The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Clearly state that the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT and
V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls are required for
stateful codecs.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Stateful codecs must support the V4L2_CID_MIN_BUFFERS_FOR_OUTPUT
and V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controls. The vicodec driver
was missing support for these controls. Add them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
In ia_css_3a_statistics_allocate(), there is no check on the allocation
result of the rgby_data memory. If rgby_data is not successfully
allocated, it may trigger the assert(host_stats->rgby_data) assertion in
ia_css_s3a_hmem_decode(). Adding a check to fix this potential issue.
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241104145051.3088231-1-lihuafei1@huawei.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The check to see if err is non-zero is always false because err has
been previously checked on whenever err has been assigned in previous
code paths. The check is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241012141403.1558513-1-colin.i.king@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We have the respective SPDX identifiers that are already being applied
to the files in question. Remove the License information boilerplate.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240923105539.3569110-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Corrected typos:
componnet->component,
cofiguration->configuration,
doubtfull->doubtful,
consisit->consist,
coppied->copied.
These changes fix the typos in the comment,
without affecting the functionality.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Link: https://lore.kernel.org/r/20240923033032.2420839-1-yujiaoliang@vivo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix mt9m114_set_fmt() not setting format.format.code when called with
format.which == V4L2_SUBDEV_FORMAT_TRY.
This fixes atomisp failing to start streaming with the mt9m114 on
an Asus T100TA because of __media_pipeline_start() returning -EPIPE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241013154056.12532-5-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The input_lock was not being initialized, fix this.
Also switch to devm_kzalloc() for the main driver data struct, so that
devm_mutex_init() can be used for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241013154056.12532-4-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2_CID_3A_LOCK control is causing v4l2_ctrl_new_custom()
to fail with -ERANGE.
It would be better to fix this control but this entire driver is going to
be replaced with the drivers/media/i2c/mt9m114 standard v4l2 driver. This
quick fix gets things going for now until the driver is replaced.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241013154056.12532-3-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If atomisp fails to start the stream the buffers must be returned to
the VB2_BUF_STATE_QUEUED state before returning an error from
atomisp_start_streaming().
This fixes the following WARN_ON():
[ 250.313554] WARNING: CPU: 3 PID: 2178 at drivers/media/common/videobuf2/videobuf2-core.c:1801 vb2_start_streaming+0xcb/0x150 [videobuf2_common]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20241013154056.12532-2-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 3a81c7660f ("media: staging: atomisp: Remove IMX sensor
support") the libmsrlisthelper code is no longer used, remove it.
Suggested-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240916091512.81859-1-hdegoede@redhat.com
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Factor out common instance destruction code into
a common function.
Suggested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When destroying an inst we should make sure that we don't race
against threaded IRQ (or pending IRQ), otherwise we can concurrently
kfree() inst context and inst itself.
BUG: KASAN: slab-use-after-free in vb2_queue_error+0x80/0x90
Call trace:
dump_backtrace+0x1c4/0x1f8
show_stack+0x38/0x60
dump_stack_lvl+0x168/0x1f0
print_report+0x170/0x4c8
kasan_report+0x94/0xd0
__asan_report_load2_noabort+0x20/0x30
vb2_queue_error+0x80/0x90
venus_helper_vb2_queue_error+0x54/0x78
venc_event_notify+0xec/0x158
hfi_event_notify+0x878/0xd20
hfi_process_msg_packet+0x27c/0x4e0
venus_isr_thread+0x258/0x6e8
hfi_isr_thread+0x70/0x90
venus_isr_thread+0x34/0x50
irq_thread_fn+0x88/0x130
irq_thread+0x160/0x2c0
kthread+0x294/0x328
ret_from_fork+0x10/0x20
Allocated by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_alloc_info+0x28/0x38
__kasan_kmalloc+0x84/0xa0
kmalloc_trace+0x7c/0x98
v4l2_m2m_ctx_init+0x74/0x280
venc_open+0x444/0x6d0
v4l2_open+0x19c/0x2a0
chrdev_open+0x374/0x3f0
do_dentry_open+0x710/0x10a8
vfs_open+0x88/0xa8
path_openat+0x1e6c/0x2700
do_filp_open+0x1a4/0x2e0
do_sys_openat2+0xe8/0x508
do_sys_open+0x15c/0x1a0
__arm64_sys_openat+0xa8/0xc8
invoke_syscall+0xdc/0x270
el0_svc_common+0x1ec/0x250
do_el0_svc+0x54/0x70
el0_svc+0x50/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Freed by task 20291:
kasan_set_track+0x4c/0x80
kasan_save_free_info+0x3c/0x60
____kasan_slab_free+0x124/0x1a0
__kasan_slab_free+0x18/0x28
__kmem_cache_free+0x134/0x300
kfree+0xc8/0x1a8
v4l2_m2m_ctx_release+0x44/0x60
venc_close+0x78/0x130 [venus_enc]
v4l2_release+0x20c/0x2f8
__fput+0x328/0x7f0
____fput+0x2c/0x48
task_work_run+0x1e0/0x280
get_signal+0xfb8/0x1190
do_notify_resume+0x34c/0x16a8
el0_svc+0x9c/0xe8
el0t_64_sync_handler+0x48/0x120
el0t_64_sync+0x1a8/0x1b0
Rearrange inst destruction. First remove the inst from the
core->instances list, second synchronize IRQ/IRQ-thread to
make sure that nothing else would see the inst while we take
it down.
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
We destroy mutex-es too early as they are still taken in
v4l2_fh_exit()->v4l2_event_unsubscribe()->v4l2_ctrl_find().
We should destroy mutex-es right before kfree(). Also
do not vdec_ctrl_deinit() before v4l2_fh_exit().
Fixes: 7472c1c691 ("[media] media: venus: vdec: add video decoder files")
Suggested-by: Tomasz Figa <tfiga@google.com>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
HFI supports hierarchical P encoding and the ability to specify the
bitrate for the different layers.
Connect the controls that V4L2 provides and HFI supports.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Move the dynamic bitrate updating functionality to a separate function
so that it can be shared.
No functionality changes.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Use runtime PM autosuspend function to avoid rapid power state bouncing.
Signed-off-by: Zhi Mao <zhi.mao@mediatek.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Switch from s_stream() to enable_streams() and disable_streams() pad
operations. They are preferred and required for streams support.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Port the ov5645 sensor driver to use the subdev active state.
Move all the format configuration to the subdevice state and simplify
the format handling, locking and initialization.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Remove the `power_lock` mutex used during control applications, as it is
only utilized in the .s_ctrl() function. Since the control framework
already serializes calls to this function, the mutex is unnecessary.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Utilize the v4l2_async_register_subdev_sensor() helper to register the
sub-device, as this facilitates parsing of firmware interfaces for remote
references.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Refactor error handling in the ov5645_probe() function by replacing
multiple dev_err() calls with dev_err_probe().
- Note that during this process, the error string "external clock
frequency %u is not supported" was replaced with "unsupported xclk
frequency %u" to ensure it wraps at 80 columns.
- Additionally, the error string for control initialization failure was
changed from "%s: control initialization error %d\n" to "failed to add
controls\n" as there is no need to print the function name and error code
in the string, since dev_err_probe() already provides this information.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
While assigning the subdev device pointer, use the local `dev` pointer
which is already extracted from the `i2c_client` pointer.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The DMA unmap API is not supposed to return value. Thus this patch
changes the ipu6_mmu_unmap() as a void function and DMA unmapping
didn't check the return value.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
[Sakari Ailus: Drop unnecessary returns.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The MMU mapping flow is optimized for improve the performance, the
unmapping flow could also be optimized to follow same flow.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
ipu6_mmu_map() operated on a per-page basis, it leads frequent
spin_lock/unlock() and clflush_cache_range() for each page, it
will cause inefficiencies especially when handling dma-bufs
with large number of pages. However, the pages are likely concentrated
pages by IOMMU DMA driver, IPU MMU driver can map the concentrated
pages into less entries in l1 table.
This change enhances ipu6_mmu_map() with batching process multiple
contiguous pages. It significantly reduces calls for spin_lock/unlock
and clflush_cache_range() and improve the performance.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
l2_map() and l2_unmap() are better to be grouped together.
l2_unmap() will soon be called from l2_map() for mapping
optimization.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Jianhui Dai <jianhui.j.dai@intel.com>
[Sakari Ailus: Rebase on debug print fixes on 32-bit.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Rename the pad field in __media_pipeline_start() to both better describe
what it is and avoid masking it during the loop.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The buttress ipc ish structure is not effectively used on IPU6 - data
is nullified on init. Remove the ish structure and handing of related
interrupts to cleanup the code.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
When using buffers from DRM, DMA-API gives a warning about: "mapping sg
segment longer than device claims to support [len=307200] [max=65536]"
Add a call to vb2_dma_contig_set_max_seg_size() to tell the DMA-API
about the supported segment size (which is UINT_MAX).
Fixes: 6edb685abb ("media: raspberrypi: Add support for RP1-CFE")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Some IPU6 devices have shared interrupts. We need to handle properly
case when interrupt is triggered from other device on shared irq line
and IPU6 itself disabled. In such case we get 0xffffffff from
ISR_STATUS register and handle all irq's cases, for what we are not
not prepared and usually hang the whole system.
To avoid the issue use pm_runtime_get_if_active() to check if
the device is enabled and prevent suspending it when we handle irq
until the end of irq. Additionally use synchronize_irq() in suspend
Fixes: ab29a2478e ("media: intel/ipu6: add IPU6 buttress interface driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com> # ThinkPad X1 Yoga Gen 8, ov2740
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2X.. mbus formats are related to parallel interface and
as such should not be acceptable on the sink pad of the bridge.
Only keep their csi counterpart in 1X..
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add handling of pm_runtime in order to control the supplies
and clocks of the bridge.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add pad enable_streams and disable_streams ops in addition to
v4l2_subdev_s_stream_helper. Moreover, use functions
v4l2_subdev_enable_streams and v4l2_subdev_disable_streams to
control the source subdev.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Following addition of cascaded s_stream call within
mipid02_stream_enable and mipid02_stream_disable,
the mipid02_stream_enable error handling must be fixed to simply
disable the clocks & data lanes without also calling
again the s_stream of the source subdev.
Moreover, main control registers are reset to 0 for all cases
of error within the mipid02_stream_enable even if they haven't yet
been written. Correct this behavior by simply returning an
error when register clear are not necessary.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Introduce enable_streams and disable_streams pad ops and
replace s_stream with the v4l2_subdev_s_stream_helper
function.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add new structure 'mt9p031_model_info' to encapsulate format codes for
the mt9p031 camera sensor family. This approach enhances code clarity
and maintainability.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The ACPI version of this driver "just works" on dts based systems with a
few extensions to facilitate.
- Add support for DT based probing
- Add support for taking the part out of reset via a GPIO reset pin
- Add in regulator bulk on/off logic for the power rails.
Once done this sensor works nicely on a Qualcomm X1E80100 CRD.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
The data-sheet and documentation for this part uses the name xvclk not
ext_clk for the input reference clock. Rename the variables and defines in
this driver to align with the data-sheet name.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Add bindings for the already upstream OV08X40 to enable usage of this
sensor on DTS based systems.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
[Sakari Ailus: Add the file to MAINTAINERS.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is necessary to account for I2C quirks in the burst mode path of this
driver. Not all I2C controllers can accept arbitrarily long writes and this
is represented in the quirks field of the adapter structure.
Prior to this patch the following error message is seen on a Qualcomm
X1E80100 CRD.
[ 38.773524] i2c i2c-2: adapter quirk: msg too long (addr 0x0036, size 290, write)
[ 38.781454] ov08x40 2-0036: Failed regs transferred: -95
[ 38.787076] ov08x40 2-0036: ov08x40_start_streaming failed to set regs
Fix the error by breaking up the write sequence into the advertised maximum
write size of the quirks field if the quirks field is populated.
Fixes: 8f667d2023 ("media: ov08x40: Reduce start streaming time")
Cc: stable@vger.kernel.org # v6.9+
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
In set_frame_rate(), select a rate in rate_0 or rate_1 by checking
sd->frame_rate >= r->fps in a loop, but the loop condition terminates when
the index reaches zero, which fails to check the last elememt in rate_0 or
rate_1.
Check for >= 0 so that the last one in rate_0 or rate_1 is also checked.
Fixes: 189d92af70 ("V4L/DVB (13422): gspca - ov534: ov772x changes from Richard Kaswy.")
Cc: stable@vger.kernel.org
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org
Fixes: b50a64fc54 ("media: amphion: add amphion vpu device driver")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
It is not valid to call pm_runtime_set_suspended() and
pm_runtime_set_active() for devices with runtime PM enabled because it
returns -EAGAIN if it is enabled already and working. So, adjust the
order to fix it.
Cc: stable@vger.kernel.org
Fixes: 5f9a089b6d ("dw9768: Enable low-power probe on ACPI")
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
v4l2_subdev_init_finalize() already sets the HAS_EVENTS flag if a
control handler is set. Let's drop the HAS_EVENTS flag.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
v4l2_subdev_init_finalize() already sets the HAS_EVENTS flag if a
control handler is set, and subdev_do_ioctl() uses
v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe()
as defaults if the subdev doesn't have .(un)subscribe.
Let's drop the HAS_EVENTS flag and event handlers.
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
