Instead of allocating and copying instruction history each time we
enqueue child verifier state, switch to a model where we use one common
dynamically sized array of instruction history entries across all states.
The key observation for proving this is correct is that instruction
history is only relevant while state is active, which means it either is
a current state (and thus we are actively modifying instruction history
and no other state can interfere with us) or we are checkpointed state
with some children still active (either enqueued or being current).
In the latter case our portion of instruction history is finalized and
won't change or grow, so as long as we keep it immutable until the state
is finalized, we are good.
Now, when state is finalized and is put into state hash for potentially
future pruning lookups, instruction history is not used anymore. This is
because instruction history is only used by precision marking logic, and
we never modify precision markings for finalized states.
So, instead of each state having its own small instruction history, we
keep a global dynamically-sized instruction history, where each state in
current DFS path from root to active state remembers its portion of
instruction history. Current state can append to this history, but
cannot modify any of its parent histories.
Async callback state enqueueing, while logically detached from parent
state, still is part of verification backtracking tree, so has to follow
the same schema as normal state checkpoints.
Because the insn_hist array can be grown through realloc, states don't
keep pointers, they instead maintain two indices, [start, end), into
global instruction history array. End is exclusive index, so
`start == end` means there is no relevant instruction history.
This eliminates a lot of allocations and minimizes overall memory usage.
For instance, running a worst-case test from [0] (but without the
heuristics-based fix [1]), it took 12.5 minutes until we get -ENOMEM.
With the changes in this patch the whole test succeeds in 10 minutes
(very slow, so heuristics from [1] is important, of course).
To further validate correctness, veristat-based comparison was performed for
Meta production BPF objects and BPF selftests objects. In both cases there
were no differences *at all* in terms of verdict or instruction and state
counts, providing a good confidence in the change.
Having this low-memory-overhead solution of keeping dynamic
per-instruction history cheaply opens up some new possibilities, like
keeping extra information for literally every single validated
instruction. This will be used for simplifying precision backpropagation
logic in follow up patches.
[0] https://lore.kernel.org/bpf/20241029172641.1042523-2-eddyz87@gmail.com/
[1] https://lore.kernel.org/bpf/20241029172641.1042523-1-eddyz87@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241115001303.277272-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running bpf selftest (./test_progs -j), the following warnings
showed up:
$ ./test_progs -t arena_atomics
...
BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u19:0/12501
caller is bpf_mem_free+0x128/0x330
...
Call Trace:
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_free
range_tree_destroy
arena_map_free
bpf_map_free_deferred
process_scheduled_works
...
For selftests arena_htab and arena_list, similar smp_process_id() BUGs are
dumped, and the following are two stack trace:
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_alloc
range_tree_set
arena_map_alloc
map_create
...
<TASK>
dump_stack_lvl
check_preemption_disabled
bpf_mem_alloc
range_tree_clear
arena_vm_fault
do_pte_missing
handle_mm_fault
do_user_addr_fault
...
Add migrate_{disable,enable}() around related bpf_mem_{alloc,free}()
calls to fix the issue.
Fixes: b795379757 ("bpf: Introduce range_tree data structure and use it in bpf arena")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241115060354.2832495-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce range_tree data structure and use it in bpf arena to track
ranges of allocated pages. range_tree is a large bitmap that is
implemented as interval tree plus rbtree. The contiguous sequence of
bits represents unallocated pages.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-2-alexei.starovoitov@gmail.com
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Without kernel symbols for struct_ops trampoline, the unwinder may
produce unexpected stacktraces.
For example, the x86 ORC and FP unwinders check if an IP is in kernel
text by verifying the presence of the IP's kernel symbol. When a
struct_ops trampoline address is encountered, the unwinder stops due
to the absence of symbol, resulting in an incomplete stacktrace that
consists only of direct and indirect child functions called from the
trampoline.
The arm64 unwinder is another example. While the arm64 unwinder can
proceed across a struct_ops trampoline address, the corresponding
symbol name is displayed as "unknown", which is confusing.
Thus, add kernel symbol for struct_ops trampoline. The name is
bpf__<struct_ops_name>_<member_name>, where <struct_ops_name> is the
type name of the struct_ops, and <member_name> is the name of
the member that the trampoline is linked to.
Below is a comparison of stacktraces captured on x86 by perf record,
before and after this patch.
Before:
ffffffff8116545d __lock_acquire+0xad ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff813088f4 __bpf_prog_enter+0x34 ([kernel.kallsyms])
After:
ffffffff811656bd __lock_acquire+0x30d ([kernel.kallsyms])
ffffffff81167fcc lock_acquire+0xcc ([kernel.kallsyms])
ffffffff81309024 __bpf_prog_enter+0x34 ([kernel.kallsyms])
ffffffffc000d7e9 bpf__tcp_congestion_ops_cong_avoid+0x3e ([kernel.kallsyms])
ffffffff81f250a5 tcp_ack+0x10d5 ([kernel.kallsyms])
ffffffff81f27c66 tcp_rcv_established+0x3b6 ([kernel.kallsyms])
ffffffff81f3ad03 tcp_v4_do_rcv+0x193 ([kernel.kallsyms])
ffffffff81d65a18 __release_sock+0xd8 ([kernel.kallsyms])
ffffffff81d65af4 release_sock+0x34 ([kernel.kallsyms])
ffffffff81f15c4b tcp_sendmsg+0x3b ([kernel.kallsyms])
ffffffff81f663d7 inet_sendmsg+0x47 ([kernel.kallsyms])
ffffffff81d5ab40 sock_write_iter+0x160 ([kernel.kallsyms])
ffffffff8149c67b vfs_write+0x3fb ([kernel.kallsyms])
ffffffff8149caf6 ksys_write+0xc6 ([kernel.kallsyms])
ffffffff8149cb5d __x64_sys_write+0x1d ([kernel.kallsyms])
ffffffff81009200 x64_sys_call+0x1d30 ([kernel.kallsyms])
ffffffff82232d28 do_syscall_64+0x68 ([kernel.kallsyms])
ffffffff8240012f entry_SYSCALL_64_after_hwframe+0x76 ([kernel.kallsyms])
Fixes: 85d33df357 ("bpf: Introduce BPF_MAP_TYPE_STRUCT_OPS")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112145849.3436772-4-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Only function pointers in a struct_ops structure can be linked to bpf
progs, so set the links count to the function pointers count, instead
of the total members count in the structure.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20241112145849.3436772-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The rcu member in bpf_struct_ops_map is not used after commit
b671c2067a ("bpf: Retire the struct_ops map kvalue->refcnt.")
Remove it.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20241112145849.3436772-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For struct_ops progs, whether a particular prog uses private stack
depends on prog->aux->priv_stack_requested setting before actual
insn-level verification for that prog. One particular implementation
is to piggyback on struct_ops->check_member(). The next patch has
an example for this. The struct_ops->check_member() sets
prog->aux->priv_stack_requested to be true which enables private stack
usage.
The struct_ops prog follows the same rule as kprobe/tracing progs after
function bpf_enable_priv_stack(). For example, even a struct_ops prog
requests private stack, it could still use normal kernel stack if
the stack size is small (< 64 bytes).
Similar to tracing progs, nested same cpu same prog run will be skipped.
A field (recursion_detected()) is added to bpf_prog_aux structure.
If bpf_prog->aux->recursion_detected is implemented by the struct_ops
subsystem and nested same cpu/prog happens, the function will be
triggered to report an error, collect related info, etc.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163933.2224962-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If private stack is used by any subprog, set that subprog
prog->aux->jits_use_priv_stack to be true so later jit can allocate
private stack for that subprog properly.
Also set env->prog->aux->jits_use_priv_stack to be true if
any subprog uses private stack. This is a use case for a
single main prog (no subprogs) to use private stack, and
also a use case for later struct-ops progs where
env->prog->aux->jits_use_priv_stack will enable recursion
check if any subprog uses private stack.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163912.2224007-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Private stack will be allocated with percpu allocator in jit time.
To avoid complexity at runtime, only one copy of private stack is
available per cpu per prog. So runtime recursion check is necessary
to avoid stack corruption.
Current private stack only supports kprobe/perf_event/tp/raw_tp
which has recursion check in the kernel, and prog types that use
bpf trampoline recursion check. For trampoline related prog types,
currently only tracing progs have recursion checking.
To avoid complexity, all async_cb subprogs use normal kernel stack
including those subprogs used by both main prog subtree and async_cb
subtree. Any prog having tail call also uses kernel stack.
To avoid jit penalty with private stack support, a subprog stack
size threshold is set such that only if the stack size is no less
than the threshold, private stack is supported. The current threshold
is 64 bytes. This avoids jit penality if the stack usage is small.
A useless 'continue' is also removed from a loop in func
check_max_stack_depth().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20241112163907.2223839-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- The fair sched class currently has a bug where its balance() returns true
telling the sched core that it has tasks to run but then NULL from
pick_task(). This makes sched core call sched_ext's pick_task() without
preceding balance() which can lead to stalls in partial mode. For now,
work around by detecting the condition and forcing the CPU to go through
another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection tool
which went out of sync.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZzI8sw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGb5KAP40b/o6TyAFDG+Hn6GxyxQT7rcAUMXsdB2bcEpg
/IjmzQEAwbHU5KP5vQXV6XHv+2V7Rs7u6ZqFtDnL88N0A9hf3wk=
=7hL8
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- The fair sched class currently has a bug where its balance() returns
true telling the sched core that it has tasks to run but then NULL
from pick_task(). This makes sched core call sched_ext's pick_task()
without preceding balance() which can lead to stalls in partial mode.
For now, work around by detecting the condition and forcing the CPU
to go through another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection
tool which went out of sync.
* tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()
sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type
sched_ext: Add a missing newline at the end of an error message
Logic to prevent callbacks from acquiring new references for the program
(i.e. leaving acquired references), and releasing caller references
(i.e. those acquired in parent frames) was introduced in commit
9d9d00ac29 ("bpf: Fix reference state management for synchronous callbacks").
This was necessary because back then, the verifier simulated each
callback once (that could potentially be executed N times, where N can
be zero). This meant that callbacks that left lingering resources or
cleared caller resources could do it more than once, operating on
undefined state or leaking memory.
With the fixes to callback verification in commit
ab5cfac139 ("bpf: verify callbacks as if they are called unknown number of times"),
all of this extra logic is no longer necessary. Hence, drop it as part
of this commit.
Cc: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
When bpf_spin_lock was introduced originally, there was deliberation on
whether to use an array of lock IDs, but since bpf_spin_lock is limited
to holding a single lock at any given time, we've been using a single ID
to identify the held lock.
In preparation for introducing spin locks that can be taken multiple
times, introduce support for acquiring multiple lock IDs. For this
purpose, reuse the acquired_refs array and store both lock and pointer
references. We tag the entry with REF_TYPE_PTR or REF_TYPE_LOCK to
disambiguate and find the relevant entry. The ptr field is used to track
the map_ptr or btf (for bpf_obj_new allocations) to ensure locks can be
matched with protected fields within the same "allocation", i.e.
bpf_obj_new object or map value.
The struct active_lock is changed to an int as the state is part of the
acquired_refs array, and we only need active_lock as a cheap way of
detecting lock presence.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241109231430.2475236-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
For htab of maps, when the map is removed from the htab, it may hold the
last reference of the map. bpf_map_fd_put_ptr() will invoke
bpf_map_free_id() to free the id of the removed map element. However,
bpf_map_fd_put_ptr() is invoked while holding a bucket lock
(raw_spin_lock_t), and bpf_map_free_id() attempts to acquire map_idr_lock
(spinlock_t), triggering the following lockdep warning:
=============================
[ BUG: Invalid wait context ]
6.11.0-rc4+ #49 Not tainted
-----------------------------
test_maps/4881 is trying to lock:
ffffffff84884578 (map_idr_lock){+...}-{3:3}, at: bpf_map_free_id.part.0+0x21/0x70
other info that might help us debug this:
context-{5:5}
2 locks held by test_maps/4881:
#0: ffffffff846caf60 (rcu_read_lock){....}-{1:3}, at: bpf_fd_htab_map_update_elem+0xf9/0x270
#1: ffff888149ced148 (&htab->lockdep_key#2){....}-{2:2}, at: htab_map_update_elem+0x178/0xa80
stack backtrace:
CPU: 0 UID: 0 PID: 4881 Comm: test_maps Not tainted 6.11.0-rc4+ #49
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xb0
dump_stack+0x10/0x20
__lock_acquire+0x73e/0x36c0
lock_acquire+0x182/0x450
_raw_spin_lock_irqsave+0x43/0x70
bpf_map_free_id.part.0+0x21/0x70
bpf_map_put+0xcf/0x110
bpf_map_fd_put_ptr+0x9a/0xb0
free_htab_elem+0x69/0xe0
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
htab_map_update_elem+0x50f/0xa80
bpf_fd_htab_map_update_elem+0x131/0x270
bpf_map_update_value+0x266/0x380
__sys_bpf+0x21bb/0x36b0
__x64_sys_bpf+0x45/0x60
x64_sys_call+0x1b2a/0x20d0
do_syscall_64+0x5d/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
One way to fix the lockdep warning is using raw_spinlock_t for
map_idr_lock as well. However, bpf_map_alloc_id() invokes
idr_alloc_cyclic() after acquiring map_idr_lock, it will trigger a
similar lockdep warning because the slab's lock (s->cpu_slab->lock) is
still a spinlock.
Instead of changing map_idr_lock's type, fix the issue by invoking
htab_put_fd_value() after htab_unlock_bucket(). However, only deferring
the invocation of htab_put_fd_value() is not enough, because the old map
pointers in htab of maps can not be saved during batched deletion.
Therefore, also defer the invocation of free_htab_elem(), so these
to-be-freed elements could be linked together similar to lru map.
There are four callers for ->map_fd_put_ptr:
(1) alloc_htab_elem() (through htab_put_fd_value())
It invokes ->map_fd_put_ptr() under a raw_spinlock_t. The invocation of
htab_put_fd_value() can not simply move after htab_unlock_bucket(),
because the old element has already been stashed in htab->extra_elems.
It may be reused immediately after htab_unlock_bucket() and the
invocation of htab_put_fd_value() after htab_unlock_bucket() may release
the newly-added element incorrectly. Therefore, saving the map pointer
of the old element for htab of maps before unlocking the bucket and
releasing the map_ptr after unlock. Beside the map pointer in the old
element, should do the same thing for the special fields in the old
element as well.
(2) free_htab_elem() (through htab_put_fd_value())
Its caller includes __htab_map_lookup_and_delete_elem(),
htab_map_delete_elem() and __htab_map_lookup_and_delete_batch().
For htab_map_delete_elem(), simply invoke free_htab_elem() after
htab_unlock_bucket(). For __htab_map_lookup_and_delete_batch(), just
like lru map, linking the to-be-freed element into node_to_free list
and invoking free_htab_elem() for these element after unlock. It is safe
to reuse batch_flink as the link for node_to_free, because these
elements have been removed from the hash llist.
Because htab of maps doesn't support lookup_and_delete operation,
__htab_map_lookup_and_delete_elem() doesn't have the problem, so kept
it as is.
(3) fd_htab_map_free()
It invokes ->map_fd_put_ptr without raw_spinlock_t.
(4) bpf_fd_htab_map_update_elem()
It invokes ->map_fd_put_ptr without raw_spinlock_t.
After moving free_htab_elem() outside htab bucket lock scope, using
pcpu_freelist_push() instead of __pcpu_freelist_push() to disable
the irq before freeing elements, and protecting the invocations of
bpf_mem_cache_free() with migrate_{disable|enable} pair.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241106063542.357743-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Placing bpf_session_run_ctx layer in between bpf_run_ctx and
bpf_uprobe_multi_run_ctx, so the session data can be retrieved
from uprobe_multi link.
Plus granting session kfuncs access to uprobe session programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-5-jolsa@kernel.org
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
As suggested by Andrii make uprobe multi bpf programs to always return 0,
so they can't force uprobe removal.
Keeping the int return type for uprobe_prog_run, because it will be used
in following session changes.
Fixes: 89ae89f53d ("bpf: Add multi uprobe link")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-3-jolsa@kernel.org
The kprobe session program can return only 0 or 1,
instruct verifier to check for that.
Fixes: 535a3692ba ("bpf: Add support for kprobe session attach")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-2-jolsa@kernel.org
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZzBVmAAKCRDdBJ7gKXxA
ju42AQD0EEnzW+zFyI+E7x5FwCmLL6ofmzM8Sw9YrKjaeShdZgEAhcyS2Rc/AaJq
Uty2ZvVMDF2a9p9gqHfKKARBXEbN2w0=
=n+lO
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
sched_ext dispatches tasks from the BPF scheduler from balance_scx() and
thus every pick_task_scx() call must be preceded by balance_scx(). While
this usually holds, due to a bug, there are cases where the fair class's
balance() returns true indicating that it has tasks to run on the CPU and
thus terminating balance() calls but fails to actually find the next task to
run when pick_task() is called. In such cases, pick_task_scx() can be called
without preceding balance_scx().
Detect this condition using SCX_RQ_BAL_PENDING flags. If detected, keep
running the previous task if possible and avoid stalling from entering idle
without balancing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/Ztj_h5c2LYsdXYbA@slm.duckdns.org
Prior to commit d646969055 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior.
Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev
Fixes: d646969055 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The inc_rlimit_get_ucounts() increments the specified rlimit counter and
then checks its limit. If the value exceeds the limit, the function
returns an error without decrementing the counter.
Link: https://lkml.kernel.org/r/20241101191940.3211128-1-roman.gushchin@linux.dev
Fixes: 15bc01effe ("ucounts: Fix signal ucount refcounting")
Signed-off-by: Andrei Vagin <avagin@google.com>
Co-developed-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Tested-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <legion@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility.
It is ignored when it is set. Fix the code so that it recognises the
option again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZyuidRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsgQAQDuV0x4RLpCrrowDS/ITQw/eb/WjhR7
lhkXVROLN6RK6wD+JWmbaCP82q2S4A2Vx0Rjc72gUMmTzDb1HQflhQiLhwU=
=0dZF
-----END PGP SIGNATURE-----
Merge tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
"Fix tracefs mount options.
Commit 78ff640819 ("vfs: Convert tracefs to use the new mount API")
broke the gid setting when set by fstab or other mount utility. It is
ignored when it is set. Fix the code so that it recognises the option
again and will honor the settings on mount at boot up.
Update the internal documentation and create a selftest to make sure
it doesn't break again in the future"
* tag 'tracefs-v6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/selftests: Add tracefs mount options test
tracing: Document tracefs gid mount option
tracing: Fix tracefs mount options
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Reported-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Juri Lelli <juri.lelli@redhat.com>
Fixes: 3f00c52393 ("bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are similar checks for covering locks, references, RCU read
sections and preempt_disable sections in 3 places in the verifer, i.e.
for tail calls, bpf_ld_[abs, ind], and exit path (for BPF_EXIT and
bpf_throw). Unify all of these into a common check_resource_leak
function to avoid code duplication.
Also update the error strings in selftests to the new ones in the same
change to ensure clean bisection.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241103225940.1408302-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are three situations when a program logically exits and transfers
control to the kernel or another program: bpf_throw, BPF_EXIT, and tail
calls. The former two check for any lingering locks and references, but
tail calls currently do not. Expand the checks to check for spin locks,
RCU read sections and preempt disabled sections.
Spin locks are indirectly preventing tail calls as function calls are
disallowed, but the checks for preemption and RCU are more relaxed,
hence ensure tail calls are prevented in their presence.
Fixes: 9bb00b2895 ("bpf: Add kfunc bpf_rcu_read_lock/unlock()")
Fixes: fc7566ad0a ("bpf: Introduce bpf_preempt_[disable,enable] kfuncs")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241103225940.1408302-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency in
the tasks tick_dep_mask is set and copied to the new thread, which means
the new thread and all decendants will prevent the system to go into full
NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this.
-----BEGIN PGP SIGNATURE-----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=83r/
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for posix CPU timers.
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency
in the tasks tick_dep_mask is set and copied to the new thread, which
means the new thread and all decendants will prevent the system to go
into full NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this"
* tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not queued.
Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq is
the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap of
the address space can result in a NULL pointer return from vma_next()
which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
-----BEGIN PGP SIGNATURE-----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=4mie
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not
queued. Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq
is the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap
of the address space can result in a NULL pointer return from
vma_next() which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
* tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/ext: Fix scx vs sched_delayed
sched: Pass correct scheduling policy to __setscheduler_class
sched/numa: Fix the potential null pointer dereference in task_numa_work()
sched: Fix pick_next_task_fair() vs try_to_wake_up() race
perf_event_clear_cpumask() uses list_for_each_entry_rcu() without being
in a RCU read side critical section, which triggers a "suspicious RCU
usage" warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this contxt.
Change it to a regular list walk.
-----BEGIN PGP SIGNATURE-----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=qlTN
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"perf_event_clear_cpumask() uses list_for_each_entry_rcu() without
being in a RCU read side critical section, which triggers a
'suspicious RCU usage' warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this context.
Change it to a regular list walk"
* tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix missing RCU reader protection in perf_event_clear_cpumask()
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the first
allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to fail.
Return success in this case without touching the hardware. This will be
done later when the guest issues the mapping command.
-----BEGIN PGP SIGNATURE-----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=6Li6
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the
first allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to
fail.
Return success in this case without touching the hardware. This will
be done later when the guest issues the mapping command.
* tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v4: Correctly deal with set_affinity on lazily-mapped VPEs
genirq/msi: Fix off-by-one error in msi_domain_alloc()
Add a new open coded iterator for kmem_cache which can be called from a
BPF program like below. It doesn't take any argument and traverses all
kmem_cache entries.
struct kmem_cache *pos;
bpf_for_each(kmem_cache, pos) {
...
}
As it needs to grab slab_mutex, it should be called from sleepable BPF
programs only.
Also update the existing iterator code to use the open coded version
internally as suggested by Andrii.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241030222819.1800667-1-namhyung@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit ee7f366699 ("tracefs: Have new files inherit the ownership of
their parent") and commit 48b27b6b51 ("tracefs: Set all files to the
same group ownership as the mount option") introduced a new gid mount
option that allows specifying a group to apply to all entries in tracefs.
Document this in the tracing readme.
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ali Zahraee <ahzahraee@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20241030171928.4168869-3-kaleshsingh@google.com
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Fix BPF verifier to force a checkpoint when the program's jump
history becomes too long (Eduard Zingerman)
- Add several fixes to the BPF bits iterator addressing issues
like memory leaks and overflow problems (Hou Tao)
- Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong)
- Fix BPF test infra's LIVE_FRAME frame update after a page has
been recycled (Toke Høiland-Jørgensen)
- Fix BPF verifier and undo the 40-bytes extra stack space for
bpf_fastcall patterns due to various bugs (Eduard Zingerman)
- Fix a BPF sockmap race condition which could trigger a NULL
pointer dereference in sock_map_link_update_prog (Cong Wang)
- Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk
under the socket lock (Jiayuan Chen)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZyQO/RUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIO2vAD+NAng11x6W9tnIOVDHTwvsWL4aafQ
pmf1zda90bwCIyIA/07ptFPWOH+WTmWqP8pZ9PGY5279KAxurZZDud0SOwIO
=28aY
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix BPF verifier to force a checkpoint when the program's jump
history becomes too long (Eduard Zingerman)
- Add several fixes to the BPF bits iterator addressing issues like
memory leaks and overflow problems (Hou Tao)
- Fix an out-of-bounds write in trie_get_next_key (Byeonguk Jeong)
- Fix BPF test infra's LIVE_FRAME frame update after a page has been
recycled (Toke Høiland-Jørgensen)
- Fix BPF verifier and undo the 40-bytes extra stack space for
bpf_fastcall patterns due to various bugs (Eduard Zingerman)
- Fix a BPF sockmap race condition which could trigger a NULL pointer
dereference in sock_map_link_update_prog (Cong Wang)
- Fix tcp_bpf_recvmsg_parser to retrieve seq_copied from tcp_sk under
the socket lock (Jiayuan Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, test_run: Fix LIVE_FRAME frame update after a page has been recycled
selftests/bpf: Add three test cases for bits_iter
bpf: Use __u64 to save the bits in bits iterator
bpf: Check the validity of nr_words in bpf_iter_bits_new()
bpf: Add bpf_mem_alloc_check_size() helper
bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()
bpf: disallow 40-bytes extra stack for bpf_fastcall patterns
selftests/bpf: Add test for trie_get_next_key()
bpf: Fix out-of-bounds write in trie_get_next_key()
selftests/bpf: Test with a very short loop
bpf: Force checkpoint when jmp history is too long
bpf: fix filed access without lock
sock_map: fix a NULL pointer dereference in sock_map_link_update_prog()
Avoid taking refcount on uprobe in prepare_uretprobe(), instead take
uretprobe-specific SRCU lock and keep it active as kernel transfers
control back to user space.
Given we can't rely on user space returning from traced function within
reasonable time period, we need to make sure not to keep SRCU lock
active for too long, though. To that effect, we employ a timer callback
which is meant to terminate SRCU lock region after predefined timeout
(currently set to 100ms), and instead transfer underlying struct
uprobe's lifetime protection to refcounting.
This fallback to less scalable refcounting after 100ms is a fine
tradeoff from uretprobe's scalability and performance perspective,
because uretprobing *long running* user functions inherently doesn't run
into scalability issues (there is just not enough frequency to cause
noticeable issues with either performance or scalability).
The overall trick is in ensuring synchronization between current thread
and timer's callback fired on some other thread. To cope with that with
minimal logic complications, we add hprobe wrapper which is used to
contain all the synchronization related issues behind a small number of
basic helpers: hprobe_expire() for "downgrading" uprobe from SRCU-protected
state to refcounted state, and a hprobe_consume() and hprobe_finalize()
pair of single-use consuming helpers. Other than that, whatever current
thread's logic is there stays the same, as timer thread cannot modify
return_instance state (or add new/remove old return_instances). It only
takes care of SRCU unlock and uprobe refcounting, which is hidden from
the higher-level uretprobe handling logic.
We use atomic xchg() in hprobe_consume(), which is called from
performance critical handle_uretprobe_chain() function run in the
current context. When uncontended, this xchg() doesn't seem to hurt
performance as there are no other competing CPUs fighting for the same
cache line. We also mark struct return_instance as ____cacheline_aligned
to ensure no false sharing can happen.
Another technical moment. We need to make sure that the list of return
instances can be safely traversed under RCU from timer callback, so we
delay return_instance freeing with kfree_rcu() and make sure that list
modifications use RCU-aware operations.
Also, given SRCU lock survives transition from kernel to user space and
back we need to use lower-level __srcu_read_lock() and
__srcu_read_unlock() to avoid lockdep complaining.
Just to give an impression of a kind of performance improvements this
change brings, below are benchmarking results with and without these
SRCU changes, assuming other uprobe optimizations (mainly RCU Tasks
Trace for entry uprobes, lockless RB-tree lookup, and lockless VMA to
uprobe lookup) are left intact:
WITHOUT SRCU for uretprobes
===========================
uretprobe-nop ( 1 cpus): 2.197 ± 0.002M/s ( 2.197M/s/cpu)
uretprobe-nop ( 2 cpus): 3.325 ± 0.001M/s ( 1.662M/s/cpu)
uretprobe-nop ( 3 cpus): 4.129 ± 0.002M/s ( 1.376M/s/cpu)
uretprobe-nop ( 4 cpus): 6.180 ± 0.003M/s ( 1.545M/s/cpu)
uretprobe-nop ( 8 cpus): 7.323 ± 0.005M/s ( 0.915M/s/cpu)
uretprobe-nop (16 cpus): 6.943 ± 0.005M/s ( 0.434M/s/cpu)
uretprobe-nop (32 cpus): 5.931 ± 0.014M/s ( 0.185M/s/cpu)
uretprobe-nop (64 cpus): 5.145 ± 0.003M/s ( 0.080M/s/cpu)
uretprobe-nop (80 cpus): 4.925 ± 0.005M/s ( 0.062M/s/cpu)
WITH SRCU for uretprobes
========================
uretprobe-nop ( 1 cpus): 1.968 ± 0.001M/s ( 1.968M/s/cpu)
uretprobe-nop ( 2 cpus): 3.739 ± 0.003M/s ( 1.869M/s/cpu)
uretprobe-nop ( 3 cpus): 5.616 ± 0.003M/s ( 1.872M/s/cpu)
uretprobe-nop ( 4 cpus): 7.286 ± 0.002M/s ( 1.822M/s/cpu)
uretprobe-nop ( 8 cpus): 13.657 ± 0.007M/s ( 1.707M/s/cpu)
uretprobe-nop (32 cpus): 45.305 ± 0.066M/s ( 1.416M/s/cpu)
uretprobe-nop (64 cpus): 42.390 ± 0.922M/s ( 0.662M/s/cpu)
uretprobe-nop (80 cpus): 47.554 ± 2.411M/s ( 0.594M/s/cpu)
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241024044159.3156646-3-andrii@kernel.org
Currently put_uprobe() might trigger mutex_lock()/mutex_unlock(), which
makes it unsuitable to be called from more restricted context like softirq.
Let's make put_uprobe() agnostic to the context in which it is called,
and use work queue to defer the mutex-protected clean up steps.
RB tree removal step is also moved into work-deferred callback to avoid
potential deadlock between softirq-based timer callback, added in the
next patch, and the rest of uprobe code.
We can rework locking altogher as a follow up, but that's significantly
more tricky, so warrants its own patch set. For now, we need to make
sure that changes in the next patch that add timer thread work correctly
with existing approach, while concentrating on SRCU + timeout logic.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241024044159.3156646-2-andrii@kernel.org
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to
bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the
content of the u64. However, bits_copy is only 4 bytes, leading to stack
corruption.
The straightforward solution would be to replace u64 with unsigned long
in bpf_iter_bits_new(). However, this introduces confusion and problems
for 32-bit hosts because the size of ulong in bpf program is 8 bytes,
but it is treated as 4-bytes after passed to bpf_iter_bits_new().
Fix it by changing the type of both bits and bit_count from unsigned
long to u64. However, the change is not enough. The main reason is that
bpf_iter_bits_next() uses find_next_bit() to find the next bit and the
pointer passed to find_next_bit() is an unsigned long pointer instead
of a u64 pointer. For 32-bit little-endian host, it is fine but it is
not the case for 32-bit big-endian host. Because under 32-bit big-endian
host, the first iterated unsigned long will be the bits 32-63 of the u64
instead of the expected bits 0-31. Therefore, in addition to changing
the type, swap the two unsigned longs within the u64 for 32-bit
big-endian host.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.
Fixes: 4665415975 ("bpf: Add bits iterator")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce bpf_mem_alloc_check_size() to check whether the allocation
size exceeds the limitation for the kmalloc-equivalent allocator. The
upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than
non-percpu allocation, so a percpu argument is added to the helper.
The helper will be used in the following patch to check whether the size
parameter passed to bpf_mem_alloc() is too big.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
unreferenced object 0xffff88812628c8c0 (size 32):
comm "swapper/0", pid 1, jiffies 4294727320
hex dump (first 32 bytes):
b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U...........
f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 ..............
backtrace (crc 781e32cc):
[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
[<00000000b119f72f>] kernel_init+0x20/0x160
[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.
Fixes: 4665415975 ("bpf: Add bits iterator")
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- cgroup_bpf_release_fn() could saturate system_wq with
cgrp->bpf.release_work which can then form a circular dependency leading
to deadlocks. Fix by using a dedicated workqueue. The system_wq's max
concurrency limit is being increased separately.
- Fix theoretical off-by-one bug when enforcing max cgroup hierarchy depth.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZyGCPA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGS2MAQDmtRNBlDYl36fiLAsylU4Coz5P0Y4ISmtSWT+c
zrEUZAD/WKSlCfy4RFngmnfkYbrJ+tWOVTMtsDqby8IzYLDGBw8=
=glRQ
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cgroup_bpf_release_fn() could saturate system_wq with
cgrp->bpf.release_work which can then form a circular dependency
leading to deadlocks. Fix by using a dedicated workqueue. The
system_wq's max concurrency limit is being increased separately.
- Fix theoretical off-by-one bug when enforcing max cgroup hierarchy
depth
* tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix potential overflow issue when checking max_depth
cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction
- Instances of scx_ops_bypass() could race each other leading to
misbehavior. Fix by protecting the operation with a spinlock.
- selftest and userspace header fixes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZyF/5Q4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGRi+AP4+jGUz+O1LS0bCNj44Xlr0v6kci5dfJR7TlBv5
hwROcgEA84i7nRq6oJ1IkK7ItLbZYwgZyxqdn0Pgsq+oMWhgAwE=
=R766
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Instances of scx_ops_bypass() could race each other leading to
misbehavior. Fix by protecting the operation with a spinlock.
- selftest and userspace header fixes
* tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix enq_last_no_enq_fails selftest
sched_ext: Make cast_mask() inline
scx: Fix raciness in scx_ops_bypass()
scx: Fix exit selftest to use custom DSQ
sched_ext: Fix function pointer type mismatches in BPF selftests
selftests/sched_ext: add order-only dependency of runner.o on BPFOBJ
trie_get_next_key() allocates a node stack with size trie->max_prefixlen,
while it writes (trie->max_prefixlen + 1) nodes to the stack when it has
full paths from the root to leaves. For example, consider a trie with
max_prefixlen is 8, and the nodes with key 0x00/0, 0x00/1, 0x00/2, ...
0x00/8 inserted. Subsequent calls to trie_get_next_key with _key with
.prefixlen = 8 make 9 nodes be written on the node stack with size 8.
Fixes: b471f2f1de ("bpf: implement MAP_GET_NEXT_KEY command for LPM_TRIE map")
Signed-off-by: Byeonguk Jeong <jungbu2855@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Tested-by: Hou Tao <houtao1@huawei.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/Zxx384ZfdlFYnz6J@localhost.localdomain
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A specifically crafted program might trick verifier into growing very
long jump history within a single bpf_verifier_state instance.
Very long jump history makes mark_chain_precision() unreasonably slow,
especially in case if verifier processes a loop.
Mitigate this by forcing new state in is_state_visited() in case if
current state's jump history is too long.
Use same constant as in `skip_inf_loop_check`, but multiply it by
arbitrarily chosen value 2 to account for jump history containing not
only information about jumps, but also information about stack access.
For an example of problematic program consider the code below,
w/o this patch the example is processed by verifier for ~15 minutes,
before failing to allocate big-enough chunk for jmp_history.
0: r7 = *(u16 *)(r1 +0);"
1: r7 += 0x1ab064b9;"
2: if r7 & 0x702000 goto 1b;
3: r7 &= 0x1ee60e;"
4: r7 += r1;"
5: if r7 s> 0x37d2 goto +0;"
6: r0 = 0;"
7: exit;"
Perf profiling shows that most of the time is spent in
mark_chain_precision() ~95%.
The easiest way to explain why this program causes problems is to
apply the following patch:
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 0c216e71cec7..4b4823961abe 100644
\--- a/include/linux/bpf.h
\+++ b/include/linux/bpf.h
\@@ -1926,7 +1926,7 @@ struct bpf_array {
};
};
-#define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */
+#define BPF_COMPLEXITY_LIMIT_INSNS 256 /* yes. 1M insns */
#define MAX_TAIL_CALL_CNT 33
/* Maximum number of loops for bpf_loop and bpf_iter_num.
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index f514247ba8ba..75e88be3bb3e 100644
\--- a/kernel/bpf/verifier.c
\+++ b/kernel/bpf/verifier.c
\@@ -18024,8 +18024,13 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
skip_inf_loop_check:
if (!force_new_state &&
env->jmps_processed - env->prev_jmps_processed < 20 &&
- env->insn_processed - env->prev_insn_processed < 100)
+ env->insn_processed - env->prev_insn_processed < 100) {
+ verbose(env, "is_state_visited: suppressing checkpoint at %d, %d jmps processed, cur->jmp_history_cnt is %d\n",
+ env->insn_idx,
+ env->jmps_processed - env->prev_jmps_processed,
+ cur->jmp_history_cnt);
add_new_state = false;
+ }
goto miss;
}
/* If sl->state is a part of a loop and this loop's entry is a part of
\@@ -18142,6 +18147,9 @@ static int is_state_visited(struct bpf_verifier_env *env, int insn_idx)
if (!add_new_state)
return 0;
+ verbose(env, "is_state_visited: new checkpoint at %d, resetting env->jmps_processed\n",
+ env->insn_idx);
+
/* There were no equivalent states, remember the current one.
* Technically the current state is not proven to be safe yet,
* but it will either reach outer most bpf_exit (which means it's safe)
And observe verification log:
...
is_state_visited: new checkpoint at 5, resetting env->jmps_processed
5: R1=ctx() R7=ctx(...)
5: (65) if r7 s> 0x37d2 goto pc+0 ; R7=ctx(...)
6: (b7) r0 = 0 ; R0_w=0
7: (95) exit
from 5 to 6: R1=ctx() R7=ctx(...) R10=fp0
6: R1=ctx() R7=ctx(...) R10=fp0
6: (b7) r0 = 0 ; R0_w=0
7: (95) exit
is_state_visited: suppressing checkpoint at 1, 3 jmps processed, cur->jmp_history_cnt is 74
from 2 to 1: R1=ctx() R7_w=scalar(...) R10=fp0
1: R1=ctx() R7_w=scalar(...) R10=fp0
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 3 jmps processed, cur->jmp_history_cnt is 75
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
... mark_precise 152 steps for r7 ...
2: R7_w=scalar(...)
is_state_visited: suppressing checkpoint at 1, 4 jmps processed, cur->jmp_history_cnt is 75
1: (07) r7 += 447767737
is_state_visited: suppressing checkpoint at 2, 4 jmps processed, cur->jmp_history_cnt is 76
2: R7_w=scalar(...)
2: (45) if r7 & 0x702000 goto pc-2
...
BPF program is too large. Processed 257 insn
The log output shows that checkpoint at label (1) is never created,
because it is suppressed by `skip_inf_loop_check` logic:
a. When 'if' at (2) is processed it pushes a state with insn_idx (1)
onto stack and proceeds to (3);
b. At (5) checkpoint is created, and this resets
env->{jmps,insns}_processed.
c. Verification proceeds and reaches `exit`;
d. State saved at step (a) is popped from stack and is_state_visited()
considers if checkpoint needs to be added, but because
env->{jmps,insns}_processed had been just reset at step (b)
the `skip_inf_loop_check` logic forces `add_new_state` to false.
e. Verifier proceeds with current state, which slowly accumulates
more and more entries in the jump history.
The accumulation of entries in the jump history is a problem because
of two factors:
- it eventually exhausts memory available for kmalloc() allocation;
- mark_chain_precision() traverses the jump history of a state,
meaning that if `r7` is marked precise, verifier would iterate
ever growing jump history until parent state boundary is reached.
(note: the log also shows a REG INVARIANTS VIOLATION warning
upon jset processing, but that's another bug to fix).
With this patch applied, the example above is rejected by verifier
under 1s of time, reaching 1M instructions limit.
The program is a simplified reproducer from syzbot report.
Previous discussion could be found at [1].
The patch does not cause any changes in verification performance,
when tested on selftests from veristat.cfg and cilium programs taken
from [2].
[1] https://lore.kernel.org/bpf/20241009021254.2805446-1-eddyz87@gmail.com/
[2] https://github.com/anakryiko/cilium
Changelog:
- v1 -> v2:
- moved patch to bpf tree;
- moved force_new_state variable initialization after declaration and
shortened the comment.
v1: https://lore.kernel.org/bpf/20241018020307.1766906-1-eddyz87@gmail.com/
Fixes: 2589726d12 ("bpf: introduce bounded loops")
Reported-by: syzbot+7e46cdef14bf496a3ab4@syzkaller.appspotmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20241029172641.1042523-1-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/670429f6.050a0220.49194.0517.GAE@google.com/
Commit 98442f0ccd ("sched: Fix delayed_dequeue vs
switched_from_fair()") overlooked that __setscheduler_prio(), now
__setscheduler_class() relies on p->policy for task_should_scx(), and
moved the call before __setscheduler_params() updates it, causing it
to be using the old p->policy value.
Resolve this by changing task_should_scx() to take the policy itself
instead of a task pointer, such that __sched_setscheduler() can pass
in the updated policy.
Fixes: 98442f0ccd ("sched: Fix delayed_dequeue vs switched_from_fair()")
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
