fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Staging: silicom: Force depend on module until monolithic build fixed
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make some variables const:
1. bus oerations table
2. driver name
3. tpci control register table
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Silicom Bypass Network Interface Cards (NICs) are network cards with
paired ports (2 or 4). The pairs either act as a "wire" allowing the
network packets to pass or insert the device in between the two ports.
When paired with the on-board hardware watchdog or other failsafe, they
provide high availability for the network in the face of software
outages or maintenance.
Signed-off-by: Daniel Cotey <puff65537@bansheeslibrary.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this is because it doesn't fail anywhere and returning a value
from it will be completely unnecesary.
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
when alloc_etherdev fails we should be returning ENOMEM, not ENODEV
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
we are using spaces at the beginning of the line, we should use
tabs instead
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a) put the device_get_options functions' opening brace below
b) replace spaces with tabs
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
a) replace spaces with tabs
b) put the opening brace of get_chip_name below it
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix build warnings resulting from in-progress work that was
not entirely ifdef'd out.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI probe routines have to be named _probe to avoid section mismatch warning.
Found when doing 'make allmodconfig'
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dereference should be moved below the NULL test.
spatch with a semantic match is used to found this.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A lot of the messages produced by this driver are just noise and
need to be removed. For now just convert them all to dev_printk's.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the remaining defines in this header to the c file. Nothing
in the header is needed by any other file.
While moving the defines, reorder them so that the bit defines
are associated with the register they go with. Also, convert the
bit defines to bit shifts to make them a bit clearer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the struct me4000_info definition from the header to the c
file. This struct is not used by any other file.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since this driver is using the 8253.h helpers, these defines are
no longer needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Absorb the cnt_reset and cnt_config helper functions. They are
now both just single line routines.
Remove the printk noise about "Invalid instruction length".
Fix the return value, the value should be the number of data values
used to perform the instruction. The GPCT_RESET instruction only
has one parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The counter subdevice of this board is a standard 8254 compatible
counter/timer. Instead of open-coding the 8254 timer io, use the
helper functions provided by 8253.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename reset_board() to me4000_reset() so it has namespace associated
with this driver. Change it's return type to void, it always succeeds.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only set the dev->irq when the request_irq is successful.
Use the dev->board_name for the name passed to request_irq.
Change the printk messages into dev_warn().
Make sure free_irq is called in the detach.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Combine the sanity checks for valid io addresses into one if().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The program_regbase variable in the private data is only used
when the board is first attached. This variable holds the pci
base address used to read/write the xilinx part to upload the
firmware.
Use a local variable in the xilinx_download() function to hold
this address and remove program_regbase from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function. Since the
driver does not require any external configuration options, and
the legacy 'attach' callback is now optional, remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the non pci probe related code out of the me4000_probe function
and back into the me4000_attach function in preparation of converting
this driver to the 'attach_pci' callback.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the hw_dev pointer in the comedi_device struct to hold the
pci_dev instead of carrying it in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move some of the functions to avoid the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use range_bipolar10, which is exported by the comedi core, instead
of creating a local symbol for an identical range.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This macro relies on a local variable having a specific name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The init_board_info() function only gets the irq number from the
pci_dev. Just move the code into the function that calls it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the irq variable provided in the comedi_device to save the
irq number and remove it from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ao context is a struct containing all the register addresses
used with the ao subdevice. These can easily be calculated when
needed. Remove the me4000_ao_context struct, its initialization
function, and it's variable in the private data.
The last value written to the ao channels still needs to be saved
in the private data for readback.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These values are never used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This value is read from the pci config space but it is never used.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This value is read from the pci config space but it is never used.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ai context is a struct containing all the register addresses
used with the ai subdevice. These can easily be calculated when
needed. Remove the me4000_ai_context struct, its intialization
function, and it's variable in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dio context is a struct containing all the register addresses
used with the dio subdevice. These can easily be calculated when
needed. Remove the me4000_dio_context struct, its intialization
function, and it's variable in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the iobase variable provided in the comedi_device for the
main base address used in the driver. Remove the me4000_regbase
variable from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The me4000_probe() function has a bunch of error messages that
are displayed when various parts of the probe fail. These are
just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The get_registers() function reads the pci base addresses used
in the driver. It's simple enough, just move the code into the
function that calls it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the error messages about the pci base address not being
available. They are just noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to get the resource size for each pci bar. Nothing
in the driver uses it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The me4000_cnt_contect simply holds the unsigned long i/o addresses
used to read/write the counter registers. Thes can be calculated
as needed. Remove the struct and the associated field in the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
