Commit Graph

98 Commits

Author SHA1 Message Date
Sean Christopherson
e83bc09caf KVM: x86: Get active PCID only when writing a CR3 value
Retrieve the active PCID only when writing a guest CR3 value, i.e. don't
get the PCID when using EPT or NPT.  The PCID is especially problematic
for EPT as the bits have different meaning, and so the PCID and must be
manually stripped, which is annoying and unnecessary.  And on VMX,
getting the active PCID also involves reading the guest's CR3 and
CR4.PCIDE, i.e. may add pointless VMREADs.

Opportunistically rename the pgd/pgd_level params to root_hpa and
root_level to better reflect their new roles.  Keep the function names,
as "load the guest PGD" is still accurate/correct.

Last, and probably least, pass root_hpa as a hpa_t/u64 instead of an
unsigned long.  The EPTP holds a 64-bit value, even in 32-bit mode, so
in theory EPT could support HIGHMEM for 32-bit KVM.  Never mind that
doing so would require changing the MMU page allocators and reworking
the MMU to use kmap().

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305183123.3978098-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 04:43:56 -04:00
Sean Christopherson
5fc3424f8b KVM: x86/mmu: Make Host-writable and MMU-writable bit locations dynamic
Make the location of the HOST_WRITABLE and MMU_WRITABLE configurable for
a given KVM instance.  This will allow EPT to use high available bits,
which in turn will free up bit 11 for a constant MMU_PRESENT bit.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-19-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 04:43:49 -04:00
Sean Christopherson
e7b7bdea77 KVM: x86/mmu: Move logic for setting SPTE masks for EPT into the MMU proper
Let the MMU deal with the SPTE masks to avoid splitting the logic and
knowledge across the MMU and VMX.

The SPTE masks that are used for EPT are very, very tightly coupled to
the MMU implementation.  The use of available bits, the existence of A/D
types, the fact that shadow_x_mask even exists, and so on and so forth
are all baked into the MMU implementation.  Cross referencing the params
to the masks is also a nightmare, as pretty much every param is a u64.

A future patch will make the location of the MMU_WRITABLE and
HOST_WRITABLE bits MMU specific, to free up bit 11 for a MMU_PRESENT bit.
Doing that change with the current kvm_mmu_set_mask_ptes() would be an
absolute mess.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 04:43:48 -04:00
Sean Christopherson
8120337a4c KVM: x86/mmu: Stop using software available bits to denote MMIO SPTEs
Stop tagging MMIO SPTEs with specific available bits and instead detect
MMIO SPTEs by checking for their unique SPTE value.  The value is
guaranteed to be unique on shadow paging and NPT as setting reserved
physical address bits on any other type of SPTE would consistute a KVM
bug.  Ditto for EPT, as creating a WX non-MMIO would also be a bug.

Note, this approach is also future-compatibile with TDX, which will need
to reflect MMIO EPT violations as #VEs into the guest.  To create an EPT
violation instead of a misconfig, TDX EPTs will need to have RWX=0,  But,
MMIO SPTEs will also be the only case where KVM clears SUPPRESS_VE, so
MMIO SPTEs will still be guaranteed to have a unique value within a given
MMU context.

The main motivation is to make it easier to reason about which types of
SPTEs use which available bits.  As a happy side effect, this frees up
two more bits for storing the MMIO generation.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 04:43:41 -04:00
Sean Christopherson
61a1773e2e KVM: x86/mmu: Unexport MMU load/unload functions
Unexport the MMU load and unload helpers now that they are no longer
used (incorrectly) in vendor code.

Opportunistically move the kvm_mmu_sync_roots() declaration into mmu.h,
it should not be exposed to vendor code.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15 04:42:23 -04:00
Jason Baron
b3646477d4 KVM: x86: use static calls to reduce kvm_x86_ops overhead
Convert kvm_x86_ops to use static calls. Note that all kvm_x86_ops are
covered here except for 'pmu_ops and 'nested ops'.

Here are some numbers running cpuid in a loop of 1 million calls averaged
over 5 runs, measured in the vm (lower is better).

Intel Xeon 3000MHz:

           |default    |mitigations=off
-------------------------------------
vanilla    |.671s      |.486s
static call|.573s(-15%)|.458s(-6%)

AMD EPYC 2500MHz:

           |default    |mitigations=off
-------------------------------------
vanilla    |.710s      |.609s
static call|.664s(-6%) |.609s(0%)

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Message-Id: <e057bf1b8a7ad15652df6eeba3f907ae758d3399.1610680941.git.jbaron@akamai.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:30 -05:00
Sean Christopherson
15e6a7e532 KVM: x86/mmu: Use boolean returns for (S)PTE accessors
Return a 'bool' instead of an 'int' for various PTE accessors that are
boolean in nature, e.g. is_shadow_present_pte().  Returning an int is
goofy and potentially dangerous, e.g. if a flag being checked is moved
into the upper 32 bits of a SPTE, then the compiler may silently squash
the entire check since casting to an int is guaranteed to yield a
return value of '0'.

Opportunistically refactor is_last_spte() so that it naturally returns
a bool value instead of letting it implicitly cast 0/1 to false/true.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210123003003.3137525-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 05:27:15 -05:00
Sean Christopherson
eb79cd00ce KVM: x86: Add more protection against undefined behavior in rsvd_bits()
Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-25 18:52:06 -05:00
Paolo Bonzini
2f80d502d6 KVM: x86: fix shift out of bounds reported by UBSAN
Since we know that e >= s, we can reassociate the left shift,
changing the shifted number from 1 to 2 in exchange for
decreasing the right hand side by 1.

Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07 18:07:32 -05:00
Sean Christopherson
dc46515cf8 KVM: x86: Move illegal GPA helper out of the MMU code
Rename kvm_mmu_is_illegal_gpa() to kvm_vcpu_is_illegal_gpa() and move it
to cpuid.h so that's it's colocated with cpuid_maxphyaddr().  The helper
is not MMU specific and will gain a user that is completely unrelated to
the MMU in a future patch.

No functional change intended.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200924194250.19137-5-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-28 07:57:27 -04:00
Sean Christopherson
2a40b9001e KVM: x86: Pull the PGD's level from the MMU instead of recalculating it
Use the shadow_root_level from the current MMU as the root level for the
PGD, i.e. for VMX's EPTP.  This eliminates the weird dependency between
VMX and the MMU where both must independently calculate the same root
level for things to work correctly.  Temporarily keep VMX's calculation
of the level and use it to WARN if the incoming level diverges.

Opportunistically refactor kvm_mmu_load_pgd() to avoid indentation hell,
and rename a 'cr3' param in the load_mmu_pgd prototype that managed to
survive the cr3 purge.

No functional change intended.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200716034122.5998-6-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-30 18:16:47 -04:00
Mohammed Gamal
897861479c KVM: x86: Add helper functions for illegal GPA checking and page fault injection
This patch adds two helper functions that will be used to support virtualizing
MAXPHYADDR in both kvm-intel.ko and kvm.ko.

kvm_fixup_and_inject_pf_error() injects a page fault for a user-specified GVA,
while kvm_mmu_is_illegal_gpa() checks whether a GPA exceeds vCPU address limits.

Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200710154811.418214-2-mgamal@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10 13:07:28 -04:00
Vitaly Kuznetsov
0f04a2ac4f KVM: nSVM: split kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu()
As a preparatory change for moving kvm_mmu_new_pgd() from
nested_prepare_vmcb_save() to nested_svm_init_mmu_context() split
kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu(). This also makes
the code look more like nVMX (kvm_init_shadow_ept_mmu()).

No functional change intended.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200710141157.1640173-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10 12:53:27 -04:00
Sean Christopherson
6ca9a6f3ad KVM: x86/mmu: Add MMU-internal header
Add mmu/mmu_internal.h to hold declarations and definitions that need
to be shared between various mmu/ files, but should not be used by
anything outside of the MMU.

Begin populating mmu_internal.h with declarations of the helpers used by
page_track.c.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08 16:21:54 -04:00
Sean Christopherson
afe8d7e611 KVM: x86/mmu: Move kvm_mmu_available_pages() into mmu.c
Move kvm_mmu_available_pages() from mmu.h to mmu.c, it has a single
caller and has no business being exposed via mmu.h.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622202034.15093-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08 16:21:53 -04:00
Sean Christopherson
f25a9dec2d KVM: x86/mmu: Drop kvm_arch_write_log_dirty() wrapper
Drop kvm_arch_write_log_dirty() in favor of invoking .write_log_dirty()
directly from FNAME(update_accessed_dirty_bits).  "kvm_arch" is usually
used for x86 functions that are invoked from generic KVM, and implies
that there are external callers, neither of which is true.

Remove the check for a non-NULL kvm_x86_ops hook as the call is wrapped
in PTTYPE_EPT and is unconditionally set by VMX.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08 16:21:37 -04:00
Sean Christopherson
2dbebf7ae1 KVM: nVMX: Plumb L2 GPA through to PML emulation
Explicitly pass the L2 GPA to kvm_arch_write_log_dirty(), which for all
intents and purposes is vmx_write_pml_buffer(), instead of having the
latter pull the GPA from vmcs.GUEST_PHYSICAL_ADDRESS.  If the dirty bit
update is the result of KVM emulation (rare for L2), then the GPA in the
VMCS may be stale and/or hold a completely unrelated GPA.

Fixes: c5f983f6e8 ("nVMX: Implement emulated Page Modification Logging")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200622215832.22090-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-22 18:23:03 -04:00
Paolo Bonzini
929d1cfaa6 KVM: MMU: pass arbitrary CR0/CR4/EFER to kvm_init_shadow_mmu
This allows fetching the registers from the hsave area when setting
up the NPT shadow MMU, and is needed for KVM_SET_NESTED_STATE (which
runs long after the CR0, CR4 and EFER values in vcpu have been switched
to hold L2 guest state).

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-01 04:26:03 -04:00
Paolo Bonzini
e7581caca4 KVM: x86: simplify is_mmio_spte
We can simply look at bits 52-53 to identify MMIO entries in KVM's page
tables.  Therefore, there is no need to pass a mask to kvm_mmu_set_mmio_spte_mask.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-27 13:08:29 -04:00
Sean Christopherson
afaf0b2f9b KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
Replace the kvm_x86_ops pointer in common x86 with an instance of the
struct to save one pointer dereference when invoking functions.  Copy the
struct by value to set the ops during kvm_init().

Arbitrarily use kvm_x86_ops.hardware_enable to track whether or not the
ops have been initialized, i.e. a vendor KVM module has been loaded.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321202603.19355-7-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-31 10:48:08 -04:00
Paolo Bonzini
727a7e27cf KVM: x86: rename set_cr3 callback and related flags to load_mmu_pgd
The set_cr3 callback is not setting the guest CR3, it is setting the
root of the guest page tables, either shadow or two-dimensional.
To make this clearer as well as to indicate that the MMU calls it
via kvm_mmu_load_cr3, rename it to load_mmu_pgd.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:58:52 +01:00
Paolo Bonzini
689f3bf216 KVM: x86: unify callbacks to load paging root
Similar to what kvm-intel.ko is doing, provide a single callback that
merges svm_set_cr3, set_tdp_cr3 and nested_svm_set_tdp_cr3.

This lets us unify the set_cr3 and set_tdp_cr3 entries in kvm_x86_ops.
I'm doing that in this same patch because splitting it adds quite a bit
of churn due to the need for forward declarations.  For the same reason
the assignment to vcpu->arch.mmu->set_cr3 is moved to kvm_init_shadow_mmu
from init_kvm_softmmu and nested_svm_init_mmu_context.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:58:51 +01:00
Sean Christopherson
7a02674d15 KVM: x86/mmu: Avoid retpoline on ->page_fault() with TDP
Wrap calls to ->page_fault() with a small shim to directly invoke the
TDP fault handler when the kernel is using retpolines and TDP is being
used.  Single out the TDP fault handler and annotate the TDP path as
likely to coerce the compiler into preferring it over the indirect
function call.

Rename tdp_page_fault() to kvm_tdp_page_fault(), as it's exposed outside
of mmu.c to allow inlining the shim.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-02-12 20:09:42 +01:00
Junaid Shahid
1aa9b9572b kvm: x86: mmu: Recovery of shattered NX large pages
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution.  This removes the performance penalty
for walking deeper EPT page tables.

By default, one large page will last about one hour once the guest
reaches a steady state.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04 20:26:00 +01:00
Sean Christopherson
4af7715110 KVM: x86/mmu: Add explicit access mask for MMIO SPTEs
When shadow paging is enabled, KVM tracks the allowed access type for
MMIO SPTEs so that it can do a permission check on a MMIO GVA cache hit
without having to walk the guest's page tables.  The tracking is done
by retaining the WRITE and USER bits of the access when inserting the
MMIO SPTE (read access is implicitly allowed), which allows the MMIO
page fault handler to retrieve and cache the WRITE/USER bits from the
SPTE.

Unfortunately for EPT, the mask used to retain the WRITE/USER bits is
hardcoded using the x86 paging versions of the bits.  This funkiness
happens to work because KVM uses a completely different mask/value for
MMIO SPTEs when EPT is enabled, and the EPT mask/value just happens to
overlap exactly with the x86 WRITE/USER bits[*].

Explicitly define the access mask for MMIO SPTEs to accurately reflect
that EPT does not want to incorporate any access bits into the SPTE, and
so that KVM isn't subtly relying on EPT's WX bits always being set in
MMIO SPTEs, e.g. attempting to use other bits for experimentation breaks
horribly.

Note, vcpu_match_mmio_gva() explicits prevents matching GVA==0, and all
TDP flows explicit set mmio_gva to 0, i.e. zeroing vcpu->arch.access for
EPT has no (known) functional impact.

[*] Using WX to generate EPT misconfigurations (equivalent to reserved
    bit page fault) ensures KVM can employ its MMIO page fault tricks
    even platforms without reserved address bits.

Fixes: ce88decffd ("KVM: MMU: mmio page fault support")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22 10:09:24 +02:00
Ben Gardon
bc8a3d8925 kvm: mmu: Fix overflow on kvm mmu page limit calculation
KVM bases its memory usage limits on the total number of guest pages
across all memslots. However, those limits, and the calculations to
produce them, use 32 bit unsigned integers. This can result in overflow
if a VM has more guest pages that can be represented by a u32. As a
result of this overflow, KVM can use a low limit on the number of MMU
pages it will allocate. This makes KVM unable to map all of guest memory
at once, prompting spurious faults.

Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch
	introduced no new failures.

Signed-off-by: Ben Gardon <bgardon@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16 15:37:30 +02:00
Sean Christopherson
ea145aacf4 Revert "KVM: MMU: fast invalidate all pages"
Remove x86 KVM's fast invalidate mechanism, i.e. revert all patches
from the original series[1], now that all users of the fast invalidate
mechanism are gone.

This reverts commit 5304b8d37c.

[1] https://lkml.kernel.org/r/1369960590-14138-1-git-send-email-xiaoguangrong@linux.vnet.ibm.com

Cc: Xiao Guangrong <guangrong.xiao@gmail.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-20 22:48:47 +01:00
Vitaly Kuznetsov
44dd3ffa7b x86/kvm/mmu: make vcpu->mmu a pointer to the current MMU
As a preparation to full MMU split between L1 and L2 make vcpu->arch.mmu
a pointer to the currently used mmu. For now, this is always
vcpu->arch.root_mmu. No functional change.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
2018-10-17 00:30:02 +02:00
Wei Yang
4fef0f4913 KVM: x86: move definition PT_MAX_HUGEPAGE_LEVEL and KVM_NR_PAGE_SIZES together
Currently, there are two definitions related to huge page, but a little bit
far from each other and seems loosely connected:

 * KVM_NR_PAGE_SIZES defines the number of different size a page could map
 * PT_MAX_HUGEPAGE_LEVEL means the maximum level of huge page

The number of different size a page could map equals the maximum level
of huge page, which is implied by current definition.

While current implementation may not be kind to readers and further
developers:

 * KVM_NR_PAGE_SIZES looks like a stand alone definition at first sight
 * in case we need to support more level, two places need to change

This patch tries to make these two definition more close, so that reader
and developer would feel more comfortable to manipulate.

Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-17 00:29:42 +02:00
Junaid Shahid
c9470a2e28 kvm: x86: Propagate guest PCIDs to host PCIDs
When using shadow paging mode, propagate the guest's PCID value to
the shadow CR3 in the host instead of always using PCID 0.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06 17:58:56 +02:00
Junaid Shahid
afe828d1de kvm: x86: Add ability to skip TLB flush when switching CR3
Remove the implicit flush from the set_cr3 handlers, so that the
callers are able to decide whether to flush the TLB or not.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06 17:58:55 +02:00
Junaid Shahid
50c28f21d0 kvm: x86: Use fast CR3 switch for nested VMX
Use the fast CR3 switch mechanism to locklessly change the MMU root
page when switching between L1 and L2. The switch from L2 to L1 should
always go through the fast path, while the switch from L1 to L2 should
go through the fast path if L1's CR3/EPTP for L2 hasn't changed
since the last time.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06 17:58:54 +02:00
Junaid Shahid
1c53da3fa3 kvm: x86: Support resetting the MMU context without resetting roots
This adds support for re-initializing the MMU context in a different
mode while preserving the active root_hpa and the prev_root.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06 17:58:54 +02:00
Junaid Shahid
6e42782f51 kvm: x86: Introduce KVM_REQ_LOAD_CR3
The KVM_REQ_LOAD_CR3 request loads the hardware CR3 using the
current root_hpa.

Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-06 17:58:52 +02:00
Linus Torvalds
974aa5630b First batch of KVM changes for 4.15
Common:
  - Python 3 support in kvm_stat
 
  - Accounting of slabs to kmemcg
 
 ARM:
  - Optimized arch timer handling for KVM/ARM
 
  - Improvements to the VGIC ITS code and introduction of an ITS reset
    ioctl
 
  - Unification of the 32-bit fault injection logic
 
  - More exact external abort matching logic
 
 PPC:
  - Support for running hashed page table (HPT) MMU mode on a host that
    is using the radix MMU mode;  single threaded mode on POWER 9 is
    added as a pre-requisite
 
  - Resolution of merge conflicts with the last second 4.14 HPT fixes
 
  - Fixes and cleanups
 
 s390:
  - Some initial preparation patches for exitless interrupts and crypto
 
  - New capability for AIS migration
 
  - Fixes
 
 x86:
  - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs, and
    after-reset state
 
  - Refined dependencies for VMX features
 
  - Fixes for nested SMI injection
 
  - A lot of cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABCAAGBQJaDayXAAoJEED/6hsPKofo/3UH/3HvlcHt+ADTkCU1/iiKAs+i
 0zngIOXIxgHDnV0ww6bV+Znww0BzTYgKCAXX76z603jdpDwG/pzQQcbLDF5ZoJnD
 sQtF10gZinWaRsHlfbLqjrHGL2pGDHO1UKBKLJ0bAIyORPZBxs7i+VmrY/blnr9c
 0wsybJ8RbvwAxjsDL5jeX/z4NehPupmKUc4Lf0eZdSHwVOf9sjn+MP6jJ0r2JcIb
 D+zddPBiLStzN97t4gZpQsrlj3LKrDS+6hY+1TjSvlh+yHKFVFh58VhLm4DuDeb5
 bYOAlWJ/gAWEzfvr5Ld+Nd7SqWWn/14logPkQ4gcU4BI/neAOzk4c6hJfCHl1nk=
 =593n
 -----END PGP SIGNATURE-----

Merge tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Radim Krčmář:
 "First batch of KVM changes for 4.15

  Common:
   - Python 3 support in kvm_stat
   - Accounting of slabs to kmemcg

  ARM:
   - Optimized arch timer handling for KVM/ARM
   - Improvements to the VGIC ITS code and introduction of an ITS reset
     ioctl
   - Unification of the 32-bit fault injection logic
   - More exact external abort matching logic

  PPC:
   - Support for running hashed page table (HPT) MMU mode on a host that
     is using the radix MMU mode; single threaded mode on POWER 9 is
     added as a pre-requisite
   - Resolution of merge conflicts with the last second 4.14 HPT fixes
   - Fixes and cleanups

  s390:
   - Some initial preparation patches for exitless interrupts and crypto
   - New capability for AIS migration
   - Fixes

  x86:
   - Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
     and after-reset state
   - Refined dependencies for VMX features
   - Fixes for nested SMI injection
   - A lot of cleanups"

* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
  KVM: s390: provide a capability for AIS state migration
  KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
  KVM: s390: abstract conversion between isc and enum irq_types
  KVM: s390: vsie: use common code functions for pinning
  KVM: s390: SIE considerations for AP Queue virtualization
  KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
  KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
  KVM: arm/arm64: fix the incompatible matching for external abort
  KVM: arm/arm64: Unify 32bit fault injection
  KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
  KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
  KVM: arm/arm64: vgic-its: New helper functions to free the caches
  KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
  arm/arm64: KVM: Load the timer state when enabling the timer
  KVM: arm/arm64: Rework kvm_timer_should_fire
  KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
  KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
  KVM: arm/arm64: Move phys_timer_emulate function
  KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
  ...
2017-11-16 13:00:24 -08:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Paolo Bonzini
d000653057 KVM: SVM: limit kvm_handle_page_fault to #PF handling
It has always annoyed me a bit how SVM_EXIT_NPF is handled by
pf_interception.  This is also the only reason behind the
under-documented need_unprotect argument to kvm_handle_page_fault.
Let NPF go straight to kvm_mmu_page_fault, just like VMX
does in handle_ept_violation and handle_ept_misconfig.

Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-10-12 14:01:55 +02:00
Radim Krčmář
5f54c8b2d4 Merge branch 'kvm-ppc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
This fix was intended for 4.13, but didn't get in because both
maintainers were on vacation.

Paul Mackerras:
 "It adds mutual exclusion between list_add_rcu and list_del_rcu calls
  on the kvm->arch.spapr_tce_tables list.  Without this, userspace could
  potentially trigger corruption of the list and cause a host crash or
  worse."
2017-09-08 14:40:43 +02:00
Paolo Bonzini
b9dd21e104 KVM: x86: simplify handling of PKRU
Move it to struct kvm_arch_vcpu, replacing guest_pkru_valid with a
simple comparison against the host value of the register.  The write of
PKRU in addition can be skipped if the guest has not enabled the feature.
Once we do this, we need not test OSPKE in the host anymore, because
guest_CR4.PKE=1 implies host_CR4.PKE=1.

The static PKU test is kept to elide the code on older CPUs.

Suggested-by: Yang Zhang <zy107165@alibaba-inc.com>
Fixes: 1be0e61c1f
Cc: stable@vger.kernel.org
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-25 09:28:28 +02:00
Yu Zhang
855feb6736 KVM: MMU: Add 5 level EPT & Shadow page table support.
Extends the shadow paging code, so that 5 level shadow page
table can be constructed if VM is running in 5 level paging
mode.

Also extends the ept code, so that 5 level ept table can be
constructed if maxphysaddr of VM exceeds 48 bits. Unlike the
shadow logic, KVM should still use 4 level ept table for a VM
whose physical address width is less than 48 bits, even when
the VM is running in 5 level paging mode.

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
[Unconditionally reset the MMU context in kvm_cpuid_update.
 Changing MAXPHYADDR invalidates the reserved bit bitmasks.
 - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24 18:09:17 +02:00
Yu Zhang
2a7266a8f9 KVM: MMU: Rename PT64_ROOT_LEVEL to PT64_ROOT_4LEVEL.
Now we have 4 level page table and 5 level page table in 64 bits
long mode, let's rename the PT64_ROOT_LEVEL to PT64_ROOT_4LEVEL,
then we can use PT64_ROOT_5LEVEL for 5 level page table, it's
helpful to make the code more clear.

Also PT64_ROOT_MAX_LEVEL is defined as 4, so that we can just
redefine it to 5 whenever a replacement is needed for 5 level
paging.

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24 18:09:16 +02:00
Yu Zhang
d1cd3ce900 KVM: MMU: check guest CR3 reserved bits based on its physical address width.
Currently, KVM uses CR3_L_MODE_RESERVED_BITS to check the
reserved bits in CR3. Yet the length of reserved bits in
guest CR3 should be based on the physical address width
exposed to the VM. This patch changes CR3 check logic to
calculate the reserved bits at runtime.

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-24 18:09:16 +02:00
Paolo Bonzini
e08d26f071 KVM: x86: simplify ept_misconfig
Calling handle_mmio_page_fault() has been unnecessary since commit
e9ee956e31 ("KVM: x86: MMU: Move handle_mmio_page_fault() call to
kvm_mmu_page_fault()", 2016-02-22).

handle_mmio_page_fault() can now be made static.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-08-18 14:37:48 +02:00
Wanpeng Li
1261bfa326 KVM: async_pf: Add L1 guest async_pf #PF vmexit handler
This patch adds the L1 guest async page fault #PF vmexit handler, such
by L1 similar to ordinary async page fault.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Passed insn parameters to kvm_mmu_page_fault().]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-14 14:25:24 +02:00
Linus Torvalds
c136b84393 PPC:
- Better machine check handling for HV KVM
 - Ability to support guests with threads=2, 4 or 8 on POWER9
 - Fix for a race that could cause delayed recognition of signals
 - Fix for a bug where POWER9 guests could sleep with interrupts pending.
 
 ARM:
 - VCPU request overhaul
 - allow timer and PMU to have their interrupt number selected from userspace
 - workaround for Cavium erratum 30115
 - handling of memory poisonning
 - the usual crop of fixes and cleanups
 
 s390:
 - initial machine check forwarding
 - migration support for the CMMA page hinting information
 - cleanups and fixes
 
 x86:
 - nested VMX bugfixes and improvements
 - more reliable NMI window detection on AMD
 - APIC timer optimizations
 
 Generic:
 - VCPU request overhaul + documentation of common code patterns
 - kvm_stat improvements
 
 There is a small conflict in arch/s390 due to an arch-wide field rename.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJZW4XTAAoJEL/70l94x66DkhMH/izpk54KI17PtyQ9VYI2sYeZ
 BWK6Kl886g3ij4pFi3pECqjDJzWaa3ai+vFfzzpJJ8OkCJT5Rv4LxC5ERltVVmR8
 A3T1I/MRktSC0VJLv34daPC2z4Lco/6SPipUpPnL4bE2HATKed4vzoOjQ3tOeGTy
 dwi7TFjKwoVDiM7kPPDRnTHqCe5G5n13sZ49dBe9WeJ7ttJauWqoxhlYosCGNPEj
 g8ZX8+cvcAhVnz5uFL8roqZ8ygNEQq2mgkU18W8ZZKuiuwR0gdsG0gSBFNTdwIMK
 NoreRKMrw0+oLXTIB8SZsoieU6Qi7w3xMAMabe8AJsvYtoersugbOmdxGCr1lsA=
 =OD7H
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "PPC:
   - Better machine check handling for HV KVM
   - Ability to support guests with threads=2, 4 or 8 on POWER9
   - Fix for a race that could cause delayed recognition of signals
   - Fix for a bug where POWER9 guests could sleep with interrupts pending.

  ARM:
   - VCPU request overhaul
   - allow timer and PMU to have their interrupt number selected from userspace
   - workaround for Cavium erratum 30115
   - handling of memory poisonning
   - the usual crop of fixes and cleanups

  s390:
   - initial machine check forwarding
   - migration support for the CMMA page hinting information
   - cleanups and fixes

  x86:
   - nested VMX bugfixes and improvements
   - more reliable NMI window detection on AMD
   - APIC timer optimizations

  Generic:
   - VCPU request overhaul + documentation of common code patterns
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
  Update my email address
  kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
  x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
  kvm: x86: mmu: allow A/D bits to be disabled in an mmu
  x86: kvm: mmu: make spte mmio mask more explicit
  x86: kvm: mmu: dead code thanks to access tracking
  KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
  KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
  KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
  KVM: x86: remove ignored type attribute
  KVM: LAPIC: Fix lapic timer injection delay
  KVM: lapic: reorganize restart_apic_timer
  KVM: lapic: reorganize start_hv_timer
  kvm: nVMX: Check memory operand to INVVPID
  KVM: s390: Inject machine check into the nested guest
  KVM: s390: Inject machine check into the guest
  tools/kvm_stat: add new interactive command 'b'
  tools/kvm_stat: add new command line switch '-i'
  tools/kvm_stat: fix error on interactive command 'g'
  KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
  ...
2017-07-06 18:38:31 -07:00
Peter Feiner
dcdca5fed5 x86: kvm: mmu: make spte mmio mask more explicit
Specify both a mask (i.e., bits to consider) and a value (i.e.,
pattern of bits that indicates a special PTE) for mmio SPTEs. On
Intel, this lets us pack even more information into the
(SPTE_SPECIAL_MASK | EPT_VMX_RWX_MASK) mask we use for access
tracking liberating all (SPTE_SPECIAL_MASK | (non-misconfigured-RWX))
values.

Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-03 10:43:31 +02:00
Wanpeng Li
9bc1f09f6f KVM: async_pf: avoid async pf injection when in guest mode
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds.
       Not tainted 4.12.0-rc4+ #8
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 gnome-terminal- D    0  1734   1015 0x00000000
 Call Trace:
  __schedule+0x3cd/0xb30
  schedule+0x40/0x90
  kvm_async_pf_task_wait+0x1cc/0x270
  ? __vfs_read+0x37/0x150
  ? prepare_to_swait+0x22/0x70
  do_async_page_fault+0x77/0xb0
  ? do_async_page_fault+0x77/0xb0
  async_page_fault+0x28/0x30

This is triggered by running both win7 and win2016 on L1 KVM simultaneously,
and then gives stress to memory on L1, I can observed this hang on L1 when
at least ~70% swap area is occupied on L0.

This is due to async pf was injected to L2 which should be injected to L1,
L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host
actually), and L1 guest starts accumulating tasks stuck in D state in
kvm_async_pf_task_wait() since missing PAGE_READY async_pfs.

This patch fixes the hang by doing async pf when executing L1 guest.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-11 08:39:24 +02:00
Bandan Das
bab4165e2f kvm: x86: Add a hook for arch specific dirty logging emulation
When KVM updates accessed/dirty bits, this hook can be used
to invoke an arch specific function that implements/emulates
dirty logging such as PML.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-05-09 11:54:16 +02:00
Paolo Bonzini
ae1e2d1082 kvm: nVMX: support EPT accessed/dirty bits
Now use bit 6 of EPTP to optionally enable A/D bits for EPTP.  Another
thing to change is that, when EPT accessed and dirty bits are not in use,
VMX treats accesses to guest paging structures as data reads.  When they
are in use (bit 6 of EPTP is set), they are treated as writes and the
corresponding EPT dirty bit is set.  The MMU didn't know this detail,
so this patch adds it.

We also have to fix up the exit qualification.  It may be wrong because
KVM sets bit 6 but the guest might not.

L1 emulates EPT A/D bits using write permissions, so in principle it may
be possible for EPT A/D bits to be used by L1 even though not available
in hardware.  The problem is that guest page-table walks will be treated
as reads rather than writes, so they would not cause an EPT violation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Fixed typo in walk_addr_generic() comment and changed bit clear +
 conditional-set pattern in handle_ept_violation() to conditional-clear]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-07 16:49:00 +02:00
Bandan Das
812f30b234 kvm: mmu: remove is_present_gpte()
We have two versions of the above function.
To prevent confusion and bugs in the future, remove
the non-FNAME version entirely and replace all calls
with the actual check.

Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-14 09:02:47 +02:00