Initialize local variables in teo_select() where they are declared.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename a local variable in teo_update() so that its purpose is better
reflected by its name and use one more local variable in the loop
over the CPU idle states in that function to make the code somewhat
easier to read.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because cpuidle assumes worst-case C-state parameters, PC6 parameters
are used for describing C6, which is worst-case for requesting CC6.
When PC6 is enabled, this is appropriate. But if PC6 is disabled
in the BIOS, the exit latency and target residency should be adjusted
accordingly.
Exit latency:
Previously the C6 exit latency was measured as the PC6 exit latency.
With PC6 disabled, the C6 exit latency should be the one of CC6.
Target residency:
With PC6 disabled, the idle duration within [CC6, PC6) would make the
idle governor choose C1E over C6. This would cause low energy-efficiency.
We should lower the bar to request C6 when PC6 is disabled.
To fill this gap, check if PC6 is disabled in the BIOS in the
MSR_PKG_CST_CONFIG_CONTROL(0xe2) register. If so, use the CC6 exit latency
for C6 and set target_residency to 3 times of the new exit latency. [This
is consistent with how intel_idle driver uses _CST to calculate the
target_residency.] As a result, the OS would be more likely to choose C6
over C1E when PC6 is disabled, which is reasonable, because if C6 is
enabled, it implies that the user cares about energy, so choosing C6 more
frequently makes sense.
The new CC6 exit latency of 92us was measured with wult[1] on SKX via NIC
wakeup as the 99.99th percentile. Also CLX and CPX both have the same CPU
model number as SkX, but their CC6 exit latencies are similar to the SKX
one, 96us and 89us respectively, so reuse the SKX value for them.
There is a concern that it might be better to use a more generic approach
instead of optimizing every platform. However, if the required code
complexity and different PC6 bit interpretation on different platforms
are taken into account, tuning the code per platform seems to be an
acceptable tradeoff.
Link: https://intel.github.io/wult/ # [1]
Suggested-by: Len Brown <len.brown@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Five small and fairly minor fixes, all in drivers.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYLzsbiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishRkoAQD07kLp
JSHpsn97DOdDpCYu+GoLtHz9uJ9Keh+61hbv+gEAoruwy+STPC3MiKP6IW4b1i/R
U66kS0NWYkGqOITA2Xs=
=Wqvj
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five small and fairly minor fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V
scsi: ufs: ufs-mediatek: Fix HCI version in some platforms
scsi: qedf: Do not put host in qedf_vport_create() unconditionally
scsi: lpfc: Fix failure to transmit ABTS on FC link
scsi: target: core: Fix warning on realtime kernels
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmC82AQACgkQ8vlZVpUN
gaOkAgf+KH57P/P0sB6aVBHpAzqa9jTKJWMA5kpCqYUDkYlfF7n2hwsjMzWpJ5MY
ZvFpKAflmRnve/ULUZQX6+zrcbieNs3e+6VFZrZ0PmxN0dupyISLY7jnvCRDleA7
BFO34AcH+QEst9zXJmgta9eoy3LA8sawhQ/d7ujVY+IRFk40m26fuAMiaGznlQJ5
dmrx7pHZWKFIDFIg2TdFlP+Voqbxs2VTT16gmWpGBdTyWYHKjbSOLKJFc9DwYeE9
aANf6iIzwXz7y9pZiOnTrGuKDEJcIZNESkbIqw62YgqsoObLbsbCZNmNcqxyHpYQ
Mh3L59KtmjANW3iOxQfyxkNTugxchw==
=BSnf
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
ext4: fix no-key deletion for encrypt+casefold
ext4: fix memory leak in ext4_fill_super
ext4: fix fast commit alignment issues
ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed
ext4: fix accessing uninit percpu counter variable with fast_commit
ext4: fix memory leak in ext4_mb_init_backend on error path.
A set of fixes that have been coming in over the last few weeks, the
usual mix of fixes:
- DT fixups for TI K3
- SATA drive detection fix for TI DRA7
- Power management fixes and a few build warning removals for OMAP
- OP-TEE fix to use standard API for UUID exporting
- DT fixes for a handful of i.MX boards
... plus a few other smaller items
-----BEGIN PGP SIGNATURE-----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=TbGI
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have been coming in over the last few weeks, the
usual mix of fixes:
- DT fixups for TI K3
- SATA drive detection fix for TI DRA7
- Power management fixes and a few build warning removals for OMAP
- OP-TEE fix to use standard API for UUID exporting
- DT fixes for a handful of i.MX boards
And a few other smaller items"
* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
arm64: meson: select COMMON_CLK
soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
optee: use export_uuid() to copy client UUID
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
...
Fix our KVM reverse map real-mode handling since we enabled huge vmalloc (in some
configurations).
Revert a recent change to our IOMMU code which broke some devices.
Fix KVM handling of FSCR on P7/P8, which could have possibly let a guest crash it's Qemu.
Fix kprobes validation of prefixed instructions across page boundary.
Thanks to: Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas, Frederic Barrat, Naveen
N. Rao, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=KkfQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix our KVM reverse map real-mode handling since we enabled huge
vmalloc (in some configurations).
Revert a recent change to our IOMMU code which broke some devices.
Fix KVM handling of FSCR on P7/P8, which could have possibly let a
guest crash it's Qemu.
Fix kprobes validation of prefixed instructions across page boundary.
Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas,
Frederic Barrat, Naveen N. Rao, and Nicholas Piggin"
* tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs"
KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
powerpc: Fix reverse map real-mode address lookup with huge vmalloc
powerpc/kprobes: Fix validation of prefixed instructions across page boundary
MSR_AMD64_SEV even though the spec clearly states so, and check CPUID
bits first.
- Send only one signal to a task when it is a SEGV_PKUERR si_code type.
- Do away with all the wankery of reserving X amount of memory in
the first megabyte to prevent BIOS corrupting it and simply and
unconditionally reserve the whole first megabyte.
- Make alternatives NOP optimization work at an arbitrary position
within the patched sequence because the compiler can put single-byte
NOPs for alignment anywhere in the sequence (32-bit retpoline), vs our
previous assumption that the NOPs are only appended.
- Force-disable ENQCMD[S] instructions support and remove update_pasid()
because of insufficient protection against FPU state modification in an
interrupt context, among other xstate horrors which are being addressed
at the moment. This one limits the fallout until proper enablement.
- Use cpu_feature_enabled() in the idxd driver so that it can be
build-time disabled through the defines in .../asm/disabled-features.h.
- Fix LVT thermal setup for SMI delivery mode by making sure the APIC
LVT value is read before APIC initialization so that softlockups during
boot do not happen at least on one machine.
- Mark all legacy interrupts as legacy vectors when the IO-APIC is
disabled and when all legacy interrupts are routed through the PIC.
-----BEGIN PGP SIGNATURE-----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=zRI1
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A bunch of x86/urgent stuff accumulated for the last two weeks so
lemme unload it to you.
It should be all totally risk-free, of course. :-)
- Fix out-of-spec hardware (1st gen Hygon) which does not implement
MSR_AMD64_SEV even though the spec clearly states so, and check
CPUID bits first.
- Send only one signal to a task when it is a SEGV_PKUERR si_code
type.
- Do away with all the wankery of reserving X amount of memory in the
first megabyte to prevent BIOS corrupting it and simply and
unconditionally reserve the whole first megabyte.
- Make alternatives NOP optimization work at an arbitrary position
within the patched sequence because the compiler can put
single-byte NOPs for alignment anywhere in the sequence (32-bit
retpoline), vs our previous assumption that the NOPs are only
appended.
- Force-disable ENQCMD[S] instructions support and remove
update_pasid() because of insufficient protection against FPU state
modification in an interrupt context, among other xstate horrors
which are being addressed at the moment. This one limits the
fallout until proper enablement.
- Use cpu_feature_enabled() in the idxd driver so that it can be
build-time disabled through the defines in disabled-features.h.
- Fix LVT thermal setup for SMI delivery mode by making sure the APIC
LVT value is read before APIC initialization so that softlockups
during boot do not happen at least on one machine.
- Mark all legacy interrupts as legacy vectors when the IO-APIC is
disabled and when all legacy interrupts are routed through the PIC"
* tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Check SME/SEV support in CPUID first
x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR
x86/setup: Always reserve the first 1M of RAM
x86/alternative: Optimize single-byte NOPs at an arbitrary position
x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid()
dmaengine: idxd: Use cpu_feature_enabled()
x86/thermal: Fix LVT thermal setup for SMI delivery mode
x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing
commit 471fbbea7f ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.
This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:
W : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key
Repro steps in kvm-xfstests test appliance:
mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
mount /vdc
mkdir /vdc/dir
chattr +F /vdc/dir
keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
xfs_io -c "set_encpolicy $keyid" /vdc/dir
for i in `seq 1 100`; do
mkdir /vdc/dir/$i
done
xfs_io -c "rm_enckey $keyid" /vdc
rm -rf /vdc/dir # fails with the bug
Fixes: 471fbbea7f ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.
If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.
This can easily be reproduced by calling an infinite loop of:
systemctl start <ext4_on_lvm>.mount, and
systemctl stop <ext4_on_lvm>.mount
... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.
Fixes: ce40733ce9 ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec11 ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.com
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.
Cc: stable@kernel.org
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975] ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368] ext4_find_extent+0x300/0x330 [ext4]
[130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995] ext4_readpage+0x54/0x100 [ext4]
[130747.337359] generic_file_buffered_read+0x410/0xae8
[130747.337767] generic_file_read_iter+0x114/0x190
[130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556] __vfs_read+0x11c/0x188
[130747.338851] vfs_read+0x94/0x150
[130747.339110] ksys_read+0x74/0xf0
This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable). Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."
Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull i2c fixes from Wolfram Sang:
"Some more bugfixes from I2C for v5.13. Usual stuff"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
i2c: qcom-geni: Add shutdown callback for i2c
i2c: tegra-bpmp: Demote kernel-doc abuses
i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers
These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
as camera sensor boards are variable.
-----BEGIN PGP SIGNATURE-----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=veTm
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes
Devicetree fixes for TI K3 platforms for v5.13 merge window:
These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
as camera sensor boards are variable.
* tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
arm64: dts: ti: k3-*: Rename the TI-SCI node
arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node
arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node
arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name
arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent
arm64: dts: ti: k3-am654-base-board: remove ov5640
Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituary
Signed-off-by: Olof Johansson <olof@lixom.net>
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
-----BEGIN PGP SIGNATURE-----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=/LY8
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
PM and build warning fixes for omaps
While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:
- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded
Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.
These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.
* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
bus: ti-sysc: Fix am335x resume hang for usb otg module
ARM: OMAP2+: Fix build warning when mmc_omap is not built
ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
ARM: OMAP1: Fix use of possibly uninitialized irq variable
Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The SATA quirk flags are no missing With recent removal of legacy
platform data and we need to add the quirk flags to detect drives.
-----BEGIN PGP SIGNATURE-----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=Ssh+
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Regression fix for TI dra7 SATA not detecting drives
The SATA quirk flags are no missing With recent removal of legacy
platform data and we need to add the quirk flags to detect drives.
* tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Fix missing quirk flags for sata
Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmCu8p4UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7k+Qf9Ek/atJBjaaVzhbGFQ8HRnDOk4U5J
dR0GbXKSN1zXjDLSBOBRyNcVn2T6lp4LwwYoleC2qG6MNoe6+y7fk1oRdvjkGjRO
ZYfZT/JJl187IN6JsxR8VhRmmcI5/C3bihMbpKoLdHcPGbwC4relfSy99Io94Xfk
CVn3PTxBA4KfoDq/+EiA9HkQ/HwQh/y7KD5yVd6OtLkt9awT1hYW1ttVefp95nAK
5+zTm0Z14U8aGm+wo8jywvSyeXiuMeWDUrweo05XcaHWfcv3T0Wni7tgS2pluxqa
lCMsNQBsZDTk6fUWxqPjjAEl6ks8N1H9L7YIGpq1dOCSYFUqI3jCmkhrFQ==
=5vQk
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.13:
- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch
Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Merge misc fixes from Andrew Morton:
"13 patches.
Subsystems affected by this patch series: mips, mm (kfence, debug,
pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc,
lib, ocfs2, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: use private address for Michel Lespinasse
ocfs2: fix data corruption by fallocate
lib: crc64: fix kernel-doc warning
mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY
mm/kasan/init.c: fix doc warning
proc: add .gitignore for proc-subset-pid selftest
hugetlb: pass head page to remove_hugetlb_page()
drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
mm/page_alloc: fix counting of free pages after take off from buddy
mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests()
pid: take a reference when initializing `cad_pid`
kfence: use TASK_IDLE when awaiting allocation
Revert "MIPS: make userspace mapping young by default"
* Build with '-mno-relax' when using LLVM's linker, which doesn't
support linker relaxation.
* A fix to build without SiFive's errata.
* A fix to use PAs during init_resources()
* A fix to avoid W+X mappings during boot.
-----BEGIN PGP SIGNATURE-----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=vuVu
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Build with '-mno-relax' when using LLVM's linker, which doesn't
support linker relaxation.
- A fix to build without SiFive's errata.
- A fix to use PAs during init_resources()
- A fix to avoid W+X mappings during boot.
* tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix memblock_free() usages in init_resources()
riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled
riscv: mm: Fix W+X mappings at boot
riscv: Use -mno-relax when using lld linker
When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped. That will cause file corruption. Fix this by
zero out eof blocks when extending the inode size.
Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.
qemu-img convert -p -t none -T none -f qcow2 $qcow_image \
-O qcow2 -o compat=1.1 $qcow_image.conv
The usage of fallocate in qemu is like this, it first punches holes out
of inode size, then extend the inode size.
fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0
fallocate(11, 0, 2276196352, 65536) = 0
v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html
v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/
Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix W=1 kernel build warning:
lib/crc64.c:40: warning:
bad line: or the previous crc64 value if computing incrementally.
Link: https://lkml.kernel.org/r/20210601135851.15444-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Coly Li <colyli@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The userfaultfd hugetlb tests cause a resv_huge_pages underflow. This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache. When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.
To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.
There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages. That is fixed in a more complicated
patch not targeted for -stable.
Test:
Hacked the code locally such that resv_huge_pages underflows produce a
warning, then:
./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
./tools/testing/selftests/vm/userfaultfd hugetlb 10
2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
Both tests succeed and produce no warnings. After the test runs number
of free/resv hugepages is correct.
[mike.kravetz@oracle.com: changelog fixes]
Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com
Fixes: 8fb5debc5f ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix gcc W=1 warning:
mm/kasan/init.c:228: warning: Function parameter or member 'shadow_start' not described in 'kasan_populate_early_shadow'
mm/kasan/init.c:228: warning: Function parameter or member 'shadow_end' not described in 'kasan_populate_early_shadow'
Link: https://lkml.kernel.org/r/20210603140700.3045298-1-yukuai3@huawei.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This new selftest needs an entry in the .gitignore file otherwise git
will try to track the binary.
Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com
Fixes: 268af17ada ("selftests: proc: test subset=pid")
Signed-off-by: David Matlack <dmatlack@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When memory_failure() or soft_offline_page() is called on a tail page of
some hugetlb page, "BUG: unable to handle page fault" error can be
triggered.
remove_hugetlb_page() dereferences page->lru, so it's assumed that the
page points to a head page, but one of the caller,
dissolve_free_huge_page(), provides remove_hugetlb_page() with 'page'
which could be a tail page. So pass 'head' to it, instead.
Link: https://lkml.kernel.org/r/20210526235257.2769473-1-nao.horiguchi@gmail.com
Fixes: 6eb4e88a6d ("hugetlb: create remove_hugetlb_page() to separate functionality")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
offline_pages() properly checks for memory holes and bails out.
However, we do a page_zone(pfn_to_page(start_pfn)) before calling
offline_pages() when offlining a memory block.
We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on
aarch64 in offlining code, otherwise we can trigger a BUG when hitting a
memory hole:
kernel BUG at include/linux/mm.h:1383!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class
CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4
Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : memory_subsys_offline+0x1f8/0x250
lr : memory_subsys_offline+0x1f8/0x250
Call trace:
memory_subsys_offline+0x1f8/0x250
device_offline+0x154/0x1d8
online_store+0xa4/0x118
dev_attr_store+0x44/0x78
sysfs_kf_write+0xe8/0x138
kernfs_fop_write_iter+0x26c/0x3d0
new_sync_write+0x2bc/0x4f8
vfs_write+0x718/0xc88
ksys_write+0xf8/0x1e0
__arm64_sys_write+0x74/0xa8
invoke_syscall.constprop.0+0x78/0x1e8
do_el0_svc+0xe4/0x298
el0_svc+0x20/0x30
el0_sync_handler+0xb0/0xb8
el0_sync+0x178/0x180
Kernel panic - not syncing: Oops - BUG: Fatal exception
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x00000251,20000846
Memory Limit: none
If nr_vmemmap_pages is set, we know that we are dealing with hotplugged
memory that doesn't have any holes. So call
page_zone(pfn_to_page(start_pfn)) only when really necessary -- when
nr_vmemmap_pages is set and we actually adjust the present pages.
Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com
Fixes: a08a2ae346 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai (QUIC) <quic_qiancai@quicinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently we found that there is a lot MemFree left in /proc/meminfo
after do a lot of pages soft offline, it's not quite correct.
Before Oscar's rework of soft offline for free pages [1], if we soft
offline free pages, these pages are left in buddy with HWPoison flag,
and NR_FREE_PAGES is not updated immediately. So the difference between
NR_FREE_PAGES and real number of available free pages is also even big
at the beginning.
However, with the workload running, when we catch HWPoison page in any
alloc functions subsequently, we will remove it from buddy, meanwhile
update the NR_FREE_PAGES and try again, so the NR_FREE_PAGES will get
more and more closer to the real number of available free pages.
(regardless of unpoison_memory())
Now, for offline free pages, after a successful call
take_page_off_buddy(), the page is no longer belong to buddy allocator,
and will not be used any more, but we missed accounting NR_FREE_PAGES in
this situation, and there is no chance to be updated later.
Do update in take_page_off_buddy() like rmqueue() does, but avoid double
counting if some one already set_migratetype_isolate() on the page.
[1]: commit 06be6ff3d2 ("mm,hwpoison: rework soft offline for free pages")
Link: https://lkml.kernel.org/r/20210526075247.11130-1-dinghui@sangfor.com.cn
Fixes: 06be6ff3d2 ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In pmd/pud_advanced_tests(), the vaddr is aligned up to the next pmd/pud
entry, and so it does not match the given pmdp/pudp and (aligned down)
pfn any more.
For s390, this results in memory corruption, because the IDTE
instruction used e.g. in xxx_get_and_clear() will take the vaddr for
some calculations, in combination with the given pmdp. It will then end
up with a wrong table origin, ending on ...ff8, and some of those
wrongly set low-order bits will also select a wrong pagetable level for
the index addition. IDTE could therefore invalidate (or 0x20) something
outside of the page tables, depending on the wrongly picked index, which
in turn depends on the random vaddr.
As result, we sometimes see "BUG task_struct (Not tainted): Padding
overwritten" on s390, where one 0x5a padding value got overwritten with
0x7a.
Fix this by aligning down, similar to how the pmd/pud_aligned pfns are
calculated.
Link: https://lkml.kernel.org/r/20210525130043.186290-2-gerald.schaefer@linux.ibm.com
Fixes: a5c3b9ffb0 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: <stable@vger.kernel.org> [5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid. Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid(). As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early. As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g. when delivering signals).
This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099e4 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.
Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.
Full KASAN splat below.
==================================================================
BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273
CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
ns_of_pid include/linux/pid.h:153 [inline]
task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
do_notify_parent+0x308/0xe60 kernel/signal.c:1950
exit_notify kernel/exit.c:682 [inline]
do_exit+0x2334/0x2bd0 kernel/exit.c:845
do_group_exit+0x108/0x2c8 kernel/exit.c:922
get_signal+0x4e4/0x2a88 kernel/signal.c:2781
do_signal arch/arm64/kernel/signal.c:882 [inline]
do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936
work_pending+0xc/0x2dc
Allocated by task 0:
slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516
slab_alloc_node mm/slub.c:2907 [inline]
slab_alloc mm/slub.c:2915 [inline]
kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920
alloc_pid+0xdc/0xc00 kernel/pid.c:180
copy_process+0x2794/0x5e18 kernel/fork.c:2129
kernel_clone+0x194/0x13c8 kernel/fork.c:2500
kernel_thread+0xd4/0x110 kernel/fork.c:2552
rest_init+0x44/0x4a0 init/main.c:687
arch_call_rest_init+0x1c/0x28
start_kernel+0x520/0x554 init/main.c:1064
0x0
Freed by task 270:
slab_free_hook mm/slub.c:1562 [inline]
slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600
slab_free mm/slub.c:3161 [inline]
kmem_cache_free+0x224/0x8e0 mm/slub.c:3177
put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114
put_pid+0x30/0x48 kernel/pid.c:109
proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401
proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591
proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617
call_write_iter include/linux/fs.h:1977 [inline]
new_sync_write+0x3ac/0x510 fs/read_write.c:518
vfs_write fs/read_write.c:605 [inline]
vfs_write+0x9c4/0x1018 fs/read_write.c:585
ksys_write+0x124/0x240 fs/read_write.c:658
__do_sys_write fs/read_write.c:670 [inline]
__se_sys_write fs/read_write.c:667 [inline]
__arm64_sys_write+0x78/0xb0 fs/read_write.c:667
__invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
invoke_syscall arch/arm64/kernel/syscall.c:49 [inline]
el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129
do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168
el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416
el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432
el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701
The buggy address belongs to the object at ffff23794dda0000
which belongs to the cache pid of size 224
The buggy address is located 4 bytes inside of
224-byte region [ffff23794dda0000, ffff23794dda00e0)
The buggy address belongs to the page:
page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0
head:(____ptrval____) order:1 compound_mapcount:0
flags: 0x3fffc0000010200(slab|head)
raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080
raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
==================================================================
Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com
Fixes: 9ec52099e4 ("[PATCH] replace cad_pid by a struct pid")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since wait_event() uses TASK_UNINTERRUPTIBLE by default, waiting for an
allocation counts towards load. However, for KFENCE, this does not make
any sense, since there is no busy work we're awaiting.
Instead, use TASK_IDLE via wait_event_idle() to not count towards load.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1185565
Link: https://lkml.kernel.org/r/20210521083209.3740269-1-elver@google.com
Fixes: 407f1d8c1b ("kfence: await for allocation using wait_event")
Signed-off-by: Marco Elver <elver@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org> [5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit f685a533a7.
The MIPS cache flush logic needs to know whether the mapping was already
established to decide how to flush caches. This is done by checking the
valid bit in the PTE. The commit above breaks this logic by setting the
valid in the PTE in new mappings, which causes kernel crashes.
Link: https://lkml.kernel.org/r/20210526094335.92948-1-tsbogend@alpha.franken.de
Fixes: f685a533a7 ("MIPS: make userspace mapping young by default")
Reported-by: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huang Pei <huangpei@loongson.cn>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
netfilter and wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime
power management
Previous releases - regressions:
- ice: - track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered
by generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining peers,
fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sNP5
-----END PGP SIGNATURE-----
Merge tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless, netfilter and
wireguard trees.
The bpf vs lockdown+audit fix is the most notable.
Things haven't slowed down just yet, both in terms of regressions in
current release and largish fixes for older code, but we usually see a
slowdown only after -rc5.
Current release - regressions:
- virtio-net: fix page faults and crashes when XDP is enabled
- mlx5e: fix HW timestamping with CQE compression, and make sure they
are only allowed to coexist with capable devices
- stmmac:
- fix kernel panic due to NULL pointer dereference of
mdio_bus_data
- fix double clk unprepare when no PHY device is connected
Current release - new code bugs:
- mt76: a few fixes for the recent MT7921 devices and runtime power
management
Previous releases - regressions:
- ice:
- track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
- fix allowing VF to request more/less queues via virtchnl
- correct supported and advertised autoneg by using PHY
capabilities
- allow all LLDP packets from PF to Tx
- kbuild: quote OBJCOPY var to avoid a pahole call break the build
Previous releases - always broken:
- bpf, lockdown, audit: fix buggy SELinux lockdown permission checks
- mt76: address the recent FragAttack vulnerabilities not covered by
generic fixes
- ipv6: fix KASAN: slab-out-of-bounds Read in
fib6_nh_flush_exceptions
- Bluetooth:
- fix the erroneous flush_work() order, to avoid double free
- use correct lock to prevent UAF of hdev object
- nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
connect
- ieee802154: multiple fixes to error checking and return values
- igb: fix XDP with PTP enabled
- intel: add correct exception tracing for XDP
- tls: fix use-after-free when TLS offload device goes down and back
up
- ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
- netfilter: nft_ct: skip expectations for confirmed conntrack
- mptcp: fix falling back to TCP in presence of out of order packets
early in connection lifetime
- wireguard: switch from O(n) to a O(1) algorithm for maintaining
peers, fixing stalls and a large memory leak in the process
Misc:
- devlink: correct VIRTUAL port to not have phys_port attributes
- Bluetooth: fix VIRTIO_ID_BT assigned number
- net: return the correct errno code ENOBUF -> ENOMEM
- wireguard:
- peer: allocate in kmem_cache saving 25% on peer memory
- do not use -O3"
* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
cxgb4: avoid link re-train during TC-MQPRIO configuration
sch_htb: fix refcount leak in htb_parent_to_leaf_offload
wireguard: allowedips: free empty intermediate nodes when removing single node
wireguard: allowedips: allocate nodes in kmem_cache
wireguard: allowedips: remove nodes in O(1)
wireguard: allowedips: initialize list head in selftest
wireguard: peer: allocate in kmem_cache
wireguard: use synchronize_net rather than synchronize_rcu
wireguard: do not use -O3
wireguard: selftests: make sure rp_filter is disabled on vethc
wireguard: selftests: remove old conntrack kconfig value
virtchnl: Add missing padding to virtchnl_proto_hdrs
ice: Allow all LLDP packets from PF to Tx
ice: report supported and advertised autoneg using PHY capabilities
ice: handle the VF VSI rebuild failure
ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
ice: Fix allowing VF to request more/less queues via virtchnl
virtio-net: fix for skb_over_panic inside big mode
ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
fib: Return the correct errno code
...
- Fix NULL pointer dereference in 'perf probe' when handling
DW_AT_const_value when looking for a variable, which is valid.
- Fix for capability querying of perf_event_attr.cgroup support in older
kernels.
- Add missing cloning of evsel->use_config_name.
- Honor event config name on --no-merge in 'perf stat'.
- Fix some memory leaks found using ASAN.
- Fix the perf entry for perf_event_attr setup with make LIBPFM4=1 on
s390 z/VM.
- Update MIPS UAPI perf_regs.h file.
- Fix 'perf stat' BPF counter load return check.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYLqEvgAKCRCyPKLppCJ+
J8nOAPwNmtXNGu2a/aV23go751d6s69oiEjhA9tmJfKrVnLdOwEA5r9MviUjml1+
li7TGcNo74dNaXgcuaZ9Oi854xEbvA4=
=8qmn
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.13-2021-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix NULL pointer dereference in 'perf probe' when handling
DW_AT_const_value when looking for a variable, which is valid.
- Fix for capability querying of perf_event_attr.cgroup support in
older kernels.
- Add missing cloning of evsel->use_config_name.
- Honor event config name on --no-merge in 'perf stat'.
- Fix some memory leaks found using ASAN.
- Fix the perf entry for perf_event_attr setup with make LIBPFM4=1 on
s390 z/VM.
- Update MIPS UAPI perf_regs.h file.
- Fix 'perf stat' BPF counter load return check.
* tag 'perf-tools-fixes-for-v5.13-2021-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf env: Fix memory leak of bpf_prog_info_linear member
perf symbol-elf: Fix memory leak by freeing sdt_note.args
perf stat: Honor event config name on --no-merge
perf evsel: Add missing cloning of evsel->use_config_name
perf test: Test 17 fails with make LIBPFM4=1 on s390 z/VM
perf stat: Fix error return code in bperf__load()
perf record: Move probing cgroup sampling support
perf probe: Fix NULL pointer dereference in convert_variable_location()
perf tools: Copy uapi/asm/perf_regs.h from the kernel for MIPS
-----BEGIN PGP SIGNATURE-----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=exOH
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix MSIs for platforms with "msi-map" device-tree property, which we
broke in v5.13-rc1 (Jean-Philippe Brucker)
- Add Krzysztof Wilczyński as PCI reviewer (Lorenzo Pieralisi)
* tag 'pci-v5.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/MSI: Fix MSIs for generic hosts that use device-tree's "msi-map"
MAINTAINERS: Add Krzysztof as PCI host/endpoint controllers reviewer
When configuring TC-MQPRIO offload, only turn off netdev carrier and
don't bring physical link down in hardware. Otherwise, when the
physical link is brought up again after configuration, it gets
re-trained and stalls ongoing traffic.
Also, when firmware is no longer accessible or crashed, avoid sending
FLOWC and waiting for reply that will never come.
Fix following hung_task_timeout_secs trace seen in these cases.
INFO: task tc:20807 blocked for more than 122 seconds.
Tainted: G S 5.13.0-rc3+ #122
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000
Call Trace:
__schedule+0x27b/0x6a0
schedule+0x37/0xa0
schedule_preempt_disabled+0x5/0x10
__mutex_lock.isra.14+0x2a0/0x4a0
? netlink_lookup+0x120/0x1a0
? rtnl_fill_ifinfo+0x10f0/0x10f0
__netlink_dump_start+0x70/0x250
rtnetlink_rcv_msg+0x28b/0x380
? rtnl_fill_ifinfo+0x10f0/0x10f0
? rtnl_calcit.isra.42+0x120/0x120
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x1a0/0x280
netlink_sendmsg+0x216/0x440
sock_sendmsg+0x56/0x60
__sys_sendto+0xe9/0x150
? handle_mm_fault+0x6d/0x1b0
? do_user_addr_fault+0x1c5/0x620
__x64_sys_sendto+0x1f/0x30
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7f73218321
RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321
RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003
RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6
R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0
Fixes: b1396c2bd6 ("cxgb4: parse and configure TC-MQPRIO offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit ae81feb733 ("sch_htb: fix null pointer dereference
on a null new_q") fixes a NULL pointer dereference bug, but it
is not correct.
Because htb_graft_helper properly handles the case when new_q
is NULL, and after the previous patch by skipping this call
which creates an inconsistency : dev_queue->qdisc will still
point to the old qdisc, but cl->parent->leaf.q will point to
the new one (which will be noop_qdisc, because new_q was NULL).
The code is based on an assumption that these two pointers are
the same, so it can lead to refcount leaks.
The correct fix is to add a NULL pointer check to protect
qdisc_refcount_inc inside htb_parent_to_leaf_offload.
Fixes: ae81feb733 ("sch_htb: fix null pointer dereference on a null new_q")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Suggested-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-04
This series contains updates to virtchnl header file and ice driver.
Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.
Haiyue handles error of rebuilding VF VSI during reset.
Paul fixes reporting of autoneg to use the PHY capabilities.
Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.
Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason A. Donenfeld says:
====================
wireguard fixes for 5.13-rc5
Here are bug fixes to WireGuard for 5.13-rc5:
1-2,6) These are small, trivial tweaks to our test harness.
3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so
much different with -O2 either.
4) We were accidentally calling synchronize_rcu instead of
synchronize_net while holding the rtnl_lock, resulting in some rather
large stalls that hit production machines.
5) Peer allocation was wasting literally hundreds of megabytes on real
world deployments, due to oddly sized large objects not fitting
nicely into a kmalloc slab.
7-9) We move from an insanely expensive O(n) algorithm to a fast O(1)
algorithm, and cleanup a massive memory leak in the process, in
which allowed ips churn would leave danging nodes hanging around
without cleanup until the interface was removed. The O(1) algorithm
eliminates packet stalls and high latency issues, in addition to
bringing operations that took as much as 10 minutes down to less
than a second.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing single nodes, it's possible that that node's parent is an
empty intermediate node, in which case, it too should be removed.
Otherwise the trie fills up and never is fully emptied, leading to
gradual memory leaks over time for tries that are modified often. There
was originally code to do this, but was removed during refactoring in
2016 and never reworked. Now that we have proper parent pointers from
the previous commits, we can implement this properly.
In order to reduce branching and expensive comparisons, we want to keep
the double pointer for parent assignment (which lets us easily chain up
to the root), but we still need to actually get the parent's base
address. So encode the bit number into the last two bits of the pointer,
and pack and unpack it as needed. This is a little bit clumsy but is the
fastest and less memory wasteful of the compromises. Note that we align
the root struct here to a minimum of 4, because it's embedded into a
larger struct, and we're relying on having the bottom two bits for our
flag, which would only be 16-bit aligned on m68k.
The existing macro-based helpers were a bit unwieldy for adding the bit
packing to, so this commit replaces them with safer and clearer ordinary
functions.
We add a test to the randomized/fuzzer part of the selftests, to free
the randomized tries by-peer, refuzz it, and repeat, until it's supposed
to be empty, and then then see if that actually resulted in the whole
thing being emptied. That combined with kmemcheck should hopefully make
sure this commit is doing what it should. Along the way this resulted in
various other cleanups of the tests and fixes for recent graphviz.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous commit moved from O(n) to O(1) for removal, but in the
process introduced an additional pointer member to a struct that
increased the size from 60 to 68 bytes, putting nodes in the 128-byte
slab. With deployed systems having as many as 2 million nodes, this
represents a significant doubling in memory usage (128 MiB -> 256 MiB).
Fix this by using our own kmem_cache, that's sized exactly right. This
also makes wireguard's memory usage more transparent in tools like
slabtop and /proc/slabinfo.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, deleting peers would require traversing the entire trie in
order to rebalance nodes and safely free them. This meant that removing
1000 peers from a trie with a half million nodes would take an extremely
long time, during which we're holding the rtnl lock. Large-scale users
were reporting 200ms latencies added to the networking stack as a whole
every time their userspace software would queue up significant removals.
That's a serious situation.
This commit fixes that by maintaining a double pointer to the parent's
bit pointer for each node, and then using the already existing node list
belonging to each peer to go directly to the node, fix up its pointers,
and free it with RCU. This means removal is O(1) instead of O(n), and we
don't use gobs of stack.
The removal algorithm has the same downside as the code that it fixes:
it won't collapse needlessly long runs of fillers. We can enhance that
in the future if it ever becomes a problem. This commit documents that
limitation with a TODO comment in code, a small but meaningful
improvement over the prior situation.
Currently the biggest flaw, which the next commit addresses, is that
because this increases the node size on 64-bit machines from 60 bytes to
68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up
using twice as much memory per node, because of power-of-two
allocations, which is a big bummer. We'll need to figure something out
there.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The randomized trie tests weren't initializing the dummy peer list head,
resulting in a NULL pointer dereference when used. Fix this by
initializing it in the randomized trie test, just like we do for the
static unit test.
While we're at it, all of the other strings like this have the word
"self-test", so add it to the missing place here.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With deployments having upwards of 600k peers now, this somewhat heavy
structure could benefit from more fine-grained allocations.
Specifically, instead of using a 2048-byte slab for a 1544-byte object,
we can now use 1544-byte objects directly, thus saving almost 25%
per-peer, or with 600k peers, that's a savings of 303 MiB. This also
makes wireguard's memory usage more transparent in tools like slabtop
and /proc/slabinfo.
Fixes: 8b5553ace8 ("wireguard: queueing: get rid of per-peer ring buffers")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many of the synchronization points are sometimes called under the rtnl
lock, which means we should use synchronize_net rather than
synchronize_rcu. Under the hood, this expands to using the expedited
flavor of function in the event that rtnl is held, in order to not stall
other concurrent changes.
This fixes some very, very long delays when removing multiple peers at
once, which would cause some operations to take several minutes.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
