Commit Graph

14 Commits

Author SHA1 Message Date
Thomas Gleixner
e6550b3ee1 treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
Based on the normalized pattern:

    this program is free software you may redistribute it and/or modify it
    under the terms of the gnu general public license as published by the
    free software foundation version 2 of the license  the software is
    provided as is without warranty of any kind express or implied
    including but not limited to the warranties of merchantability fitness
    for a particular purpose and noninfringement in no event shall the
    authors or copyright holders be liable for any claim damages or other
    liability whether in an action of contract tort or otherwise arising
    from out of or in connection with the software or the use or other
    dealings in the software

extracted by the scancode license scanner the SPDX license identifier

    GPL-2.0-only

has been chosen to replace the boilerplate/reference.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 14:51:36 +02:00
Dinghao Liu
d6e3ae7672 scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
When ioread32() returns 0xFFFFFFFF, we should execute cleanup functions
like other error handling paths before returning.

Link: https://lore.kernel.org/r/20201225083520.22015-1-dinghao.liu@zju.edu.cn
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-12 23:32:53 -05:00
Jason Yan
363f4d9375 scsi: fnic: make some symbols static
Fix the following sparse warning:

drivers/scsi/fnic/vnic_dev.c:257:5: warning: symbol 'vnic_dev_cmd1' was
not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:319:5: warning: symbol 'vnic_dev_cmd2' was
not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:414:5: warning: symbol
'vnic_dev_init_devcmd1' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:425:5: warning: symbol
'vnic_dev_init_devcmd2' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:495:6: warning: symbol
'vnic_dev_deinit_devcmd2' was not declared. Should it be static?
drivers/scsi/fnic/vnic_dev.c:506:5: warning: symbol
'vnic_dev_cmd_no_proxy' was not declared. Should it be static?

Link: https://lore.kernel.org/r/20200415093809.9365-1-yanaijie@huawei.com
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-17 13:48:03 -04:00
Arnd Bergmann
42ec15ceae scsi: fnic: fix invalid stack access
gcc -O3 warns that some local variables are not properly initialized:

drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_hang_notify':
drivers/scsi/fnic/vnic_dev.c:511:16: error: 'a0' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[0] = *a0;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:6: note: 'a0' was declared here
  u64 a0, a1;
      ^~
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:691:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~
drivers/scsi/fnic/vnic_dev.c: In function 'fnic_dev_mac_addr':
drivers/scsi/fnic/vnic_dev.c:512:16: error: 'a1' is used uninitialized in this function [-Werror=uninitialized]
  vdev->args[1] = *a1;
  ~~~~~~~~~~~~~~^~~~~
drivers/scsi/fnic/vnic_dev.c:698:10: note: 'a1' was declared here
  u64 a0, a1;
          ^~

Apparently the code relies on the local variables occupying adjacent memory
locations in the same order, but this is of course not guaranteed.

Use an array of two u64 variables where needed to make it work correctly.

I suspect there is also an endianness bug here, but have not digged in deep
enough to be sure.

Fixes: 5df6d737dd ("[SCSI] fnic: Add new Cisco PCI-Express FCoE HBA")
Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200107201602.4096790-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-15 22:59:59 -05:00
Colin Ian King
b23c640c33 scsi: fnic: make array dev_cmd_err static const, makes object smaller
Don't populate the array dev_cmd_err on the stack but instead make it
static const. Makes the object code smaller by 80 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
  21461	   1564	      0	  23025	   59f1	drivers/scsi/fnic/vnic_dev.o

After:
   text	   data	    bss	    dec	    hex	filename
  21318	   1628	      0	  22946	   59a2	drivers/scsi/fnic/vnic_dev.o

(gcc version 9.2.1, amd64)

Link: https://lore.kernel.org/r/20190906163945.3889-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30 22:45:36 -04:00
Satish Kharat
e119d14ca3 scsi: fnic: Enable fnic devcmd2 interface
This patch adds changes to check if fnic devcmd2 interface is exported by
the firmware. If devcmd2 interfaces is exported, driver starts using it
else falls back to fnic devcmd1 interface.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:35 -05:00
Satish Kharat
0a2fdd2215 scsi: fnic: Adding devcmd2 init and posting interfaces
This patch adds fnic devcmd2 interfaces for initialization and posting
commands to fw.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:35 -05:00
Satish Kharat
6c10cb44ea scsi: fnic: fnic devcmd2 controller definitions
This patch adds the fnic devcmd2 controller definitions.

Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22 21:18:34 -05:00
Christoph Hellwig
7f9b0f774f scsi: fnic: switch to generic DMA API
Switch from the legacy PCI DMA API to the generic DMA API.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-10-17 21:58:52 -04:00
Andy Shevchenko
36fe90b0f0 scsi: fnic: use kernel's '%pM' format option to print MAC
Instead of supplying each byte through stack let's use %pM specifier.

Cc: Hiral Patel <hiralpat@cisco.com>
Cc: Suma Ramars <sramars@cisco.com>
Acked-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:57 -05:00
Hiral Patel
d3c995f1dc [SCSI] fnic: FIP VLAN Discovery Feature Support
FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN.  Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release.  Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02 07:30:40 -07:00
Venkata Siva Vijayendra Bhamidipati
c954f8aed4 [SCSI] fnic: fix memory leak
Fix memory leak arising due to incorrect freeing of allocated memory
for vnic stats when unregistering a vnic.

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Venkata Siva Vijayendra Bhamidipati <vbhamidi@cisco.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-02-12 10:58:02 -06:00
Tejun Heo
5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Abhijeet Joglekar
5df6d737dd [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA
fnic is a driver for the Cisco PCI-Express FCoE HBA

Signed-off-by: Abhijeet Joglekar <abjoglek@cisco.com>
Signed-off-by: Joe Eykholt <jeykholt@cisco.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-13 22:13:09 -04:00