The demodulator supports symbol rates as low as 100Ksyms/s - the demod
setup in start() already handles such low symbol rates and reviewers
of stv0910 equipped cards even found and tested transponders with
SRs in that range. So, announce this in the fe_ops.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Cc: Richard Scobie <r.scobie@clear.net.nz>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The buffer mode of the cxd2099 driver requires more work regarding error
handling and thus can cause issues in some cases, so disable it by default
and make that mode of operation controllable by users via a module
parameter (ie. 'modprobe cxd2099 buffermode=1' enables current behaviour).
The upstream codebase also has the buffer mode disabled by default, so
we should match this (but users still can test things out using the
modparm).
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix several
drivers/media/pci/ddbridge/ddbridge-core.c: warning: symbol ... was not declared. Should it be static?
drivers/media/pci/ddbridge/ddbridge-core.c: warning: Using plain integer as NULL pointer
drivers/media/pci/ddbridge/ddbridge-io.h: warning: cast removes address space of expression
drivers/media/pci/ddbridge/ddbridge-io.h: warning: incorrect type in argument 1 (different address spaces)
at multiple places.
Cc: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Brought to attention by Matthias Schwarzott <zzam@gentoo.org> by fixing
possible use-after-free faults in some demod drivers:
In ddb_input_detach(), the i2c_client is unregistered and removed before
dvb frontends are unregistered and detached. While no use-after-free issue
was observed so far, there is another issue with this:
dvb->attached keeps track of the state of the input/output registration,
and the i2c_client unregistration takes place only if everything was
successful (dvb->attached == 0x31). If for some reason an error occurred
during the frontend setup, that value stays at 0x20. In the following
error handling and cleanup, ddb_input_detach() will skip down to that
state, leaving the i2c_client registered, causing refcount issues.
Fix this by moving the i2c_client deregistration down to case 0x20.
Cc: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Whenever write_reg() fails to open/close the demod's I2C gate, release the
lock to avoid deadlocking situations. If I2c gate open failed, there's no
need to hold a lock, and if close fails, the mutex_unlock() at the end of
the function is never reached, leaving the mutex_lock in locked state,
which in turn will cause potential for deadlocks. Thus, release the lock
on failure.
While we're touching gate_ctrl(), add some explanation about the need for
locking and the shared I2C bus/gate.
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Calling i2c_unregister_device for a demod driver destroys the frontend object.
Later it is accessed by calling dvb_unregister_frontend and
dvb_frontend_detach.
In some cases this leads to a general protection fault with this
callstack:
dvb_unregister_frontend+0x25/0x50 [dvb_core]
dvb_fini+0xdb/0x160 [cx231xx_dvb]
cx231xx_unregister_extension+0x3d/0xb0 [cx231xx]
cx231xx_dvb_unregister+0x10/0x809 [cx231xx_dvb]
SyS_delete_module+0x18a/0x240
? exit_to_usermode_loop+0x7b/0x80
entry_SYSCALL_64_fastpath+0x17/0x98
Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These clamp_t() calls are no-ops because we don't save the results. It
leads to an array out of bounds bug.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already includes
a copy of the GPL.
remove the unnecessary paragraph
Signed-off-by: Harold Gomez <haroldgmz11@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Making some functions 'static' has uncovered a few functions that
have no caller, through the gcc warnings:
atomisp/i2c/imx/imx.c:1111:12: error: 'imx_t_focus_vcm' defined but not used [-Werror=unused-function]
atomisp/i2c/imx/imx.c:1103:12: error: 'imx_vcm_init' defined but not used [-Werror=unused-function]
atomisp/i2c/imx/imx.c:1095:12: error: 'imx_vcm_power_down' defined but not used [-Werror=unused-function]
atomisp/i2c/imx/imx.c:1087:12: error: 'imx_vcm_power_up' defined but not used [-Werror=unused-function]
All four of these can be removed. Since they call indirect functions,
I also looked at how those are used in turn:
- The power_up/power_down callbacks are called from other functions
and are still needed.
- The t_focus_vcm callbacks pointers are completely unused and can
be removed in both imx and ov8858. Some of the handlers are called
directly and can now be marked static, the others are dummy
implemntations that we can remove.
- vcm_init is unused in imx, but dw9718_vcm_init is used in ov8858,
but is not used in imx, so that one needs to stay around. The callback
pointers in imx can be removed.
Fixes: 9a5a6911aa ("staging: imx: fix non-static declarations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add the as3645a flash controller to the DT source.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add a LED flash class driver for the as3654a flash controller. A V4L2 flash
driver for it already exists (drivers/media/i2c/as3645a.c), and this driver
is based on that.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document DT bindings for Analog Devices as3645a flash LED controller which
also supports an indicator LED.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The v4l2_flash_init() keeps a reference to the ops struct but not to the
config struct (nor anything it contains). Document this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The V4L2 flash interface allows controlling multiple LEDs through a single
sub-devices if, and only if, these LEDs are of different types. This
approach scales badly for flash controllers that drive multiple flash LEDs
or for LED specific associations. Essentially, the original assumption of a
LED driver chip that drives a single flash LED and an indicator LED is no
longer valid.
Address the matter by registering one sub-device per LED.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> (for greybus/light)
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
We are allocating memory for the v4l2 flash configuration structure and
leak it in the normal path. Just use the stack for this as we do not
use it outside of this function.
Also use IS_ERR() instead of IS_ERR_OR_NULL() to check return value from
v4l2_flash_init() for it never returns NULL.
Fixes: 2870b52bae ("greybus: lights: add lights implementation")
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Check memory allocation failure and return -ENOMEM in such a case.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A debug printk statement was copied incorrectly into the new
csi1 parser code and causes a warning there:
drivers/media/platform/omap3isp/isp.c: In function 'isp_probe':
include/linux/dynamic_debug.h:134:3: error: 'i' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Since there is only one lane, the index is never set. This
changes the debug print to always print a zero instead,
keeping the original format of the message.
Fixes: 9211434bad ("media: omap3isp: Parse CSI1 configuration from the device tree")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Sphinx 1.6 generates some LaTeX code before each table,
starting its own environment before calling tabulary,
apparently to improve table layout.
The problem is that such environment is incompatible with
adjustbox. While, in thesis, it should be possible to override
it or to redefine tabulary, I was unable to produce such patch.
Also, that would likely break on some future Sphinx version.
So, instead, let's just change the font size on bigger tables,
in order for them to fit into the page size. That is not as
good as adjustbox, and require some manual work, but it should
be less sensitive to Sphinx changes.
While here, adjust a few other tables whose text is exceeding
the cell boundaries.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Fix those warnings when building on i386:
drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:333:22: warning: constant 1000000000000 is so big it is long long
drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:339:32: warning: constant 1000000000000 is so big it is long long
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add abbreviations explanation at the top header blocks in source files.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the Qualcomm Camera Subsystem driver document with a media
controller pipeline graph diagram.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use standard V4L2 control to get pixel clock rate from a sensor
linked in the media controller pipeline. Then calculate clock
rates on CSIPHY, CSID and VFE to use the lowest possible.
If the currnet pixel clock rate of the sensor cannot be read then
use the highest possible. This case covers also the CSID test
generator usage.
If VFE is already powered on by another pipeline, check that the
current VFE clock rate is high enough for the new pipeline.
If not return busy error code as VFE clock rate cannot be changed
while VFE is running.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add crop module configuration support to be able to apply cropping.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add scaler module configuration support to be able to apply scaling.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update Qualcomm Camera Subsystem driver document for the PIX interface
and format conversion support.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Use VFE PIX input interface and do format conversion in VFE.
Supported input format is UYVY (single plane YUV 4:2:2) and
its different sample order variations.
Supported output formats are:
- NV12/NV21 (two plane YUV 4:2:0)
- NV16/NV61 (two plane YUV 4:2:2)
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add Makefile and update platform/Kconfig and platform/Makefile
to enable building of the QCom CAMSS driver.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These files handle the video device nodes of the camss driver.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These files control the VFE module. The VFE has different input
interfaces. The PIX input interface feeds the input data to an image
processing pipeline. Three RDI input interfaces bypass the image
processing pipeline. The VFE also contains the AXI bus interface which
writes the output data to memory.
RDI interfaces are supported in this version. PIX interface is not
supported.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These files control the ISPIF module which handles the routing of the data
streams from the CSIDs to the inputs of the VFE.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These files control the CSID modules which handle the protocol and
application layer of the CSI2 receivers.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These files control the CSIPHY modules which are responsible for the
physical layer of the CSI2 receivers.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
These formats are compressed 12-bit raw bayer formats with four different
pixel orders. They are similar to 10-bit variants. The formats added by
this patch are
V4L2_PIX_FMT_SBGGR12P
V4L2_PIX_FMT_SGBRG12P
V4L2_PIX_FMT_SGRBG12P
V4L2_PIX_FMT_SRGGB12P
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The calculation of the left volume looks suspect, the value of
0x1f - ((val << 8) & 0x1f) is always 0x1f. The debug prior to the
assignment of value[1] prints the left volume setting using the
calculation 0x1f - (val >> 8) & 0x1f which looks correct to me.
Fix the left volume by using the correct expression as used in
the debug.
Detected by CoverityScan, CID#146140 ("Wrong operator used")
Fixes: 850d24a5a8 ("[media] em28xx-alsa: add mixer support for AC97 volume controls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
videobuf_queue_ops are not supposed to change at runtime. All functions
working with videobuf_queue_ops provided by <media/videobuf-core.h> work
with const videobuf_queue_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
videobuf_queue_ops are not supposed to change at runtime. All functions
working with videobuf_queue_ops provided by <media/videobuf-core.h> work
with const videobuf_queue_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
videobuf_queue_ops are not supposed to change at runtime. All functions
working with videobuf_queue_ops provided by <media/videobuf-core.h> work
with const videobuf_queue_ops. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
