Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
bonding: fix ns targets not work on hardware NIC
The first patch fixed ns targets not work on hardware NIC when bonding
set arp_validate.
The second patch add a related selftest for bonding.
v4: Thanks Nikolay for the comments:
use bond_slave_ns_maddrs_{add/del} with clear name
fix comments typos
remove _slave_set_ns_maddrs underscore directly
update bond_option_arp_validate_set() change logic
v3: use ndisc_mc_map to convert the mcast mac address (Jay Vosburgh)
v2: only add/del mcast group on backup slaves when arp_validate is set (Jay Vosburgh)
arp_validate doesn't support 3ad, tlb, alb. So let's only do it on ab mode.
====================
Link: https://patch.msgid.link/20241111101650.27685-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 4598380f9c ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Fixes: 186734c158 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20241111095842.478833-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241108173334.2973603-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31 ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Fixes: fd1d62d80e ("net: stmmac: replace the use_phy_wol field with a flag")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20241109-mediatek-mac-wol-noninverted-v2-1-0e264e213878@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the
following code flow, the RCU read lock is not held, causing the
following error when `RCU_PROVE` is not held. The same problem might
show up in the IPv6 code path.
6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N
-----------------------------
net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!!
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by RetransmitAggre/3519:
#0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290
#1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90
stack backtrace:
lockdep_rcu_suspicious
mr_table_dump
ipmr_rtm_dumproute
rtnl_dump_all
rtnl_dumpit
netlink_dump
__netlink_dump_start
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
This is not a problem per see, since the RTNL lock is held here, so, it
is safe to iterate in the list without the RCU read lock, as suggested
by Eric.
To alleviate the concern, modify the code to use
list_for_each_entry_rcu() with the RTNL-held argument.
The annotation will raise an error only if RTNL or RCU read lock are
missing during iteration, signaling a legitimate problem, otherwise it
will avoid this false positive.
This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls
this function as well.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the pktgen_sample01_simple.sh script, the device variable is uppercase
'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot
enable UDP tx checksum.
Fixes: 460a9aa23d ("samples: pktgen: add UDP tx checksum support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241112030347.1849335-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.
Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.
This will ensure that we capture an EEE reconfiguration event.
Fixes: 3e43b903da ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-0-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594eda ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To generate hnode handles (in gen_new_htid()), u32 uses IDR and
encodes the returned small integer into a structured 32-bit
word. Unfortunately, at disposal time, the needed decoding
is not done. As a result, idr_remove() fails, and the IDR
fills up. Since its size is 2048, the following script ends up
with "Filter already exists":
tc filter add dev myve $FILTER1
tc filter add dev myve $FILTER2
for i in {1..2048}
do
echo $i
tc filter del dev myve $FILTER2
tc filter add dev myve $FILTER2
done
This patch adds the missing decoding logic for handles that
deserve it.
Fixes: e7614370d6 ("net_sched: use idr to allocate u32 filter handles")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241110172836.331319-1-alexandre.ferrieux@orange.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Removing full driver sections also removed mailing list entries, causing
submitters of future patches to forget CCing these mailing lists.
Hence re-add the sections for the Renesas Ethernet AVB, R-Car SATA, and
SuperH Ethernet drivers. Add people who volunteered to maintain these
drivers (thanks a lot!), and mark all of them as supported.
Fixes: 6e90b675cf ("MAINTAINERS: Remove some entries due to various compliance requirements.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Niklas Cassel <cassel@kernel.org>
Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Link: https://patch.msgid.link/4b2105332edca277f07ffa195796975e9ddce994.1731319098.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 338c4d3902.
Sebastian noticed the ISR indirectly acquires spin_locks, which are
sleeping locks under PREEMPT_RT, which leads to kernel splats.
Fixes: 338c4d3902 ("igb: Disable threaded IRQ for igb_msix_other")
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241106111427.7272-1-wander@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btintel: Direct exception event to bluetooth stack
- hci_core: Fix calling mgmt_device_connected
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmczlaIZHGx1aXoudm9u
LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKTBYD/9guawZa/20oiagUDOutuT/
i1KCPlVNrMpbeyDyK2sC2ConWOMHdpBToo0/vEwdKbAB/kCbWDh9DjWvaawSUngX
XPMTnk279WdWOLh6JUb87af1Q4wt8faro63g5gwTmXQrsIED5MlpMQJ2pZAkEmBe
pQU3QZJjz2BtnFHnVXHLXe53E3P0kWqlrqcAvdeJWRew+0rm++9f187pn9F/kUd0
F9f4YZgZAmlk56nT5kdv3NSi/cscm5xajlJSG9PlR40n7Un/T6RZXGzl0KeJ+hJw
DeyMOYBpBnGDOUe/7coqeZH6AulZWzHHIm5UXmqmVMM7KyT0mL/bxSDyXJnv2e6F
lXBEFNu6o/15N1S8uU6677+wcnbJ1BXwtDSk8iGOXECBN9hoB52NiIx1HPOI5mEX
dflH8FLe5hZx4b+yktTVBWWcBOd9cMonOxqOWPgfZ4ZbhnEe1SlVf4Qnh5Amq0yt
ZixbEP7G4k4uWhHvTdwVWIXPxGeBSmn8sQXG1ZSutwLaU9TQYL5W7m0DSnB4xdQB
h8J2/tdX63Fjm2tpkabb/oRvns9ekjq98QqNGlA2GP7jaqndJmg5ixg8Jhjn9uPF
OjG9z6OX4yrFFpJP4SXKAl7W3sg2g0yFGLDjoj2h9zVPuIcvbZG1NTzLgytNNXlG
JcFpsADEZAZcuUotyfFytg==
=7vO+
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel: Direct exception event to bluetooth stack
- hci_core: Fix calling mgmt_device_connected
* tag 'for-net-2024-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btintel: Direct exception event to bluetooth stack
Bluetooth: hci_core: Fix calling mgmt_device_connected
====================
Link: https://patch.msgid.link/20241112175326.930800-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Have exception event part of HCI traces which helps for debug.
snoop traces:
> HCI Event: Vendor (0xff) plen 79
Vendor Prefix (0x8780)
Intel Extended Telemetry (0x03)
Unknown extended telemetry event type (0xde)
01 01 de
Unknown extended subevent 0x07
01 01 de 07 01 de 06 1c ef be ad de ef be ad de
ef be ad de ef be ad de ef be ad de ef be ad de
ef be ad de 05 14 ef be ad de ef be ad de ef be
ad de ef be ad de ef be ad de 43 10 ef be ad de
ef be ad de ef be ad de ef be ad de
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Michal Luczaj says:
====================
virtio/vsock: Fix memory leaks
Short series fixing some memory leaks that I've stumbled upon while toying
with the selftests.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
====================
Link: https://patch.msgid.link/20241107-vsock-mem-leaks-v2-0-4e21bfcfc818@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As the final stages of socket destruction may be delayed, it is possible
that virtio_transport_recv_listen() will be called after the accept_queue
has been flushed, but before the SOCK_DONE flag has been set. As a result,
sockets enqueued after the flush would remain unremoved, leading to a
memory leak.
vsock_release
__vsock_release
lock
virtio_transport_release
virtio_transport_close
schedule_delayed_work(close_work)
sk_shutdown = SHUTDOWN_MASK
(!) flush accept_queue
release
virtio_transport_recv_pkt
vsock_find_bound_socket
lock
if flag(SOCK_DONE) return
virtio_transport_recv_listen
child = vsock_create_connected
(!) vsock_enqueue_accept(child)
release
close_work
lock
virtio_transport_do_close
set_flag(SOCK_DONE)
virtio_transport_remove_sock
vsock_remove_sock
vsock_remove_bound
release
Introduce a sk_shutdown check to disallow vsock_enqueue_accept() during
socket destruction.
unreferenced object 0xffff888109e3f800 (size 2040):
comm "kworker/5:2", pid 371, jiffies 4294940105
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
28 00 0b 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............
backtrace (crc 9e5f4e84):
[<ffffffff81418ff1>] kmem_cache_alloc_noprof+0x2c1/0x360
[<ffffffff81d27aa0>] sk_prot_alloc+0x30/0x120
[<ffffffff81d2b54c>] sk_alloc+0x2c/0x4b0
[<ffffffff81fe049a>] __vsock_create.constprop.0+0x2a/0x310
[<ffffffff81fe6d6c>] virtio_transport_recv_pkt+0x4dc/0x9a0
[<ffffffff81fe745d>] vsock_loopback_work+0xfd/0x140
[<ffffffff810fc6ac>] process_one_work+0x20c/0x570
[<ffffffff810fce3f>] worker_thread+0x1bf/0x3a0
[<ffffffff811070dd>] kthread+0xdd/0x110
[<ffffffff81044fdd>] ret_from_fork+0x2d/0x50
[<ffffffff8100785a>] ret_from_fork_asm+0x1a/0x30
Fixes: 3fe356d58e ("vsock/virtio: discard packets only when socket is really closed")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
mlx5 misc fixes 2024-11-07
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
====================
Link: https://patch.msgid.link/20241107183527.676877-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In Multi-PF (Socket Direct) configurations, when a loopback packet is
sent through one of the secondary devices, it will always be received
on the primary device. This causes the loopback layer to fail in
identifying the loopback packet as the devices are different.
To avoid false test failures, disable the loopback self-test in
Multi-PF configurations.
Fixes: ed29705e4e ("net/mlx5: Enable SD feature")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Non-uplink representor port does not support XDP. The patch clears
the xdp feature by checking the net_device_ops.ndo_bpf is set or not.
Verify using the netlink tool:
$ tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml --dump dev-get
Representor netdev before the patch:
{'ifindex': 8,
'xdp-features': {'basic',
'ndo-xmit',
'ndo-xmit-sg',
'redirect',
'rx-sg',
'xsk-zerocopy'},
'xdp-rx-metadata-features': set(),
'xdp-zc-max-segs': 1,
'xsk-features': set()},
With the patch:
{'ifindex': 8,
'xdp-features': set(),
'xdp-rx-metadata-features': set(),
'xsk-features': set()},
Fixes: 4d5ab0ad96 ("net/mlx5e: take into account device reconfiguration for xdp_features flag")
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served file was read from NFS on a kernel with NFS large folios support
(commit 49b29a573d ("nfs: add support for large folios")).
Fixes: 84d1bb2b13 ("net/mlx5e: kTLS, Limit DUMP wqe size")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of PCI vectors allocated by the platform (which may be fewer
than requested) is currently not honored when creating the SF pool;
only the PCI MSI-X capability is considered.
As a result, when a platform allocates fewer vectors
(in non-dynamic mode) than requested, the PF and SF pools end up
with an invalid vector range.
This causes incorrect SF vector accounting, which leads to the
following call trace when an invalid IRQ vector is allocated.
This issue is resolved by ensuring that the platform's vector
limit is respected for both the SF and PF pools.
Workqueue: mlx5_vhca_event0 mlx5_sf_dev_add_active_work [mlx5_core]
RIP: 0010:pci_irq_vector+0x23/0x80
RSP: 0018:ffffabd5cebd7248 EFLAGS: 00010246
RAX: ffff980880e7f308 RBX: ffff9808932fb880 RCX: 0000000000000001
RDX: 00000000000001ff RSI: 0000000000000200 RDI: ffff980880e7f308
RBP: 0000000000000200 R08: 0000000000000010 R09: ffff97a9116f0860
R10: 0000000000000002 R11: 0000000000000228 R12: ffff980897cd0160
R13: 0000000000000000 R14: ffff97a920fec0c0 R15: ffffabd5cebd72d0
FS: 0000000000000000(0000) GS:ffff97c7ff9c0000(0000) knlGS:0000000000000000
? rescuer_thread+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core.sf mlx5_core.sf.6: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0 enhanced)
mlx5_core.sf mlx5_core.sf.7: firmware version: 32.43.356
mlx5_core.sf mlx5_core.sf.6 enpa1s0f0s4: renamed from eth0
mlx5_core.sf mlx5_core.sf.7: Rate limit: 127 rates are supported, range: 0Mbps to 195312Mbps
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
mlx5_core 0000:a1:00.0: mlx5_irq_alloc:321:(pid 6781): Failed to request irq. err = -22
Fixes: 3354822cde ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IB representors depend on ETH representors, so the IB representors
should not exist without the ETH ones. When unloading the ETH
representors, the corresponding IB representors should be also
unloaded.
The commit 8d159eb211 ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
introduced the use of the ib_device_set_netdev API in IB
repsresentors. ib_device_set_netdev() increments the refcount of
the representor's netdev when loading an IB representor and
decrements it when unloading.
Without the unloading of the IB representor, the refcount of the
representor's netdev remains greater than 0, preventing it from
being unregistered.
The patch uncovered an underlying bug where the eth representor is
unloaded, without unloading the IB representor.
This issue happened when using multiport E-switch and rebooting,
causing the shutdown to hang when unloading the ETH representor
because the refcount of the representor's netdevice was greater than 0.
Call trace:
unregister_netdevice: waiting for eth3 to become free. Usage count = 2
ref_tracker: eth%d@00000000661d60f7 has 1/1 users at
ib_device_set_netdev+0x160/0x2d0 [ib_core]
mlx5_ib_vport_rep_load+0x104/0x3f0 [mlx5_ib]
mlx5_eswitch_reload_ib_reps+0xfc/0x110 [mlx5_core]
mlx5_mpesw_work+0x236/0x330 [mlx5_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
kthread+0xb8/0xe0
ret_from_fork+0x2d/0x50
ret_from_fork_asm+0x11/0x20
Fixes: 8d159eb211 ("RDMA/mlx5: Use IB set_netdev and get_netdev functions")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20241107183527.676877-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
====================
mptcp: fix a couple of races
The first patch addresses a division by zero issue reported by Eric,
the second one solves a similar issue found by code inspection while
investigating the former.
====================
Link: https://patch.msgid.link/cover.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Additional active subflows - i.e. created by the in kernel path
manager - are included into the subflow list before starting the
3whs.
A racing recvmsg() spooling data received on an already established
subflow would unconditionally call tcp_cleanup_rbuf() on all the
current subflows, potentially hitting a divide by zero error on
the newly created ones.
Explicitly check that the subflow is in a suitable state before
invoking tcp_cleanup_rbuf().
Fixes: c76c695656 ("mptcp: call tcp_cleanup_rbuf on subflows")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/02374660836e1b52afc91966b7535c8c5f7bafb0.1731060874.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Exit early if we're freeing more than 1024 frags, to prevent
looping too long.
Also minor code cleanups:
- Flip checks to reduce indentation.
- Use sizeof(*tokens) everywhere for consistentcy.
Cc: Yi Lai <yi1.lai@linux.intel.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107210331.3044434-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 55d42a0c3f ("selftests: net: add a test for closing
a netlink socket ith dump in progress") added a new test
but did not add it to gitignore.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tx_bytes should consider the actual size of the Ethernet frames
without the SPI encapsulation. But we still need to take care of
Ethernet padding.
Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20241108114343.6174-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Close a socket with dump in progress. We need a dump which generates
enough info not to fit into a single skb. Policy dump fits the bill.
Use the trick discovered by syzbot for keeping a ref on the socket
longer than just close, with mqueue.
TAP version 13
1..3
# Starting 3 tests from 1 test cases.
# RUN global.test_sanity ...
# OK global.test_sanity
ok 1 global.test_sanity
# RUN global.close_in_progress ...
# OK global.close_in_progress
ok 2 global.close_in_progress
# RUN global.close_with_ref ...
# OK global.close_with_ref
ok 3 global.close_with_ref
# PASSED: 3 / 3 tests passed.
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Note that this test is not expected to fail but rather crash
the kernel if we get the cleanup wrong.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can close the socket without getting to the end of the dump.
To make sure .start is always paired with .done we check if there
is an ongoing dump before freeing the socket, and if so call .done.
The complication is that sockets can get freed from BH and .done
is allowed to sleep. So we use a workqueue to defer the call, when
needed.
Unfortunately this does not work correctly. What we defer is not
the cleanup but rather releasing a reference on the socket.
We have no guarantee that we own the last reference, if someone
else holds the socket they may release it in BH and we're back
to square one.
The whole dance, however, appears to be unnecessary. Only the user
can interact with dumps, so we can clean up when socket is closed.
And close always happens in process context. Some async code may
still access the socket after close, queue notification skbs to it etc.
but no dumps can start, end or otherwise make progress.
Delete the workqueue and flush the dump state directly from the release
handler. Note that further cleanup is possible in -next, for instance
we now always call .done before releasing the main module reference,
so dump doesn't have to take a reference of its own.
Reported-by: syzkaller <syzkaller@googlegroups.com>
Fixes: ed5d7788a9 ("netlink: Do not schedule work from sk_destruct")
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241106015235.2458807-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Things are slowing down quite a bit, mostly driver fixes here.
No known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed
in a refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing configuration
when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=iWv1
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
The ionic_setup_one() creates a debugfs entry for ionic upon
successful execution. However, the ionic_probe() does not
release the dentry before returning, resulting in a memory
leak.
To fix this bug, we add the ionic_debugfs_del_dev() to release
the resources in a timely manner before returning.
Fixes: 0de38d9f1d ("ionic: extract common bits from ionic_probe")
Signed-off-by: Wentao Liang <Wentao_liang_g@163.com>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20241107021756.1677-1-liangwentao@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SMC-R variant of the SMC protocol used direct call to function
ib_device_ops.get_netdev() to lookup netdev. As we used mlx5 device
driver to run SMC-R, it failed to find a device, because in mlx5_ib the
internal net device management for retrieving net devices was replaced
by a common interface ib_device_get_netdev() in commit 8d159eb211
("RDMA/mlx5: Use IB set_netdev and get_netdev functions").
Since such direct accesses to the internal net device management is not
recommended at all, update the SMC-R code to use proper API
ib_device_get_netdev().
Fixes: 54903572c2 ("net/smc: allow pnetid-less configuration")
Reported-by: Aswin K <aswin@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://patch.msgid.link/20241106082612.57803-1-wenjia@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erik Schumacher found and fixed a problem in the calculation of the PWM
period setting yielding too long periods. Trevor Gamblin---who already
cared about mainlining the pwm-axi-pwmgen driver---stepped forward as an
additional reviewer.
Thanks to Erik and Trevor.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmcsghcACgkQj4D7WH0S
/k5+rwf9EQq0tGE7yoXdCz1s/YEwp3XadWW9jYAUiRip4bxxzSZeav435RdyVy6O
aSUifvm2MrlEjSMmRSGoOBnwSRHA6XwEeZKB4jh2CLaWklLwqOdCYA5Cyabup2Zn
Z0Kzs3jAaw/y4v6gB9sCO5bj47KY6px1XGn8dqMHrVDJvfTWz9PMUOPFyaCtR9Ov
Y9DVD2XTIZ2v6z0WHMLiMrYAqBgGxsqZTZTUs+cVBnGDDyKjD8SZNdk9vrxGoerw
yoQ8iljNLPPmz3iKELJh5IJhY5Nj5hVlzhFm7QSAlhIOFzxtCaDpwMyRUNEeYVjt
0+HumDC5X6MUBwgdFB55Ra3Nw+H3dg==
=QzWj
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix period setting in imx-tpm driver and a maintainer update
Erik Schumacher found and fixed a problem in the calculation of the
PWM period setting yielding too long periods. Trevor Gamblin - who
already cared about mainlining the pwm-axi-pwmgen driver - stepped
forward as an additional reviewer.
Thanks to Erik and Trevor"
* tag 'pwm/for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: add self as reviewer for AXI PWM GENERATOR
pwm: imx-tpm: Use correct MODULO value for EPWM mode
