The HP ProBook 630 G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-3-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 445 G8 using ALC236 codec.
COEF index 0x34 bit 5 is used to control the playback mute LED, but the
microphone mute LED is controlled using pin VREF instead of a COEF index.
Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-2-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 450 G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are backwards from Table 7-71 of the TLV320AIC3100 spec [1].
This was broken in 12eb4d66ba when BCLK_MASTER and WCLK_MASTER
were converted from 0x08 and 0x04 to BIT(2) and BIT(3), respectively.
-#define AIC31XX_BCLK_MASTER 0x08
-#define AIC31XX_WCLK_MASTER 0x04
+#define AIC31XX_BCLK_MASTER BIT(2)
+#define AIC31XX_WCLK_MASTER BIT(3)
Probably just a typo since the defines were not listed in bit order.
[1] https://www.ti.com/lit/gpn/tlv320aic3100
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Link: https://lore.kernel.org/r/20210622010941.241386-1-bkylerussell@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDZzCgACgkQJNaLcl1U
h9DmKAf+IhmeYLxMuSe7uC/BZHQN1PFFHDb9rNyznqYD0kCzgfqvt7RIbbpOB83g
Rw6+SnKWq1k2LOtJc7nVfFXfCrWTCH/GkqH22YoDWUjc2ZLTLE4V/dZhrYzggkjz
qE4bOUNBHUyqO0Xir1iMFCdr9V4+Fc5iYT83FccHB+hF+o8GNcU0MkovUKgiTeuz
EChmQlfsOHxKU6DbRUQrO30plSTaCQZ9CHAOXlGRQnGaYH/99ecav2O7sM1F4SrI
uHR544UuJUiZ26PcZ5M66GvuwAOoSw/v6Tr/OykBulgFUX8wafDcHq7vGK5A6WCE
qGwWpe12E+veMsJjn7wzifryaxJ9zQ==
=F1Zu
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.14
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
Mixer control put callbacks should return 1 if the value is changed.
Fix the mute, air, phantom, direct monitor, speaker switch, talkback,
and MSD controls accordingly.
Fix scarlett2_speaker_switch_enable() to not ignore the return value
of scarlett2_sw_hw_change().
Reported-by: Aaron Wolf <aaron@wolftune.com>
Tested-by: Aaron Wolf <aaron@wolftune.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/76643f7ac81aef93351122d07881e30d51dcb1b9.1624798436.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 Gen 3 has 4 inputs with a pad control, not 2. Update
s18i8_gen3_info.pad_input_count.
Reported-by: Aaron Wolf <aaron@wolftune.com>
Tested-by: Aaron Wolf <aaron@wolftune.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/29a6ce412a42373daab7c96c395560461fcf08c6.1624798436.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The biggest single thing in the diffstat here is a massive overhaul of
the PXA2xx driver from Andy Shevchenko (the IP is still in use on modern
Intel systems), though we also have quite a lot of core work as well:
- Better support for mixing native and GPIO chip selects also from
Andy.
- Support for devices with multiple chip selects from Sebastian
Reichel.
- Helper for polling status registers in spi-mem from Patrice Chotard.
- Support for Renesas RZ/N1 and Rockchip RV1126.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDZ1XMACgkQJNaLcl1U
h9Cw4Qf/dD9K8Psa6oBLrJBVH9L8Bl8UN36UyrZgnZP/cydlPp3MkLpwg9K/mwPV
zqYEm/WcI5mzZ7+RxVwK3fchEBFtlKcIGe2lvfqGBCsVGW8NMtoaiSsCtJ9NoKLk
Q3cjYbERql26sl7fyEx4tCEMGHsRP8XuToyPCm4htSayY6Wh7dsCLpsDPqszeK/c
KnGQItG1hGkXJmy4A47AZqdJlRjeoNxdfnwkE0dxihDmzirE86r4x+QqTVw/OGT/
sE8dtxjuR1bC04oY7I0J3yvgFSA1VxPR+vP0b8KQcXd0pJbTooYppQHDQmltFJ7i
KThmZhDLCsQ8Q/PuWJF7NIPD+gbAoA==
=zcuM
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The biggest single thing in the diffstat here is a massive overhaul of
the PXA2xx driver from Andy Shevchenko (the IP is still in use on
modern Intel systems), though we also have quite a lot of core work as
well:
- Better support for mixing native and GPIO chip selects also from
Andy.
- Support for devices with multiple chip selects from Sebastian
Reichel.
- Helper for polling status registers in spi-mem from Patrice
Chotard.
- Support for Renesas RZ/N1 and Rockchip RV1126"
* tag 'spi-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (86 commits)
spi: core: add dma_map_dev for dma device
spi: convert Xilinx Zynq UltraScale+ MPSoC GQSPI bindings to YAML
spi: Fix self assignment issue with ancillary->mode
spi: spi-sh-msiof: : use proper DMAENGINE API for termination
spi: spi-rspi: : use proper DMAENGINE API for termination
spi: spi-rockchip: add description for rv1126
spi: rockchip: Support SPI_CS_HIGH
spi: rockchip: Support cs-gpio
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: add compatible string for rv1126
spi: spi-sun6i: Fix chipselect/clock bug
spi: dt-bindings: support devices with multiple chipselects
spi: add ancillary device support
spi: xilinx: convert to yaml
spi: convert Cadence SPI bindings to YAML
spi: stm32-qspi: Remove unused qspi field of struct stm32_qspi_flash
spi: add of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_probe
spi: meson-spicc: fix a wrong goto jump for avoiding memory leak.
...
The first fix solves an underflow in SoundWire platforms using the
max98373 amplifier, the rest of the patches are minor corrections in
machine drivers.
The fix should be queued for the 5.14 cycle, the rest should be
harmless but can be deferred for 5.15 if it's too late already.
Brent Lu (2):
ASoC: SOF: add a helper to get topology configured bclk
ASoC: Intel: sof_cs42l42: use helper function to get bclk frequency
Gongjun Song (1):
ASoC: Intel: soc-acpi: add support for SoundWire of TGL-H-RVP
Rander Wang (1):
ASoC: Intel: boards: fix xrun issue on platform with max98373
include/sound/sof.h | 1 +
sound/soc/intel/boards/sof_cs42l42.c | 8 +-
sound/soc/intel/boards/sof_sdw_max98373.c | 81 ++++++++++++-------
.../intel/common/soc-acpi-intel-tgl-match.c | 15 ++++
sound/soc/sof/sof-audio.c | 42 ++++++++--
5 files changed, 111 insertions(+), 36 deletions(-)
--
2.25.1
When starting the Halo core it is advised to also write the core reset
bit, this ensures the part starts up in the appropriate state. Omitting
this doesn't cause issues on most parts but cs40l25 requires it and
it is advised on all Halo parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210626155941.12251-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When wm_coeff_tlv_get was updated it was accidentally switch to the _raw
version of the helper causing it to ignore the current DSP state it
should be checking. Switch the code back to the correct helper so that
users can't read the controls when they arn't available.
Fixes: 73ecf1a673 ("ASoC: wm_adsp: Correct cache handling of new kernel control API")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210626155941.12251-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit dc98f1d we removed the zte zx sound drivers but there
was a dangling Kconfig left around for the codec so fix this.
Fixes: dc98f1d655 ("ASoC: remove zte zx drivers")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210627105955.3410015-1-pbrobinson@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On TGL platform with max98373 codec the trigger start sequence is
fe first, then codec component and sdw link is the last. Recently
a delay was introduced in max98373 codec driver and this resulted
to the start of sdw stream transmission was delayed and the data
transmitted by fw can't be consumed by sdw controller, so xrun happened.
Adding delay in trigger function is a bad idea. This patch enable spk
pin in prepare function and disable it in hw_free to avoid xrun issue
caused by delay in trigger.
Fixes: 3a27875e91 ("ASoC: max98373: Added 30ms turn on/off time delay")
BugLink: https://github.com/thesofproject/sof/issues/4066
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210625205042.65181-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP EliteBook 830 G8 Notebook PC using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625133414.26760-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The intent here is to return an error code if we don't find what we are
looking for in the 'list_for_each_entry()' loop.
's' is not NULL if the list is empty or if we scan the complete list.
Introduce a new 'found' variable to handle such cases.
Fixes: 60dd49298e ("ALSA: firewire-lib: handle several AMDTP streams in callback handler of IRQ target")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/9c9a53a4905984a570ba5672cbab84f2027dedc1.1624560484.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently IRQ_CLEAR register is marked as write-only, however using
regmap_update_bits on this register will have some side effects.
so mark IRQ_CLEAR register appropriately as readable and volatile.
Fixes: da0363f7bf ("ASoC: qcom: Fix for DMA interrupt clear reg overwriting")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210624092153.5771-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
One of the fixes reverted as part of the UMN fallout was actually fine,
however rather than undoing the revert the process that handled all this
stuff resulted in a patch which attempted to add extra error checks
instead. Unfortunately this new change wasn't really based on a good
understanding of the subsystem APIs and bypassed the usual patch flow
without ensuring it was reviewed by people with subsystem knowledge and
was merged as a fix rather than during the merge window.
The effect of the new fix is to upgrade what were previously warnings on
static data in the code to hard errors on that data. If this actually
happens then it would break existing systems, if it doesn't happen then
the change has no effect so this was not a safe change to apply as a fix
to the release candidates. Since the new code has not been tested and
doesn't in practice improve error handling revert it instead, and also
drop the original revert since the original fix was fine. This takes
the driver back to what it was in -rc1.
Fixes: 5e70b8e22b ("ASoC: rt5645: add error checking to rt5645_probe function")
Fixes: 1e0ce84215 ("Revert "ASoC: rt5645: fix a NULL pointer dereference")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
(cherry picked from commit 916cccb507)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDTZ30ACgkQJNaLcl1U
h9C5dQf6AjDh6y0SfB264cv2kSCLtYsOstSeamrEv3HBjqGiWEDgzfdB5Z+5d+EJ
ScWsfsZ8eMr7WcMZJ+wEGNKxcZO2uHEaC29dpNrDeE4Ffr9hsSucPhJ8Fm+K0qDH
VqX4kDPFY+OiuOf5RipDyAgoHo4zhIeaE9Rgxd4lbNH/xpWtgalN22iyYLpiYZLP
YJk+/8L37ZcKYX3uCImMEe4yseH3AFzGz7yi/tyyWCUP7GEwtWgzv2vadxewjY5E
h12ToqsTMQIrix0ZfMbYW9KJ7ANn6PFBz10vH8XuGbUlBW33pVzqP+Wr9adXGG4N
XLs6wRpbDbdJc3aDpDjA1nRlBl5XEg==
=h2+R
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.13-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Fixes for v5.13
A final batch of fixes for v5.13, this is larger than I'd like due to
the fixes for a series of suspend issues that Intel turned up in their
testing this week.
Hi,
this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.
kind regards,
Claudius
Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues
Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)
base-commit: 70585216fe
--
2.32.0
Make sure the HDA driver's display power reference is released during
shutdown/reboot.
During the shutdown/reboot sequence the pci device core calls the
pm_runtime_resume handler for all devices before calling the driver's
shutdown callback and so the HDA driver's runtime resume callback will
acquire a display power reference (on HSW/BDW). This triggers a power
reference held WARN on HSW/BDW in the i915 driver's subsequent shutdown
handler, which expects all display power references to be released by
that time.
Since the HDA controller is stopped in the shutdown handler in any case,
let's follow here the same sequence as the one during runtime suspend.
This will also reset the HDA link and drop the display power reference,
getting rid of the above WARN.
Tested on HSW.
v2:
- Fix the build for CONFIG_PM=n (Takashi)
- s/__azx_runtime_suspend/azx_shutdown_chip/
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3618
References: https://lore.kernel.org/lkml/cea1f9a-52e0-b83-593d-52997fe1aaf6@er-systems.de
Reported-and-tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20210623134601.2128663-1-imre.deak@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210617103141.1765-1-thunder.leizhen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds support for TAS2505 and TAS2521 to the tlv320aic32x4 driver.
The TAS2505 seems to be a stripped down version of the TLV320AIC32X4 so
it makes sense to handle them in the same driver.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-3-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
While this driver can already handle different device variants, the
variant information cannot be used in the driver code and therefor
cannot have different code paths depending on the device variant.
This change adds a `type` value into the `aic32x4_priv` structure, that
contains a device variant identifier, which was set when the driver was
bound to the device.
Signed-off-by: Claudius Heine <ch@denx.de>
Link: https://lore.kernel.org/r/20210617085230.1851503-2-ch@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enter suspend, the machine driver suspend callback
function will be called, then the cpu driver trigger callback
(SNDRV_PCM_TRIGGER_SUSPEND) be called, it would disable the
interrupt.
But the machine driver suspend and cpu dai driver suspend order
maybe changed, the cpu dai driver's suspend callback is called before
machine driver's suppend callback, then the interrupt is not cleared
successfully in trigger callback.
So need to clear interrupts in cpu dai driver's suspend callback
to avoid such issue.
Fixes: 9cb2b3796e ("ASoC: fsl_spdif: Add pm runtime function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1624365084-7934-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After further investigation, I find out some mistakes for 896 about its
register. This commit fixes it.
Fixes: b431f16f16 ("ALSA: firewire-motu: add support for MOTU 896")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
After further investigation, I find out some mistakes for 828 about its
register. This commit fixes it.
Fixes: d13d6b284d ("ALSA: firewire-motu: add support for MOTU 828")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has two similar helper functions for
source detection of sampling clock. This commit merges them as a code
refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has several similar helper functions
for packet format detection in protocol version 2.
This commit merges them as code refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Although MOTU Traveler supports AES/EBU source for sampling clock,
current implementation of driver doesn't code it.
This commit adds support for AES/EBU source in protocol version 2.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current implementation of driver has two similar helper functions for
source detection of sampling clock. This commit merges them as a code
refactoring.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The devices in protocol version 2 has a register with flag for IEC 60958
signal detection as source of sampling clock without discrimination
between coaxial and optical interfaces. On the other hand, current
implementation of driver manage to interpret type of signal on optical
interface instead.
This commit fixes the detection of optical/coaxial interface for S/PDIF
signal.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210623075941.72562-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For configuration items with a size of 16, scarlett2_usb_get_config()
was filling *buf with little-endian data. Update it to convert to CPU
endian. This function is not currently used so affects nothing yet;
will be used by the upcoming talkback feature.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cbc8b6eedd859dd27086ab4126d724a86dd50bcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 18i8 and 18i20 Gen 3 support "speaker switching". Add a Speaker
Switch control which can be set to Off/Main/Alt.
When speaker switching is enabled or disabled, the interface may
change the state of the Analog Outputs 3 and 4 routing and the global
mute button, so use a flag private->speaker_switching_switched to note
that those should be checked when the next "monitor other"
notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/874193a534cd0aeb6f2e108ae761cadd2dc25ad2.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enabling/disabling speaker switching will update the mux
configuration. To prepare for this, add a private->mux_updated flag
and update the scarlett2_mux_src_enum_ctl_get() callback to check it.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5ce3bb9fe4006b550d18c783c5ff640fe0bfbfcb.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Save the struct snd_kcontrol pointers for the sw_hw and mux controls.
This is in preparation for speaker switching support which needs to be
able to update those controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/269d89181bf29dbea80ba6f8cfff84fb23b77f86.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Split part of scarlett2_sw_hw_enum_ctl_put() out into
scarlett2_sw_hw_change() so that the code which actually makes the
change is available in its own function. This will be used by the
speaker switching support which needs to set the SW/HW switch to HW
when speaker switching is enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/f2cf91841ba067b490e7709bc4b14f4532b4ddd5.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Solo and 2i2 devices don't have a mixer but they do have a "direct
monitor" switch. Add support for getting and setting the state of this
switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61d23dc4feb3b046d870ad7203e66ff2bd1d278c.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models support software-selectable phantom power.
Add support for getting and setting the state of those switches and
the "Phantom Power Persistence" switch.
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/5837ce8a8c686560fc8f40b4204dd2a10721869b.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some inputs on Gen 3 models have an "air" feature which can be enabled
from the driver or (model-dependent) from the front panel. Add support
for getting and setting the state of those switches.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/44d448a4150b9c068754759c9fdd2bfe21484487.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add initial support for the Focusrite Scarlett Solo and 2i2 devices:
- They have no mixer
- They don't support reporting sync status or levels
- The configuration space is laid out differently to the other models
- There is no level (line/inst) switch on input 1 of the Solo
Co-developed-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/190b90f6f1f8f8d4dfb5f0a7761ff8ae5c40fdde.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Move scarlett2_usb_get() and scarlett2_usb_get_config() above the
functions relating to updating the configuration so that
scarlett2_usb_set_config() can call scarlett2_usb_get() in a
subsequent patch.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/1549f8e44548be679119f0b1462f888f4a03812d.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some models allow the level and pad settings to be controlled from the
front-panel of the device. For these, the device will send an
"input-other" notification to prompt the driver to re-read the status
of those settings.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/06289a7697455e96b7dbdfd2d384d4b20f8df6e0.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The current way of the scarlett2 mixer code managing the
usb_mixer_elem_info object is wrong in two ways: it passes its
internal index to the head.id field, and the val_type field is
uninitialized. This ended up with the wrong execution at the resume
because a bogus unit id is passed wrongly. Also, in the later code
extensions, we'll have more mixer elements, and passing the index will
overflow the unit id size (of 256).
This patch corrects those issues. It introduces a new value type,
USB_MIXER_BESPOKEN, which indicates a non-standard mixer element, and
use this type for all scarlett2 mixer elements, as well as
initializing the fixed unit id 0 for avoiding the overflow.
Tested-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/49721219f45b7e175e729b0d9d9c142fd8f4342a.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The scarlett2_ports struct contains both generic (hardware IDs and
descriptions) and model-specific (port count) data. Remove the generic
data from the scarlett2_device_info struct so it is not repeated for
every model.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/7a9e57e4e55a482390c692a9e60731d72b664a15.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some Gen 3 devices do not put all of the mux entries for the same port
types together in order in the "set mux" message data. To prepare for
this, replace the struct scarlett2_ports num[] array and the
assignment_order[] array with mux_assignment[], a list of port types
and ranges that is defined in the struct scarlett2_device_info.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/08e8d784d78262cb57496d28ef1ad7b6213a90ab.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For each analogue output, in addition to the output volume (gain)
control, the hardware also has a mute control. Add ALSA mute controls
for each analogue output.
If the device has the line_out_hw_vol feature, then the mute control
is disabled along with the output volume control when the switch is
set to HW.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/6fad82174b44633e46cfd96332a038de74d544f2.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the USB device ID to the scarlett2_device_info struct so that the
switch statement which finds the appropriate struct can be replaced
with a loop that looks through an array of pointers to those structs.
Suggested-by: Vladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/474c408c29fb280a611e47e49e59ca2fb9810d27.1624294591.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The copy_to_user() function returns the number of bytes remaining to be
copied. It doesn't return negatives.
Fixes: 66c8f75919 ("ALSA: hdsp: Fix assignment in if condition")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YNIzqpVR6L2t/RwJ@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().
hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().
Fix it by adding a check for the return value irq_id.
Signed-off-by: Jiajun Cao <jjcao20@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
alsa-ucm groups by driver name so fill that in as well. Otherwise the
presented information is redundant and doesn't reflect the used
driver. We can't just use 'asoc-simple-card' since the driver name is
restricted to 15 characters.
Before:
# cat /proc/asound/cards
0 [Devkit ]: Librem_5_Devkit - Librem 5 Devkit
Librem 5 Devkit
After:
0 [Devkit ]: simple-card - Librem 5 Devkit
Librem 5 Devkit
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Link: https://lore.kernel.org/r/YNGe3akAntQi8qJD@qwark.sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. of_node_put() on it before exiting
this function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210617032756.599359-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes below two uninitialized symbol warnings
warning:
sound/soc/codecs/wcd938x.c:2092 wcd938x_tx_swr_ctrl()
error: uninitialized symbol 'rate'
sound/soc/codecs/wcd938x.c:2189 wcd938x_tx_channel_config()
error: uninitialized symbol 'reg'.
First one my brining in check to already existing if condition and
second one by adding a default switch case to avoid any access to reg.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210621134502.19537-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes below
warning: unused variable wcd938x_dt_match
by placing device match table under CONFIG_OF
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210621134502.19537-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Kconfig documentation for SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH
is a bit misleading as it refers to a set of older platforms,
while in practise this machine driver supports all modern
Intel systems with Smart Sound Technology based DSP and HDA codecs.
Modify the Kconfig text to reflect current state.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we have a platform_device_id table, we can use
MODULE_DEVICE_TABLE to automatically generate the modalias. As a
result we can remove the manual insertion of MODULE_ALIAS.
Reported-by: Hulk Robot <hulkci@huawei.com>
Suggested-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following type of warnings:
sound/soc/intel/common/soc-acpi-intel-adl-match.c:34:24: error:
constant 0x000020025D071100 is so big it is long
Let's add the 'ull' suffix to make this go away and find real issues.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following warning:
sound/soc/intel/boards/sof_sdw.c:796:31: error: incorrect type in argument 6 (different signedness)
sound/soc/intel/boards/sof_sdw.c:796:31: expected int *group_id
sound/soc/intel/boards/sof_sdw.c:796:31: got unsigned int *
The group_id cannot be negative, use unsigned int.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following warning:
sound/soc/intel/boards/sof_da7219_max98373.c:438:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using 'mx' acronym for Maxim.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following warnings:
sound/soc/intel/boards/kbl_da7219_max98357a.c:647:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' acronym for Maxim.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse throws the following warning:
sound/soc/intel/boards/glk_rt5682_max98357a.c:622:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' acronym for Maxim
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Chromebooks machine driver aliases exceed 20 characters, which
leads to sparse warnings:
sound/soc/intel/boards/sof_rt5682.c:959:25: error: too long
initializer-string for array of char(no space for nul char)
sound/soc/intel/boards/sof_rt5682.c:989:25: error: too long
initializer-string for array of char(no space for nul char)
sound/soc/intel/boards/sof_rt5682.c:1039:25: error: too long
initializer-string for array of char(no space for nul char)
Fix by using the 'mx' shortcut for Maxim platforms (already used in
platform firmware)
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove support for using hdac_hdmi codec driver. No known products use
this configuration and hdac_hdmi cannot support all the platforms
sof_sdw does.
This change also fixes a bug in Kconfig rules.
SND_SOC_INTEL_SOUNDWIRE_SOF_MACH did not have a select SND_SOC_HDAC_HDMI
and this could cause build failures.
Reported-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On the reference boards, number of PCH dmics may vary and the number
should be taken from driver machine data. Remove the SOF_SDW_PCH_DMIC
quirk to make DMIC number configurable.
Fixes:d25bbe80485f8 ("ASoC: Intel: sof_sdw: add quirk for new ADL-P Rvp")
BugLink: https://github.com/thesofproject/sof/issues/4185
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210621194057.21711-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Updates for v5.14-rc1 are:
- Core has odd updates including improving clock stop codes, write api,
handling ENODATA etc
- Drivers has Big move of Intel driver to be aux dev and minor updates
to Intel/cadence driver
-----BEGIN PGP SIGNATURE-----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=JGCd
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.14-rc1
Updates for v5.14-rc1 are:
- Core has odd updates including improving clock stop codes, write api,
handling ENODATA etc
- Drivers has Big move of Intel driver to be aux dev and minor updates
to Intel/cadence driver
* tag 'soundwire-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Fix test for DP prepare complete
soundwire: bus: Make sdw_nwrite() data pointer argument const
soundwire: intel: move to auxiliary bus
soundwire: cadence: remove the repeated declaration
soundwire: dmi-quirks: remove duplicate initialization
soundwire: cadence_master: always set CMD_ACCEPT
soundwire: bus: add missing \n in dynamic debug
soundwire: bus: handle -ENODATA errors in clock stop/start sequences
soundwire: add missing kernel-doc description
soundwire: bus: only use CLOCK_STOP_MODE0 and fix confusions
soundwire: bandwidth allocation: improve error messages
soundwire/ASoC: add leading zeroes in peripheral device name
At extending the available mixer values for 32bit types, we forgot to
add the corresponding entries for the format dump in the proc output.
This may result in OOB access. Here adds the missing entries.
Fixes: bc18e31c30 ("ALSA: usb-audio: Fix parameter block size for UAC2 control requests")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622090647.14021-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hi Mark
These are v3 of parsing for daifmt.
I want to add new audio-graph-card2 sound card driver,
and this is last part of necessary soc-core cleanup for it.
Current some drivers are using DT, and then,
snd_soc_of_parse_daifmt() parses daifmt, but bitclock/frame provider
parsing part is one of headache, because we are assuming below both cases.
A) node {
bitclock-master;
frame-master;
...
};
B) link {
bitclock-master = <&xxx>;
frame-master = <&xxx>;
...
};
The original was style A), and style B) was added later.
snd_soc_of_parse_daifmt() parses A) style as original style,
and user need to update to B) style for clock_provider part if needed.
To handle it more flexibile, this patch-set adds new functions
which separates snd_soc_of_parse_daifmt() helper function.
snd_soc_daifmt_parse_format() : format part
snd_soc_daifmt_parse_clock_provider_as_flag() : clock part for style A)
snd_soc_daifmt_parse_clock_provider_as_phandl() : clock part for style B)
snd_soc_daifmt_parse_clock_provider_as_bitmap() : clock part use with _from_bitmap
v1 -> v2
- tidyup parse_clock_provider functions to _as_flag/phandle/bitmap()
- don't exchange code style on each drivers.
v2 -> v3
- use daifmt as much as possible (don't use daiclk) on each driver.
Link: https://lore.kernel.org/r/875yypdxlm.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87czsvdc4o.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (8):
ASoC: soc-core: add snd_soc_daifmt_clock_provider_from_bitmap()
ASoC: soc-core: add snd_soc_daifmt_clock_provider_fliped()
ASoC: soc-core: add snd_soc_daifmt_parse_format/clock_provider()
ASoC: atmel: switch to use snd_soc_daifmt_parse_format/clock_provider()
ASoC: fsl: switch to use snd_soc_daifmt_parse_format/clock_provider()
ASoC: meson: switch to use snd_soc_daifmt_parse_format/clock_provider()
ASoC: simple-card-utils: switch to use snd_soc_daifmt_parse_format/clock_provider()
ASoC: soc-core: remove snd_soc_of_parse_daifmt()
include/sound/soc.h | 21 ++++-
sound/soc/atmel/mikroe-proto.c | 9 ++-
sound/soc/fsl/fsl-asoc-card.c | 7 +-
sound/soc/generic/simple-card-utils.c | 16 ++--
sound/soc/meson/meson-card-utils.c | 6 +-
sound/soc/soc-core.c | 109 +++++++++++++++++---------
6 files changed, 106 insertions(+), 62 deletions(-)
--
2.25.1
There is an unhandled interrupt after suspend, which cause endless
interrupt when system resume, so system may hang.
Disable all interrupts in runtime suspend callback to avoid above
issue.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/1624019913-3380-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some boards use different circuits for jack detection.
This patch adds two modes as below
1. JD2/2 ports/external resister 100k
2. JD2/1 port/JD voltage 1.8V
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210617090822.16960-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210616091652.2552927-5-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210616091652.2552927-4-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210616091652.2552927-3-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_platform_get_and_ioremap_resource() to simplify
code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210616091652.2552927-2-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switch to use snd_soc_daifmt_parse_format/clock_provider() from
snd_soc_of_parse_daifmt().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871r95w9ch.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switch to use snd_soc_daifmt_parse_format/clock_provider() from
snd_soc_of_parse_daifmt().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/8735tlw9cy.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switch to use snd_soc_daifmt_parse_format/clock_provider() from
snd_soc_of_parse_daifmt().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874ke1w9dc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch switch to use snd_soc_daifmt_parse_format/clock_provider() from
snd_soc_of_parse_daifmt().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/875yyhw9e8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_of_parse_daifmt() parses daifmt, but bitclock/frame provider
parsing part is one of headacke, because we are assuming below both cases.
A) node {
bitclock-master;
frame-master;
...
};
B) link {
bitclock-master = <&xxx>;
frame-master = <&xxx>;
...
};
The original was style A), and style B) was added later
by commit b3ca11ff59 ("ASoC: simple-card: Move dai-link level
properties away from dai subnodes").
snd_soc_of_parse_daifmt() parses it as style A),
and user need to update it to style B) if needed.
To handle it more flexibile, this patch adds new functions
which separates snd_soc_of_parse_daifmt() helper function.
snd_soc_daifmt_parse_format() :for DAI format
snd_soc_daifmt_parse_clock_provider_as_flag() :for style A)
snd_soc_daifmt_parse_clock_provider_as_phandl() :for style B)
snd_soc_daifmt_parse_clock_provider_as_bitmap() :use with _from_bitmap
This means
snd_soc_of_parse_daifmt() ==
snd_soc_daifmt_parse_format() |
snd_soc_daifmt_parse_clock_provider_as_flag()
This patch also indicate relatesionship comment for
snd_soc_daifmt_clock_provider_from_bitmap().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877dixw9ej.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes we want to get CLOCK_PROVIDER fliped dai_fmt.
This patch adds new snd_soc_daifmt_clock_provider_fliped() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878s3dw9ex.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds snd_soc_daifmt_clock_provider_from_bitmap() function
to judge clock/frame master from its bitmap.
This is prepare for snd_soc_of_parse_daifmt() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6ntw9f5.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For both capture and playback streams to work at the same time, only the
needed values from a register need to be updated. Also, clocks should be
enabled only when the first stream is started and stopped when there is no
running stream.
Fixes: b543e467d1 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210618150741.401739-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The I2S needs to have the same sample bits for both capture and playback
streams.
Fixes: b543e467d1 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210618150741.401739-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the initial driver we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error. While we
did not see this IO error on RT711-sdca-based platforms, the code pattern
is similar to the RT700 case where the IO error was noted, so the fix
is added for consistency.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
The code is slightly different from the other codecs since the
interrupt callback deals with the SDCA interrupts, leading to a much
larger section that's protected by the mutex. The SoundWire interrupt
scheme requires a read after clearing a status, it's not clear from
the specifications what would happen if SDCA interrupts are disabled
in the middle of the sequence, so the entire interrupt status
read/write is kept as is, even if in the end we discard the
information.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 7ad4d237e7 ('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the initial driver we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error. While we
did not see this IO error on RT5682-based platforms, the code pattern
is similar to the RT700 case where the IO error was noted, so the fix
is added for consistency.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
The Fixes tag points to a 5.10 commit, there's no need to propagate
this change to earlier upstream versions.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 4a55000722 ('ASoC: codecs: rt*.c: remove useless pointer cast')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In previous commits we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error. While we
did not see this IO error on RT711-based platforms, the code pattern
is similar to the RT700 case where the IO error was noted, so the fix
is added for consistency.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 501ef01339 ('ASoC: rt711: wait for the delayed work to finish when the system suspends')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In previous commits we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 5f2df2a458 ('ASoC: rt700: wait for the delayed work to finish when the system suspends')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the hard-coded interface number and related constants for the
vendor-specific interface and look them up from the USB endpoint
descriptor.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164652.GA9237@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() and scarlett2_usb_get_config() were copying
struct scarlett2_config. Use a pointer instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164648.GA9231@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix mixer control callbacks to use the correct members of the struct
snd_ctl_elem_value. The use of value.integer and value.enumerated were
swapped in a few places.
Update scarlett2_mux_src_enum_ctl_put() to use min() instead of
clamp() as value.enumerated.item is unsigned.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164647.GA9226@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mixer control put callbacks should return 1 if the value is changed.
Fix the sw_hw, level, pad, and button controls accordingly.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164645.GA9221@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The private->vol_updated flag was being checked outside of the
mutex_lock/unlock() of private->data_mutex leading to the volume data
being fetched twice from the device unnecessarily or old volume data
being returned.
Update scarlett2_*_ctl_get() and include the private->vol_updated flag
check inside the critical region.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164643.GA9216@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add index temporary variable to scarlett2_mixer_ctl_put() for
consistency with the other *_ctl_put() functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164641.GA9211@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Rename struct scarlett2_mixer_data to struct scarlett2_data. A
less-wordy name is better because it is used everywhere, and although
this is a mixer driver, it also controls other vendor-specific
features.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164639.GA9206@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To match the vendor's terminology, change #defines, identifiers, and
comments:
- mute/dim/hardware buttons are now called dim/mute
- mixer status/interrupt is now notify
- vol is now monitor
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164636.GA9199@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The per-model button_count value was used to determine whether
dim/mute controls should be added, but these are present iff
line_out_hw_vol is true. Remove button_count and replace with
SCARLETT2_BUTTON_MAX and a check for line_out_hw_vol true.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164634.GA9193@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Just ignore instead of printing an error if the interrupt data is not
the expected length. This check was for development and the condition
has not been observed.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20210620164632.GA9186@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
