Commit Graph

2924 Commits

Author SHA1 Message Date
Rafael J. Wysocki
71504e519d tty: 8250_omap: Replace CONFIG_PM_RUNTIME with CONFIG_PM
The 8250_omap serial driver is a new user of CONFIG_PM_RUNTIME.

However, after commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if
PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so
#ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to
depend on CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM in 8250_omap.c.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-19 15:27:58 +01:00
Linus Torvalds
c0f486fde3 More ACPI and power management updates for 3.19-rc1
- Fix a regression in leds-gpio introduced by a recent commit that
    inadvertently changed the name of one of the properties used by
    the driver (Fabio Estevam).
 
  - Fix a regression in the ACPI backlight driver introduced by a
    recent fix that missed one special case that had to be taken
    into account (Aaron Lu).
 
  - Drop the level of some new kernel messages from the ACPI core
    introduced by a recent commit to KERN_DEBUG which they should
    have used from the start and drop some other unuseful KERN_ERR
    messages printed by ACPI (Rafael J Wysocki).
 
  - Revert an incorrect commit modifying the cpupower tool
    (Prarit Bhargava).
 
  - Fix two regressions introduced by recent commits in the OPP
    library and clean up some existing minor issues in that code
    (Viresh Kumar).
 
  - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout
    the tree (or drop it where that can be done) in order to make
    it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki,
    Ulf Hansson, Ludovic Desroches).  There will be one more
    "CONFIG_PM_RUNTIME removal" batch after this one, because some
    new uses of it have been introduced during the current merge
    window, but that should be sufficient to finally get rid of it.
 
  - Make the ACPI EC driver more robust against race conditions
    related to GPE handler installation failures (Lv Zheng).
 
  - Prevent the ACPI device PM core code from attempting to
    disable GPEs that it has not enabled which confuses ACPICA
    and makes it report errors unnecessarily (Rafael J Wysocki).
 
  - Add a "force" command line switch to the intel_pstate driver
    to make it possible to override the blacklisting of some
    systems in that driver if needed (Ethan Zhao).
 
  - Improve intel_pstate code documentation and add a MAINTAINERS
    entry for it (Kristen Carlson Accardi).
 
  - Make the ACPI fan driver create cooling device interfaces
    witn names that reflect the IDs of the ACPI device objects
    they are associated with, except for "generic" ACPI fans
    (PNP ID "PNP0C0B").  That's necessary for user space thermal
    management tools to be able to connect the fans with the
    parts of the system they are supposed to be cooling properly.
    From Srinivas Pandruvada.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJUk0IDAAoJEILEb/54YlRx7fgP/3+yF/0TnEW93j2ALDAQFiLF
 tSv2A2vQC8vtMJjjWx0z/HqPh86gfaReEFZmUJD/Q/e2LXEnxNZJ+QMjcekPVkDM
 mTvcIMc2MR8vOA/oMkgxeaKregrrx7RkCfojd+NWZhVukkjl+mvBHgAnYjXRL+NZ
 unDWGlbHG97vq/3kGjPYhDS00nxHblw8NHFBu5HL5RxwABdWoeZJITwqxXWyuPLw
 nlqNWlOxmwvtSbw2VMKz0uof1nFHyQLykYsMG0ZsyayCRdWUZYkEqmE7GGpCLkLu
 D6yfmlpen6ccIOsEAae0eXBt50IFY9Tihk5lovx1mZmci2SNRg29BqMI105wIn0u
 8b8Ej7MNHp7yMxRpB5WfU90p/y7ioJns9guFZxY0CKaRnrI2+BLt3RscMi3MPI06
 Cu2/WkSSa09fhDPA+pk+VDYsmWgyVawigesNmMP5/cvYO/yYywVRjOuO1k77qQGp
 4dSpFYEHfpxinejZnVZOk2V9MkvSLoSMux6wPV0xM0IE1iD0ulVpHjTJrwp80ph4
 +bfUFVr/vrD1y7EKbf1PD363ZKvJhWhvQWDgETsM1vgLf21PfWO7C2kflIAsWsdQ
 1ukD5nCBRlP4K73hG7bdM6kRztXhUdR0SHg85/t0KB/ExiVqtcXIzB60D0G1lENd
 QlKbq3O4lim1WGuhazQY
 =5fo2
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are regression fixes (leds-gpio, ACPI backlight driver,
  operating performance points library, ACPI device enumeration
  messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device
  PM), some cleanups in the operating performance points (OPP)
  framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of
  minor intel_pstate driver changes, a new MAINTAINERS entry for it and
  an ACPI fan driver change needed for better support of thermal
  management in user space.

  Specifics:

   - Fix a regression in leds-gpio introduced by a recent commit that
     inadvertently changed the name of one of the properties used by the
     driver (Fabio Estevam).

   - Fix a regression in the ACPI backlight driver introduced by a
     recent fix that missed one special case that had to be taken into
     account (Aaron Lu).

   - Drop the level of some new kernel messages from the ACPI core
     introduced by a recent commit to KERN_DEBUG which they should have
     used from the start and drop some other unuseful KERN_ERR messages
     printed by ACPI (Rafael J Wysocki).

   - Revert an incorrect commit modifying the cpupower tool (Prarit
     Bhargava).

   - Fix two regressions introduced by recent commits in the OPP library
     and clean up some existing minor issues in that code (Viresh
     Kumar).

   - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the
     tree (or drop it where that can be done) in order to make it
     possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf
     Hansson, Ludovic Desroches).

     There will be one more "CONFIG_PM_RUNTIME removal" batch after this
     one, because some new uses of it have been introduced during the
     current merge window, but that should be sufficient to finally get
     rid of it.

   - Make the ACPI EC driver more robust against race conditions related
     to GPE handler installation failures (Lv Zheng).

   - Prevent the ACPI device PM core code from attempting to disable
     GPEs that it has not enabled which confuses ACPICA and makes it
     report errors unnecessarily (Rafael J Wysocki).

   - Add a "force" command line switch to the intel_pstate driver to
     make it possible to override the blacklisting of some systems in
     that driver if needed (Ethan Zhao).

   - Improve intel_pstate code documentation and add a MAINTAINERS entry
     for it (Kristen Carlson Accardi).

   - Make the ACPI fan driver create cooling device interfaces witn
     names that reflect the IDs of the ACPI device objects they are
     associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B").

     That's necessary for user space thermal management tools to be able
     to connect the fans with the parts of the system they are supposed
     to be cooling properly.  From Srinivas Pandruvada"

* tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
  MAINTAINERS: add entry for intel_pstate
  ACPI / video: update the skip case for acpi_video_device_in_dod()
  power / PM: Eliminate CONFIG_PM_RUNTIME
  NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / EC: Fix unexpected ec_remove_handlers() invocations
  Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()"
  tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c
  PM: Remove the SET_PM_RUNTIME_PM_OPS() macro
  mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro
  PM / Kconfig: Replace PM_RUNTIME with PM in dependencies
  ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM
  ACPI / PM: Do not disable wakeup GPEs that have not been enabled
  ACPI / utils: Drop error messages from acpi_evaluate_reference()
  ...
2014-12-18 20:28:33 -08:00
Linus Torvalds
e6b5be2be4 Driver core patches for 3.19-rc1
Here's the set of driver core patches for 3.19-rc1.
 
 They are dominated by the removal of the .owner field in platform
 drivers.  They touch a lot of files, but they are "simple" changes, just
 removing a line in a structure.
 
 Other than that, a few minor driver core and debugfs changes.  There are
 some ath9k patches coming in through this tree that have been acked by
 the wireless maintainers as they relied on the debugfs changes.
 
 Everything has been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
 53kAoLeteByQ3iVwWurwwseRPiWa8+MI
 =OVRS
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev_<level>_once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...
2014-12-14 16:10:09 -08:00
Linus Torvalds
37da7bbbe8 TTY/Serial driver patches for 3.19-rc1
Here's the big tty/serial driver update for 3.19-rc1.
 
 There are a number of TTY core changes/fixes in here from Peter Hurley
 that have all been teted in linux-next for a long time now.  There are
 also the normal serial driver updates as well, full details in the
 changelog below.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlSOD/MACgkQMUfUDdst+ymW+wCfbSzoYMRObIImMPWfoQtxkvvN
 rpkAnAtyEP/zZIfkQIuKTSH6FJxocF8V
 =WZt3
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver update for 3.19-rc1.

  There are a number of TTY core changes/fixes in here from Peter Hurley
  that have all been teted in linux-next for a long time now.  There are
  also the normal serial driver updates as well, full details in the
  changelog below"

* tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits)
  serial: pxa: hold port.lock when reporting modem line changes
  tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
  tty: Deletion of unnecessary checks before two function calls
  n_tty: Fix read_buf race condition, increment read_head after pushing data
  serial: of-serial: add PM suspend/resume support
  Revert "serial: of-serial: add PM suspend/resume support"
  Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
  serial: 8250: don't attempt a trylock if in sysrq
  serial: core: Add big-endian iotype
  serial: samsung: use port->fifosize instead of hardcoded values
  serial: samsung: prefer to use fifosize from driver data
  serial: samsung: fix style problems
  serial: samsung: wait for transfer completion before clock disable
  serial: icom: fix error return code
  serial: tegra: clean up tty-flag assignments
  serial: Fix io address assign flow with Fintek PCI-to-UART Product
  serial: mxs-auart: fix tx_empty against shift register
  serial: mxs-auart: fix gpio change detection on interrupt
  serial: mxs-auart: Fix mxs_auart_set_ldisc()
  serial: 8250_dw: Use 64-bit access for OCTEON.
  ...
2014-12-14 15:23:32 -08:00
Linus Torvalds
980f3c344f This is the bulk of GPIO changes for the v3.19 series:
- A new API that allows setting more than one GPIO at the
   time. This is implemented for the new descriptor-based
   API only and makes it possible to e.g. toggle a clock and
   data line at the same time, if the hardware can do this
   with a single register write. Both consumers and drivers
   need new calls, and the core will fall back to driving
   individual lines where needed. Implemented for the MPC8xxx
   driver initially.
 - Patched the mdio-mux-gpio and the serial mctrl driver
   that drives modems to use the new multiple-setting API
   to set several signals simultaneously.
 - Get rid of the global GPIO descriptor array, and instead
   allocate descriptors dynamically for each GPIO on a certain
   GPIO chip. This moves us closer to getting rid of the
   limitation of using the global, static GPIO numberspace.
 - New driver and device tree bindings for 74xx ICs.
 - New driver and device tree bindings for the VF610 Vybrid.
 - Support the RCAR r8a7793 and r8a7794.
 - Guidelines for GPIO device tree bindings trying to get
   things a bit more strict with the advent of combined
   device properties.
 - Suspend/resume support for the MVEBU driver.
 - A slew of minor fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUjgQ7AAoJEEEQszewGV1zuJ8P+wamlDNhJbsgqXPcSCZZFgeP
 1O22VRYqoo/i8mAzNCRi2h6NogO9Da6rCRhHdH35TsuNzIbusHE+btMukj248qJ7
 WYOf25I0ImyUP8kulogW4/+7lYibRLHnN2BSLuAkApofmxDvODPS1KNWHulcOcxl
 VaVsA8wvFzQO1s1Wjv94ctVfs5rqk7mBfPwk61zHuLeETecmKg0e52p0Uzqlq6gi
 UKi9uK3sjQ7kI/+xa+qDrF9GRwRR22oJfD/9zNj8g94iU9iMs5Oh+Zp3RJcvYUSD
 y5BIb+IY2ATy20ZkijWmeP8LJz6pja+C9Ne7lKM0jkv7geGeHGAoavz0n3oUq4oz
 IvUNz6hCAP9PcxWc5a9FFqqORLWrRew6GmZmJvIkmC9K+3UQcWhkzO3vLpfl6Q9h
 S728XexkIlhxG9NcER21bFXV2dw3z/X9dm5mQ473TqJm+wQmRuYcPRg053NbqMcx
 juvkweCksx8qlpnjo/1QXQcVwFM8kuR7xAlVo7zdMDOU5F8pdxRnsTl0cUdx5cPv
 DKeMRg8+FYcHmIoe/EodemIh7cAZtEpijZNNAr9cDmAjifeBjWhCb+zri5SIc96x
 0jKVTXyY4jnHXBVoA0FIl1d2t54yVjh3PYiu0MjeLJ9tyB+Px/nOxW8FrdlFnPJ/
 oP5WK13c8h3bMkxUzsvL
 =ZAhA
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull take two of the GPIO updates:
 "Same stuff as last time, now with a fixup patch for the previous
  compile error plus I ran a few extra rounds of compile-testing.

  This is the bulk of GPIO changes for the v3.19 series:

   - A new API that allows setting more than one GPIO at the time.  This
     is implemented for the new descriptor-based API only and makes it
     possible to e.g. toggle a clock and data line at the same time, if
     the hardware can do this with a single register write.  Both
     consumers and drivers need new calls, and the core will fall back
     to driving individual lines where needed.  Implemented for the
     MPC8xxx driver initially

   - Patched the mdio-mux-gpio and the serial mctrl driver that drives
     modems to use the new multiple-setting API to set several signals
     simultaneously

   - Get rid of the global GPIO descriptor array, and instead allocate
     descriptors dynamically for each GPIO on a certain GPIO chip.  This
     moves us closer to getting rid of the limitation of using the
     global, static GPIO numberspace

   - New driver and device tree bindings for 74xx ICs

   - New driver and device tree bindings for the VF610 Vybrid

   - Support the RCAR r8a7793 and r8a7794

   - Guidelines for GPIO device tree bindings trying to get things a bit
     more strict with the advent of combined device properties

   - Suspend/resume support for the MVEBU driver

   - A slew of minor fixes and improvements"

* tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits)
  gpio: mcp23s08: fix up compilation error
  gpio: pl061: document gpio-ranges property for bindings file
  gpio: pl061: hook request if gpio-ranges avaiable
  gpio: mcp23s08: Add option to configure IRQ output polarity as active high
  gpio: fix deferred probe detection for legacy API
  serial: mctrl_gpio: use gpiod_set_array function
  mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function
  gpio: remove const modifier from gpiod_get_direction()
  gpio: remove gpio_descs global array
  gpio: mxs: implement get_direction callback
  gpio: em: Use dynamic allocation of GPIOs
  gpio: Check if base is positive before calling gpio_is_valid()
  gpio: mcp23s08: Add simple IRQ support for SPI devices
  gpio: mcp23s08: request a shared interrupt
  gpio: mcp23s08: Do not free unrequested interrupt
  gpio: rcar: Add r8a7793 and r8a7794 support
  gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function
  gpiolib: allow simultaneous setting of multiple GPIO outputs
  gpio: mvebu: add suspend/resume support
  gpio: gpio-davinci: remove duplicate check on resource
  ..
2014-12-14 14:05:05 -08:00
Rafael J. Wysocki
d39fe4e557 tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
After commit b2b49ccbdd (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is
selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks
depending on CONFIG_PM_RUNTIME may now be changed to depend on
CONFIG_PM.

Replace CONFIG_PM_RUNTIME with CONFIG_PM everywhere under
drivers/tty/.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-13 00:41:36 +01:00
Linus Torvalds
a7cb7bb664 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...
2014-12-12 10:08:06 -08:00
Linus Torvalds
86c6a2fddf Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle are:

   - 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y.

     This instruments might_sleep() checks to catch places that nest
     blocking primitives - such as mutex usage in a wait loop.  Such
     bugs can result in hard to debug races/hangs.

     Another category of invalid nesting that this facility will detect
     is the calling of blocking functions from within schedule() ->
     sched_submit_work() -> blk_schedule_flush_plug().

     There's some potential for false positives (if secondary blocking
     primitives themselves are not ready yet for this facility), but the
     kernel will warn once about such bugs per bootup, so the warning
     isn't much of a nuisance.

     This feature comes with a number of fixes, for problems uncovered
     with it, so no messages are expected normally.

   - Another round of sched/numa optimizations and refinements, for
     CONFIG_NUMA_BALANCING=y.

   - Another round of sched/dl fixes and refinements.

  Plus various smaller fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  sched: Add missing rcu protection to wake_up_all_idle_cpus
  sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK
  sched/numa: Init numa balancing fields of init_task
  sched/deadline: Remove unnecessary definitions in cpudeadline.h
  sched/cpupri: Remove unnecessary definitions in cpupri.h
  sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task()
  sched/fair: Fix stale overloaded status in the busiest group finding logic
  sched: Move p->nr_cpus_allowed check to select_task_rq()
  sched/completion: Document when to use wait_for_completion_io_*()
  sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC
  sched/fair: Kill task_struct::numa_entry and numa_group::task_list
  sched: Refactor task_struct to use numa_faults instead of numa_* pointers
  sched/deadline: Don't check CONFIG_SMP in switched_from_dl()
  sched/deadline: Reschedule from switched_from_dl() after a successful pull
  sched/deadline: Push task away if the deadline is equal to curr during wakeup
  sched/deadline: Add deadline rq status print
  sched/deadline: Fix artificial overrun introduced by yield_task_dl()
  sched/rt: Clean up check_preempt_equal_prio()
  sched/core: Use dl_bw_of() under rcu_read_lock_sched()
  sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu
  ...
2014-12-09 21:21:34 -08:00
Linus Torvalds
3a647c1d7a ARM: SoC driver updates for 3.19
These are changes for drivers that are intimately tied to some SoC
 and for some reason could not get merged through the respective
 subsystem maintainer tree.
 
 The largest single change here this time around is the Tegra
 iommu/memory controller driver, which gets updated to the new
 iommu DT binding. More drivers like this are likely to follow
 for the following merge window, but we should be able to do
 those through the iommu maintainer.
 
 Other notable changes are:
 * reset controller drivers from the reset maintainer (socfpga, sti, berlin)
 * fixes for the keystone navigator driver merged last time
 * at91 rtc driver changes related to the at91 cleanups
 * ARM perf driver changes from Will Deacon
 * updates for the brcmstb_gisb driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAVIcj4mCrR//JCVInAQIvWg//WD72+2q0RmEvu8r/YN4SDfg5iY7OMzgy
 Jyt6rN1IhXBY5GJL5Hil1q2JP/7o8vypekllohmBYWzXO3ZJ2VK6NPIXEMuzaiCz
 D9gmb+N6FdR2L2iYPv7B/3uOf55pHjBu525+vLspCTOgcWBrLgCnA9e9Yg462AEf
 VP3x+kV0AH25lovEi3mPrc2e46jnl0Mzp3f3PCkPqRSEMn7sxu9ipii+elxvArYp
 jYYCB03ZEBFa7T0e4HD38gnVLbC6dTj47AcSCWYP9WhxJ2RmCQKRBEnJre02hgar
 NPg8z+OrUACIAkvJHzg3WccmXdi0aqQ2JDsl46Tkl7pA6NdyMLfizT3OiZnMRmgc
 34H0ZSxclW+j25aI8OmDpv2ypZev+UAzkbRobcvF+aV/zJeAX88tPgcshfCUVZll
 ZIqO7oJB73nCl1XBLv2ZrLV2tcOox6jL/5LQt0WYA5Szg5upo7D1fZl8v5jXX7eJ
 C62ychuABs6hsmH5jEy+73kdpHbYft7dZfGZxdgq1AIOkdWoynCze/R7Vj24xoXR
 118cTNN9ZTPHmN5yxUvuGoqA3FWOqkJXaTS4W0hRD6OxOGTsTV4FIlRnD+K7feOW
 ng1yfIcvKR1Dx7tsySTHQK+bZGNnovA/ENPK6VDuhbwE62Lx7N5hcbsSIKKwRI9C
 D1m1fC+AIcQ=
 =MwMG
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  The largest single change here this time around is the Tegra
  iommu/memory controller driver, which gets updated to the new iommu DT
  binding.  More drivers like this are likely to follow for the
  following merge window, but we should be able to do those through the
  iommu maintainer.

  Other notable changes are:
   - reset controller drivers from the reset maintainer (socfpga, sti,
     berlin)
   - fixes for the keystone navigator driver merged last time
   - at91 rtc driver changes related to the at91 cleanups
   - ARM perf driver changes from Will Deacon
   - updates for the brcmstb_gisb driver"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
  clocksource: arch_timer: Fix code to use physical timers when requested
  memory: Add NVIDIA Tegra memory controller support
  bus: brcmstb_gisb: Add register offset tables for older chips
  bus: brcmstb_gisb: Look up register offsets in a table
  bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses
  bus: brcmstb_gisb: Make the driver buildable on MIPS
  of: Add NVIDIA Tegra memory controller binding
  ARM: tegra: Move AHB Kconfig to drivers/amba
  amba: Add Kconfig file
  clk: tegra: Implement memory-controller clock
  serial: samsung: Fix serial config dependencies for exynos7
  bus: brcmstb_gisb: resolve section mismatch
  ARM: common: edma: edma_pm_resume may be unused
  ARM: common: edma: add suspend resume hook
  powerpc/iommu: Rename iommu_[un]map_sg functions
  rtc: at91sam9: add DT bindings documentation
  rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
  ARM: at91: add clk_lookup entry for RTT devices
  rtc: at91sam9: rework the Kconfig description
  ...
2014-12-09 14:48:22 -08:00
Greg Kroah-Hartman
dd63af108f Merge 3.18-rc7 into tty-next
This resolves the merge issue with drivers/tty/serial/of_serial.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06 08:17:24 -08:00
Rojhalat Ibrahim
834296a3c6 serial: mctrl_gpio: use gpiod_set_array function
Make the serial_mctrl_gpio driver the first user of the new gpiod_set_array
function, which is now available in the linux-gpio devel tree.
All modem control output signals are now set simultaneously.

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-02 14:25:42 +01:00
Dmitry Eremin-Solenikov
50d1e7d107 serial: pxa: hold port.lock when reporting modem line changes
Both uart_handle_dcd_change() and uart_handle_cts_change() require a
port lock to be held and will emit a warning when lockdep is enabled.
Held corresponding lock.

This fixes the following warnings:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/serial_core.c:2760 uart_handle_dcd_change+0xc8/0xf8()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc5+ #26
[<c000dff8>] (unwind_backtrace) from [<c000bc70>] (show_stack+0x10/0x14)
[<c000bc70>] (show_stack) from [<c00192ac>] (warn_slowpath_common+0x6c/0x8c)
[<c00192ac>] (warn_slowpath_common) from [<c00192e8>] (warn_slowpath_null+0x1c/0x24)
[<c00192e8>] (warn_slowpath_null) from [<c0182984>] (uart_handle_dcd_change+0xc8/0xf8)
[<c0182984>] (uart_handle_dcd_change) from [<c018625c>] (serial_pxa_irq+0x268/0x3b0)
[<c018625c>] (serial_pxa_irq) from [<c004d0d4>] (handle_irq_event_percpu+0x50/0x16c)
[<c004d0d4>] (handle_irq_event_percpu) from [<c004d22c>] (handle_irq_event+0x3c/0x5c)
[<c004d22c>] (handle_irq_event) from [<c004f7d0>] (handle_level_irq+0x94/0x118)
[<c004f7d0>] (handle_level_irq) from [<c004ca0c>] (generic_handle_irq+0x20/0x30)
[<c004ca0c>] (generic_handle_irq) from [<c004cbe0>] (__handle_domain_irq+0x38/0x70)
[<c004cbe0>] (__handle_domain_irq) from [<c00085c4>] (ichp_handle_irq+0x24/0x34)
[<c00085c4>] (ichp_handle_irq) from [<c000c7e4>] (__irq_svc+0x44/0x54)
Exception stack(0xc07c7f58 to 0xc07c7fa0)
7f40:                                                       00000001 00000001
7f60: 00000000 20000013 c07c6000 00000000 00000000 c07ce0a4 c07d7798 00000000
7f80: c07e8fb8 0000004c 00000000 c07c7fa0 c0044798 c0009f20 20000013 ffffffff
[<c000c7e4>] (__irq_svc) from [<c0009f20>] (arch_cpu_idle+0x28/0x38)
[<c0009f20>] (arch_cpu_idle) from [<c003c974>] (cpu_startup_entry+0x1b8/0x220)
[<c003c974>] (cpu_startup_entry) from [<c0338c54>] (start_kernel+0x39c/0x40c)
---[ end trace 4c1b7ae03f6d9d30 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/serial_core.c:2791 uart_handle_cts_change+0xa0/0xdc()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Tainted: G        W      3.18.0-rc5+ #26
[<c000dff8>] (unwind_backtrace) from [<c000bc70>] (show_stack+0x10/0x14)
[<c000bc70>] (show_stack) from [<c00192ac>] (warn_slowpath_common+0x6c/0x8c)
[<c00192ac>] (warn_slowpath_common) from [<c00192e8>] (warn_slowpath_null+0x1c/0x24)
[<c00192e8>] (warn_slowpath_null) from [<c018528c>] (uart_handle_cts_change+0xa0/0xdc)
[<c018528c>] (uart_handle_cts_change) from [<c018624c>] (serial_pxa_irq+0x258/0x3b0)
[<c018624c>] (serial_pxa_irq) from [<c004d0d4>] (handle_irq_event_percpu+0x50/0x16c)
[<c004d0d4>] (handle_irq_event_percpu) from [<c004d22c>] (handle_irq_event+0x3c/0x5c)
[<c004d22c>] (handle_irq_event) from [<c004f7d0>] (handle_level_irq+0x94/0x118)
[<c004f7d0>] (handle_level_irq) from [<c004ca0c>] (generic_handle_irq+0x20/0x30)
[<c004ca0c>] (generic_handle_irq) from [<c004cbe0>] (__handle_domain_irq+0x38/0x70)
[<c004cbe0>] (__handle_domain_irq) from [<c00085c4>] (ichp_handle_irq+0x24/0x34)
[<c00085c4>] (ichp_handle_irq) from [<c000c7e4>] (__irq_svc+0x44/0x54)
Exception stack(0xc07c7f58 to 0xc07c7fa0)
7f40:                                                       00000001 00000001
7f60: 00000000 20000013 c07c6000 00000000 00000000 c07ce0a4 c07d7798 00000000
7f80: c07e8fb8 0000004c 00000000 c07c7fa0 c0044798 c0009f20 20000013 ffffffff
[<c000c7e4>] (__irq_svc) from [<c0009f20>] (arch_cpu_idle+0x28/0x38)
[<c0009f20>] (arch_cpu_idle) from [<c003c974>] (cpu_startup_entry+0x1b8/0x220)
[<c003c974>] (cpu_startup_entry) from [<c0338c54>] (start_kernel+0x39c/0x40c)
---[ end trace 4c1b7ae03f6d9d31 ]---

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:35:49 -08:00
Markus Elfring
48f5cde566 tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put"
The tty_kref_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:35:49 -08:00
Markus Elfring
a211b1af19 tty: Deletion of unnecessary checks before two function calls
The functions put_device() and tty_kref_put() test whether their argument
is NULL and then return immediately.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:35:49 -08:00
Christian Riesch
8bfbe2de76 n_tty: Fix read_buf race condition, increment read_head after pushing data
Commit 19e2ad6a09 ("n_tty: Remove overflow
tests from receive_buf() path") moved the increment of read_head into
the arguments list of read_buf_addr(). Function calls represent a
sequence point in C. Therefore read_head is incremented before the
character c is placed in the buffer. Since the circular read buffer is
a lock-less design since commit 6d76bd2618
("n_tty: Make N_TTY ldisc receive path lockless"), this creates a race
condition that leads to communication errors.

This patch modifies the code to increment read_head _after_ the data
is placed in the buffer and thus fixes the race for non-SMP machines.
To fix the problem for SMP machines, memory barriers must be added in
a separate patch.

Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26 19:35:48 -08:00
Jingchang Lu
8ad3b13526 serial: of-serial: add PM suspend/resume support
This adds suspend/resume support for the of-serial driver
to provide power management support on devices attatched.

The handling may vary since not every of_serial device is
an 8250 port. Currently only 8250 port handling is added
in the suspend/resume function based on the type switch.

Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Joseph Lo <josephl@nvidia.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Tested-by: Florina Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Greg Kroah-Hartman
261119f727 Revert "serial: of-serial: add PM suspend/resume support"
This reverts commit 2dea53bf57.

Turns out to be broken :(

Cc: Jingchang Lu <jingchang.lu@freescale.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Greg Kroah-Hartman
962b0a884a Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type"
This reverts commit 513e438581.

It's broken :(

Cc: Jingchang Lu <jingchang.lu@freescale.com>
Cc: Joseph Lo <josephl@nvidia.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Rabin Vincent
6fad18fa51 serial: 8250: don't attempt a trylock if in sysrq
Attempting to use SysRq via the 8250 serial port with spin lock
debugging on on a uniprocessor system results in the following splat:

 SysRq :
 BUG: spinlock trylock failure on UP on CPU#0, swapper/0
  lock: serial8250_ports+0x0/0x8c0, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0
 CPU: 0 PID: 0 Comm: swapper Not tainted 3.18.0-rc4+ #37
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
  ffffffff8245ba00 ffffffff81628b28 ffffffff812c8d27 ffffffff81628b48
  ffffffff8106812e ffffffff8245ba00 ffffffff814e22ed ffffffff81628b68
  ffffffff810681a6 0000000000000000 0000000000000000 ffffffff81628b88
 Call Trace:
  <IRQ>  [<ffffffff812c8d27>] dump_stack+0x19/0x1b
  [<ffffffff8106812e>] spin_dump+0x7e/0xd0
  [<ffffffff810681a6>] spin_bug+0x26/0x30
  [<ffffffff8106843c>] do_raw_spin_trylock+0x4c/0x60
  [<ffffffff812cdb1d>] _raw_spin_trylock+0x1d/0x60
  [<ffffffff812336d8>] serial8250_console_write+0x68/0x190
  [<ffffffff811eb0b0>] ? sprintf+0x40/0x50
  [<ffffffff8106ab5e>] call_console_drivers.constprop.11+0x9e/0xf0
  [<ffffffff8106b276>] console_unlock+0x3e6/0x490
  [<ffffffff8106b595>] vprintk_emit+0x275/0x530
  [<ffffffff812c869a>] printk+0x4d/0x4f
  [<ffffffff8121e612>] __handle_sysrq+0x62/0x1b0
  [<ffffffff8121e5b5>] ? __handle_sysrq+0x5/0x1b0
  [<ffffffff8121ebc6>] handle_sysrq+0x26/0x30
  [<ffffffff81233157>] serial8250_rx_chars+0x1d7/0x250
  [<ffffffff812338bb>] serial8250_handle_irq+0x7b/0x90
  [<ffffffff812338f3>] serial8250_default_handle_irq+0x23/0x30
  [<ffffffff812318b3>] serial8250_interrupt+0x63/0xe0
  [<ffffffff8106d80e>] handle_irq_event_percpu+0x4e/0x200
  [<ffffffff8106da01>] handle_irq_event+0x41/0x70
  [<ffffffff810701ee>] ? handle_edge_irq+0x1e/0x110
  [<ffffffff8107026e>] handle_edge_irq+0x9e/0x110
  [<ffffffff810041c2>] handle_irq+0x22/0x40
  [<ffffffff812d096e>] do_IRQ+0x4e/0xf0
  [<ffffffff812cf4ed>] common_interrupt+0x6d/0x6d
  <EOI>  [<ffffffff8100acbf>] ? default_idle+0x1f/0xd0
  [<ffffffff8100acbd>] ? default_idle+0x1d/0xd0
  [<ffffffff8100b61f>] arch_cpu_idle+0xf/0x20
  [<ffffffff8105c1db>] cpu_startup_entry+0x25b/0x360
  [<ffffffff812c726e>] rest_init+0xbe/0xd0
  [<ffffffff816a4dcb>] start_kernel+0x339/0x346
  [<ffffffff816a4495>] x86_64_start_reservations+0x2a/0x2c
  [<ffffffff816a4589>] x86_64_start_kernel+0xf2/0xf6
 HELP : loglevel(0-9) reboot(b) crash(c) show-all-locks(d) te...

Before ebade5e833 ("serial: 8250: Clean up the locking for -rt")
this was handled by not even attempting to try the lock if port->sysrq,
since it is known to be taken by the interrupt handler; see
https://bugzilla.kernel.org/show_bug.cgi?id=6716#c1.  Restore that
behavior.

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Kevin Cernekee
3ffb1a8193 serial: core: Add big-endian iotype
Since most drivers interpret UPIO_MEM32 to mean "little-endian" and use
readl/writel to access the registers, add a parallel UPIO_MEM32BE to
request the use of big-endian MMIO accessors (ioread32be/iowrite32be).

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Robert Baldyga
57850a50c1 serial: samsung: use port->fifosize instead of hardcoded values
Hardcoded FIFO size can cause hardware performance limitation.
Using real size value provides better FIFO usage.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Robert Baldyga
2f1ba72d23 serial: samsung: prefer to use fifosize from driver data
If we have fifosize set in driver data we prefer to use it instead of default
fifosize value (which is always 16). If there is defined fifosize for particular
serial we prefer to use it, otherwise we use value from info, which is
common for all serials on given platform.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:40 -08:00
Robert Baldyga
ef4aca7048 serial: samsung: fix style problems
Split lines longer than 80 chars and remove unnecessary whitespaces.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Robert Baldyga
1ff383a4c3 serial: samsung: wait for transfer completion before clock disable
This patch adds waiting until transmit buffer and shifter will be empty
before clock disabling.

Without this fix it's possible to have clock disabled while data was
not transmited yet, which causes unproper state of TX line and problems
in following data transfers.

Cc: <stable@vger.kernel.org> # v2.6.26+
Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Julia Lawall
ddcbad9295 serial: icom: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Johan Hovold
f0c1e46045 serial: tegra: clean up tty-flag assignments
The tty break and error flags are not bit masks so do not to use bitwise
OR when assigning them.

Note that there is no functional change due to the if-else construct and
flag having been initialised to zero (TTY_NORMAL).

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Peter Hung
cb8ee9f08c serial: Fix io address assign flow with Fintek PCI-to-UART Product
The original driver fixed the io address with 0xe000+idx*8,
but real io address assigned from BIOS is dynamically from
read PCI configure space 0x24, 0x20, 0x1c.

The Fintek F81504/F81508/F81512 maybe malfunction without
this patch and malfunction surely when more then 1 PCI card.

Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Janusz Uzycki
2b310ec793 serial: mxs-auart: fix tx_empty against shift register
tx_empty() should test whether both the transmitter fifo and shifter
for the port is empty, ie. the whole last char was transmitted.
The shift register is empty if AUART_STAT_BUSY is cleared.
The patch fixes the function against the shift register.

According to i.MX23 and i.MX28 Reference Manual:
AUART_STAT_TXFE:
 TX FIFO or transmit holding register is empty.

AUART_STAT_BUSY:
 AUART still transmits bits.
 The BUSY signal goes HIGH as soon as the data is written to the
 transmit FIFO (that is, the FIFO is non-empty) and remains asserted
 HIGH while data is being transmitted.
 BUSY is negated only when the transmit FIFO is empty, and the last
 character has been transmitted from the shift register, including
 the stop bits.

Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Janusz Uzycki
08f937f4bc serial: mxs-auart: fix gpio change detection on interrupt
mxs_auart_modem_status() did't detect gpio's state change
because s->mctrl_prev was modified before by mctrl_gpio_get().
The patch introduces mctrl_temp variable to fix the bug.

Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Fabio Estevam
f3006e44dd serial: mxs-auart: Fix mxs_auart_set_ldisc()
Commit 732a84a037 ("serial: core: Pass termios to set_ldisc() notifications")
changed the set_ldisc prototype.

At the time of this commit the mxs_auart driver did not implement set_ldisc,
so that's why it has not been converted.

Adapt also mxs_auart_set_ldisc() so that the following build warning can be
fixed:

drivers/tty/serial/mxs-auart.c:962:2: warning: initialization from
incompatible pointer type
  .set_ldisc      = mxs_auart_set_ldisc,
  ^
drivers/tty/serial/mxs-auart.c:962:2: warning: (near initialization
for 'mxs_auart_ops.set_ldisc')

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Janusz Uzycki <j.uzycki@elproma.com.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
David Daney
bca2092d78 serial: 8250_dw: Use 64-bit access for OCTEON.
Although the existing code appears to work on most hardware, the
hardware designers tell us that 8-bit access to the registers is not
guaranteed to be reliable.  Also the OCTEON simulation environments
prohibit 8-bit accesses.

For these reasons, we use __raw_readq/__raw_writeq for OCTEON.  This
code is protected with #ifdef CONFIG_64BIT so it still builds under
configurations lacking readq/writeq.

We can get rid of the #ifdef __BIG_ENDIAN, as under 64-bit accesses,
OCTEON is byte order invariant.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Aleksey Makarov <aleksey.makarov@auriga.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Fabio Estevam
93d94b37fd serial: imx: Fix warning when building 'allmodconfig'
When CONFIG_SERIAL_IMX_CONSOLE=n and CONFIG_CONSOLE_POLL=y we get the following
build warning:

drivers/tty/serial/imx.c:306:13: warning: 'imx_port_ucrs_save' defined but not used [-Wunused-function]
drivers/tty/serial/imx.c:315:13: warning: 'imx_port_ucrs_restore' defined but not used [-Wunused-function]

imx_port_ucrs_save/restore are only used under CONFIG_SERIAL_IMX_CONSOLE, so
their definitions should be also be protected only by CONFIG_SERIAL_IMX_CONSOLE.

This was detected when building 'allmodconfig'.

Reported-by: Olof's autobuilder <build@lixom.net>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Sebastian Andrzej Siewior
3c59958d58 tty: serial: omap_serial: line is unsigned, don't check < 0
Dan Carpenter reported:
|drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe()
|warn: unsigned 'up.port.line' is never less than zero.
|1025          if (up.port.line < 0) {

Since of_alias_get_id() and pdev->id can get negative I check for the
error via ret variable.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:39 -08:00
Sebastian Andrzej Siewior
54178fe6b3 tty: serial: 8250: omap: line is unsigned, don't check < 0
Dan Carpenter reported:
|drivers/tty/serial/8250/8250_omap.c:1025 omap8250_probe()
|warn: unsigned 'up.port.line' is never less than zero.
|1025          if (up.port.line < 0) {

I (wrongly) assumed that line is an int and compiler didn't complain nor
did sparse. Since of_alias_get_id() and pdev->id can get negative I
check for the error via ret variable.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Axel Lin
6b1f40cf48 tty: serial: men_z135_uart: Add terminating entry for men_z135_ids
The mcb_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Qipan Li
52bec4ed4e serial: sirf: add a new uart type support
in CSR A7DA SoC, uart6 located at BT module and it need multiple clock
sources, so for "sirf,marco-bt-uart" compatible uarts, drivers take 3
clock sources and enable them.

this patch also replaces clk_get by devm_clk_get function and fix DT
binding document in which we missed to fix when we added marco platform
in commit 909102db44 "serial: sirf: add support for Marco chip".

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Joe Perches
e620e54884 tty: pr_warning->pr_warn and logging neatening
Convert the pr_warning to the more common pr_warn.

Other miscellanea:

o Convert unusual PR_FMT define and uses to pr_fmt
o Remove unnecessary OOM message
o Fix grammar in an error message
o Convert a pr_warning with a KERN_ERR to pr_err

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Konrad Zapalowicz
483e91a503 serial: jsm: Fix unnecessary space before function ptr arguments
This commit deals with the checkpatch warning "Unnecessary space before
function pointer arguments".

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Konrad Zapalowicz
5b05e2cbf5 serial: jsm: Replace magic value with the proper define
The changed function flushes the tx UART and the '4' corresponds to the
UART_FCR_CLEAR_XMIT value. This commit replaces the magic number with
this define.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Konrad Zapalowicz
245ae51cec serial: jsm: Fix the alignment of the switch satement
This commit fixes the alignment of the 'case's i the switch statement.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Konrad Zapalowicz
b6501dd86f serial: jsm: Remove unnecessary if statement
The flow of {neo,cls}_param() shows that at this stage the baud rate
has a non-zero value. This fact makes the if clausule obsolete and
acknowledges it's removal.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Konrad Zapalowicz
333f4eb1ba serial: jsm: Remove unnecessary parameter from clear_break()
The 'force' parameter to the {cls,neo}_send_break() function has been
removed because it has not been used. The client to this API (the tty
code) always called this function with only one value.

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Nobuhiro Iwamatsu
f53297fb99 serial: sh-sci: Change checking for error rate of HSCIF
This changes negative values of error rate to be checked, because these
values are valid as error rate. And this changes in the process of adopting
a value close to 0.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 17:06:38 -08:00
Greg Kroah-Hartman
a5e9ab291c Revert "serial: of-serial: add PM suspend/resume support"
This reverts commit 2dea53bf57.

Turns out to be broken :(

Cc: Jingchang Lu <jingchang.lu@freescale.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-25 12:46:39 -08:00
Stephen Boyd
7920408b0c tty: serial: msm_serial: Don't require DT aliases
If there isn't a DT alias then of_alias_get_id() will return
-ENODEV. This will cause the msm_serial driver to fail probe,
when we want to keep the previous behavior where we generated a
dynamic line number at probe time. Restore this behavior by
generating a dynamic id if the line number is still negative
after checking for an alias or in the non-DT case looking at the
.id field of the platform device.

Reported-by: Kevin Hilman <khilman@kernel.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24 11:28:23 -08:00
Peter Hurley
52c40fca1a vt: Fix build breakage when !CONFIG_VT_CONSOLE
Commit 68952076e9 ("vt: Remove
vt_get_kmsg_redirect() from uapi header") fails to compile if
!CONFIG_VT_CONSOLE.

Move macro definition for vt_get_kmsg_redirect() up with file-scope
function declarations.

Reported-by: Jim Davis <jim.epost@gmail.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-22 07:48:51 -08:00
Pankaj Dubey
edeeec85f7 serial: samsung: Fix serial config dependencies for exynos7
Exynos7 has a similar serial controller to that present in older Samsung
SoCs. To re-use the existing serial driver on Exynos7 we need to have
SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
possible because these symbols are dependent on PLAT_SAMSUNG which is
not present for the ARMv8 based exynos7.

Change the dependency of these symbols from PLAT_SAMSUNG to the serial
driver thus making it available on exynos7. As the existing platform
specific code making use of these symbols is related to uart driver this
change in dependency should not cause any issues.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-22 00:09:25 +09:00
Masanari Iida
6774def642 treewide: fix typo in printk and Kconfig
This patch fix spelling typo in printk and Kconfig within
various part of kernel sources.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-11-20 14:56:11 +01:00
Greg Kroah-Hartman
e4c787dac2 Revert "serial: of-serial: fetch line number from DT"
This reverts commit 1bd8324535.

To quote Olof:
	This commit broke a whole lot of tegra boards in last night's
	-next here. In particular, I've been looking at
	tegra20-seaboard, which now doesn't boot with console any more.

Breaking existing systems is bad.

Reported-by: Olof Johansson <olof@lixom.net>
Cc: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-11 14:22:01 +09:00
Greg Kroah-Hartman
394e849b83 Merge 3.18-rc4 into tty-next.
This resolves a merge issue with drivers/tty/serial/8250/8250_mtk.c

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-10 12:42:04 +09:00