As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----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=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
The updates this time are a bit smaller than most times, mainly because
it is not totally dominated by new Qualcomm hardware support. Instead,
we larger than average updates for Rockchips, NXP, Allwinner and TI.
The only two new SoCs this time are both from NXP and are minor variants
of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console
and a few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines.
-----BEGIN PGP SIGNATURE-----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=SnV4
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
The BPF atomic operations with the BPF_FETCH modifier along with
BPF_XCHG and BPF_CMPXCHG are fully ordered but the RISC-V JIT implements
all atomic operations except BPF_CMPXCHG with relaxed ordering.
Section 8.1 of the "The RISC-V Instruction Set Manual Volume I:
Unprivileged ISA" [1], titled, "Specifying Ordering of Atomic
Instructions" says:
| To provide more efficient support for release consistency [5], each
| atomic instruction has two bits, aq and rl, used to specify additional
| memory ordering constraints as viewed by other RISC-V harts.
and
| If only the aq bit is set, the atomic memory operation is treated as
| an acquire access.
| If only the rl bit is set, the atomic memory operation is treated as a
| release access.
|
| If both the aq and rl bits are set, the atomic memory operation is
| sequentially consistent.
Fix this by setting both aq and rl bits as 1 for operations with
BPF_FETCH and BPF_XCHG.
[1] https://riscv.org/wp-content/uploads/2017/05/riscv-spec-v2.2.pdf
Fixes: dd642ccb45 ("riscv, bpf: Implement more atomic operations for RV64")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20240505201633.123115-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Inline the calls to bpf_get_smp_processor_id() in the riscv bpf jit.
RISCV saves the pointer to the CPU's task_struct in the TP (thread
pointer) register. This makes it trivial to get the CPU's processor id.
As thread_info is the first member of task_struct, we can read the
processor id from TP + offsetof(struct thread_info, cpu).
RISCV64 JIT output for `call bpf_get_smp_processor_id`
======================================================
Before After
-------- -------
auipc t1,0x848c ld a5,32(tp)
jalr 604(t1)
mv a5,a0
Benchmark using [1] on Qemu.
./benchs/run_bench_trigger.sh glob-arr-inc arr-inc hash-inc
+---------------+------------------+------------------+--------------+
| Name | Before | After | % change |
|---------------+------------------+------------------+--------------|
| glob-arr-inc | 1.077 ± 0.006M/s | 1.336 ± 0.010M/s | + 24.04% |
| arr-inc | 1.078 ± 0.002M/s | 1.332 ± 0.015M/s | + 23.56% |
| hash-inc | 0.494 ± 0.004M/s | 0.653 ± 0.001M/s | + 32.18% |
+---------------+------------------+------------------+--------------+
NOTE: This benchmark includes changes from this patch and the previous
patch that implemented the per-cpu insn.
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support an instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF
JITs.
RISC-V uses generic per-cpu implementation where the offsets for CPUs
are kept in an array called __per_cpu_offset[cpu_number]. RISCV stores
the address of the task_struct in TP register. The first element in
task_struct is struct thread_info, and we can get the cpu number by
reading from the TP register + offsetof(struct thread_info, cpu).
Once we have the cpu number in a register we read the offset for that
cpu from address: &__per_cpu_offset + cpu_number << 3. Then we add this
offset to the destination register.
To measure the improvement from this change, the benchmark in [1] was
used on Qemu:
Before:
glob-arr-inc : 1.127 ± 0.013M/s
arr-inc : 1.121 ± 0.004M/s
hash-inc : 0.681 ± 0.052M/s
After:
glob-arr-inc : 1.138 ± 0.011M/s
arr-inc : 1.366 ± 0.006M/s
hash-inc : 0.676 ± 0.001M/s
[1] https://github.com/anakryiko/linux/commit/8dec900975ef
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240502151854.9810-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kbuild conventionally uses $(obj)/ for generated files, and $(src)/ for
checked-in source files. It is merely a convention without any functional
difference. In fact, $(obj) and $(src) are exactly the same, as defined
in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does
not accurately reflect the source directory location. While Kbuild
resolves this discrepancy by specifying VPATH=$(srctree) to search for
source files, it does not cover all cases. For example, when adding a
header search path for local headers, -I$(srctree)/$(src) is typically
passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles
because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of
$(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following
meanings:
$(obj) - directory in the object tree
$(src) - directory in the source tree (changed by this commit)
$(objtree) - the top of the kernel object tree
$(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced
with $(src).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Microchip:
A simple addition of a power-monitor on the Icicle dev board, as the
binding for it is now in mainline.
StarFive:
Support for the Milk-V Mars. This board is incredibly similar to the
VisionFive v2 that is already supported, with only the really ethernet
configuration being slightly different. Emil requested that a common
dtsi file, so my fixes branch is pulled into for-next to avoid an
annoying conflict between moved content and some erroneously added
nodes that were removed as fixes this cycle.
T-Head:
Re-ordering of some nodes to match the DTS coding style on the th1520.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZjvZxQAKCRB4tDGHoIJi
0rt/AQDBIGqrvMfTFUM4Rs8FznDpMffDR5DR4h+zrTbT5XR1LwEAnFnDuMTGufFT
xmfgB9+kbOCPpMyBSyu8NB7wUF47qgI=
=Vcbm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Yem+
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.10-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt-late
RISC-V Devicetrees for v6.10
Microchip:
A simple addition of a power-monitor on the Icicle dev board, as the
binding for it is now in mainline.
StarFive:
Support for the Milk-V Mars. This board is incredibly similar to the
VisionFive v2 that is already supported, with only the really ethernet
configuration being slightly different. Emil requested that a common
dtsi file, so my fixes branch is pulled into for-next to avoid an
annoying conflict between moved content and some erroneously added
nodes that were removed as fixes this cycle.
T-Head:
Re-ordering of some nodes to match the DTS coding style on the th1520.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.10-take2' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
riscv: dts: starfive: add Milkv Mars board device tree
riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards
riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard
riscv: dts: starfive: visionfive 2: add tf cd-gpios
riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
riscv: dts: starfive: visionfive 2: update sound and codec dt node name
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardware
riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware
riscv: dts: starfive: Remove PMIC interrupt info for Visionfive 2 board
Link: https://lore.kernel.org/r/20240508-crafter-cement-4f54e4182270@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The binding for this landed in v6.9, add the description. In the
off-chance that there were people carrying local patches for this based
on the driver shipped on the Microchip website (or vendor kernel) both
the binding and sysfs filenames changed during upstreaming.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:
- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI
I fixed up some nits Emil pointed out. This merges fixes into for-next
to avoid messing around with some nodes that were removed as fixes this
cycle.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
According to the device tree coding style, nodes shall be ordered by
unit address in ascending order.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZjUIHwAKCRB4tDGHoIJi
0r8RAQD+B5rJde/sQuQlmkJGrmZfyE/6/I1ZFxv0/xHhRPNWRAD/RFTTDthL/7c4
frMGl/nWSD3fvGmXrQ7Dp6wc1APIdQI=
=BWHh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QGOJ
-----END PGP SIGNATURE-----
Merge tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers
RISC-V SoC Kconfig Updates for v6.10
A few different bits of SoC-related Kconfig work. The first part of
this is shared with the DT updates - the modification of all SOC_CANAAN
users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away
from the k230 that is able to be used in a "common" kernel.
The other thing here is the removal of most of the SOC_VENDOR options,
with their ARCH_VENDOR equivalents that've been waiting in the wings for
1 year+ now made visible. Due a lapse on my part when originally adding
the ARCH_VENDOR stuff, the Microchip transition isn't complete - the
_POLARFIRE was a mistake to keep as there's gonna be non-PolarFire
RISC-V stuff from Microchip soonTM.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: config: enable ARCH_CANAAN in defconfig
RISC-V: drop SOC_VIRT for ARCH_VIRT
RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE
RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP
RISC-V: Drop unused SOC_CANAAN
reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210
soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210
riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210
Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_BASE_FULL is equivalent to !CONFIG_BASE_SMALL and is enabled by
default: CONFIG_BASE_SMALL is the special case to take care of.
So, remove CONFIG_BASE_FULL and move the config choice to
CONFIG_BASE_SMALL (which defaults to 'n')
For defconfigs explicitely disabling BASE_FULL, explicitely enable
BASE_SMALL.
For defconfigs explicitely enabling BASE_FULL, drop it as it is the
default.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240505080343.1471198-4-yoann.congal@smile.fr
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Relatively calm week, likely due to public holiday in most places.
No known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=f6KY
-----END PGP SIGNATURE-----
Merge tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
Sophgo:
Added sdhci support for cv18xx/duo.
Added clock support for cv18xx.
Added clock for uart/sdhci.
Added spi support for cv18xx.
Added i2c support for cv18xx.
Added reserved memory node for cv1800b/duo.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
-----BEGIN PGP SIGNATURE-----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=d7SS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=5D+b
-----END PGP SIGNATURE-----
Merge tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux into soc/dt
RISC-V Devicetrees for v6.10
Sophgo:
Added sdhci support for cv18xx/duo.
Added clock support for cv18xx.
Added clock for uart/sdhci.
Added spi support for cv18xx.
Added i2c support for cv18xx.
Added reserved memory node for cv1800b/duo.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.10' of https://github.com/sophgo/linux:
riscv: dts: sophgo: add reserved memory node for CV1800B
riscv: dts: sophgo: use real clock for sdhci
riscv: dts: sophgo: cv18xx: Add i2c devices
riscv: dts: sophgo: cv18xx: Add spi devices
riscv: dts: sophgo: add uart clock for Sophgo CV1800 series SoC
riscv: dts: sophgo: add clock generator for Sophgo CV1800 series SoC
riscv: dts: sophgo: add sdcard support for milkv duo
Link: https://lore.kernel.org/r/MA0P287MB2822CA2DE757787D6EA3B1F8FE192@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is to prepare for Milkv Mars board dts support in the following
patch. Let's factored out common part into .dtsi.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
No physical write-protect line is present, so setting "disable-wp".
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Per VisionFive 2 1.2B, and 1.3A boards' SCH, GPIO 41 is used as
card detect. So add "cd-gpios" property for this.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
As pointed out by Krzysztof "Board should not bring new CPU nodes.
Override by label instead."
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Use "audio-codec" as the codec dt node name, and "sound" as the simple
audio card dt name.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add the 'cpus' label so that we can reference it in board dts files.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Samuel Holland <samuel.holland@sifive.com> says:
This series converts uniprocessor kernel builds to use the same TLB
flushing code as SMP builds, to take advantage of batching and existing
range- and ASID-based TLB flush optimizations. It optimizes out IPIs and
SBI calls based on the online CPU count, which also covers the scenario
where SMP was enabled at build time but only one CPU is present/online.
A final optimization is to use single-ASID flushes wherever possible, to
avoid unnecessary TLB misses for kernel mappings.
This series has a semantic conflict with the AIA patches that are in
linux-next due to the removal of the third parameter of
riscv_ipi_set_virq_range(), which is called from imsic_ipi_domain_init()
in drivers/irqchip/irq-riscv-imsic-early.c. The resolution is to remove
the extra argument from the call site.
Here are some numbers from D1 which show the performance impact:
v6.9-rc1:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 198.5 46.2
File Copy 1024 bufsize 2000 maxblocks 3960.0 73934.4 186.7
File Copy 256 bufsize 500 maxblocks 1655.0 20242.6 122.3
File Copy 4096 bufsize 8000 maxblocks 5800.0 197706.4 340.9
Pipe Throughput 12440.0 176974.2 142.3
Pipe-based Context Switching 4000.0 23626.8 59.1
Process Creation 126.0 449.9 35.7
Shell Scripts (1 concurrent) 42.4 544.4 128.4
Shell Scripts (16 concurrent) --- 35.3 ---
Shell Scripts (8 concurrent) 6.0 71.6 119.3
System Call Overhead 15000.0 248072.6 165.4
========
System Benchmarks Index Score (Partial Only) 110.6
v6.9-rc1 + this patch series:
System Benchmarks Partial Index BASELINE RESULT INDEX
Execl Throughput 43.0 196.8 45.8
File Copy 1024 bufsize 2000 maxblocks 3960.0 71782.2 181.3
File Copy 256 bufsize 500 maxblocks 1655.0 21269.4 128.5
File Copy 4096 bufsize 8000 maxblocks 5800.0 199424.0 343.8
Pipe Throughput 12440.0 196468.6 157.9
Pipe-based Context Switching 4000.0 24261.8 60.7
Process Creation 126.0 459.0 36.4
Shell Scripts (1 concurrent) 42.4 543.8 128.2
Shell Scripts (16 concurrent) --- 35.5 ---
Shell Scripts (8 concurrent) 6.0 71.7 119.6
System Call Overhead 15000.0 259415.2 172.9
========
System Benchmarks Index Score (Partial Only) 113.0
* b4-shazam-lts:
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
Link: https://lore.kernel.org/r/20240327045035.368512-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, riscv linux requires at least IMA, so all platforms have a
multiplier. And I assume the 'mul' efficiency is comparable or better
than a sequence of five or so register-dependent arithmetic
instructions. Select ARCH_HAS_FAST_MULTIPLIER to get slightly nicer
codegen. Refer to commit f9b4192923 ("[PATCH] bitops: hweight()
speedup") for more details.
In a simple benchmark test calling hweight64() in a loop, it got:
about 14% performance improvement on JH7110, tested on Milkv Mars.
about 23% performance improvement on TH1520 and SG2042, tested on
Sipeed LPI4A and SG2042 platform.
a slight performance drop on CV1800B, tested on milkv duo. Among all
riscv platforms in my hands, this is the only one which sees a slight
performance drop. It means the 'mul' isn't quick enough. However, the
situation exists on x86 too, for example, P4 doesn't have fast
integer multiplies as said in the above commit, x86 also selects
ARCH_HAS_FAST_MULTIPLIER. So let's select ARCH_HAS_FAST_MULTIPLIER
which can benefit almost riscv platforms.
Samuel also provided some performance numbers:
On Unmatched: 20% speedup for __sw_hweight32 and 30% speedup for
__sw_hweight64.
On D1: 8% speedup for __sw_hweight32 and 8% slowdown for
__sw_hweight64.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240325105823.1483-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Jisheng Zhang <jszhang@kernel.org> says:
This series selects ARCH_USE_CMPXCHG_LOCKREF to enable the
cmpxchg-based lockless lockref implementation for riscv. Then,
implement arch_cmpxchg64_{relaxed|acquire|release}.
After patch1:
Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.
After patch2:
on both TH1520 and JH7110 platforms, I didn't see obvious
performance improvement with Linus' test case [1]. IMHO, this may
be related with the fence and lr.d/sc.d hw implementations. In theory,
lr/sc without fence could give performance improvement over lr/sc plus
fence, so add the code here to leave performance improvement room on
newer HW platforms.
* b4-shazam-merge:
riscv: cmpxchg: implement arch_cmpxchg64_{relaxed|acquire|release}
riscv: select ARCH_USE_CMPXCHG_LOCKREF
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Link: https://lore.kernel.org/r/20240325111038.1700-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
After commit f51f7a0fc2 ("riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC
for !dma_coherent"), for non-coherent platforms with less than 4GB
memory, we rely on users to pass "swiotlb=mmnn,force" kernel parameters
to enable DMA bouncing for unaligned kmalloc() buffers. Now let's go
further: If no bouncing needed for ZONE_DMA, let kernel automatically
allocate 1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing on
non-coherent platforms, so that no need to pass "swiotlb=mmnn,force"
any more.
The math of "1MB swiotlb buffer per 1GB of RAM for kmalloc() bouncing"
is taken from arm64. Users can still force smaller swiotlb buffer by
passing "swiotlb=mmnn".
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240325110036.1564-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pgtable_l{4,5}_enabled are read only after initialization, make explicit
annotation of __ro_after_init on them.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240320064712.442579-3-dawei.li@shingroup.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
IS_ENABLED(CONFIG_64BIT) in initialization of pgtable_l{4,5}_enabled is
redundant, remove it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240320064712.442579-2-dawei.li@shingroup.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Charlie Jenkins <charlie@rivosinc.com> says:
Improve the performance of icache flushing by creating a new prctl flag
PR_RISCV_SET_ICACHE_FLUSH_CTX. The interface is left generic to allow
for future expansions such as with the proposed J extension [1].
Documentation is also provided to explain the use case.
Patch sent to add PR_RISCV_SET_ICACHE_FLUSH_CTX to man-pages [2].
[1] https://github.com/riscv/riscv-j-extension
[2] https://lore.kernel.org/linux-man/20240124-fencei_prctl-v1-1-0bddafcef331@rivosinc.com
* b4-shazam-merge:
cpumask: Add assign cpu
documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl
riscv: Include riscv_set_icache_flush_ctx prctl
riscv: Remove unnecessary irqflags processor.h include
Link: https://lore.kernel.org/r/20240312-fencei-v13-0-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti <alexghiti@rivosinc.com> says:
patch 1 removes a useless memory barrier and patch 2 actually fixes the
issue with IPI in the patching code.
* b4-shazam-merge:
riscv: Fix text patching when IPI are used
riscv: Remove superfluous smp_mb()
Link: https://lore.kernel.org/r/20240229121056.203419-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZi9+AAAKCRDbK58LschI
g0nEAP487m7L0nLVriC2oIOWsi29tklW3etm6DO7gmGRGIHgrgEAnMyV1xBj3bGj
v6jJwDcybCym1hLx+1x1JCZ4eoAFswE=
=xbna
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Even if multiple ASIDs are not supported, using the single-ASID variant
of the sfence.vma instruction preserves TLB entries for global (kernel)
pages. So it is always more efficient to use the single-ASID code path.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-14-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If the CPU does not support multiple ASIDs, all MM contexts use ASID 0.
In this case, it is still beneficial to flush the TLB by ASID, as the
single-ASID variant of the sfence.vma instruction preserves TLB entries
for global (kernel) pages.
This optimization is recommended by the RISC-V privileged specification:
If the implementation does not provide ASIDs, or software chooses
to always use ASID 0, then after every satp write, software should
execute SFENCE.VMA with rs1=x0. In the common case that no global
translations have been modified, rs2 should be set to a register
other than x0 but which contains the value zero, so that global
translations are not flushed.
It is not possible to apply this optimization when using the ASID
allocator, because that code must flush the TLB for all ASIDs at once
when incrementing the version number.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-13-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the size of the ASID field in the MM context ID dynamically
depends on the number of hardware-supported ASID bits. This requires
reading a global variable to extract either field from the context ID.
Instead, allocate the maximum possible number of bits to the ASID field,
so the layout of the context ID is known at compile-time.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-11-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When using the ASID allocator, the MM context ID contains two values:
the ASID in the lower bits, and the allocator version number in the
remaining bits. Use macros to make this separation more obvious.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-10-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implementations affected by SiFive errata CIP-1200 have a bug which
forces the kernel to always use the global variant of the sfence.vma
instruction. When affected by this errata, do not attempt to flush a
range of addresses; each iteration of the loop would actually flush the
whole TLB instead. Instead, minimize the overall number of sfence.vma
instructions.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240327045035.368512-9-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 3f1e782998 ("riscv: add ASID-based tlbflushing methods") added
calls to the sfence.vma instruction with rs2 != x0. These single-ASID
instruction variants are also affected by SiFive errata CIP-1200.
Until now, the errata workaround was not needed for the single-ASID
sfence.vma variants, because they were only used when the ASID allocator
was enabled, and the affected SiFive platforms do not support multiple
ASIDs. However, we are going to start using those sfence.vma variants
regardless of ASID support, so now we need alternatives covering them.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-8-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In SMP configurations, all TLB flushing narrower than flush_tlb_all()
goes through __flush_tlb_range(). Do the same in UP configurations.
This allows UP configurations to take advantage of recent improvements
to the code in tlbflush.c, such as support for huge pages and flushing
multiple-page ranges.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240327045035.368512-7-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If no other CPU is online, a local cache or TLB flush is sufficient.
These checks can be constant-folded when SMP is disabled.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-6-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
__flush_tlb_range() avoids broadcasting TLB flushes when an mm context
is only active on the local CPU. Apply this same optimization to TLB
flushes of kernel memory when only one CPU is online. This check can be
constant-folded when SMP is disabled.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
An IPI backend is always required in an SMP configuration, but an SBI
implementation is not. For example, SBI will be unavailable when the
kernel runs in M mode. For this reason, consider IPI delivery of cache
and TLB flushes to be the base case, and any other implementation (such
as the SBI remote fence extension) to be an optimization.
Generally, if IPIs can be delivered without firmware assistance, they
are assumed to be faster than SBI calls due to the SBI context switch
overhead. However, when SBI is used as the IPI backend, then the context
switch cost must be paid anyway, and performing the cache/TLB flush
directly in the SBI implementation is more efficient than injecting an
interrupt to S-mode. This is the only existing scenario where
riscv_ipi_set_virq_range() is called with use_for_rfence set to false.
sbi_ipi_init() already checks riscv_ipi_have_virq_range(), so it only
calls riscv_ipi_set_virq_range() when no other IPI device is available.
This allows moving the static key and dropping the use_for_rfence
parameter. This decouples the static key from the irqchip driver probe
order.
Furthermore, the static branch only makes sense when CONFIG_RISCV_SBI is
enabled. Optherwise, IPIs must be used. Add a fallback definition of
riscv_use_sbi_for_rfence() which handles this case and removes the need
to check CONFIG_RISCV_SBI elsewhere, such as in cacheflush.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The logic is the same for all page table levels. See commit 69be3fb111
("riscv: enable MMU_GATHER_RCU_TABLE_FREE for SMP && MMU").
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Instruction cache flush IPIs are sent only to CPUs in cpu_online_mask,
so they will not target a CPU until it calls set_cpu_online() earlier in
smp_callin(). As a result, if instruction memory is modified between the
CPU coming out of reset and that point, then its instruction cache may
contain stale data. Therefore, the instruction cache must be flushed
after the set_cpu_online() synchronization point.
Fixes: 08f051eda3 ("RISC-V: Flush I$ when making a dirty page executable")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Export the Zihintpause ISA extension through hwprobe which allows using
"pause" instructions. Some userspace applications (OpenJDK for
instance) uses this to handle some locking back-off.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240221083108.1235311-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While reworking code to fix sparse errors, it appears that the
RISCV_M_MODE specific could actually be removed and use the one for
normal mode. Even though RISCV_M_MODE can do direct user memory access,
using the user uaccess helpers is also going to work. Since there is no
need anymore for specific accessors (load_u8()/store_u8()), we can
directly use memcpy()/copy_{to/from}_user() and get rid of the copy
loop entirely. __read_insn() is also fixed to use an unsigned long
instead of a pointer which was cast in __user address space. The
insn_addr parameter is now cast from unsigned lnog to the correct
address space directly.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240206154104.896809-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
While the processor is executing kernel code, the value of the scratch
CSR is always zero, so there is no need to save the value. Continue to
write the CSR during the resume flow, so we do not rely on firmware to
initialize it.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240312195641.1830521-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Samuel Holland <samuel.holland@sifive.com> says:
This series aims to improve support for NOMMU, specifically by making it
easier to test NOMMU kernels in QEMU and on various widely-available
hardware (errata permitting). After all, everything supports Svbare...
After applying this series, a NOMMU kernel based on defconfig (changing
only the three options below*) boots to userspace on QEMU when passed as
-kernel.
# CONFIG_RISCV_M_MODE is not set
# CONFIG_MMU is not set
CONFIG_NONPORTABLE=y
*if you are using LLD, you must also disable BPF_SYSCALL and KALLSYMS,
because LLD bails on out-of-range references to undefined weak symbols.
* b4-shazam-merge:
riscv: Allow NOMMU kernels to run in S-mode
riscv: Remove MMU dependency from Zbb and Zicboz
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Link: https://lore.kernel.org/r/20240227003630.3634533-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The rust modules work on 64-bit RISC-V, with no twiddling required.
Select HAVE_RUST and provide the required flags to kbuild so that the
modules can be used. The Makefile and Kconfig changes are lifted from
work done by Miguel in the Rust-for-Linux tree, hence his authorship.
Following the rabbit hole, the Makefile changes originated in a script,
created based on config files originally added by Gary, hence his
co-authorship.
32-bit is broken in core rust code, so support is limited to 64-bit:
ld.lld: error: undefined symbol: __udivdi3
As 64-bit RISC-V is now supported, add it to the arch support table.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240409-silencer-book-ce1320f06aab@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Leonardo Bras <leobras@redhat.com> says:
While studying riscv's cmpxchg.h file, I got really interested in
understanding how RISCV asm implemented the different versions of
{cmp,}xchg.
When I understood the pattern, it made sense for me to remove the
duplications and create macros to make it easier to understand what exactly
changes between the versions: Instruction sufixes & barriers.
Also, did the same kind of work on atomic.c.
After that, I noted both cmpxchg and xchg only accept variables of
size 4 and 8, compared to x86 and arm64 which do 1,2,4,8.
Now that deduplication is done, it is quite direct to implement them
for variable sizes 1 and 2, so I did it. Then Guo Ren already presented
me some possible users :)
I did compare the generated asm on a test.c that contained usage for every
changed function, and could not detect any change on patches 1 + 2 + 3
compared with upstream.
Pathes 4 & 5 were compiled-tested, merged with guoren/qspinlock_v11 and
booted just fine with qemu -machine virt -append "qspinlock".
(tree: https://gitlab.com/LeoBras/linux/-/commits/guo_qspinlock_v11)
Latest tests happened based on this tree:
https://github.com/guoren83/linux/tree/qspinlock_v12
* b4-shazam-lts:
riscv/cmpxchg: Implement xchg for variables of size 1 and 2
riscv/cmpxchg: Implement cmpxchg for variables of size 1 and 2
riscv/atomic.h : Deduplicate arch_atomic.*
riscv/cmpxchg: Deduplicate cmpxchg() asm and macros
riscv/cmpxchg: Deduplicate xchg() asm functions
Link: https://lore.kernel.org/r/20240103163203.72768-2-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation.
* A fix to avoid loading rv64/NOMMU kernel past the start of RAM.
* A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask.
* The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V.
* A fix for a build warning in the perf tools on rv32.
* A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm.
* A pair of fixes for T-Head PBMT errata probing, which has been renamed
MAE by the vendor.
-----BEGIN PGP SIGNATURE-----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=LONm
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for TASK_SIZE on rv64/NOMMU, to reflect the lack of user/kernel
separation
- A fix to avoid loading rv64/NOMMU kernel past the start of RAM
- A fix for RISCV_HWPROBE_EXT_ZVFHMIN on ilp32 to avoid signed integer
overflow in the bitmask
- The sud_test kselftest has been fixed to properly swizzle the syscall
number into the return register, which are not the same on RISC-V
- A fix for a build warning in the perf tools on rv32
- A fix for the CBO selftests, to avoid non-constants leaking into the
inline asm
- A pair of fixes for T-Head PBMT errata probing, which has been
renamed MAE by the vendor
* tag 'riscv-for-linus-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: selftests: cbo: Ensure asm operands match constraints, take 2
perf riscv: Fix the warning due to the incompatible type
riscv: T-Head: Test availability bit before enabling MAE errata
riscv: thead: Rename T-Head PBMT to MAE
selftests: sud_test: return correct emulated syscall value on RISC-V
riscv: hwprobe: fix invalid sign extension for RISCV_HWPROBE_EXT_ZVFHMIN
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZiwdfQAKCRDbK58LschI
g1oqAP9mjayeIHCfYMQZa2eevy1PmVlgdNdFdMDWZFS/pHv9cgD/ZdmGzbUDKCAQ
Y/KiTajitZw3kxtHX45v8/Ugtlsh9Qg=
=Ewiw
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The dma_base, size and iommu arguments are only used by ARM, and can
now easily be deduced from the device itself, so there's no need to pass
them through the callchain as well.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com> # For Hyper-V
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/5291c2326eab405b1aa7693aa964e8d3cb7193de.1713523152.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Rename the function to indicate that it is meant for firmware
counter read. While at it, add a range sanity check for it as
well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-17-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The SBI v2.0 introduced a fw_read_hi function to read 64 bit firmware
counters for RV32 based systems.
Add infrastructure to support that.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-16-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM enables perf for guest via counter virtualization. However, the
sampling can not be supported as there is no mechanism to enabled
trap/emulate scountovf in ISA yet. Rely on the SBI PMU snapshot
to provide the counter overflow data via the shared memory.
In case of sampling event, the host first sets the guest's LCOFI
interrupt and injects to the guest via irq filtering mechanism defined
in AIA specification. Thus, ssaia must be enabled in the host in order
to use perf sampling in the guest. No other AIA dependency w.r.t kernel
is required.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-15-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
PMU Snapshot function allows to minimize the number of traps when the
guest access configures/access the hpmcounters. If the snapshot feature
is enabled, the hypervisor updates the shared memory with counter
data and state of overflown counters. The guest can just read the
shared memory instead of trap & emulate done by the hypervisor.
This patch doesn't implement the counter overflow yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-14-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, we return a linux error code if creating a perf event failed
in kvm. That shouldn't be necessary as guest can continue to operate
without perf profiling or profiling with firmware counters.
Return appropriate SBI error code to indicate that PMU configuration
failed. An error message in kvm already describes the reason for failure.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-13-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The virtual counter value is updated during pmu_ctr_read. There is no need
to update it in reset case. Otherwise, it will be counted twice which is
incorrect.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-12-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The initial sample period value when counter value is not assigned
should be set to maximum value supported by the counter width.
Otherwise, it may result in spurious interrupts.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240420151741.962500-11-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Nowadays, we call it "GUP-fast", the external interface includes functions
like "get_user_pages_fast()", and we renamed all internal functions to
reflect that as well.
Let's make the config option reflect that.
Link: https://lkml.kernel.org/r/20240402125516.223131-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The access_error() of vma already checked under per-VMA lock, if it is a
bad access, directly handle error, no need to retry with mmap_lock again.
Since the page faut is handled under per-VMA lock, count it as a vma lock
event with VMA_LOCK_SUCCESS.
[wangkefeng.wang@huawei.com: use `cause' rather than SIGSEGV, per Alexandre]
Link: https://lkml.kernel.org/r/ac978061-ce1a-40a4-8b0a-61883b42bea7@huawei.com
Link: https://lkml.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment in the code explains the reasons. We took a different
approach comparing to pmd_pfn() by providing a fallback function.
Another option is to provide some lower level config options (compare to
HUGETLB_PAGE or THP) to identify which layer an arch can support for such
huge mappings. However that can be an overkill.
[peterx@redhat.com: fix loongson defconfig]
Link: https://lkml.kernel.org/r/20240403013249.1418299-4-peterx@redhat.com
Link: https://lkml.kernel.org/r/20240327152332.950956-6-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
All implementations that aren't no-ops just set a bit in the flags, and we
want to use the folio flags rather than the page flags for that. Rename
it to arch_clear_hugetlb_flags() while we're touching it so nobody thinks
it's used for THP.
[willy@infradead.org: fix arm64 build]
Link: https://lkml.kernel.org/r/ZgQvNKGdlDkwhQEX@casper.infradead.org
Link: https://lkml.kernel.org/r/20240326171045.410737-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This API is not used anymore, drop it for the whole tree.
Link: https://lkml.kernel.org/r/20240318200404.448346-13-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <festevam@denx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
T-Head's memory attribute extension (XTheadMae) (non-compatible
equivalent of RVI's Svpbmt) is currently assumed for all T-Head harts.
However, QEMU recently decided to drop acceptance of guests that write
reserved bits in PTEs.
As XTheadMae uses reserved bits in PTEs and Linux applies the MAE errata
for all T-Head harts, this broke the Linux startup on QEMU emulations
of the C906 emulation.
This patch attempts to address this issue by testing the MAE-enable bit
in the th.sxstatus CSR. This CSR is available in HW and can be
emulated in QEMU.
This patch also makes the XTheadMae probing mechanism reliable, because
a test for the right combination of mvendorid, marchid, and mimpid
is not sufficient to enable MAE.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Link: https://lore.kernel.org/r/20240407213236.2121592-3-christoph.muellner@vrull.eu
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
After selecting ARCH_USE_CMPXCHG_LOCKREF, one straight futher
optimization is implementing the arch_cmpxchg64_relaxed() because the
lockref code does not need the cmpxchg to have barrier semantics. At
the same time, implement arch_cmpxchg64_acquire and
arch_cmpxchg64_release as well.
However, on both TH1520 and JH7110 platforms, I didn't see obvious
performance improvement with Linus' test case [1]. IMHO, this may
be related with the fence and lr.d/sc.d hw implementations. In theory,
lr/sc without fence could give performance improvement over lr/sc plus
fence, so add the code here to leave performance improvement room on
newer HW platforms.
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240325111038.1700-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Select ARCH_USE_CMPXCHG_LOCKREF to enable the cmpxchg-based lockless
lockref implementation for riscv.
Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240325111038.1700-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The current definition yields a negative 32bits signed value which
result in a mask with is obviously incorrect. Replace it by using a
1ULL bit shift value to obtain a single set bit mask.
Fixes: 5dadda5e6a ("riscv: hwprobe: export Zvfh[min] ISA extensions")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240409143839.558784-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Now that we have enabled IRQC support for RZ/Five SoC switch to interrupt
mode for ethernet0/1 PHYs instead of polling mode.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240403203503.634465-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per the SBI specification, minor version is encoded in the
lower 24 bits only. Make sure that the SBI version is computed
with the appropriate mask.
Currently, there is no minor version in use. Thus, it doesn't
change anything functionality but it is good to be compliant with
the specification.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-8-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI_STA_SHMEM_DISABLE is a macro to invoke disable shared memory
commands. As this can be invoked from other SBI extension context
as well, rename it to more generic name as SBI_SHMEM_DISABLE.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-7-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI PMU Snapshot function optimizes the number of traps to
higher privilege mode by leveraging a shared memory between the S/VS-mode
and the M/HS mode. Add the definitions for that extension and new error
codes.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-6-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
It is a good practice to use BIT() instead of (1 << x).
Replace the current usages with BIT().
Take this opportunity to replace few (1UL << x) with BIT() as well
for consistency.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-5-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI v2.0 added another function to SBI PMU extension to read
the upper bits of a counter with width larger than XLEN.
Add the definition for that function.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240420151741.962500-3-atishp@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Originally, the use of kvm->lock in SBI_EXT_HSM_HART_START also avoids
the simultaneous updates to the reset context of target VCPU. Since this
lock has been replace with vcpu->mp_state_lock, and this new lock also
protects the vcpu->mp_state. We have to add a separate lock for
vcpu->reset_cntx.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-3-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Documentation/virt/kvm/locking.rst advises that kvm->lock should be
acquired outside vcpu->mutex and kvm->srcu. However, when KVM/RISC-V
handling SBI_EXT_HSM_HART_START, the lock ordering is vcpu->mutex,
kvm->srcu then kvm->lock.
Although the lockdep checking no longer complains about this after commit
f0f44752f5 ("rcu: Annotate SRCU's update-side lockdep dependencies"),
it's necessary to replace kvm->lock with a new dedicated lock to ensure
only one hart can execute the SBI_EXT_HSM_HART_START call for the target
hart simultaneously.
Additionally, this patch also rename "power_off" to "mp_state" with two
possible values. The vcpu->mp_state_lock also protects the access of
vcpu->mp_state.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240417074528.16506-2-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icache flushing instructions such as fence.i with the guarantee
that the icache will continue to be clean after thread migration.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-2-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This include is not used and can lead to circular dependencies.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-1-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, we use stop_machine() to patch the text and when we use IPIs for
remote icache flushes (which is emitted in patch_text_nosync()), the system
hangs.
So instead, make sure every CPU executes the stop_machine() patching
function and emit a local icache flush there.
Co-developed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240229121056.203419-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This memory barrier is not needed and not documented so simply remove
it.
Suggested-by: Andrea Parri <andrea@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240229121056.203419-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When __bpf_prog_enter() returns zero, the s1 register is not set to zero,
resulting in incorrect runtime stats. Fix it by setting s1 immediately upon
the return of __bpf_prog_enter().
Fixes: 49b5e77ae3 ("riscv, bpf: Add bpf trampoline support for RV64")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240416064208.2919073-3-xukuohai@huaweicloud.com
This partially reverts
commit 92cfc35838 ("riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1")
This added device tree nodes for I2S hardware that is not actually on the
VisionFive 2 board, but connected on the 40pin header. Many different extension
boards could be added on those pins, so this should be handled by overlays
instead.
This also conflicts with the TDM node which also attempts to grab GPIO 44:
starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s
Fixes: 92cfc35838 ("riscv: dts: starfive: Add the nodes and pins of I2Srx/I2Stx0/I2Stx1")
Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This partially reverts
commit e7c304c034 ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
This added device tree nodes for TDM hardware that is not actually on the
VisionFive 2 board, but connected on the 40pin header. Many different extension
boards could be added on those pins, so this should be handled by overlays
instead.
This also conflicts with the I2S node which also attempts to grab GPIO 44:
starfive-jh7110-sys-pinctrl 13040000.pinctrl: pin GPIO44 already requested by 10090000.tdm; cannot claim for 120c0000.i2s
Fixes: e7c304c034 ("riscv: dts: starfive: jh7110: add the node and pins configuration for tdm")
Signed-off-by: Hannah Peuckmann <hannah.peuckmann@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
The .change_pte() MMU notifier callback was intended as an
optimization. The original point of it was that KSM could tell KVM to flip
its secondary PTE to a new location without having to first zap it. At
the time there was also an .invalidate_page() callback; both of them were
*not* bracketed by calls to mmu_notifier_invalidate_range_{start,end}(),
and .invalidate_page() also doubled as a fallback implementation of
.change_pte().
Later on, however, both callbacks were changed to occur within an
invalidate_range_start/end() block.
In the case of .change_pte(), commit 6bdb913f0a ("mm: wrap calls to
set_pte_at_notify with invalidate_range_start and invalidate_range_end",
2012-10-09) did so to remove the fallback from .invalidate_page() to
.change_pte() and allow sleepable .invalidate_page() hooks.
This however made KVM's usage of the .change_pte() callback completely
moot, because KVM unmaps the sPTEs during .invalidate_range_start()
and therefore .change_pte() has no hope of finding a sPTE to change.
Drop the generic KVM code that dispatches to kvm_set_spte_gfn(), as
well as all the architecture specific implementations.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anup Patel <anup@brainfault.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20240405115815.3226315-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
