Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

Pull trivial tree update from Jiri Kosina:
 "Usual stuff: documentation updates, printk() fixes, etc"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits)
  intel_ips: fix a type in error message
  cpufreq: cpufreq-dt: Move newline to end of error message
  ps3rom: fix error return code
  treewide: fix typo in printk and Kconfig
  ARM: dts: bcm63138: change "interupts" to "interrupts"
  Replace mentions of "list_struct" to "list_head"
  kernel: trace: fix printk message
  scsi: mpt2sas: fix ioctl in comment
  zbud, zswap: change module author email
  clocksource: Fix 'clcoksource' typo in comment
  arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help
  gpio: msm-v1: make boolean argument more obvious
  usb: Fix typo in usb-serial-simple.c
  PCI: Fix comment typo 'COMFIG_PM_OPS'
  powerpc: Fix comment typo 'CONIFG_8xx'
  powerpc: Fix comment typos 'CONFiG_ALTIVEC'
  clk: st: Spelling s/stucture/structure/
  isci: Spelling s/stucture/structure/
  usb: gadget: zero: Spelling s/infrastucture/infrastructure/
  treewide: Fix company name in module descriptions
  ...
This commit is contained in:
Linus Torvalds 2014-12-12 10:08:06 -08:00
commit a7cb7bb664
52 changed files with 92 additions and 92 deletions

View File

@ -11,7 +11,7 @@ Please find an example below:
Clockgen block diagram
-------------------------------------------------------------------
| Flexgen stucture |
| Flexgen structure |
| --------------------------------------------- |
| | ------- -------- -------- | |
clk_sysin | | | | | | | | |

View File

@ -172,7 +172,7 @@ ways.
- eh_strategy_handler() callback
This is one big callback which should perform whole error
handling. As such, it should do all choirs SCSI midlayer
handling. As such, it should do all chores the SCSI midlayer
performs during recovery. This will be discussed in [2-2].
Once recovery is complete, SCSI EH resumes normal operation by
@ -428,7 +428,7 @@ scmd->allowed.
scsi_unjam_host() and it is responsible for whole recovery process.
On completion, the handler should have made lower layers forget about
all failed scmds and either ready for new commands or offline. Also,
it should perform SCSI EH maintenance choirs to maintain integrity of
it should perform SCSI EH maintenance chores to maintain integrity of
SCSI midlayer. IOW, of the steps described in [2-1-2], all steps
except for #1 must be implemented by eh_strategy_handler().

View File

@ -376,7 +376,7 @@ functions and binds them. This way the whole gadget is bound.
configured, so config_groups for particular functions are defined
in the functions implementation files drivers/usb/gadget/f_*.c.
5. Funciton's code is written in such a way that it uses
5. Function's code is written in such a way that it uses
usb_get_function_instance(), which, in turn, calls request_module.
So, provided that modprobe works, modules for particular functions

View File

@ -102,7 +102,7 @@
twd_watchdog: watchdog@1e620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x1e620 0x20>;
interupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
};
};

View File

@ -34,7 +34,7 @@ config ARCH_EXYNOS3
bool "SAMSUNG EXYNOS3"
select ARM_CPU_SUSPEND if PM
help
Samsung EXYNOS3 (Crotex-A7) SoC based systems
Samsung EXYNOS3 (Cortex-A7) SoC based systems
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"

View File

@ -1092,7 +1092,7 @@ static int __init edac_devinit(void)
name = edac_device_names[i];
dev = platform_device_register_simple(name, -1, NULL, 0);
if (IS_ERR(dev)) {
pr_err("Registation of %s failed!\n", name);
pr_err("Registration of %s failed!\n", name);
err = PTR_ERR(dev);
}
}
@ -1103,7 +1103,7 @@ static int __init edac_devinit(void)
dev = platform_device_register_simple("octeon_lmc_edac",
i, NULL, 0);
if (IS_ERR(dev)) {
pr_err("Registation of octeon_lmc_edac %d failed!\n", i);
pr_err("Registration of octeon_lmc_edac %d failed!\n", i);
err = PTR_ERR(dev);
}
}

View File

@ -708,7 +708,7 @@ static int __init octeon_pci_setup(void)
if (IS_ERR(platform_device_register_simple("octeon_pci_edac",
-1, NULL, 0)))
pr_err("Registation of co_pci_edac failed!\n");
pr_err("Registration of co_pci_edac failed!\n");
octeon_pci_dma_init();

View File

@ -661,7 +661,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
if (unlikely((pr && !(mas3 & MAS3_UX)) ||
(!pr && !(mas3 & MAS3_SX)))) {
pr_err_ratelimited(
"%s: Instuction emulation from guest addres %08lx without execute permission\n",
"%s: Instruction emulation from guest address %08lx without execute permission\n",
__func__, geaddr);
return EMULATE_AGAIN;
}
@ -673,7 +673,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
if (has_feature(vcpu, VCPU_FTR_MMU_V2) &&
unlikely((mas2 & MAS2_I) || (mas2 & MAS2_W) || !(mas2 & MAS2_M))) {
pr_err_ratelimited(
"%s: Instuction emulation from guest addres %08lx mismatches storage attributes\n",
"%s: Instruction emulation from guest address %08lx mismatches storage attributes\n",
__func__, geaddr);
return EMULATE_AGAIN;
}
@ -686,7 +686,7 @@ int kvmppc_load_last_inst(struct kvm_vcpu *vcpu, enum instruction_type type,
/* Guard against emulation from devices area */
if (unlikely(!page_is_ram(pfn))) {
pr_err_ratelimited("%s: Instruction emulation from non-RAM host addres %08llx is not supported\n",
pr_err_ratelimited("%s: Instruction emulation from non-RAM host address %08llx is not supported\n",
__func__, addr);
return EMULATE_AGAIN;
}

View File

@ -718,4 +718,4 @@ err3; stb r0,0(r3)
15: addi r1,r1,STACKFRAMESIZE
b exit_vmx_usercopy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
#endif /* CONFIG_ALTIVEC */

View File

@ -653,4 +653,4 @@ _GLOBAL(memcpy_power7)
15: addi r1,r1,STACKFRAMESIZE
ld r3,-STACKFRAMESIZE+STK_REG(R31)(r1)
b exit_vmx_copy /* tail call optimise */
#endif /* CONFiG_ALTIVEC */
#endif /* CONFIG_ALTIVEC */

View File

@ -67,7 +67,7 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
{
__tlbil_va(address, pid);
}
#endif /* CONIFG_8xx */
#endif /* CONFIG_8xx */
#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
extern void _tlbivax_bcast(unsigned long address, unsigned int pid,

View File

@ -220,7 +220,6 @@ config AKEBONO
select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
select MMC_SDHCI
select MMC_SDHCI_PLTFM
select MMC_SDHCI_OF_476GTR
select ATA
select SATA_AHCI_PLATFORM
help

View File

@ -28,7 +28,7 @@ config COMMON_CLK_WM831X
depends on MFD_WM831X
---help---
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
PMICs from Wolfson Microelectronics.
source "drivers/clk/versatile/Kconfig"

View File

@ -197,7 +197,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
ret = allocate_resources(policy->cpu, &cpu_dev, &cpu_reg, &cpu_clk);
if (ret) {
pr_err("%s: Failed to allocate resources\n: %d", __func__, ret);
pr_err("%s: Failed to allocate resources: %d\n", __func__, ret);
return ret;
}

View File

@ -686,7 +686,7 @@ static int gpio_msm_v1_probe(struct platform_device *pdev)
irq_set_chained_handler(irq1, msm_gpio_irq_handler);
irq_set_chained_handler(irq2, msm_gpio_irq_handler);
irq_set_irq_wake(irq1, 1);
irq_set_irq_wake(irq2, 2);
irq_set_irq_wake(irq2, 1);
return 0;
}

View File

@ -204,5 +204,5 @@ static int __init spics_gpio_init(void)
subsys_initcall(spics_gpio_init);
MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
MODULE_DESCRIPTION("STMicroelectronics SPEAr SPI Chip Select Abstraction");
MODULE_LICENSE("GPL");

View File

@ -347,7 +347,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_entry - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_entry(ptr, type, member) \
container_of(ptr, type, member)
@ -356,7 +356,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_first_entry - get the first element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Note, that list is expected to be not empty.
*/
@ -406,7 +406,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry - iterate over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member); \
@ -417,7 +417,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_reverse - iterate backwards over list of given type.
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry_reverse(pos, head, member) \
for (pos = list_entry((head)->prev, typeof(*pos), member); \
@ -428,7 +428,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
* @pos: the type * to use as a start point
* @head: the head of the list
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Prepares a pos entry for use as a start point in list_for_each_entry_continue().
*/
@ -439,7 +439,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_continue - continue iteration over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Continue to iterate over list of given type, continuing after
* the current position.
@ -453,7 +453,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_continue_reverse - iterate backwards from the given point
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Start to iterate over list of given type backwards, continuing after
* the current position.
@ -467,7 +467,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_from - iterate over list of given type from the current point
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type, continuing from current position.
*/
@ -480,7 +480,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \
@ -493,7 +493,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type, continuing after current point,
* safe against removal of list entry.
@ -509,7 +509,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type from current point, safe against
* removal of list entry.
@ -524,7 +524,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate backwards over list of given type, safe against removal
* of list entry.

View File

@ -1334,7 +1334,7 @@ init_card(struct l1oip *hc, int pri, int bundle)
if (id[l1oip_cnt] == 0) {
printk(KERN_WARNING "Warning: No 'id' value given or "
"0, this is highly unsecure. Please use 32 "
"bit randmom number 0x...\n");
"bit random number 0x...\n");
}
hc->id = id[l1oip_cnt];
if (debug & DEBUG_L1OIP_INIT)

View File

@ -290,7 +290,7 @@ struct cx18_options {
* list_entry_is_past_end - check if a previous loop cursor is off list end
* @pos: the type * previously used as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Check if the entry's list_head is the head of the list, thus it's not a
* real entry but was the loop cursor that walked past the end

View File

@ -490,7 +490,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
if(detected == 0)
printk("budget-patch not detected or saa7146 in non-default state.\n"
"try enabling ressetting of 7146 with MASK_31 in MC1 register\n");
"try enabling resetting of 7146 with MASK_31 in MC1 register\n");
else
printk("BUDGET-PATCH DETECTED.\n");

View File

@ -48,7 +48,7 @@ MODULE_DEVICE_TABLE(pci, atl1c_pci_tbl);
MODULE_AUTHOR("Jie Yang");
MODULE_AUTHOR("Qualcomm Atheros Inc., <nic-devel@qualcomm.com>");
MODULE_DESCRIPTION("Qualcom Atheros 100/1000M Ethernet Network Driver");
MODULE_DESCRIPTION("Qualcomm Atheros 100/1000M Ethernet Network Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(ATL1C_DRV_VERSION);

View File

@ -724,5 +724,5 @@ static int __init plgpio_init(void)
subsys_initcall(plgpio_init);
MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
MODULE_DESCRIPTION("ST Microlectronics SPEAr PLGPIO driver");
MODULE_DESCRIPTION("STMicroelectronics SPEAr PLGPIO driver");
MODULE_LICENSE("GPL");

View File

@ -593,7 +593,7 @@ static void ips_disable_gpu_turbo(struct ips_driver *ips)
return;
if (!ips->gpu_turbo_disable())
dev_err(&ips->dev->dev, "failed to disable graphis turbo\n");
dev_err(&ips->dev->dev, "failed to disable graphics turbo\n");
else
ips->__gpu_turbo_on = false;
}

View File

@ -1090,7 +1090,7 @@ tape_3590_print_io_sim_msg_f1(struct tape_device *device, struct irb *irb)
"channel path 0x%x on CU",
sense->fmt.f71.md[1]);
else
snprintf(service, BUFSIZE, "Repair will disable cannel"
snprintf(service, BUFSIZE, "Repair will disable channel"
" paths (0x%x-0x%x) on CU",
sense->fmt.f71.md[1], sense->fmt.f71.md[2]);
break;
@ -1481,7 +1481,7 @@ tape_3590_irq(struct tape_device *device, struct tape_request *request,
}
if (irb->scsw.cmd.dstat & DEV_STAT_CHN_END) {
DBF_EVENT(2, "cannel end\n");
DBF_EVENT(2, "channel end\n");
return TAPE_IO_PENDING;
}

View File

@ -588,7 +588,7 @@ int isci_task_abort_task(struct sas_task *task)
ret = TMF_RESP_FUNC_COMPLETE;
} else {
/* Fill in the tmf stucture */
/* Fill in the tmf structure */
isci_task_build_abort_task_tmf(&tmf, isci_tmf_ssp_task_abort,
old_request);

View File

@ -166,7 +166,7 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance)
XXX: Since bus errors in the PDMA routines never happen on my
computer, the bus error code is untested.
If the code works as intended, a bus error results in Pseudo-DMA
beeing disabled, meaning that the driver switches to slow handshake.
being disabled, meaning that the driver switches to slow handshake.
If bus errors are NOT extremely rare, this has to be changed.
*/

View File

@ -6783,7 +6783,7 @@ static int __init megasas_init(void)
rval = pci_register_driver(&megasas_pci_driver);
if (rval) {
printk(KERN_DEBUG "megasas: PCI hotplug regisration failed \n");
printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
goto err_pcidrv;
}

View File

@ -224,7 +224,7 @@ struct mpt2_ioctl_eventreport {
};
/**
* struct mpt2_ioctl_command - generic mpt firmware passthru ioclt
* struct mpt2_ioctl_command - generic mpt firmware passthru ioctl
* @hdr - generic header
* @timeout - command timeout in seconds. (if zero then use driver default
* value).

View File

@ -383,6 +383,7 @@ static int ps3rom_probe(struct ps3_system_bus_device *_dev)
if (!host) {
dev_err(&dev->sbd.core, "%s:%u: scsi_host_alloc failed\n",
__func__, __LINE__);
error = -ENOMEM;
goto fail_teardown;
}

View File

@ -335,7 +335,7 @@ static int target_xcopy_parse_segment_descriptors(struct se_cmd *se_cmd,
desc += XCOPY_SEGMENT_DESC_LEN;
break;
default:
pr_err("XCOPY unspported segment descriptor"
pr_err("XCOPY unsupported segment descriptor"
"type: 0x%02x\n", desc[0]);
goto out;
}

View File

@ -701,7 +701,7 @@ config PDC_CONSOLE
Saying Y here will enable the software based PDC console to be
used as the system console. This is useful for machines in
which the hardware based console has not been written yet. The
following steps must be competed to use the PDC console:
following steps must be completed to use the PDC console:
1. create the device entry (mknod /dev/ttyB0 c 11 0)
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0

View File

@ -396,7 +396,7 @@ static int hidg_setup(struct usb_function *f,
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8
| HID_REQ_SET_REPORT):
VDBG(cdev, "set_report | wLenght=%d\n", ctrl->wLength);
VDBG(cdev, "set_report | wLength=%d\n", ctrl->wLength);
goto stall;
break;

View File

@ -28,7 +28,7 @@
*
* Why is *this* driver using two configurations, rather than setting up
* two interfaces with different functions? To help verify that multiple
* configuration infrastucture is working correctly; also, so that it can
* configuration infrastructure is working correctly; also, so that it can
* work with low capability USB controllers without four bulk endpoints.
*/

View File

@ -132,7 +132,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
if (allocated_max > uframe_periodic_max) {
ehci_info(ehci,
"cannot decrease uframe_periodic_max becase "
"cannot decrease uframe_periodic_max because "
"periodic bandwidth is already allocated "
"(%u > %u)\n",
allocated_max, uframe_periodic_max);

View File

@ -4958,7 +4958,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
if (allocated_max > uframe_periodic_max) {
fotg210_info(fotg210,
"cannot decrease uframe_periodic_max becase "
"cannot decrease uframe_periodic_max because "
"periodic bandwidth is already allocated "
"(%u > %u)\n",
allocated_max, uframe_periodic_max);

View File

@ -4893,7 +4893,7 @@ static ssize_t store_uframe_periodic_max(struct device *dev,
if (allocated_max > uframe_periodic_max) {
fusbh200_info(fusbh200,
"cannot decrease uframe_periodic_max becase "
"cannot decrease uframe_periodic_max because "
"periodic bandwidth is already allocated "
"(%u > %u)\n",
allocated_max, uframe_periodic_max);

View File

@ -64,7 +64,7 @@ DEVICE(vivopay, VIVOPAY_IDS);
/* Motorola USB Phone driver */
#define MOTO_IDS() \
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */ \
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */ \
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Motorola phone */ \
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */ \
{ USB_DEVICE(0x22b8, 0x2c84) }, /* Motorola VE240 phone */ \
{ USB_DEVICE(0x22b8, 0x2c64) } /* Motorola V950 phone */

View File

@ -570,5 +570,5 @@ static struct platform_driver exynos_mipi_dsi_driver = {
module_platform_driver(exynos_mipi_dsi_driver);
MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
MODULE_DESCRIPTION("Samusung SoC MIPI-DSI driver");
MODULE_DESCRIPTION("Samsung SoC MIPI-DSI driver");
MODULE_LICENSE("GPL");

View File

@ -876,5 +876,5 @@ int exynos_mipi_dsi_fifo_clear(struct mipi_dsim_device *dsim,
}
MODULE_AUTHOR("InKi Dae <inki.dae@samsung.com>");
MODULE_DESCRIPTION("Samusung SoC MIPI-DSI common driver");
MODULE_DESCRIPTION("Samsung SoC MIPI-DSI common driver");
MODULE_LICENSE("GPL");

View File

@ -2772,7 +2772,7 @@ int journal_init(struct super_block *sb, const char *j_dev_name,
if (journal_init_dev(sb, journal, j_dev_name) != 0) {
reiserfs_warning(sb, "sh-462",
"unable to initialize jornal device");
"unable to initialize journal device");
goto free_and_return;
}

View File

@ -346,7 +346,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_entry - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_entry(ptr, type, member) \
container_of(ptr, type, member)
@ -355,7 +355,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_first_entry - get the first element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Note, that list is expected to be not empty.
*/
@ -366,7 +366,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_last_entry - get the last element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Note, that list is expected to be not empty.
*/
@ -377,7 +377,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_first_entry_or_null - get the first element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Note that if the list is empty, it returns NULL.
*/
@ -387,7 +387,7 @@ static inline void list_splice_tail_init(struct list_head *list,
/**
* list_next_entry - get the next element in list
* @pos: the type * to cursor
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_next_entry(pos, member) \
list_entry((pos)->member.next, typeof(*(pos)), member)
@ -395,7 +395,7 @@ static inline void list_splice_tail_init(struct list_head *list,
/**
* list_prev_entry - get the prev element in list
* @pos: the type * to cursor
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_prev_entry(pos, member) \
list_entry((pos)->member.prev, typeof(*(pos)), member)
@ -441,7 +441,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry - iterate over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry(pos, head, member) \
for (pos = list_first_entry(head, typeof(*pos), member); \
@ -452,7 +452,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_reverse - iterate backwards over list of given type.
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry_reverse(pos, head, member) \
for (pos = list_last_entry(head, typeof(*pos), member); \
@ -463,7 +463,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_prepare_entry - prepare a pos entry for use in list_for_each_entry_continue()
* @pos: the type * to use as a start point
* @head: the head of the list
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Prepares a pos entry for use as a start point in list_for_each_entry_continue().
*/
@ -474,7 +474,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_continue - continue iteration over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Continue to iterate over list of given type, continuing after
* the current position.
@ -488,7 +488,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_continue_reverse - iterate backwards from the given point
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Start to iterate over list of given type backwards, continuing after
* the current position.
@ -502,7 +502,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_for_each_entry_from - iterate over list of given type from the current point
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type, continuing from current position.
*/
@ -515,7 +515,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_first_entry(head, typeof(*pos), member), \
@ -528,7 +528,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type, continuing after current point,
* safe against removal of list entry.
@ -544,7 +544,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate over list of given type from current point, safe against
* removal of list entry.
@ -559,7 +559,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Iterate backwards over list of given type, safe against removal
* of list entry.
@ -574,7 +574,7 @@ static inline void list_splice_tail_init(struct list_head *list,
* list_safe_reset_next - reset a stale list_for_each_entry_safe loop
* @pos: the loop cursor used in the list_for_each_entry_safe loop
* @n: temporary storage used in list_for_each_entry_safe
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* list_safe_reset_next is not safe to use in general if the list may be
* modified concurrently (eg. the lock is dropped in the loop body). An

View File

@ -69,7 +69,7 @@ struct ieee1394_device_id {
* @bDeviceClass: Class of device; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Device classes specify behavior of all
* the interfaces on a devices.
* the interfaces on a device.
* @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
* @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
* @bInterfaceClass: Class of interface; numbers are assigned

View File

@ -176,7 +176,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
* plist_for_each_entry - iterate over list of given type
* @pos: the type * to use as a loop counter
* @head: the head for your list
* @mem: the name of the list_struct within the struct
* @mem: the name of the list_head within the struct
*/
#define plist_for_each_entry(pos, head, mem) \
list_for_each_entry(pos, &(head)->node_list, mem.node_list)
@ -185,7 +185,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
* plist_for_each_entry_continue - continue iteration over list of given type
* @pos: the type * to use as a loop cursor
* @head: the head for your list
* @m: the name of the list_struct within the struct
* @m: the name of the list_head within the struct
*
* Continue to iterate over list of given type, continuing after
* the current position.
@ -198,7 +198,7 @@ extern void plist_requeue(struct plist_node *node, struct plist_head *head);
* @pos: the type * to use as a loop counter
* @n: another type * to use as temporary storage
* @head: the head for your list
* @m: the name of the list_struct within the struct
* @m: the name of the list_head within the struct
*
* Iterate over list of given type, safe against removal of list entry.
*/
@ -229,7 +229,7 @@ static inline int plist_node_empty(const struct plist_node *node)
* plist_first_entry - get the struct for the first entry
* @head: the &struct plist_head pointer
* @type: the type of the struct this is embedded in
* @member: the name of the list_struct within the struct
* @member: the name of the list_head within the struct
*/
#ifdef CONFIG_DEBUG_PI_LIST
# define plist_first_entry(head, type, member) \
@ -246,7 +246,7 @@ static inline int plist_node_empty(const struct plist_node *node)
* plist_last_entry - get the struct for the last entry
* @head: the &struct plist_head pointer
* @type: the type of the struct this is embedded in
* @member: the name of the list_struct within the struct
* @member: the name of the list_head within the struct
*/
#ifdef CONFIG_DEBUG_PI_LIST
# define plist_last_entry(head, type, member) \

View File

@ -241,7 +241,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
* list_entry_rcu - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* This primitive may safely run concurrently with the _rcu list-mutation
* primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
@ -278,7 +278,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
* list_first_or_null_rcu - get the first element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Note that if the list is empty, it returns NULL.
*
@ -296,7 +296,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
* list_for_each_entry_rcu - iterate over rcu list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* This list-traversal primitive may safely run concurrently with
* the _rcu list-mutation primitives such as list_add_rcu()
@ -311,7 +311,7 @@ static inline void list_splice_init_rcu(struct list_head *list,
* list_for_each_entry_continue_rcu - continue iteration over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*
* Continue to iterate over list of given type, continuing after
* the current position.

View File

@ -554,7 +554,7 @@ struct Scsi_Host {
* __devices is protected by the host_lock, but you should
* usually use scsi_device_lookup / shost_for_each_device
* to access it and don't care about locking yourself.
* In the rare case of beeing in irq context you can use
* In the rare case of being in irq context you can use
* their __ prefixed variants with the lock held. NEVER
* access this list directly from a driver.
*/

View File

@ -792,7 +792,7 @@ int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
/* Initialize mult/shift and max_idle_ns */
__clocksource_updatefreq_scale(cs, scale, freq);
/* Add clocksource to the clcoksource list */
/* Add clocksource to the clocksource list */
mutex_lock(&clocksource_mutex);
clocksource_enqueue(cs);
clocksource_enqueue_watchdog(cs);

View File

@ -2031,7 +2031,7 @@ void trace_printk_init_buffers(void)
pr_warning("** trace_printk() being used. Allocating extra memory. **\n");
pr_warning("** **\n");
pr_warning("** This means that this is a DEBUG kernel and it is **\n");
pr_warning("** unsafe for produciton use. **\n");
pr_warning("** unsafe for production use. **\n");
pr_warning("** **\n");
pr_warning("** If you see this message and you are not debugging **\n");
pr_warning("** the kernel, report this immediately to your vendor! **\n");

View File

@ -619,5 +619,5 @@ module_init(init_zbud);
module_exit(exit_zbud);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Seth Jennings <sjenning@linux.vnet.ibm.com>");
MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
MODULE_DESCRIPTION("Buddy Allocator for Compressed Pages");

View File

@ -951,5 +951,5 @@ error:
late_initcall(init_zswap);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Seth Jennings <sjenning@linux.vnet.ibm.com>");
MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
MODULE_DESCRIPTION("Compressed cache for swap pages");

View File

@ -34,7 +34,7 @@ struct list_head {
* list_entry - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_entry(ptr, type, member) \
container_of(ptr, type, member)
@ -43,7 +43,7 @@ struct list_head {
* list_for_each_entry - iterate over list of given type
* @pos: the type * to use as a loop cursor.
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry(pos, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member); \
@ -55,7 +55,7 @@ struct list_head {
* @pos: the type * to use as a loop cursor.
* @n: another type * to use as temporary storage
* @head: the head for your list.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_for_each_entry_safe(pos, n, head, member) \
for (pos = list_entry((head)->next, typeof(*pos), member), \

View File

@ -342,7 +342,7 @@ int main(int argc, char *argv[])
iobuf[i].requested = ret;
printf("submit: %d requests buf: %d\n", ret, i);
} else
perror("unable to submit reqests");
perror("unable to submit requests");
}
/* if event is ready to read */

View File

@ -98,7 +98,7 @@ static inline void list_del(struct list_head *entry)
* list_entry - get the struct for this entry
* @ptr: the &struct list_head pointer.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
* @member: the name of the list_head within the struct.
*/
#define list_entry(ptr, type, member) \
container_of(ptr, type, member)