It's been deprecated behind a kconfig option for almost
two years and hasn't really been supported for years before
that. DDX support was dropped more than three years ago.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds initial DP 1.2 MST support to radeon, on CAYMAN
and up in theory.
This is off by default.
v2: agd5f:
- add UNIPHY3 offsets
- move atom cmd table code into atombios_encoders.c
- whitespace cleanup
- replace some magic numbers with proper defines
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The atombios tables have an unfortunate restriction on only
being able to write 12 bytes, MST really wants 16-bytes here,
and since the hw can do it, we should just write directly to it.
This uses a module option to allow for it now, and maybe
we should provide the old code as a fallback for a while.
v2: (agd5f)
- move registers to a proper register header
- only enable on DCE5+
- enable by default on DCE5+
- Switch pad to aux mode before using it
- reformat instance handling to better match the
rest of the driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In cases where MMU_NOTIFIER is not available, userptr will not be
available. Similar to i915, although not making an exception for
CAP_SYS_ADMIN.
The proposed userspace patches for userptr seem to handle the fall-
back properly, so a userptr-less kernel should not be a problem.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously we just allocated space for four hardware semaphores
in each software semaphore object. Make software semaphore objects
represent only one hardware semaphore address again by splitting
the sync code into it's own object.
v2: fix typo in comment
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds the interface between the radeon driver and the amdkfd driver.
The interface implementation is contained in radeon_kfd.c and radeon_kfd.h.
The interface itself is represented by a pointer to struct
kfd_dev. The pointer is located inside radeon_device structure.
All the register accesses that amdkfd need are done using this interface. This
allows us to avoid direct register accesses in amdkfd proper, while also
avoiding locking between amdkfd and radeon.
The single exception is the doorbells that are used in both of the drivers.
However, because they are located in separate pci bar pages, the danger of
sharing registers between the drivers is minimal.
Having said that, we are planning to move the doorbells as well to radeon.
v3:
Add interface for sa manager init and fini. The init function will allocate a
buffer on system memory and pin it to the GART address space via the radeon sa
manager.
All mappings of buffers to GART address space are done via the radeon sa
manager. The interface of allocate memory will use the radeon sa manager to sub
allocate from the single buffer that was allocated during the init function.
Change lower_32/upper_32 calls to use linux macros
Add documentation for the interface
v4:
Change ptr field type in kgd_mem from uint32_t* to void* to match to type that
is returned by radeon_sa_bo_cpu_addr
v5:
Change format of mqd structure to work with latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime.
Move generic kfd-->kgd interface and other generic kgd definitions to a generic
header file that will be used by AMD's radeon and amdgpu drivers
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Most of that functionality is only used by r600_hdmi.c
and I'm planning to change that further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Radeon UMS is the last user of drm_buffer. Move it out of sight so radeon
can drop it together with UMS.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
radeon userptr support.
* 'drm-next-3.18' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: allow userptr write access under certain conditions
drm/radeon: add userptr flag to register MMU notifier v3
drm/radeon: add userptr flag to directly validate the BO to GTT
drm/radeon: add userptr flag to limit it to anonymous memory v2
drm/radeon: add userptr support v8
Conflicts:
drivers/gpu/drm/radeon/radeon_prime.c
In the Makefile, radeon_uvd.o is added to radeon-y twice.
As it belongs to the UVD block marked with a comment, the other include
from the block of includes labelled as "KMS driver" is deleted.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Whenever userspace mapping related to our userptr change
we wait for it to become idle and unmap it from GTT.
v2: rebased, fix mutex unlock in error path
v3: improve commit message
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both on their own are complex enough.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are needed to properly handle more frequently
updated firmware.
v2: add new firmware helper functions as well.
v3: update to latest format
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCE 3.1 and 3.2 should be programmed in a different way than DCE 2 and
DCE 3. The order of setting registers and sets of registers are
different.
It's still unsure how we will handle DCE 3.1 vs. DCE 3.2, since they
have few differences as well.
For now separate DCE 2 and DCE 3 path, so we can work on it without a
risk of breaking DCE 3.1+.
This has been tested for possible regressions on DCE32 HD4550 (RV710).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only VCE 2.0 support so far.
v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: Christian König <christian.koenig@amd.com>
Similar to DCE4/5, but supports multiple audio pins
which can be assigned per afmt block.
v2: rework the driver to handle more than one audio
pin.
v3: try different dto reg
v4: properly program dto
v5 (ck): change dto programming order
v6: program speaker allocation block
v7: rebase
v8: rebase on Rafał's changes
v9: integrated Rafał's comments, update to latest
drm_edid_to_speaker_allocation API
v10: add missing line break in error message
v11: add back audio enabled messages
v12: fix copy paste typo in r600_audio_enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Rafał Miłecki <zajec5@gmail.com>
Similar to separating the UVD code, just put the DMA
functions into separate files.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our different hardware blocks are actually completely
separated, so it doesn't make much sense any more to
structure the code by pure chipset generations.
Start restructuring the code by separating our the UVD block.
v2: updated commit message
v3: rebased and restructurized start/stop functions for kv dpm.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for btc asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen switching
Set radeon.dpm=1 to enable.
v2: remove unused radeon_atombios.c changes,
make missing smc ucode non-fatal
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for KB/KV asics. This includes:
- dynamic engine clock scaling
- dynamic voltage scaling
- power containment
- shader power scaling
Set radeon.dpm=1 to enable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for SI asics. This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2/gen3 switching
- power containment
- shader power scaling
Set radeon.dpm=1 to enable.
v2: enable hainan support, rebase
v3: guard acpi stuff
v4: fix 64 bit math
v5: fix 64 bit div harder
v6: fix thermal interrupt check noticed by Jerome
v7: attempt fix state enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for cayman asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching (requires additional acpi support)
- power containment
- shader power scaling
Set radeon.dpm=1 to enable.
v2: fold in tdp fix
v3: fix indentation
v4: fix 64 bit div
v5: attempt to fix state enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
This adds dpm support for trinity asics. This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling
set radeon.dpm=1 to enable it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for sumo asics. This includes:
- clockgating
- powergating
- dynamic engine clock scaling
- dynamic voltage scaling
set radeon.dpm=1 to enable it.
v2: fix indention
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
This adds dpm support for rv7xx asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching
Set radeon.dpm=1 to enable.
v2: reduce stack usage
v3: fix 64 bit div
v4: fix state enable
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds dpm support for rv6xx asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2 switching
Set radeon.dpm=1 to enable.
v2: remove duplicate line
v3: fix thermal interrupt check noticed by Jerome
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
This adds dpm support for rs780/rs880 asics. This includes:
- clockgating
- dynamic engine clock scaling
- dynamic voltage scaling
set radeon.dpm=1 to enable it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sets up the GFX ring and loads ucode for GFX and Compute.
Todo:
- handle compute queue setup.
v2: add documentation
v3: integrate with latest reset changes
v4: additional init fixes
v5: scratch reg write back no longer supported on CIK
v6: properly set CP_RB0_BASE_HI
v7: rebase
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: tiling fixes
v3: more tiling fixes
v4: more tiling fixes
v5: additional register init
v6: rebase
v7: fix gb_addr_config for KV/KB
v8: drop wip KV bits for now, add missing config reg
v9: fix cu count on Bonaire
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Just everything needed to decode videos using UVD.
v6: just all the bugfixes and support for R7xx-SI merged in one patch
v7: UVD_CGC_GATE is a write only register, lockup detection fix
v8: split out VRAM fallback changes, remove support for RV770,
add support for HEMLOCK, add buffer sizes checks
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KMS support is out and stable for a couple of years now and
the userspace code has deprecated or abandoned the old UMS interface.
So make the KMS interface the default and deprecate the UMS interface
in the kernel as well.
v2: rebased on alex/drm-next-3.9-wip
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This adds prime->fd and fd->prime support to radeon.
It passes the sg object to ttm and then populates
the gart entries using it.
Compile tested only.
v2: stub kmap + use new helpers + add reimporting
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Starting with DCE3 hardware, atom contains a general purpose
ProcessI2cChannelTransaction similar to ProcessAuxChannelTransaction.
Add an implementation using the atom tables for DCE3+ hardware.
This should be a little less CPU intensive than bit banging and
may work better in certain cases.
Enable it by setting the radeon hw_i2c module parameter to 1. E.g.,
radeon.hw_i2c=1
on the kernel command line in grub.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Somewhat specializaed sub-allocator designed to perform sub-allocation
for command buffer not only for current cs ioctl but for future command
submission ioctl as well. Patch also convert current ib pool to use
the sub allocator. Idea is that ib poll buffer can be share with other
command buffer submission not having 64K granularity.
v2 Harmonize pool handling and add suspend/resume callback to pin/unpin
sa bo (tested on rv280, rv370, r420, rv515, rv610, rv710, redwood, cayman,
rs480, rs690, rs880)
v3 Simplify allocator
v4 Fix radeon_ib_get error path to properly free fence
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
They are used to sync between rings, while fences
sync between a ring and the cpu.
v2 Fix radeon_semaphore_driver_fini when no semaphore were
allocated.
v3 Initialize list early on to avoid issue in case or early
error
Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Leave the common code in radeon_encoders.c and move the atom
specific code to atombios_encoders.c. This matches legacy
encoder setup and crtc setup.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reg header files are generated so they are not cleaned automagically.
They need to be added to the clean-files list.
Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cayman asics have 3 ring buffers:
ring 0 supports both gfx and compute
rings 1 and 2 are compute only
At the moment we only support ring 0.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
