mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 07:01:32 +00:00
c147f663b6
708 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
12cc3d5389 |
sound updates for 6.11-rc1
Lots of changes in this cycle, but mostly for cleanups and refactoring. Significant amount of changes are about DT schema conversions for ASoC at this time while we see other usual suspects, too. Some highlights below: Core: - Re-introduction of PCM sync ID support API - MIDI2 time-base extension in ALSA sequencer API ASoC: - Syncing of features between simple-audio-card and the two audio-graph cards - Support for specifying the order of operations for components within cards to allow quirking for unusual systems - Lots of DT schema conversions - Continued SOF/Intel updates for topology, SoundWire, IPC3/4 - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242 HD-audio: - More quirks, Intel PantherLake support, senarytech codec support - Refactoring of Cirrus codec component-binding Others: - ALSA control kselftest improvements, and fixes for input value checks in various drivers -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmaZNdoOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/PWw//XYFQ2v+bc0x62LI1rIEt1/mSz6R1moHf85fK CjDOvHoGlZEkXuTmycK8b522/9tslHyE+8P97TZAy/6ph/yT44JgwQaadAvTZdWK eKrchogf+v6DaQar8+nmXp8409HBcfJdrSJth2xR5OhY741/kGBF1/YCBHZaIQan T87ag0tu1PVWQuLhdRlghkNYds+oaSX6wMaLRzVYI2TFYfHZOWYfVYd/NACb8KtO z66TqybOxOpq4xCi+umNaGn2TxdDvo427JgioAKzcGLodowRKmqNV+mXddfrhBEE Fwq4o8YGxgX+oaNn4aLQdrrREc1tuwQj0Kwpt/rkh4ESTgugcElq5hJCgPY8U3Ej 5+ih7ZeIojKnfjNivHuath7tXe1inqPEK3RBt3qMoUldIxNhJ8WfIF0RNzW/QRY2 g4JAI/4lswqPz6vYKULatDk+ZEW6PiV72kwW+4Vt7NxZnn9VFzP27qHuwkUHP5HM 0q4/NKrv+MFPedOLEeEm/1dmE7NRT4tRJuIV+RwMJ0cyP4l2jSCwyDpxfkFqGitc wB0AXK3YLwISlKjziCox1cAex8F2XhjCdpOyOV6hTc3Dv/DySMHysv+4Uf4/kvst 3GrqdkMHy4cEUYj/Sj+VunfColsX2KnQAN+e4Sonn+5nPsw7ypGkpM1Kf+wTQuNK EoxpzGo= =hn0h -----END PGP SIGNATURE----- Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "Lots of changes in this cycle, but mostly for cleanups and refactoring. Significant amount of changes are about DT schema conversions for ASoC at this time while we see other usual suspects, too. Some highlights below: Core: - Re-introduction of PCM sync ID support API - MIDI2 time-base extension in ALSA sequencer API ASoC: - Syncing of features between simple-audio-card and the two audio-graph cards - Support for specifying the order of operations for components within cards to allow quirking for unusual systems - Lots of DT schema conversions - Continued SOF/Intel updates for topology, SoundWire, IPC3/4 - New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5 and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments PCM5242 HD-audio: - More quirks, Intel PantherLake support, senarytech codec support - Refactoring of Cirrus codec component-binding Others: - ALSA control kselftest improvements, and fixes for input value checks in various drivers" * tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits) kselftest/alsa: Log the PCM ID in pcm-test kselftest/alsa: Use card name rather than number in test names ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360 ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop ALSA: seq: ump: Skip useless ports for static blocks ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused ALSA: usb: Use BIT() for bit values ALSA: usb: Fix UBSAN warning in parse_audio_unit() ALSA: hda/realtek: Enable headset mic on Positivo SU C1400 ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema ASoC: cs530x: Remove bclk from private structure ASoC: cs530x: Calculate proper bclk rate using TDM ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema firmware: cs_dsp: Rename fw_ver to wmfw_ver firmware: cs_dsp: Clarify wmfw format version log message firmware: cs_dsp: Make wmfw and bin filename arguments const char * ... |
||
Kory Maincent
|
2111375b85 |
net: Add struct kernel_ethtool_ts_info
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Herve Codina
|
af8432b2e4
|
soc: fsl: cpm1: qmc: Introduce qmc_chan_count_phandles()
No function in the QMC API is available to get the number of phandles present in a phandle list. Fill this lack introducing qmc_chan_count_phandles(). Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Herve Codina
|
37797c605d
|
soc: fsl: cpm1: qmc: Introduce functions to get a channel from a phandle list
qmc_chan_get_byphandle() and the resource managed version retrieve a channel from a simple phandle. Extend the API and introduce qmc_chan_get_byphandles_index() and the resource managed version in order to retrieve a channel from a phandle list using the provided index to identify the phandle in the list. Also update qmc_chan_get_byphandle() and the resource managed version to use qmc_chan_get_byphandles_index() and so avoid code duplication. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
Linus Torvalds
|
619b92b9c8 |
I'm actually surprised this time. There aren't any new Qualcomm SoC clk
drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmZGs1MRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW2Pw/+OciG7jQzlWQD09M9qTSzygVu/0+NF8ez ecvLnWzz3b05GSWqfeG3mm09RmaTtggwPcWx4ad5NBDxGfhn+rT72WWJt6EjA1ln i/eNUQIlFZmiDM7Xwx6S841hcRbPz9/RRIeXtmiDkMWjsysr6MHlTkWWVMNfGkiE 9jxM5BH6N04A4664k3a4qlcZkj2KNkOLeCyzMLtm5aIwBoL3fZ+Q3sqVTgp5imt1 rzJgpGfN1QhAnd8kV2oIPtJEs9woZtRjCtTtLrTnoGf518uq25ZJx7Mz3Dx+ubUv dtOLjjXdM+Q/ou7DM3h7HRjiZC8Mp8CprwwoxEbckBL4gBWYPyu8e6eZNBsF+3Ol 7WP3TZknDrWsUDxAcX37Euidd+hc8xtbXCQwm+QcugEee7ZXK4ElTgXwyH3FUqn2 GBI5D0+/3WyoBLqVQ7nTkMV0ps5dHrpBj6J1u/7ZfvC23/E7/5CzIxULXt1hTOcI F1cqS78HLAc8BK3gw/63e5TtTMA4cItJD7InBB0jemfeoy03nuWzFbRUqtAStkHd BKxmGSV3XXMdGtiN5SFy3tk7NlKeFMiVBiTzD++Vx9IL3mCdArtULu93OfUIOzXW B/ekJKi9OHkJx3mBrbio6k4rugQDZovzWN9U2pDJtGCIaAXgYgwKuP8S9UwKLIcx R6QarNE5Rsc= =YoVJ -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "I'm actually surprised this time. There aren't any new Qualcomm SoC clk drivers. And there's zero diff in the core clk framework. Instead we have new clk drivers for STM and Sophgo, with Samsung^WGoogle in third for the diffstat because they introduced HSI0 and HSI2 clk drivers for Google's GS101 SoC (high speed interface things like PCIe, UFS, and MMC). Beyond those big diffs there's the usual updates to various clk drivers for incorrect parent descriptions or mising MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super interesting here. New Drivers: - STM32MP257 SoC clk driver - Airoha EN7581 SoC clk driver - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver - Loongson-2k0500 and Loongson-2k2000 SoC clk driver - Add HSI0 and HSI2 clock controllers for Google GS101 - Add i.MX95 BLK CTL clock driver Updates: - Allocate clk_ops dynamically for SCMI clk driver - Add support in qcom RCG and RCG2 for multiple configurations for the same frequency - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve issues - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some boards - Cleanups and fixes for Qualcomm Stromer PLLs - Reduce max CPU frequency on Qualcomm APSS IPQ5018 - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera clk drivers - Make Qualcomm MSM8998 Venus clocks functional - Cleanup downstream remnants related to DisplayPort across Qualcomm SM8450, SM6350, SM8550, and SM8650 - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL - Use a specific Qualcomm QCS404 compatible for the otherwise generic HFPLL - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused - Remove an unused field in the Qualcomm RPM clk driver - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953 global clock controller drivers - Allow choice of manual or firmware-driven control over PLLs, needed to fully implement CPU clock controllers on Exynos850 - Correct PLL clock IDs on ExynosAutov9 - Propagate certain clock rates to allow setting proper SPI clock rates on Google GS101 - Mark certain Google GS101 clocks critical - Convert old S3C64xx clock controller bindings to DT schema - Add new PLL rate and missing mux on Rockchip rk3568 - Add missing reset line on Rockchip rk3588 - Removal of an unused field in struct rockchip_mmc_clock - Amlogic s4/a1: add regmap maximum register for proper debugfs dump - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers - Amlogic pll driver: print clock name on lock error to help debug - Amlogic vclk: finish dsi clock path support - Amlogic license: fix occurence "GPL v2" as reported by checkpatch - Add PM runtime support to i.MX8MP Audiomix - Add DT schema for i.MX95 Display Master Block Control - Convert to platform remove callback returning void for i.MX8MP Audiomix - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas R-Car V4M - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five - Prepare power domain support for Renesas RZ/G2L family members, and add actual support on Renesas RZ/G3S SoC - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas R-Car V4M - Add additional constraints to Allwinner A64 PLL MIPI clock - Fix autoloading sunxi-ng clocks when build as a module" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits) clk: samsung: Don't register clkdev lookup for the fixed rate clocks clk, reset: microchip: mpfs: fix incorrect preprocessor conditions clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018 clk: qcom: Fix SM_GPUCC_8650 dependencies clk: qcom: Fix SC_CAMCC_8280XP dependencies dt-bindings: clocks: stm32mp25: add access-controllers description clock, reset: microchip: move all mpfs reset code to the reset subsystem clk: samsung: gs101: drop unused HSI2 clock parent data clk: rockchip: rk3568: Add PLL rate for 724 MHz clk: rockchip: Remove an unused field in struct rockchip_mmc_clock dt-bindings: clock: fixed: Define a preferred node name clk: meson: s4: fix module autoloading clk: samsung: gs101: mark some apm UASC and XIU clocks critical clk: imx: imx8mp: Convert to platform remove callback returning void clk: imx: imx8mp: Switch to RUNTIME_PM_OPS() clk: bcm: rpi: Assign ->num before accessing ->hws clk: bcm: dvp: Assign ->num before accessing ->hws clk: samsung: gs101: add support for cmu_hsi2 clk: samsung: gs101: add support for cmu_hsi0 ... |
||
Linus Torvalds
|
c024814828 |
Hi,
This is pull request for trusted keys subsystem containing a new key type for the Data Co-Processor (DCP), which is an IP core built into many NXP SoCs such as i.mx6ull. BR, Jarkko -----BEGIN PGP SIGNATURE----- iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZjzswCAcamFya2tvLnNh a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0iVQAP9lxVjTKjMHQB01 KFAXUogNU42JuJjzEiC5TaDxFPNHlAEAqVBYnPIZdP4VMF3UalVgIu/eRfvxTW/t klC+q7WiEwg= =+33z -----END PGP SIGNATURE----- Merge tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull trusted keys updates from Jarkko Sakkinen: "This contains a new key type for the Data Co-Processor (DCP), which is an IP core built into many NXP SoCs such as i.mx6ull" * tag 'keys-trusted-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: docs: trusted-encrypted: add DCP as new trust source docs: document DCP-backed trusted keys kernel params MAINTAINERS: add entry for DCP-based trusted keys KEYS: trusted: Introduce NXP DCP-backed trusted keys KEYS: trusted: improve scalability of trust source config crypto: mxs-dcp: Add support for hardware-bound keys |
||
David Gstir
|
3d16af0b4c |
crypto: mxs-dcp: Add support for hardware-bound keys
DCP (Data Co-Processor) is able to derive private keys for a fused random seed, which can be referenced by handle but not accessed by the CPU. Similarly, DCP is able to store arbitrary keys in four dedicated key slots located in its secure memory area (internal SRAM). These keys can be used to perform AES encryption. Expose these derived keys and key slots through the crypto API via their handle. The main purpose is to add DCP-backed trusted keys. Other use cases are possible too (see similar existing paes implementations), but these should carefully be evaluated as e.g. enabling AF_ALG will give userspace full access to use keys. In scenarios with untrustworthy userspace, this will enable en-/decryption oracles. Co-developed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at> Co-developed-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: David Gstir <david@sigma-star.at> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Conor Dooley
|
bc2da26599 |
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
While moving all the reset code in the PolarFire SoC clock driver to the
reset subsystem, I removed an `#if IS_ENABLED(RESET_CONTROLLER)` from
the driver and moved it to the header, however this was not the correct
thing to do. In the driver such a condition over-eagerly provided a
complete implementation for mpfs_reset_{read,write}() when the reset
subsystem was enabled without the PolarFire SoC reset driver, but in the
header it meant that when the subsystem was enabled and the driver was
not, no implementation for mpfs_reset_controller_register() was
provided. Fix the condition so that the stub implementation of
mpfs_reset_controller_register() is used when the reset driver is
disabled.
Fixes:
|
||
Conor Dooley
|
098c290a49 |
clock, reset: microchip: move all mpfs reset code to the reset subsystem
Stephen and Philipp, while reviewing patches, said that all of the aux device creation and the register read/write code could be moved to the reset subsystem, leaving the clock driver with no implementations of reset_* functions at all. Move them. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240424-strangle-sharpener-34755c5e6e3e@spud Signed-off-by: Stephen Boyd <sboyd@kernel.org> |
||
Maulik Shah
|
f592cc5794 |
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.
Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.
This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.
Fixes:
|
||
Linus Torvalds
|
bb41fe35dc |
Char/Misc and other driver subsystem updates for 6.9-rc1
Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning with some older versions of gcc for a speakup driver, fix for that will come in a few days when I catch up with my pending patch queues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZfwuLg8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynKVACgjvR1cD8NYk9PcGWc9ZaXAZ6zSnwAn260kMoe lLFtwszo7m0N6ZULBWBd =y3yz -----END PGP SIGNATURE----- Merge tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the big set of char/misc and a number of other driver subsystem updates for 6.9-rc1. Included in here are: - IIO driver updates, loads of new ones and evolution of existing ones - coresight driver updates - const cleanups for many driver subsystems - speakup driver additions - platform remove callback void cleanups - mei driver updates - mhi driver updates - cdx driver updates for MSI interrupt handling - nvmem driver updates - other smaller driver updates and cleanups, full details in the shortlog All of these have been in linux-next for a long time with no reported issue, other than a build warning for the speakup driver" The build warning hits clang and is a gcc (and C23) extension, and is fixed up in the merge. Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/ * tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits) binder: remove redundant variable page_addr uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion uio_pruss: UIO_MEM_DMA_COHERENT conversion cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT uio: introduce UIO_MEM_DMA_COHERENT type cdx: add MSI support for CDX bus pps: use cflags-y instead of EXTRA_CFLAGS speakup: Add /dev/synthu device speakup: Fix 8bit characters from direct synth parport: sunbpp: Convert to platform remove callback returning void parport: amiga: Convert to platform remove callback returning void char: xillybus: Convert to platform remove callback returning void vmw_balloon: change maintainership MAINTAINERS: change the maintainer for hpilo driver char: xilinx_hwicap: Fix NULL vs IS_ERR() bug hpet: remove hpets::hp_clocksource platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH char: xilinx_hwicap: drop casting to void in dev_set_drvdata greybus: move is_gb_* functions out of greybus.h greybus: Remove usage of the deprecated ida_simple_xx() API ... |
||
Arnd Bergmann
|
daa0987e1f |
Qualcomm driver updates for v6.9
This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver. The Qualcomm SMEM no longer acquires the hwspinlock during the "get" operation, to improve the system behavior during the recovery of a remoteproc that crashed with the hwspinlock held. The Qualcomm Always On Subsystem (AOSS) message protocol driver gains tracepoints, printf annotation, and a debugfs interface is introduced for tweaking system properties during development and debugging. The Qualcomm socinfo driver gains data for SM8475, QCM8550 and QCS8550 platforms, and the PM2250 is renamed to PM4125. Support for controlling the voltage regulator in SPM/SAW2 is introduced. The gfx.lvl power-domain is dropped for SA8540P, as this resource was incorrectly inherited from SC8280XP. Additionally some code cleanup improvements is introduced across APR, LLCC, SMP2P and SPM. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmXarn0VHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FzZoP/2hYUMS+sR2kD7gZDGi8oV71C+dQ Vmo1MQIhGjYEb6HSHdrxp/11GPlLVU45xuk9/FFVqAPrxNQm2y9NC60Ye1TQNWZR XS+w5+YkIFdfZIbZ8GGmlPspeXDSnq2DGWQjht+cBNyASzhjO5ICP79WQ0jfHgjH l5pNw3YMamc7pwdX2oslxXV8HzDr4JxzpveV0+QbsVDU4J04mrxoBRmv2cdqv2Eb 5jNR4HjmCQkdI/bp/2frCmWmGP9bqP24C6XWCe4lXuCAsmNKAeEeuyABnsPNRYrO 5ELd2sPpXBLBUhR9w/0rY9ouIsJ500BD7U1yLrHocwGICL1Ro7dGjnyp6j/7Tm9X 1nx2mHK7ywH7E6BxVTcmDS3CtymcMknpUfUjANJ/yQrAmcqvKRA3F0ELiXywrndQ 0R97qjc9ixVaM5LU4kMgQG50NZCmsNPJ7a3smOihpmfJK+6Mmkc5XxFRYuJgL9Ag b1PwnVgzeBPQAs+Tx7i5bBfFOa49zVxHYIFfu+XY50DL80viiKCRAeXQNyWmJ0qM 3tKgMeIY2nXZJ0DvySFfro51AnZcXEMa3Bc5qNZlM4jaqXGPkDocAV9CYKntlXFU POnOnGo4liZalWqel3tTuDoBu3nVAq0q4+ooWl755TRGBtIvW1tWAOgldjg6v3Ef 6BgAWh8GrEHM0etB =T09a -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXl7kUACgkQYKtH/8kJ UidEfQ//eugpCwNrv6q1TdlSBJkwlVV/3VJLewh4SCdpckQNJ9ysxDt0hnbTVVz8 ykR0ilYLrpuinbWSaBIZp4oxypIHOEhXzQf1diyrAjM9T5mVnv+Ytdy3qDrQ1SOM yg8n64aaBCrJiCJk3vHitS2DxStbmikX8i0dzQNeG7YskplrkbKXqtXjQ8zmanAc 2Y4Ot1DMoTKjp4t6mC7yF5YXTEfCkg0eHaIdzMREarWRUU+g0qqR43T416AhayM5 4mNH42/0rxJtvN3+EeQkVBXMWu2hmHt9esdR216GZ22fS+J9HAVOGPM+oga1Td7c 947T2BB55AalfjiNxWbfabxNmHyEuVyYWaDAJO/qU0ZIE+539QAVaW9xrTxYeOFp PbctLehm3DUPmR453R4oUTGC6UD+OnZOj+ppy/vB08UbdF5bV0KRT/hviOR+bb6U VCYRbDIsfzY1fFFLJShZONogZADtciDjel7WATwhttw503NLH5DaebD+OjPbHVgq U4y7maUGPkbAPJT4YbYOcetqVOnYiFp8OG3J/JDTOr3+3RNtInPYao5TSb1QNjGh A7+4jKf0X8err26xpmGXfa2nG8hUNOPn/PYVNwxgWmq0P74KR2GwenB4ze+SME2J sc6ZQy4LAnU8KSAZpLVPrv78R9cbyCvCtWbQpKzY8l8PfzhaK24= =bPSM -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.9 This introduces the Qualcomm Programmable Boot Sequencer (PBS) driver. The Qualcomm SMEM no longer acquires the hwspinlock during the "get" operation, to improve the system behavior during the recovery of a remoteproc that crashed with the hwspinlock held. The Qualcomm Always On Subsystem (AOSS) message protocol driver gains tracepoints, printf annotation, and a debugfs interface is introduced for tweaking system properties during development and debugging. The Qualcomm socinfo driver gains data for SM8475, QCM8550 and QCS8550 platforms, and the PM2250 is renamed to PM4125. Support for controlling the voltage regulator in SPM/SAW2 is introduced. The gfx.lvl power-domain is dropped for SA8540P, as this resource was incorrectly inherited from SC8280XP. Additionally some code cleanup improvements is introduced across APR, LLCC, SMP2P and SPM. * tag 'qcom-drivers-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (23 commits) dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible soc: qcom: spm: add support for voltage regulator soc: qcom: spm: remove driver-internal structures from the driver API dt-bindings: soc: qcom: qcom,saw2: define optional regulator node dt-bindings: soc: qcom: qcom,saw2: add missing compatible strings dt-bindings: soc: qcom: merge qcom,saw2.txt into qcom,spm.yaml soc: qcom: llcc: Check return value on Broadcast_OR reg read soc: qcom: socinfo: Add Soc IDs for SM8475 family dt-bindings: arm: qcom,ids: Add IDs for SM8475 family soc: qcom: apr: make aprbus const dt-bindings: soc: qcom: qcom,pmic-glink: document X1E80100 compatible soc: qcom: add QCOM PBS driver dt-bindings: soc: qcom: Add qcom,pbs bindings pmdomain: qcom: rpmhpd: Drop SA8540P gfx.lvl soc: qcom: socinfo: rename PM2250 to PM4125 soc: qcom: aoss: Add tracepoints in qmp_send() soc: qcom: socinfo: add SoC Info support for QCM8550 and QCS8550 platform dt-bindings: arm: qcom,ids: add SoC ID for QCM8550 and QCS8550 soc: qcom: aoss: Add debugfs interface for sending messages soc: qcom: smem: remove hwspinlock from item get routine ... Link: https://lore.kernel.org/r/20240225030612.480241-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Krzysztof Kozlowski
|
0dc5b8abfa |
interconnect: constify of_phandle_args in xlate
The xlate callbacks are supposed to translate of_phandle_args to proper provider without modifying the of_phandle_args. Make the argument pointer to const for code safety and readability. Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Thierry Reding <treding@nvidia.com> # Tegra Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alim Akhtar <alim.akhtar@samsung.com> # Samsung Link: https://lore.kernel.org/r/20240220072213.35779-1-krzysztof.kozlowski@linaro.org Signed-off-by: Georgi Djakov <djakov@kernel.org> |
||
Dmitry Baryshkov
|
57e2b067f1 |
soc: qcom: spm: remove driver-internal structures from the driver API
Move internal SPM driver structures to the driver itself, removing them from the public API. The CPUidle driver doesn't use them at all. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240102-saw2-spm-regulator-v7-4-0472ec237f49@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> |
||
Kartik
|
8402074f30 |
soc/tegra: fuse: Add support for Tegra241
Add support for Tegra241 which use ACPI boot. Signed-off-by: Kartik <kkartik@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Christophe JAILLET
|
9863084dd9 |
soc/tegra: pmc: Remove some old and deprecated functions and constants
These TEGRA_IO_RAIL_... functions and constants have been deprecated in
commit
|
||
Dmitry Baryshkov
|
5155e48128 |
soc: qcom: socinfo: rename PM2250 to PM4125
It seems, the only actual mentions of PM2250 can be found are related to the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a PMIC name. Rename PM2250 to PM4125 to follow the documentation. Fixes: |
||
Linus Torvalds
|
2385018a4e |
- New Device Support
- Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC - Fix-ups - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Continue work to remove superfluous platform .remove() call-backs - Move some exported symbols into private namespaces - Clean-up and staticify PM related operations - Trivial; spelling, whitespace, clean-ups, etc - Fix include lists; alphabetise, remove unused, explicitly add used - Bug Fixes - Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can co-exist - Ensure debugfs register view is correctly presented - Fix ordering and value issues in current use of clk_register_fractional_divider() - Repair Kconfig based dependency lists -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmWmsH0ACgkQUa+KL4f8 d2HIpQ//TWvqbUtHFxK89b/g4soIo2LS8Odz6CnbMlAwlNnhjgrqqFXnPxifN+TP L6aZX9buij7kH6iPfIi/hFDKVMwxgLUax0rTHNIvzOgg++jw3UoR/x4CvLITJ8Yb FUVMGLF1lPbXrURS7G23LnZpM0WTWEgJvb+zOLVsL3J6HihGi9JO2EoNHwM/GwSl eTtZydwdRo0u7m+z+EjaZnoSamBF+5i8ZJUAg8eF9LZtCB0AXe/zMWjgtZNz1Pqn dAd7CbOdJQjaxYtBlRRpgdIuI6d29yotY91pGu5OEhmXPMZuZRUjtz0HnNDNcPvU +Mnz3L8tcci8ZUmQ0Zr8OBrYtw623074+h/TSeUj88Ce4LAzYkvIfprw21qxl9Wx h1VxHf0GsJRswi6lgOA4JItZEARhU37ePMPZ2zyT7e8IWh35KGbdYubUstLFittP zzwiPO0haGeprvSgX+pn2rxJofaFtSIpqiMB7LtSKqmiEl1DgdC06+wikLe8l9+y LnvyzQOECh1ANMHdvoQO2mqa97WxlzTBe9zg5mQQrOnyUJgYb0D5dDA8l/xvobUz XlMIsJ8ZCulwVkQWdXIHZFtfaoKs3jM4G3vJIy+vkQSf+U3y4pGhNhMJ67Cz33Ge W2riI+Vq/mmLMUDayCZENxTJ3WNUO6rqymvbtCPEuiHRSFnjBYU= =R7SR -----END PGP SIGNATURE----- Merge tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd updates from Lee Jones: "New Device Support: - Add support for Qualcomm PM8937 PMIC to QCOM SPMI PMIC Fix-ups: - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations - Device Tree binding adaptions/conversions/creation - Improve error handling; return proper error values, simplify, avoid duplicates, etc - Continue work to remove superfluous platform .remove() call-backs - Move some exported symbols into private namespaces - Clean-up and staticify PM related operations - Trivial; spelling, whitespace, clean-ups, etc - Fix include lists; alphabetise, remove unused, explicitly add used Bug Fixes: - Use PLATFORM_DEVID_AUTO to ensure multiple duplicate devices can co-exist - Ensure debugfs register view is correctly presented - Fix ordering and value issues in current use of clk_register_fractional_divider() - Repair Kconfig based dependency lists" * tag 'mfd-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (50 commits) mfd: ti_am335x_tscadc: Fix TI SoC dependencies dt-bindings: mfd: sprd: Add support for UMS9620 mfd: ab8500-sysctrl: Drop ancient charger mfd: intel-lpss: Fix the fractional clock divider flags mfd: tps6594: Add null pointer check to tps6594_device_init() dt-bindings: mfd: pm8008: Clean up example node names dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Clean up example dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix regulator binding dt-bindings: mfd: hisilicon,hi6421-spmi-pmic: Fix up binding reference mfd: da9062: Simplify obtaining I2C match data mfd: syscon: Fix null pointer dereference in of_syscon_register() mfd: intel-lpss: Don't fail probe on success of pci_alloc_irq_vectors() mfd: twl6030-irq: Revert to use of_match_device() mfd: cs42l43: Correct order of include files to be alphabetical mfd: cs42l43: Correct SoundWire port list mfd: Fix a few spelling mistakes in PMIC header file comments mfd: intel-lpss: Provide Intel LPSS PM ops structure mfd: intel-lpss: Move exported symbols to INTEL_LPSS namespace mfd: intel-lpss: Adjust header inclusions mfd: intel-lpss: Use device_get_match_data() ... |
||
Arnd Bergmann
|
8d446ff13a |
Memory controller drivers for v6.8
Few improvements for Tegra Memory Controller: Override the SID programming in the device, if firmware or bootloader left it in bypass mode, e.g. after resuming from suspend. Skip prorgamming the SID, if given Memory Controller client does not support it. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmV5S74QHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD12mVD/4tj4NUiVuytvYTI5J9+z+u+69/Nbkr9xz8 C6APNPovUHFJTvy76J1sRzzJNL/MFSLMC271hcSEvpfQAkBNvdW4drq8seDsRJcx 5CbJPX0U+fxgSTubOJq1Q/vDe+29v6xhpt/LEauB3KvxJl3uJdVkPFnURzREvFHL +eEdQSq60td6I65me///D5QNBYr03Qjyfag7GTf05fbnfcc9zkXVV1rIEl/KlBpy 1cw5/8mxvRS0JUKLJxQ/2VHJDkadcGiFbS1DwtSY5ouXqiWDgNaXk7pvMKU8UBAQ 6kgKjNfnr+BkI1nbqGlB0bHIgoSeEGDeYMXsgETsliuOUKw8Hg5bFhy137e0gLOg A0/o3fDQUbsYAjp3NuN1habt5IqIdvm2a66gAOnYxgZHRuy4HZeUrxjPqFU70TRA uPTjms3SUmzb7IfV1i5nA9FFxH3vRk+NmjxCP9bDmsAMvSRZADORDKWFnWhWP4h3 +UB2pFAZVcM2x2qBPZUP5zB8BVhyRc4qMDT/Lnj+1/zBTdDEIkxXhLAqADU9EkZB 59JSp6n967MpWhYNUmjTYdnQ9ZLVEWjA/ZHJMgEfFtU0ackRct4sySiR7+oOyiJS bgynakMgK894k2TSAKWCStXwi8lfeKkgPb3oNqmE4WE8SgNGjIoCean8fNLOCc1f 28xZ1BHCKQ== =rulX -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWFcoYACgkQYKtH/8kJ Uiff9hAAgPBABQIC9MfH3+H8dsyZ2Z+ylHmkWlkyjyFQYZz6RbNgwD4p1jCxXVJY EX3yT2KAJGaa0tHy2zo3vsFrD/jFlHYuqwJE9TTHvyl+bjJhi9iZWhIe+AmN+dk4 CFIK8CPzgKS/Dd2/4NpwE09RZz5qw2W+SppcdV6kgte7kmCcc4Cj9GWLZMAq5Me5 iIdwTIzUaWcmKP153p17/X3UKR8RcTIvKl8Ebf4NoD05wI7f7z60PNDjfiALSV5j yRwKKsgBTowmOrBb5G5LKT4qDynkRpPJAN+P8kmRXjnZFRrnT7eUfjm6zYKBsClb XpR3X6sId+OH7iXpww7IX/r1Htgksfa/Tsyoh5L0d8RiSSEC0E+ZoZfdn8c+TjPR ZxgfrdmOE1Qs6TufIb8FXzrJ22RAY8/2HfmI0aFeMX5HDWjSd8EmuFfINqADLTm8 v3wGZYUPH3PMcLvcPMtjBk2pQhWIGePY6bMH8oi9625fZxa4vmILxCF5VzIt0Xol wkqXQizhCSIIU90MzSilq0TIjK81pE1Lbq97KRqpAWl/+lAITNI2jEF70yjPxcn9 TPsJNMmbORli9lc2/Tmp43NJcMyor5ss63Yu+hJaz87I/Jx/mC4zR024sW2a/5+e Mi+k0ny5MpZRUCscr4NskzSKMAL4Z4uUoBbFqoEwhA7pIKo3VTE= =QWhm -----END PGP SIGNATURE----- Merge tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.8 Few improvements for Tegra Memory Controller: Override the SID programming in the device, if firmware or bootloader left it in bypass mode, e.g. after resuming from suspend. Skip prorgamming the SID, if given Memory Controller client does not support it. * tag 'memory-controller-drv-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: Protect SID override call under CONFIG_IOMMU_API memory: tegra: Skip SID programming if SID registers aren't set memory: tegra: Add SID override programming for MC clients Link: https://lore.kernel.org/r/20231213061523.4803-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Arnd Bergmann
|
cd845dfd46 |
RISC-V SoC drivers for v6.8
There's only one set of changes here, the addition of "Auto Update" support for PolarFire SoC. Auto Update is one of the ways that the FPGA bitstream can be updated, and the only one suitable for use from Linux as it does not immediately initiate a reboot when started. The driver was not accepted in the FPGA manager subsystem as the update only occurs after a reboot and makes no use of the FPGA manager framework. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZYQwXQAKCRB4tDGHoIJi 0lieAQC6en0Y0TRDRF18NX0SqnmrxMaiwJxV0tGp+WGgykpmEwEA9vZliqRRG+zJ ZTMkk+zHVTtYgIXt2WFelDLKj5abHAE= =4VMq -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmWFcWgACgkQYKtH/8kJ UifdChAAjnUWNXC7jCfVqj5ALE/dGz8vPpXnY8FpNr90hZpbgAldMOvIkIGD1MlC eAglMXDDYnvuM5WUa6Pui/EHSSTbG4J8R6w36EUmG9mjzyCSsZ8fx4/hss6UI/hB pAHhpR3Er9v8eIg2Td0LE/hN+vVwJJiOgGkQgEYcr9ipmGDv+tXjUqDbtA7z933S lQO2zYZKcDA+WqfUnCKmN79MsZ/qo5Ve+VrJNyBhhQD1whRG/G0cFHvzA4oa2n5q UJ6KAAjLDDdG0zWd/Ig+KIXusDHHFyv65jaPMb0e9VLcMHhBl4uPZigVC64Q/SUA jrRT82PN2QA4hcDFwTmQ1xVzjXfsRfTCUvCVleYm/nU5tE7HAkIfwTDVTn3i7usd enoQmk08EDI6sM8fqq+vm0JuX8Lu/XzInQtegZswi4S8qR3dwwAxIVwabHc7CVse S2YIW+tWGaID2G1bFhHs5LnhqvlPsQD64o5Dft2orLkPGx0Rp7e2hfiBB3ghuloM Kk9lxtUa+Hw/gpQMuuk/X3jaBFQXEBa62P2vqqUicUH/Hj5y80MHbxtH/uQKrSVY FxnJY+D0PZ2ggnDXAkDv6+GGIO9WXVQ+KTGKoQHYJ6tCLUWN+1JiK61WyQ9ewdC1 jE2Tig88hGRdEmTCAKZjUmLVuoNqnU7knKHaslg7+2lSAj1jpCE= =yAyj -----END PGP SIGNATURE----- Merge tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC drivers for v6.8 There's only one set of changes here, the addition of "Auto Update" support for PolarFire SoC. Auto Update is one of the ways that the FPGA bitstream can be updated, and the only one suitable for use from Linux as it does not immediately initiate a reboot when started. The driver was not accepted in the FPGA manager subsystem as the update only occurs after a reboot and makes no use of the FPGA manager framework. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: add auto-update driver to mpfs entry firmware: microchip: Replace of_device.h with explicit include firmware: microchip: add PolarFire SoC Auto Update support soc: microchip: mpfs: add auto-update subdev to system controller soc: microchip: mpfs: print service status in warning message soc: microchip: mpfs: enable access to the system controller's flash dt-bindings: soc: microchip: add a property for system controller flash firmware_loader: Expand Firmware upload error codes with firmware invalid error Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Herve Codina
|
7a2ee1576d |
soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime
Introduce qmc_chan_{get,set}_ts_info() function to allow timeslots modification at runtime. The modification is provided using qmc_chan_set_ts_info() and will be applied on next qmc_chan_start(). qmc_chan_set_ts_info() must be called with the channel rx and/or tx stopped. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20231205152116.122512-18-herve.codina@bootlin.com |
||
Herve Codina
|
ba3b7e4753 |
soc: fsl: cpm1: qmc: Add support for child devices
QMC child devices support is needed to avoid orphan DT nodes that use a simple DT phandle to reference a QMC channel. Allow to instantiate child devices and also extend the API to get the qmc_chan using a child device. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Link: https://lore.kernel.org/r/20231205152116.122512-7-herve.codina@bootlin.com |
||
Herve Codina
|
0e034aec5b |
soc: fsl: cpm1: qmc: Extend the API to provide Rx status
In HDLC mode, some status flags related to the data read transfer can be set by the hardware and need to be known by a QMC consumer for further analysis. Extend the API in order to provide these transfer status flags at the read complete() call. In TRANSPARENT mode, these flags have no meaning. Keep only one read complete() API and update the consumers working in transparent mode. In this case, the newly introduced flags parameter is simply unused. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/20231205152116.122512-5-herve.codina@bootlin.com |
||
Dang Huynh
|
4773d2f1a5 |
mfd: qcom-spmi-pmic: Add support for PM8937
Add the subtype and compatible strings for PM8937. The PM8937 is found in various SoCs, including MSM8917, MSM8937, MSM8940 and APQ variants. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Dang Huynh <danct12@riseup.net> Link: https://lore.kernel.org/r/20231121-pm8937-v2-1-b0171ab62075@riseup.net Signed-off-by: Lee Jones <lee@kernel.org> |
||
Conor Dooley
|
742aa6c563 |
soc: microchip: mpfs: enable access to the system controller's flash
The system controller has a flash that contains images used to reprogram the FPGA using IAP (In-Application Programming). Introduce a function that allows a driver with a reference to the system controller to get one to a flash device attached to it. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
Ashish Mhetre
|
fe3b082a6e |
memory: tegra: Add SID override programming for MC clients
For some devices the bootloader/firmware may set up the device in
bypass. Memory clients like display needs kernel to program SID after
resume because bootloader/firmware programs the SID of display device to
bypass. In order to make sure that kernel IOMMU mappings for these
devices work after resume, add SID override programming support for all
memory clients on memory controller resume.
This partially reverts 'commit
|
||
Linus Torvalds
|
4bbdb725a3 |
IOMMU Updates for Linux v6.7
Including: - Core changes: - Make default-domains mandatory for all IOMMU drivers - Remove group refcounting - Add generic_single_device_group() helper and consolidate drivers - Cleanup map/unmap ops - Scaling improvements for the IOVA rcache depot - Convert dart & iommufd to the new domain_alloc_paging() - ARM-SMMU: - Device-tree binding update: - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC - SMMUv2: - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs - SMMUv3: - Large refactoring of the context descriptor code to move the CD table into the master, paving the way for '->set_dev_pasid()' support on non-SVA domains - Minor cleanups to the SVA code - Intel VT-d: - Enable debugfs to dump domain attached to a pasid - Remove an unnecessary inline function. - AMD IOMMU: - Initial patches for SVA support (not complete yet) - S390 IOMMU: - DMA-API conversion and optimized IOTLB flushing - Some smaller fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmVJFcEACgkQK/BELZcB GuMgDxAAsnYVQjQ7wRkwR0rHARuEaJ+Lz2vkLNH+uYXjBzhFe2bT+ykMcZysAkdK A5PMLOFT5Etf+PAqOM0CoIGQFOefAId6uGl7S61Fp9ZWDKhMrOBFWhxGOaufA1Du tNvt3i66hwPSDZa82kY3wRCluYtj0aBBzmM6ZTwBwFZdQ7LABMtE8OxisqncVvq0 H6vhV213fqvhCFSQJ6PnTAEiv70WvWBWygA+Z/gwYf9hypZQae91PNXdK9313a9z OvCzGBkL/R5/3KkJd88UhFwyYzyNGxq/DmH1etawYR5gYZ8UT/Z/sYpcx9hlO7qr eENPqeQc+YHZXpKqkaq66HBA1FSnXUqRZLl4cVaZahRRMe/yArsBM6R0W1AfkMAR rZxwHKoHUWeuHQLMVvmSDNL57h/GJJpTXjRc8HMxLZkVp+ScvnT5XCYHWWzRdCdx TcC/pJ1tet0FQ8rw09ovlwpGVA6eojWvcpVbLVLfGN8ZWViSVfvNFoPNb7HsGK6M iRi+L41Y7s63cyogC/Gsae2RAvYv29ZpvE91lmon2u+VBlTpMdOFX9EhWS6RqOBF cV30bhsw0dyCB7v5jDPtABYEOaR6l1mPLhn1gX3u0Ue/tmPhLX69k4bVWBY6wP3p gmmJD9ub8FuPQtFCGPE7/8ZINjGGrfiKO24DNI2Ty3XEeq21hU4= =UyWC -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Make default-domains mandatory for all IOMMU drivers - Remove group refcounting - Add generic_single_device_group() helper and consolidate drivers - Cleanup map/unmap ops - Scaling improvements for the IOVA rcache depot - Convert dart & iommufd to the new domain_alloc_paging() ARM-SMMU: - Device-tree binding update: - Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC - SMMUv2: - Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs - SMMUv3: - Large refactoring of the context descriptor code to move the CD table into the master, paving the way for '->set_dev_pasid()' support on non-SVA domains - Minor cleanups to the SVA code Intel VT-d: - Enable debugfs to dump domain attached to a pasid - Remove an unnecessary inline function AMD IOMMU: - Initial patches for SVA support (not complete yet) S390 IOMMU: - DMA-API conversion and optimized IOTLB flushing And some smaller fixes and improvements" * tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits) iommu/dart: Remove the force_bypass variable iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging() iommu/dart: Convert to domain_alloc_paging() iommu/dart: Move the blocked domain support to a global static iommu/dart: Use static global identity domains iommufd: Convert to alloc_domain_paging() iommu/vt-d: Use ops->blocked_domain iommu/vt-d: Update the definition of the blocking domain iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain Revert "iommu/vt-d: Remove unused function" iommu/amd: Remove DMA_FQ type from domain allocation path iommu: change iommu_map_sgtable to return signed values iommu/virtio: Add __counted_by for struct viommu_request and use struct_size() iommu/vt-d: debugfs: Support dumping a specified page table iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid} iommu/vt-d: debugfs: Dump entry pointing to huge page iommu/vt-d: Remove unused function iommu/arm-smmu-v3-sva: Remove bond refcount iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle iommu/arm-smmu-v3: Rename cdcfg to cd_table ... |
||
Linus Torvalds
|
babe393974 |
The number of commits for documentation is not huge this time around, but
there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations. - The much-discussed documentation of the confidential-computing threat model. - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn. - A large traditional-Chinese documentation update. - A new document on backporting and conflict resolution. - Some kernel-doc and Sphinx fixes. Plus the usual smattering of smaller updates and typo fixes. -----BEGIN PGP SIGNATURE----- iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmVBNv8PHGNvcmJldEBs d24ubmV0AAoJEBdDWhNsDH5Y0JkH/36MOpkaDnsY69/dMRKSuD4mAAP2H6LS8V63 SsMgH5VCj8lcy/Tz1+J89t14pbcX8l0viKxSo4UxvzoJ5snrz8A8gZ9oqY7NCcNs nMtolnN5IwdbgGnEGqASSLsl07lnabhRK0VYv9ZO7lHjYQp97VsJ/qrjJn385HFE vYW8iRcxcKdwtuuwOtbPcdAMjP54saJdNC5wMLsfMR0csKcGbzaSNpqpiGovzT7l phG2DSxrJH0gUZyeGPryroNppaf+mVKSDSiwRdI8mzm0J67p6dZYYwBS1Iw6Awbf 8iYoj6W63/FVQbXffPx5d6ffOSQh4JkAskxgBUOzluSGusSDc+4= =9HU5 -----END PGP SIGNATURE----- Merge tag 'docs-6.7' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "The number of commits for documentation is not huge this time around, but there are some significant changes nonetheless: - Some more Spanish-language and Chinese translations - The much-discussed documentation of the confidential-computing threat model - Powerpc and RISCV documentation move under Documentation/arch - these complete this particular bit of documentation churn - A large traditional-Chinese documentation update - A new document on backporting and conflict resolution - Some kernel-doc and Sphinx fixes Plus the usual smattering of smaller updates and typo fixes" * tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits) scripts/kernel-doc: Fix the regex for matching -Werror flag docs: backporting: address feedback Documentation: driver-api: pps: Update PPS generator documentation speakup: Document USB support doc: blk-ioprio: Bring the doc in line with the implementation docs: usb: fix reference to nonexistent file in UVC Gadget docs: doc-guide: mention 'make refcheckdocs' Documentation: fix typo in dynamic-debug howto scripts/kernel-doc: match -Werror flag strictly Documentation/sphinx: Remove the repeated word "the" in comments. docs: sparse: add SPDX-License-Identifier docs/zh_CN: Add subsystem-apis Chinese translation docs/zh_TW: update contents for zh_TW docs: submitting-patches: encourage direct notifications to commenters docs: add backporting and conflict resolution document docs: move riscv under arch docs: update link to powerpc/vmemmap_dedup.rst mm/memory-hotplug: fix typo in documentation docs: move powerpc under arch PCI: Update the devres documentation regarding to pcim_*() ... |
||
Linus Torvalds
|
385903a7ec |
SoC driver updates for 6.7
The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVC10IACgkQYKtH/8kJ UifFoQ//Tw7aux88EA2UkyL2Wulv80NwRQn3tQlxI/6ltjBX64yeQ6Y8OzmYdSYK 20NEpbU7VWOFftN+D6Jp1HLrvfi0OV9uJn3WiTX3ChgDXixpOXo4TYgNNTlb9uZ4 MrSTG3NkS27m/oTaCmYprOObgSNLq1FRCGIP7w4U9gyMk9N9FSKMpSJjlH06qPz6 WBLTaIwPgBsyrLfCdxfA1y7AFCAHVxQJO4bp0VWSIalTrneGTeQrd2FgYMUesQ2e fIUNCaU4mpmj8XnQ/W19Wsek8FRB+fOh0hn/Gl+iHYibpxusIsn7bkdZ5BOJn2J0 OY3C1biopaaxXcZ+wmnX9X0ieZ3TDsHzYOEf0zmNGzMZaZkV8kQt4/Ykv77xz6Gc 4Bl6JI5QZ4rTZvlHYGMYxhy3hKuB31mO2rHbei7eR7J7UmjzWcl5P6HYfCgj7wzH crIWj1IR1Nx6Dt/wXf3HlRcEiAEJ2D0M3KIFjAVT239TsxacBfDrRk+YedF2bKbn WMYfVM6jJnPOykGg/gMRlttS/o/7TqHBl3y/900Idiijcm3cRPbQ+uKfkpHXftN/ 2vOtsw7pzEg7QQI9GVrb4drTrLvYJ7GQOi4o0twXTCshlXUk2V684jvHt0emFkdX ew9Zft4YLAYSmuJ3XqGhhMP63FsHKMlB1aSTKKPeswdIJmrdO80= =QIut -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "The highlights for the driver support this time are - Qualcomm platforms gain support for the Qualcomm Secure Execution Environment firmware interface to access EFI variables on certain devices, and new features for multiple platform and firmware drivers. - Arm FF-A firmware support gains support for v1.1 specification features, in particular notification and memory transaction descriptor changes. - SCMI firmware support now support v3.2 features for clock and DVFS configuration and a new transport for Qualcomm platforms. - Minor cleanups and bugfixes are added to pretty much all the active platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive, amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and more. In particular, this contains portions of the treewide conversion to use __counted_by annotations and the device_get_match_data helper" * tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits) soc: qcom: pmic_glink_altmode: Print return value on error firmware: qcom: scm: remove unneeded 'extern' specifiers firmware: qcom: scm: add a missing forward declaration for struct device firmware: qcom: move Qualcomm code into its own directory soc: samsung: exynos-chipid: Convert to platform remove callback returning void soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size() soc: qcom: pmic_glink: fix connector type to be DisplayPort soc: ti: k3-socinfo: Avoid overriding return value soc: ti: k3-socinfo: Fix typo in bitfield documentation soc: ti: knav_qmss_queue: Use device_get_match_data() firmware: ti_sci: Use device_get_match_data() firmware: qcom: qseecom: add missing include guards soc/pxa: ssp: Convert to platform remove callback returning void soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void soc/mediatek: mtk-devapc: Convert to platform remove callback returning void soc/loongson: loongson2_guts: Convert to platform remove callback returning void soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void ... |
||
Sascha Hauer
|
481d97ba61 |
PM / devfreq: rockchip-dfi: add support for RK3588
Add support for the RK3588 to the driver. The RK3588 has four DDR channels with a register stride of 0x4000 between the channel registers, also it has a DDRMON_CTRL register per channel. Link: https://lore.kernel.org/all/20231018061714.3553817-20-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sascha Hauer
|
4d586b5724 |
PM / devfreq: rockchip-dfi: Add perf support
The DFI is a unit which is suitable for measuring DDR utilization, but so far it could only be used as an event driver for the DDR frequency scaling driver. This adds perf support to the DFI driver. Usage with the 'perf' tool can look like: perf stat -a -e rockchip_ddr/cycles/,\ rockchip_ddr/read-bytes/,\ rockchip_ddr/write-bytes/,\ rockchip_ddr/bytes/ sleep 1 Performance counter stats for 'system wide': 1582524826 rockchip_ddr/cycles/ 1802.25 MB rockchip_ddr/read-bytes/ 1793.72 MB rockchip_ddr/write-bytes/ 3595.90 MB rockchip_ddr/bytes/ 1.014369709 seconds time elapsed perf support has been tested on a RK3568 and a RK3399, the latter with dual channel DDR. Link: https://lore.kernel.org/all/20231019064819.3496740-1-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [cw00.choi: Fix typo from 'write_acccess' to 'write_access'] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sascha Hauer
|
d8c6e337e7 |
PM / devfreq: rockchip-dfi: Handle LPDDR4X
In the DFI driver LPDDR4X can be handled in the same way as LPDDR4. Add the missing case. Link: https://lore.kernel.org/all/20231018061714.3553817-13-s.hauer@pengutronix.de/ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sascha Hauer
|
076b0597f5 |
PM / devfreq: rockchip-dfi: Add RK3568 support
This adds RK3568 support to the DFI driver. Only iniitialization differs from the currently supported RK3399. Link: https://lore.kernel.org/all/20231018061714.3553817-11-s.hauer@pengutronix.de/ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sascha Hauer
|
74002e668d |
PM / devfreq: rk3399_dmc,dfi: generalize DDRTYPE defines
The DDRTYPE defines are named to be RK3399 specific, but they can be used for other Rockchip SoCs as well, so replace the RK3399_PMUGRF_ prefix with ROCKCHIP_. They are defined in a SoC specific header file, so when generalizing the prefix also move the new defines to a SoC agnostic header file. While at it use GENMASK to define the DDRTYPE bitfield and give it a name including the full register name. Link: https://lore.kernel.org/all/20231018061714.3553817-9-s.hauer@pengutronix.de/ Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> |
||
Sumit Gupta
|
ea608a01d4 |
firmware: tegra: Add suspend hook and reset BPMP IPC early on resume
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes:
|
||
Deming Wang
|
bde3ce7257 |
firmware: tegra: Fix a typo
successfully, not 'succesfully' Signed-off-by: Deming Wang <wangdeming@inspur.com> Signed-off-by: Thierry Reding <treding@nvidia.com> |
||
Costa Shulyupin
|
17e02586ed |
docs: move powerpc under arch
and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin <costa.shul@redhat.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Jonathan Corbet <corbet@lwn.net> Link: https://lore.kernel.org/r/20230826165737.2101199-1-costa.shul@redhat.com |
||
Jason Gunthorpe
|
c462944901 |
iommu/tegra-gart: Remove tegra-gart
Thierry says this is not used anymore, and doesn't think it makes sense as an iommu driver. The HW it supports is about 10 years old now and newer HW uses different IOMMU drivers. As this is the only driver with a GART approach, and it doesn't really meet the driver expectations from the IOMMU core, let's just remove it so we don't have to think about how to make it fit in. It has a number of identified problems: - The assignment of iommu_groups doesn't match the HW behavior - It claims to have an UNMANAGED domain but it is really an IDENTITY domain with a translation aperture. This is inconsistent with the core expectation for security sensitive operations - It doesn't implement a SW page table under struct iommu_domain so * It can't accept a map until the domain is attached * It forgets about all maps after the domain is detached * It doesn't clear the HW of maps once the domain is detached (made worse by having the wrong groups) Cc: Thierry Reding <treding@nvidia.com> Cc: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/6-v8-81230027b2fa+9d-iommu_all_defdom_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
Linus Torvalds
|
0468be89b3 |
IOMMU Updates for Linux v6.6
Including: - Core changes: - Consolidate probe_device path - Make the PCI-SAC IOVA allocation trick PCI-only - AMD IOMMU: - Consolidate PPR log handling - Interrupt handling improvements - Refcount fixes for amd_iommu_v2 driver - Intel VT-d driver: - Enable idxd device DMA with pasid through iommu dma ops. - Lift RESV_DIRECT check from VT-d driver to core. - Miscellaneous cleanups and fixes. - ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Allow ASIDs to be configured in the DT to work around Qualcomm's broken hypervisor - Fix clocks for Qualcomm's MSM8998 SoC - SMMUv2: - Support for Qualcomm's legacy firmware implementation featured on at least MSM8956 and MSM8976. - Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants - SMMUv3: - Use 'ida' instead of a bitmap for VMID allocation - Rockchip IOMMU: - Lift page-table allocation restrictions on newer hardware - Mediatek IOMMU: - Add MT8188 IOMMU Support - Renesas IOMMU: - Allow PCIe devices - Usual set of cleanups an smaller fixes -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmTx7IMACgkQK/BELZcB GuMxUA/+P/wYvAKCbDpXyszIpyCTx37BkeRTBaVqG0vEKLG6439i+PIm3oudQK+6 0y+1clJi0Ddu0uv1ck90cIEP1YDuKaKdrOVeE7TtlK+6LKYxTyeN+mz4csMIbahI 6JMrWzrIEPIyMBHzAepQiGDCsmDkrCngPj0WmA7+EQZSSHVYp+TLe6OLzNs74vDF zCITkYNq6aKyg/dNJpMRy6VOHvw9PUiwRvm7ko7WONP4VCtpW4g3Jpkerf19zoV2 s0nwZuGn3o7F0aFOpRJPPKQNfQnNjOjHdxjcsGBafD9qqAk4TLvnZH24njKtPidJ P8CiAu//HxhDyUPTgTIrDroVOGVG7s85XO+WesjPkEI3vnNjXy+qEIinQBJ3oIaI ppDLSnArEhfSRgt6dXvPCJ/g4+WGS9jNV85GCa7XBtal2Msu8G89NKC97mpmjCkb lnGmCF9t7Tkt/fLWxw4GADBN3m2tOib1GQMvPYAF2WM3jH5aRq2UliIRuCHZkzwv EF3SiFQQqab6oogU9tF/A1QLUKQ8QfYOdabqL9z2COgF5tS00VC6b/6VTNkKeBHe qIiOpI7IWo76tFJule5gRaUth9nVkjpEo6kL9I6rEldOlFJrX6uaHTta6/isY3gx vkN98V/OThRUbDwMD122YVKNNjZE2MNsTeptXqB3jHvl3UWiLsQ= =RV+G -----END PGP SIGNATURE----- Merge tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: "Core changes: - Consolidate probe_device path - Make the PCI-SAC IOVA allocation trick PCI-only AMD IOMMU: - Consolidate PPR log handling - Interrupt handling improvements - Refcount fixes for amd_iommu_v2 driver Intel VT-d driver: - Enable idxd device DMA with pasid through iommu dma ops - Lift RESV_DIRECT check from VT-d driver to core - Miscellaneous cleanups and fixes ARM-SMMU drivers: - Device-tree binding updates: - Add additional compatible strings for Qualcomm SoCs - Allow ASIDs to be configured in the DT to work around Qualcomm's broken hypervisor - Fix clocks for Qualcomm's MSM8998 SoC - SMMUv2: - Support for Qualcomm's legacy firmware implementation featured on at least MSM8956 and MSM8976 - Match compatible strings for Qualcomm SM6350 and SM6375 SoC variants - SMMUv3: - Use 'ida' instead of a bitmap for VMID allocation - Rockchip IOMMU: - Lift page-table allocation restrictions on newer hardware - Mediatek IOMMU: - Add MT8188 IOMMU Support - Renesas IOMMU: - Allow PCIe devices .. and the usual set of cleanups an smaller fixes" * tag 'iommu-updates-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (64 commits) iommu: Explicitly include correct DT includes iommu/amd: Remove unused declarations iommu/arm-smmu-qcom: Add SM6375 SMMUv2 iommu/arm-smmu-qcom: Add SM6350 DPU compatible iommu/arm-smmu-qcom: Add SM6375 DPU compatible iommu/arm-smmu-qcom: Sort the compatible list alphabetically dt-bindings: arm-smmu: Fix MSM8998 clocks description iommu/vt-d: Remove unused extern declaration dmar_parse_dev_scope() iommu/vt-d: Fix to convert mm pfn to dma pfn iommu/vt-d: Fix to flush cache of PASID directory table iommu/vt-d: Remove rmrr check in domain attaching device path iommu: Prevent RESV_DIRECT devices from blocking domains dmaengine/idxd: Re-enable kernel workqueue under DMA API iommu/vt-d: Add set_dev_pasid callback for dma domain iommu/vt-d: Prepare for set_dev_pasid callback iommu/vt-d: Make prq draining code generic iommu/vt-d: Remove pasid_mutex iommu/vt-d: Add domain_flush_pasid_iotlb() iommu: Move global PASID allocation from SVA to core iommu: Generalize PASID 0 for normal DMA w/o PASID ... |
||
Linus Torvalds
|
f8fd5c2483 |
This pull request is full of clk driver changes. In fact, there aren't any
changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmTv2wkRHHNib3lkQGtl cm5lbC5vcmcACgkQrQKIl8bklSW1LRAAuHR2HoyB4bRHmCa1bfOfYYDfSWsBWEav tWIfBl86Nl/Je50Gk2NJ9vqU5OPqRZ57TIniijHHoX5n7/kYcr8KVmlomY07hUeg CzWyothkxg4k7+rQwVAWvmlR2YAVwzHDKcwq7gkMZOnW/y26LXip99cjopu2CJLx zVwTgvWollmd4KVlicnAlx4zUjgNkWR24iA4Lcf5ir+Dr6FYNjxLI+akBA8EPxxi wLixZbScgBSgpGn6KVgoFhclCToPS0gt5m6HfQxJ/svOCU54l+jRKpzkNZGWvyu4 A8t3CRrwL2iS/mfCGk2yRlaKySoLLpjlpW1AI7fHTWbG2P6p8ZphtN7jOeeAEsbq TNpzWEjtY6B/lfRzxxINXkrtLaqmlnFY/P5np5fDrf/61gRFxLFQemyRdY/xCSJf Kwq8ja1mrSGWoDGG9XhDqTf9Yek9LRObNzlDrEmn/i/qLTcxhOIz58pzHg4iAlx5 9HDtnJ8hKg4uE1TtT12Bmasb1+WzG7GYYESNfKWZhCvbRqEUzcDOHk7xpwYa1ffx yZIgMs7Sb/exNW8LMPYmgnyj/f9eo5IdjiQvune+Zy5NrdzfyN6Sf/LSibrqCF2z X5aFHqQrR8+PifD+se+g5HPa0ezSmBIhXzYUTOC6f+nywlrJjhwDXPDYI6Lcd//p r4mpOmJS+G4= =h2Jz -----END PGP SIGNATURE----- Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk subsystem updates from Stephen Boyd: "This pull request is full of clk driver changes. In fact, there aren't any changes to the clk framework this time around. That's probably because everyone was on vacation (yours truly included). We did lose a couple clk drivers this time around because nobody was using those devices. That skews the diffstat a bit, but either way, nothing looks out of the ordinary here. The usual suspects are chugging along adding support for more SoCs and fixing bugs. If I had to choose, I'd say the theme for the past few months has been "polish". There's quite a few patches that migrate to devm_platform_ioremap_resource() in here. And there's more than a handful of patches that move the NR_CLKS define from the DT binding header to the driver. There's even patches that migrate drivers to use clk_parent_data and clk_hw to describe clk tree topology. It seems that the spring (summer?) cleaning bug got some folks, or the semiconductor shortage finally hit the software side. New Drivers: - StarFive JH7110 SoC clock drivers - Qualcomm IPQ5018 Global Clock Controller driver - Versa3 clk generator to support 48KHz playback/record with audio codec on RZ/G2L SMARC EVK Removed Drivers: - Remove non-OF mmp clk drivers - Remove OXNAS clk driver Updates: - Add __counted_by to struct clk_hw_onecell_data and struct spmi_pmic_div_clk_cc - Move defines for numbers of clks (NR_CLKS) from DT headers to drivers - Introduce kstrdup_and_replace() and use it - Add PLL rates for Rockchip rk3568 - Add the display clock tree for Rockchip rv1126 - Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and RZ/G2 SoCs - Convert sun9i-mmc clock to use devm_platform_get_and_ioremap_resource() - Fix function name in a comment in ccu_mmc_timing.c - Parameter name correction for ccu_nkm_round_rate() - Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e. consider alternative parent rates when determining clock rates - Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi - Support finding closest (as opposed to closest but not higher) clock rate for NM, NKM, mux and div type clocks, as use it for Allwinner A64 pll-video0 - Prefer current parent rate if able to generate ideal clock rate for Allwinner NKM clocks - Clean up Qualcomm SMD RPM driver, with interconnect bus clocks moved out to the interconnect drivers - Fix various PM runtime bugs across many Qualcomm clk drivers - Migrate Qualcomm MDM9615 is to parent_hw and parent_data - Add network related resets on Qualcomm IPQ4019 - Add a couple missing USB related clocks to Qualcomm IPQ9574 - Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock controller - In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs, and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are corrected - Add missing GDSCs to and correct GDSCs for the SC8280XP global clock controller driver - Support retention for the Qualcomm SC8280XP display clock controller GDSCs. - Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE to fix issues with missing parent clocks across sc7180, sm7150, sm6350 and sm8250, while sm8450 is corrected to use floor ops - Correct Qualcomm SM6350 GPU clock controller's clock supplies - Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver - Add missing OXILICX GDSC to Qualcomm MSM8226 GCC - Change the delay in the Qualcomm reset controller to fsleep() for correctness - Extend the Qualcomm SM83550 Video clock controller to support SC8280XP - Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and R-Car H3, M3-W, and M3-N SoCs - Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M - Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five - Add the PDM IPC clock for i.MX93 - Add 519.75MHz frequency support for i.MX9 PLL - Simplify the .determine_rate() implementation for i.MX GPR mux - Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource() - Add the audio mux clock to i.MX8 - Fix the SPLL2 MULT range for PLLv4 - Update the SPLL2 type in i.MX8ULP - Fix the SAI4 clock on i.MX8MP - Add silicon revision print for i.MX25 on clocks init - Drop the return value from __mx25_clocks_init() - Fix the clock pauses on no-op set_rate for i.MX8M composite clock - Drop restrictions for i.MX PLL14xx and fix its max prediv value - Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to allow glitch free switching" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits) clk: qcom: Fix SM_GPUCC_8450 dependencies clk: lmk04832: Support using PLL1_LD as SPI readback pin clk: lmk04832: Don't disable vco clock on probe fail clk: lmk04832: Set missing parent_names for output clocks clk: mvebu: Convert to devm_platform_ioremap_resource() clk: nuvoton: Convert to devm_platform_ioremap_resource() clk: socfpga: agilex: Convert to devm_platform_ioremap_resource() clk: ti: Use devm_platform_get_and_ioremap_resource() clk: mediatek: Convert to devm_platform_ioremap_resource() clk: hsdk-pll: Convert to devm_platform_ioremap_resource() clk: gemini: Convert to devm_platform_ioremap_resource() clk: fsl-sai: Convert to devm_platform_ioremap_resource() clk: bm1880: Convert to devm_platform_ioremap_resource() clk: axm5516: Convert to devm_platform_ioremap_resource() clk: actions: Convert to devm_platform_ioremap_resource() clk: cdce925: Remove redundant of_match_ptr() clk: pxa910: Move number of clocks to driver source clk: pxa1928: Move number of clocks to driver source clk: pxa168: Move number of clocks to driver source clk: mmp2: Move number of clocks to driver source ... |
||
Linus Torvalds
|
a1c19328a1 |
ARM: SoC cleanups for 6.6
These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTuaDEACgkQYKtH/8kJ UicmKQ/6A506T45KbbCLsqMuJsGdjMdOKdBecssLWhFNhRoJhJB6YilQVjBUAK4D vDqc425IcxXwaW+4OVBFCgVpKKMlrLSpHVJHl6QaGsxAZt5xdhwcA4ttQcFvoQtK csuwOadO9g1K4Px29J8GFR/FvFNt8kHRxbRC3xcGfFsFvgXISAiLUv8w6Z5O8Z5W /sp+EsOkJWTTKu+vtcMXccGqM9eGNOfPK1bCUElJ1+HW3jZrbRw0zZrQ2QS72N2P wpO2f6JUTpiiMH8XhQd3REi3Kli+g0GxVlCStZc/0qf/uW70YanF4CPDdSOVJ5OL l05Qfx+/XsGyqt3el03UoIXfM1YzvWn5BeqNG/QGHkai7Lp/c8LvSk1NiwaS0dzi QcPCEK67wjoaBCdSAMKGYM/qlmffuLh9/NJM5dzdBE8zQ5rC1XorR2aHGyISQJt6 tDlDXy14zyR3KRxOoqP6cWp+PFDcBksd44cxGbp/Lcc389UKxX8j4fM8yUNT+4Rh gZ5OtUMs5QhFJBhBbBxW6O3TMuhwjSdW7IEQafKiiHEOFucf6Zcxd9u9B2yzsdtU za6mpA/NEBIc3olv6IFIdT24+M3PLhqCbu6YL5YI4jBf0QNpXjRBr+EOtvt2mvC9 JkoggyCf5LdDt833G/TBPpx0VYi8h0m7cQnMw4JjOIA8FvCwIdc= =c9NM -----END PGP SIGNATURE----- Merge tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC cleanups from Arnd Bergmann: "These are all minor cleanups for platform specific code in arch/arm/ and some of the associated drivers. The majority of these are work done by Rob Herring to improve the way devicetreee header files are handled" * tag 'soc-arm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (49 commits) ARM: davinci: Drop unused includes ARM: s5pv210: Explicitly include correct DT includes ARM: dove: Drop unused includes ARM: mvebu: Explicitly include correct DT includes Documentation/process: maintainer-soc: document dtbs_check requirement for Samsung MAINTAINER: samsung: document dtbs_check requirement for Samsung Documentation/process: maintainer-soc: add clean platforms profile MAINTAINERS: soc: reference maintainer profile ARM: nspire: Remove unused header file mmio.h ARM: nspire: Use syscon-reboot to handle restart soc: fsl: Explicitly include correct DT includes soc: xilinx: Explicitly include correct DT includes soc: sunxi: Explicitly include correct DT includes soc: rockchip: Explicitly include correct DT includes soc: mediatek: Explicitly include correct DT includes soc: aspeed: Explicitly include correct DT includes firmware: Explicitly include correct DT includes bus: Explicitly include correct DT includes ARM: spear: Explicitly include correct DT includes ARM: mvebu: Explicitly include correct DT includes ... |
||
Yue Haibing
|
49e62a0462 |
net: mscc: ocelot: Remove unused declarations
Commit |
||
Joerg Roedel
|
d8fe59f110 | Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/rockchip', 'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next | ||
Martin Kaiser
|
b8a06b125c |
clk: imx25: print silicon revision during init
Print the imx25 silicon revision when the clocks are initialised. Use the same mechanism as for imx27, i.e. call mx25_revision. This function is unused at the moment. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230802184046.153394-2-martin@kaiser.cx Signed-off-by: Abel Vesa <abel.vesa@linaro.org> |
||
Arnd Bergmann
|
61029e2b37 |
AT91 SoC updates for 6.6:
It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h -----BEGIN PGP SIGNATURE----- iI8EABYIADcWIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZMx+PxkcY2xhdWRpdS5i ZXpuZWFAZ21haWwuY29tAAoJEJ6OuD83Zfv9RHAA/jMPJ6uQKDDP9iYzJD4moCC2 H614pQHGJx8PLnxt7kPaAP4xrN1l9+Yo0+31r8bDSjGBksmOK0g262shKXgsY79G AA== =ab+a -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTXQ7MACgkQYKtH/8kJ Uidn1BAAuEEA+N3YAf6gRBQ7xJ1y+UuZr945SjKWZtU4gvKB04a8N1VdIGMUCP5Z QlmaXbMwrALPfs4oqu4NmjI5MsB9IZNLKb35C5LUAltHTfaG36FLmbrs0kIbQ6I9 ES3Sr5rHM+ec7RewbuVqx3DK4VzJJQN++CECTkRH9j6cGkGIGRyCtD3jHp+LROv0 73UJ0Iv7FBkDNprhhCjhSQwUiTb0kHiRORhOnvle6JcnIYHaN41/qL1M0VRVBmsb HQAT2KH7c2Br9hSTNYBJG77RXNt50CNIM5fviGFTQw+d6OugDjNwsrRzKFrM4uR+ XDHAAL9GK/QEZ2UClCuYY8q1oezoVeUjUZw70PzU8I6lXDi9373pY1E/K3HIG7WZ y7NrWLGCzxpc2/OBBNl57hiMbqdnV+a+53VMpKLtjobt3xHVMzpoluf1KRKcqf9Z SmOYV8wZs+pCAtTYBj5+RfQuLfTmJHRbSB42DHMWncHt5hRbGmAvTLMEPFy7Gyyw ogKN2VsqViQS0C5pI0EO4119Pv4OPJzJP1qvmtZgZbwMj7WVLaOq3tri6fNuIIsy Uy+uuEFyppAsegJ7VQmpsk8ql+R0XAc0fk8hw+iob+S0hPPBoSEtemL8mkYurTuN WeKTk1AHPtl5Ty7Fvo32G38SDxwuuBbc67IbiPzN44UZ6gATa+g= =8ksf -----END PGP SIGNATURE----- Merge tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/arm AT91 SoC updates for 6.6: It contains: - explicitly include correct DT includes from Rob - one cleanup which removes unused extern declaration on atmel_tcb.h * tag 'at91-soc-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: at91: Remove unused extern declarations ARM: at91: Explicitly include correct DT includes soc: microchip: Explicitly include correct DT includes Link: https://lore.kernel.org/r/20230804044118.231478-1-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Chengci.Xu
|
946e719ce6 |
iommu/mediatek: Add enable IOMMU SMC command for INFRA masters
Prepare for MT8188. In MT8188, the register which enables IOMMU for INFRA masters are in the secure world for security concerns, therefore we add a SMC command for INFRA masters to enable IOMMU in ATF. Signed-off-by: Chengci.Xu <chengci.xu@mediatek.com> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/20230602090227.7264-5-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
YueHaibing
|
96a49448c4 |
ARM: at91: Remove unused extern declarations
commit
|
||
Arnd Bergmann
|
b1e052903c |
Memory controller drivers - fixes for v6.5
Two fixes are needed for Tegra194 memory controllers caused by the same Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now interconnect from the memory controller, which was set only for Tegra234, but not for Tegra194, causing probe deferrals. Expose some dummy interconnect provider for Tegra194, to satisfy PCI driver needs. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmTA3VAQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD1zj9D/4peXLyTUWFArNLAaq3PbOHQRuPbC1MMdWN VRCqjDVGNXEYPnbh1b2kMhi2iwoBk9HeAt6HFYHgABdNZBK5VBUMDuJnT1ocNExD 8OBV3qAM+ia3TqOlhE5PVGiMudhd1R020/tIrzHB+YaiT2JpqKXo8nlXVfhwti1c yyZmIAmi9uQkC3Zn7R+5I0A5atNLa7BXAmpy8A/l7K8ojwnAxiJLXAI/+YHs0moW GPB9Nk4oYzEJDyQESKNK0ddvggwaZNCbK+wIBcEBFXXvybVr72pMYSeIG+UNpTf+ uwc5nxgHwhqNTxO4WtGYpVuAA8uPelJ4YIbcEdoJoNn5/dfzdiBYhetWPquOBMxN p1BIVx/pFujzAAjY2VvPAEbSxctMUKmLmRRAbJC3II633JxjwKahVMTOCslvtuSr /jbChJ4Ih2RL15qMmj2O/mP2qjivG/HoywtG3Rp4w5E6CfWXs3b6ytEKdifW9IEk GjctklZm1E8Jz+nVhmPfm1A+pLxG80RMEgV9kp5bEjdeNjE/SQByTlhCxP/1SSHA yT4RO3GFdBFKjpfl2xK1f74ml/ZA9KOu8WO+laD0gZVfMzX68wQWc2jIpJYtPhtO p8n8zzC2fEbzvY1Adth7XR79P1e/3yp2NZv1vTRIP6T4y+d8e2v2mqNxZxH/SFRj PS2KDX7VMw== =1ARR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmTCc+YACgkQYKtH/8kJ UifQjQ//bIgDWLc6LsU0wnF8CEScqAxvTmXMXq0tp8o55uvUjdCjdNHRkrxQuPff /vfXJAhzvLlsovR/DghTeex8V1O1285TDt20J0UXXA7PdGTzvpjjW/+qH8OmmRDV IvP8WUWHHbgazJZaayYMLn5uAf1Ofz8ZzTkbrdYKQ9eORhwdMWC6bDNJHZF2cxEa X82FGvYL270x4IhIQpt5yg5aDFKCX6n/SEYb8H3kX61qb1TIQ1Yo3Fsr0Wr7L/1Y 6esl0zmMo7k0Jv9+9wA3u6AhYoYq6F9EvaQk9MdizG2h44o7MiO7SrSoEHuFbMbp NAyah59WSSiFV3GL9oKchgKFVqXwqiF0YZJyNTetbg70AK3Q9Yu0CDVuQFKvLtkN jh3t3XxBkX8YizDQQCCkxULEaqR2UpamoHXnnt84L4g92hYRLv0wXGWLQrAxKzIP jU+foYfkAfglfpdGI9pvz0gqdsvTfmFKKoLdlkCwgckWkydq9ZuVkAmuYFN17v2o /ihwqgZHFBZeXbLGmplb0uAHOJ7NymyNjVOSK+1C7m1WOcX4k43/MGk8KVYTuWXF V7PwiG2miUbUwkqRTUTsu+S4G7rF5MM8NoT8jLWHvlVqdig8Z5hbyvV2jPaLgEbT Z0lpoRNhBa5UP1Wgu0LNkuHPPCA7J0VVqnTCf1Wj7HrS7/rn57M= =NC+w -----END PGP SIGNATURE----- Merge tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into arm/fixes Memory controller drivers - fixes for v6.5 Two fixes are needed for Tegra194 memory controllers caused by the same Tegra PCI commit merged in v6.5-rc1. The Tegra PCI requires now interconnect from the memory controller, which was set only for Tegra234, but not for Tegra194, causing probe deferrals. Expose some dummy interconnect provider for Tegra194, to satisfy PCI driver needs. * tag 'memory-controller-drv-fixes-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: memory: tegra: make icc_set_bw return zero if BWMGR not supported memory: tegra: Add dummy implementation on Tegra194 Link: https://lore.kernel.org/r/20230726084811.124038-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Thierry Reding
|
d1478aea64 |
memory: tegra: Add dummy implementation on Tegra194
With the introduction of commit |
||
Vladimir Oltean
|
c60819149b |
net: dsa: felix: make vsc9959_tas_guard_bands_update() visible to ocelot->ops
In a future change we will need to make ocelot_port_update_active_preemptible_tcs() call vsc9959_tas_guard_bands_update(), but that is currently not possible, since the ocelot switch lib does not have access to functions private to the DSA wrapper. Move the pointer to vsc9959_tas_guard_bands_update() from felix->info (which is private to the DSA driver) to ocelot->ops (which is also visible to the ocelot switch lib). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Message-ID: <20230705104422.49025-3-vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> |