As with other functions, batch the CPU data cache flushes and don't keep
recalculating PTE addresses.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The loop condition was wrong -- we should free a PMD only if its
_entire_ range is within the range we're intending to clear. The
early-termination condition was right, but not the loop.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Instead of calling domain_pfn_mapping() repeatedly with single or
small numbers of pages, just pass the sglist in. It can optimise the
number of cache flushes like domain_pfn_mapping() does, and gives a huge
speedup for large scatterlists.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
There's no need for the separate iommu_alloc_iova() function, and
certainly not for it to be global. Remove the underscores while we're at
it.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
As with dma_pte_clear_range(), don't keep flushing a single PTE at a
time. And also micro-optimise the setting of PTE values rather than
using the helper functions to do all the masking.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
It's a bit silly to repeatedly call domain_flush_cache() for each PTE
individually, as we clear it. Instead, batch them up and flush a whole
range at a time. We might as well refrain from recalculating the PTE
address from scratch each time round the loop too.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This is fairly broken anyway -- it doesn't take hotplug into account.
We should probably be checking page_is_ram() instead.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Most of its callers are having to shift for themselves anyway, so we might
as well do it in iommu_flush_iotlb_psi().
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
... and use it in the trivial cases; the other callers want individual
(and bisectable) attention, since I screwed them up the first time...
Make the BUG_ON() happen on too-large virtual address rather than
physical address, too. That's the one we care about.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Use unaligned address for domain->max_addr. That algorithm isn't ideal
anyway -- we should probably just look at the last iova in the tree.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
With some cleanup of intel_unmap_page(), intel_unmap_sg() and
vm_domain_exit() to no longer play with 64-bit addresses.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Add some helpers for converting between VT-d and normal system pfns,
since system pages can be larger than VT-d pages.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
There's no need for the GFX workaround now we have 'iommu=pt' for the
cases where people really care about performance. There's no need to
have a special case for just one type of device.
This also speeds up the iommu=pt path and reduces memory usage by
setting up the si_domain _once_ and then using it for all devices,
rather than giving each device its own private page tables.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
In caching mode, domain ID 0 is reserved for non-present to present
mapping flush. Device IOTLB doesn't need to be flushed in this case.
Previously we were avoiding the flush for domain zero, even if the IOMMU
wasn't in caching mode and domain zero wasn't special.
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, delay: tsc based udelay should have rdtsc_barrier
x86, setup: correct include file in <asm/boot.h>
x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h>
x86, mce: percpu mcheck_timer should be pinned
x86: Add sysctl to allow panic on IOCK NMI error
x86: Fix uv bau sending buffer initialization
x86, mce: Fix mce resume on 32bit
x86: Move init_gbpages() to setup_arch()
x86: ensure percpu lpage doesn't consume too much vmalloc space
x86: implement percpu_alloc kernel parameter
x86: fix pageattr handling for lpage percpu allocator and re-enable it
x86: reorganize cpa_process_alias()
x86: prepare setup_pcpu_lpage() for pageattr fix
x86: rename remap percpu first chunk allocator to lpage
x86: fix duplicate free in setup_pcpu_remap() failure path
percpu: fix too lazy vunmap cache flushing
x86: Set cpu_llc_id on AMD CPUs
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
timer stats: Optimize by adding quick check to avoid function calls
timers: Fix timer_migration interface which accepts any number as input
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
ftrace: Fix the output of profile
ring-buffer: Make it generally available
ftrace: Remove duplicate newline
tracing: Fix trace_buf_size boot option
ftrace: Fix t_hash_start()
ftrace: Don't manipulate @pos in t_start()
ftrace: Don't increment @pos in g_start()
tracing: Reset iterator in t_start()
trace_stat: Don't increment @pos in seq start()
tracing_bprintk: Don't increment @pos in t_start()
tracing/events: Don't increment @pos in s_start()
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
leds: Futher document blink_set
leds: Add options to have GPIO LEDs start on or keep their state
leds: LED driver for National Semiconductor LP3944 Funlight Chip
leds: pca9532 - Indent using tabs, not spaces.
leds: Remove an orphan Kconfig entry
leds: Further document parameters for blink_set()
leds: alix-leds2 fixed for Award BIOS
leds: leds-gpio - fix a section mismatch
leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current.
leds: change the license information
leds: fix led-bd2802 errors while resuming
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
amd64_edac: misc small cleanups
amd64_edac: fix ecc_enable_override handling
amd64_edac: check only ECC bit in amd64_determine_edac_cap
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits)
powerpc/rtas: Fix watchdog driver temperature read functionality
powerpc/mm: Fix potential access to freed pages when using hugetlbfs
powerpc/440: Fix warning early debug code
powerpc/of: Fix usage of dev_set_name() in of_device_alloc()
powerpc/pasemi: Use raw spinlock in SMP TB sync
powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock
powerpc/rtas: Turn rtas lock into a raw spinlock
powerpc: Add irqtrace support for 32-bit powerpc
powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel
powerpc/BSR: add 4096 byte BSR size
powerpc: Map more memory early on 601 processors
powerpc/pmac: Fix DMA ops for MacIO devices
powerpc/mm: Make k(un)map_atomic out of line
powerpc: Fix mpic alloc warning
powerpc: Fix output from show_regs
powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
powerpc/amigaone: Limit ISA I/O range to 4k in the device tree
powerpc/warp: Platform fix for i2c change
powerpc: Have git ignore generated files from dtc compile
powerpc/mpic: Fix mapping of "DCR" based MPIC variants
...
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI: video: prevent NULL deref in acpi_get_pci_dev()
eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go
eeepc-laptop: get the right value for CMSG
eeepc-laptop: makes get_acpi() returns -ENODEV
eeepc-laptop: right parent device
eeepc-laptop: rfkill refactoring
eeepc-laptop.c: use pr_fmt and pr_<level>
eeepc-laptop: Register as a pci-hotplug device
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] remove unknown mount option warning message
[CIFS] remove bkl usage from umount begin
cifs: Fix incorrect return code being printed in cFYI messages
[CIFS] cleanup asn handling for ntlmssp
[CIFS] Copy struct *after* setting the port, instead of before.
cifs: remove rw/ro options
cifs: fix problems with earlier patches
cifs: have cifs parse scope_id out of IPv6 addresses and use it
[CIFS] Do not send tree disconnect if session is already disconnected
[CIFS] Fix build break
cifs: display scopeid in /proc/mounts
cifs: add new routine for converting AF_INET and AF_INET6 addrs
cifs: have cifs_show_options show forceuid/forcegid options
cifs: remove unneeded NULL checks from cifs_show_options
amd64_check_ecc_enabled() returns non-zero status when ECC
checking/correcting is disabled and this fails further loading of the
driver even when 'ecc_enable_override' boot param is used.
Fix that by clearing return status in that case.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Checking whether the machine is using ECC enabled DRAM is done through
testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do
that instead of testing all bits from the DimmEccEn upwards.
Also, remove mci->edac_cap assignment and use value returned from
amd64_determine_edac_cap().
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Drop the e820 scanning and use existing function for finding valid
RAM regions to add to 1:1 mapping.
Signed-off-by: Chris Wright <chrisw@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The first entry of the ftrace profile was always skipped when
reading trace_stat/functionX.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4A443D59.4080307@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Using the RTAS watchdog driver to read out the temperature crashes
on a PXCAB:
Unable to handle kernel paging request for data at address 0xfe347b50
Faulting instruction address: 0xc00000000001af64
Oops: Kernel access of bad area, sig: 11 [#1]
The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is
removed by using the function rtas_get_sensor() which does the
right thing.
Signed-off-by: Adrian Reber <adrian@lisas.de>
Acked-by: Utz Bacher <utz.bacher@de.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
