These will be replaced in the near future, the code isn't yet stable enough
for this merge window however.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Been tested on each major revision that's relevant here, but I'm sure there
are still bugs waiting to be ironed out.
This is a *very* invasive change.
There's a couple of pieces left that I don't like much (eg. other engines
using fifo_priv for the channel count), but that's an artefact of there
being a master channel list still. This is changing, slowly.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Now have a somewhat simpler semaphore sync implementation for nv17:nv84,
and a switched to using semaphores as fences on nv84+ and making use of
the hardware's >= acquire operation.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Just a cleanup more or less, and to remove the need for special handling of
software objects.
This removes a heap of documentation on dma/graph object formats. The info
is very out of date with our current understanding, and is far better
documented in rnndb in envytools git.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This may, perhaps, get re-merged with nvc0_graph.c at some point. It's
still unclear as to how great an idea that'd be. Stay tuned...
Completely dependent on firmware blobs from NVIDIA binary driver currently.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds prime->fd and fd->prime support to nouveau,
it passes the SG object to TTM, and then populates the
GART entries using it.
v2: add stubbed kmap + use new function to fill out pages array
for faulting + add reimport test.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
- moves out of nouveau_bios.c and demagics the logical state definitions
- simplifies chipset-specific driver interface
- makes most of gpio irq handling common, will use for nv4x hpd later
- api extended to allow both direct gpio access, and access using the
logical function states
- api extended to allow for future use of gpio extender chips
- pre-nv50 was handled very badly, the main issue being that all GPIOs
were being treated as output-only.
- fixes nvd0 so gpio changes actually stick, magic reg needs bashing
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The DCB table provided by the VBIOS on most MXM chips has a number of
entries which either need to be disabled, or modified according to the
MXM-SIS Output Device Descriptors.
The x86 vbios code usually takes care of this for us, however, with the
large number of laptops now with switchable graphics or optimus, a lot
of the time nouveau is responsible for POSTing the card instead - leaving
some fun situations like, plugging in a monitor and having nouveau decide
3 connectors actually just got plugged in..
No MXM-SIS fetching methods implemented yet.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Not 100% perfect yet, but a good start towards what it'll look like in the
end.
Actually seems stable on a NV44 I have here, as much as running around OA
for a fair amount of time constantly switching between performance levels
can prove..
My NV49 isn't quite so happy, and semaphores mess up somehow (sometimes) as
a result of the memory reclocking.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is required on nv50 as we need to be able to have more precise control
over physical VRAM allocations to avoid buffer corruption when using
buffers of mixed memory types.
This removes some nasty overallocation/alignment that we were previously
using to "control" this problem.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently just hooked up to the already-existing nouveau_hw, which should
handle all relevant chipsets as well as we currently can.
This will likely be eventually split out and improved into chipset specific
code at a later point.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This will make nouveau_pm attempt to report the card's current performance
level both during bootup, and through sysfs.
This is a very initial implementation, and can be improved a *lot*
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fixes the randomly flashing vertical lines seen on some nv3x after a
cold-boot.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This makes nouveau recognise and report more kinds of PGRAPH errors, as
well as prevent GPU lockups resulting from some of them.
Lots of guesswork was involved and some part of this is probably
incorrect. Some potential-lockuop situations are handled by just
resetting a whole PGRAPH subunit, which doesn't sound like a "proper"
solution, but seems to work just fine... for now.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This removes dependence on external firmware for NV50 generation cards.
If the generated ctxprogs don't work for you for some reason, please
report it.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The context programs are *very* simple compared to the ones used by
the binary driver. There's notes in nv40_grctx.c explaining most of
the things we don't implement. If we discover if/why any of it is
required further down the track, we'll handle it then.
The PGRAPH state generated for each chipset should match what NVIDIA
do almost exactly (there's a couple of exceptions). If someone has
a lot of time on their hands, they could figure out the mapping of
object/method to PGRAPH register and demagic the initial state a little,
it's not terribly important however.
At time of commit, confirmed to be working at least well enough for
accelerated X (and where tested, for 3D apps) on NV40, NV43, NV44, NV46,
NV49, NV4A, NV4B and NV4E.
A module option has been added to force the use of external firmware
blobs if it becomes required.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.
This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.
This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.
This driver is reverse engineered, and is in no way supported by nVidia.
Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.
This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.
The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
