Get rid of private "nmi_save_areas" slab cache. The only reason this was
introduced years ago was that with some slab debugging options allocations
would only guarantee a minimum alignment of ARCH_KMALLOC_MINALIGN, which
was eight bytes back then. This is not sufficient for the extended machine
check save area.
However since commit 59bb47985c ("mm, sl[aou]b: guarantee natural
alignment for kmalloc(power-of-two)") kmalloc guarantees a power-of-two
alignment even with debugging options enabled.
Therefore the private slab cache can be removed.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Checking for storage errors in machine check entry code was done in order
to handle also storage errors on kernel page tables. However this is
extremely unlikely and some basic assumptions what works on machine check
entry are necessary anyway. In order to simplify machine check handling
delay checking for storage errors to C code.
With this also change the machine check new PSW to have DAT on, which
simplifies the entry code even further.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
In case a system will be stopped because of e.g. missing validity bits
print the machine check interruption code before the system is stopped.
This is helpful, since up to now no message was printed in such a
case. Only a disabled wait PSW was loaded, which doesn't give a hint of
what went wrong.
Improve this by printing a message with debug information.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Introduce sclp_emergency_printk() which can be used to emit a message
in emergency cases. sclp_emergency_printk() is only supposed to be
used in cases where it can be assumed that regular console device
drivers may not work anymore.
For example this may be the case for unrecoverable machine checks.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Keep sclp_early_sccb so it can also be used after initdata has been
freed. This is a prerequisite to allow printing a message from the
machine check handler.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
If a machine check happens in kernel mode, and the machine check
interruption code indicates that e.g. vector register contents in the
machine check area are not valid, the logic is to kill current.
The idea behind this was that if within kernel context vector
registers are not used then it is sufficient to kill the current user
space process to avoid that it continues with potentially corrupt
register contents. This however does not necessarily work, since the
current code does not take into account that a machine check can also
happen when a kernel thread is running (= no user space context), and
in addition there is no way to distinguish between the "previous" and
"next" user process task, if the machine check happens when a task
switch happens.
Given that machine checks with invalid saved register contents in the
machine check save area are extremely rare, simplify the logic: if
register contents are invalid and the previous context was kernel
mode, stop the whole machine. If the previous context was user mode,
kill the corresponding task.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use vector instruction macros instead of byte patterns to increase
readability. The generated code is nearly identical:
- 1e8: e7 0f 10 00 00 36 vlm %v0,%v15,0(%r1)
- 1ee: e7 0f 11 00 0c 36 vlm %v16,%v31,256(%r1)
+ 1e8: e7 0f 10 00 30 36 vlm %v0,%v15,0(%r1),3
+ 1ee: e7 0f 11 00 3c 36 vlm %v16,%v31,256(%r1),3
By using the VLM macro the alignment hint is automatically specified
too. Even though from a performance perspective it doesn't matter at
all for the machine check code, this shows yet another benefit when
using the macros.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The vector instruction macros can also be used in inline assemblies. For
this the magic
asm(".include \"asm/vx-insn.h\"\n");
must be added to C files in order to avoid that the pre-processor
eliminates the __ASSEMBLY__ guarded macros. This however comes with the
problem that changes to asm/vx-insn.h do not cause a recompile of C files
which have only this magic statement instead of a proper include statement.
This can be observed with the arch/s390/kernel/fpu.c file.
In order to fix this problem and also to avoid that the include must
be specified twice, add a wrapper include header file which will do
all necessary steps.
This way only the vx-insn.h header file needs to be included and changes to
the new vx-insn-asm.h header file cause a recompile of all dependent files
like it should.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
octal values are easier to read and checkpatch also recommends
to use them, so replace all the S_* macros with their counterparts.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This adds support to use ECKD disks as dump device
to linux. The new dump type is called 'eckd_dump', parameters
are the same as for eckd ipl.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This adds support to IPL from ECKD DASDs to linux.
It introduces a few sysfs files in /sys/firmware/reipl/eckd:
bootprog: the boot program selector
clear: whether to issue a diag308 LOAD_NORMAL or LOAD_CLEAR
device: the device to ipl from
br_chr: Cylinder/Head/Record number to read the bootrecord from.
Might be '0' or 'auto' if it should be read from the
volume label.
scpdata: data to be passed to the ipl'd program.
The new ipl type is called 'eckd'.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The CCW data address created by vfio-ccw is that of an IDAL
built by this code. Since this address is used by real hardware,
it should be a physical address rather than a virtual one.
Let's clarify it as such in the ORB.
Similarly, once the I/O has completed the memory for that IDAL
needs to be released, so convert the CCW data address back to
a virtual address so that kfree() can process it.
Note: this currently doesn't fix a real bug, since virtual
addresses are identical to physical ones.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121165836.283781-3-farman@linux.ibm.com
The ORB's interrupt parameter field is stored unmodified into the
interruption code when an I/O interrupt occurs. As this reflects
a real device, let's store the physical address of the subchannel
struct so it can be used when processing an interrupt.
Note: this currently doesn't fix a real bug, since virtual
addresses are identical to physical ones.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
[EF: Updated commit message]
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20221121165836.283781-2-farman@linux.ibm.com
This is the s390 variant of commit d911c67e10 ("x86: kasan: kmsan:
support CONFIG_GENERIC_CSUM on x86, enable it for KASAN/KMSAN"). Even
though most of the s390 specific checksum code is written in C there is
still the csum_partial() inline assembly which could prevent KASAN and
KMSAN from seeing all memory accesses.
Therefore switch to GENERIC_CSUM if KASAN is enabled just like x86.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Support for power managemant has been removed from s390 since quite
some time. Therefore remove unused power managemant code from the
appldata device driver.
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This does not fix a real bug, since virtual addresses
are currently indentical to physical ones.
Use virt_to_phys() for intparm interrupt parameter to
convert a 64-bit virtual address to the 32-bit physical
address, which is expected to be below 2GB.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Make sclp's con_drop sysfs attribute also writable, and allow to
change its value during runtime. This way handling of sclp console
drop handling is consistent with the 3215 device driver.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use sysfs_emit() for all sclp sysfs show functions, which is the
current standard way to generate output strings.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use kstrobool() to parse sclp_con_drop parameter. This way handling of
valid values for the sclp_con_drop parameter is identical to the
con3215_drop parameter. In particular this allows to pass values like
"yes" and "true", which was not possible before.
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
If CONFIG_TN3270_CONSOLE is not enabled clang emits the following warning:
drivers/s390/char/raw3270.c:114:19:
error: unused function 'raw3270_state_final' [-Werror,-Wunused-function]
static inline int raw3270_state_final(struct raw3270 *rp)
Get rid of this warning by making raw3270_state_final() only
available if CONFIG_TN3270_CONSOLE is enabled.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
clang warns about an unused insn cache ops function:
arch/s390/kernel/kprobes.c:34:1:
error: unused function 'is_kprobe_s390_insn_slot' [-Werror,-Wunused-function]
DEFINE_INSN_CACHE_OPS(s390_insn);
^
./include/linux/kprobes.h:335:20: note: expanded from macro 'DEFINE_INSN_CACHE_OPS'
static inline bool is_kprobe_##__name##_slot(unsigned long addr) \
^
<scratch space>:88:1: note: expanded from here
is_kprobe_s390_insn_slot
^
Move the definition to a private header file, which is also similar to
the generic insn cache ops.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
clang warns about an incompatible function type cast:
CC arch/s390/kernel/debug.o
arch/s390/kernel/debug.c:142:2: error: cast from 'int (*)(debug_info_t *, struct debug_view *, char *, debug_sprintf_entry_t *)' (aka 'int (*)(struct debug_info *, struct debug_view *, char *, debug_sprintf_entry_t *)') to 'debug_format_proc_t *' (aka 'int (*)(struct debug_info *, struct debug_view *, char *, const char *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
(debug_format_proc_t *)&debug_sprintf_format_fn,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Get rid of this warning by changing debug_sprintf_format_fn() so it matches
the debug_format_proc_t function type, and do the cast of the last
parameter within the function itself.
This is the standard way of handling such cases anyway.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
No point in doing another lookup of irq_data, it's already provided as
an argument.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/linux-s390/8735aoui07.ffs@tglx/
[agordeev@linux.ibm.com added Link tag]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
strtobool() is the same as kstrtobool().
However, the latter is more used within the kernel.
In order to remove strtobool() and slightly simplify kstrtox.h, switch to
the other function name.
While at it, include the corresponding header file (<linux/kstrtox.h>)
Link: https://lore.kernel.org/all/cover.1667336095.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
s390 allows to enable CONFIG_NUMA, mainly to enable a couple of system
calls which are only present if NUMA is enabled. The NUMA specific system
calls are required by a couple of applications, which wouldn't work if the
system calls wouldn't be present.
The NUMA implementation itself maps all CPUs and memory to node 0. A
special case is the generic percpu setup code, which doesn't expect an s390
like implementation and therefore emits a message/warning:
"percpu: cpu 0 has no node -1 or node-local memory".
In order to get rid of this message, and also to provide sane CPU to node
and CPU distance mappings implement a minimal setup_per_cpu_areas()
function, which is very close to the generic variant.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The generic vga.h contains a couple of defines, which do no harm on
s390. Therefore use the generic version and git rid of the s390
specific empty header file.
Suggested-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use generic shmparam.h header file since the contents are identical.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the generic bugs.h header file. Except for an
excellent comment the header files are identical.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
There is no serial driver on s390, especially none that relies on a
bogus BASE_BAUD define. Therefore use the generic header file.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Enable HUGETLB_PAGE_OPTIMIZE_VMEMMAP for s390.
With this, vmemmap pages used to back struct pages for compound tail
pages of hugetlb pages are freed and remapped to compound head page
frame as RO, see also Documentation/vm/vmemmap_dedup.rst.
For 1M hugetlb pages, this results in freeing 3 of 4 vmemmap pages,
saving 12K of memory for each 1M hugetlb page (~1.2%).
/sys/kernel/debug/kernel_page_tables will show the impact:
---[ vmemmap Area Start ]---
[...]
0x0000037202d84000-0x0000037202d85000 4K PTE RW NX
0x0000037202d85000-0x0000037202d88000 12K PTE RO NX
For 2G hugetlb pages, this results in freeing 8191 of 8192 vmemmap
pages, saving 32764K of memory for each 2G hugetlb page (~1.6%)
/sys/kernel/debug/kernel_page_tables will show the impact:
---[ vmemmap Area Start ]---
[...]
0x000003720a000000-0x000003720a001000 4K PTE RW NX
0x000003720a001000-0x000003720c000000 32764K PTE RO NX
The memory savings come with some costs:
- vmemmap mapping for compound hugetlb pages is not a PMD mapping any
more, but split to 4K PTE mappings, and it will not be coalesced back
to PMD mapping after freeing hugetlb pages from the pool.
Apart from theoretical performance impact, this will also (slightly)
relativize the memory savings because of additional 2K PTE pagetable
allocations.
- Workload using "on the fly" hugetlb allocations via
"nr_overcommit_hugepages" instead of using the hugetlb pool via
"nr_hugepages" will suffer from considerably increased fault handling
time, see also description from commit 78f39084b4
("mm: hugetlb_vmemmap: add hugetlb_optimize_vmemmap sysctl").
- Freeing hugetlb pages from the pool will require re-allocation of the
freed struct pages, and therefore needs some memory available to the
kernel. This might fail in memory constrained scenarios.
- For the same reason, memory offline might fail even for ZONE_MOVABLE
when hugetlb pages are present (but not for s390, since we do not
support ARCH_ENABLE_HUGEPAGE_MIGRATION, and therefore cannot have
hugetlb pages in ZONE_MOVABLE).
- General increased complexity and overhead in kernel handling of
compound (head) pages.
Therefore, this feature is disabled by default, and has to be enabled
explicitly either by adding "hugetlb_free_vmemmap=on" kernel parameter,
or during run-time via "/proc/sys/vm/hugetlb_optimize_vmemmap" sysctl.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rename structure member users to active_events to make it consistent
with PMU pai_ext. Also use the same prefix syntax for increment and
decrement operators in both PMUs.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Rework the mapped buffer reference count in PMU pai_crypto
to match the same technique as in PMU pai_ext.
This simplifies the logic.
Do not count the individual number of counter and sampling
processes. Remember the type of access and the total number of
references to the buffer.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move enum definition to header file. This is done in preparation
for a follow on patch where this enum will be used in another source
file.
Also change the enum name from paiext_mode to paievt_mode
to indicate this enum is now used for several events.
Make naming consistent and rename PAI_MODE_COUNTER to PAI_MODE_COUNTING.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Adjust white space according to coding guidelines.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Using z/VM the 3270 terminal emulator also emulates an IBM 3215 console
which outputs line by line. When the screen is full, the console enters
the MORE... state and waits for the operator to confirm the data
on the screen by pressing a clear key. If this does not happen in the
default time frame (currently 50 seconds) the console enters the HOLDING
state.
It then waits another time frame (currently 10 seconds) before the output
continues on the next screen. When the operator presses the clear key
during these wait times, the output continues immediately.
This may lead to a very long boot time when the console
has to print many messages, also the system may hang because of the
console's limited buffer space and the system waits for the console
output to drain and finally to finish. This problem can only occur
when a terminal emulator is actually connected to the 3215 console
driver. If not z/VM simply drops console output.
Remedy this rare situation and add a kernel boot command line parameter
con3215_drop. It can be set to 0 (do not drop) or 1 (do drop) which is
the default. This instructs the kernel drop console data when the
console buffer is full. This speeds up the boot time considerable and
also does not hang the system anymore.
Add a sysfs attribute file for console IBM 3215 named con_drop.
This allows for changing the behavior after the boot, for example when
during interactive debugging a panic/crash is expected.
Here is a test of the new behavior using the following test program:
#/bin/bash
declare -i cnt=4
mode=$(cat /sys/bus/ccw/drivers/3215/con_drop)
[ $mode = yes ] && cnt=25
echo "cons_drop $(cat /sys/bus/ccw/drivers/3215/con_drop)"
echo "vmcp term more 5 2"
vmcp term more 5 2
echo "Run $cnt iterations of "'echo t > /proc/sysrq-trigger'
for i in $(seq $cnt)
do
echo "$i. command 'echo t > /proc/sysrq-trigger' at $(date +%F,%T)"
echo t > /proc/sysrq-trigger
sleep 1
done
echo "droptest done" > /dev/kmsg
#
Output with sysfs attribute con_drop set to 1:
# ./droptest.sh
cons_drop yes
vmcp term more 5 2
Run 25 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:09
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:10
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:11
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:12
5. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:13
6. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:14
7. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:15
8. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:16
9. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:17
10. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:18
11. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:19
12. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:20
13. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:21
14. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:22
15. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:23
16. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:24
17. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:25
18. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:26
19. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:27
20. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:28
21. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:29
22. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:30
23. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:31
24. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:32
25. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:15:33
#
There are no hangs anymore.
Output with sysfs attribute con_drop set to 0 and identical
setting for z/VM console 'term more 5 2'. Sometimes hitting the
clear key at the x3270 console to progress output.
# ./droptest.sh
cons_drop no
vmcp term more 5 2
Run 4 iterations of echo t > /proc/sysrq-trigger
1. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:20:58
2. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:24:32
3. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:28:04
4. command 'echo t > /proc/sysrq-trigger' at 2022-09-02,10:31:37
#
Details:
Enable function raw3215_write() to handle tab expansion and newlines
and feed it with input not larger than the console buffer of 65536
bytes. Function raw3125_putchar() just forwards its character for
output to raw3215_write().
This moves tab to blank conversion to one function raw3215_write()
which also does call raw3215_make_room() to wait for enough free
buffer space.
Function handle_write() loops over all its input and segments input
into chunks of console buffer size (should the input be larger).
Rework tab expansion handling logic to avoid code duplication.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The functions con3215_write() and tty3215_write() have nearly
identical function bodies and a slightly different function prototype.
Create function handle_write() to handle the common function
body and maintain the function prototypes.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings
for very large and very sparse device topology
- Work around a relocation handling error when compiling
the nVHE object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock
for too long by limiting the walk to the largest
block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNT2hQUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNeVwgAkGGk2F2SF5s+MQUQ9tDPxyuRbddN
NPo/YRTKszKc8rK6d1TCbQi56I3e8Oa7kNkMF7CiBlAekB7B1r1ySg5qc+3lQebx
moME30Ru4nmfqPcZ7971MA8Me7zZxGzvIviL5KIwm1ownGifdTsPZ9jCvu4EPdzv
3dd10guH3GeBIq8QeQGEqNP4fticziwhE+IA3HZstcWsq96800Le7WNAgklfzdC+
YTB81QU6whHv6N/7YvRcTbp+tER3VIKdFMmRD1FwC90flhXMbxTymESFXULfHCM2
x/arGz2E31/QGgJo0/Yy2VPenr5ZMU57dL4SYWR02mwSfJQnJWb1cRdWnw==
=rxQ7
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
This reverts commit 72a9585972.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a9585972 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
-----BEGIN PGP SIGNATURE-----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=DXG7
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache allocation
on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration info
properly
- Drop a -mabi=ms compiler option check as both compilers support it now
anyway
- A couple of fixes to how the initial, statically allocated FPU buffer
state is setup and its interaction with dynamic states at runtime
-----BEGIN PGP SIGNATURE-----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=2hxy
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
-----BEGIN PGP SIGNATURE-----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=tTNe
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
- corsair-psu: Fix typo in USB id description, and add USB ID for new PSU
- pwm-fan: Fix fan power handling when disabling fan control
-----BEGIN PGP SIGNATURE-----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=ajp4
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
-----BEGIN PGP SIGNATURE-----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=osgb
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
