It doesn't make sense to allocate a COW extent when unsharing a hole
because holes cannot be shared.
Fixes: 1f1397b721 ("xfs: don't allocate into the data fork for an unshare request")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/172796813277.1131942.5486112889531210260.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The background blockgc scanner runs on a 5m interval by default and
trims preallocation (post-eof and cow fork) from inodes that are
otherwise idle. Idle effectively means that iolock can be acquired
without blocking and that the inode has no dirty pagecache or I/O in
flight.
This simple mechanism and heuristic has worked fairly well for
post-eof speculative preallocations. Support for reflink and COW
fork preallocations came sometime later and plugged into the same
mechanism, with similar heuristics. Some recent testing has shown
that COW fork preallocation may be notably more sensitive to blockgc
processing than post-eof preallocation, however.
For example, consider an 8GB reflinked file with a COW extent size
hint of 1MB. A worst case fully randomized overwrite of this file
results in ~8k extents of an average size of ~1MB. If the same
workload is interrupted a couple times for blockgc processing
(assuming the file goes idle), the resulting extent count explodes
to over 100k extents with an average size <100kB. This is
significantly worse than ideal and essentially defeats the COW
extent size hint mechanism.
While this particular test is instrumented, it reflects a fairly
reasonable pattern in practice where random I/Os might spread out
over a large period of time with varying periods of (in)activity.
For example, consider a cloned disk image file for a VM or container
with long uptime and variable and bursty usage. A background blockgc
scan that races and processes the image file when it happens to be
clean and idle can have a significant effect on the future
fragmentation level of the file, even when still in use.
To help combat this, update the heuristic to skip cowblocks inodes
that are currently opened for write access during non-sync blockgc
scans. This allows COW fork preallocations to persist for as long as
possible unless otherwise needed for functional purposes (i.e. a
sync scan), the file is idle and closed, or the inode is being
evicted from cache. While here, update the comments to help
distinguish performance oriented heuristics from the logic that
exists to maintain functional correctness.
Suggested-by: Darrick Wong <djwong@kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently the debug-only xfs_bmap_exact_minlen_extent_alloc allocation
variant fails to drop into the lowmode last resort allocator, and
thus can sometimes fail allocations for which the caller has a
transaction block reservation.
Fix this by using xfs_bmap_btalloc_low_space to do the actual allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_bmap_exact_minlen_extent_alloc duplicates the args setup in
xfs_bmap_btalloc. Switch to call it from xfs_bmap_btalloc after
doing the basic setup.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Exact minlen allocations only exist as an error injection tool for debug
builds. Currently this is implemented using ifdefs, which means the code
isn't even compiled for non-XFS_DEBUG builds. Enhance the compile test
coverage by always building the code and use the compilers' dead code
elimination to remove it from the generated binary instead.
The only downside is that the alloc_minlen_only field is unconditionally
added to struct xfs_alloc_args now, but by moving it around and packing
it tightly this doesn't actually increase the size of the structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Userdata and metadata allocations end up in the same allocation helpers.
Remove the separate xfs_bmap_alloc_userdata function to make this more
clear.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Just like xfs_attr3_leaf_split, xfs_attr_node_try_addname can return
-ENOSPC both for an actual failure to allocate a disk block, but also
to signal the caller to convert the format of the attr fork. Use magic
1 to ask for the conversion here as well.
Note that unlike the similar issue in xfs_attr3_leaf_split, this one was
only found by code review.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_attr3_leaf_split propagates the need for an extra btree split as
-ENOSPC to it's only caller, but the same return value can also be
returned from xfs_da_grow_inode when it fails to find free space.
Distinguish the two cases by returning 1 for the extra split case instead
of overloading -ENOSPC.
This can be triggered relatively easily with the pending realtime group
support and a file system with a lot of small zones that use metadata
space on the main device. In this case every about 5-10th run of
xfs/538 runs into the following assert:
ASSERT(oldblk->magic == XFS_ATTR_LEAF_MAGIC);
in xfs_attr3_leaf_split caused by an allocation failure. Note that
the allocation failure is caused by another bug that will be fixed
subsequently, but this commit at least sorts out the error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_attr3_leaf_add only has two potential return values, indicating if the
entry could be added or not. Replace the errno return with a bool so that
ENOSPC from it can't easily be confused with a real ENOSPC.
Remove the return value from the xfs_attr3_leaf_add_work helper entirely,
as it always return 0.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_attr_leaf_try_add is only called by xfs_attr_leaf_addname, and
merging the two will simplify a following error handling fix.
To facilitate this move the remote block state save/restore helpers up in
the file so that they don't need forward declarations now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Use !try_cmpxchg instead of cmpxchg (*ptr, old, new) != old in
xlog_cil_insert_pcp_aggregate(). x86 CMPXCHG instruction returns
success in ZF flag, so this change saves a compare after cmpxchg.
Also, try_cmpxchg implicitly assigns old *ptr value to "old" when
cmpxchg fails. There is no need to re-read the value in the loop.
Note that the value from *ptr should be read using READ_ONCE to
prevent the compiler from merging, refetching or reordering the read.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The definition of xfs_attr_use_log_assist() has been removed since
commit d9c61ccb3b ("xfs: move xfs_attr_use_log_assist out of xfs_log.c").
So, Remove the empty declartion in header files.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ
63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d
592+iDgLsema/H/0/CqfqlaNtDNY8Q0=
=HUl5
-----END PGP SIGNATURE-----
Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEvwAKCRCRxhvAZXjc
ohg3APwJWQnqFlBddcRl4yrPJ/cgcYSYAOdHb+E+blomSwdxcwEAmwsnLPNQOtw2
rxKvQfZqhVT437bl7RpPPZrHGxwTng8=
=6v1r
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs blocksize updates from Christian Brauner:
"This contains the vfs infrastructure as well as the xfs bits to enable
support for block sizes (bs) larger than page sizes (ps) plus a few
fixes to related infrastructure.
There has been efforts over the last 16 years to enable enable Large
Block Sizes (LBS), that is block sizes in filesystems where bs > page
size. Through these efforts we have learned that one of the main
blockers to supporting bs > ps in filesystems has been a way to
allocate pages that are at least the filesystem block size on the page
cache where bs > ps.
Thanks to various previous efforts it is possible to support bs > ps
in XFS with only a few changes in XFS itself. Most changes are to the
page cache to support minimum order folio support for the target block
size on the filesystem.
A motivation for Large Block Sizes today is to support high-capacity
(large amount of Terabytes) QLC SSDs where the internal Indirection
Unit (IU) are typically greater than 4k to help reduce DRAM and so in
turn cost and space. In practice this then allows different
architectures to use a base page size of 4k while still enabling
support for block sizes aligned to the larger IUs by relying on high
order folios on the page cache when needed.
It also allows to take advantage of the drive's support for atomics
larger than 4k with buffered IO support in Linux. As described this
year at LSFMM, supporting large atomics greater than 4k enables
databases to remove the need to rely on their own journaling, so they
can disable double buffered writes, which is a feature different cloud
providers are already enabling through custom storage solutions"
* tag 'vfs-6.12.blocksize' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
Documentation: iomap: fix a typo
iomap: remove the iomap_file_buffered_write_punch_delalloc return value
iomap: pass the iomap to the punch callback
iomap: pass flags to iomap_file_buffered_write_punch_delalloc
iomap: improve shared block detection in iomap_unshare_iter
iomap: handle a post-direct I/O invalidate race in iomap_write_delalloc_release
docs:filesystems: fix spelling and grammar mistakes in iomap design page
filemap: fix htmldoc warning for mapping_align_index()
iomap: make zero range flush conditional on unwritten mappings
iomap: fix handling of dirty folios over unwritten extents
iomap: add a private argument for iomap_file_buffered_write
iomap: remove set_memor_ro() on zero page
xfs: enable block size larger than page size support
xfs: make the calculation generic in xfs_sb_validate_fsb_count()
xfs: expose block size in stat
xfs: use kvmalloc for xattr buffers
iomap: fix iomap_dio_zero() for fs bs > system page size
filemap: cap PTE range to be created to allowed zero fill in folio_map_range()
mm: split a folio in minimum folio order chunks
readahead: allocate folios with mapping_min_order in readahead
...
* Introduce new ioctls to exchange contents of two files.
The first ioctl does the preparation work to exchange the contents of two
files while the second ioctl performs the actual exchange if the target
file has not been changed since a given sampling point.
* Fixes
- Fix bugs associated with calculating the maximum range of realtime
extents to scan for free space.
- Copy keys instead of records when resizing the incore BMBT root block.
- Do not report FITRIMming more bytes than possibly exist in the
filesystem.
- Modify xfs_fs.h to prevent C++ compilation errors.
- Do not over eagerly free post-EOF speculative preallocation.
- Ensure st_blocks never goes to zero during COW writes
* Cleanups/refactors
- Use Xarray to hold per-AG data instead of a Radix tree.
- Cleanup the following functionality,
- Realtime bitmap.
- Inode allocator.
- Quota.
- Inode rooted btree code.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZtmy/gAKCRAH7y4RirJu
9H3GAP9CnoiZu+U/QmNL5T15fgNGs+BQDrUNbmbn3bNlmIZviQEAi3p+50OlT0nP
lcQ/89NJ6uDFNBiphpkGajlp5vn2BQ0=
=7wy/
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.12-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
"New code:
- Introduce new ioctls to exchange contents of two files.
The first ioctl does the preparation work to exchange the contents
of two files while the second ioctl performs the actual exchange if
the target file has not been changed since a given sampling point.
Fixes:
- Fix bugs associated with calculating the maximum range of realtime
extents to scan for free space.
- Copy keys instead of records when resizing the incore BMBT root
block.
- Do not report FITRIMming more bytes than possibly exist in the
filesystem.
- Modify xfs_fs.h to prevent C++ compilation errors.
- Do not over eagerly free post-EOF speculative preallocation.
- Ensure st_blocks never goes to zero during COW writes
Cleanups/refactors:
- Use Xarray to hold per-AG data instead of a Radix tree.
- Cleanups to:
- realtime bitmap
- inode allocator
- quota
- inode rooted btree code"
* tag 'xfs-6.12-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (61 commits)
xfs: ensure st_blocks never goes to zero during COW writes
xfs: use xas_for_each_marked in xfs_reclaim_inodes_count
xfs: convert perag lookup to xarray
xfs: simplify tagged perag iteration
xfs: move the tagged perag lookup helpers to xfs_icache.c
xfs: use kfree_rcu_mightsleep to free the perag structures
xfs: use LIST_HEAD() to simplify code
xfs: Remove duplicate xfs_trans_priv.h header
xfs: remove unnecessary check
xfs: Use xfs set and clear mp state helpers
xfs: reclaim speculative preallocations for append only files
xfs: simplify extent lookup in xfs_can_free_eofblocks
xfs: check XFS_EOFBLOCKS_RELEASED earlier in xfs_release_eofblocks
xfs: only free posteof blocks on first close
xfs: don't free post-EOF blocks on read close
xfs: skip all of xfs_file_release when shut down
xfs: don't bother returning errors from xfs_file_release
xfs: refactor f_op->release handling
xfs: remove the i_mode check in xfs_release
xfs: standardize the btree maxrecs function parameters
...
- Core:
- Overhaul of posix-timers in preparation of removing the
workaround for periodic timers which have signal delivery
ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep
time since the large rewrite to a non-cascading wheel, but the
extra jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack
for real time tasks and enforce it at the core level instead of
having inconsistent individual checks in various timer setup
functions.
- The usual set of updates and enhancements all over the place.
- Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers
-----BEGIN PGP SIGNATURE-----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=jE0N
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
omD7AQCZuWPXkEGYFD37MJZuRXNEoq7Tuj6yd0O2b5khUpzvyAD+MPuthGiCMPsu
voPpUP83x7T0D3JsEsCAXtNeVRcIBQI=
=xTs6
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fallocate updates from Christian Brauner:
"This contains work to try and cleanup some the fallocate mode
handling. Currently, it confusingly mixes operation modes and an
optional flag.
The work here tries to better define operation modes and optional
flags allowing the core and filesystem code to use switch statements
to switch on the operation mode"
* tag 'vfs-6.12.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
xfs: refactor xfs_file_fallocate
xfs: move the xfs_is_always_cow_inode check into xfs_alloc_file_space
xfs: call xfs_flush_unmap_range from xfs_free_file_space
fs: sort out the fallocate mode vs flag mess
ext4: remove tracing for FALLOC_FL_NO_HIDE_STALE
block: remove checks for FALLOC_FL_NO_HIDE_STALE
iomap_file_buffered_write_punch_delalloc can only return errors if either
the ->punch callback returned an error, or if someone changed the API of
mapping_seek_hole_data to return a negative error code that is not
-ENXIO.
As the only instance of ->punch never returns an error, an such an error
would be fatal anyway remove the entire error propagation and don't
return an error code from iomap_file_buffered_write_punch_delalloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
XFS will need to look at the flags in the iomap structure, so pass it
down all the way to the callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
To fix short write error handling, We'll need to figure out what operation
iomap_file_buffered_write_punch_delalloc is called for. Pass the flags
argument on to it, and reorder the argument list to match that of
->iomap_end so that the compiler only has to add the new punch argument
to the end of it instead of reshuffling the registers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240910043949.3481298-4-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Take the end of a file write into consideration when deciding whether or
not to use huge pages for tmpfs files when the tmpfs filesystem is mounted
with huge=within_size
This allows large writes that append to the end of a file to automatically
use large pages.
Doing 4MB sequential writes without fallocate to a 16GB tmpfs file with
fio. The numbers without THP or with huge=always stay the same, but the
performance with huge=within_size now matches that of huge=always.
huge before after
4kB pages 1560 MB/s 1560 MB/s
within_size 1560 MB/s 4720 MB/s
always: 4720 MB/s 4720 MB/s
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20240903111928.7171e60c@imladris.surriel.com
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are several comments all over the place, which uses a wrong singular
form of jiffies.
Replace 'jiffie' by 'jiffy'. No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Link: https://lore.kernel.org/all/20240904-devel-anna-maria-b4-timers-flseep-v1-3-e98760256370@linutronix.de
The iomap zero range implementation doesn't properly handle dirty
pagecache over unwritten mappings. It skips such mappings as if they
were pre-zeroed. If some part of an unwritten mapping is dirty in
pagecache from a previous write, the data in cache should be zeroed
as well. Instead, the data is left in cache and creates a stale data
exposure problem if writeback occurs sometime after the zero range.
Most callers are unaffected by this because the higher level
filesystem contexts that call zero range typically perform a filemap
flush of the target range for other reasons. A couple contexts that
don't otherwise need to flush are write file size extension and
truncate in XFS. The former path is currently susceptible to the
stale data exposure problem and the latter performs a flush
specifically to work around it.
This is clearly inconsistent and incomplete. As a first step toward
correcting behavior, lift the XFS workaround to iomap_zero_range()
and unconditionally flush the range before the zero range operation
proceeds. While this appears to be a bit of a big hammer, most all
users already do this from calling context save for the couple of
exceptions noted above. Future patches will optimize or elide this
flush while maintaining functional correctness.
Fixes: ae259a9c85 ("fs: introduce iomap infrastructure")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20240830145634.138439-2-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In order to switch fuse over to using iomap for buffered writes we need
to be able to have the struct file for the original write, in case we
have to read in the page to make it uptodate. Handle this by using the
existing private field in the iomap_iter, and add the argument to
iomap_file_buffered_write. This will allow us to pass the file in
through the iomap buffered write path, and is flexible for any other
file systems needs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/7f55c7c32275004ba00cddf862d970e6e633f750.1724755651.git.josef@toxicpanda.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
COW writes remove the amount overwritten either directly for delalloc
reservations, or in earlier deferred transactions than adding the new
amount back in the bmap map transaction. This means st_blocks on an
inode where all data is overwritten using the COW path can temporarily
show a 0 st_blocks. This can easily be reproduced with the pending
zoned device support where all writes use this path and trips the
check in generic/615, but could also happen on a reflink file without
that.
Fix this by temporarily add the pending blocks to be mapped to
i_delayed_blks while the item is queued.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_reclaim_inodes_count iterates over all AGs to sum up the reclaimable
inodes counts. There is no point in grabbing a reference to the them or
unlock the RCU critical section for each iteration, so switch to the
more efficient xas_for_each_marked iterator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Convert the perag lookup from the legacy radix tree to the xarray,
which allows for much nicer iteration and bulk lookup semantics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Pass the old perag structure to the tagged loop helpers so that they can
grab the old agno before releasing the reference. This removes the need
to separately track the agno and the iterator macro, and thus also
obsoletes the for_each_perag_tag syntactic sugar.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The tagged perag helpers are only used in xfs_icache.c in the kernel code
and not at all in xfsprogs. Move them to xfs_icache.c in preparation for
switching to an xarray, for which I have no plan to implement the tagged
lookup functions for userspace.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Using the kfree_rcu_mightsleep is simpler and removes the need for a
rcu_head in the perag structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
./fs/xfs/libxfs/xfs_defer.c: xfs_trans_priv.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9491
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We checked that "pip" is non-NULL at the start of the if else statement
so there is no need to check again here. Delete the check.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use the set and clear mp state helpers instead of open-coding.
It is noted that in some instances calls to atomic operation set_bit() and
clear_bit() are being replaced with test_and_set_bit() and
test_and_clear_bit(), respectively, as there is no specific helpers for
set_bit() and clear_bit() only. However should be ok, as we are just
ignoring the returned value from those "test" variants.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The XFS XFS_DIFLAG_APPEND maps to the VFS S_APPEND flag, which forbids
writes that don't append at the current EOF.
But the commit originally adding XFS_DIFLAG_APPEND support (commit
a23321e766d in xfs xfs-import repository) also checked it to skip
releasing speculative preallocations, which doesn't make any sense.
Another commit (dd9f438e32 in the xfs-import repository) later extended
that flag to also report these speculation preallocations which should
not exist in getbmap.
Remove these checks as nothing XFS_DIFLAG_APPEND implies that
preallocations beyond EOF should exist, but explicitly check for
XFS_DIFLAG_APPEND in xfs_file_release to bypass the algorithm that
discard preallocations on the first close as append only files aren't
expected to be written to only once.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_can_free_eofblocks just cares if there is an extent beyond EOF.
Replace the call to xfs_bmapi_read with a xfs_iext_lookup_extent
as we've already checked that extents are read in earlier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If the XFS_EOFBLOCKS_RELEASED flag is set, we are not going to free the
eofblocks, so don't bother locking the inode or performing the checks in
xfs_can_free_eofblocks. Also switch to a test_and_set operation once
the iolock has been acquire so that only the caller that sets it actually
frees the post-EOF blocks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Certain workloads fragment files on XFS very badly, such as a software
package that creates a number of threads, each of which repeatedly run
the sequence: open a file, perform a synchronous write, and close the
file, which defeats the speculative preallocation mechanism. We work
around this problem by only deleting posteof blocks the /first/ time a
file is closed to preserve the behavior that unpacking a tarball lays
out files one after the other with no gaps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: rebased, updated comment, renamed the flag]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
When we have a workload that does open/read/close in parallel with other
allocation, the file becomes rapidly fragmented. This is due to close()
calling xfs_file_release() and removing the speculative preallocation
beyond EOF.
Add a check for a writable context to xfs_file_release to skip the
post-EOF block freeing (an the similarly pointless flushing on truncate
down).
Before:
Test 1: sync write fragmentation counts
/mnt/scratch/file.0: 919
/mnt/scratch/file.1: 916
/mnt/scratch/file.2: 919
/mnt/scratch/file.3: 920
/mnt/scratch/file.4: 920
/mnt/scratch/file.5: 921
/mnt/scratch/file.6: 916
/mnt/scratch/file.7: 918
After:
Test 1: sync write fragmentation counts
/mnt/scratch/file.0: 24
/mnt/scratch/file.1: 24
/mnt/scratch/file.2: 11
/mnt/scratch/file.3: 24
/mnt/scratch/file.4: 3
/mnt/scratch/file.5: 24
/mnt/scratch/file.6: 24
/mnt/scratch/file.7: 23
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[darrick: wordsmithing, fix commit message]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: ported to the new ->release code structure]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There is no point in trying to free post-EOF blocks when the file system
is shutdown, as it will just error out ASAP. Instead return instantly
when xfs_file_release is called on a shut down file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
While ->release returns int, the only caller ignores the return value.
As we're only doing cleanup work there isn't much of a point in
return a value to start with, so just document the situation instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently f_op->release is split in not very obvious ways. Fix that by
folding xfs_release into xfs_file_release.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
xfs_release is only called from xfs_file_release, which is wired up as
the f_op->release handler for regular files only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Instead of assuming that PAGE_SHIFT is always higher than the blocklog,
make the calculation generic so that page cache count can be calculated
correctly for LBS.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-10-kernel@pankajraghav.com
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For block size larger than page size, the unit of efficient IO is
the block size, not the page size. Leaving stat() to report
PAGE_SIZE as the block size causes test programs like fsx to issue
illegal ranges for operations that require block size alignment
(e.g. fallocate() insert range). Hence update the preferred IO size
to reflect the block size in this case.
This change is based on a patch originally from Dave Chinner.[1]
[1] https://lwn.net/ml/linux-fsdevel/20181107063127.3902-16-david@fromorbit.com/
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240822135018.1931258-9-kernel@pankajraghav.com
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pankaj Raghav reported that when filesystem block size is larger
than page size, the xattr code can use kmalloc() for high order
allocations. This triggers a useless warning in the allocator as it
is a __GFP_NOFAIL allocation here:
static inline
struct page *rmqueue(struct zone *preferred_zone,
struct zone *zone, unsigned int order,
gfp_t gfp_flags, unsigned int alloc_flags,
int migratetype)
{
struct page *page;
/*
* We most definitely don't want callers attempting to
* allocate greater than order-1 page units with __GFP_NOFAIL.
*/
>>>> WARN_ON_ONCE((gfp_flags & __GFP_NOFAIL) && (order > 1));
...
Fix this by changing all these call sites to use kvmalloc(), which
will strip the NOFAIL from the kmalloc attempt and if that fails
will do a __GFP_NOFAIL vmalloc().
This is not an issue that productions systems will see as
filesystems with block size > page size cannot be mounted by the
kernel; Pankaj is developing this functionality right now.
Reported-by: Pankaj Raghav <kernel@pankajraghav.com>
Fixes: f078d4ea82 ("xfs: convert kmem_alloc() to kmalloc()")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20240822135018.1931258-8-kernel@pankajraghav.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Besides the obvious (and desired) difference between krealloc() and
kvrealloc(), there is some inconsistency in their function signatures and
behavior:
- krealloc() frees the memory when the requested size is zero, whereas
kvrealloc() simply returns a pointer to the existing allocation.
- krealloc() behaves like kmalloc() if a NULL pointer is passed, whereas
kvrealloc() does not accept a NULL pointer at all and, if passed,
would fault instead.
- krealloc() is self-contained, whereas kvrealloc() relies on the caller
to provide the size of the previous allocation.
Inconsistent behavior throughout allocation APIs is error prone, hence
make kvrealloc() behave like krealloc(), which seems superior in all
mentioned aspects.
Besides that, implementing kvrealloc() by making use of krealloc() and
vrealloc() provides oppertunities to grow (and shrink) allocations more
efficiently. For instance, vrealloc() can be optimized to allocate and
map additional pages to grow the allocation or unmap and free unused pages
to shrink the allocation.
[dakr@kernel.org: document concurrency restrictions]
Link: https://lkml.kernel.org/r/20240725125442.4957-1-dakr@kernel.org
[dakr@kernel.org: disable KASAN when switching to vmalloc]
Link: https://lkml.kernel.org/r/20240730185049.6244-2-dakr@kernel.org
[dakr@kernel.org: properly document __GFP_ZERO behavior]
Link: https://lkml.kernel.org/r/20240730185049.6244-5-dakr@kernel.org
Link: https://lkml.kernel.org/r/20240722163111.4766-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Chandan Babu R <chandan.babu@oracle.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Standardize the parameters in xfs_{alloc,bm,ino,rmap,refcount}bt_maxrecs
so that we have consistent calling conventions. This doesn't affect the
kernel that much, but enables us to clean up userspace a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While refactoring code, I noticed that when xfs_iroot_realloc tries to
shrink a bmbt root block, it allocates a smaller new block and then
copies "records" and pointers to the new block. However, bmbt root
blocks cannot ever be leaves, which means that it's not technically
correct to copy records. We /should/ be copying keys.
Note that this has never resulted in actual memory corruption because
sizeof(bmbt_rec) == (sizeof(bmbt_key) + sizeof(bmbt_ptr)). However,
this will no longer be true when we start adding realtime rmap stuff,
so fix this now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't report FITRIMming more bytes than possibly exist in the
filesystem.
Fixes: 410e8a18f8 ("xfs: don't bother reporting blocks trimmed via FITRIM")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Several people reported C++ compilation errors due to things that C
compilers allow but C++ compilers do not. Fix both of these problems,
and hope there aren't more of these brown paper bags in 2 months when we
finally get these fixes through the process into a released xfsprogs.
NOTE: I am submitting this bugfix over the objections of a former
maintainer, who insists that we should remove this function from the
published userspace ABI instead of fixing the C++ compilation errors.
No deprecation period, no discussion, just a hard drop of an already
provided and correct C function, which would be in contravention of
Linus' rules. IOWs, removing ABI that have already shipped in a
released kernel requires a careful deprecation period, so I will let
that maintainer run that process.
Reported-by: kernel@mattwhitlock.name
Reported-by: sam@gentoo.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219203
Fixes: 233f4e12bb ("xfs: add parent pointer ioctls")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper function to load quota inodes in the case where the
dqtype and the sb quota inode fields correspond. This is true for
nearly all the iget callsites in the quota code, except for when we're
switching the group and project quota inodes. We'll need this in
subsequent patches to make the metadir handling less convoluted.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move this function out of xfs_ioctl.c to reduce the clutter in there,
and make the entire getfsmap implementation self-contained in a single
file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The order of the functions in this file has gotten a little confusing
over the years. Specifically, the two data device implementations
(bnobt and rmapbt) could be adjacent in the source code instead of split
in two by the logdev and rtdev fsmap implementations. We're about to
add more functionality to this file, so rearrange things now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Track the RT summary file size in blocks, just like the RT bitmap
file. While we have users of both units, blocks are used slightly
more often and this matches the bitmap file for consistency.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_rtbitmap_wordcount and xfs_rtsummary_wordcount are currently unused,
so remove them to simplify refactoring other rtbitmap helpers. They
can be added back or simply open coded when actually needed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add common helpers for no-op scrubbing methods.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
0 is a valid start RT extent, and with pending changes it will become
both more common and non-unique. Switch to pass a xfs_rtblock_t instead
so that we can use NULLRTBLOCK to determine if a hint was set or not.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the code to calculate the aligned allocation request from
xfs_bmap_rtalloc into a separate self-contained helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_rtallocate currently has two fallbacks, when an allocation fails:
1) drop the requested extent size alignment, if any, and retry
2) ignore the locality hint
Oddly enough it does those in order, as trying a different location
is more in line with what the user asked for, and does it in a very
unstructured way.
Lift the fallback to try to allocate without the locality hint into
xfs_rtallocate to both perform them in a more sensible order and to
clean up the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split out a helper from xfs_rtallocate that performs the actual
allocation. This keeps the scope of the xfs_rtalloc_args structure
contained, and prepares for rtgroups support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Turn the ISVALID macro defined and used inside in xfs_bmap_adjacent
that relies on implict context into a proper inline function.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There isn't much of a good reason to pass the xfs_rtalloc_rec structures
that describe extents to xfs_rtalloc_query_range as we really just want
a lower and upper bound xfs_rtxnum_t. Pass the rtxnum directly and
simply the interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Simplify the number of block number conversion helpers by removing
xfs_rtb_to_rtxrem. Any recent compiler is smart enough to eliminate
the double divisions if using separate xfs_rtb_to_rtx and
xfs_rtb_to_rtxoff calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This function tries to find a suitable free space extent starting from
a particular rtbitmap block. Some time ago, I added a clamping function
to prevent the free space scans from running off the end of the bitmap,
but I didn't quite get the logic right.
Let's say there's an allocation request with a minlen of 5 and a maxlen
of 32 and we're scanning the last rtbitmap block. If we come within 4
rtx of the end of the rt volume, maxlen will get clamped to 4. If the
next 3 rtx are free, we could have satisfied the allocation, but the
code setting partial besti/bestlen for "minlen < maxlen" will think that
we're doing a non-variable allocation and ignore it.
The root of this problem is overwriting maxlen; I should have stuffed
the results in a different variable, which would not have introduced
this bug.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The near rt allocator employs two allocation strategies -- first it
tries to allocate at exactly @start. If that fails, it will pivot back
and forth around that starting point looking for an appropriately sized
free space.
However, I clamped maxlen ages ago to prevent the exact allocation scan
from running off the end of the rt volume. This, I realize, was
excessive. If the allocation request is (say) for 32 rtx but the start
position is 5 rtx from the end of the volume, we clamp maxlen to 5. If
the exact allocation fails, we then pivot back and forth looking for 5
rtx, even though the original intent was to try to get 32 rtx.
If we then find 5 rtx when we could have gotten 32 rtx, we've not done
as well as we could have. This may be moot if the caller immediately
comes back for more space, but it might not be. Either way, we can do
better here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Before we start doing more surgery on the rt allocator, let's clean up
the exact allocator so that it doesn't change its arguments and uses the
helper introduced in the previous patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are two places in xfs_rtalloc.c where we want to make sure that a
count of rt extents is aligned with a particular prod(uct) factor. In
one spot, we actually use rounddown(), albeit unnecessarily if prod < 2.
In the other case, we open-code this rounding inefficiently by promoting
the 32-bit length value to a 64-bit value and then performing a 64-bit
division to figure out the subtraction.
Refactor this into a single helper that uses the correct types and
division method for the type, and skips the division entirely unless
prod is large enough to make a difference.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The loop conditional here is not quite correct because an rtbitmap block
can represent rtextents beyond the end of the rt volume. There's no way
that it makes sense to scan for free space beyond EOFS, so don't do it.
This overrun has been present since v2.6.0.
Also fix the type of bestlen, which was incorrectly converted.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If xfs_rtallocate_extent_block is asked for a variable-sized allocation,
it will try to return the best-sized free extent, which is apparently
the largest one that it finds starting in this rtbitmap block. It will
then trim the size of the extent as needed to align it with prod.
However, it misses one thing -- rounding down the best-fit candidate to
the required alignment could make the extent shorter than minlen. In
the case where minlen > 1, we'd rather the caller relaxed its alignment
requirements and tried again, as the allocator already supports that.
Returning a too-short extent that causes xfs_bmapi_write to return
ENOSR if there aren't enough nmaps to handle multiple new allocations,
which can then cause filesystem shutdowns.
I haven't seen this happen on any production systems, but then I don't
think it's very common to set a per-file extent size hint on realtime
files. I tripped it while working on the rtgroups feature and pounding
on the realtime allocator enthusiastically.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When growfs sets an extent size, it doesn't updated the m_rtxblklog and
m_rtxblkmask values, which could lead to incorrect usage of them if they
were set before and can't be used for the new extent size.
Add a xfs_mount_sb_set_rextsize helper that updates the two fields, and
also use it when calculating the new RT geometry instead of disabling
the optimization there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
After going great length to calculate the transaction reservation for
the new geometry, we should also use it to allocate the transaction it
was calculated for.
Fixes: 578bd4ce71 ("xfs: recompute growfsrtfree transaction reservation while growing rt volume")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
To prepare for being able to join an already locked rtbitmap inode to a
transaction split out separate helpers for joining the transaction from
the locking helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add helpers to libxfs that can be shared by growfs and mkfs for
initializing the rtbitmap and summary, and by passing the optional data
pointer also by repair for rebuilding them. This will become even more
useful when the rtgroups feature adds a metadata header to each block,
which means even more shared code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: minor documentation and data advance tweaks]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add helper to calculate the last currently used rt bitmap block to
better structure the growfs code and prepare for future changes to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a helper to contain the per-rtbitmap block logic in xfs_growfs_rt.
Note that this helper now allocates a new fake mount structure for
each rtbitmap block iteration instead of reusing the memory for an
entire growfs call. Compared to all the other work done when freeing
the blocks the overhead for this is in the noise and it keeps the code
nicely modular.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently the various low-level RT allocator functions call into
xfs_rtallocate_range directly, which ties them into the locking protocol
for the RT bitmap. As these helpers already return the allocated range,
lift the call to xfs_rtallocate_range into xfs_bmap_rtalloc so that it
happens as high as possible in the stack, which will simplify future
changes to the locking protocol.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
xfs_rtpick_extent never returns an error. Do away with the error return
and directly return the picked extent instead of doing that through a
call by reference argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a corruption check for passing an invalid block number, which is a
lot easier to understand than the xfs_bmapi_read failure later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Protect against developers passing stupid limits when refactoring the
RT code once again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
All callers pass a 0 limit to xfs_rtfind_back, so remove the argument
and hard code it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Currently the RT mount code simply ignores an allocation failure for the
rsum_cache. The code mostly works fine with it, but not having it leads
to nasty corner cases in the growfs code that we don't really handle
well. Switch to failing the mount if we can't allocate the memory, the
file system would not exactly be useful in such a constrained environment
to start with.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Split the RT geometry validation in the early mount code into a
helper than can be reused by repair (from which this code was
apparently originally stolen anyway).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: u64 return value for calc_rbmblocks]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Replace xfs_validate_rtextents with an open coded check for 0
rtextents. The name for the function implies it does a lot more
than a zero check, which is more obvious when open coded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the xfs_icreate_args object to xfs_dialloc since we can extract the
relevant mode (really just the file type) and parent inumber from there.
This simplifies the calling convention in preparation for the next
patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Match the inode number instead of the inode pointers, as the inode
pointers in the superblock will go away soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: port to my tree, make the parameter a const pointer]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Actually use the inumber validator to check the argument passed in here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
This patch introduces two more new ioctls to manage atomic updates to
file contents -- XFS_IOC_START_COMMIT and XFS_IOC_COMMIT_RANGE. The
commit mechanism here is exactly the same as what XFS_IOC_EXCHANGE_RANGE
does, but with the additional requirement that file2 cannot have changed
since some sampling point. The start-commit ioctl performs the sampling
of file attributes.
Note: This patch currently samples i_ctime during START_COMMIT and
checks that it hasn't changed during COMMIT_RANGE. This isn't entirely
safe in kernels prior to 6.12 because ctime only had coarse grained
granularity and very fast updates could collide with a COMMIT_RANGE.
With the multi-granularity ctime introduced by Jeff Layton, it's now
possible to update ctime such that this does not happen.
It is critical, then, that this patch must not be backported to any
kernel that does not support fine-grained file change timestamps.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor xfs_file_fallocate into separate helpers for each mode,
two factors for i_size handling and a single switch statement over the
supported modes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-7-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Move the xfs_is_always_cow_inode check from the caller into
xfs_alloc_file_space to prepare for refactoring of xfs_file_fallocate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-6-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Call xfs_flush_unmap_range from xfs_free_file_space so that
xfs_file_fallocate doesn't have to predict which mode will call it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240827065123.1762168-5-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If growfsrt is run on a filesystem that doesn't have a rt volume, it's
possible to change the rt extent size. If the root directory was
previously set up with an inherited extent size hint and rtinherit, it's
possible that the hint is no longer a multiple of the rt extent size.
Although the verifiers don't complain about this, xfs_repair will, so if
we detect this situation, log the root directory to clean it up. This
is still racy, but it's better than nothing.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Take the grow lock when we're expanding the realtime volume, like we do
for the other growfs calls.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the fsmap query of xfs, there is an interval missing problem:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
1: 253:16 [8..23]: per-AG metadata 0 (8..23) 16
2: 253:16 [24..39]: inode btree 0 (24..39) 16
3: 253:16 [40..47]: per-AG metadata 0 (40..47) 8
4: 253:16 [48..55]: refcount btree 0 (48..55) 8
5: 253:16 [56..103]: per-AG metadata 0 (56..103) 48
6: 253:16 [104..127]: free space 0 (104..127) 24
......
BUG:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 104 107' /mnt
[root@fedora ~]#
Normally, we should be able to get [104, 107), but we got nothing.
The problem is caused by shifting. The query for the problem-triggered
scenario is for the missing_owner interval (e.g. freespace in rmapbt/
unknown space in bnobt), which is obtained by subtraction (gap). For this
scenario, the interval is obtained by info->last. However, rec_daddr is
calculated based on the start_block recorded in key[1], which is converted
by calling XFS_BB_TO_FSBT. Then if rec_daddr does not exceed
info->next_daddr, which means keys[1].fmr_physical >> (mp)->m_blkbb_log
<= info->next_daddr, no records will be displayed. In the above example,
104 >> (mp)->m_blkbb_log = 12 and 107 >> (mp)->m_blkbb_log = 12, so the two
are reduced to 0 and the gap is ignored:
before calculate ----------------> after shifting
104(st) 107(ed) 12(st/ed)
|---------| |
sector size block size
Resolve this issue by introducing the "end_daddr" field in
xfs_getfsmap_info. This records |key[1].fmr_physical + key[1].length| at
the granularity of sector. If the current query is the last, the rec_daddr
is end_daddr to prevent missing interval problems caused by shifting. We
only need to focus on the last query, because xfs disks are internally
aligned with disk blocksize that are powers of two and minimum 512, so
there is no problem with shifting in previous queries.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 104 107' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [104..106]: free space 0 (104..106) 3
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: limit the range of end_addr correctly]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Use XFS_BUF_DADDR_NULL (instead of a magic sentinel value) to mean "this
field is null" like the rest of xfs.
Cc: wozizhi@huawei.com
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
I notice a rmap query bug in xfs_io fsmap:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
1: 253:16 [8..23]: per-AG metadata 0 (8..23) 16
2: 253:16 [24..39]: inode btree 0 (24..39) 16
3: 253:16 [40..47]: per-AG metadata 0 (40..47) 8
4: 253:16 [48..55]: refcount btree 0 (48..55) 8
5: 253:16 [56..103]: per-AG metadata 0 (56..103) 48
6: 253:16 [104..127]: free space 0 (104..127) 24
......
Bug:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
[root@fedora ~]#
Normally, we should be able to get one record, but we got nothing.
The root cause of this problem lies in the incorrect setting of rm_owner in
the rmap query. In the case of the initial query where the owner is not
set, __xfs_getfsmap_datadev() first sets info->high.rm_owner to ULLONG_MAX.
This is done to prevent any omissions when comparing rmap items. However,
if the current ag is detected to be the last one, the function sets info's
high_irec based on the provided key. If high->rm_owner is not specified, it
should continue to be set to ULLONG_MAX; otherwise, there will be issues
with interval omissions. For example, consider "start" and "end" within the
same block. If high->rm_owner == 0, it will be smaller than the founded
record in rmapbt, resulting in a query with no records. The main call stack
is as follows:
xfs_ioc_getfsmap
xfs_getfsmap
xfs_getfsmap_datadev_rmapbt
__xfs_getfsmap_datadev
info->high.rm_owner = ULLONG_MAX
if (pag->pag_agno == end_ag)
xfs_fsmap_owner_to_rmap
// set info->high.rm_owner = 0 because fmr_owner == -1ULL
dest->rm_owner = 0
// get nothing
xfs_getfsmap_datadev_rmapbt_query
The problem can be resolved by simply modify the xfs_fsmap_owner_to_rmap
function internal logic to achieve.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Don't bother reporting the number of bytes that we "trimmed" because the
underlying storage isn't required to do anything(!) and failed discard
IOs aren't reported to the caller anyway. It's not like userspace can
use the reported value for anything useful like adjusting the offset
parameter of the next call, and it's not like anyone ever wrote a
manpage about FITRIM's out parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
As a result of the factoring in commit 14dd46cf31 ("xfs: split
xfs_inobt_init_cursor"), mount started taking a long time on a
user's filesystem. For Anders, this made mount times regress from
under a second to over 15 minutes for a filesystem with only 30
million inodes in it.
Anders bisected it down to the above commit, but even then the bug
was not obvious. In this commit, over 20 calls to
xfs_inobt_init_cursor() were modified, and some we modified to call
a new function named xfs_finobt_init_cursor().
If that takes you a moment to reread those function names to see
what the rename was, then you have realised why this bug wasn't
spotted during review. And it wasn't spotted on inspection even
after the bisect pointed at this commit - a single missing "f" isn't
the easiest thing for a human eye to notice....
The result is that xfs_finobt_count_blocks() now incorrectly calls
xfs_inobt_init_cursor() so it is now walking the inobt instead of
the finobt. Hence when there are lots of allocated inodes in a
filesystem, mount takes a -long- time run because it now walks a
massive allocated inode btrees instead of the small, nearly empty
free inode btrees. It also means all the finobt space reservations
are wrong, so mount could potentially given ENOSPC on kernel
upgrade.
In hindsight, commit 14dd46cf31 should have been two commits - the
first to convert the finobt callers to the new API, the second to
modify the xfs_inobt_init_cursor() API for the inobt callers. That
would have made the bug very obvious during review.
Fixes: 14dd46cf31 ("xfs: split xfs_inobt_init_cursor")
Reported-by: Anders Blomdell <anders.blomdell@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
willy pointed out that folio_mark_dirty is the correct function to use
to mark an xfile folio dirty because it calls out to the mapping's aops
to mark it dirty. For tmpfs this likely doesn't matter much since it
currently uses nop_dirty_folio, but let's use the abstractions properly.
Reported-by: willy@infradead.org
Fixes: 6907e3c00a ("xfs: add file_{get,put}_folio")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
"KjellR" complained on IRC that an old V4 filesystem suddenly stopped
mounting after upgrading from 6.9.11 to 6.10.3, with the following splat
when trying to read the rt bitmap inode:
00000000: 49 4e 80 00 01 02 00 01 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000020: 00 00 00 00 00 00 00 00 43 d2 a9 da 21 0f d6 30 ........C...!..0
00000030: 43 d2 a9 da 21 0f d6 30 00 00 00 00 00 00 00 00 C...!..0........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 04 00 00 00 00 ................
00000060: ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
As Dave Chinner points out, this is a V1 inode with both di_onlink and
di_nlink set to 1 and di_flushiter == 0. In other words, this inode was
formatted this way by mkfs and hasn't been touched since then.
Back in the old days of xfsprogs 3.2.3, I observed that libxfs_ialloc
would set di_nlink, but if the filesystem didn't have NLINK, it would
then set di_version = 1. libxfs_iflush_int later sees the V1 inode and
copies the value of di_nlink to di_onlink without zeroing di_onlink.
Eventually this filesystem must have been upgraded to support NLINK
because 6.10 doesn't support !NLINK filesystems, which is how we tripped
over this old behavior. The filesystem doesn't have a realtime section,
so that's why the rtbitmap inode has never been touched.
Fix this by removing the di_onlink/di_nlink checking for all V1/V2
inodes because this is a muddy mess. The V3 inode handling code has
always supported NLINK and written di_onlink==0 so keep that check.
The removal of the V1 inode handling code when we dropped support for
!NLINK obscured this old behavior.
Reported-by: kjell.m.randa@gmail.com
Fixes: 40cb8613d6 ("xfs: check unused nlink fields in the ondisk inode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3 ("fs: allow per-device dax status checking for filesystems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In commit 9adf40249e, we changed the behavior of the AIL thread to
set its own task state to KILLABLE whenever the timeout value is
nonzero. Unfortunately, this missed the fact that xfsaild_push will
return 50ms (aka a longish sleep) when we reach the push target or the
AIL becomes empty, so xfsaild goes to sleep for a long period of time in
uninterruptible D state.
This results in artificially high load averages because KILLABLE
processes are UNINTERRUPTIBLE, which contributes to load average even
though the AIL is asleep waiting for someone to interrupt it. It's not
blocked on IOs or anything, but people scrap ps for processes that look
like they're stuck in D state, so restore the previous threshold.
Fixes: 9adf40249e ("xfs: AIL doesn't need manual pushing")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We want the compiler to see that fdput() on empty instance
is a no-op. The emptiness check is that file reference is NULL,
while fdput() is "fput() if FDPUT_FPUT is present in flags".
The reason why fdput() on empty instance is a no-op is something
compiler can't see - it's that we never generate instances with
NULL file reference combined with non-zero flags.
It's not that hard to deal with - the real primitives behind
fdget() et.al. are returning an unsigned long value, unpacked by (inlined)
__to_fd() into the current struct file * + int. The lower bits are
used to store flags, while the rest encodes the pointer. Linus suggested
that keeping this unsigned long around with the extractions done by inlined
accessors should generate a sane code and that turns out to be the case.
Namely, turning struct fd into a struct-wrapped unsinged long, with
fd_empty(f) => unlikely(f.word == 0)
fd_file(f) => (struct file *)(f.word & ~3)
fdput(f) => if (f.word & 1) fput(fd_file(f))
ends up with compiler doing the right thing. The cost is the patch
footprint, of course - we need to switch f.file to fd_file(f) all over
the tree, and it's not doable with simple search and replace; there are
false positives, etc.
Note that the sole member of that structure is an opaque
unsigned long - all accesses should be done via wrappers and I don't
want to use a name that would invite manual casts to file pointers,
etc. The value of that member is equal either to (unsigned long)p | flags,
p being an address of some struct file instance, or to 0 for an empty fd.
For now the new predicate (fd_empty(f)) has no users; all the
existing checks have form (!fd_file(f)). We will convert to fd_empty()
use later; here we only define it (and tell the compiler that it's
unlikely to return true).
This commit only deals with representation change; there will
be followups.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Replace a comma between expression statements by a semicolon.
Fixes: 178b48d588 ("xfs: remove the for_each_xbitmap_ helpers")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Fixes: 8f4b980ee6 ("xfs: pass the attr value to put_listent when possible")
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
In the macro definition of XFS_DQUOT_LOGRES, a parameter is accepted,
but it is not used. Hence, it should be removed.
This patch has only passed compilation test, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Since file_path() takes the output buffer as one of its arguments, we
might as well have it format directly into the tracepoint's char array
instead of wasting stack space.
Fixes: 3934e8ebb7 ("xfs: create a big array data structure")
Fixes: 5076a6040c ("xfs: support in-memory buffer cache targets")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403290419.HPcyvqZu-lkp@intel.com/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We got a report from the podman folks that selinux relabels that happen
as part of their process were returning ENOSPC when the filesystem is
completely full. This is because xattr changes reserve about 15 blocks
for the worst case, but the common case is for selinux contexts to be
the sole, in-inode xattr and consume no blocks.
We already allow reserved space consumption for XFS_ATTR_ROOT for things
such as ACLs, and SECURE namespace attributes are not so very different,
so allow them to use the reserved space as well.
Code-comment-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
V2: Remove local variable, add comment.
V3: Add Dave's preferred comment
V4: Spelling and comment beautification
kmemleak reported that we don't free the parent pointer names here if we
found corruption.
Fixes: 0d29a20fbd ("xfs: scrub parent pointers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
* Enable FITRIM on the realtime device.
* Introduce byte-based grant head log reservation tracking instead of
physical log location tracking.
This allows grant head to track a full 64 bit bytes space and hence
overcome the limit of 4GB indexing that has been present until now.
* Fixes
- xfs_flush_unmap_range() and xfs_prepare_shift() should consider RT extents
in the flush unmap range.
- Implement bounds check when traversing log operations during log replay.
- Prevent out of bounds access when traversing a directory data block.
- Prevent incorrect ENOSPC when concurrently performing file creation and
file writes.
- Fix rtalloc rotoring when delalloc is in use
* Cleanups
- Clean up I/O path inode locking helpers and the page fault handler.
- xfs: hoist inode operations to libxfs in anticipation of the metadata
inode directory feature, which maintains a directory tree of metadata
inodes. This will be necessary for further enhancements to the realtime
feature, subvolume support.
- Clean up some warts in the extent freeing log intent code.
- Clean up the refcount and rmap intent code before adding support for
realtime devices.
- Provide the correct email address for sysfs ABI documentation.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZo9pkwAKCRAH7y4RirJu
9EV+AQDBlX2AxTzKPsfb74qKaFgDpTdud8b1U779tijs4a6ZbwD8CvS40NXAjqmq
R2j3wWQP3rkRxBusnStQ/9El20Q+WAI=
=BcGP
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Chandan Babu:
"Major changes in this release are limited to enabling FITRIM on
realtime devices and Byte-based grant head log reservation tracking.
The remaining changes are limited to fixes and cleanups included in
this pull request.
Core:
- Enable FITRIM on the realtime device
- Introduce byte-based grant head log reservation tracking instead of
physical log location tracking.
This allows grant head to track a full 64 bit bytes space and hence
overcome the limit of 4GB indexing that has been present until now
Fixes:
- xfs_flush_unmap_range() and xfs_prepare_shift() should consider RT
extents in the flush unmap range
- Implement bounds check when traversing log operations during log
replay
- Prevent out of bounds access when traversing a directory data block
- Prevent incorrect ENOSPC when concurrently performing file creation
and file writes
- Fix rtalloc rotoring when delalloc is in use
Cleanups:
- Clean up I/O path inode locking helpers and the page fault handler
- xfs: hoist inode operations to libxfs in anticipation of the
metadata inode directory feature, which maintains a directory tree
of metadata inodes. This will be necessary for further enhancements
to the realtime feature, subvolume support
- Clean up some warts in the extent freeing log intent code
- Clean up the refcount and rmap intent code before adding support
for realtime devices
- Provide the correct email address for sysfs ABI documentation"
* tag 'xfs-6.11-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (80 commits)
xfs: fix rtalloc rotoring when delalloc is in use
xfs: get rid of xfs_ag_resv_rmapbt_alloc
xfs: skip flushing log items during push
xfs: grant heads track byte counts, not LSNs
xfs: pass the full grant head to accounting functions
xfs: track log space pinned by the AIL
xfs: collapse xlog_state_set_callback in caller
xfs: l_last_sync_lsn is really AIL state
xfs: ensure log tail is always up to date
xfs: background AIL push should target physical space
xfs: AIL doesn't need manual pushing
xfs: move and rename xfs_trans_committed_bulk
xfs: fix the contact address for the sysfs ABI documentation
xfs: Avoid races with cnt_btree lastrec updates
xfs: move xfs_refcount_update_defer_add to xfs_refcount_item.c
xfs: simplify usage of the rcur local variable in xfs_refcount_finish_one
xfs: don't bother calling xfs_refcount_finish_one_cleanup in xfs_refcount_finish_one
xfs: reuse xfs_refcount_update_cancel_item
xfs: add a ci_entry helper
xfs: remove xfs_trans_set_refcount_flags
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEHLQAKCRCRxhvAZXjc
ot3sAP9TBUM+vzUcQ5SVcUnSX+y3dhOGYnquORBbRc/Y6AzLMAEAu3TcsvdoaWfy
6ImUaju6iLqy9cCY3uDlNmJR16E4IgE=
=Bwpy
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"This contains some minor work for the iomap subsystem:
- Add documentation on the design of iomap and how to port to it
- Optimize iomap_read_folio()
- Bring back the change to iomap_write_end() to no increase i_size.
This is accompanied by a change to xfs to reserve blocks for
truncating large realtime inodes to avoid exposing stale data when
iomap_write_end() stops increasing i_size"
* tag 'vfs-6.11.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: don't increase i_size in iomap_write_end()
xfs: reserve blocks for truncating large realtime inode
Documentation: the design of iomap and how to port
iomap: Optimize iomap_read_folio
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZpEG2wAKCRCRxhvAZXjc
ooW/AQDzyY+xNGt4OPMvlyFUHd5RcyiLsMhYrkKc3FaIFjesVgD+PFW5PPW12c0V
Z4VHg9w1HDDuUn4XvELs7OXZpek7RgU=
=eDC8
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode / dentry updates from Christian Brauner:
"This contains smaller performance improvements to inodes and dentries:
inode:
- Add rcu based inode lookup variants.
They avoid one inode hash lock acquire in the common case thereby
significantly reducing contention. We already support RCU-based
operations but didn't take advantage of them during inode
insertion.
Callers of iget_locked() get the improvement without any code
changes. Callers that need a custom callback can switch to
iget5_locked_rcu() as e.g., did btrfs.
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Long-term we should pick up the effort to introduce more
fine-grained locking and possibly improve on the currently used
hash implementation.
- Start zeroing i_state in inode_init_always() instead of doing it in
individual filesystems.
This allows us to remove an unneeded lock acquire in new_inode()
and not burden individual filesystems with this.
dcache:
- Move d_lockref out of the area used by RCU lookup to avoid
cacheline ping poing because the embedded name is sharing a
cacheline with d_lockref.
- Fix dentry size on 32bit with CONFIG_SMP=y so it does actually end
up with 128 bytes in total"
* tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix dentry size
vfs: move d_lockref out of the area used by RCU lookup
bcachefs: remove now spurious i_state initialization
xfs: remove now spurious i_state initialization in xfs_inode_alloc
vfs: partially sanitize i_state zeroing on inode creation
xfs: preserve i_state around inode_init_always in xfs_reinit_inode
btrfs: use iget5_locked_rcu
vfs: add rcu-based find_inode variants for iget ops
If we're trying to allocate real space for a delalloc reservation at
offset 0, we should use the rotor to spread files across the rt volume.
Switch the rtalloc to use the XFS_ALLOC_INITIAL_USER_DATA flag that
is set for any write at startoff to make it match the behavior for
the main data device.
Based on a patch from Darrick J. Wong.
Fixes: 6a94b1acda ("xfs: reinstate delalloc for RT inodes (if sb_rextsize == 1)")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The pag in xfs_ag_resv_rmapbt_alloc() is already held when the struct
xfs_btree_cur is initialized in xfs_rmapbt_init_cursor(), so there is no
need to get pag again.
On the other hand, in xfs_rmapbt_free_block(), the similar function
xfs_ag_resv_rmapbt_free() was removed in commit 92a005448f ("xfs: get
rid of unnecessary xfs_perag_{get,put} pairs"), xfs_ag_resv_rmapbt_alloc()
was left because scrub used it, but now scrub has removed it. Therefore,
we could get rid of xfs_ag_resv_rmapbt_alloc() just like the rmap free
block, make the code cleaner.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The AIL pushing code spends a huge amount of time skipping over
items that are already marked as flushing. It is not uncommon to
see hundreds of thousands of items skipped every second due to inode
clustering marking all the inodes in a cluster as flushing when the
first one is flushed.
However, to discover an item is already flushing and should be
skipped we have to call the iop_push() method for it to try to flush
the item. For inodes (where this matters most), we have to first
check that inode is flushable first.
We can optimise this overhead away by tracking whether the log item
is flushing internally. This allows xfsaild_push() to check the log
item directly for flushing state and immediately skip the log item.
Whilst this doesn't remove the CPU cache misses for loading the log
item, it does avoid the overhead of an indirect function call
and the cache misses involved in accessing inode and
backing cluster buffer structures to determine flushing state. When
trying to flush hundreds of thousands of inodes each second, this
CPU overhead saving adds up quickly.
It's so noticeable that the biggest issue with pushing on the AIL on
fast storage becomes the 10ms back-off wait when we hit enough
pinned buffers to break out of the push loop but not enough for the
AIL pushing to be considered stuck. This limits the xfsaild to about
70% total CPU usage, and on fast storage this isn't enough to keep
the storage 100% busy.
The xfsaild will block on IO submission on slow storage and so is
self throttling - it does not need a backoff in the case where we
are really just breaking out of the walk to submit the IO we have
gathered.
Further with no backoff we don't need to gather huge delwri lists to
mitigate the impact of backoffs, so we can submit IO more frequently
and reduce the time log items spend in flushing state by breaking
out of the item push loop once we've gathered enough IO to batch
submission effectively.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The grant heads in the log track the space reserved in the log for
running transactions. They do this by tracking how far ahead of the
tail that the reservation has reached, and the units for doing this
are {cycle,bytes} for the reserve head rather than {cycle,blocks}
which are normal used by LSNs.
This is annoyingly complex because we have to split, crack and
combined these tuples for any calculation we do to determine log
space and targets. This is computationally expensive as well as
difficult to do atomically and locklessly, as well as limiting the
size of the log to 2^32 bytes.
Really, though, all the grant heads are tracking is how much space
is currently available for use in the log. We can track this as a
simply byte count - we just don't care what the actual physical
location in the log the head and tail are at, just how much space we
have remaining before the head and tail overlap.
So, convert the grant heads to track the byte reservations that are
active rather than the current (cycle, offset) tuples. This means an
empty log has zero bytes consumed, and a full log is when the
reservations reach the size of the log minus the space consumed by
the AIL.
This greatly simplifies the accounting and checks for whether there
is space available. We no longer need to crack or combine LSNs to
determine how much space the log has left, nor do we need to look at
the head or tail of the log to determine how close to full we are.
There is, however, a complexity that needs to be handled. We know
how much space is being tracked in the AIL now via log->l_tail_space
and the log tickets track active reservations and return the unused
portions to the grant heads when ungranted. Unfortunately, we don't
track the used portion of the grant, so when we transfer log items
from the CIL to the AIL, the space accounted to the grant heads is
transferred to the log tail space. Hence when we move the AIL head
forwards on item insert, we have to remove that space from the grant
heads.
We also remove the xlog_verify_grant_tail() debug function as it is
no longer useful. The check it performs has been racy since delayed
logging was introduced, but now it is clearly only detecting false
positives so remove it.
The result of this substantially simpler accounting algorithm is an
increase in sustained transaction rate from ~1.3 million
transactions/s to ~1.9 million transactions/s with no increase in
CPU usage. We also remove the 32 bit space limitation on the grant
heads, which will allow us to increase the journal size beyond 2GB
in future.
Note that this renames the sysfs files exposing the log grant space
now that the values are exported in bytes. This allows xfstests
to auto-detect the old or new ABI.
[hch: move xlog_grant_sub_space out of line,
update the xlog_grant_{add,sub}_space prototypes,
rename the sysfs files to allow auto-detection in xfstests]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Because we are going to need them soon. API change only, no logic
changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently we track space used in the log by grant heads.
These store the reserved space as a physical log location and
combine both space reserved for future use with space already used in
the log in a single variable. The amount of space consumed in the
log is then calculated as the distance between the log tail and
the grant head.
The problem with tracking the grant head as a physical location
comes from the fact that it tracks both log cycle count and offset
into the log in bytes in a single 64 bit variable. because the cycle
count on disk is a 32 bit number, this also limits the offset into
the log to 32 bits. ANd because that is in bytes, we are limited to
being able to track only 2GB of log space in the grant head.
Hence to support larger physical logs, we need to track used space
differently in the grant head. We no longer use the grant head for
guiding AIL pushing, so the only thing it is now used for is
determining if we've run out of reservation space via the
calculation in xlog_space_left().
What we really need to do is move the grant heads away from tracking
physical space in the log. The issue here is that space consumed in
the log is not directly tracked by the current mechanism - the
space consumed in the log by grant head reservations gets returned
to the free pool by the tail of the log moving forward. i.e. the
space isn't directly tracked or calculated, but the used grant space
gets "freed" as the physical limits of the log are updated without
actually needing to update the grant heads.
Hence to move away from implicit, zero-update log space tracking we
need to explicitly track the amount of physical space the log
actually consumes separately to the in-memory reservations for
operations that will be committed to the journal. Luckily, we
already track the information we need to calculate this in the AIL
itself.
That is, the space currently consumed by the journal is the maximum
LSN that the AIL has seen minus the current log tail. As we update
both of these items dynamically as the head and tail of the log
moves, we always know exactly how much space the journal consumes.
This means that we also know exactly how much space the currently
active reservations require, and exactly how much free space we have
remaining for new reservations to be made. Most importantly, we know
what these spaces are indepedently of the physical locations of
the head and tail of the log.
Hence by separating out the physical space consumed by the journal,
we can now track reservations in the grant heads purely as a byte
count, and the log can be considered full when the tail space +
reservation space exceeds the size of the log. This means we can use
the full 64 bits of grant head space for reservation space,
completely removing the 32 bit byte count limitation on log size
that they impose.
Hence the first step in this conversion is to track and update the
"log tail space" every time the AIL tail or maximum seen LSN
changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The function is called from a single place, and it isn't just
setting the iclog state to XLOG_STATE_CALLBACK - it can mark iclogs
clean, which moves them to states after CALLBACK. Hence the function
is now badly named, and should just be folded into the caller where
the iclog completion logic makes a whole lot more sense.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The current implementation of xlog_assign_tail_lsn() assumes that
when the AIL is empty, the log tail matches the LSN of the last
written commit record. This is recorded in xlog_state_set_callback()
as log->l_last_sync_lsn when the iclog state changes to
XLOG_STATE_CALLBACK. This change is then immediately followed by
running the callbacks on the iclog which then insert the log items
into the AIL at the "commit lsn" of that checkpoint.
The AIL tracks log items via the start record LSN of the checkpoint,
not the commit record LSN. This is because we can pipeline multiple
checkpoints, and so the start record of checkpoint N+1 can be
written before the commit record of checkpoint N. i.e:
start N commit N
+-------------+------------+----------------+
start N+1 commit N+1
The tail of the log cannot be moved to the LSN of commit N when all
the items of that checkpoint are written back, because then the
start record for N+1 is no longer in the active portion of the log
and recovery will fail/corrupt the filesystem.
Hence when all the log items in checkpoint N are written back, the
tail of the log most now only move as far forwards as the start LSN
of checkpoint N+1.
Hence we cannot use the maximum start record LSN the AIL sees as a
replacement the pointer to the current head of the on-disk log
records. However, we currently only use the l_last_sync_lsn when the
AIL is empty - when there is no start LSN remaining, the tail of the
log moves to the LSN of the last commit record as this is where
recovery needs to start searching for recoverable records. THe next
checkpoint will have a start record LSN that is higher than
l_last_sync_lsn, and so everything still works correctly when new
checkpoints are written to an otherwise empty log.
l_last_sync_lsn is an atomic variable because it is currently
updated when an iclog with callbacks attached moves to the CALLBACK
state. While we hold the icloglock at this point, we don't hold the
AIL lock. When we assign the log tail, we hold the AIL lock, not the
icloglock because we have to look up the AIL. Hence it is an atomic
variable so it's not bound to a specific lock context.
However, the iclog callbacks are only used for CIL checkpoints. We
don't use callbacks with unmount record writes, so the
l_last_sync_lsn variable only gets updated when we are processing
CIL checkpoint callbacks. And those callbacks run under AIL lock
contexts, not icloglock context. The CIL checkpoint already knows
what the LSN of the iclog the commit record was written to (obtained
when written into the iclog before submission) and so we can update
the l_last_sync_lsn under the AIL lock in this callback. No other
iclog callbacks will run until the currently executing one
completes, and hence we can update the l_last_sync_lsn under the AIL
lock safely.
This means l_last_sync_lsn can move to the AIL as the "ail_head_lsn"
and it can be used to replace the atomic l_last_sync_lsn in the
iclog code. This makes tracking the log tail belong entirely to the
AIL, rather than being smeared across log, iclog and AIL state and
locking.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Whenever we write an iclog, we call xlog_assign_tail_lsn() to update
the current tail before we write it into the iclog header. This
means we have to take the AIL lock on every iclog write just to
check if the tail of the log has moved.
This doesn't avoid races with log tail updates - the log tail could
move immediately after we assign the tail to the iclog header and
hence by the time the iclog reaches stable storage the tail LSN has
moved forward in memory. Hence the log tail LSN in the iclog header
is really just a point in time snapshot of the current state of the
AIL.
With this in mind, if we simply update the in memory log->l_tail_lsn
every time it changes in the AIL, there is no need to update the in
memory value when we are writing it into an iclog - it will already
be up-to-date in memory and checking the AIL again will not change
this. Hence xlog_state_release_iclog() does not need to check the
AIL to update the tail lsn and can just sample it directly without
needing to take the AIL lock.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently the AIL attempts to keep 25% of the "log space" free,
where the current used space is tracked by the reserve grant head.
That is, it tracks both physical space used plus the amount reserved
by transactions in progress.
When we start tail pushing, we are trying to make space for new
reservations by writing back older metadata and the log is generally
physically full of dirty metadata, and reservations for modifications
in flight take up whatever space the AIL can physically free up.
Hence we don't really need to take into account the reservation
space that has been used - we just need to keep the log tail moving
as fast as we can to free up space for more reservations to be made.
We know exactly how much physical space the journal is consuming in
the AIL (i.e. max LSN - min LSN) so we can base push thresholds
directly on this state rather than have to look at grant head
reservations to determine how much to physically push out of the
log.
This also allows code that needs to know if log items in the current
transaction need to be pushed or re-logged to simply sample the
current target - they don't need to calculate the current target
themselves. This avoids the need for any locking when doing such
checks.
Further, moving to a physical target means we don't need "push all
until empty semantics" like were introduced in the previous patch.
We can now test and clear the "push all" as a one-shot command to
set the target to the current head of the AIL. This allows the
xfsaild to maximise the use of log space right up to the point where
conditions indicate that the xfsaild is not keeping up with load and
it needs to work harder, and as soon as those constraints go away
(i.e. external code no longer needs everything pushed) the xfsaild
will return to maintaining the normal 25% free space thresholds.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
We have a mechanism that checks the amount of log space remaining
available every time we make a transaction reservation. If the
amount of space is below a threshold (25% free) we push on the AIL
to tell it to do more work. To do this, we end up calculating the
LSN that the AIL needs to push to on every reservation and updating
the push target for the AIL with that new target LSN.
This is silly and expensive. The AIL is perfectly capable of
calculating the push target itself, and it will always be running
when the AIL contains objects.
What the target does is determine if the AIL needs to do
any work before it goes back to sleep. If we haven't run out of
reservation space or memory (or some other push all trigger), it
will simply go back to sleep for a while if there is more than 25%
of the journal space free without doing anything.
If there are items in the AIL at a lower LSN than the target, it
will try to push up to the target or to the point of getting stuck
before going back to sleep and trying again soon after.`
Hence we can modify the AIL to calculate it's own 25% push target
before it starts a push using the same reserve grant head based
calculation as is currently used, and remove all the places where we
ask the AIL to push to a new 25% free target. We can also drop the
minimum free space size of 256BBs from the calculation because the
25% of a minimum sized log is *always going to be larger than
256BBs.
This does still require a manual push in certain circumstances.
These circumstances arise when the AIL is not full, but the
reservation grants consume the entire of the free space in the log.
In this case, we still need to push on the AIL to free up space, so
when we hit this condition (i.e. reservation going to sleep to wait
on log space) we do a single push to tell the AIL it should empty
itself. This will keep the AIL moving as new reservations come in
and want more space, rather than keep queuing them and having to
push the AIL repeatedly.
The reason for using the "push all" when grant space runs out is
that we can run out of grant space when there is more than 25% of
the log free. Small logs are notorious for this, and we have a hack
in the log callback code (xlog_state_set_callback()) where we push
the AIL because the *head* moved) to ensure that we kick the AIL
when we consume space in it because that can push us over the "less
than 25% available" available that starts tail pushing back up
again.
Hence when we run out of grant space and are going to sleep, we have
to consider that the grant space may be consuming almost all the log
space and there is almost nothing in the AIL. In this situation, the
AIL pins the tail and moving the tail forwards is the only way the
grant space will come available, so we have to force the AIL to push
everything to guarantee grant space will eventually be returned.
Hence triggering a "push all" just before sleeping removes all the
nasty corner cases we have in other parts of the code that work
around the "we didn't ask the AIL to push enough to free grant
space" condition that leads to log space hangs...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Ever since the CIL and delayed logging was introduced,
xfs_trans_committed_bulk() has been a purely CIL checkpoint
completion function and not a transaction commit completion
function. Now that we are adding log specific updates to this
function, it really does not have anything to do with the
transaction subsystem - it is really log and log item level
functionality.
This should be part of the CIL code as it is the callback
that moves log items from the CIL checkpoint to the AIL. Move it
and rename it to xlog_cil_ail_insert().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
A concurrent file creation and little writing could unexpectedly return
-ENOSPC error since there is a race window that the allocator could get
the wrong agf->agf_longest.
Write file process steps:
1) Find the entry that best meets the conditions, then calculate the start
address and length of the remaining part of the entry after allocation.
2) Delete this entry and update the -current- agf->agf_longest.
3) Insert the remaining unused parts of this entry based on the
calculations in 1), and update the agf->agf_longest again if necessary.
Create file process steps:
1) Check whether there are free inodes in the inode chunk.
2) If there is no free inode, check whether there has space for creating
inode chunks, perform the no-lock judgment first.
3) If the judgment succeeds, the judgment is performed again with agf lock
held. Otherwire, an error is returned directly.
If the write process is in step 2) but not go to 3) yet, the create file
process goes to 2) at this time, it may be mistaken for no space,
resulting in the file system still has space but the file creation fails.
We have sent two different commits to the community in order to fix this
problem[1][2]. Unfortunately, both solutions have flaws. In [2], I
discussed with Dave and Darrick, realized that a better solution to this
problem requires the "last cnt record tracking" to be ripped out of the
generic btree code. And surprisingly, Dave directly provided his fix code.
This patch includes appropriate modifications based on his tmp-code to
address this issue.
The entire fix can be roughly divided into two parts:
1) Delete the code related to lastrec-update in the generic btree code.
2) Place the process of updating longest freespace with cntbt separately
to the end of the cntbt modifications. Move the cursor to the rightmost
firstly, and update the longest free extent based on the record.
Note that we can not update the longest with xfs_alloc_get_rec() after
find the longest record, as xfs_verify_agbno() may not pass because
pag->block_count is updated on the outside. Therefore, use
xfs_btree_get_rec() as a replacement.
[1] https://lore.kernel.org/all/20240419061848.1032366-2-yebin10@huawei.com
[2] https://lore.kernel.org/all/20240604071121.3981686-1-wozizhi@huawei.com
Reported by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the code that adds the incore xfs_refcount_update_item deferred
work data to a transaction live with the CUI log item code. This means
that the refcount code no longer has to know about the inner workings of
the CUI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only update rcur when we know the final *pcur value.
Inspired-by: Christoph Hellwig <hch@lst.de>
[djwong: don't leave the caller with a dangling ref]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_refcount_finish_one we know the cursor is non-zero when calling
xfs_refcount_finish_one_cleanup and we pass a 0 error variable. This
means xfs_refcount_finish_one_cleanup is just doing a
xfs_btree_del_cursor.
Open code that and move xfs_refcount_finish_one_cleanup to
fs/xfs/xfs_refcount_item.c.
Inspired-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reuse xfs_refcount_update_cancel_item to put the AG/RTG and free the
item in a few places that currently open code the logic.
Inspired-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add a helper to translate from the item list head to the
refcount_intent_item structure and use it so shorten assignments and
avoid the need for extra local variables.
Inspired-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore refcount intent structure to the tracepoints instead of
open-coding the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rest of refcount btree tracepoints for use with realtime
reflink by making them take the btree cursor object as a parameter.
This will save us a lot of trouble later on.
Remove the xfs_refcount_recover_extent tracepoint since it's already
covered by other refcount tracepoints.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only user of the "ag" tracepoint event classes is the refcount
btree, so rename them to make that obvious and make them take the btree
cursor to simplify the arguments. This will save us a lot of trouble
later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Convert all the refcount tracepoints to use the btree error tracepoint
class.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that adds the incore xfs_rmap_update_item deferred work
data to a transaction to live with the RUI log item code. This means
that the rmap code no longer has to know about the inner workings of the
RUI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Only update rcur when we know the final *pcur value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djwong: don't leave the caller with a dangling ref]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
In xfs_rmap_finish_one we known the cursor is non-zero when calling
xfs_rmap_finish_one_cleanup and we pass a 0 error variable. This means
xfs_rmap_finish_one_cleanup is just doing a xfs_btree_del_cursor.
Open code that and move xfs_rmap_finish_one_cleanup to
fs/xfs/xfs_rmap_item.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
[djwong: minor porting changes]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reuse xfs_rmap_update_cancel_item to put the AG/RTG and free the item in
a few places that currently open code the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a helper to translate from the item list head to the
rmap_intent_item structure and use it so shorten assignments
and avoid the need for extra local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pass the incore rmap structure to the tracepoints instead of open-coding
the argument passing.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Prepare the rmap btree tracepoints for use with realtime rmap btrees by
making them take the btree cursor object as a parameter. This will save
us a lot of trouble later on.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new tracepoint class for btree-related errors, then convert all
the rmap tracepoints to use it. Also fix the one tracepoint that was
abusing the old class by making it a separate tracepoint.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that adds the incore xfs_extent_free_item deferred work
data to a transaction to live with the EFI log item code. This means
that the allocator code no longer has to know about the inner workings
of the EFI log items.
As a consequence, we can get rid of the _{get,put}_group helpers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs_free_extent_later can handle the extra AGFL special casing with
very little extra logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The bno/len verification is already done by the calls to
xfs_verify_rtbext / xfs_verify_fsbext, and reporting a corruption error
seem like the better handling than tripping an assert anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Factor out a helper to add an extent to and EFD instead of duplicating
the logic in two places.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reuse xfs_extent_free_cancel_item to put the AG/RTG and free the item in
a few places that currently open code the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Add a helper to translate from the item list head to the
xfs_extent_free_item structure and use it so shorten assignments
and avoid the need for extra local variables.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
All callers of xfs_perag_intent_get have a fsbno and need boilerplate
code to turn that into an agno. Just pass the fsbno to
xfs_perag_intent_get and look up the agno there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Convert the boolean to skip discard on free into a proper flags field so
that we can add more flags in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pass the incore EFI structure to the tracepoints instead of open-coding
the argument passing. This cleans up the call sites a bit.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently, the XFS_SB_CRC_OFF macro uses the incore superblock struct
(xfs_sb) to compute the address of sb_crc within the ondisk superblock
struct (xfs_dsb). This is a landmine if we ever change the layout of
the incore superblock (as we're about to do), so redefine the macro
to use xfs_dsb to compute the layout of xfs_dsb.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Get rid of the largely pointless xfs_cross_rename and xfs_finish_rename
now that we've refactored its parent.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the directory entry update hook code to xfs_dir2 so that it is
mostly consolidated with the higher level directory functions. Retain
the exports so that online fsck can still send notifications through the
hooks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to rename two directory entries. The
upcoming metadata directory feature will need this to replace a metadata
inode directory entry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to exchange two directory entries.
The upcoming metadata directory feature will need this to replace a
metadata inode directory entry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to remove a (name, inode) entry from a
directory. The upcoming metadata directory feature will need this to
create a metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a libxfs helper function that marks an inode free on disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to link an existing inode into a directory.
The upcoming metadata directory feature will need this to create a
metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new libxfs function to link a newly created inode into a
directory. The upcoming metadata directory feature will need this to
create a metadata directory tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
INIT_XATTRS is overloaded here -- it's set during the creat process when
we think that we're immediately going to set some ACL xattrs to save
time. However, it's also used by the parent pointers code to enable the
attr fork in preparation to receive ppptr xattrs. This results in
xfs_has_parent() branches scattered around the codebase to turn on
INIT_XATTRS.
Linkable files are created far more commonly than unlinkable temporary
files or directory tree roots, so we should centralize this logic in
xfs_inode_init. For the three callers that don't want parent pointers
(online repiar tempfiles, unlinkable tempfiles, rootdir creation) we
provide an UNLINKABLE flag to skip attr fork initialization.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper that calls dqalloc to allocate and grab a reference to
dquots for the user, group, and project ids listed in an icreate
structure. This simplifies the creat-related dqalloc callsites
scattered around the code base.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the initialization of the xfs_icreate_args structure out of
xfs_create and xfs_create_tempfile into their callers so that we can set
the new inode's attributes in one place and pass that through instead of
open coding the collection of attributes all over the code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move all the code that initializes a new inode's attributes from the
icreate_args structure and the parent directory into libxfs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There are two parts to initializing a newly allocated inode: setting up
the incore structures, and initializing the new inode core based on the
parent inode and the current user's environment. The initialization
code is not specific to the kernel, so we would like to share that with
userspace by hoisting it to libxfs. Therefore, split xfs_icreate into
separate functions to prepare for the next few patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Use xfs_trans_ichgtime to set the inode times when allocating an inode,
instead of open-coding them here.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Enable xfs_trans_ichgtime to change the inode access time so that we can
use this function to set inode times when allocating inodes instead of
open-coding it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Callers that want to create an inode currently pass all possible file
attribute values for the new inode into xfs_init_new_inode as ten
separate parameters. This causes two code maintenance issues: first, we
have large multi-line call sites which programmers must read carefully
to make sure they did not accidentally invert a value. Second, all
three file id parameters must be passed separately to the quota
functions; any discrepancy results in quota count errors.
Clean this up by creating a new icreate_args structure to hold all this
information, some helpers to initialize them properly, and make the
callers pass this structure through to the creation function, whose name
we shorten to xfs_icreate. This eliminates the issues, enables us to
keep the inode init code in sync with userspace via libxfs, and is
needed for future metadata directory tree management.
(A subsequent cleanup will also fix the quota alloc calls.)
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the inode flag conversion functions into libxfs so that we can
keep them in sync. Do this by creating a new xfs_inode_util.c file in
libxfs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the extent size helpers to xfs_bmap.c in libxfs since they're used
there already.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move these inode predicate functions to xfs_inode.[ch] since they're not
reflink functions.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
I noticed that callers of xfs_qm_vop_dqalloc use the following code to
compute the anticipated uid of the new file:
mapped_fsuid(idmap, &init_user_ns);
whereas the VFS uses a slightly different computation for actually
assigning i_uid:
mapped_fsuid(idmap, i_user_ns(inode));
Technically, these are not the same things. According to Christian
Brauner, the only time that inode->i_sb->s_user_ns != &init_user_ns is
when the filesystem was mounted in a new mount namespace by an
unpriviledged user. XFS does not allow this, which is why we've never
seen bug reports about quotas being incorrect or the uid checks in
xfs_qm_vop_create_dqattach tripping debug assertions.
However, this /is/ a logic bomb, so let's make the code consistent.
Link: https://lore.kernel.org/linux-fsdevel/20240617-weitblick-gefertigt-4a41f37119fa@brauner/
Fixes: c14329d39f ("fs: port fs{g,u}id helpers to mnt_idmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
generic/388 has an annoying tendency to fail like this during log
recovery:
XFS (sda4): Unmounting Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Mounting V5 Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Starting recovery (logdev: internal)
00000000: 49 4e 81 b6 03 02 00 00 00 00 00 07 00 00 00 07 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 ................
00000020: 35 9a 8b c1 3e 6e 81 00 35 9a 8b c1 3f dc b7 00 5...>n..5...?...
00000030: 35 9a 8b c1 3f dc b7 00 00 00 00 00 00 3c 86 4f 5...?........<.O
00000040: 00 00 00 00 00 00 02 f3 00 00 00 00 00 00 00 00 ................
00000050: 00 00 1f 01 00 00 00 00 00 00 00 02 b2 74 c9 0b .............t..
00000060: ff ff ff ff d7 45 73 10 00 00 00 00 00 00 00 2d .....Es........-
00000070: 00 00 07 92 00 01 fe 30 00 00 00 00 00 00 00 1a .......0........
00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000090: 35 9a 8b c1 3b 55 0c 00 00 00 00 00 04 27 b2 d1 5...;U.......'..
000000a0: 43 5f e3 9b 82 b6 46 ef be 56 81 94 99 58 51 30 C_....F..V...XQ0
XFS (sda4): Internal error Bad dinode after recovery at line 539 of file fs/xfs/xfs_inode_item_recover.c. Caller xlog_recover_items_pass2+0x4e/0xc0 [xfs]
CPU: 0 PID: 2189311 Comm: mount Not tainted 6.9.0-rc4-djwx #rc4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
xfs_corruption_error+0x90/0xa0
xlog_recover_inode_commit_pass2+0x5f1/0xb00
xlog_recover_items_pass2+0x4e/0xc0
xlog_recover_commit_trans+0x2db/0x350
xlog_recovery_process_trans+0xab/0xe0
xlog_recover_process_data+0xa7/0x130
xlog_do_recovery_pass+0x398/0x840
xlog_do_log_recovery+0x62/0xc0
xlog_do_recover+0x34/0x1d0
xlog_recover+0xe9/0x1a0
xfs_log_mount+0xff/0x260
xfs_mountfs+0x5d9/0xb60
xfs_fs_fill_super+0x76b/0xa30
get_tree_bdev+0x124/0x1d0
vfs_get_tree+0x17/0xa0
path_mount+0x72b/0xa90
__x64_sys_mount+0x112/0x150
do_syscall_64+0x49/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
XFS (sda4): Corruption detected. Unmount and run xfs_repair
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0x739/0x920 [xfs], inode 0x427b2d1
XFS (sda4): Filesystem has been shut down due to log error (0x2).
XFS (sda4): Please unmount the filesystem and rectify the problem(s).
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed
This inode log item recovery failing the dinode verifier after
replaying the contents of the inode log item into the ondisk inode.
Looking back into what the kernel was doing at the time of the fs
shutdown, a thread was in the middle of running a series of
transactions, each of which committed changes to the inode.
At some point in the middle of that chain, an invalid (at least
according to the verifier) change was committed. Had the filesystem not
shut down in the middle of the chain, a subsequent transaction would
have corrected the invalid state and nobody would have noticed. But
that's not what happened here. Instead, the invalid inode state was
committed to the ondisk log, so log recovery tripped over it.
The actual defect here was an overzealous inode verifier, which was
fixed in a separate patch. This patch adds some transaction precommit
functions for CONFIG_XFS_DEBUG=y mode so that we can detect these kinds
of transient errors at transaction commit time, where it's much easier
to find the root cause.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Implement FITRIM for the realtime device by pretending that it's
"space" immediately after the data device. We have to hold the
rtbitmap ILOCK while the discard operations are ongoing because there's
no busy extent tracking for the rt volume to prevent reallocations.
Cc: Konst Mayer <cdlscpmv@gmail.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Following warning is reported, so remove these duplicated header
including:
./fs/xfs/libxfs/xfs_trans_resv.c: xfs_da_format.h is included more than once.
./fs/xfs/scrub/quota_repair.c: xfs_format.h is included more than once.
./fs/xfs/xfs_handle.c: xfs_da_btree.h is included more than once.
./fs/xfs/xfs_qm_bhv.c: xfs_mount.h is included more than once.
./fs/xfs/xfs_trace.c: xfs_bmap.h is included more than once.
This is just a clean code, no logic changed.
Signed-off-by: Wenchao Hao <haowenchao22@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Now that the page fault handler has been refactored, the only caller
of xfs_ilock_for_write_fault is simple enough and calls it
unconditionally. Fold the logic and expand the comments explaining it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
After the previous refactoring, xfs_dax_fault is now never used for write
faults, so don't bother with the xfs_ilock_for_write_fault logic to
protect against writes when remapping is in progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Split the write fault and DAX fault handling into separate helpers
so that the main fault handler is easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Replace the separate stub with an IS_ENABLED check, and take the call to
dax_finish_sync_fault into xfs_dax_fault instead of leaving it in the
caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Move the relock path out of the straight line and add a comment
explaining why it exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
About half of xfs_ilock_for_iomap deals with a special case for direct
I/O writes to COW files that need to take the ilock exclusively. Move
this code into the one callers that cares and simplify
xfs_ilock_for_iomap.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
There is a lack of verification of the space occupied by fixed members
of xlog_op_header in the xlog_recover_process_data.
We can create a crafted image to trigger an out of bounds read by
following these steps:
1) Mount an image of xfs, and do some file operations to leave records
2) Before umounting, copy the image for subsequent steps to simulate
abnormal exit. Because umount will ensure that tail_blk and
head_blk are the same, which will result in the inability to enter
xlog_recover_process_data
3) Write a tool to parse and modify the copied image in step 2
4) Make the end of the xlog_op_header entries only 1 byte away from
xlog_rec_header->h_size
5) xlog_rec_header->h_num_logops++
6) Modify xlog_rec_header->h_crc
Fix:
Add a check to make sure there is sufficient space to access fixed members
of xlog_op_header.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
The RT extent range must be considered in the xfs_flush_unmap_range() call
to stabilize the boundary.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Currently xfs_flush_unmap_range() does unmap for a full RT extent range,
which we also want to ensure is clean and idle.
This code change is originally from Dave Chinner.
Reviewed-by: Christoph Hellwig <hch@lst.de>4
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
