Commit Graph

1646 Commits

Author SHA1 Message Date
Cristina Moraru
920dad0ce3 iio: si7020: add support for Hoperf th06
This patch adds support for Hoperf th06 humidity and
temperature sensor as it uses same register definitions
as si7020

th06 Datasheet: http://www.hoperf.com/upload/sensor/TH06.pdf

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:15 +00:00
Cristina Moraru
3f4202652e iio: si7005: add support for Hoperf th02
This patch adds support for Hoperf th02 humidity and
temperature sensor as it uses same register definitions
as si7005

th02 Datasheet: http://www.anglia-live.com/netalogue/pdfs/hrf/datasheets/TH02_V1.1.pdf

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:15 +00:00
Jonathan Cameron
21cb454dc7 iio:pressure:Kconfig white space cleanup.
Clearly a high degree of cut and paste has gone on in this file, propogating
a particularly random combination of tabs and spaces.  This patch at least
should make it all consistent going forward.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:14 +00:00
Harald Geyer
155a57593d iio: dht11: Simplify decoding algorithm
The new algorithm uses a 'one size fits em all' threshold, which should
be easier to understand and debug. I believe there are no regressions
compared to the old adaptive threshold algorithm. I don't remember why
I chose the old algorithm when I initially wrote the driver.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:13 +00:00
Harald Geyer
22acc120a1 iio: dht11: Improve reliability - be more tolerant about missing start bits
Instead of guessing where the data starts, we now just try to decode from
every possible start position. This causes no additional overhead if we
properly received the full preamble and only costs a few extra CPU cycles
in the case where the preamble is corrupted. This is much more efficient
than to return an error to userspace and start over again.

Signed-off-by: Harald Geyer <harald@ccbib.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:13 +00:00
Akinobu Mita
c984b9cbbd iio: pressure: mpl115: support MPL115A1
mpl115 driver currently supports i2c interface (MPL115A2).
There is also SPI version (MPL115A1).  The difference between them
is only physical transport so we can easily support both while sharing
most of the code.

Split the driver into a core support module and one module each for I2C
and SPI support.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:12 +00:00
Akinobu Mita
0b767b3188 iio: pressure: mpl115: don't set unused i2c clientdata
mpl115 sets i2c clientdata, but it is not used anywhere.  So remove it.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:27:11 +00:00
Alexander Koch
ac663db367 iio: light: opt3001: enable operation w/o IRQ
Enable operation of the TI OPT3001 light sensor without having an
interrupt line available to connect the INT pin to.

In this operation mode, we issue a conversion request and simply wait
for the conversion time available as timeout value, determined from
integration time configuration and the worst-case time given in the data
sheet (sect. 6.5, table on p. 5):

  short integration time (100ms): 110ms + 3ms = 113ms
   long integration time (800ms): 880ms + 3ms = 883ms

This change is transparent as behaviour defaults to using the interrupt
method if an interrupt no. is configured via device tree. Interrupt-less
operation mode is performed when no valid interrupt no. is given.

Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:26:47 +00:00
Alexander Koch
84e8d090c5 iio: light: opt3001: trivial type refactoring
Change variable type of struct opt3001 members 'ok_to_ignore_lock' and
'result_ready' uint16-bitfield of length one to bool.

They are used as bool, let the compiler do the optimization.

Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:26:33 +00:00
Alexander Koch
564cff826f iio: light: opt3001: extract int. time constants
Extract integration times as #define constants. This prepares using them
for delay/timeout length determination.

Signed-off-by: Alexander Koch <mail@alexanderkoch.net>
Signed-off-by: Michael Hornung <mhornung.linux@gmail.com>
Tested-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-30 16:26:12 +00:00
Ricardo Ribalda Delgado
131497acd8 iio: add ad5761 DAC driver
ad5761 is a 1-channel DAC with configurable output range.
The driver uses the regulator interface for its voltage ref.

It shares its register layout with ad5761r, ad5721 and ad5721r.

Differences:
ad5761* are 16 bit, ad5721* are 12 bits.
ad57*1r have an internal reference.

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-24 14:46:21 +00:00
Colin Ian King
7ca6574a7a iio: adc: axp288: remove redundant duplicate const on axp288_adc_channels
duplicate const can be removed, it is redundant. Found by static
analysis using smatch.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:30:57 +00:00
Martin Kepplinger
244a93f651 iio: mma8452: add support for MMA8451Q
This adds support for this series' 14 bit accelerometer chip, MMA8451Q.
It's datasheet is available at the vendor's website:

https://cache.freescale.com/files/sensors/doc/data_sheet/MMA8451Q.pdf

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:28:52 +00:00
Martin Kepplinger
36775d5701 iio: mma8452: whitespace cleanup
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:28:27 +00:00
Martin Kepplinger
4b04266abe iio: mma8452: add freefall detection for Freescale's accelerometers
This adds freefall event detection to the supported devices. It adds
the in_accel_x&y&z_mag_falling_en iio event attribute, which activates
freefall mode.

In freefall mode, the current acceleration magnitude (AND combination
of all axis values) is compared to the specified threshold.
If it falls under the threshold (in_accel_mag_falling_value),
the appropriate IIO event code is generated.

This is what the sysfs "events" directory for these devices looks
like after this change:

-rw-r--r--    4096 Oct 23 08:45 in_accel_mag_falling_period
-rw-r--r--    4096 Oct 23 08:45 in_accel_mag_falling_value
-rw-r--r--    4096 Oct 23 08:45 in_accel_mag_rising_period
-rw-r--r--    4096 Oct 23 08:45 in_accel_mag_rising_value
-r--r--r--    4096 Oct 23 08:45 in_accel_scale
-rw-r--r--    4096 Oct 23 08:45 in_accel_x&y&z_mag_falling_en
-rw-r--r--    4096 Oct 23 08:45 in_accel_x_mag_rising_en
-rw-r--r--    4096 Oct 23 08:45 in_accel_y_mag_rising_en
-rw-r--r--    4096 Oct 23 08:45 in_accel_z_mag_rising_en

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:27:35 +00:00
Ludovic Desroches
61be8fde63 iio:adc:at91-sama5d2: code cleanup
Use var type for sizeof argument instead of the struct name.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:17:11 +00:00
Ludovic Desroches
d7bdcc3f57 iio:adc:at91-sama5d2: fix vref_uv type
vref_uv has to be an int.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-23 16:15:29 +00:00
Akinobu Mita
4ea71e5cee iio: adc: mcp320x: support more differential voltage measurement
mcp320x driver supports the pseudo-differential mode by
in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (0, 1), (2, 3), ...

mcp320x chips except MCP3X01 can also select swapped IN+ and IN-
pairs in the pseudo-differential mode.
i.e. in_voltage'IN+'-voltage'IN-'_raw where (IN+, IN-) = (1, 0),
(3, 2), ...

If the voltage level of IN+ is equal to or less than IN-, the
resultant code will be 000h.  So it is useful to provide these, too.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Oskar Andero <oskar.andero@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-16 13:04:05 +00:00
Ludovic Desroches
b9cd7a254d MAINTAINERS: add entry for Atmel SAMA5D2 ADC driver
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-16 11:34:06 +00:00
Ludovic Desroches
27e1771908 iio:adc:at91_adc8xx: introduce new atmel adc driver
This driver supports the new version of the Atmel ADC device introduced
with the SAMA5D2 SoC family.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-16 11:27:02 +00:00
Julia Lawall
f78c5f9654 iio: ak8975: constify ak_def structures
The ak_def structures are never modified, so declare them as const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-10 12:35:33 +00:00
Linus Walleij
a9fd053b56 iio: st_sensors: support active-low interrupts
Most ST MEMS Sensors that support interrupts can also handle sending
an active low interrupt, i.e. going from high to low on data ready
(or other interrupt) and thus triggering on a falling edge to the
interrupt controller.

Set up logic to inspect the interrupt line we get for a sensor: if
it is triggering on rising edge, leave everything alone, but if it
triggers on falling edges, set up active low, and if unsupported
configurations appear: warn with errors and reconfigure the interrupt
to a rising edge, which all interrupt generating sensors support.

Create a local header for st_sensors_core.h to share functions
between the sensor core and the trigger setup code.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-10 12:35:32 +00:00
Matt Ranostay
b11a34607d iio: health: max30100: add config for LED current
Allow the current for both RED and IR LEDs to be set via an device tree
property setting.

This is an optional setting that is useful for applications that have a
known glass attenuation factor.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-03 17:59:49 +00:00
Akinobu Mita
35f739679a iio: dac: mcp4725: Add basic support for MCP4726
MCP4726 is a single channel 12-bit DAC.  We can support MCP4726 with
a little changes to mcp4725 driver.  In power-down mode, they have
different selection of VOUT pull-down registers.

MCP4726 also has features:
 - Output gain options: 1x, 2x
 - Voltage reference selection: VDD, VREF (Unbuffered or Buffered)

But these are not supported in this change. (1x gain, VDD is selected)

datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22272C.pdf

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-03 17:42:59 +00:00
Akinobu Mita
505abf99c7 iio: adc: mcp3422: Add support for MCP3425
The MCP3425 is a single channel up to 16-bit A/D converter which has
features:

- On-Board Programmable Gain Amplifier (PGA):
 - Gains of 1, 2, 4 or 8
- Programmable Data Rate Options:
 - 15 SPS (16 bits), 60 SPS (14 bits), 240 SPS (12 bits)

The mcp3422 driver also supports the MCP3421 which is a single channel.
So we can support MCP3425 with a little changes to mcp3422 driver.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-01-02 18:32:03 +00:00
Greg Kroah-Hartman
02c34ccc1d Third set of new stuff for IIO in the 4.5 cycle.
New driver features
 - us5182
   * Add interrupt support and rising / falling threshold events.
 
 Cleanups / fixes to new stuff / minor additions
 * Expose the IIO value formatting function for drivers to
   make use of internally.
 - ina2xx
    * Fix wrong channel order
    * Fix incorrect reporting of endianness
    * Adding documentation of ABI unique to this device
 - mma8452
   * Drop an unused register description
   * Use an enum for the channel index to aid readability
 - sca3000
   * Use standard NULL comparison style
 - us5182
   * fix an inconsistency in status of enable (a bug with no real effect until
     above patches are applied)
   * refactor the read_raw function to improve maintainability / readability.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWeZ3IAAoJEFSFNJnE9BaIT2UP/3+VlQzBFrg1pBqLCR4xqMHB
 9gUBInzgBwmzpmAqD9pkvyG5f9fTz7hSqX2IGkAA1V6I91H2cunEROSGyhFd4VBW
 vhUhpz9WpRyx+8yLE3fQKUU/UmZJWTI7Xyladwrk3k87OOdcfn3wjtUdTuAhD5SW
 OWzW9txC5dAgSEC5yhqD8VdXN6tRL/eEOEFawHlf9f7bBr9DuyhECp6aIP79gKAS
 pynUPe3R5Uk/GuXdKX6zEWim4XZxhQR0oRmtrdCPIbauK6/ENDOWcaAvgS3mcN8i
 KJ/L27hQGc5zjR8VzysZzZw+7Edc4EqY2UvhA19+0RN93064s0qvR8hoEMp0bHP/
 MKGtwHv8MiqKfdCqIdimf6aT2GILTVWWx8WjyrM0O0+h444ba3ETRPGQ4mYNohuN
 Gt7FFv345aiFh2lQw8Rb54H2d19KV2hwUar3CTpRcl9OhOEnD3ulfDvQghzNlbXl
 nUh5dSOK+yDmXPPMEeZU4pYKG8rNaNZ1FxvVFy/yvUgytD1uqQDnWZ3b1gR0DiV9
 56ucUcrSg74LSqC8R/D6BXb+73LPBTmpu60iGvOQsUYcnmJSdnmEobWCnSXGjFXR
 I2e/H/ZOL4+dyHVpoyfQIiDpe6rGgYQHxyQ/kojWn2NxCJpgUufuR6jPTJ9GMF7k
 eckCq5cDb0nmmg45EQq0
 =aiE2
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.5c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third set of new stuff for IIO in the 4.5 cycle.

New driver features
- us5182
  * Add interrupt support and rising / falling threshold events.

Cleanups / fixes to new stuff / minor additions
* Expose the IIO value formatting function for drivers to
  make use of internally.
- ina2xx
   * Fix wrong channel order
   * Fix incorrect reporting of endianness
   * Adding documentation of ABI unique to this device
- mma8452
  * Drop an unused register description
  * Use an enum for the channel index to aid readability
- sca3000
  * Use standard NULL comparison style
- us5182
  * fix an inconsistency in status of enable (a bug with no real effect until
    above patches are applied)
  * refactor the read_raw function to improve maintainability / readability.
2015-12-26 17:05:25 -08:00
Greg Kroah-Hartman
35ea984dac Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.
The big one here is the configfs support which has been a long time in the
 works but should allow for cleaner ways to do instantiation of those elements
 of IIO that aren't directly connected to specific hardware. Lots of cool new
 stuff we can use this for in the works!
 
 New core stuff (basically all configfs support related)
 * Configfs support
   - Core support (was waiting for a configfs patch that went in around 4.4rc2)
   - A little fixlet to add a configfs.h to contain a reference to the
     configfs_subsystem structure.
 * Some infrastructure to simplify handling of software based triggers
   (i.e. ones with no actual hardware associated with them)
 * A high resolution timer based trigger.  This has been around for years
     but until the configfs support was ready we didn't have a sensible way
     of instantiating instances of it (the method used for the sysfs_trigger
     has never been really satisfactory)
 
 New Device Support
 * AMS iAQ Volatile Organic Compounds sensor support.
 * Freescale imx7d ADC driver
 * Maxim MAX30100 oximeter driver (note that for these devices most of the
   smart stuff will be in userspace - effectively they are just light sensors
   with some interesting led synchronization as far as the kernel is concerned).
 * Microchip mcp3421 support added to the mcp3422 driver.
 * TI adc124s021 support added to the adc128s052 driver.
 * TI ina219, inda226 power monitors. Note that there is an existing hwmon driver
   for these parts, the usecase is somewhat different so it is unclear at this
   point if the hwmon driver will eventually be replaced by a bridge from
   this driver.  In the meantime the Kconfig dependencies should prevent both
   from being built.
 
 New driver functionality
 * us8152d power management support.
 
 Cleanups, fixups
 * Use list_for_each_entry_safe instead of list_for_each_safe with the entry
   bit coded longhand.
 * Select IRQ_WORK for IIO_DUMMY_EVGEN.  This is a fix that somehow got lost
   when the driver was moved so lets do it again.
 * st-accel - drop an unused define.
 * vz89x, lidar - optimize i2c transactions by using a single i2c tranfers
   instead of multiple calls where supported (fall back to smbus calls as
   before if not).
 * Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency
   drivers instead of direct access to the structure element.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJWbX6IAAoJEFSFNJnE9BaI6E4QAIvGXHn4ew8ZH+IF3UP+n47C
 WWtgeh7dEvhqpmXN3eWVo9bxA1JdwbE4/purWttszoJjzqowT0qAt6PuIUME+Md4
 3jOQ41Sc99YjttIwkLpWTqq3H5c3Tn3q9guZ3Imiz9rmpgHRePQ8aatMGUpOp53m
 AEY5JQHqCoWHLMEbEy/5w8RJdNf3cy3Re4kjtwrtp7CMynC4ob7dKE7kcZRvywEw
 6m4hVOQusLvygg1j235czwBDnf79qYOo96z93Pk/auQlqKX3ce/7yQW3GXvWl97a
 8FOmse3FNzX3jwWHELOdAZWIQSLBSqP9N4716qa4orVSihzqAZQ5CSEBPB0r2LS2
 cgK4BL6+xjDkwXn9ui4FiyLdUeUjz/zRhvwFZdjwP63hGf5n9ggZO3RuVslc6/8z
 DOHY5mLdg8CFlMlZUCnCc+1BjU8lgf90+a46Vx4ACJJiqIJrvNRxRKGQZyY/C9sO
 O8h0Ep5mWovcK1+SWdQSsfxdcWcdb0nJFG/VQeJVxMeJR+5mD5lCYmIj5xFkOxJU
 WP9xm+7rsCqSPW+vp8hlY3EWunIQB4gWROvLzWCTS2bKW7B12t1UapLZBrI1f6vK
 JuqHrjKkK7RBRAEldKz6cWCToEaHE+I/k+uIRhlp0of2IPEvGpnm3NoPN1XH3RID
 9boPy/eHuShq8EVg0WUt
 =54PR
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.5b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO new drivers, functionality and cleanups for the 4.5 cycle.

The big one here is the configfs support which has been a long time in the
works but should allow for cleaner ways to do instantiation of those elements
of IIO that aren't directly connected to specific hardware. Lots of cool new
stuff we can use this for in the works!

New core stuff (basically all configfs support related)
* Configfs support
  - Core support (was waiting for a configfs patch that went in around 4.4rc2)
  - A little fixlet to add a configfs.h to contain a reference to the
    configfs_subsystem structure.
* Some infrastructure to simplify handling of software based triggers
  (i.e. ones with no actual hardware associated with them)
* A high resolution timer based trigger.  This has been around for years
    but until the configfs support was ready we didn't have a sensible way
    of instantiating instances of it (the method used for the sysfs_trigger
    has never been really satisfactory)

New Device Support
* AMS iAQ Volatile Organic Compounds sensor support.
* Freescale imx7d ADC driver
* Maxim MAX30100 oximeter driver (note that for these devices most of the
  smart stuff will be in userspace - effectively they are just light sensors
  with some interesting led synchronization as far as the kernel is concerned).
* Microchip mcp3421 support added to the mcp3422 driver.
* TI adc124s021 support added to the adc128s052 driver.
* TI ina219, inda226 power monitors. Note that there is an existing hwmon driver
  for these parts, the usecase is somewhat different so it is unclear at this
  point if the hwmon driver will eventually be replaced by a bridge from
  this driver.  In the meantime the Kconfig dependencies should prevent both
  from being built.

New driver functionality
* us8152d power management support.

Cleanups, fixups
* Use list_for_each_entry_safe instead of list_for_each_safe with the entry
  bit coded longhand.
* Select IRQ_WORK for IIO_DUMMY_EVGEN.  This is a fix that somehow got lost
  when the driver was moved so lets do it again.
* st-accel - drop an unused define.
* vz89x, lidar - optimize i2c transactions by using a single i2c tranfers
  instead of multiple calls where supported (fall back to smbus calls as
  before if not).
* Use dev_get_platdata() in staging drivers: tsl2x7x, adcs and frequency
  drivers instead of direct access to the structure element.
2015-12-26 17:03:33 -08:00
Jonathan Cameron
e8aab48b34 iio: adc: ina2xx: Fix incorrect report of data endianness to userspace.
This was extracted from a reposting of the driver after it had been applied
to the IIO tree.  I have fast tracked it as the driver will be in 4.5 and
it would be nice to fix this trivial issue before it is.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 18:51:27 +00:00
Adriana Reus
9b1de75b5d iio: light: us5182d: Refactor read_raw function
A bit of refactoring for better readability.
Moved and slightly reorganized all the activity necessary for reading als
and proximity into a different function. This way the switch in read raw
becomes clearer and more compact.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 18:07:08 +00:00
Adriana Reus
b6695254f8 iio: light: us5182d: Add interrupt support and events
Add interrupt support for proximity.
Add two threshold events to signal rising and falling directions.

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 18:07:05 +00:00
Adriana Reus
58e9042f5f iio: light: us5182d: Fix enable status inconcistency
When setting als only or proximity only modes make sure that we mark the
other component as disabled. This fix is in preparation of adding event
support because that will make it possible to switch between one-shot and
continuous modes and not tracking these correctly may cause faulty
behaviour (e.g wrongfully considering px enabled and not setting an
appropriate mode in the chip).

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 18:00:51 +00:00
Andrew F. Davis
7d2c2acac5 iio: Make IIO value formating function globally available.
Make IIO value formating function globally available to allow IIO drivers
to output values as the core does.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-22 17:04:56 +00:00
Martin Kepplinger
e60378c17c iio: mma8452: use enum for channel index
This gets rid of some magic numbers by adding an enum.

Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19 16:45:42 +00:00
Martin Kepplinger
8e34f2c8d2 iio: mma8452: remove unused register description
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19 16:44:56 +00:00
Marc Titinger
75e1a3a789 iio: ina2xx: fix channel order in software buffer
POWER and CURRENT were swapped out in the buffer:
was current2 and power3, correct order is power2 and current3.

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-19 15:06:28 +00:00
Greg Kroah-Hartman
93c222c0e1 Merge 4.4-rc5 into staging-next
We want those fixes in here for testing.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13 19:23:01 -08:00
Anshul Garg
c34c18195d iio/inkern.c Use list_for_each_entry_safe
Use list_for_each_entry_safe instead of list_for_each_safe
and list_entry call.

Signed-off-by: Anshul Garg <aksgarg1989@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 17:23:37 +00:00
Haibo Chen
16846ebeff iio: adc: add IMX7D ADC driver support
Freescale i.MX7D soc contains a new ADC IP. This patch add this ADC
driver support, and the driver only support ADC software trigger.

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:25:41 +00:00
Marc Titinger
46294cd948 iio: ina2xx: give the capture kthread a more useful name string.
PID  PPID USER     STAT   VSZ %VSZ %CPU COMMAND
  144     2 root     DW       0   0%  33% [ina226:1-8800us]
  141     2 root     DW       0   0%  25% [ina226:0-8800us]
   40     2 root     SW       0   0%  15% [irq/156-4802a00]
  147     2 root     DW       0   0%   7% [ina226:2-8800us]
  145     1 root     S     1236   0%   6% dd if /dev/iio:device1 of /dev/null
  148     1 root     S     1236   0%   4% dd if /dev/iio:device2 of /dev/null
  149   137 root     R     1244   0%   3% top -d 1
  142     1 root     S     1236   0%   2% dd if /dev/iio:device0 of /dev/null

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:08:37 +00:00
Marc Titinger
b17dc40155 iio: ina2xx: re-instate a sysfs show/store for the shunt resistor value
Different probe modules use different resistor values. The front-end
application may read a probe ID (from eeprom) and set the shunt value
accordingly.

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:08:13 +00:00
Marc Titinger
f9993c0771 iio: ina2xx: provide a sysfs parameter to allow async readout of the ADCs
This can lead to repeated or skipped samples depending on the clock beat
between the capture thread and the chip sampling clock, but will also spare
reading/waiting for the Capture Ready Flag and improve the available i2c
bandwidth for reading measurements.

Output of iio_info:
...snip...
4 device-specific attributes found:
  attr 0: in_oversampling_ratio value: 4
  attr 1: in_allow_async_readout value: 0
  attr 2: integration_time_available value: 140 204 332 588 1100 2116...
  attr 3: in_sampling_frequency value: 114

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:07:41 +00:00
Marc Titinger
c43a102e67 iio: ina2xx: add support for TI INA2xx Power Monitors
in SOFTWARE buffer mode, a kthread will capture the active scan_elements
into a kfifo, then compute the remaining time until the next capture tick
and do an active wait (udelay).

This will produce a stream of up to fours channels plus a 64bits
timestamps (ns).

Tested with ina226, on BeagleBoneBlack.

Datasheet: http://www.ti.com/lit/gpn/ina226

Signed-off-by: Marc Titinger <mtitinger@baylibre.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 16:07:36 +00:00
Matt Ranostay
466df4d0c1 iio: chemical: add AMS iAQ-core support
Add support for AMS iAQ-core continuous and pulsed VOC sensors.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 15:07:38 +00:00
Matt Ranostay
4d33615df5 iio: light: add MAX30100 oximeter driver support
MAX30100 is an heart rate and pulse oximeter sensor that works using
two LEDS of different wavelengths, and detecting the light reflected
back.

This patchset adds support for both IR and RED LED channels which can
be processed in userspace to determine heart rate and blood oxygen
levels.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 12:14:37 +00:00
Oliver Stäbler
b41fa86b67 iio:adc128s052: add support for adc124s021
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch>
Reviewed-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-12 12:08:17 +00:00
Arnd Bergmann
9ab655a32e staging: iio: select IRQ_WORK for IIO_DUMMY_EVGEN
The iio dummy code was recently changed to use irq_work_queue, but
that code is compiled into the kernel only if IRQ_WORK is set, so
we can get a link error here:

drivers/built-in.o: In function `iio_evgen_poke':
(.text+0x208a04): undefined reference to `irq_work_queue'

This changes the Kconfig file to match what other drivers do.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fd2bb310ca ("Staging: iio: Move evgen interrupt generation to irq_work")
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 17:33:39 +00:00
Robert Kmiec
ec0096f853 iio: st_accel_core: Remove unneeded define
Definition of ST_SENSORS_WAI_ADDRESS was introduced within a very
first commit of this driver, but it was never used.
This address is already defined as ST_SENSORS_DEFAULT_WAI_ADDRESS
in include/linux/iio/common/st_sensors.h

To avoid duplication of the same constant in two different places
called almost exactly the same, the one which was never used
should be removed.

Signed-off-by: Robert Kmiec <robert.r.kmiec@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 17:28:31 +00:00
Matt Ranostay
366e65633c iio: proximity: lidar: optimize i2c transactions
Optimize device tranactions using i2c transfers versus multiple
possibly racey i2c_smbus_* function calls, and only one transaction
for distance measurement. Falls back to smbus method if i2c
functionality isn't available.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-05 16:40:48 +00:00
Jonathan Cameron
8d6c16dd72 iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem
This exported element needs to be accesible to all drivers using configfs
within IIO.  Previously it was in the sw_trig.h file which only convered one
such usecase.  This also fixes a sparse warning as it is now in a header
that makes sense to include from industrialio-configfs.c

Signed-off-by: Jonathan Cameron < jic23@kernel.org>
2015-12-05 16:25:30 +00:00
Matt Ranostay
93e87d73cc iio: chemical: vz89x: rework i2c transfer reading
Add an optimized i2c transfer reading function, and fallback
to racey smbus transfers if client->adapter doesn't support this.

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-12-03 18:31:12 +00:00