cap_rss_ctx_supported was created because the API for creating
and configuring additional contexts is mux'ed with the normal
RSS API. Presence of ops does not imply driver can actually
support rss_context != 0 (in fact drivers mostly ignore that
field). cap_rss_ctx_supported lets core check that the driver
is context-aware before calling it.
Now that we have .create_rxfh_context, there is no such
ambiguity. We can depend on presence of the op.
Make setting the bit optional.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 24ac7e5440 ("ethtool: use the rss context XArray
in ring deactivation safety-check") core will prevent queues from
being disabled while being used by additional RSS contexts.
The safety check is no longer necessary, and core will do a more
accurate job of only rejecting changes which can actually break
things.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the separate create/modify/delete ops for RSS.
No problems with IDs - even tho RSS tables are per device
the driver already seems to allocate IDs linearly per port.
There's a translation table from per-port context ID
to device context ID.
mvpp2 doesn't have a key for the hash, it defaults to
an empty/previous indir table.
Note that there is no key at all, so we don't have to be
concerned with reporting the wrong one (which is addressed
by a patch later in the series).
Compile-tested only.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include the "name" of the context in the comment for traffic
checks. Makes it easier to reason about which context failed
when we loop over 32 contexts (it may matter if we failed in
first vs last, for example).
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable "did_rsc" is initialized twice, which is unnecessary. Just
remove one of them.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simpler and allows avoiding manual pointer addition.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to respect the 80 columns limit, split the half-duplex
monitoring function in two.
This is just a styling change, no functional change.
Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: phylib: fix fixed-speed >= 1G
This is v2 of the patch (now patches) adding support for ethtool
!autoneg while respecting the requirements of IEEE 802.3.
v2 fixes the build errors in the previous patch by first constifying
the "advertisement" argument to the linkmode functions that only
read from this pointer. It also fixes the incorrectly named
linkmode_set function.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have an increasing number of drivers that are forcing
auto-negotiation to be enabled for speeds of 1G or faster.
It would appear that auto-negotiation is mandatory for speeds above
100M. In 802.3, Annex 40C's state diagrams seems to imply that
mr_autoneg_enable (BMCR AN ENABLE) doesn't affect whether or not the
AN state machines work for 1000base-T, and some PHY datasheets (e.g.
Marvell Alaska) state that disabling mr_autoneg_enable leaves AN
enabled but forced to 1G full duplex.
Other PHY datasheets imply that BMCR AN ENABLE should not be cleared
for >= 1G.
Thus, this should be handled in phylib rather than in each driver.
Rather than erroring out, arrange to implement the Marvell Alaska
solution but in software for all PHYs: generate an appropriate
single-speed advertisement for the requested speed, and keep AN
enabled to the PHY driver. However, to avoid userspace API breakage,
continue to report to userspace that we have AN disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Constify the advertising mask to linkmode functions that only read from
the advertising mask.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Javier Carrasco says:
====================
net: mvpp2: rework child node/port removal handling
These two patches used to be part of another series [1] that did not
apply to the networking tree without conflicts. This is therefore just a
partial resend with no code modifications, just rebased onto net/main.
Link: https://lore.kernel.org/all/20240806181026.5fe7f777@kernel.org/ [1]
====================
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
The child nodes within mvpp2_probe are not accessed outside the loops,
and the scoped version of the macro can be used to automatically
decrement the refcount on early exits.
Use `device_for_each_child_node()` and its scoped variant to indicate
device's direct child nodes.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in [1], there is no need to iterate over child nodes to
remove the list of ports. Instead, a loop up to `port_count` ports can
be used, and is in fact more reliable in case the child node
availability changes.
The suggested approach removes the need for the `fwnode` and
`port_fwnode` variables in mvpp2_remove() as well.
Link: https://lore.kernel.org/all/ZqdRgDkK1PzoI2Pf@shell.armlinux.org.uk/ [1]
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Wei says:
====================
fix bnxt_en queue reset when queue is active
The current bnxt_en queue API implementation is buggy when resetting a
queue that has active traffic. The problem is that there is no FW
involved to stop the flow of packets and relying on napi_disable() isn't
enough.
To fix this, call bnxt_hwrm_vnic_update() with MRU set to 0 for both the
default and the ntuple vnic to stop the flow of packets. This works for
any Rx queue and not only those that have ntuple rules since every Rx
queue is either in the default or the ntuple vnic.
For bnxt_hwrm_vnic_update() to work, proper flushing must be done by the
FW. A FW flag is there to indicate support and queue_mgmt_ops is keyed
behind this.
The first three patches are from Michael Chan and adds the prerequisite
vnic functions and FW flags indicating that it will properly flush
during vnic update.
Tested on BCM957504 while iperf3 is active:
1. Reset a queue that has an ntuple rule steering flow into it
2. Reset all queues in order, one at a time
In both cases the flow is not interrupted.
Sending this to net-next as there is no in-tree kernel consumer of queue
API just yet, and there is a patch that changes when the queue_mgmt_ops
is registered.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
---
v3:
- include patches from Michael Chan that adds a FW flag for vnic flush
capability
- key support for queue_mgmt_ops behind this new flag
v2:
- split setting vnic->mru into a separate patch (Wojciech)
- clarify why napi_enable()/disable() is removed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The queue API calls bnxt_hwrm_vnic_update() to stop/start the flow of
packets, which can only properly flush the pipeline if FW indicates
support.
Add a macro BNXT_SUPPORTS_QUEUE_API that checks for the required flags
and only set queue_mgmt_ops if true.
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation when resetting a queue while packets are
flowing puts the queue into an inconsistent state.
There needs to be some synchronisation with the FW. Add calls to
bnxt_hwrm_vnic_update() to set the MRU for both the default and ntuple
vnic during queue start/stop. When the MRU is set to 0, flow is stopped.
Each Rx queue belongs to either the default or the ntuple vnic.
With calling bnxt_hwrm_vnic_update() the calls to napi_enable() and
napi_disable() must be removed for reset to work on a queue that has
active traffic flowing e.g. iperf3.
Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set the newly added vnic->mru field in bnxt_hwrm_vnic_cfg().
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check the HWRM_VNIC_QCAPS FW response for the receive engine flush
capability. This capability indicates that we can reliably support
RX ring restart when calling HWRM_VNIC_UPDATE with MRU set to 0.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the function bnxt_hwrm_vnic_update() to call FW to update
a VNIC. This call can be used when disabling and enabling a
receive ring within a VNIC. The mru which is the maximum receive
size of packets received by the VNIC can be updated.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The main changes are:
1. HWRM_VNIC_UPDATE used to safely disable and enable an RX ring within
the VNIC.
2. New flag in HWRM_VNIC_QCAPS to indicate FW will do the proper flush
during HWRM_VNIC_UPDATE.
3. New flag in HWRM_FUNC_QCAPS to indicate that reservations for some
resources such as VNIC can be reduced.
4. New backing store memory types not used by the driver yet.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
James Chapman says:
====================
l2tp: misc improvements
This series makes several improvements to l2tp:
* update documentation to be consistent with recent l2tp changes.
* move l2tp_ip socket tables to per-net data.
* fix handling of hash key collisions in l2tp_v3_session_get
* implement and use get-next APIs for management and procfs/debugfs.
* improve l2tp refcount helpers.
* use per-cpu dev->tstats in l2tpeth devices.
* fix a lockdep splat.
* fix a race between l2tp_pre_exit_net and pppol2tp_release.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot exposes a race where a net used by l2tp is removed while an
existing pppol2tp socket is closed. In l2tp_pre_exit_net, l2tp queues
TUNNEL_DELETE work items to close each tunnel in the net. When these
are run, new SESSION_DELETE work items are queued to delete each
session in the tunnel. This all happens in drain_workqueue. However,
drain_workqueue allows only new work items if they are queued by other
work items which are already in the queue. If pppol2tp_release runs
after drain_workqueue has started, it may queue a SESSION_DELETE work
item, which results in the warning below in drain_workqueue.
Address this by flushing the workqueue before drain_workqueue such
that all queued TUNNEL_DELETE work items run before drain_workqueue is
started. This will queue SESSION_DELETE work items for each session in
the tunnel, hence pppol2tp_release or other API requests won't queue
SESSION_DELETE requests once drain_workqueue is started.
WARNING: CPU: 1 PID: 5467 at kernel/workqueue.c:2259 __queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Modules linked in:
CPU: 1 UID: 0 PID: 5467 Comm: syz.3.43 Not tainted 6.11.0-rc1-syzkaller-00247-g3608d6aca5e7 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:__queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Code: ff e8 11 84 36 00 90 0f 0b 90 e9 1e fd ff ff e8 03 84 36 00 eb 13 e8 fc 83 36 00 eb 0c e8 f5 83 36 00 eb 05 e8 ee 83 36 00 90 <0f> 0b 90 48 83 c4 60 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc
RSP: 0018:ffffc90004607b48 EFLAGS: 00010093
RAX: ffffffff815ce274 RBX: ffff8880661fda00 RCX: ffff8880661fda00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff815cd6d4 R09: 0000000000000000
R10: ffffc90004607c20 R11: fffff520008c0f85 R12: ffff88802ac33800
R13: ffff88802ac339c0 R14: dffffc0000000000 R15: 0000000000000008
FS: 00005555713eb500(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000001eda6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
queue_work_on+0x1c2/0x380 kernel/workqueue.c:2392
pppol2tp_release+0x163/0x230 net/l2tp/l2tp_ppp.c:445
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f061e9779f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff1c1fce8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 000000000001017d RCX: 00007f061e9779f9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007ffff1c1fdc0 R08: 0000000000000001 R09: 00007ffff1c1ffcf
R10: 00007f061e800000 R11: 0000000000000246 R12: 0000000000000032
R13: 00007ffff1c1fde0 R14: 00007ffff1c1fe00 R15: ffffffffffffffff
</TASK>
Fixes: fc7ec7f554 ("l2tp: delete sessions using work queue")
Reported-by: syzbot+0e85b10481d2f5478053@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0e85b10481d2f5478053
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_eth uses old-style dev->stats for fastpath packet/byte
counters. Convert it to use dev->tstats per-cpu counters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_inc_refcount and l2tp_session_inc_refcount wrap
refcount_inc. They add no value so just use the refcount APIs directly
and drop l2tp's helpers. l2tp already uses refcount_inc_not_zero
anyway.
Rename l2tp_tunnel_dec_refcount and l2tp_session_dec_refcount to
l2tp_tunnel_put and l2tp_session_put to better match their use pairing
various _get getters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp netlink and procfs/debugfs iterate over tunnel and session lists
to obtain data. They currently use very inefficient get_nth functions
to do so. Replace these with get_next.
For netlink, use nl cb->ctx[] for passing state instead of the
obsolete cb->args[].
l2tp_tunnel_get_nth and l2tp_session_get_nth are no longer used so
they can be removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp management APIs and procfs/debugfs iterate over l2tp tunnel and
session lists. Since these lists are now implemented using IDR, we can
use IDR get_next APIs to iterate them. Add tunnel/session get_next
functions to do so.
The session get_next functions get the next session in a given tunnel
and need to account for l2tpv2 and l2tpv3 differences:
* l2tpv2 sessions are keyed by tunnel ID / session ID. Iteration for
a given tunnel ID, TID, can therefore start with a key given by
TID/0 and finish when the next entry's tunnel ID is not TID. This
is possible only because the tunnel ID part of the key is the upper
16 bits and the session ID part the lower 16 bits; when idr_next
increments the key value, it therefore finds the next sessions of
the current tunnel before those of the next tunnel. Entries with
session ID 0 are always skipped because they are used internally by
pppol2tp.
* l2tpv3 sessions are keyed by session ID. Iteration starts at the
first IDR entry and skips entries where the tunnel does not
match. Iteration must also consider session ID collisions and walk
the list of colliding sessions (if any) for one which matches the
supplied tunnel.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To handle colliding l2tpv3 session IDs, l2tp_v3_session_get searches a
hashed list keyed by ID and sk. Although unlikely, if hash keys
collide, it is possible that hash_for_each_possible loops over a
session which doesn't have the ID that we are searching for. So check
for session ID match when looping over possible hash key matches.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_ip[6] have always used global socket tables. It is therefore not
possible to create l2tpip sockets in different namespaces with the
same socket address.
To support this, move l2tpip socket tables to pernet data.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update l2tp to remove the inline keyword from several functions in C
sources, since this is now discouraged.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp no longer uses sk_user_data in tunnel sockets and now manages
tunnel/session lifetimes slightly differently. Update docs to cover
this.
CC: linux-doc@vger.kernel.org
CC: corbet@lwn.net
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tariq Toukan says:
====================
mlx5 misc patches 2024-08-08
This patchset contains multiple enhancements from the team to the mlx5
core and Eth drivers.
Patch #1 by Chris bumps a defined value to permit more devices doing TC
offloads.
Patch #2 by Jianbo adds an IPsec fast-path optimization to replace the
slow async handling.
Patches #3 and #4 by Jianbo add TC offload support for complicated rules
to overcome firmware limitation.
Patch #5 by Gal unifies the access macro to advertised/supported link
modes.
Patches #6 to #9 by Gal adds extack messages in ethtool ops to replace
prints to the kernel log.
Patch #10 by Cosmin switches to using 'update' verb instead of 'replace'
to better reflect the operation.
Patch #11 by Cosmin exposes an update connection tracking operation to
replace the assumed delete+add implementaiton.
====================
Link: https://patch.msgid.link/20240808055927.2059700-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously, replacing a connection tracking steering entry was done by
adding a new rule (with the same tag but possibly different mod hdr
actions/labels) then removing the old rule.
This approach doesn't work in hardware steering because two steering
entries with the same tag cannot coexist in a hardware steering table.
This commit prepares for that by adding a new ct_rule_update operation on
the ct_fs_ops struct which is used instead of add+delete.
Implementations for both dmfs (firmware steering) and smfs (software
steering) are provided, which simply add the new rule and delete the old
one.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-12-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Offloaded rules can be updated with a new modify header action
containing a changed restore cookie. This was done using the verb
'replace', while in some configurations 'update' is a better fit.
This commit renames the functions used to reflect that.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-11-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors in get module eeprom by page, reflect it through
extack instead of a dmesg print.
While at it, make the messages more human friendly.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-10-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors in set coalesce, reflect it through extack instead of
a dmesg print.
While at it, make the messages more human friendly.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors in get coalesce, reflect it through extack instead of
a dmesg print.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of errors in set ringparams, reflect it through extack instead
of a dmesg print.
While at it, make the messages more human friendly and remove two
redundant checks that are already validated by the core.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the bitmap operations when accessing the advertised/supported link
modes and remove places that access them as arrays of unsigned longs
(underlying implementation of the bitmap), this makes the code much more
readable and clear.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware has the limitation that it cannot offload a rule with rewrite
and mirror to internal and external destinations simultaneously.
This patch adds a workaround to this issue. Here the destination array
is split again, just like what's done in previous commit, but after
the action indexed by split_count - 1. An extra rule is added for the
leftover destinations. Such rule can be offloaded, even there are
destinations to both internal and external destinations, because the
header rewrite is left in the original FTE.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To offload the encap rule when the tunnel IP is configured on an
openvswitch internal port, driver need to overwrite vport metadata in
reg_c0 to the value assigned to the internal port, then forward
packets to root table to be processed again by the rules matching on
the metadata for such internal port.
When such rule is combined with header rewrite and mirror, openvswitch
generates the rule like the following, because it resets mirror after
packets are modified.
in_port(enp8s0f0npf0sf1),..,
actions:enp8s0f0npf0sf2,set(tunnel(...)),set(ipv4(...)),vxlan_sys_4789,enp8s0f0npf0sf2
The split_count was introduced before to support rewrite and mirror.
Driver splits the rule into two different hardware rules in order to
offload it. But it's not enough to offload the above complicated rule
because of the limitations, in both driver and firmware.
To resolve this issue, the destination array is split again after the
destination indexed by split_count. An extra rule is added for the
leftover destinations (in the above example, it is enp8s0f0npf0sf2),
and is inserted to post_act table. And the extra destination is added
in the original rule to forward to post_act table, so the extra mirror
is done there.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the commit a2a73ea14b ("net/mlx5e: Don't listen to remove flows
event"), remove_flow_enable event is removed, and the hard limit
usually relies on software mechanism added in commit b2f7b01d36
("net/mlx5e: Simulate missing IPsec TX limits hardware
functionality"). But the delayed work is rescheduled every one second,
which is slow for fast traffic. As a result, traffic can't be blocked
even reaches the hard limit, which usually happens when soft and hard
limits are very close.
In reality it won't happen because soft limit is much lower than hard
limit. But, as an optimization for RX to block traffic when reaching
hard limit, need to set remove_flow_enable. When remove flow is
enabled, IPSEC HARD_LIFETIME ASO syndrome will be set in the metadata
defined in the ASO return register if packets reach hard lifetime
threshold. And those packets are dropped immediately by the steering
table.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently MLX5E_TC_MAX_INT_PORT_NUM is 8. Usually int port has one
ingress and one egress rules. But sometimes, a temporary rule can be
offloaded as well, eg:
recirc_id(0),in_port(br-phy),eth(src=10:70:fd:87:57:c0,dst=33:33:00:00:00:16),
eth_type(0x86dd),ipv6(frag=no), packets:2, bytes:180, used:0.060s,
actions:enp8s0f0
If one int port device offloads 3 rules, only 2 devices can offload.
Other devices will hit the limit and fail to offload. Actually it is
insufficient for customers. So increase the number to 32.
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20240808055927.2059700-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
f1294617d2 removed the custom function for
ndo_eth_ioctl and used the standard phy_do_ioctl which calls
phy_mii_ioctl. However since then, this driver was ported to phylink
where it makes more sense to call phylink_mii_ioctl.
Bring back custom function that calls phylink_mii_ioctl.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240807215834.33980-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During initialization with the vnic server, a bitstring is communicated
to the client regarding header info needed during CSO (See "VNIC
Capabilities" in PAPR). Most of the time, to be safe, vnic server
requests header info for CSO. When header info is needed, multiple TX
descriptors are required per skb; This limits the driver to use
send_subcrq_indirect instead of send_subcrq_direct.
Previously, the vnic server request for header info was ignored. This
allowed the use of send_sub_crq_direct. Transmissions were successful
because the bitstring returned by vnic server is broad and over
cautionary. It was observed that mlx backing devices could actually
transmit and handle CSO packets without the vnic server receiving
header info (despite the fact that the bitstring requested it).
There was a trust issue: The bitstring was overcautionary. This extra
precaution (requesting header info when the backing device may not use
it) comes at the cost of performance (using direct vs indirect hcalls
has a 30% delta in small packet RR transaction rate). So it has been
requested that the vnic server team tries to ensure that the bitstring
is more exact. In the meantime, disable CSO when it is possible to use
the skb in the send_subcrq_direct path. In other words, calculate the
checksum before handing the packet to FW when the packet is not
segmented and xmit_more is false.
Since the code path is only possible if the skb is non GSO and xmit_more
is false, the cost of doing checksum in the send_subcrq_direct path is
minimal. Any large segmented skb will have xmit_more set to true more
frequently and it is inexpensive to do checksumming on a small skb.
The worst-case workload would be a 9000 MTU TCP_RR test with close
to MTU sized packets (and TSO off). This allows xmit_more to be false
more frequently and open the code path up to use send_subcrq_direct.
Observing trace data (graph-time = 1) and packet rate with this workload
shows minimal performance degradation:
1. NIC does checksum w headers, safely use send_subcrq_indirect:
- Packet rate: 631k txs
- Trace data:
ibmvnic_xmit = 44344685.87 us / 6234576 hits = AVG 7.11 us
skb_checksum_help = 4.07 us / 2 hits = AVG 2.04 us
^ Notice hits, tracing this just for reassurance
ibmvnic_tx_scrq_flush = 33040649.69 us / 5638441 hits = AVG 5.86 us
send_subcrq_indirect = 37438922.24 us / 6030859 hits = AVG 6.21 us
2. NIC does checksum w/o headers, dangerously use send_subcrq_direct:
- Packet rate: 831k txs
- Trace data:
ibmvnic_xmit = 48940092.29 us / 8187630 hits = AVG 5.98 us
skb_checksum_help = 2.03 us / 1 hits = AVG 2.03
ibmvnic_tx_scrq_flush = 31141879.57 us / 7948960 hits = AVG 3.92 us
send_subcrq_indirect = 8412506.03 us / 728781 hits = AVG 11.54
^ notice hits is much lower b/c send_subcrq_direct was called
^ wasn't traceable
3. driver does checksum, safely use send_subcrq_direct (THIS PATCH):
- Packet rate: 829k txs
- Trace data:
ibmvnic_xmit = 56696077.63 us / 8066168 hits = AVG 7.03 us
skb_checksum_help = 8587456.16 us / 7526072 hits = AVG 1.14 us
ibmvnic_tx_scrq_flush = 30219545.55 us / 7782409 hits = AVG 3.88 us
send_subcrq_indirect = 8638326.44 us / 763693 hits = AVG 11.31 us
When the bitstring ever specifies that CSO does not require headers
(dependent on VIOS vnic server changes), then this patch should be
removed and replaced with one that investigates the bitstring before
using send_subcrq_direct.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-8-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Byte Queue Limits depends on dql_completed being called once per tx
completion round in order to adjust its algorithm appropriately. The
dql->limit value is an approximation of the amount of bytes that the NIC
can consume per irq interval. If this approximation is too high then the
NIC will become over-saturated. Too low and the NIC will starve.
The dql->limit depends on dql->prev-* stats to calculate an optimal
value. If dql_completed() is called more than once per irq handler then
those prev-* values become unreliable (because they are not an accurate
representation of the previous state of the NIC) resulting in a
sub-optimal limit value.
Therefore, move the call to netdev_tx_completed_queue() to the end of
ibmvnic_complete_tx().
When performing 150 sessions of TCP rr (request-response 1 byte packets)
workloads, one could observe:
PREVIOUSLY: - limit and inflight values hovering around 130
- transaction rate of around 750k pps.
NOW: - limit rises and falls in response to inflight (130-900)
- transaction rate of around 1M pps (33% improvement)
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-7-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware supports two hcalls to send a sub-crq request:
H_SEND_SUB_CRQ_INDIRECT and H_SEND_SUB_CRQ. The indirect hcall allows
for submission of batched messages while the other hcall is limited to
only one message. This protocol is defined in PAPR section 17.2.3.3.
Previously, the ibmvnic xmit function only used the indirect hcall. This
allowed the driver to batch it's skbs. A single skb can occupy a few
entries per hcall depending on if FW requires skb header information or
not. The FW only needs header information if the packet is segmented.
By this logic, if an skb is not GSO then it can fit in one sub-crq
message and therefore is a candidate for H_SEND_SUB_CRQ.
Batching skb transmission is only useful when there are more packets
coming down the line (ie netdev_xmit_more is true).
As it turns out, H_SEND_SUB_CRQ induces less latency than
H_SEND_SUB_CRQ_INDIRECT. Therefore, use H_SEND_SUB_CRQ where
appropriate.
Small latency gains seen when doing TCP_RR_150 (request/response
workload). Ftrace results (graph-time=1):
Previous:
ibmvnic_xmit = 29618270.83 us / 8860058.0 hits = AVG 3.34
ibmvnic_tx_scrq_flush = 21972231.02 us / 6553972.0 hits = AVG 3.35
Now:
ibmvnic_xmit = 22153350.96 us / 8438942.0 hits = AVG 2.63
ibmvnic_tx_scrq_flush = 15858922.4 us / 6244076.0 hits = AVG 2.54
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-6-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previously when creating the header descriptors, the driver would:
1. allocate a temporary buffer on the stack (in build_hdr_descs_arr)
2. memcpy the header info into the temporary buffer (in build_hdr_data)
3. memcpy the temp buffer into a local variable (in create_hdr_descs)
4. copy the local variable into the return buffer (in create_hdr_descs)
Since, there is no opportunity for errors during this process, the temp
buffer is not needed and work can be done on the return buffer directly.
Repurpose build_hdr_data() to only calculate the header lengths. Rename
it to get_hdr_lens().
Edit create_hdr_descs() to read from the skb directly and copy directly
into the returned useful buffer.
The process now involves less memory and write operations while
also being more readable.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-4-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the header length helper functions rather than trying to calculate
it within the driver. There are defined functions for mac and network
headers (skb_mac_header_len and skb_network_header_len) but no such
function exists for the transport header length.
Also, hdr_data was memset during allocation to all 0's so no need to
memset again.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://patch.msgid.link/20240807211809.1259563-3-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
