Define platform devices for all audio devices found on S5PV210
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The pm-gpio.c code was incrementing the gpio_nr from the nr_gpios
field and the bank-bank offset inside the loop, and also in the
for() loop with a ++.
Remove the ++, as the number is already at the next GPIO, thus
ensuring that we don't skip a gpio bank by accident.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
As part of the cleanup, remove the old macros mapping GPIO numbers
to the base of the register now we have gpiolib to manage the GPIO
mappings for us.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Update a couple of S3C24XX and S3C2412 files that are still
using the GPIO number to register mapping calls to get the
s3c_gpio_chip and use the base field from that.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Start cleaning up the numbering of GPIO banks by removing the old
bank start definitions currently being used by some of the header
files.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Increase GPIOs number for S3C244X, and make S3C_GPIO_END
point to BANKJ end, otherwise gpiolib refuses to register
BANKJ
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
[ben-linux@fluff.org: Move pm fix to new patch]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Move the S3C_FB_MAX_WIN to the platform data to avoid
having to include the registers with the platform data.
Set S3C_FB_MAX_WIN to 5, which is the maximum that any
of the current hardware can do and the cost of having
it set to this for all is minimal (at least for the
platform data case), then always leave this as the maximum
for the systems supported.
Also remove the inclusion of <mach/regs-fb.h> from
the device definition in arch/arm/plat-samsung
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Fix the definition of the LCD clock bit, it is the TFT display
controller on bit 9, not the older STN on bit 10.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This adds the xusbxti clock to S3C64XX platform.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Now that the node 0 initialization code has been overhauled, kill off the
now obsolete setup_memory() bits.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Samsung's Soc S5PV210 has three PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the other two meant for data
transfer with peripherals.
Define and add latter two PL330 DMACs as platform devices on the
S5PV210 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Samsung's Soc S5P6442 has two PL330 DMACs. First is dedicated for
Memory->Memory data transfer while the second is meant for data
transfer with peripherals.
Define and add the peripheral PL330 DMAC as platform device on the
S5P6442 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Samsung's Soc S5P6440 has one PL330 DMAC.
Define and add the PL330 DMAC as platform device on the
S5P6440 platform.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Latest Samsung SoCs have one or more PL330 as their DMACs. This patch
implements the S3C DMA API for PL330 core driver.
The design has been kept as generic as possible while keeping effort to
add support for new SoCs to the minimum possible level.
Some of the salient features of this driver are:-
o Automatic scheduling of client requests onto DMAC if more than
one DMAC can reach the peripheral. Factors, such as current load
and number of exclusive but inactive peripherals that are
supported by the DMAC, are used to decide suitability of a DMAC
for a particular client.
o CIRCULAR buffer option is supported.
o The driver scales transparently with the number of DMACs and total
peripherals in the platform, since all peripherals are added to
the peripheral pool and DMACs to the controller pool.
For most conservative use of memory, smallest driver size and best
performance, we don't employ legacy data structures of the S3C DMA API.
That should not have any affect since those data structures are completely
invisible to the DMA clients.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch moves RTC device definitions from mach-s3c64xx
to plat-samsung, to enable the other SoCs to use same device
definition.
Signed-off-by: Atul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This is needed to fix up the build at the moment. Gradually this will be
reworked to follow the 32-bit initialization path and deal with delayed
VBR initialization.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The reserve_crashkernel() definition is in asm/kexec.h which is only
dragged in via linux/kexec.h if CONFIG_KEXEC is set. Just switch over to
asm/kexec.h unconditionally to fix up the build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
The member "clock" of struct "sja1000_platform_data" is documented as
"CAN bus oscillator frequency in Hz" but it's actually used as the CAN
clock frequency, which is half of it. To avoid further confusion, this
patch fixes it by renaming the member to "osc_freq". That way, also
non mainline users will notice the change. The platform code for the
relevant boards is updated accordingly. Furthermore, pre-defined
values are now used for the members "ocr" and "cdr".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch moves ADC device definition to plat-samsung.
Because that is generic to the S3C64XX and S5P Series SoCs.
Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Seems like a typo, wrong setup leads to broken image on ipaq screen.
Signed-off-by: Mike Solovyev <ms@sk.2-ch.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Use a 32-bit popcnt instruction for __arch_hweight32(), even on
x86-64. Even though the input register will *usually* be
zero-extended due to the standard operation of the hardware, it isn't
necessarily so if the input value was the result of truncating a
64-bit operation.
Note: the POPCNT32 variant used on x86-64 has a technically
unnecessary REX prefix to make it five bytes long, the same as a CALL
instruction, therefore avoiding an unnecessary NOP.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <alpine.LFD.2.00.1005171443060.4195@i5.linux-foundation.org>
As explained in commit 1c0fe6e3bd, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
[Geert] Kill 2 introduced compiler warnings
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
linux-next:
fs/udf/balloc.c: In function 'udf_bitmap_new_block':
fs/udf/balloc.c:274: error: implicit declaration of function 'generic_find_next_le_bit'
Convert ext2_find_next_{zero_,}bit() into generic_find_next_{zero_,}le_bit(),
and wrap the ext2_find_next_{zero_,}bit() around the latter.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
arch/m68k/hp300/time.h:2: WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
m68k does not support SMP. The access to the rtc is already serialized
with local_irq_save/restore which is sufficient on UP.
The open() protection in arch/m68k/mvme16x/rtc.c is not pretty but
sufficient on UP and safe w/o the BKL.
open() in arch/m68k/bvme6000/rtc.c can do with the same atomic logic
as arch/m68k/mvme16x/rtc.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
(At the moment the "SB700 Family Product Errata" document is available
at http://support.amd.com/us/Embedded_TechDocs/46837.pdf)
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100517164324.GB10254@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
The ARCH_REQUIRE_GPIOLIB config option will select GPIOLIB which
in turn will select GENERIC_GPIO. Because of this, there is no
reason to do the select GENERIC_GPIO in arch/arm/Kconfig for the
architectures that have ARCH_REQUIRE_GPIOLIB.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
In preparation for removing volatile from the atomic_t definition, this
patch adds a volatile cast to all the atomic read functions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a reworking of an original patch posted by Aaro Koskinen:
oprofile does not work with PM, because sysdev_suspend() is done with
interrupts disabled and oprofile needs a mutex. Implementing oprofile
as a platform device solves this problem.
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable hardware perf-events if CPU_HAS_PMU and select
HAVE_OPROFILE if HAVE_PERF_EVENTS. If no hardware support
is present, OProfile will fall back to timer mode.
This patch also removes the old OProfile drivers in favour
of the code implemented by perf.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
There are currently two hardware performance monitoring subsystems in
the kernel for ARM: OProfile and perf-events. This creates the
following problems:
1.) Duplicate PMU accessor code. Inevitable code drift may lead to
bugs in one framework that are fixed in the other.
2.) Locking issues. OProfile doesn't reprogram hardware counters
between profiling runs if the events to be monitored have not been
changed. This means that other profiling frameworks cannot use the
counters if OProfile is in use.
3.) Due to differences in the two frameworks, it may not be possible to
compare the results obtained by OProfile with those obtained by perf.
This patch removes the OProfile PMU driver code and replaces it with
calls to perf, therefore solving the issues mentioned above.
The only userspace-visible change is the lack of SCU counter support
for 11MPCore. This is currently unsupported by OProfile userspace tools anyway and therefore shouldn't cause any problems.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Jamie Iles <jamie.iles@picochip.com>
Cc: Jean Pihet <jpihet@mvista.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
For OProfile to initialise oprofilefs correctly, it needs to know
the number of counters it can represent.
This patch adds a function to the ARM perf-events backend to return
the number of hardware counters available for the current PMU.
Cc: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The perf-events framework for ARM only supports v6 and v7 cores.
This patch adds support for xscale v1 and v2 PMUs to perf, based on the
OProfile drivers in arch/arm/oprofile/op_model_xscale.c
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARM perf-events framework provides support for a number of different
PMUs using struct arm_pmu. The char *name field of this struct can be
used to identify the PMU, but this is cumbersome if used outside of perf.
This patch replaces the name string for a PMU with an enum, which holds
a unique ID for the PMU being represented. This ID can be used to index
an array of names within perf, so no functionality is lost. The presence
of the ID field, allows other kernel subsystems [currently oprofile] to
use their own mappings for the PMU name.
Cc: Jean Pihet <jpihet@mvista.com>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The current PMU infrastructure for ARM requires that the IRQs for the PMU
device are fixed at compile time and are selected based on the ARCH_ or MACH_ flags. This has the disadvantage of tying the Kernel down to a
particular board as far as profiling is concerned.
This patch replaces the compile-time IRQ registration with a runtime mechanism which allows the IRQs to be registered with the framework as
a platform_device.
A further advantage of this change is that there is scope for registering
different types of performance counters in the future by changing the id
of the platform_device and attaching different resources to it.
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Provide a configuration option to allow the ARMv6 to use normal
bufferable memory for coherent DMA. This option is forced to 'y'
for ARMv7, and offered as a configuration option on ARMv6.
Enabling this option requires drivers to have the necessary barriers
to ensure that data in DMA coherent memory is visible prior to the
DMA operation commencing.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The exception-trace facility on x86 and other architectures prints
traces to dmesg whenever a user space application crashes.
s390 has such a feature since ages however it is called
userprocess_debug and is enabled differently.
This patch makes sure that whenever one of the two procfs files
/proc/sys/kernel/userprocess_debug
/proc/sys/debug/exception-trace
is modified the contents of the second one changes as well.
That way we keep backwards compatibilty but also support the same
interface like other architectures do.
Besides that the output of the traces is improved since it will now
also contain the corresponding filename of the vma (when available)
where the process caused a fault or trap.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In order to access the data of the hypfs diagnose calls from user
space also in binary form, this patch adds two new attributes in
debugfs:
* z/VM: s390_hypfs/d2fc_bin
* LPAR: s390_hypfs/d204_bin
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove qdio API wrappers used by qeth and replace them by calling the
appropriate functions directly.
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Report user space faults before calling do_exit, since do_exit does
not return and therefore we will never see the fault message on the
console.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Provide a topology_core_id define which makes sure that the contents of
/sys/devices/system/cpu/cpuX/topology/core_id
indeed do contain the core id and not always 0.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add missing vdso_install target to install the unstripped vdso images
into $(MODLIB)/vdso/. These files are helpful when containing
additional debugging information.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This is a check for CONFIG_64BIT inside a block that is only active when
CONFIG_64BIT is set. So the check is actually useless and potentially
irritating.
Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use nonseekable_open for a couple of s390 device drivers. This avoids
the use of default_llseek function which has a dependency on the BKL.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Copy the last breaking event address from the lowcore to a new
field in the thread_struct on each system entry. Add a new
ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset
REGSET_LAST_BREAK to query the last breaking event.
This is useful for debugging wild branches in user space code.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the SPP instruction to set a tag on entry to / exit of the virtual
machine context. This allows the cpu measurement facility to distinguish
the samples from the host and the different guests.
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
A machine check can interrupt the i/o and external interrupt handler
anytime. If the machine check occurs while the interrupt handler is
waking up from idle vtime_start_cpu can get executed a second time
and the int_clock / async_enter_timer values in the lowcore get
clobbered. This can confuse the cpu time accounting.
To fix this problem two changes are needed. First the machine check
handler has to use its own copies of int_clock and async_enter_timer,
named mcck_clock and mcck_enter_timer. Second the nested execution
of vtime_start_cpu has to be prevented. This is done in s390_idle_check
by checking the wait bit in the program status word.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The system call path in entry[64].S is run with interrupts enabled.
Remove the irq tracing check from the system call exit code. If a
program check interrupted a context enabled for interrupts do a
call to trace_irq_off_caller in the program check handler before
branching to the system call exit code.
Restructure the system call and io interrupt return code to avoid
avoid the lpsw[e] to disable machine checks.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cleanup the #ifdef mess at io_work in entry[64].S and streamline the
TIF work code of the system call and io exit path.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
All other functions have the channel argument of type 'unsigned int'
the s3c2410_dma_devconfig also accept the same value as argument but
treat it as type 'int'. Remove this anomaly by make it 'unsigned int'.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Moorestown does not have BIOS provided MP tables, we can save some time
by avoiding scaning of these tables. e.g.
[ 0.000000] Scan SMP from c0000000 for 1024 bytes.
[ 0.000000] Scan SMP from c009fc00 for 1024 bytes.
[ 0.000000] Scan SMP from c00f0000 for 65536 bytes.
[ 0.000000] Scan SMP from c00bfff0 for 1024 bytes.
Searching EBDA with the base at 0x40E will also result in random pointer
deferencing within 1MB. This can be a problem in Lincroft if the pointer
hits VGA area and VGA mode is not enabled.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1273873281-17489-8-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Moorestown PCI code has special handling of devices with fixed BARs. In
case of BAR sizing writes, we need to update the fake PCI MMCFG space with real
size decode value.
When a BAR is not present, we need to return 0 instead of ~0. ~0 will be
treated as device error per bugzilla 12006.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
LKML-Reference: <1273873281-17489-2-git-send-email-jacob.jun.pan@linux.intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Add sclk clocks of type 'struct clksrc_clk' clock. The 'group2' of
clock clock sources is also added. This patch also changes the the
'id' member value of the uclk1 clock for instance instance 0 since
there are 4 instances of the uclk1 clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add the sclk_audio(0/1/2) clocks and sclk_spdif clock of type
'struct clksrc_clk' clock. Also, add clk_pcmcdclk(0/1/2) clocks
of type 'struct clk' clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Add sclk_dac, sclk_mixer and sclk_hdmi clocks. These clocks
are of type 'struct clksrc_clk' and so have a corresponding
clock list. These clocks are also added to the list of
clocks to be registered at boot time.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds the following system clocks.
1. clk_sclk_hdmiphy
2. clk_sclk_usbphy0
3. clk_sclk_usbphy1
4. sclk_dmc (dram memory controller clock)
5. sclk_onenand
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch adds the following.
1. Adds 'clk_sclk_hdmi27m' clock to represent the HDMI 27MHz clock.
2. Adds 'clk_vpllsrc; clock of type clksrc_clk to represent the
input clock for VPLL.
3. Adds 'clk_sclk_vpll' clock of type clksrc_clk to represent the
output of the MUX_VPLL mux.
4. Add clk_sclk_hdmi27m, clk_vpllsrc and clk_sclk_vpll to the list
of clocks to be registered.
5. Adds boot time print of 'clk_sclk_vpll' clock rate.
6. Adds 'clk_fout_vpll' clock to plat-s5p such that it is reusable
on other s5p platforms.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p83 clock, which is the PCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK PSYS clock.
This patch modifies the following.
1. Removes definitions and usage of 'clk_p66' clock.
2. Adds 'clk_pclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replaces all usage of clk_p66 with clk_pclk_psys clock.
4. Adds clk_pclk_psys into list of clocks to be registered.
5. Removes the sys_clks array since it is no longer required.
Also the registration of clocks in sys_clks is also removed.
6. Remove the 'GET_DIV' as it is no longer required.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p83 clock, which is the PCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a clock divider). So this
patch replaces the 'struct clk' type clock to 'struct clksrc_clk'
type clock for the PCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p83' clock.
2. Adds 'clk_pclk_dsys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p83 with clk_pclk_dsys clock.
4. Adds clk_pclk_dsys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h100 clock represents the IMEM clock for the MSYS domain.
This clock rate of this clock is always half of the hclk_msys clock.
There is an issue when getting the clock rate of the clk_h100 clock
(clock get_rate hclk_h100 always returns clock rate that is equal to
the hclk_msys clock rate).
This patch modifies the following.
1. Moves the definition of the clk_h100 clock into the 'init_clocks'
list with the appropriate parent, ctrlbit, enable and ops fields.
2. The name of the clock is changed from 'clk_h100' to 'hclk_imem'
to represent more clearly that is represents the IMEM clock in
the MSYS domain.
3. The function to get the clock rate of the hclk_imem clock is added.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_p100 clock, which is the PCLK clock for MSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the PCLK MSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_p100' clock.
2. Adds 'clk_pclk_msys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_p100 with clk_pclk_msys clock.
4. Adds clk_pclk_msys into list of clocks to be registered.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h133 clock, which is the HCLK clock for PSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK PSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h133' clock.
2. Adds 'clk_hclk_psys' clock which is of type 'struct clksrc_clk'.
3. Replace all usage of clk_h133 with clk_hclk_psys clock.
4. Adds clk_hclk_psys into list of clocks to be registered.
5. Removes the clock rate calculation of hclk133 and replaces
it with code that derives the HCLK PSYS clock rate from
the clk_hclk_psys clock.
6. Modify printing of the system clock rates.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h166 clock, which is the HCLK clock for DSYS domain, is of
type 'struct clk' whereas on S5PV210, this clock is suitable to be
of type clksrc_clk clock (since it has a choice of clock source
and a pre-divider). So this patch replaces the 'struct clk' type
clock to 'struct clksrc_clk' type clock for the HCLK DSYS clock.
This patch modifies the following.
1. Remove definitions and usage of 'clk_h166' clock.
2. Adds 'clk_sclk_a2m' clock which is one of possible parent clock
sources for the DSYS HCLK clock.
3. Adds 'clk_hclk_dsys' clock which is of type 'struct clksrc_clk'.
4. Replace all usage of clk_h166 with clk_hclk_dsys clock.
5. Adds clk_sclk_a2m and clk_hclk_dsys into list of clocks to
be registered.
6. Removes the clock rate calculation of hclk166 and replaces
it with code that derives the HCLK DSYS clock rate from
the clk_hclk_dsys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The clk_h200 represents the HCLK for the MSYS domain. This clock
is of type 'struct clk' but on V210, it is more suitable to be of
type 'struct clksrc_clk' (since it is a divided version of the
armclk). The replacement clock is renamed as clk_hclk_msys to
indicate that it represents the HCLK for MSYS domain.
This patch modifies the following.
1. Removes the usage of the clk_h200 clock.
2. Adds the new clock 'clk_hclk_msys'.
3. Adds clk_hclk_msys to the list of sysclks to be registered.
4. Modifies the hclk_msys clock rate calculation procedure to
be based on the new clk_hclk_msys clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Adds arm clock 'clk_armclk' of type clksrc_clk clock type.
2. Adds arm clock to the list of system clocks 'sysclks' for
registering it along with other system clocks.
3. Modifies the armclk clock rate calculation procedure to be
based on the new clk_armclk clock.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The assignment of clock rates for fout apll/mpll/epll is moved further
up in the s5pv210_setup_clocks function because the subsequent patches
require the clock rate of fout clocks to be setup.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This patch modifies the following.
1. Registers the mout_apll clksrc_clk clock.
2. The mout_mpll and mout_epll clocks were registered as 'struct clk'
types and then their parents were setup using the s3c_set_clksrc
function. This patch reduces the two steps into one by registering
the mout_mpll and mout_epll clocks using the s3c_register_clksrc
function.
3. As per point 2 above, the init_parents array is no longer required.
So the mout clocks are now put together in a new array named 'sysclks'.
The sysclks array will list the system level clocks and more
clocks will be added to it in the subsequent patches.
4. The clks array is left empty because of the movement of mpll and epll
clocks into the sysclks array. It is not deleted since subsequent
patches will add clocks into this array.
Signed-off-by: Thomas Abraham <thomas.ab <at> samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim <at> samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The system clock definitions are currently defined below the
peripheral clock definitions in the V210 clock code. For the V210
clock updates that follow this patch, it is required that the
system clock definitions such as the mout_apll and mout_mpll be
defined prior to the device clock definitions. This patch
re-arranges the system clock defintions for the clock updates that
follow this patch.
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
The interrupt enable bit for the performance counters is in the Control
Register $24, not in the counter register.
loongson2_perfcount_handler(), we need to use
Reported-by: Xu Hengyang <hengyang@mail.ustc.edu.cn>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1198/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
The sys_ppoll() takes struct 'struct timespec'. This is different for the
N32 and N64 ABIs. Use the compat version to do the proper conversions.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register
are not currently writeable by the ctc1 instruction. In odd corner cases,
this can cause problems. For example, a case existed where a divide-by-zero
exception was generated by the FPU, and the signal handler attempted to
restore the FPU registers to their state before the exception occurred. In
this particular setup, writing the old value to the FCSR register would
cause another divide-by-zero exception to occur immediately. The solution
is to change the ctc1 instruction emulator code to allow the Cause bits of
the FCSR register to be writeable. This is the behaviour of the hardware
that the code is emulating.
This problem was found by Shane McDonald, but the credit for the fix goes
to Kevin Kissell. In Kevin's words:
I submit that the bug is indeed in that ctc_op: case of the emulator. The
Cause bits (17:12) are supposed to be writable by that instruction, but the
CTC1 emulation won't let them be updated by the instruction. I think that
actually if you just completely removed lines 387-388 [...] things would
work a good deal better. At least, it would be a more accurate emulation of
the architecturally defined FPU. If I wanted to be really, really pedantic
(which I sometimes do), I'd also protect the reserved bits that aren't
necessarily writable.
Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
To: anemo@mba.ocn.ne.jp
To: kevink@paralogos.com
To: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/1205/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
Between "clean D line..." and "invalidate I line" operations in
v7_coherent_user_range(), the memory page may get swapped out.
And the fault on "invalidate I line" could not be properly handled
causing the oops.
In ARMv6 "external abort on linefetch" replaced by "instruction cache
maintenance fault". Let's handle it as translation fault. It fixes the
issue.
I'm not sure if it's reasonable to check arch version in run-time.
Let's do it in compile time for now.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com>
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enabling CONFIG_USER_DEBUG allows NWFPE to complain about every FP
exception, which with some programs can cause the kernel message log
to fill with NWFPE debug, swamping out other messages.
This change allows NWFPE debugging to be configured at run time.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
PL330 is a configurable DMA controller PrimeCell device.
The register map of the device is well defined.
The configuration of a particular implementation can be
read from the six configuration registers CR0-4,Dn.
This patch implements a driver for the specification:-
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0424a/DDI0424A_dmac_pl330_r0p0_trm.pdf
The exported interface should be sufficient to implement
a driver for any DMA API.
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The L310 cache controller's interface is almost identical
to the L210. One major difference is that the PL310 can
have up to 16 ways.
This change uses the cache's part ID and the Associativity
bits in the AUX_CTRL register to determine the number of ways.
Also, this version prints out the CACHE_ID and AUX_CTRL registers.
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
These files include linux/bootmem.h without using anything from this
file; remove the unnecessary include.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Convert code away from ->read_proc/->write_proc interfaces. Switch to
proc_create()/proc_create_data() which makes addition of proc entries
reliable wrt NULL ->proc_fops, NULL ->data and so on.
Problem with ->read_proc et al is described here commit
786d7e1612 "Fix rmmod/read/write races in
/proc entries"
This patch is part of an effort to remove the old simple procfs PAGE_SIZE
buffer interface.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Jaswinder reported this #GP:
|
| Message from syslogd@ht at May 14 09:39:32 ...
| kernel:[ 314.908612] EIP: [<c100ccca>]
| x86_perf_event_set_period+0x19d/0x1b2 SS:ESP 0068:edac3d70
|
Ming has narrowed it down to a comparision issue
between arguments with different sizes and
signs. As result event index reached a wrong
value which in turn led to a GP fault.
At the same time it was found that p4_next_cntr
has broken logic and should return the counter
index only if it was not yet borrowed for
another event.
Reported-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Reported-by: Lin Ming <ming.m.lin@intel.com>
Bisected-by: Lin Ming <ming.m.lin@intel.com>
Tested-by: Jaswinder Singh Rajput <jaswinderlinux@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Peter Zijlstra <a.p.zijlstra@chello.nl>
CC: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100514190815.GG13509@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes
ARM: 6125/1: ARM TWD: move TWD registers to common header
ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled
ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP
ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops
ARM: 6106/1: Implement copy_to_user_page() for noMMU
ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
Do not blindly access extended configuration space unless we actively
know we're on a Moorestown platform. The fixed-size BAR capability
lives in the extended configuration space, and thus is not applicable
if the configuration space isn't appropriately sized.
This fixes booting certain VMware configurations with CONFIG_MRST=y.
Moorestown will add a fake PCI-X 266 capability to advertise the
presence of extended configuration space.
Reported-and-tested-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Jacob Pan <jacob.jun.pan@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
LKML-Reference: <AANLkTiltKUa3TrKR1M51eGw8FLNoQJSLT0k0_K5X3-OJ@mail.gmail.com>
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments
x86, k8: Fix build error when K8_NB is disabled
x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs
x86: Fix fake apicid to node mapping for numa emulation
K8_NB depends on PCI and when the last is disabled (allnoconfig) we fail
at the final linking stage due to missing exported num_k8_northbridges.
Add a header stub for that.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20100503183036.GJ26107@aftab>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org>
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0
clock. Arrange matching USB 2.0 clock by the clock name instead of the device.
(Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll
also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case
I won't have any device at all.)
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Fix module loading on system with WB cache
microblaze: export assembly functions used by modules
microblaze: Remove powerpc code from Microblaze port
microblaze: Remove compilation warnings in cache macro
microblaze: export assembly functions used by modules
microblaze: fix get_user/put_user side-effects
microblaze: re-enable interrupts before calling schedule
McBSP module in OMAP4 needs to be able to set its tx/rx threshold
and enable the transmitter/receiver when starting an audio stream.
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
In OMAP4, there is only one irq line for TX and RX paths. Use
the correct irq line to avoid errors at runtime.
Also, request irq line only once (instead of requesting for TX
and RX).
Signed-off-by: Jorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
The newer assemblers support the .cfi_sections directive so we can put
the CFI from .S files into the .debug_frame section that is preserved
in unstripped vmlinux and in separate debuginfo, rather than the
.eh_frame section that is now discarded by vmlinux.lds.S.
Signed-off-by: Roland McGrath <roland@redhat.com>
LKML-Reference: <20100514044303.A6FE7400BE@magilla.sf.frob.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Declare 'audio-bus' clock for IISv4 controller of S3C6410.
Even though the name is same as that for IISv3, the id is
set to -1(just one instance of the controller is available)
which helps always fetch the correct clock.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Declare possible sources of CLKAUDIO[2]/audio-bus for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Declare the source of clock provided at Xi2sCDCLK2 pin for IISv4 controller.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
If host CPU is exposed to a guest the OSVW MSRs are not guaranteed
to be present and a GP fault occurs. Thus checking the feature flag is
essential.
Cc: <stable@kernel.org> # .32.x .33.x
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100427101348.GC4489@alberich.amd.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Enables basic boot support for the MSM7x30 SURF development
board.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The MSM7x30 does not have a separate bank of memory for shared
memory communication with the radio CPU. Set the kernel base
address 2MB in, to use this first 2MB for this purpose.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The MSM SOC's DMA controller contains several security domains.
On the MSM7x00, only security domain 3 is accessible to our CPU.
The 7x30, however, uses security domain 2. Fix up the register
definition macros to select this appropriately, based on
configured target.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
This adds a clock list, and common resource structures
for MSM7x30.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add a header describing the io regions for MSM7x30.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Enable CONFIG_ARCH_QSD8X50. This is the first SOC with the
Scorpion processor.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Support different RAM base addresses used by Qualcomm SOCs, with
QSD8x50 as the first addtional one.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
This adds a clock list, and common resource structures
for QSD8x50.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add a header describing the io regions for QSD8x50.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Some SoC need to redefine MSM_DGT_BASE from it's default.
This allows it to be defined in a header to override the
default value.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
GPIO support for Qualcomm SOCs requires interaction with the
radio (baseband processor). This API allows the different boards
to enable GPIO through the radio processor in a generic way.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
The 'PCOM' method of clock control (commands issued to the radio
CPU) is shared across several (but not all) Qualcomm SOCs.
Generalize this clock mechanism so these other SOCs can be added.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Scorpion-based SOCs from Qualcomm use a different interrupt
controller 'sirc'.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
msm_iomap.h is specific to the MSM7x00 series devices. Generalize
this in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
irqs.h is specific to the MSM7x00 series devices. Generalize
this in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
devices.c is specific to the MSM7x00 series of SOCs. Rename
appropriately in preparation to support more devices.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
More complete AEMIF support for boards.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Added PINMUX configurations for the CLKOUT0 .. CLKOUT2
functions, for boards that want to use these clocks.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Board code may want to use them.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch allows for a more flexible ioremap() interception based on iotable
contents.
With this patch, the ioremap() interception code can properly translate
addresses only after davinci_soc_info has been initialized. Consequently,
in soc-specific init functions, davinci_common_init() has to happen before any
ioremap() attempts. The da8xx init sequence has been suitably modified to meet
this restriction.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This patch modifies the pinmux implementation so as to ioremap() the pinmux
register area on first use.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
