Commit Graph

7814 Commits

Author SHA1 Message Date
Alex Deucher
2f1f4d9b60 Revert "drm/radeon: rework pll selection (v3)"
This reverts commit 985f61f7ee.

This commit fixed certain cases, but ended up regressing others
due to limitations in the current KMS API.  A proper fix is too
invasive for 3.6.  Push it back to 3.7.

Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-17 17:26:24 -04:00
Wang Xingchao
b98b601672 drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
Clear Audio Enable bit to trigger unsolicated event to notify Audio
Driver part the HDMI hot plug change. The patch fixed the bug when
remove HDMI cable the bit was not cleared correctly.

In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will
be set to trigger unsolicated event to notify Alsa driver the change.

intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after
remove the hdmi cable, here's debug log:

[  187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2
[  187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0

so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this
cause the eld infomation and pin presence doesnot update accordingly in alsa driver side.

This patch will also trigger unsolicated event to alsa driver to notify the hot plug event:

[  187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1
[  187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0

Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-17 10:13:02 +02:00
Chris Wilson
7e81a42e34 drm/i915: Reduce a pin-leak BUG into a WARN
Pin-leaks persist and we get the perennial bug reports of machine
lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that
the object cannot be pinned at that time it should prevent the driver from
locking up, and hopefully restore a semblance of working whilst still
leaving us a OOPS to debug.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-17 10:12:57 +02:00
Daniel Vetter
5b5896e4e1 drm/i915: enable lvds pin pairs before dpll on gen2
Otherwise things migt not work too well.

Breakage introduced in

commit eb1cbe4848
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 28 23:12:16 2012 +0200

    drm/i915: split PLL update code out of i9xx_crtc_mode_set

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@vger.kernel.org (for 3.5 only)
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-17 10:04:39 +02:00
Jerome Glisse
0b2443ed4e drm/edid: limit printk when facing bad edid
Limit printing bad edid information at one time per connector.
Connector that are connected to a bad monitor/kvm will likely
stay connected to the same bad monitor/kvm and it makes no
sense to keep printing the bad edid message.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-17 11:16:40 +10:00
Dave Airlie
610bd7da16 drm/nouveau: fix booting with plymouth + dumb support
We noticed a plymouth bug on Fedora 18, and I then
noticed this stupid thinko, fixing it fixed the problem
with plymouth.

Cc: stable@vger.kernel.org
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-14 15:45:01 +10:00
Christian König
f492c171a3 drm/radeon: make 64bit fences more robust v3
Only increase the higher 32bits if we really detect a wrap around.

v2: instead of increasing the higher 32bits just use the higher
    32bits from the last emitted fence.
v3: also use last emitted fence value as upper limit.

The intention of this patch is to make fences as robust as
they where before introducing 64bit fences. This is
necessary because on older systems it looks like the fence
value gets corrupted on initialization.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=51344

Should also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=54129
https://bugs.freedesktop.org/show_bug.cgi?id=54662
https://bugzilla.redhat.com/show_bug.cgi?id=846505
https://bugzilla.redhat.com/show_bug.cgi?id=845639

3.5 needs a separate patch due to changes in the
fence code.  Will send that out separately.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-13 16:17:49 -04:00
Alex Deucher
985f61f7ee drm/radeon: rework pll selection (v3)
For DP we can use the same PPLL for all active DP
encoders.  Take advantage of that to prevent cases
where we may end up sharing a PPLL between DP and
non-DP which won't work.  Also clean up the code
a bit.

v2: - fix missing pll_id assignment in crtc init
v3: - fix DP PPLL check
    - document functions
    - break in main encoder search loop after matching.
      no need to keep checking additional encoders.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=54471

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-09-13 16:17:49 -04:00
Dave Airlie
b65523283c Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes
Inki Dae writes:
- fix build warnings
- minor code cleanup
- remove non-standard format, DRM_FORMAT_NV12M
- add dummy mmap for exynos dmabuf
  . dma_buf export needs this patch

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm: Drop the NV12M and YUV420M formats
  drm/exynos: remove DRM_FORMAT_NV12M from plane module
  drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
  drm/exynos: add dummy support for dmabuf-mmap
  drm/exynos: Add missing braces around sizeof in exynos_mixer.c
  drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
  drm/exynos: Make g2d_pm_ops static
  drm/exynos: Add dependency for G2D in Kconfig
  drm/exynos: fixed page align bug.
  drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
  drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
  drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
  drm/exynos: Remove redundant check in exynos_drm_fimd.c file
  drm/exynos: Remove redundant check in exynos_hdmi.c file
2012-09-13 14:18:55 +10:00
Inki Dae
ece82d624c drm/exynos: remove DRM_FORMAT_NV12M from plane module
this patch removes DRM_FORMAT_NV12M from plane module because this format
is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by
mode_cmd->handles and mode_cmd->offsets fields internally.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
2012-09-13 12:38:10 +09:00
Mandeep Singh Baines
525ee699f0 drm/exynos: fix double call of drm_prime_(init/destroy)_file_private
The double invocations are incorrect but seem to be safe so I don't
think this will fix any bugs.

Before:

[    7.639366] drm_prime_init_file ee3675d0
[    7.639377] drm_prime_init_file ee3675d0
[    7.639507] drm_prime_destroy_file ee3675d0
[    7.639518] drm_prime_destroy_file ee3675d0
[    7.639802] drm_prime_init_file ee372390
[    7.639810] drm_prime_init_file ee372390
[    8.473316] drm_prime_init_file ee356390
[    8.473331] drm_prime_init_file ee356390

After:

[    6.363842] drm_prime_init_file edc2e5d0
[    6.363994] drm_prime_destroy_file edc2e5d0
[    6.364260] drm_prime_init_file edc2e750
[    8.004837] drm_prime_init_file ee36ded0

Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:09 +09:00
Tomasz Stanislawski
b716d46e00 drm/exynos: add dummy support for dmabuf-mmap
This patch adds a stub function for DMABUF mmap.
This allows to export a DMABUF.

Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13 12:38:09 +09:00
Sachin Kamat
e25e1b6654 drm/exynos: Add missing braces around sizeof in exynos_mixer.c
Fixes the following checkpatch warnings:
WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8)
WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4)
WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:09 +09:00
Sachin Kamat
adc837ac3c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c
Fixes the following checkpatch warnings:
WARNING: sizeof *res should be sizeof(*res)
WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0])
WARNING: sizeof *res should be sizeof(*res)

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:09 +09:00
Sachin Kamat
9e1355e7d9 drm/exynos: Make g2d_pm_ops static
Fixes the following warning:
drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning:
symbol 'g2d_pm_ops' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:09 +09:00
Sachin Kamat
254d4d111e drm/exynos: Add dependency for G2D in Kconfig
Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver
is not selected.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13 12:38:08 +09:00
Inki Dae
7da5907c84 drm/exynos: fixed page align bug.
do not align in page unit at dumb creation. the align is done
by exynos_drm_gem_create() to be called commonly.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:08 +09:00
Thomas Meyer
4fbd9a4539 drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]
The semantic patch that makes this change is available
in scripts/coccinelle/api/err_cast.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:08 +09:00
Sachin Kamat
b767593349 drm/exynos: Use devm_* functions in exynos_drm_g2d.c file
devm_* functions are device managed functions and make error handling
and cleanup cleaner and simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:08 +09:00
Sachin Kamat
ae18294018 drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file
devm_kzalloc is a device managed function and makes freeing and error
handling simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:08 +09:00
Sachin Kamat
59848db505 drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file
devm_kzalloc is a device managed function and makes freeing and error
handling simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:07 +09:00
Sachin Kamat
16e197417d drm/exynos: Remove redundant check in exynos_drm_fimd.c file
devm_request_and_ioremap function checks the validity of the
pointer returned by platform_get_resource. Hence an additional check
in the probe function is not necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:07 +09:00
Sachin Kamat
7ba073cdd8 drm/exynos: Remove redundant check in exynos_hdmi.c file
devm_request_and_ioremap function checks the validity of the
pointer returned by platform_get_resource. Hence an additional check
in the probe function is not necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13 12:38:07 +09:00
Dave Airlie
5e1782d224 vmwgfx: add dumb ioctl support
Testing and works with the -modesetting driver,

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:42:31 +10:00
Emil Goode
09e7dcf081 gma500: Remove unused variable
This patch removes a unused struct psb_intel_connector

Sparse gives a warning:
drivers/gpu/drm/gma500/cdv_intel_hdmi.c:142:30: warning:
	unused variable ‘psb_intel_connector’ [-Wunused-variable]

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:40:05 +10:00
Alan Cox
26df641eac gma500: Fix regression on Oaktrail devices
The register map patches didn't set one value for the GMA600 which
means the Fujitsu Q550 dies on boot with the GMA500 driver enabled.

Add the map entry so we don't read from the device MMIO + 0 by mistake.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Horses <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:36:29 +10:00
Wei Yongjun
3a9950781c vmwgfx: remove useless set memory to zero use memset()
The memory return by kzalloc() or kmem_cache_zalloc() has already
be set to zero, so remove useless memset(0).

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:34:34 +10:00
Shirish S
cd004b3f4c drm: edid: add support for E-DDC
The current logic for probing ddc is limited to
2 blocks (256 bytes), this patch adds support
for the 4 block (512) data.

To do this, a single 8-bit segment index is
passed to the display via the I2C address 30h.
Data from the selected segment is then immediately
read via the regular DDC2 address using a repeated
I2C 'START' signal.

Signed-off-by: Shirish S <s.shirish@samsung.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:28:59 +10:00
Robert P. J. Day
93eb58d53f drm: Remove unnecessary test for ARM.
Since arch/arm/include/asm/pgtable.h contains:

#define io_remap_pfn_range(vma,from,pfn,size,prot) \
                remap_pfn_range(vma, from, pfn, size, prot)

there is no point treating ARM as a special case in distinguishing
between remap_pfn_range() and io_remap_pfn_range().

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:28:39 +10:00
Andy Shevchenko
9a6a4b4757 drm: use %*ph to dump small buffers
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:28:30 +10:00
Ville Syrjälä
14f77fdd58 drm: edid: Refactor HDMI VSDB detection
There are two slightly different pieces of code for HDMI VSDB
detection. Unify the code into a single helper function.

Also fix a bug where drm_detect_hdmi_monitor() would stop looking
for the HDMI VSDB after the first vendor specific block is found,
whether or not that block happened to be the HDMI VSDB. The
standard allows for any number of vendor specific blocks to be
present.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:23:11 +10:00
Ville Syrjälä
8504072a2a drm: edid: Add bounds checking to HDMI VSDB parsing
The length of HDMI VSDB must be at least 5 bytes. Other than the minimum,
nothing else about the length is specified. Check the length before
accessing any additional field beyond the minimum length.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:22:30 +10:00
Ville Syrjälä
9e50b9d55e drm: edid: Add some bounds checking
Make sure drm_detect_hdmi_monitor() and drm_detect_monitor_audio() don't
access beyond the extension block.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:21:36 +10:00
Russell King - ARM Linux
4a1897d268 drm: consistently name interlaced modes
At the moment, there is an inconsistency in the way modes are named.
Modes with timings parsed from the EDID information will call
drm_mode_set_name(), which will name the mode using this form:

	<horizontal-res>x<vertical-res><interlace-char>

eg, 1920x1080i for an interlaced mode, or 1920x1080 for a progressive
mode.

However, timings parsed using the tables in drm_edid_modes.h do not
have the 'i' suffix.  You are left to deduce that they're interlaced
from xrandr's output by the lower vertical refresh frequencies.

This patch changes the interlaced mode names in drm_edid_modes.h to
follow the style set by drm_mode_set_name(), which makes it clear
in xrandr which modes are interlaced and which are not (as xrandr
groups the refresh rates on a line according to the name field.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:21:03 +10:00
David Herrmann
fb30edf5e4 drm: make buffer management work without DRM_MASTER
DRM users should be able to create/destroy/manage dumb- and frame-buffers
without DRM_MASTER. These ioctls do not affect modesetting so there is no
reason to protect them by drm-master. Particularly, destroying buffers
should always be possible as a client has only access to buffers that they
created. Hence, there is no reason to prevent a client from destroying the
buffers, considering a simple close() would destroy them, anyway.

Furthermore, a display-server currently cannot shutdown correctly if it
does not have DRM_MASTER. If some other display-server becomes active (or
the kernel console), then the background display-server is unable to
destroy its buffers.
Under special curcumstances (like monitor reconfiguration) this might even
happen during runtime.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13 11:19:44 +10:00
Dave Airlie
6426a7b0d9 Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:
"Nothing really major at all:
- fixup edp setup sequence (Dave)
- disable sdvo hotplug for real, this is a fixup for a messed-up
  regression fixer (Jani)
- don't expose dysfunctional backlight driver (Jani)
- properly init spinlock (only used by hsw/vlv code) from Alexander
  Shishkin"
along with a couple of more fixes on top.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: fix up the IBX transcoder B check
  drm/i915: set the right gen3 flip_done mode also at resume
  drm/i915: initialize dpio_lock spin lock
  drm/i915: do not expose a dysfunctional backlight interface to userspace
  drm/i915: only enable sdvo hotplug irq if needed
  drm/i915/edp: get the panel delay before powering up
2012-09-13 11:07:31 +10:00
Daniel Vetter
75c5da279e drm/i915: fix up the IBX transcoder B check
This has been added in

commit de9a35abb3
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Jun 5 11:03:40 2012 +0200

    drm/i915: assert that the IBX port transcoder select w/a is implemented

Unfortunately I've failed to notice that these checks are not just
called for the port that is about to be disabled, but for all (which
makes sense for an assert ...), and the WARN missfired when disabling
another pipe than the one with the dp port.

Hence also check whether the port is actually disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-11 17:25:14 +02:00
Daniel Vetter
974a3b0f9f drm/i915: set the right gen3 flip_done mode also at resume
Currently we've only frobbed this bit at irq_init time, but did
not restore it at resume time. Move it to the gen3 clock gating
function to fix this.

Notice while reading through code.

Cc: stable@vger.kernel.org (for 3.5 only)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-10 21:30:03 +02:00
Alexander Shishkin
99d0b1db6c drm/i915: initialize dpio_lock spin lock
This thing is killing lockdep.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
[Jani: move the init next to the other spin lock inits]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-08 19:04:04 +02:00
Daniel Vetter
e04190e0ec drm/fb helper: don't call drm_helper_connector_dpms directly
Yet again a case where the fb helper is too intimate with the crtc
helper and calls a crtc helepr function directly instead of going
through the interface vtable.

This fixes console blanking in drm/i915 with the new i915-specific
modeset code.

Reported-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-08 00:51:15 +02:00
Dave Airlie
c4903429a9 drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot
This will cause udev to load vmwgfx instead of waiting for X
to do it.

Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-07 13:25:34 +10:00
Dave Airlie
5d2afab958 drm/vmwgfx: allow a kconfig option to choose if fbcon is enabled
This makes things easier for distros where we'd like to have fbcon
enabled all the time.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-07 13:24:34 +10:00
Daniel Vetter
a1ceb67751 Merge the modeset-rework, basic conversion into drm-intel-next
As a quick reference I'll detail the motivation and design of the new code a
bit here (mostly stitched together from patchbomb announcements and commits
introducing the new concepts).

The crtc helper code has the fundamental assumption that encoders and crtcs can
be enabled/disabled in any order, as long as we take care of depencies (which
means that enabled encoders need an enabled crtc to feed them data,
essentially).

Our hw works differently. We already have tons of ugly cases where crtc code
enables encoder hw (or encoder->mode_set enables stuff that should only be
enabled in enocder->commit) to work around these issues. But on the disable
side we can't pull off similar tricks - there we actually need to rework the
modeset sequence that controls all this. And this is also the real motivation
why I've finally undertaken this rewrite: eDP on my shiny new Ivybridge
Ultrabook is broken, and it's broken due to the wrong disable sequence ...

The new code introduces a few interfaces and concepts:

- Add new encoder->enable/disable functions which are directly called from the
crtc->enable/disable function. This ensures that the encoder's can be
enabled/disabled at a very specific in the modeset sequence, controlled by our
platform specific code (instead of the crtc helper code calling them at a time
it deems convenient).

- Rework the dpms code - our code has mostly 1:1 connector:encoder mappings and
does support cloning on only a few encoders, so we can simplify things quite a
bit.

- Also only ever disable/enable the entire output pipeline. This ensures that
we obey the right sequence of enabling/disabling things, trying to be clever
here mostly just complicates the code and results in bugs. For cloneable
encoders this requires a bit of special handling to ensure that outputs can
still be disabled individually, but it simplifies the common case.

- Add infrastructure to read out the current hw state. No amount of careful
ordering will help us if we brick the hw on the initial modeset setup. Which
could happen if we just randomly disable things, oblivious to the state set up
by the bios. Hence we need to be able to read that out. As a benefit, we grow a
few generic functions useful to cross-check our modeset code with actual hw
state.

With all this in place, we can copy&paste the crtc helper code into the
drm/i915 driver and start to rework it:

- As detailed above, the new code only disables/enables an entire output pipe.
As a preparation for global mode-changes (e.g. reassigning shared resources) it
keeps track of which pipes need to be touched by a set of bitmasks.

- To ensure that we correctly disable the current display pipes, we need to
know the currently active connector/encoder/crtc linking. The old crtc helper
simply overwrote these links with the new setup, the new code stages the new
links in ->new_* pointers. Those get commited to the real linking pointers once
the old output configuration has been torn down, before the ->mode_set
callbacks are called.

- Finally the code adds tons of self-consistency checks by employing the new hw
state readout functions to cross-check the actual hw state with what the
datastructure think it should be. These checks are done both after every
modeset and after the hw state has been read out and sanitized at boot/resume
time. All these checks greatly helped in tracking down regressions and bugs in
the new code.

With this new basis, a lot of cleanups and improvements to the code are now
possible (besides the DP fixes that ultimately made me write this), but not yet
done:

- I think we should create struct intel_mode and use it as the adjusted mode
everywhere to store little pieces like needs_tvclock, pipe dithering values or
dp link parameters. That would still be a layering violation, but at least we
wouldn't need to recompute these kinds of things in intel_display.c. Especially
the port bpc computation needed for selecting the pipe bpc and dithering
settings in intel_display.c is rather gross.

- In a related rework we could implement ->mode_valid in terms of ->mode_fixup
in a generic way - I've hunted down too many bugs where ->mode_valid did the
right thing, but ->mode_fixup didn't. Or vice versa, resulting in funny bugs
for user-supplied modes.

- Ditch the idea to rework the hdp handling in the common crtc helper code and
just move things to i915.ko. Which would rid us of the ->detect crtc helper
dependencies.

- LVDS wire pair and pll enabling is all done in the crtc->mode_set function
currently. We should be able to move this to the crtc_enable callbacks (or in
the case of the LVDS wire pair enabling, into some encoder callback).

Last, but not least, this new code should also help in enabling a few neat
features: The hw state readout code prepares (but there are still big pieces
missing) for fastboot, i.e. avoiding the inital modeset at boot-up and just
taking over the configuration left behind by the bios. We also should be able
to extend the configuration checks in the beginning of the modeset sequence and
make better decisions about shared resources (which is the entire point behind
the atomic/global modeset ioctl).

Tested-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Damien Lespiau <damien.lespiau@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Acked-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Acked-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Tested-by: Jesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 22:52:43 +02:00
Daniel Vetter
b980514c9a drm/i915: improve modeset state checking after dpms calls
Now that we have solid modeset state tracking and checking code in
place, we can do the Full Monty also after dpms calls.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:31 +02:00
Daniel Vetter
8af6cf88a5 drm/i915: add tons of modeset state checks
... let's see whether this catches anything earlier and I can track
down a few bugs.

v2: Add more checks and also add DRM_DEBUG_KMS output so that it's
clear which connector/encoder/crtc is being checked atm. Which proved
rather useful for debugging ...

v3: Add a WARN in the common encoder dpms function, now that also
modeset changes properly update the dpms state ...

v4: Properly add a short explanation for each WARN, to avoid the need
to correlate dmesg lines with source lines accurately. Suggested by
Chris Wilson.

v5: Also dump (expected, found) for state checks (or wherever it's not
apparent from the test what exactly mismatches with expectations).
Again suggested by Chris Wilson.

v6: Due to an issue reported by Paulo Zanoni I've noticed that the
encoder checking is by far not as strict as it could and should be.
Improve this.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:30 +02:00
Daniel Vetter
9dc10f37e3 drm/i915: no longer call drm_helper_resume_force_mode
Since this only calls crtc helper functions, of which a shocking
amount are NULL.

Now the curious thing is how the new modeset code worked with this
function call still present:

Thanks to the hw state readout and the suspend fixes to properly
quiescent the register state, nothing is actually enabled at resume
(if the bios doesn't set up anything). Which means resume_force_mode
doesn't actually do anything and hence nothing blows up at resume
time.

The other reason things do work is that the fbcon layer has it's own
resume notifier callback, which restores the mode. And thanks to the
force vt switch at suspend/resume, that then forces X to restore it's
own mode.

Hence everything still worked (as long as the bios doesn't enable
anything). And we can just kill the call to resume_force_mode.

The upside of both this patch and the preceeding patch to quiescent
the modeset state is that our resume path is much simpler:
- We now longer restore bogus register values (which most often would
  enable the backlight a bit and a few ports), causing flickering.
- We now longer call resume_force_mode to restore a mode that the
  fbcon layer would overwrite right away anyway.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:30 +02:00
Daniel Vetter
a261b246eb drm/i915: disable all crtcs at suspend time
We need this to avoid confusing the hw state readout code with the cpt
pch plls at resume time: We'd read the new pipe state (which is
disabled), but still believe that we have a life pll connected to that
pipe (from before the suspend). Hence properly disable pipes to clear
out all the residual state.

This has the neat side-effect that we don't enable ports prematurely
by restoring bogus state from the saved register values.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:29 +02:00
Daniel Vetter
ea9d758d6d drm/i915: push commit_output_state past the crtc/encoder preparing
With this change we can (finally!) rip out a few of the temporary hacks
and clean up a few other things:
- Kill intel_crtc_prepare_encoders, now unused.
- Kill the hacks in the crtc_disable/enable functions to always call the
  encoder callbacks, we now always call the crtc functions with the right
  encoder -> crtc links.
- Also push down the crtc->enable, encoder and connector dpms state
  updates. Unfortunately we can't add a WARN in the crtc_disable
  callbacks to ensure that the crtc is always still enabled when
  disabling an output pipe - the crtc sanitizer of the hw readout path
  can hit this when it needs to disable an active pipe without any
  enabled outputs.
- Only call crtc->disable if the pipe is already enabled - again avoids
  running afoul of the new WARN.

v2: Copy&paste our own version of crtc_in_use, too.

v3: We need to update the dpms an encoder->connectors_active states,
too.

v4: I've forgotten to kill the unconditional encoder->disable calls in
the crtc_disable functions.

v5: Rip out leftover debug printk.

v6: Properly clear intel_encoder->connectors_active. This wasn't
properly cleared when disabling an encoder because it was no longer on
the new connector list, but the crtc was still enabled (i.e. switching
the encoder of an active crtc). Reported by Jani Nikula.

v7: Don't clobber the encoder->connectors_active state of untouched
encoders. Since X likes to first disable all outputs with dpms off
before setting a new framebuffer, this hit a few warnings. Reported by
Paulo Zanoni.

v8: Kill the now stale comment warning that intel_crtc->active is not
always updated at the right times.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:29 +02:00
Daniel Vetter
fc303101dc drm/i915: switch the load detect code to the staged modeset config
Now that set_mode also disables crtcs and expects it's new
configuration in the staged output links we need to adjust the load
detect code a bit.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:28 +02:00
Daniel Vetter
284637d922 drm/i915: WARN if the pipe won't turn off
This seems to be the symptom of a few neat bugs, hence be more
obnoxious when this fails.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:28 +02:00
Daniel Vetter
1f70385510 drm/i915: s/intel_encoder_disable/intel_encoder_noop
Because that's what it is. Unfortunately we can't rip this out because
the fb helper has an incetious relationship with the crtc helper - it
likes to call disable_unused_functions, among other things.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:27 +02:00
Daniel Vetter
976f8a2013 drm/i915: push commit_output_state past crtc disabling
This requires a few changes
- We still need a noop function for crtc->disable, becuase the fb
  helper is a bit too intimate with the crtc helper.
- We need to clear crtc->fb ourselves in intel_crtc_disable now that
  we no longer rely on the helper's disable_unused_functions to do
  that.
- We need to split out the sare update code, becuase the crtc code
  can't call update_dpms any more, it needs to disable the crtc
  unconditionally. This is because we now keep onto the encoder ->
  crtc mapping of the (still) active output pipe configuration.
- To check that we really disable a crtc that still has encoders,
  insert a WARN_ON(!enabled) in the crtc disable function.
- Lastly, we need to walk over all crtcs to update their enabled state
  after having called commit_output_state - for all disabled crtcs the
  crtc helper code has done that for us previously.

v2: Update connector dpms and encoder->connectors_active after
disabling the crtc, too.

v3: Noop-out intel_encoder_disable. Similarly to the crtc disable
callback used by the crtc helper code we can't simply remove all these
encoder callbacks: The fb helper (which we still use) has a rather
incetious relationship with the crtc helper code ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:27 +02:00
Daniel Vetter
25c5b2665f drm/i915: implement new set_mode code flow
... using the pipe masks from the previous patch.

Well, not quite:
- We still need to call the disable_unused_functions helper, until
  we've moved the call to commit_output_state further down and
  adjusted intel_crtc_disable a bit. The next patch will do that.
- Because we don't support (yet) mode changes on more than one crtc at
  a time, some of the modeset_pipes checks are a bit hackish - but
  that only needs fixing once we incorporate global modeset support.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:26 +02:00
Daniel Vetter
e2e1ed41ed drm/i915: compute masks of crtcs affected in set_mode
This is definetely a bit more generic than currently required, but if
we keep track of all crtcs that need to be disabled/enable (because
they loose an encoder or something similar), crtcs that get completely
disabled and those that we need to do an actual mode change nicely
prepares us for global modeset operations on multiple crtcs.

The only big thing missing here would be a global resource allocation
step (for e.g. pch plls), which would equally frob these bitmasks if
e.g. a crtc only needs a new pll. Or if we need to enable dithering on
an another pipe due to bandwidth constrains somewhere.

These masks aren't yet put to use in this patch, this will follow in the
next one.

v2-v5: Fix up the computations for good (hopefully).

v6: Fixup a confusion reported by Damien Lespiau: I've conserved the
(imo braindead) behaviour of the crtc helper to disable _any_
disconnected outputs if we do a modeset, even when that newly disabled
connector isn't connected to the crtc being changed by the modeset.

The effect of that is that we could disable an arbitrary number of
unrelated crtcs, which I haven't taken into account when writing this
code. Fix this up.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:21:26 +02:00
Daniel Vetter
e24c5c2900 drm/i915: use staged outuput config in lvds->mode_fixup
- Use the check_cloned helper from the previous patch.
- Use encoder->new_crtc to check crtc properties.

v2: Kill the double negation with s/!non_cloned/is_cloned, suggested
by Jesse Barnes.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:20:58 +02:00
Daniel Vetter
6ed0f796c2 drm/i915: use staged outuput config in tv->mode_fixup
The "is this encoder cloned" check will be reused by the lvds encoder,
hence exract it.

v2: Be a bit more careful about that we need to check the new, staged
ouput configuration in the check_non_cloned helper ...

v3: Kill the double negation with s/!non_cloned/is_cloned/, suggested
by Jesse Barnes.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:20:31 +02:00
Daniel Vetter
7758a11340 drm/i915: extract adjusted mode computation
While at it, adjust a few things:
- Only assigng the new mode to crtc->mode right before calling the
  mode_set callbacks - none of the previous callbacks depend upon
  this, they all use the mode argument (as they should).
- Check encoder->new_crtc instead of the current crtc to check whether
  the encoder will be used. This prepares for moving the staged output
  committing further down in the sequence. Follow-on patches will fix
  up individual ->mode_fixup callbacks (only tv and lvds are affected
  though).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:04:38 +02:00
Daniel Vetter
87f1faa630 drm/i915: move output commit and crtc disabling into set_mode
It's rather pointless to compute crtc->enabled twice right away ;-)

The only thing we really have to be careful about is that we frob the
dpms state only after a successful modeset and when we've actually
haven't just disabled the crtc.

Hooray for convoluted interfaces ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:04:23 +02:00
Daniel Vetter
ba1c28c900 drm/i915: remove crtc disabling special case
Originally this has been introduced in

commit 6eebd6bb5f
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Nov 28 21:10:05 2011 +0000

    drm: Fix lack of CRTC disable for drm_crtc_helper_set_config(.fb=NULL)

With the improvements of the output state staging and no longer
overwriting crtc->fb before the hw state is updated we can now handle
crtc disabling as part of the normal modeset sequence.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:03:39 +02:00
Daniel Vetter
94352cf9a5 drm/i915: push crtc->fb update into pipe_set_base
Passing in the old fb, having overwritten the current fb, leads to
some neatly convoluted code. It's much simpler if we defer the
crtc->fb update to the place that updates the hw, in pipe_set_base.
This way we also don't need to restore anything in case something
fails - we only update crtc->fb once things have succeeded.

The real reason for this change is that now we keep the old fb
assigned to crtc->fb, which allows us to finally move the crtc disable
case into the common low-level set_mode function in the next patch.

Also don't clobber crtc->x and crtc->y, we neatly pass these down the
callchain already. Unfortunately we can't do the same with crtc->mode,
because that one is being used in the mode_set callbacks.

v2: Don't restore the drm_crtc object any more on failed modesets,
since we've lose an fb reference otherwise. Also (and this is the
reason this has been found), this totally confused the modeset state
tracking, since it clobbers crtc->enabled. Issue reported by Paulo
Zanoni.

v3: Rip out the entire crtc saving into struct intel_set_config, not
just the restoring part.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:03:10 +02:00
Daniel Vetter
9a93585699 drm/i915: stage modeset output changes
This is the core of the new modeset logic.

The current code which is based upon the crtc helper code first
updates all the link of the new display pipeline and then calls the
lower-level set_mode function to execute the required callbacks to get
there. The issue with this approach is that for disabling we need to
know the _current_ display pipe state, not the new one.

Hence we need to stage the new state of the display pipe and only
update it once we have disabled the current configuration and before we
start to update the hw registers with the new configuration.

This patch here just prepares the ground by switching the new output
state computation to these staging pointers. To make it clearer,
rename the old update_output_state function to stage_output_state.

A few peculiarities:
- We're also calling the set_mode function at various places to update
  properties. Hence after a successfule modeset we need to stage the
  current configuration (for otherwise we might fall back again). This
  happens automatically because as part of the (successful) modeset we
  need to copy the staged state to the real one. But for the hw
  readout code we need to make sure that this happens, too.
- Teach the new staged output state computation code the required
  smarts to handle the disabling of outputs. The current code handles
  this in a special case, but to better handle global modeset changes
  covering more than one crtc, we want to do this all in the same
  low-level modeset code.
- The actual modeset code is still a bit ugly and wants to know the new
  crtc->enabled state a bit early. Follow-on patches will clean that
  up, for now we have to apply the staged output configuration early,
  outside of the set_mode functions.
- Improve/add comments in stage_output_state.

Essentially all that is left to do now is move the disabling code into
set_mode and then move the staged state update code also into
set_mode, at the right place between disabling things and calling the
mode_set callbacks for the new configuration.

v2: Disabling a crtc works by passing in a NULL mode or fb, userspace
doesn't hand in the list of connectors. We therefore need to detect
this case manually and tear down all the output links.

v3: Properly update the output staging pointers after having read out
the hw state.

v4: Simplify the code, add more DRM_DEBUG_KMS output and check a few
assumptions with WARN_ON. Essentially all things that I've noticed
while debugging issues in other places of the code.

v4: Correctly disable the old set of connectors when enabling an
already enabled crtc on a new set of crtc. Reported by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:02:57 +02:00
Daniel Vetter
1aa4b628ee drm/i915: don't save all the encoder/crtc state in set_config
We actually only touch the connector -> encoder and encoder -> crtc
linking. So it's enough to just save/restore that.

While at it, also switch to kcalloc to allocate these arrays (omission
in the commit message spotted by Jesse Barnes).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:02:40 +02:00
Daniel Vetter
8d3e375e77 drm/i915: convert pointless error checks in set_config to BUGs
Because they all are, the ioctl command never calls us with any of
these violated. Also drop a equally pointless empty debug message (and
also in set_cursor, while we're at it).

With all these changes, intel_crtc_set_config is neatly condensed down
to it's essence, the actual modeset code (or fb update calling code)

v2: The fb helper code is actually stretching ->set_config semantics a bit,
it calls it with set->mode == NULL but set->fb != NULL.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:02:17 +02:00
Daniel Vetter
835c5873d6 drm/i915: don't update the fb base if there is no fb
Otherwise we'll set_fb complains pretty loudly if we the crtc is off
and userspace moves the NULL fb around a bit. Yeah, this actually
happens in the wild ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:02:07 +02:00
Daniel Vetter
431e50f799 drm/i915: implement crtc helper semantics relied upon by the fb helper
Yikes!

But yeah, we have to do this until someone volunteers to clean up the
fb helper and rid it of its incetious relationship with the crtc
helper code.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:01:31 +02:00
Daniel Vetter
2e43105183 drm/i915: extract intel_set_config_update_output_state
Note that this function already clobbers the mode config state,
so we have to clean things up if something fails.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:01:12 +02:00
Daniel Vetter
5e2b584ed1 drm/i915: extract intel_set_config_compute_mode_changes
This computes what exactly changed in the modeset configuration, i.e.
whether a full modeset is required or only an update of the
framebuffer base address or no change at all.

In the future we might add more checks for e.g. when only the output
mode changed, so that we could do a minimal modeset for outputs that
support this. Like the lvds/eDP panels where we only need to update
the panel fitter.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:01:07 +02:00
Daniel Vetter
85f9eb71fe drm/i915: extract modeset config save/restore code
At the end this won't be of much use to us, but meanwhile just extract
it to get a better overview of what exactly set_config does.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:00:51 +02:00
Daniel Vetter
d9e55608cd drm/i915: introduce struct intel_set_config
intel_crtc_set_config is an unwidly beast and is in serious need of
some function extraction. To facilitate that, introduce a struct to
keep track of all the state involved. Atm it doesn't do much more than
keep track of all the allocated memory.

v2: Apply some bikeshed to intel_set_config_free, as suggested by
Jesse Barnes.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:00:32 +02:00
Daniel Vetter
7fad798e16 drm/i915: ensure the force pipe A quirk is actually followed
Many BIOSen forget to turn on the pipe A after resume (because they
actually don't turn on anything), so we have to do that ourselves when
sanitizing the hw state.

I've discovered this due to the recent addition of a pipe WARN that
takes the force quirk into account.

v2: Actually try to enable the pipe with a proper configuration instead
of simpyl switching it on with whatever random state the bios left it
in after resume.

v3: Fixup rebase conflict - the load_detect functions have lost their
encoder argument.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:00:14 +02:00
Daniel Vetter
24e804ba97 drm/i915: rip out intel_dp->dpms_mode
We now track the connector state in encoder->connectors_active, and
because the DP output can't be cloned, that is sufficient to track the
link state. Hence use this instead of adding yet another modeset state
variable with dubious semantics at driver load and resume time.

Also, connectors_active should only ever be set when the encoder is
linked to a crtc, hence convert that crtc test into a WARN.

v2: Rebase on top of struct intel_dp moving.

v3: The rebase accidentally killed the newly-introduced intel_dp->port
Noticed by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:00:05 +02:00
Daniel Vetter
84bb65bded drm/i915: rip out intel_crtc->dpms_mode
Afaict this has been used for two things:
- To prevent the crtc enable code from being run twice. We have now
  intel_crtc->active to track this in a more precise way.
- To ensure the code copes correctly with the unknown hw state after
  boot and resume. Thanks to the hw state readout and sanitize code we
  have now a better way to handle this.

The only thing it still does is complicate our modeset state space.

Having outlived its usefullness, let it just die.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 08:00:00 +02:00
Daniel Vetter
0a91ca2921 drm/i915: check connector hw/sw state
Atm we can only check the connector state after a dpms call - while
doing modeset with the copy&pasted crtc helper code things are too
ill-defined for proper checking. But the idea is very much to call
this check from the modeset code, too.

v2: Fix dpms check and don't presume that if the hw isn't on that it
must not be linked up with an encoder (it could simply be switched off
with the dpms state).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:59:42 +02:00
Daniel Vetter
2492935248 drm/i915: read out the modeset hw state at load and resume time
... instead of resetting a few things and hoping that this will work
out.

To properly disable the output pipelines at the initial modeset after
resume or boot up we need to have an accurate picture of which outputs
are enabled and connected to which crtcs. Otherwise we risk disabling
things at the wrong time, which can lead to hangs (or at least royally
confused panels), both requiring a walk to the reset button to fix.

Hence read out the hw state with the freshly introduce get_hw_state
functions and then sanitize it afterwards.

For a full modeset readout (which would allow us to avoid the initial
modeset at boot up) a few things are still missing:
- Reading out the mode from the pipe, especially the dotclock
  computation is quite some fun.
- Reading out the parameters for the stolen memory framebuffer and
  wrapping it up.
- Reading out the pch pll connections - luckily the disable code
  simply bails out if the crtc doesn't have a pch pll attached (even
  for configurations that would need one).

This patch here turned up tons of smelly stuff around resume: We
restore tons of register in seemingly random way (well, not quite, but
we're not too careful either), which leaves the hw in a rather
ill-defined state: E.g. the port registers are sometimes
unconditionally restore (lvds, crt), leaving us with an active
encoder/connector but no active pipe connected to it. Luckily the hw
state sanitizer detects this madness and fixes things up a bit.

v2: When checking whether an encoder with active connectors has a crtc
wire up to it, check for both the crtc _and_ it's active state.

v3:
- Extract intel_sanitize_encoder.
- Manually disable active encoders without an active pipe.

v4: Correclty fix up the pipe<->plane mapping on machines where we
switch pipes/planes. Noticed by Chris Wilson, who also provided the
fixup.

v5: Spelling fix in a comment, noticed by Paulo Zanoni

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:59:24 +02:00
Daniel Vetter
732ce74f4a drm/i915/dvo: implement get_hw_state
Similar to the sdvo code we poke the dvo encoder whether the output is
active. Safe that dvo encoders are not standardized, so this requires
a new callback into the dvo chip driver.

Hence implement that for all 6 dvo drivers.

v2: With the newly added ns2501 we now have 6 dvo drivers instead of
just 5 ...

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:52 +02:00
Daniel Vetter
4ac41f47f8 drm/i915/sdvo: implement get_hw_state
SDVO is the first real special case - we support multiple outputs on
the same encoder and the encoder dpms state isn't the same as when
just disabling the outputs when the encoder is cloned.

Hence we need a real connector get_hw_state function which inquires
the sdvo encoder about its active outputs.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:47 +02:00
Daniel Vetter
e403fc941a drm/i915/crt: implement get_hw_state
Note that even though this connector is cloneable we still can use the
exact same test to check whether the connector is on or whether the
encoder is enabled - both the dpms code and the encoder disable/enable
frob the exact same hw state.

For dvo/sdvo outputs, this will be different.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:37 +02:00
Daniel Vetter
b1dc332c4d drm/i915/lvds: implement get_hw_state
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:33 +02:00
Daniel Vetter
9a8ee983e0 drm/i915/tv: implement get_hw_state
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:28 +02:00
Daniel Vetter
85234cdc28 drm/i915/hdmi: implement get_hw_state
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:22 +02:00
Daniel Vetter
19d8fe1544 drm/i915/dp: implement get_hw_state
Also add some macros to make the pipe computation a bit easier.

v2: I've mixed up the CPT and !CPT PORT_TO_PIPE macro variants ...

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:58:18 +02:00
Daniel Vetter
f0947c376f drm/i915: Add interfaces to read out encoder/connector hw state
It is all glorious if we try really hard to only enable/disable an
entire display pipe to ensure that everyting happens in the right
order. But if we don't know the output configuration when the driver
takes over, this will all be for vain because we'll make the hw angry
right on the first modeset - we don't know what outputs/ports are
enabled and hence have to disable everything in a rather ad-hoc way.

Hence we need to be able to read out the current hw state, so that we
can properly tear down the current hw state on the first modeset.
Obviously this is also a nice preparation for the fastboot work, where
we try to avoid the modeset on driver load if it matches what the hw
is currently using.

Furthermore we'll be using these functions to cross-check the actual
hw state with what we think it should be, to ensure that the modeset
state machine actually works as advertised.

This patch only contains the interface definitions and a little helper
for the simple case where we have a 1:1 encoder to connector mapping.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:51 +02:00
Daniel Vetter
08a4846969 drm/i915: WARN when trying to enabled an unused crtc
This is the first tiny step towards cross-checking the entire modeset
state machine with WARNs. A crtc can only be enabled when it's
actually in use, i.e. crtc->active imlies crtc->enabled.

Unfortunately we can't (yet) check this when disabling the crtc,
because the crtc helpers are a bit slopy with updating state and
unconditionally update crtc->enabled before changing the hw state.

Fixing that requires quite some more work.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:45 +02:00
Daniel Vetter
dbf2b54e78 drm/i915: call crtc functions directly
Instead of going through the crtc helper function tables.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:40 +02:00
Daniel Vetter
c9deac9776 drm/i915: rip out encoder->prepare/commit
With the new infrastructure we're doing this when enabling/disabling
the entire display pipe.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:19 +02:00
Daniel Vetter
821112aa41 drm/i915: simplify intel_crtc_prepare_encoders
- We don't have the ->get_crtc callback.
- Call intel_encoder->disable directly.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:57:03 +02:00
Daniel Vetter
a6778b3cfd drm/i915: copy&paste drm_crtc_helper_set_mode
Together with the static helper functions drm_crtc_prepare_encoders
and drm_encoder_disable (which will be simplified in the next patch,
but for now are 1:1 copies). Again, no changes beside new names for
these functions.

Also call our new set_mode instead of the crtc helper one now in all
the places we've done so far.

v2: Call the function just intel_set_mode to better differentia it
from intel_crtc_mode_set which really only does the ->mode_set step of
the entire modeset sequence on one crtc. Whereas this function does
the global change.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:56:54 +02:00
Daniel Vetter
6d832d189b drm/i915: inline intel_best_encoder
Also kill the error-path, we have a fixed connector->encoder mapping.

Unfortunately we can't rip out all the ->best_encoder callbacks, these
are all still used by the fb_helper. Neat helper layering violation there.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:56:35 +02:00
Daniel Vetter
4f660f49b9 drm/i915: call set_base directly
And drop the check, we always have it.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:56:11 +02:00
Daniel Vetter
50f56119ef drm/i915: copy&paste drm_crtc_helper_set_config
And the following static functions required by it:
drm_encoder_crtc_ok, drm_crtc_helper_disable

No changes safe for the s/drm/intel prefix change.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:56:00 +02:00
Daniel Vetter
61b77ddda6 drm/i915: clean up encoder_prepare/commit
We no longer need them. And now that all encoders are converted, we
can finally move the cpt modeset check to the right place - at the end
of the crtc_enable function.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:49 +02:00
Daniel Vetter
fa5c73b1b2 drm/i915: rip out encoder->disable/enable checks
All encoders are now converted so there's no need for these checks any
more.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:27 +02:00
Daniel Vetter
b2cabb0e1d drm/i915: convert dpms functions of dvo/sdvo/crt
Yeah, big patch but I couldn't come up with a neat idea of how to
split it up further, that wouldn't break dpms on cloned configs
somehow. But the changes in dvo/sdvo/crt are all pretty much
orthonogal, so it's not too bad a patch.

These are the only encoders that support cloning, which requires a few
special changes compared to the previous patches.
- Compute the desired state of the display pipe by walking all
  connected encoders and checking whether any has active connectors.
  To make this clearer, drop the old mode parameter to the crtc dpms
  function and rename it to intel_crtc_update_dpms.
- There's the curious case of intel_crtc->dpms_mode. With the previous
  patches to remove the overlay pipe A code and to rework the load
  detect pipe code, the big users are gone. We still keep it to avoid
  enabling the pipe twice, but we duplicate this logic with
  crtc->active, too. Still, leave this for now and just push a fake
  dpms mode into it that reflects the state of the display pipe.

Changes in the encoder dpms functions:
- We clamp the dpms state to the supported range right away. This is
  escpecially important for the VGA outputs, where only older hw
  supports the intermediate states. This (and the crt->adpa_reg patch)
  allows us to unify the crt dpms code again between all variants
  (gmch, vlv and pch).
- We only enable/disable the output for dvo/sdvo and leave the encoder
  running. The encoder will be disabled/enabled when we switch the
  state of the entire output pipeline (which will happen right away
  for non-cloned setups). This way the duplication is reduced and
  strange interaction when disabling output ports at the wrong time
  avoided.

The dpms code for all three types of connectors contains a bit of
duplicated logic, but I think keeping these special cases separate is
simpler: CRT is the only one that hanldes intermediate dpms state
(which requires extra logic to enable/disable things in the right
order), and introducing some abstraction just to share the code
between dvo and sdvo smells like overkill. We can do that once someone
bothers to implement cloning for the more modern outputs. But I doubt
that this will ever happen.

v2: s/crtc/crt/_set_dpms, noticed by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:17 +02:00
Daniel Vetter
19c63fa807 drm/i915/dvo: convert to encoder disable/enable
Similar to the sdvo conversion.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:11 +02:00
Daniel Vetter
ce22c320b8 drm/i915/sdvo: convert to encoder disable/enable
Similar to crt, this doesn't convert the dpms functions.
Also similar to crt, we don't switch of the display pipe
for the intermediate modes, only DPMS_OFF is truely off.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:55:03 +02:00
Daniel Vetter
2124604b09 drm/i915/crt: convert to encoder disable/enable
CRT is the first output which can be cloned, hence we cannot (yet)
move the dpms handling over to disable/enable. This requires some more
smarts in intel_crtc_dpms first to set the display pipe status
depening upon encoder->connectors_active of all connected encoders.

Because that will happen in a separate step, don't touch the dpms
functions, yet.

v2: Be careful about clearing the _DISABLE flags for intermediate dpms
modes - otherwise we might clobber the crt state when another (cloned)
connector gets enabled.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:54:27 +02:00
Daniel Vetter
e8cb455876 drm/i915/dp: convert to encoder disable/enable
DP is the first encoder which isn't simple. As

commit d240f20f54
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Aug 13 15:43:26 2010 -0700

    drm/i915: make sure eDP PLL is enabled at the right time

discovered, we need to enable the eDP PLL for the cpu port _before_ we
enable the pipes and planes. After a few more commits the current
solution is to enable the PLL in the dp mode_set function (because
this is the only encoder callback the crtc helper code calls before it
calls the crtc's commit function).

Now I suspect that we actually should enable/disable the entire cpu
eDP port before/after planes, but thanks to how the crtc helper code
assumes that you can disable an encoder without disabling it's crtc
right away, this won't work.

The result is that the current prepare/commit hooks don't touch the
eDP PLL, but instead it get's frobbed in dp_mode_set and in the dp
dpms function. Hence we need to keep things (at least for now)
bug-for-bug compatible by using our own special dp dpms function and
keep everything else more-or-less as-is (just using our own
infrastrucutre now).

This mess can only be cleaned up once we control the entire modeset
sequence and can move things around freely.

v2: Squash unsupported dpms modes to OFF at the beginning of the DP
dpms function.

v3: Need to set the dpms state to off in dp_disable, otherwise this
breaks the newly added WARNs ...

v4: Rebased against edp panel off sequence changes in 3.6-rc2

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:54:21 +02:00
Daniel Vetter
c22834ecbb drm/i915/lvds: convert to encoder disable/enable
With the previous patch LVDS is also a simple case. Treat it
accordingly.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:54:15 +02:00
Daniel Vetter
6b5756a046 drm/i915/tv: convert to encoder enable/disable
Like hdmi tv outputs are simple: They only have 2 states and can't be
cloned. Hence give it the same treatment.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:54:10 +02:00
Daniel Vetter
5ab432ef49 drm/i915/hdmi: convert to encoder->disable/enable
I've picked hdmi as the first encoder to convert because it's rather
simple:
- no cloning possible
- no differences between prepare/commit and dpms off/on switching.

A few changes are required to do so:
- Split up the dpms code into an enable/disable function and wire it
  up with the intel encoder.
- Noop out the existing encoder prepare/commit functions used by the
  crtc helper - our crtc enable/disable code now calls back into the
  encoder enable/disable code at the right spot.
- Create new helper functions to handle dpms changes.
- Add intel_encoder->connectors_active to better track dpms state. Atm
  this is unused, but it will be useful to correctly disable the
  entire display pipe for cloned configurations. Also note that for
  now this is only useful in the dpms code - thanks to the crtc
  helper's dpms confusion across a modeset operation we can't (yet)
  rely on this having a sensible value in all circumstances.
- Rip out the encoder helper dpms callback, if this is still getting
  called somewhere we have a bug. The slight issue with that is that
  the crtc helper abuses dpms off to disable unused functions. Hence
  we also need to implement a default encoder disable function to do
  just that with the new encoder->disable callback.
- Note that we drop the cpt modeset verification in the commit
  callback, too. The right place to do this would be in the crtc's
  enable function, _after_ all the encoders are set up. But because
  not all encoders are converted yet, we can't do that. Hence disable
  this check temporarily as a minor concession to bisectability.

v2: Squash the dpms mode to only the supported values -
connector->dpms is for internal tracking only, we can hence avoid
needless state-changes a bit whithout causing harm.

v3: Apply bikeshed to disable|enable_ddi, suggested by Paulo Zanoni.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:53:37 +02:00
Daniel Vetter
ef9c3aee60 drm/i915: add direct encoder disable/enable infrastructure
Just prep work, not yet put to some use.

Note that because we're still using the crtc helper to switch modes
(and their complicated way to do partial modesets), we need to call
the encoder's disable function unconditionally.

But once this is cleaned up we shouldn't call the encoder's disable
function unconditionally any more, because then we know that we'll
only call it if the encoder is actually enabled. Also note that we
then need to be careful about which crtc we're filtering the encoder
list on: We want to filter on the crtc of the _current_ mode, not the
one we're about to set up.

For the enabling side we need to do the same trick. And again, we
should be able to simplify this quite a bit when things have settled
into place.

Also note that this simply does not take cloning into account, so dpms
needs to be handled specially for the few outputs where we even bother
with it.

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:53:16 +02:00
Daniel Vetter
eae307a530 drm/i915: rip out crtc prepare/commit indirection
Just impendance matching with the the crtc helper stuff.

... and somehow the design of this all ended up in this commit here,
too ;-)

The big plan is that this new set of crtc display_funcs take full
responsibility of modeset operations for the entire display output
pipeline (by calling down into object-specific callbacks and
functions). The platform-specific callbacks simply know best what the
proper order is.

This has the drawback that we can't do minimal change-overs any more
if a modeset just disables one encoder in a cloned configuration
(because we will only expose a disable/enable action that takes
down/sets up the entire crtc including all encoders). Imo that's the
only sane way to do it though:
- The use-case for this is pretty minimal, even when presenting (at
  least sane people) should use a dual-screen output so that you can
  see your notes on your panel. Clone mode is imo BS.
- With all the clone mode constrains, shared resources, and special
  ordering requirements (which differ even on the same platform
  sometimes for different outputs) there's no way we'd get this right
  for all cases. Especially since this is a under-used feature.
- And to top it off: On haswell even dp link re-training requires us
  to take down the entire display pipe - otherwise the chip dies.

So the only sane way is to do a full modeset on every crtc where the
output config changes in any way.

To support global modeset (i.e. set the configuration for all crtcs at
once) we'd then add one more function to allocate global and shared
objects in the best ways (e.g. fdi links, pch plls, ...). The crtc
functions would then simply use the pre-allocated stuff (and shouldn't
be able to fail, ever). We could even do all the object pinning in
there (and maybe try to defragment the global gtt if we fail)!

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:53:10 +02:00
Daniel Vetter
76e5a89c0a drm/i915: add crtc->enable/disable vfuncs insted of dpms
Because that's what we're essentially calling. This is the first step
in untangling the crtc_helper induced dpms handling mess we have - at
the crtc level we only have 2 states and the magic is just in
selecting which one (and atm there isn't even much magic, but on
recent platforms where not even the crt output has more than 2 states
we could do better).

Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-06 07:52:00 +02:00
Ben Widawsky
8c3f929b61 drm/i915: Enable some sysfs stuff without CONFIG_PM
The original patch was actually incorrect in stubbing out the sysfs for
l3 parity.
commit 5ab3633d69
Author: Hunt Xu <mhuntxu@gmail.com>
Date:   Sun Jul 1 03:45:07 2012 +0000

    drm/i915: make rc6 in sysfs functions conditional

Unfortunately Hunt didn't respond to my review comments, and Daniel
sucked in the patch again ignoring. Worst of all, I'm too lazy to write
the patch for what I originally wanted, which was to keep rc6 sysfs even
without CONFIG_PM. This simpler patch does enough to enable us to add
more sysfs entries though.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-05 23:26:29 +02:00
Keith Packard
804d74abe2 drm: use drm_compat_ioctl for 32-bit apps
Most of the DRM drivers appear to be missing the .compat_ioctl file
operation entry necessary for 32-bit application compatibility.

This patch  uses drm_compat_ioctl for all drivers which don't have
their own, and which are using drm_ioctl for .unlocked_ioctl.

This leaves drivers/gpu/drm/psb/psb_drv.c unchanged; it has a custom
.unlocked_ioctl and will presumably need a custom .compat_ioctl as
well.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-06 06:55:02 +10:00
Sedat Dilek
95ca19cf8c drm: udl: usb: Fix recursive Kconfig dependency
In drivers/usb/Kconfig "config USB_ARCH_HAS_HCD" is within "if USB_SUPPORT"
statement.

In drivers/gpu/drm/Kconfig "config DRM_USB" depends on USB_ARCH_HAS_HCD
but selects USB_SUPPORT which leads to the error for udl Kconfig:

$ yes "" | make oldconfig
scripts/kconfig/conf --oldconfig Kconfig
drivers/gpu/drm/udl/Kconfig:1:error: recursive dependency detected!
drivers/gpu/drm/udl/Kconfig:1:  symbol DRM_UDL depends on USB_ARCH_HAS_HCD
drivers/usb/Kconfig:76: symbol USB_ARCH_HAS_HCD depends on USB_SUPPORT
drivers/usb/Kconfig:58: symbol USB_SUPPORT is selected by DRM_USB
drivers/gpu/drm/Kconfig:22:     symbol DRM_USB is selected by DRM_UDL

Fix this by changing from select to depends on USB_SUPPORT in
"config DRM_USB".

This is a follow-up fix to df0b344300
in Dave's drm-next GIT branch.

[ v2: Restore old status, but change from select to depends on USB_SUPPORT ]

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-04 18:21:50 +10:00
Jani Nikula
28dcc2d60c drm/i915: do not expose a dysfunctional backlight interface to userspace
Previously intel_panel_setup_backlight() would create a sysfs backlight
interface with max brightness of 1 if it was unable to figure out the max
backlight brightness. This rendered the backlight interface useless.

Do not create a dysfunctional backlight interface to begin with.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 20:42:10 +02:00
Ben Widawsky
8dee3eea3c drm/i915: Never read FORCEWAKE
The same designer from the previous patch has told us to never read
FORCEWAKE. We only do this for the POSTING_READ(), so simply change that
to something within the same cacheline (for no reason in particular
other than it sounds nice). In the _mt case we can leverage
the gtfifodbg check for the POSTING_READ.

This partially reverts
commit 6af2d180f8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 26 16:24:50 2012 +0200

    drm/i915: fix forcewake related hangs on snb

v2: commit message, comments about posting read from (Daniel)

Note: vlv forcewake doesn't need any changes for this special
treatment since FORCEWAKE_VLV is in a totally different register
range, and the readback FORCEWAKE_ACK_VLV readback that follows is in
the same range.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Added note.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:28:32 +02:00
Ben Widawsky
057d386061 drm/i915: Change forcewake timeout to 2ms
A designer familiar with the hardware has stated that the forcewake
timeout can theoretically be as high as a little over 1ms. Therefore we
modify our code to use 2ms (appropriate fudge and because we don't want
to round down).

Hopefully this can't prevent spurious timeouts.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Chris Wilson <chris@chris-wilson.oc.uk>
[danvet: again fix conflict with vlv patch.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:28:28 +02:00
Ben Widawsky
0cc2764cc4 drm/i915: use cpu_relax() in wait_for_atomic
As part of the advice given to us from the hardware designers regarding
the maximum wait time on the forcewake handshake we need to move from us
granularity to ms granularity. In earlier patches to do this, Jani
noticed that wait_for_us was properly converted to use cpu_relax(), but
wait_for was not.

The issue has existed since the introduction of the macro:
commit 913d8d1100
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Aug 7 11:01:35 2010 +0100

    drm/i915: Ensure that while(INREG()) are bounded (v2)

CC: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:21:29 +02:00
Ben Widawsky
b67a4376d5 drm/i915: Extract forcewake ack timeout
It's used all over the place, and we want to be able to play around with
the value, apparently. Note that it doesn't touch other timeouts of the
same value (like gtfifo, and thread C0 wait).

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.oc.uk>
[danvet: fixup conflict with vlv forcewake patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:20:43 +02:00
Jani Nikula
5fa7ac9c9c drm/i915: fix sdvo hotplug support check and activation
The sdvo hotplug support check and activation has worked by coincidence for
TMDS0. The boolean value returned by intel_sdvo_supports_hotplug() was
masked with a bit shifted by device number, which also should have been one
of SDVO_OUTPUT_* bits instead. Boolean true masked with 1 shifted by 0 just
happened to match SDVO_OUTPUT_TMDS0...

Get hotplug support as a bit mask, check the correct bits for support, and
use the correct bits for activating hotplug support.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Simon Farnsworth <simon.farnsworth@onelan.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:30 +02:00
Jani Nikula
ff04b35af0 drm/i915: only enable sdvo hotplug irq if needed
Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik Köppl <dominik@devwork.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:29 +02:00
Chris Wilson
a2c7f6fd4d drm/i915: Convert remaining debugfs iterators over rings to for_each_ring()
For code consolidation and future maintainability.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-and-Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:29 +02:00
Daniel Vetter
8a038fd633 drm/i915: differ error message between forcwake timeouts
<ickle> danvet: in the force wake, both DRM_ERRORs have the same string.
<ickle> useful for .txt shrinkage, horrible for debugging

Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:28 +02:00
Daniel Vetter
5ab140a4ac drm/i915: align vlv forcewake with common lore
For some odd reasons, the vlv forcewake code is rather different from
all other platforms, with no clear justification. Adjust things:

- Don't check whether the gt is awake already (and bail out early), we
  need to grab a forcewake anyway. Otherwise the chip might go to
  sleep too early. And this would also screw up our forcewake
  accounting.
- Like all other platforms, check whether the gt has cleared the
  forcewake bit in the _ACK register before setting it again.
- Use _MASKED_BIT_ENABLE/DISABLE macros
- Only use bit0 of the forcewake reg, not all 16 bits.
- check the gtfifodb reg like on all other platforms in _put.
- Drop the POSTING_READs for consistency.

v2: Failure to git add ... again.

v3: Fixup the spelling fail a bit.

Tested-by: "Purushothaman, Vijay A" <vijay.a.purushothaman@intel.com>
Tested-by: "Widawsky, Benjamin" <benjamin.widawsky@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:28 +02:00
Daniel Vetter
be2cde9a6d drm/i915: add a tracepoint for gpu frequency changes
We've had and still have too many issues where the gpu turbo doesn't
quite to what it's supposed to do (or what we want it to do).

Adding a tracepoint to track when the desired gpu frequency changes
should help a lot in characterizing and understanding problematic
workloads.

Also, this should be fairly interesting for power tuning (and
especially noticing when the gpu is stuck in high frequencies, as has
happened in the past) and hence for integration into powertop and
similar tools.

Cc: Arjan van de Ven <arjan@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:27 +02:00
Daniel Vetter
20e4d407fb drm/ips: move drps/ips/ilk related variables into dev_priv->ips
Like with the equivalent change for gen6+ rps state, this helps in
clarifying the code (and in fixing a few places that have fallen through
the cracks in the locking review).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:27 +02:00
Paulo Zanoni
f39876317a drm/i915: add workarounds to gen7_render_ring_flush
From Bspec, Vol 2a, Section 1.9.3.4 "PIPE_CONTROL", intro section
detailing the various workarounds:

"[DevIVB {W/A}, DevHSW {W/A}]: Pipe_control with CS-stall bit
set must be issued before a pipe-control command that has the State
Cache Invalidate bit set."

Note that public Bspec has different numbering, it's Vol2Part1,
Section 1.10.4.1 "PIPE_CONTROL" there.

There's also a second workaround for the PIPE_CONTROL command itself:

"[DevIVB, DevVLV, DevHSW] {WA}: Every 4th PIPE_CONTROL command, not
counting the PIPE_CONTROL with only read-cache-invalidate bit(s) set,
must have a CS_STALL bit set"

For simplicity we simply set the CS_STALL bit on every pipe_control on
gen7+

Note that this massively helps on some hsw machines, together with the
following patch to unconditionally set the CS_STALL bit on every
pipe_control it prevents a gpu hang every few seconds.

This is a regression that has been introduced in the pipe_control
cleanup:

commit 6c6cf5aa9c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Jul 20 18:02:28 2012 +0100

    drm/i915: Only apply the SNB pipe control w/a to gen6

It looks like the massive snb pipe_control workaround also papered
over any issues on ivb and hsw.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: squashed both workarounds together, pimped commit message
with Bsepc citations, regression commit citation and changed the
comment in the code a bit to clarify that we unconditionally set
CS_STALL to avoid being hurt by trying to be clever.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:26 +02:00
Paulo Zanoni
b311150927 drm/i915: add workarounds directly to gen6_render_ring_flush
Since gen 7+ now run the new gen7_render_ring_flush function.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:26 +02:00
Paulo Zanoni
4772eaebcd drm/i915: add gen7_render_ring_flush
For now, just a copy of gen6_render_ring_flush. Different gens have
different workarounds, so we want different functions.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 10:09:25 +02:00
Daniel Vetter
85f9e50d81 drm/i915: move i915_get_extra_insdone out of CONFIG_DEBUG_FS block
Otherwise it just won't compile ...

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-03 18:06:37 +10:00
Jani Nikula
fcbc50da77 drm/i915: only enable sdvo hotplug irq if needed
Avoid constant wakeups caused by noisy irq lines when we don't even care
about the irq. This should be particularly useful for i945g/gm where the
hotplug has been disabled:

commit 768b107e4b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Fri May 4 11:29:56 2012 +0200

    drm/i915: disable sdvo hotplug on i945g/gm

v2: While at it, remove the bogus hotplug_active read, and do not mask
hotplug_active[0] before checking whether the irq is needed, per discussion
with Daniel on IRC.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442
Tested-by: Dominik Köppl <dominik@devwork.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 09:43:36 +02:00
Dave Airlie
c1f05264d8 drm/i915/edp: get the panel delay before powering up
In order to setup the i2c channel, we power up the panel
via ironlake_edp_panel_vdd_on, however it requires
intel_dp->panel_power_up_delay to be initialised,
which hasn't been setup yet.

So move things around so we set the panel power up
values first then init the i2c stuff.

This is one step to fixing the eDP panel in the MBP
from uninitialised state.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03 09:43:25 +02:00
Dave Airlie
65983bd605 Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
"New stuff for -next. Highlights:
- prep patches for the modeset rework. Note that one of those patches
  touches the fb helper in the common drm code.
- hasw hdmi audio support (Wang Xingchao)
- improved instdone dumping for gen7 (Ben)
- unbound tracking and a few follow-up patches from Chris
- dma_buf->begin/end_cpu_access plus fix for drm/udl (Dave)
- improve mmio error reporting for hsw
- prep patch for WQ_NON_REENTRANT removal (Tejun Heo)
"

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (41 commits)
  drm/i915: Remove __GFP_NO_KSWAPD
  drm/i915: disable rc6 on ilk when vt-d is enabled
  drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
  drm/i915: Use new INSTDONE registers (Gen7+)
  drm/i915: Add new INSTDONE registers
  drm/i915: Extract reading INSTDONE
  drm/i915: Use a non-blocking wait for set-to-domain ioctl
  drm/i915: Juggle code order to ease flow of the next patch
  drm/i915: Use cpu relocations if the object is in the GTT but not mappable
  drm/i915: Extract general object init routine
  drm/i915: Protect private gem objects from truncate (such as imported dmabuf)
  drm/i915: Only pwrite through the GTT if there is space in the aperture
  i915: use alloc_ordered_workqueue() instead of explicit UNBOUND w/ max_active = 1
  drm/i915: Find unclaimed MMIO writes.
  drm/i915: Add ERR_INT to gen7 error state
  drm/i915: Cantiga+ cannot handle a hsync front porch of 0
  drm/i915: fix reassignment of variable "intel_dp->DP"
  drm/i915: Try harder to allocate an mmap_offset
  drm/i915: Show pin count in debugfs
  drm/i915: Show (count, size) of purgeable objects in i915_gem_objects
  ...
2012-09-03 12:05:01 +10:00
Dave Airlie
0273de08c4 drm/ast: drop debug level on error printk
This was never an error, drop to a debug print.

Reported-by: Keven Lachance
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-03 07:22:16 +10:00
Dave Airlie
f4fe968b61 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6 into drm-fixes
These two fix the MacBook Pro 2012 Retina display.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6:
  drm/nv50-/gpio: initialise to vbios defaults during init
  drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
2012-09-02 20:22:04 +10:00
Ben Skeggs
991083ba60 drm/nv50-/gpio: initialise to vbios defaults during init
This is required to fix an issue on the Retina MBP where the eDP panel's
AUX channel isn't wired up to the HPD pin for the panel, causing our aux
code to bail out early.

From looking at various traces of the binary driver, it appears NVIDIA do
something very similar on at least all nv50+ chipsets during their
initialisation sequence.  So, hopefully this is safe.

Issue and fix initially tracked down by Ryan Bourgeois on fdo#51971.

Backported fix from reworked nouveau kernel module.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-31 10:51:20 +10:00
Ben Skeggs
a348cd5fd8 drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
I have a very limited number of traces available for DP on NVD9+, but,
these values produce the same as the binary driver on a confirmed 18-bit
eDP panel and a confirmed 24-bit eDP panel (Retina MBP).

It's interesting that the bitfield values also match the MODE_CTRL values
that control the same thing on nv50:nvd9.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-31 10:49:38 +10:00
Paul Menzel
6f33814bd4 drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222S
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with
vertical stripes in the top half.

In commit bc42aabc [2]

        commit bc42aabc6a
        Author: Adam Jackson <ajax@redhat.com>
        Date:   Wed May 23 16:26:54 2012 -0400

            drm/edid/quirks: ViewSonic VA2026w

Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which
is also needed for this ASUS monitor.

All log files and output from `xrandr` is included in the referenced
Bugzilla report #17629.

Please note that this monitor only has a VGA (D-Sub) connector [1].

[1] http://www.asus.com/Display/LCD_Monitors/VW222S/
[2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Cc: <dri-devel@lists.freedesktop.org>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ian Pilcher <arequipeno@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30 14:14:12 +10:00
Dave Airlie
c1b51124b6 Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Alex writes:

Highlights:
- fix a gart regression on older IGP chips
- more MSAA fixes
- fix a double free in gpu reset code
- modesetting fixes
- trinity dig encoder fix.

* 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix dig encoder selection on DCE61
  drm/radeon: fix double free in radeon_gpu_reset
  drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
  drm/radeon: rework panel mode setup
  drm/radeon/atom: powergating fixes for DCE6
  drm/radeon/atom: rework DIG modesetting on DCE3+
  drm/radeon: don't disable plls that are in use by other crtcs
  drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
  drm/radeon: initialize tracked CS state
  drm/radeon: fix reading CB_COLORn_MASK from the CS
2012-08-30 10:35:34 +10:00
Forest Bond
4a68a74ba0 gma500: Consider CRTC initially active.
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug]

This causes the pipe to be forced off prior to initial mode set, which
roughly mirrors the behavior of the i915 driver.  It fixes initial mode
setting on my Intel DN2800MT (Cedarview) board.  Without it, mode
setting triggers an out-of-range error from the monitor for most modes,
but only on initial configuration (i.e. they can be configured
successfully from userspace after that).

Signed-off-by: Forest Bond <forest.bond@rapidrollout.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30 10:33:53 +10:00
Alex Deucher
41fa543770 drm/radeon: fix dig encoder selection on DCE61
Was using the DCE41 code which was wrong. Fixes
blank displays on a number of Trinity systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 19:57:34 -04:00
Christian König
f54b350d89 drm/radeon: fix double free in radeon_gpu_reset
radeon_ring_restore is freeing the memory for the saved
ring data. We need to remember that, otherwise we try to
restore the ring data again on the next try. Additional
to that it shouldn't try the reset infinitely if we have
saved ring data.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Jerome Glisse
4a2b6662c3 drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740
It seems some of those IGP dislike non dma32 page despite what
documentation says. Fix regression since we allowed non dma32
pages. It seems it only affect some revision of those IGP chips
as we don't know which one just force dma32 for all of them.

https://bugzilla.redhat.com/show_bug.cgi?id=785375

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Alex Deucher
0ceb996c9e drm/radeon: rework panel mode setup
Adjust the panel mode setup to match the behavior
of the vbios.  Rather than checking for specific
bridge chip ids, just check the eDP configuration register.
This saves extra aux transactions and works across
DP bridge chips without requiring additional per chip
id checking.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:01 -04:00
Alex Deucher
c205b232a6 drm/radeon/atom: powergating fixes for DCE6
Power gating is per crtc pair, but the powergating registers
should be called individually.  The hw handles power up/down
properly.  The pair is powered up if either crtc in the pair
is powered up and the pair is not powered down until both
crtcs in the pair are powered down.  This simplifies
programming and should save additional power as the previous
code never actually power gated the crtc pair.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 12:11:01 -04:00
Alex Deucher
8d1af57ae3 drm/radeon/atom: rework DIG modesetting on DCE3+
The ordering is important and the current drm code
wasn't cutting it for modern DIG encoders.  We need
to have information about crtc before setting up
the encoders so I've shifted the ordering a bit.
Probably we'll need a full rework akin to danvet's
recent intel patchs.  This patch fixes numerous
issues with DP bridge chips and makes link training
much more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2012-08-29 12:11:01 -04:00
Alex Deucher
4e58591c89 drm/radeon: don't disable plls that are in use by other crtcs
Some plls are shared for DP.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
523885dec1 drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700
Checking of the second colorbuffer was skipped on r700, because
CB_TARGET_MASK was 0xf. With r600, CB_TARGET_MASK is changed to 0xff,
so we must set the number of samples of the second colorbuffer to 1 in order
to pass the CS checker.
The DRM version is bumped, because RESOLVE_BOX is always rejected without this
fix on r600.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
3b5ef597ec drm/radeon: initialize tracked CS state
This should help catch uninitialized registers and reject commands
because of that.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Marek Olšák
305a3d204a drm/radeon: fix reading CB_COLORn_MASK from the CS
Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29 12:11:00 -04:00
Dave Airlie
84f720ecba Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:

"Just a few smaller things:
- Fix up a pipe vs. plane confusion from a refactoring, fixes a regression
  from 3.1 (Anhua Xu).
- Fix ivb sprite pixel formats (Vijay).
- Fixup ppgtt pde placement for machines where the Bios artifically limits
  the availbale gtt space in the name of ... product differentiation
  (Chris). This fixes an oops.
- Yet another no_lvds quirk entry."

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  i915: Quirk no_lvds on Gigabyte GA-D525TUD ITX motherboard
  drm/i915: Use the correct size of the GTT for placing the per-process entries
  drm/i915: fix color order for BGR formats on IVB
  drm/i915: fix wrong order of parameters in port checking functions
2012-08-29 20:09:23 +10:00
Dave Airlie
f08859a9b0 Merge branch 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Ben says its just a single fix to avoid the wrong pcopy units being used.

* 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
  drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
2012-08-29 20:05:40 +10:00
Ben Skeggs
14f0458a41 drm/nvc0/copy: check PUNITS to determine which copy engines are disabled
On some Fermi chipsets (NVCE particularly) PCOPY1 doesn't exist.  And if
what I've seen on Kepler is true of Fermi too, chipsets of the same type
can have different PCOPY units available.

This should fix a v3.5 regression reported by a number of people effecting
suspend/resume on NVC8/NVCE chipsets.

Cc: stable@vger.kernel.org [3.5]
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-29 13:21:41 +10:00
Sedat Dilek
d7c3b937bd drm/i915: Remove __GFP_NO_KSWAPD
When I pulled-in today's drm-intel-next into linux-next (next-20120824)
I saw this build-breakage:

drivers/gpu/drm/i915/i915_gem.c: In function 'i915_gem_object_get_pages_gtt':
drivers/gpu/drm/i915/i915_gem.c:1778:40: error: '__GFP_NO_KSWAPD' undeclared (first use in this function)
drivers/gpu/drm/i915/i915_gem.c:1778:40: note: each undeclared identifier is reported only once for each function it appears in

This is caused by commit ba099ef165f8 ("mm: remove __GFP_NO_KSWAPD")
and commit b6beae2c2014 ("mm: remove __GFP_NO_KSWAPD fixes") in
linux-next (next-20120824).

Fix this by removing __GFP_NO_KSWAPD from drm/i915 driver.

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-27 17:11:38 +02:00
Dave Airlie
93bb70e0c0 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
There was some merge conflicts in -next and they weren't so pretty, so
backmerge now to avoid them.

Conflicts:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_modes.c
2012-08-27 16:22:20 +10:00
Daniel Vetter
cd7988eea5 drm/i915: disable rc6 on ilk when vt-d is enabled
It blows up. And hopefully this is the root-cause of the mysterious
rc6 related hang on ilk. For reference, the commit that enabled rc6 on
ilk again is:

commit 456470eb58
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Aug 8 23:35:40 2012 +0200

    drm/i915: enable rc6 on ilk again

Reported-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-26 20:35:57 +02:00
Chris Wilson
7788a76520 drm/i915: Avoid unbinding due to an interrupted pin_and_fence during execbuffer
If we need to stall in order to complete the pin_and_fence operation
during execbuffer reservation, there is a high likelihood that the
operation will be interrupted by a signal (thanks X!). In order to
simplify the cleanup along that error path, the object was
unconditionally unbound and the error propagated. However, being
interrupted here is far more common than I would like and so we can
strive to avoid the extra work by eliminating the forced unbind.

v2: In discussion over the indecent colour of the new functions and
unwind path, we realised that we can use the new unreserve function to
clean up the code even further.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 21:02:51 +02:00
Ben Widawsky
050ee91f12 drm/i915: Use new INSTDONE registers (Gen7+)
Using the extracted INSTDONE reading, and our new register definitions,
update our hangcheck detection and error collection to use it. This
primarily means changing == to memcmp, and changing = to memcpy.
Hopefully this will give more info on error dump, and provide more
accurate hangcheck detection (both are actually TBD).

Also, remove the reading of instdone1 from the ring error collection
function, and just crap everything in capture_error_state (that could be
split into a separate patch if it wasn't so trivial).

v2: Now assuming i915_get_extra_instdone does the memset we can clean up the
code a bit (Jani)

v3: use ARRAY_SIZE as requested earlier by Jani (didn't change sizeof)
Updated commit msg

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-24 16:58:36 +02:00