
Reset to extent_start, which is completely unnecessary.
The extent_start and em->start should have already be zero, ensured by
tree-checker already.
- em->len
Reset the round_up(copy_size, fs_info->sectorsize), which is again
unnecessary.
- em->orig_block_len
Reset to em->len (sectorsize), while it is originally unset from
btrfs_extent_item_to_extent_map().
This makes no difference, as all extent map handling paths will
ignore the orig_block_len if they found it's an inlined extent.
Such inline extent orig_block_len ignoring examples can be found in
btrfs_drop_extent_cache().
- em->orig_start
Reset to em->start (0), while it is originally set to EXTENT_MAP_HOLE.
This makes no difference either, as all extent map handling paths will
ignore the em->orig_start if they found it's an inline extent.
Thus all these em members resetting are unnecessary.
Replace them with ASSERT()s checking the only two members (block_start
and length) that make sense.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we calculate inline extent read in a way that inline extent
can start at non-zero offset.
This is consistent with the inode selftests, which puts an inline extent
at file offset 5.
Meanwhile the inline extent creation code will only create inline extent
at file offset 0.
Furthermore with the introduction of tree-checker on file extents, we are
actively rejecting inline extent which starts at non-zero file offset.
And so far we haven't yet seen any report of rejected inline extents at
non-zero file offset.
This all means, the extra calculation to support inline extents at
non-zero file offset is mostly paper weight, and damaging the
readability of the code.
Thus this patch will:
- Add extra ASSERT()s to make sure involved file offset are all 0
- Remove @extent_offset calculation
- Simplify the involved code
As several variables are now single-use, no need to declare them as
a variable anymore.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In our inode-tests.c, we create an inline offset at file offset 5, which
is no longer possible since the introduction of tree-checker.
Thus I don't think we should spend time maintaining some corner cases
which are already ruled out by tree-checker.
So this patch will:
- Change the inline extent to start at file offset 0
Also change its length to 6 to cover the original length
- Add an extra ASSERT() for btrfs_add_extent_mapping()
This is to make sure tree-checker is working correctly.
- Update the inode selftest
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into orphan.h to cut down on code in ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This will make syncing fs.h to user space a little easier if we can pull
the super block specific helpers out of fs.h and put them in super.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into super.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have a few of these in fs.h, move the remaining checks out of
ctree.h into fs.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into verity.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We already have a dev-replace.h, simply move these prototypes and
helpers into dev-replace.h where they belong.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into scrub.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into relocation.h to cut down on code in
ctree.h
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into acl.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These belong in extent-tree.h, they were missed because they were not
grouped with the other extent-tree.c prototypes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The code for these functions are in messages.c, move the defines and
prototypes to messages.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into file.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into ioctl.h to cut down on code in ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these out of ctree.h into uuid-tree.h to cut down on the code in
ctree.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into file-item.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move these prototypes out of ctree.h and into their own header file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that the defrag code is all in one file, create a defrag.h and move
all the defrag related prototypes and helper out of ctree.h and into
defrag.h.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the other big portion of defrag code that has existed in
ioctl.c. Move it to its new home in defrag.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This currently exists in file.c, move it to the more natural location in
defrag.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ reformat comments ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This currently has only one helper in it, and it's for tree based
defrag. We have the various defrag code in 3 different places, so
rename this to defrag.c. Followup patches will move the code into this
new file.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I initially wanted to make a new header file for this, but these
prototypes do naturally fit into btrfs_inode.h. If we want to extract
vfs from pure btrfs code in the future we may need to split this up, but
btrfs_inode embeds the vfs_inode, so it makes sense to put the
prototypes in this header for now.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These helpers are core to btrfs, and in order to more easily sync
various parts of the btrfs kernel code into btrfs-progs we need to be
able to carry these helpers with us. However we want to have our own
implementation for the helpers themselves, currently they're implemented
in different files that we want to sync inside of btrfs-progs itself.
Move these into their own C file, this will allow us to contain our
overrides in btrfs-progs in it's own file without messing with the rest
of the codebase.
In copying things over I fixed up a few whitespace errors that already
existed.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When moving the printk messages into their own file I got a compiler
error because the includes grabbed compression.h, but nothing pulled in
the blk_types.h dependency that compression.h has because it uses
blkstatus_t. Add blk_types.h to compression.h so that this sort of
thing doesn't happen in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's several structures that are embedded inside of fs_info.h, so if
we don't have all the proper includes when we include fs.h we'll get a
variety of compile errors. I fixed this by adding a temporary c file
that just had #include "fs.h" and then added include files until the
compiler stopped complaining.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is used by the volumes code and the tree checker code. We want to
maintain inline however, so simply move it to volumes.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Do away with the defines and use an enum as it's cleaner.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update, reformat or reword function comments. This also removes the kdoc
marker so we don't get reports when the function name is missing.
Changes made:
- remove kdoc markers
- reformat the brief description to be a proper sentence
- reword to imperative voice
- align parameter list
- fix typos
Signed-off-by: David Sterba <dsterba@suse.com>
The last user of this was removed in 7f9fe61440 ("btrfs: improve
global reserve stealing logic"), drop this code as it's no longer called
by anybody.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I wrote the following coccinelle script to find function declarations
that didn't have the corresponding code for them
@funcproto@
identifier func;
type T;
position p0;
@@
T func@p0(...);
@funccode@
identifier funcproto.func;
position p1;
@@
func@p1(...) { ... }
@script:python depends on !funccode@
p0 << funcproto.p0;
@@
print("Proto with no function at %s:%s" % (p0[0].file, p0[0].line))
and ran it against btrfs, which identified the 4 function prototypes
I've removed in this patch.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the root-tree.c prototypes to root-tree.h, and then update all
the necessary files to include the new header.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This batch of prototypes no longer have code associated with them, so
remove them.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These exist in delalloc-space.c, move them from ctree.h into
delalloc-space.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Move all the extent tree related prototypes to extent-tree.h out of
ctree.h, and then go include it everywhere needed so everything
compiles.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This was prototyped in ctree.h and the code existed in extent-tree.c,
but it's space-info related so move it into space-info.c.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These are defined already in space-info.h, remove them from ctree.h.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We've accumulated some whitespace problems in ctree.h, clean these up.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
