Add __tlb_remove_folio_pages(), which will remove multiple consecutive
pages that belong to the same large folio, instead of only a single page.
We'll be using this function when optimizing unmapping/zapping of large
folios that are mapped by PTEs.
We're using the remaining spare bit in an encoded_page to indicate that
the next enoced page in an array contains actually shifted "nr_pages".
Teach swap/freeing code about putting multiple folio references, and
delayed rmap handling to remove page ranges of a folio.
This extension allows for still gathering almost as many small folios as
we used to (-1, because we have to prepare for a possibly bigger next
entry), but still allows for gathering consecutive pages that belong to
the same large folio.
Note that we don't pass the folio pointer, because it is not required for
now. Further, we don't support page_size != PAGE_SIZE, it won't be
required for simple PTE batching.
We have to provide a separate s390 implementation, but it's fairly
straight forward.
Another, more invasive and likely more expensive, approach would be to use
folio+range or a PFN range instead of page+nr_pages. But, we should do
that consistently for the whole mmu_gather. For now, let's keep it simple
and add "nr_pages" only.
Note that it is now possible to gather significantly more pages: In the
past, we were able to gather ~10000 pages, now we can also gather ~5000
folio fragments that span multiple pages. A folio fragment on x86-64 can
span up to 512 pages (2 MiB THP) and on arm64 with 64k in theory 8192
pages (512 MiB THP). Gathering more memory is not considered something we
should worry about, especially because these are already corner cases.
While we can gather more total memory, we won't free more folio fragments.
As long as page freeing time primarily only depends on the number of
involved folios, there is no effective change for !preempt configurations.
However, we'll adjust tlb_batch_pages_flush() separately to handle corner
cases where page freeing time grows proportionally with the actual memory
size.
Link: https://lkml.kernel.org/r/20240214204435.167852-9-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's add a helper that lets us batch-process multiple consecutive PTEs.
Note that the loop will get optimized out on all architectures except on
powerpc. We have to add an early define of __tlb_remove_tlb_entry() on
ppc to make the compiler happy (and avoid making tlb_remove_tlb_entries()
a macro).
[arnd@kernel.org: change __tlb_remove_tlb_entry() to an inline function]
Link: https://lkml.kernel.org/r/20240221154549.2026073-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20240214204435.167852-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nowadays, encoded pages are only used in mmu_gather handling. Let's
update the documentation, and define ENCODED_PAGE_BIT_DELAY_RMAP. While
at it, rename ENCODE_PAGE_BITS to ENCODED_PAGE_BITS.
If encoded page pointers would ever be used in other context again, we'd
likely want to change the defines to reflect their context (e.g.,
ENCODED_PAGE_FLAG_MMU_GATHER_DELAY_RMAP). For now, let's keep it simple.
This is a preparation for using the remaining spare bit to indicate that
the next item in an array of encoded pages is a "nr_pages" argument and
not an encoded page.
Link: https://lkml.kernel.org/r/20240214204435.167852-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have two bits available in the encoded page pointer to store additional
information. Currently, we use one bit to request delay of the rmap
removal until after a TLB flush.
We want to make use of the remaining bit internally for batching of
multiple pages of the same folio, specifying that the next encoded page
pointer in an array is actually "nr_pages". So pass page + delay_rmap
flag instead of an encoded page, to handle the encoding internally.
Link: https://lkml.kernel.org/r/20240214204435.167852-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's prepare for further changes by factoring it out into a separate
function.
Link: https://lkml.kernel.org/r/20240214204435.167852-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We don't need up-to-date accessed-dirty information for anon folios and
can simply work with the ptent we already have. Also, we know the RSS
counter we want to update.
We can safely move arch_check_zapped_pte() + tlb_remove_tlb_entry() +
zap_install_uffd_wp_if_needed() after updating the folio and RSS.
While at it, only call zap_install_uffd_wp_if_needed() if there is even
any chance that pte_install_uffd_wp_if_needed() would do *something*.
That is, just don't bother if uffd-wp does not apply.
Link: https://lkml.kernel.org/r/20240214204435.167852-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We don't need uptodate accessed/dirty bits, so in theory we could replace
ptep_get_and_clear_full() by an optimized ptep_clear_full() function.
Let's rely on the provided pte.
Further, there is no scenario where we would have to insert uffd-wp
markers when zapping something that is not a normal page (i.e., zeropage).
Add a sanity check to make sure this remains true.
should_zap_folio() no longer has to handle NULL pointers. This change
replaces 2/3 "!page/!folio" checks by a single "!page" one.
Note that arch_check_zapped_pte() on x86-64 checks the HW-dirty bit to
detect shadow stack entries. But for shadow stack entries, the HW dirty
bit (in combination with non-writable PTEs) is set by software. So for
the arch_check_zapped_pte() check, we don't have to sync against HW
setting the HW dirty bit concurrently, it is always set.
Link: https://lkml.kernel.org/r/20240214204435.167852-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/memory: optimize unmap/zap with PTE-mapped THP", v3.
This series is based on [1]. Similar to what we did with fork(), let's
implement PTE batching during unmap/zap when processing PTE-mapped THPs.
We collect consecutive PTEs that map consecutive pages of the same large
folio, making sure that the other PTE bits are compatible, and (a) adjust
the refcount only once per batch, (b) call rmap handling functions only
once per batch, (c) perform batch PTE setting/updates and (d) perform TLB
entry removal once per batch.
Ryan was previously working on this in the context of cont-pte for arm64,
int latest iteration [2] with a focus on arm6 with cont-pte only. This
series implements the optimization for all architectures, independent of
such PTE bits, teaches MMU gather/TLB code to be fully aware of such
large-folio-pages batches as well, and amkes use of our new rmap batching
function when removing the rmap.
To achieve that, we have to enlighten MMU gather / page freeing code
(i.e., everything that consumes encoded_page) to process unmapping of
consecutive pages that all belong to the same large folio. I'm being very
careful to not degrade order-0 performance, and it looks like I managed to
achieve that.
While this series should -- similar to [1] -- be beneficial for adding
cont-pte support on arm64[2], it's one of the requirements for maintaining
a total mapcount[3] for large folios with minimal added overhead and
further changes[4] that build up on top of the total mapcount.
Independent of all that, this series results in a speedup during munmap()
and similar unmapping (process teardown, MADV_DONTNEED on larger ranges)
with PTE-mapped THP, which is the default with THPs that are smaller than
a PMD (for example, 16KiB to 1024KiB mTHPs for anonymous memory[5]).
On an Intel Xeon Silver 4210R CPU, munmap'ing a 1GiB VMA backed by
PTE-mapped folios of the same size (stddev < 1%) results in the following
runtimes for munmap() in seconds (shorter is better):
Folio Size | mm-unstable | New | Change
---------------------------------------------
4KiB | 0.058110 | 0.057715 | - 1%
16KiB | 0.044198 | 0.035469 | -20%
32KiB | 0.034216 | 0.023522 | -31%
64KiB | 0.029207 | 0.018434 | -37%
128KiB | 0.026579 | 0.014026 | -47%
256KiB | 0.025130 | 0.011756 | -53%
512KiB | 0.024292 | 0.010703 | -56%
1024KiB | 0.023812 | 0.010294 | -57%
2048KiB | 0.023785 | 0.009910 | -58%
[1] https://lkml.kernel.org/r/20240129124649.189745-1-david@redhat.com
[2] https://lkml.kernel.org/r/20231218105100.172635-1-ryan.roberts@arm.com
[3] https://lkml.kernel.org/r/20230809083256.699513-1-david@redhat.com
[4] https://lkml.kernel.org/r/20231124132626.235350-1-david@redhat.com
[5] https://lkml.kernel.org/r/20231207161211.2374093-1-ryan.roberts@arm.com
This patch (of 10):
Let's prepare for further changes by factoring out processing of present
PTEs.
Link: https://lkml.kernel.org/r/20240214204435.167852-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240214204435.167852-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest to cover the zswapin code path, allocating more memory than
the cgroup limit to trigger swapout/zswapout, then reading the pages back
in memory several times. This is inspired by a recently encountered
kernel crash on the zswapin path in our internal kernel, which went
undetected because of a lack of test coverage for this path.
Add a selftest to verify that when memory.zswap.max = 0, no pages can go
to the zswap pool for the cgroup.
[nphamcs@gmail.com: remove redundant comment, add success checks]
Link: https://lkml.kernel.org/r/20240222043132.616320-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205225608.3083251-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Rik van Riel <riel@surriel.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "fix and extend zswap kselftests", v3.
Fix a broken zswap kselftest due to cgroup zswap writeback counter
renaming, and add 2 zswap kselftests, one to cover the (z)swapin case, and
another to check that no zswapping happens when the cgroup limit is 0.
Also, add the zswap kselftest file to zswap maintainer entry so that
get_maintainers script can find zswap maintainers.
This patch (of 3):
Make it easier for contributors to find the zswap maintainers when they
update the zswap tests.
Link: https://lkml.kernel.org/r/20240205225608.3083251-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205225608.3083251-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It can not improve the fragmentation if we isolate the target free pages
exceeding cc->order, especially when the cc->order is less than
pageblock_order. For example, suppose the pageblock_order is MAX_ORDER
(size is 4M) and cc->order is 2M THP size, we should not isolate other 2M
free pages to be the migration target, which can not improve the
fragmentation.
Moreover this is also applicable for large folio compaction.
Link: https://lkml.kernel.org/r/afcd9377351c259df7a25a388a4a0d5862b986f4.1705928395.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently zram allocates 2 physically contiguous pages per-CPU's
compression stream (we may have up to 4 streams per-CPU). Since those
buffers are per-CPU we allocate them from CPU hotplug path, which may have
higher risks of failed allocations on devices with fragmented memory.
Switch to virtually contiguous allocations - crypto comp does not seem
impose requirements on compression working buffers to be physically
contiguous.
Link: https://lkml.kernel.org/r/20240213065400.6561-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All platforms could benefit from page order check against MAX_PAGE_ORDER
before allocating a CMA area for gigantic hugetlb pages. Let's move this
check from individual platforms to generic hugetlb.
Link: https://lkml.kernel.org/r/20240209054221.1403364-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The reclaimable number of anon pages used to set initial reclaim priority
is only based on get_swappiness(). Use can_reclaim_anon_pages() to
include NUMA node demotion.
Also move the swappiness handling of when !__GFP_IO in
try_to_shrink_lruvec() into isolate_folios().
Link: https://lkml.kernel.org/r/20240214060538.3524462-6-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename max_seq to seq in struct lru_gen_mm_walk to keep consistent with
struct lru_gen_mm_state. Note that seq is not always up to date with
max_seq from lru_gen_folio.
No functional changes.
Link: https://lkml.kernel.org/r/20240214060538.3524462-5-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
struct lruvec* is already a field of struct lru_gen_mm_walk. Remove the
parameter struct lruvec* into functions that already have access to struct
lru_gen_mm_walk*.
Also, we do not need to handle reset histogram stats when
!should_walk_mmu(). Remove the call to reset_mm_stats() in
iterate_mm_list_nowalk().
Link: https://lkml.kernel.org/r/20240214060538.3524462-4-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
scan_control *sc does not need to be passed into should_run_aging(), as it
provides only the reclaim priority. This can be moved to
get_nr_to_scan().
Refactor should_run_aging() and get_nr_to_scan() to improve code
readability. No functional changes.
Link: https://lkml.kernel.org/r/20240214060538.3524462-3-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mglru: code cleanup and refactoring"
This provides MGLRU code cleanup and refactoring for better readability.
This patch (of 5):
struct scan_control *sc is currently passed into try_to_inc_max_seq() and
run_aging(). This parameter is not used.
Drop the unused parameter struct scan_control *sc. No functional change.
Link: https://lkml.kernel.org/r/20240214060538.3524462-1-kinseyho@google.com
Link: https://lkml.kernel.org/r/20240214060538.3524462-2-kinseyho@google.com
Signed-off-by: Kinsey Ho <kinseyho@google.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Donet Tom <donettom@linux.vnet.ibm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The out-of-bounds test allocates an object that is three bytes too short
in order to validate the bounds checking. Starting with gcc-14, this
causes a compile-time warning as gcc has grown smart enough to understand
the sizeof() logic:
mm/kasan/kasan_test.c: In function 'kmalloc_oob_16':
mm/kasan/kasan_test.c:443:14: error: allocation of insufficient size '13' for type 'struct <anonymous>' with size '16' [-Werror=alloc-size]
443 | ptr1 = kmalloc(sizeof(*ptr1) - 3, GFP_KERNEL);
| ^
Hide the actual computation behind a RELOC_HIDE() that ensures
the compiler misses the intentional bug.
Link: https://lkml.kernel.org/r/20240212111609.869266-1-arnd@kernel.org
Fixes: 3f15801cdc ("lib: add kasan test module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The memalloc_noreclaim_save() function currently has no documentation
comment, so the implications of its usage are not obvious. Namely that it
not only prevents entering reclaim (as the name suggests), but also allows
using all memory reserves and thus should be only used in contexts that
are allocating memory to free memory. This may lead to new improper
usages being added.
Thus add a documenting comment, based on the description of
__GFP_MEMALLOC. While at it, also document memalloc_pin_save() so that
all the memalloc_ scopes are documented. For those already documented,
add missing Return: descriptions, and mark Context: description per
kernel-docs style guide.
In the comments describing the relevant PF_MEMALLOC flags, refer to their
scope setting functions.
[vbabka@suse.cz: fix issues that Mike pointed out]
Link: https://lkml.kernel.org/r/20240215095827.13756-2-vbabka@suse.cz
Link: https://lkml.kernel.org/r/20240212182950.32730-2-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We may encounter duplicate entry in the zswap_store():
1. swap slot that freed to per-cpu swap cache, doesn't invalidate
the zswap entry, then got reused. This has been fixed.
2. !exclusive load mode, swapin folio will leave its zswap entry
on the tree, then swapout again. This has been removed.
3. one folio can be dirtied again after zswap_store(), so need to
zswap_store() again. This should be handled correctly.
So we must invalidate the old duplicate entry before inserting the
new one, which actually doesn't have to be done at the beginning
of zswap_store().
The good point is that we don't need to lock the tree twice in the normal
store success path. And cleanup the loop as we are here.
Note we still need to invalidate the old duplicate entry when store failed
or zswap is disabled , otherwise the new data in swapfile could be
overwrite by the old data in zswap pool when lru writeback.
Link: https://lkml.kernel.org/r/20240209044112.3883835-1-chengming.zhou@linux.dev
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Every test result report in the compaction test prints a distinct log
messae, and some of the reports print a name that varies at runtime. This
causes problems for automation since a lot of automation software uses the
printed string as the name of the test, if the name varies from run to run
and from pass to fail then the automation software can't identify that a
test changed result or that the same tests are being run.
Refactor the logging to use a consistent name when printing the result of
the test, printing the existing messages as diagnostic information instead
so they are still available for people trying to interpret the results.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-2-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Output cleanups for the compaction test".
A couple of small updates for the check_compaction selftest which make
it play more nicely with test automation systems.
This patch (of 2):
When the compaction test is run it checks to make sure that prerequistives
the test requires are available and skips the tests if not. When this
happens we log the test as a pass rather than a skip, log as a skip so
that the distinction is clear and automation can see unexpected skips.
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-0-a3c0386496b5@kernel.org
Link: https://lkml.kernel.org/r/20240209-kselftest-mm-cleanup-v1-1-a3c0386496b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Refactor compact_node() to handle both proactive and synchronous compact
memory, which cleanups code a bit.
Link: https://lkml.kernel.org/r/20240208013607.1731817-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds the following new sysfs file tracking the number of successfully
released pages from a given CMA heap area. This file will be available
via CONFIG_CMA_SYSFS and help in determining active CMA pages available on
the CMA heap area. This adds a new 'nr_pages_released' (CONFIG_CMA_SYSFS)
into 'struct cma' which gets updated during cma_release().
/sys/kernel/mm/cma/<cma-heap-area>/release_pages_success
After this change, an user will be able to find active CMA pages available
in a given CMA heap area via the following method.
Active pages = alloc_pages_success - release_pages_success
That's valuable information for both software designers, and system admins
as it allows them to tune the number of CMA pages available in the system.
This increases user visibility for allocated CMA area and its
utilization.
Link: https://lkml.kernel.org/r/20240206045731.472759-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON debugfs selftests dependency checker assumes debugfs would be
mounted at /sys/kernel/debug. That would be ok for many cases, but some
systems might mounted the file system on some different places. Parse the
real mount point using /proc/mounts file.
Link: https://lkml.kernel.org/r/20240207203134.69976-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit ebb3f994dd ("mm/damon/dbgfs: fix 'struct pid' leaks in
'dbgfs_target_ids_write()'") fixes a pid leak bug in DAMON debugfs
interface, namely dbgfs_target_ids_write() function. Add a selftest for
the issue to prevent the problem from mistakenly recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 3479641796 ("mm/damon/dbgfs: protect targets destructions with
kdamond_lock") fixed a race of DAMON debugfs interface. Specifically, the
race was happening between target_ids_read() and dbgfs_before_terminate().
Add a test for the issue to prevent the problem from accidentally
recurring.
Link: https://lkml.kernel.org/r/20240207203134.69976-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for DAMOS apply intervals. It runs two schemes having
different apply interval agains an artificial memory access workload, and
check if the scheme with smaller apply interval was applied more
frequently.
Link: https://lkml.kernel.org/r/20240207203134.69976-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for verifying the DAMOS quota feature. The test is very
similar to sysfs_update_schemes_tried_regions_wss_estimation.py. It
starts an artificial workload of 20 MiB working set, run DAMON to find the
working set size, but with 1 MiB/100 ms size quota. Then, it collect the
DAMON-found working set size every 100 ms and check if the quota was
always applied as expected. For the confirmation, the tests shows the
stat-applied region size and the qt_exceeds stat.
Link: https://lkml.kernel.org/r/20240207203134.69976-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the test-purpose DAMON sysfs control Python module to support DAMOS
apply interval.
Link: https://lkml.kernel.org/r/20240207203134.69976-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the test-purpose DAMON sysfs control Python module to support DAMOS
stats.
Link: https://lkml.kernel.org/r/20240207203134.69976-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: add more tests for core functionalities and
corner cases".
Continue DAMON selftests' test coverage improvement works with a trivial
improvement of the test code itself. The sequence of the patches in
patchset is as follows.
The first five patches add two DAMON core functionalities tests. Those
begins with three patches (patches 1-3) that update the test-purpose DAMON
sysfs interface wrapper to support DAMOS quota, stats, and apply interval
features, respectively. The fourth patch implements and adds a selftest
for DAMOS quota feature, using the DAMON sysfs interface wrapper's newly
added support of the quota and the stats feature. The fifth patch further
implements and adds a selftest for DAMOS apply interval using the DAMON
sysfs interface wrapper's newly added support of the apply interval and
the stats feature.
Two patches (patches 6 and 7) for implementing and adding two corner cases
handling selftests follow. Those try to avoid two previously fixed bugs
from recurring.
Finally, a patch for making DAMON debugfs selftests dependency checker to
use /proc/mounts instead of the hard-coded mount point assumption follows.
This patch (of 8):
Update the test-purpose DAMON sysfs control Python module to support DAMOS
quota.
Link: https://lkml.kernel.org/r/20240207203134.69976-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240207203134.69976-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures, such as arm, have implemented optimized copy_page for
full page copying.
Replace the full page memcpy with copy_page to take advantage of the
optimization.
Link: https://lkml.kernel.org/r/20231007070554.8657-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, when a demotion occurs, it will prioritize selecting a node
from the preferred targets as the destination node for the demotion. If
the preferred node does not meet the requirements, it will try from all
the lower memory tier nodes until it finds a suitable demotion destination
node or ultimately fails.
However, the demotion target information isn't exposed to the users,
especially the preferred target information, which relies on more factors.
This makes it hard for users to understand the exact demotion behavior.
Rather than having a new sysfs interface to expose this information,
printing directly to kernel messages, just like the current page
allocation fallback order does.
A dmesg example with this patch is as follows:
[ 0.704860] Demotion targets for Node 0: null
[ 0.705456] Demotion targets for Node 1: null
// node 2 is onlined
[ 32.259775] Demotion targets for Node 0: perferred: 2, fallback: 2
[ 32.261290] Demotion targets for Node 1: perferred: 2, fallback: 2
[ 32.262726] Demotion targets for Node 2: null
// node 3 is onlined
[ 42.448809] Demotion targets for Node 0: perferred: 2, fallback: 2-3
[ 42.450704] Demotion targets for Node 1: perferred: 2, fallback: 2-3
[ 42.452556] Demotion targets for Node 2: perferred: 3, fallback: 3
[ 42.454136] Demotion targets for Node 3: null
// node 4 is onlined
[ 52.676833] Demotion targets for Node 0: perferred: 2, fallback: 2-4
[ 52.678735] Demotion targets for Node 1: perferred: 2, fallback: 2-4
[ 52.680493] Demotion targets for Node 2: perferred: 4, fallback: 3-4
[ 52.682154] Demotion targets for Node 3: null
[ 52.683405] Demotion targets for Node 4: null
// node 5 is onlined
[ 62.931902] Demotion targets for Node 0: perferred: 2, fallback: 2-5
[ 62.938266] Demotion targets for Node 1: perferred: 5, fallback: 2-5
[ 62.943515] Demotion targets for Node 2: perferred: 4, fallback: 3-4
[ 62.947471] Demotion targets for Node 3: null
[ 62.949908] Demotion targets for Node 4: null
[ 62.952137] Demotion targets for Node 5: perferred: 3, fallback: 3-4
Regarding this requirement, we have previously discussed [1]. The initial
proposal involved introducing a new sysfs interface. However, due to
concerns about potential changes and compatibility issues with the
interface in the future, a consensus was not reached with the community.
Therefore, this time, we are directly printing out the information.
[1] https://lore.kernel.org/all/d1d5add8-8f4a-4578-8bf0-2cbe79b09989@fujitsu.com/
Link: https://lkml.kernel.org/r/20240206020151.605516-1-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface need to access kdamond-touching data for some of
kdamond user commands. It uses ->after_aggregation() kdamond callback to
safely access the data in the case. It had to use the aggregation
interval callback because that was the only callback that users can access
complete monitoring results.
Since patch series "mm/damon: provide pseudo-moving sum based access
rate", which starts from commit 78fbfb155d ("mm/damon/core: define and
use a dedicated function for region access rate update"), DAMON provides
good-to-use quality moitoring results for every sampling interval. It
aims to help users who need to quickly retrieve the monitoring results.
When the aggregation interval is set too long and therefore waiting for
the aggregation interval can degrade user experience, or when the access
pattern is expected to be significantly changed[1] could be such cases.
However, because DAMON sysfs interface is still handling the commands per
aggregation interval, the end user cannot get the benefit. Update DAMON
sysfs interface to handle kdamond commands for every sampling interval if
applicable. Specifically, all kdamond data accessing commands except
'commit' command are applicable.
[1] https://lore.kernel.org/r/20240129121316.GA9706@cuiyangpei
Link: https://lkml.kernel.org/r/20240206025158.203097-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: xiongping1 <xiongping1@xiaomi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
alloc_and_dissolve_hugetlb_folio() preallocates a new hugetlb page before
it takes hugetlb_lock. In 3 out of 4 cases the page is not really used
and therefore the newly allocated page is just freed right away. This is
wasteful and it might cause pre-mature failures in those cases.
Address that by moving the allocation down to the only case (hugetlb page
is really in the free pages pool). We need to drop hugetlb_lock to do so
and therefore need to recheck the page state after regaining it.
The patch is more of a cleanup than an actual fix to an existing problem.
There are no known reports about pre-mature failures.
Link: https://lkml.kernel.org/r/62890fd60b1ecd5bf1cdc476c973f60fe37aa0cb.1707181934.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pte_mkdirty() sets both _PAGE_DIRTY and _PAGE_SOFT_DIRTY bits. The
_PAGE_SOFT_DIRTY can get set even if it wasn't set on original page before
migration. This makes non-soft-dirty pages soft-dirty just because of
migration/compaction. Clear the _PAGE_SOFT_DIRTY flag if it wasn't set on
original page.
By definition of soft-dirty feature, there can be spurious soft-dirty
pages because of kernel's internal activity such as VMA merging or
migration/compaction. This patch is eliminating the spurious soft-dirty
pages because of migration/compaction.
Link: https://lkml.kernel.org/r/20240206084838.34560-1-usama.anjum@collabora.com
Signed-off-by: Paul Gofman <pgofman@codeweavers.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Andrei Vagin <avagin@gmail.com>
Cc: Michał Mirosław <emmir@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since we don't need to leave zswap entry on the zswap tree anymore,
we should remove it from tree once we find it from the tree.
Then after using it, we can directly free it, no concurrent path
can find it from tree. Only the shrinker can see it from lru list,
which will also double check under tree lock, so no race problem.
So we don't need refcount in zswap entry anymore and don't need to
take the spinlock for the second time to invalidate it.
The side effect is that zswap_entry_free() maybe not happen in tree
spinlock, but it's ok since nothing need to be protected by the lock.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-6-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The !zswap_exclusive_loads_enabled mode will leave compressed copy in
the zswap tree and lru list after the folio swapin.
There are some disadvantages in this mode:
1. It's a waste of memory since there are two copies of data, one is
folio, the other one is compressed data in zswap. And it's unlikely
the compressed data is useful in the near future.
2. If that folio is dirtied, the compressed data must be not useful,
but we don't know and don't invalidate the trashy memory in zswap.
3. It's not reclaimable from zswap shrinker since zswap_writeback_entry()
will always return -EEXIST and terminate the shrinking process.
On the other hand, the only downside of zswap_exclusive_loads_enabled
is a little more cpu usage/latency when compression, and the same if
the folio is removed from swapcache or dirtied.
More explanation by Johannes on why we should consider exclusive load
as the default for zswap:
Caching "swapout work" is helpful when the system is thrashing. Then
recently swapped in pages might get swapped out again very soon. It
certainly makes sense with conventional swap, because keeping a clean
copy on the disk saves IO work and doesn't cost any additional memory.
But with zswap, it's different. It saves some compression work on a
thrashing page. But the act of keeping compressed memory contributes
to a higher rate of thrashing. And that can cause IO in other places
like zswap writeback and file memory.
And the A/B test results of the kernel build in tmpfs with limited memory
can support this theory:
!exclusive exclusive
real 63.80 63.01
user 1063.83 1061.32
sys 290.31 266.15
workingset_refault_anon 2383084.40 1976397.40
workingset_refault_file 44134.00 45689.40
workingset_activate_anon 837878.00 728441.20
workingset_activate_file 4710.00 4085.20
workingset_restore_anon 732622.60 639428.40
workingset_restore_file 1007.00 926.80
workingset_nodereclaim 0.00 0.00
pgscan 14343003.40 12409570.20
pgscan_kswapd 0.00 0.00
pgscan_direct 14343003.40 12409570.20
pgscan_khugepaged 0.00 0.00
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-5-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cat /sys/kernel/debug/zswap/duplicate_entry
2086447
When testing, the duplicate_entry value is very high, but no warning
message in the kernel log. From the comment of duplicate_entry "Duplicate
store was encountered (rare)", it seems something goes wrong.
Actually it's incremented in the beginning of zswap_store(), which found
its zswap entry has already on the tree. And this is a normal case, since
the folio could leave zswap entry on the tree after swapin, later it's
dirtied and swapout/zswap_store again, found its original zswap entry.
So duplicate_entry should be only incremented in the real bug case, which
already have "WARN_ON(1)", it looks redundant to count bug case, so this
patch just remove it.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-4-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the shrinker encounter an existing folio in swap cache, it means we
are shrinking into the warmer region. We should terminate shrinking if
we're in the dynamic shrinker context.
This patch add LRU_STOP to support this, to avoid overshrinking.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-3-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During testing I found there are some times the zswap_writeback_entry()
return -ENOMEM, which is not we expected:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[-12]: 1563
@[0]: 277221
The reason is that __read_swap_cache_async() return NULL because
swapcache_prepare() failed. The reason is that we won't invalidate zswap
entry when swap entry freed to the per-cpu pool, these zswap entries are
still on the zswap tree and lru list.
This patch moves the invalidation ahead to when swap entry freed to the
per-cpu pool, since there is no any benefit to leave trashy zswap entry on
the tree and lru list.
With this patch:
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
@[0]: 259744
Note: large folio can't have zswap entry for now, so don't bother
to add zswap entry invalidation in the large folio swap free path.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-2-99d4084260a0@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/zswap: optimize zswap lru list", v2.
This series is motivated when observe the zswap lru list shrinking, noted
there are some unexpected cases in zswap_writeback_entry().
bpftrace -e 'kr:zswap_writeback_entry {@[(int32)retval]=count()}'
There are some -ENOMEM because when the swap entry is freed to per-cpu
swap pool, it doesn't invalidate/drop zswap entry. Then the shrinker
encounter these trashy zswap entries, it can't be reclaimed and return
-ENOMEM.
So move the invalidation ahead to when swap entry freed to the per-cpu
swap pool, since there is no any benefit to leave trashy zswap entries on
the zswap tree and lru list.
Another case is -EEXIST, which is seen more in the case of
!zswap_exclusive_loads_enabled, in which case the swapin folio will leave
compressed copy on the tree and lru list. And it can't be reclaimed until
the folio is removed from swapcache.
Changing to zswap_exclusive_loads_enabled mode will invalidate when folio
swapin, which has its own drawback if that folio is still clean in
swapcache and swapout again, we need to compress it again. Please see the
commit for details on why we choose exclusive load as the default for
zswap.
Another optimization for -EEXIST is that we add LRU_STOP to support
terminating the shrinking process to avoid evicting warmer region.
Testing using kernel build in tmpfs, one 50GB swapfile and
zswap shrinker_enabled, with memory.max set to 2GB.
mm-unstable zswap-optimize
real 63.90s 63.25s
user 1064.05s 1063.40s
sys 292.32s 270.94s
The main optimization is in sys cpu, about 7% improvement.
This patch (of 6):
Add more comments in shrink_memcg_cb() to describe the deref dance which
is implemented to fix race problem between lru writeback and swapoff, and
the reason why we rotate the entry at the beginning.
Also fix the stale comments in zswap_writeback_entry(), and add more
comments to state that we only deref the tree after we get the swapcache
reference.
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-0-99d4084260a0@bytedance.com
Link: https://lkml.kernel.org/r/20240201-b4-zswap-invalidate-entry-v2-1-99d4084260a0@bytedance.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that the driver core can properly handle constant struct bus_type,
move the memory_tier_subsys variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Link: https://lkml.kernel.org/r/20240204-bus_cleanup-mm-v1-1-00f49286f164@marliere.net
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
too_many_isolated() should return bool as does the similar
too_many_isolated() in mm/compaction.c.
Link: https://lkml.kernel.org/r/20240205042618.108140-1-gehao@kylinos.cn
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is no real difference between the global area, and other
additionally configured CMA areas via CONFIG_CMA_AREAS that always
defaults without user input. This makes MAX_CMA_AREAS same as
CONFIG_CMA_AREAS, also incrementing its default values, thus maintaining
current default for MAX_CMA_AREAS both for UMA and NUMA systems.
Link: https://lkml.kernel.org/r/20240205051929.298559-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All pr_debug() prints in (mm/cma.c) could be enabled via standard Makefile
based method. Besides cma_debug_show_areas() should always be called
during cma_alloc() failure path. This seemingly redundant config,
CONFIG_CMA_DEBUG can be dropped without any problem.
[lukas.bulwahn@gmail.com: remove debug code to removed CONFIG_CMA_DEBUG]
Link: https://lkml.kernel.org/r/20240207143825.986-1-lukas.bulwahn@gmail.com
Link: https://lkml.kernel.org/r/20240205031647.283510-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
