There is no need to provide anything but get_arch_dma_ops to
<linux/dma-mapping.h>. More the remaining declarations to <asm/iommu.h>
and drop all the includes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is no good reason for this helper, just opencode it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Just fold the calculation into __phys_to_dma/__dma_to_phys as those are
the only places that should know about it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Now that we've switched all the powerpc nommu and swiotlb methods to
use the generic dma_direct_* calls we can remove these ops vectors
entirely and rely on the common direct mapping bypass that avoids
indirect function calls entirely. This also allows to remove a whole
lot of boilerplate code related to setting up these operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Switch the streaming DMA mapping and ownership transfer methods to the
functionally identical dma_direct_ versions. Factor the cache
maintainance helpers into the form expected by the common code for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The generic code allows a few nice things such as node local allocations
and dipping into the CMA area. The lookup of the right zone for a given
dma mask works a little different, but the results should be the same.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The only user left is powerpc, but even there the generic dma-direct
version works just as well, given that we guarantee that the swiotlb
buffer must always be addressable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is largely identical to the generic version used
everywhere else. Replace it with the generic version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is identical to the generic dma_direct_get_required_mask,
except that the generic version also takes the bus_dma_mask account,
which could lead to incorrect results in the powerpc version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The coherent cache version of this function already is functionally
identicall to the default version, and by defining the
arch_dma_coherent_to_pfn hook the same is ture for the noncoherent
version as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the standard portable helper instead of the powerpc specific one,
which is about to go away.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of letting the architecture supply all of dma_set_mask just
give it an additional hook selected by Kconfig.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We need to compare the last byte in the dma range and not the one after it
for the bus_dma_mask, just like we do for the regular dma_mask. Fix this
cleanly by merging the two comparisms into one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The max_direct_dma_addr duplicates the bus_dma_mask field in struct
device. Use the generic field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pci_dma_dev_setup_swiotlb is only used by the fsl_pci code, and closely
related to it, so fsl_pci.c seems like a better place for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is only used by the Cell iommu code, which can keep track
if it is using the iommu internally just as good.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All iommu capable platforms now always use the iommu code with the
internal bypass, so there is not need for this magic anymore.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ppc_md and pci_controller_ops methods are unused now and can be
removed. The dma_nommu implementation is generic to the generic one
except for using max_pfn instead of calling into the memblock API,
and all other dma_map_ops instances implement a method of their own.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
These devices are not PCIe devices and do not have associated dma map
ops, so this is just dead code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This function is completely bogus - the fact that two PCIe devices come
from the same vendor has absolutely nothing to say about the DMA
capabilities and characteristics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If dart_init failed we didn't have a chance to setup dma or controller
ops yet, so there is no point in resetting them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This gets rid of a lot of clumsy code and finally allows us to mark
dma_iommu_ops const.
Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Configure the dma settings at device setup time, and stop playing games
with get_pci_dma_ops. This prepares for using the common dma_configure
code later on.
Includes fixes from Michael Ellerman.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the generic iommu bypass code instead of overriding set_dma_mask.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Call dma_get_required_mask_pSeriesLP directly instead of dma_iommu_ops
to simply the code a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new iommu_bypass flag to struct dev_archdata so that the dma_iommu
implementation can handle the direct mapping transparently instead of
switiching ops around. Setting of this flag is controlled by new
pci_controller_ops method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
vio_dma_mapping_ops currently does a lot of indirect calls through
dma_iommu_ops, which not only make the code harder to follow but are
also expensive in the post-spectre world. Unwind the indirect calls
by calling the ppc_iommu_* or iommu_* APIs directly applicable, or
just use the dma_iommu_* methods directly where we can.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If there is no ZONE_DMA32 we might need GFP_DMA to be able to
allocate memory that satisfies a 32-bit DMA mask.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pasemi driver never set a DMA mask, and given that the powerpc
DMA mapping routines never check it this worked ok so far. But the
generic dma-direct code which I plan to switch on for powerpc checks
the DMA mask and fails unsupported mapping requests, so we need to
make sure the proper 64-bit mask is set.
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In v4.20 we changed our pgd/pud_present() to check for _PAGE_PRESENT
rather than just checking that the value is non-zero, e.g.:
static inline int pgd_present(pgd_t pgd)
{
- return !pgd_none(pgd);
+ return (pgd_raw(pgd) & cpu_to_be64(_PAGE_PRESENT));
}
Unfortunately this is broken on big endian, as the result of the
bitwise & is truncated to int, which is always zero because
_PAGE_PRESENT is 0x8000000000000000ul. This means pgd_present() and
pud_present() are always false at compile time, and the compiler
elides the subsequent code.
Remarkably with that bug present we are still able to boot and run
with few noticeable effects. However under some work loads we are able
to trigger a warning in the ext4 code:
WARNING: CPU: 11 PID: 29593 at fs/ext4/inode.c:3927 .ext4_set_page_dirty+0x70/0xb0
CPU: 11 PID: 29593 Comm: debugedit Not tainted 4.20.0-rc1 #1
...
NIP .ext4_set_page_dirty+0x70/0xb0
LR .set_page_dirty+0xa0/0x150
Call Trace:
.set_page_dirty+0xa0/0x150
.unmap_page_range+0xbf0/0xe10
.unmap_vmas+0x84/0x130
.unmap_region+0xe8/0x190
.__do_munmap+0x2f0/0x510
.__vm_munmap+0x80/0x110
.__se_sys_munmap+0x14/0x30
system_call+0x5c/0x70
The fix is simple, we need to convert the result of the bitwise & to
an int before returning it.
Thanks to Erhard, Jan Kara and Aneesh for help with debugging.
Fixes: da7ad366b4 ("powerpc/mm/book3s: Update pmd_present to look at _PAGE_PRESENT bit")
Cc: stable@vger.kernel.org # v4.20+
Reported-by: Erhard F. <erhard_f@mailbox.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The IODA reset is used to flush out any OS controlled state from the PHB.
This reset can fail if a PHB fatal error has occurred in early boot,
probably due to a because of a bad device. We already do a fundemental
reset of the device in some cases, so this patch just adds a test to force
a full reset if firmware reports an error when performing the IODA reset.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
'regno' is directly controlled by user space, hence leading to a potential
exploitation of the Spectre variant 1 vulnerability.
On PTRACE_SETREGS and PTRACE_GETREGS requests, user space passes the
register number that would be read or written. This register number is
called 'regno' which is part of the 'addr' syscall parameter.
This 'regno' value is checked against the maximum pt_regs structure size,
and then used to dereference it, which matches the initial part of a
Spectre v1 (and Spectre v1.1) attack. The dereferenced value, then,
is returned to userspace in the GETREGS case.
This patch sanitizes 'regno' before using it to dereference pt_reg.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When building a 32 bit powerpc kernel with Binutils 2.31.1 this warning
is emitted:
powerpc-linux-gnu-ld: warning: orphan section `.branch_lt' from
`arch/powerpc/kernel/head_44x.o' being placed in section `.branch_lt'
As of binutils commit 2d7ad24e8726 ("Support PLT16 relocs against local
symbols")[1], 32 bit targets can produce .branch_lt sections in their
output.
Include these symbols in the .data section as the ppc64 kernel does.
[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=2d7ad24e8726ba4c45c9e67be08223a146a837ce
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Alan Modra <amodra@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, eeh_pe_reset_full() will only attempt to reset a PE more
than once if activating the reset state and deactivating it both
succeed, but later polling shows that it hasn't become active.
Change this so that it will try up to three times for any reason other
than an unrecoverable slot error and adjust the message generation so
that it's clear weather the reset has ultimately succeeded or failed.
This allows the reset to succeed in some situations where it would
currently fail.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, the EEH recovery process considers passed-through devices
as if they were not EEH-aware, which can cause them to be removed as
part of recovery. Because device removal requires cooperation from
the guest, this may lead to the process stalling or deadlocking.
Also, if devices are removed on the host side, they will be removed
from their IOMMU group, making recovery in the guest impossible.
Therefore, alter the recovery process so that passed-through devices
are not removed but are instead left frozen (and marked isolated)
until the guest performs it's own recovery. If firmware thaws a
passed-through PE because it's parent PE has been thawed (because it
was not passed through), re-freeze it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a parameter to eeh_clear_pe_frozen_state() that allows
passed-through PEs to be excluded. Update callers to always pass true
so that there is no change in behaviour.
This is to prepare for follow-up work for passed-through devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a parameter to eeh_pe_state_clear() that allows passed-through PEs
to be excluded. Update callers to always pass true so that there is no
change in behaviour.
Also refactor to use direct traversal, to allow the removal of some
boilerplate.
This is to prepare for follow-up work for passed-through devices.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
eeh_unfreeze_pe() performs two operations: unfreezing a PE (which may
cause firmware to unfreeze child PEs as well) and de-isolating the PE
and it's children.
To simplify this and support future work, separate out the
de-isolation and perform it at the call sites (when necessary).
There should be no change in behaviour.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The 'clear_sw_state' parameter for eeh_pe_clear_frozen_state() is
redundant because it has no effect (except in the rare case of a
hardware error part way through unfreezing a tree of PEs, where it
would dangerously allow partial de-isolation before returning
failure).
It is passed down to __eeh_pe_clear_frozen_state(), and from there to
eeh_unfreeze_pe(), where it causes EEH_PE_ISOLATED to be removed
from the state of each PE during the traversal. However, when the
traversal finishes, EEH_PE_ISOLATED is unconditionally removed by a
call to eeh_pe_state_clear() regardless of the parameter's value.
So remove the flag and pass false to eeh_unfreeze_pe() (to avoid the
rare case described above, as it was before the flag was introduced).
Also, perform the recursion directly in the function and eliminate a
bit of boilerplate.
There should be no change in functionality, except as mentioned above.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since commit c40dd2f766 ("powerpc: Add System RAM to /proc/iomem")
it is possible to use the generic walk_system_ram_range() and
the generic page_is_ram().
To enable the use of walk_system_ram_range() by the IBM EHEA ethernet
driver, we still need an export of the generic function.
As powerpc was the only user of CONFIG_ARCH_HAS_WALK_MEMORY, the
ifdef around the generic walk_system_ram_range() has become useless
and can be dropped.
Fixes: c40dd2f766 ("powerpc: Add System RAM to /proc/iomem")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: Keep the EXPORT_SYMBOL_GPL in powerpc code]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the static keyword around to remove the following warnings (W=1):
arch/powerpc/platforms/ps3/os-area.c:212:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
arch/powerpc/platforms/ps3/system-bus.c:45:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There is not point in having a trailing semicolon after a closing curly
brace. Remove it.
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Enable kernel XZ compression option on 44x.
Tested on a Western Digital - MyBook Live NAS.
It takes 22 seconds for the 800 MHz CPU to decompress
and boot a 2.63 MiB XZ-compressed kernel simpleImage.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When binding an SCM volume to a physical address the hypervisor has the
option to return early with a continue token with the expectation that
the guest will resume the bind operation until it completes. A quirk of
this interface is that the bind address will only be returned by the
first bind h-call and the subsequent calls will return
0xFFFF_FFFF_FFFF_FFFF for the bind address.
We currently do not save the address returned by the first h-call. As a
result we will use the junk address as the base of the bound region if
the hypervisor decides to split the bind across multiple h-calls. This
bug was found when testing with very large SCM volumes where the bind
process would take more time than they hypervisor's internal h-call time
limit would allow. This patch fixes the issue by saving the bind address
from the first call.
Cc: stable@vger.kernel.org
Fixes: b5beae5e22 ("powerpc/pseries: Add driver for PAPR SCM regions")
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
With support for split pmd lock, we use pmd page pmd_huge_pte pointer
to store the deposited page table. In those config when we move page
tables we need to make sure we move the deposited page table to the
correct pmd page. Otherwise this can result in crash when we withdraw
of deposited page table because we can find the pmd_huge_pte NULL.
eg:
__split_huge_pmd+0x1070/0x1940
__split_huge_pmd+0xe34/0x1940 (unreliable)
vma_adjust_trans_huge+0x110/0x1c0
__vma_adjust+0x2b4/0x9b0
__split_vma+0x1b8/0x280
__do_munmap+0x13c/0x550
sys_mremap+0x220/0x7e0
system_call+0x5c/0x70
Fixes: 675d995297 ("powerpc/book3s64: Enable split pmd ptlock.")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
