The WM8958 DSP controls all return 0 on successful write, not a boolean
value indicating if the write changed the value of the control. Fix this
by returning 1 after a change, there is already a check at the start of
each put() that skips the function in the case that there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org
Cc: stable@vger.kernel.org
The micfil driver prints out the IRQ numbers for each interrupt at error
level. This information is useful for debugging at best, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-22-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl_set_clock_params() is used only once and easily be folded into its
caller, do so.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-21-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The "fsl,shared-interrupt" property is undocumented and unnecessary.
Just pass IRQF_SHARED unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-20-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
FSL_MICFIL_RATES and FSL_MICFIL_FORMATS is only used once. Drop
the unnecesary indirection and use SNDRV_PCM_RATE_8000_48000 and
SNDRV_PCM_FMTBIT_S16_LE directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-19-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil driver doesn't use anything from imx-pcm.h. Drop its
inclusion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-18-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For the quality setting the quality setting register values are directly
exposed to the kcontrol and thus to userspace. This is unfortunate
because the register settings contains invalid bit combinations marked
as "N/A". For userspace it doesn't make much sense to be able to set
these just to see that the driver responds with "Please make sure you
select a valid quality." in the kernel log.
Work around this by adding get/set functions for the quality setting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-17-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The reference manual has this for calculating the micfil internal clock
divider:
MICFIL Clock rate
clkdiv = -----------------
8 * OSR * outrate
(with OSR == Oversampling Rate, outrate == output sample rate)
The driver first sets the MICFIL Clock rate to (outrate * 1024) and then
calculates back the clkdiv value from the above calculation.
Simplify this by using a fixed clkdiv value of 8 and set the MICFIL
Clock rate to (outrate * clkdiv * OSR * 8).
While at it drop disabling the clock before setting its rate. The MICFIL
module is disabled when the rate is changed and it is also resetted
before it is started again, so I doubt it's necessary to disable the
clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-16-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
get_pdm_clk() calculates the PDM clock based on the quality setting,
but really the PDM clock is independent of the quality, it's always
rate * 4 * micfil->osr. Just drop the function and do the calculation
in the caller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-15-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The OSR (OverSampling Rate) setting is set once to the default value
and never changed throughout the driver. Nevertheless the value is
read back from the register for further calculations. Just use the
default value because we know what we have written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-14-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The micfil hardware provides the microphone data on multiple successive
FIFO registers, one register per stereo pair. Also to work properly the
SDMA_DONE0_CONFIG_DONE_SEL bit in the SDMA engines SDMA_DONE0_CONFIG
register must be set. This patch provides the necessary information to
the SDMA engine driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-13-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX DMA drivers are device tree only, nothing in
include/linux/platform_data/dma-imx.h has platform_data in it, so move
the file to include/linux/dma/imx-dma.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220414162249.3934543-10-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Failed register accesses are really not expected in memory mapped
registers. When it fails then the register access itself is likely not
the reason, so no need to have extra error messages for each regmap
access. Just drop the error messages. This also fixes some places where
a return value is concatenated using 'ret |=' and then returned as
error value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-8-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead regmap_update_bits() use the simpler variants
regmap_[set|clear]_bits() where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-7-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Use GENMASK along with FIELD_PREP and FIELD_GET to access bitfields in
registers to straighten register access and to drop a lot of defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-6-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to have defines for the mask of single bits. Also shift is
unused. Drop all these unnecessary defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-5-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
All that the .set_sysclk hook in the micfil driver does is to pass
the sysclk frequency to fsl_micfil_set_mclk_rate(). This function
expects the sample rate as argument though, not any kind of sysclk
frequency. The resulting rate setting of the clock is overwritten
in hw_params anyway, so drop this altogether.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-4-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In get_pdm_clk() REG_MICFIL_CTRL2 is read, but the result is never used.
Drop the unused code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-3-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
in get_pdm_clk() REG_MICFIL_CTRL2 is read twice. Drop second read.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220414162249.3934543-2-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220418110259.2559144-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module on DSP side serves a processing purpose. Depending on its
purpose, it needs different information during its initialization. Add
functions responsible for creating instances of specific module types
given the information coming from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When binding modules to pins other than pin0, sometimes additional
preparations need to be made, depending on the module type.
Add function that prepares modules when necessary before binding them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Creating the pipelines and instantiating the modules alone is
insufficient to have a fully operational stream. Before it can be run,
stream components need to be bound. Add arming functions to ensure all
necessary operations are completed before path is yielded back to the
avs_path_create() caller.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add functions to ease with state changing of all objects found in the
path. Each represents either a BIND/UNBIND or SET_PIPELINE_STATE IPC.
DSP pipelines follow simple state machine scheme:
CREATE -> RESET -> PAUSE -> RUNNING -> PAUSE -> RESET -> DELETE
There is no STOP, PAUSE serves that purpose instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To implement ASoC PCM operations, DSP path handling is needed. With path
template concept present, information carried by topology file can be
converted into runtime path representation. Each may be composed of
several pipelines and each pipeline can contain a number of processing
modules inside. Number of templates and variants found within topology
may vastly outnumber the total amount of pipelines and modules supported
by AudioDSP firmware simultaneously (in runtime) so none of the IDs are
specified in the topology. These are assigned dynamically when needed
and account for limitations described by FIRMWARE_CONFIG and
HARDWARE_CONFIG basefw parameters.
Paths are created on ->hw_params() and are freed on ->hw_free() ALSA PCM
operations. This choice is based on firmware expectations - need for
complete set of information when attempting to instantiate pipelines and
modules on AudioDSP side. With DMA and audio format provided, search
mechanism tests all path variants available in given path template until
a matching variant is found. Once found, information already available
is combined with all avs_tplg_* pieces pointed by matching path variant.
This finally allows to begin a cascade of IPCs which goal is to reserve
resources and prepare DSP for upcoming audio streaming.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare representatives for all crucial elements which stream on ADSP
side is made of. That covers pipelines and modules subject which are
presented by struct avs_path_pipeline and avs_path_module respectively.
While struct avs_path_binding and struct avs_path do not represent any
object on firmware side directly, they are needed to help track the
interconnections and membership of every pipeline and module created.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow topology to specify formatted strings so machine board's
predefined ->link_mask can be used to specify SSP port number
automatically.
This is done to help reduce the amount of topology files as many I2S
configurations contain codec of the same type with little to no
differences in number of scenarios supported - the only difference being
the port number codec is connected to.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Add custom handlers for a range of operations available in struct
snd_soc_tplg_ops to allow for actually loading the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path template is similar to path description found in skylake-driver
and it describes how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out. It is
tied to DAPM widget's (representing either a FE or a BE) private data.
Depending on the number of audio formats supported, each path template
may carry one or more descriptions of given path. During runtime, when
audio format is known, description matching said format is selected and
used when instantiating path on ADSP firmware side through IPCs.
Add parsing helpers to support loading such information from the
topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Shape of a path on DSP side, that is, the number and the layout of its
pipelines and modules is paramount for streaming to be efficient and low
power-consuming. Add parsing helpers to support loading such information
from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Path in ADSP firmware is represented by one or more pipelines. Just like
modules, these are described by a config structure. Add parsing helpers
to support loading such information from the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Anything that goes beyond module base config is an extension config. It
covers all fields for all specific module types available in ADSP
firmware. Add parsing helpers to support loading such information from
the topology file.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AVS topology is split into two major parts: dictionaries - found within
ASoC topology manifest - and path templates.
Dictionaries job is to reduce the total amount of memory
occupied by topology elements. Rather than having every pipeline and
module carry its own information, each refers to specific entry in
specific dictionary by provided (from topology file) indexes. In
consequence, most struct avs_tplg_xxx are made out of pointers.
To support the above, range of parsing helpers for all value-types known
to ALSA: uuid, bool, byte, short, word and string are added. Additional
handlers help translate pointer-types and more complex objects such as
audio formats and module base configs.
Path templates are similar to path descriptions found in skylake-driver
and they describe how given path shall look like in runtime - number of
modules and pipelines that shape it and how they are laid out.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220331135246.993089-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds an IP identifier for each Intel platform. The
identifier will be used to select different code branches or
constants.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Expose the code loader functions for re-use in new platforms
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the rom_status_reg field to struct sof_intel_dsp_desc and define
it for HDA platforms. This will be used to check the ROM status during
FW boot.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the check_ipc_irq op for HDA platforms and use it
when checking if it is an IPC IRQ.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
BIT() macros should be used for all ADSPIC/IS registers.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the definition of the HDA_CL_STREAM_FORMAT macro from the header
file.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dsp_ops are mostly common between platforms. Introduce a common
structure and an init function to set platform-specific values.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that we start having multiple platforms with minor variants, the
use of the const qualifier for 'dsp_ops' is starting to be
sub-optimal: the structures are copied across platforms, with only a
couple of members that differ.
This patch removes the const qualifier without any functionality
changes, and adds an optional initialization callback. In follow-up
patches, the dsp_ops will revisited for Intel HDaudio platforms, with
the differences added programmatically over a common baseline.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the topology filename is modified at a higher level, be it with a
DMI quirk or a kernel module parameter, we don't want to use the
default 'nocodec' topology name extracted from descriptors.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing 'tplg_path' module parameter can be used to load
alternate firmware files, be it for development or to handle
OEM-specific or board-specific releases. However the topology filename
is either hard-coded in machine descriptors or modified by specific
DMI-quirks.
For additional flexibility, this patch adds the 'tplg_filename' module
parameter to override topology names.
To avoid any confusion between DMI- and parameter-override, a variable
rename is added.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing 'fw_path' module parameter can be used to load alternate
firmware files, be it for development or to handle OEM-specific or
board-specific releases. The firmware name is however non-modifiable
and defined by platform-specific descriptors.
For additional flexibility during development or enable quirks, this
patch adds the 'fw_filename' module parameter to override default
firmware names.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Paul Olaru <paul.olaru@oss.nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid misleading file names, use different names for INTEL_IPC4
firmware files.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds a default IPC type for each platform, along with file
paths to be used for each IPC type. To make reviews simpler, we only
modify platform descriptors in this table, the information will be
used in the next patch.
The Intel IPCv4 is only supported on Intel platforms after APL, and
not by default. In follow-up patches, support for SKL and KBL will be
added, and in those two cases the IPCv4 will be the default (and only
supported mode).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the addition of the IPCv4, we need the ability to select
different paths for firmware and topologies.
First add an indirection. Follow-up patches will add mechanisms to
select a default IPC or override it.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220414184817.362215-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_card_jack_new() allowed to create jack kcontrol without pins,
but did not create kcontrols. The jack would not have kcontrols if pins
were not going to be added.
This renames the old snd_soc_card_jack_new() to
snd_soc_card_jack_new_pins() for use when pins are provided or will be
added later. The new snd_soc_card_jack_new() appropriately creates a
jack for use without pins and adds a kcontrol.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Link: https://lore.kernel.org/r/20220408041114.6024-1-akihiko.odaki@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver should use the pci_resource_len() to get the actual length of
pci bar, and compare it with the expect value. If the bar size is too
small (such as a broken device), the driver should return an error.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409143950.2570186-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver, OMAP1 specific, now omits clk_prepare/unprepare() steps, not
supported by OMAP1 custom implementation of clock API. However, non-CCF
stubs of those functions exist for use on such platforms until converted
to CCF.
Update the driver to be compatible with CCF implementation of clock API.
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220407191202.46206-1-jmkrzyszt@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Using pm_runtime_resume_and_get is more appropriate
for simplifing code
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220412083000.2532711-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stephen Kitt <steve@sk2.org>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is unused; there are a few remaining files which
use the argument and will need i2c_match_id migration.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is continuation of the IPC abstraction in the SOF driver in
preparation for supporting the new IPC supported by the SOF firmware.
It introduces abstraction for top-level IPC ops for sending/receiving
regular and large IPC's.
Peter Ujfalusi (15):
ASoC: SOF: Add helper function to prepare and send an IPC message
ASoC: SOF: Add high level IPC IO callback definitions to ipc_ops
ASoC: SOF: ipc3: Implement the tx_msg IPC ops
ASoC: SOF: ipc3: Use sof_ipc3_tx_msg() internally for message sending
ASoC: SOF: ipc3: Implement the set_get_data IPC ops
ASoC: SOF: ipc3: Implement the get_reply IPC ops
ASoC: SOF: ipc3: Implement rx_msg IPC ops
ASoC: SOF: ipc: Separate the ops checks by functions/topics
ASoC: SOF: ipc: Add check for mandatory IPC message handling ops
ASoC: SOF: ipc: Use the get_reply ops in snd_sof_ipc_get_reply()
ASoC: SOF: ipc: Switch over to use the tx_msg and set_get_data ops
ASoC: SOF: ipc: Switch over to use the rx_msg ops
ASoC: SOF: Add widget_kcontrol_setup control ops for IPC3
ASoC: SOF: sof-audio: Use the widget_kcontrol_setup ops for kcontrol
set up
ASoC: SOF: ipc: Move the ipc_set_get_comp_data() local to ipc3-control
sound/soc/sof/ipc.c | 858 ++---------------------------------
sound/soc/sof/ipc3-control.c | 131 +++++-
sound/soc/sof/ipc3.c | 682 +++++++++++++++++++++++++++-
sound/soc/sof/sof-audio.c | 54 +--
sound/soc/sof/sof-audio.h | 7 +-
sound/soc/sof/sof-priv.h | 28 +-
6 files changed, 880 insertions(+), 880 deletions(-)
--
2.25.1
Merge series from Mario Limonciello <mario.limonciello@amd.com>:
It's not possible to probe for the presence of a DMIC, so the ACP6x
machine driver currently has a hardcoded list of all the systems known
to have a DMIC connected to the ACP.
Although this design works it means that the acp6x driver needs to always
grow with more systems and worse, if an OEM introduces a new system there
will be a mismatch in time that even if the driver (otherwise) works fine
it needs their system added to the list to work.
So this series introduces a _DSD that OEMs can populate into the BIOS to
indicate presence of a DMIC.
sound/soc/tegra/tegra186_asrc.c:90:12: error: ‘tegra186_asrc_runtime_resume’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/tegra/tegra186_asrc.c:80:12: error: ‘tegra186_asrc_runtime_suspend’ defined but not used [-Werror=unused-function]
static int tegra186_asrc_runtime_suspend(struct device *dev)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark these functions as __maybe_unused to avoid this kind of warning.
Fixes: a2df8c2d5b ("ASoC: tegra: Add Tegra186 based ASRC driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220411020908.580-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-15-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-14-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-13-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-12-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-11-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-10-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-9-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-8-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-7-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-6-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-5-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-4-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-3-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405165836.2165310-2-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the acp6x machine driver requires a hardcoded list of systems
that physically have DMIC connected.
To avoid having to continually add to an evergrowing list of systems add
support for a _DSD that can advertise this.
OEMs can add this _DSD to their BIOS under the ACP device to automatically
add the device to this driver without requiring any driver modifications.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-3-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently all of the quirked systems use the same card and so the
DMI quirk list doesn't contain driver data.
Add driver data to these quirks and then check the data was present
or not. This will allow potentially setting quirks for systems with
faulty firmware that claims to have a DMIC but doesn't really.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20220411134532.13538-2-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_ipc_set_get_comp_data() only used for kcontrol data update
and it is an IPC3 message parsing function.
Move it out from the generic ipc.c to ipc3-control.c and rename it to
better describe it's function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove the local implementation and switch to the IPC neutral ops to
set up the kcontrols associated with the swidget.
The set up call uses snd_sof_ipc_set_get_comp_data() which is largely an
IPC3 parsing function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the widget_kcontrol_setup control IPC ops for IPC3.
The widget_kcontrol_setup callback can be used to set up all
kcontrols associated with the swidget.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new ops for handling message reception.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new ops for sending messages and to handle large component data
set get operation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the get_reply ops to allow IPC dependent handling of the reply message.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that the mandatory IPC message handling ops are provided by the
IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Separate the mandatory ops checks by topics (pcm and topology for now) to
be able to provide intuitive feedback on the possible missing ops and to
make it easier to add new mandatory ops checks in the future.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the rx_msg callback to handle message reception
for IPC3.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the get_reply callback to copy the reply message
from mailbox to msg->reply_data buffer.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the set_get_data callback for handling large
data set and get.
The set_get_data() in IPC3 can be used only for component messages. The
function expects the caller to prepare the message behind the data pointer
for sending/receiving data. The callback only implements the needed code
to be able to split up a message if needed for transfer.
The set_get_data ops is based on the existing
snd_sof_ipc_set_get_comp_data() and sof_set_get_large_ctrl_data() but made
it generic entry point.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using sof_ipc_tx_message() for sending message, use the
sof_ipc3_tx_msg() directly within ipc3.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the implementation for the IPC3 tx_msg callback for sending a single
IPC message.
The implementation is equivalent to the currently used code in ipc.c
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add tx_msg(), rx_msg(), set_get_data() and get_reply() ops, which can
be used as a generic API for sending, receiving single messages and
to write and read large data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The new sof_ipc_send_msg() can be used by IPC dependent code to prepare
the ipc->msg for a new message transmission and then call in to platform
code to send the message.
Higher level code should be handling the completion and reply.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220405172708.122168-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After a successful lpass_macro_pds_init() call, lpass_macro_pds_exit() must
be called.
Add the missing call in the error handling path of the probe function and
use it.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5b5a015a9b1dc8011c6a4053fa49da1f2531e47c.1648969065.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jiaxin Yu <jiaxin.yu@mediatek.com>:
The series reuses mt8192-mt6359-rt1015-rt5682.c for supporting machine
driver with rt1015p speaker amplifier and rt5682s headset codec.
Fix the following coccicheck review:
./sound/soc/mediatek/mt8195/mt8195-mt6359.c:1657:1-2:
mt8195_mt6359_dt_match is not NULL terminated at line 1657
Fixes: 86a6b9c9df ("ASoC: mediatek: mt8195: add machine support for max98390 and rt5682")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220408100309.2495462-1-lv.ruyi@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for using the rt5682s codec together with rt1015p on
mt8192-mt6359 machines. All configurations are shared with the rt5682
codec variant, so simply select the SND_SOC_RT5682S config to ensure the
codec is present and set the correct card name. The codec will be linked
to by pointing to it in the headset-codec property in the devicetree.
While at it, also create macros for the names of the different codec
variants supported by this driver, as well as rename occurrences of
rt1015p_rt5682 to rt1015p_rt5682x, since they are shared between rt5682
and rt5682s.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-5-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the refactoring to allow the same machine driver to be used for
the rt1015(p) and rt5682(s) codecs on the MT8192 platform, parse the
rt5682(s) codec from the headset-codec property in the devicetree and wire
it to the I2S8 and I2S9 backends.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-4-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the refactoring to allow the same machine driver to be used for
the rt1015(p) and rt5682(s) codecs on the MT8192 platform, parse the
rt1015(p) codecs from the speaker-codecs property in the devicetree and
wire them to the I2S3 backend, instead of hardcoding the links and
selecting through the compatible.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220408060552.26607-3-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>:
Huawei Matebook D15 uses two different GPIOs are used to control the output:
- gpio0 controls the speaker output;
- gpio1 controls the headphone output.
Changing both at the same time cause spurious events that are mis-interpreted
as input events, causing troubles on apps. So, a delay is needed before turning
on such gpios.
Also, the headset microphone is connected to MIC1, instead of MIC2 port.
With this patch, plugging a headphone causes a jack event to trigger the speaker
supply, powering down the speaker and powering up the headphone output.
Removing the headphone also triggers the power supply, powering up the speaker
and powering down the headphone.
The headset microphone also works.
Based on experimental tests, Huawei Matebook D15 actually uses
both gpio0 and gpio1: the first one controls the speaker, while
the other one controls the headphone.
Also, the headset is mapped as MIC1, instead of MIC2.
So, add a quirk for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The headset/internal mic can either be routed as mic1/mic2
or vice-versa.
By default, the driver assumes that the headset is mapped as
mic2, but not all devices map this way.
So, add a quirk to support changing it to mic1, using mic2
for the internal analog mic (if any).
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/5d88fc29b79be7ab77dae391c8e5ee929fd36c27.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices may use both gpio0 and gpio1 to independently switch
the speaker and the headphone.
Add support for that.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/535454c0c598a8454487fe29b164527370e2db81.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for the support of an additional gpio for headphone
control, rename GPIOs to make explicit references to speakers and
gpio0 or gpio1.
No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/3008c576ca45d5cc99ad4a18d1d30de45a0aff80.1649357263.git.mchehab@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8195 shutdown callback function implementation to ensure that
shutdown flow is called to shutdown dsp core, disable adsp clock, and
power off dsp sram correctly during reboot flow.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220406194048.289787-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add shutdown callback function for SOF OF device and call
snd_sof_device_shutdown in sof_of_shutdown callback for DSP
shutdown sequence.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220406194048.289787-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 17.824467] Call Trace:
[ 17.824774] <TASK>
[ 17.825040] regulator_bulk_free+0x82/0xe0
[ 17.825514] devres_release_group+0x319/0x3d0
[ 17.825882] i2c_device_probe+0x766/0x940
[ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.
This patch corrects the endpoints for max98373 codec.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital
circuits along with internal memory, powering off this is the last thing
that codec should do when going to very low power.
Current code was powering off this Buck if there are no users of sysclk,
which is not correct. Powering off this buck will result in no register access.
This code path was never tested until recently after adding pm support
in SoundWire controller. Fix this by removing the buck poweroff when the
codec is active and also the code that is not used.
Without this patch all the read/write transactions will never complete and
results in SLIMBus Errors like:
qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110
wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock
on wcd934x-codec.1.auto for register: [0x00000d05] -110
qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20220407094313.2880-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
scontrol doesn't get freed when kstrdup returns NULL.
Fix by free iscontrol in that case.
scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL);
if (!scontrol)
return -ENOMEM;
scontrol->name = kstrdup(hdr->name, GFP_KERNEL);
if (!scontrol->name)
return -ENOMEM;
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We set the cpu_dai capture_ or playback_widget on widget_ready but
never clear them, which leads to failures when unloading/reloading a
topology in modprobe/rmmod tests
BugLink: https://github.com/thesofproject/linux/issues/3535
Fixes: 311ce4fe76 ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch takes a defensive programming and paranoid approach in case
the parent device (SoundWire) is pm_runtime resumed but the rt711
device is not. In that case, during the attachment and initialization,
a jack detection workqueue can be scheduled. Since the pm_runtime
suspend routines will not be invoked, the sequence to cancel all
deferred work is not executed, and the jack detection could happen
after the bus stops operating, leading to a timeout.
This patch applies the same solution to rt5682, based on the
similarities between codec drivers. The race condition with rt5682 was
not detected experimentally though.
BugLink: https://github.com/thesofproject/linux/issues/3459
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405173952.2180743-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20220405164031.2160888-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt1016 driver wasn't listed in Kconfig and Makefile, which AFAICT
means it isn't ever built. This patch adds the appropriate entries to
Kconfig and Makefile.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405171158.2168762-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163618.2158090-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405130326.2107293-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163400.2156631-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
wm8731.c is excluded and will be submitted separately.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405122411.2096387-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163533.2157401-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220405163750.2158916-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas is the only user of ak4613 driver on upstream for now.
It has STEREO/TDM512/TDM256/TDM128 mode, but STEREO only is used,
because of Renesas board connection.
I noticed that I can test first 2ch out of TDM256 mode 8ch
Playback even in such a situation.
base-commit: 3123109284
Follow Intel's design to replace max98360a amp SSP2 reather than SSP1
by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct.
And reusing max98357's topology since DAI setting could be leveraged.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220324084708.2009375-1-ajye_huang@compal.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Refactoring in commit a50b7926d0 ("ASoC: fsl_sai: implement 1:1
bclk:mclk ratio support") led to the bypass never happening
as (ratio = 1) was caught in the existing if (ratio & 1) continue;
check. The correct check sequence instead is:
- skip all ratios lower than one and higher than 512
- skip all odd ratios except for 1:1
- skip 1:1 ratio if and only if !support_1_1_ratio
And for all others, calculate the appropriate divider. Adjust the
code to facilitate this.
Fixes: a50b7926d0 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't dereference simple_dai before it has been checked for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1e974e5b82 ("ASoC: audio_graph_card2: Add support for variable slot widths")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This adds basic audio support for the Cirrus Logic CS35L45 amplifier.
The first two patches add two generic helpers to ASoC, and patch 3 is
a kunit test for patch 2.
Merge series from Heiner Kallweit <hkallweit1@gmail.com>:
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). The proposed solution allows
other drivers to adopt the same approach with minimal effort.
With the patch the error is gone and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!
Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). With the patch the error is gone
and that's the debugfs entries.
/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow the component debugfs_prefix to be set from
snd_soc_component_driver. First use case is avoiding a duplicate
debugfs entry error in case a device has multiple components
which have the same name therefore.
Note that we don't set component->debugfs_prefix if it's set already.
That's needed because partially component->debugfs_prefix is set
before calling snd_soc_component_initialize().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/d18bff6a-1df1-5f95-0cf8-10dbaa62d7be@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AK4613 has STEREO/TDM512/TDM256/TDM128 mode.
Renesas is the only user of ak4613 on upstream for now,
and is using it as STEREO mode, because of board connection.
Thus, current driver is supporting STEREO mode only, and other
modes are not supported.
But I noticed that I can try first 2ch out of TDM256 mode 8ch
Playback even in such a situation.
But because of board connection, I can't test full TDM256 mode,
and/or other TDM mode. Thus I don't want to add new DT propaty for now.
This patch enables TDM256 mode test by "ifdef style",
but it has no effect to current supported STEREO mode.
You can define AK4613_ENABLE_TDM_TEST to try TDM256 mode.
Please don't hesitate to break current code if you can add full TDM256
and/or other TDM mode. You don't need to care compatibility with Renesas.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rskp9l0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM support needs to use constraint_channels.
This patch renames current constraint to constraint_rates for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a6d0p9l7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current priv is using ->iface, but it is not good match
to support TDM. This patch adds ->ctrl1 instead of it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkxgp9lh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas is only user of ak4613 on upstream, and it is tested
only under "clock consumer" because of board mounting situation.
Thus, "clock provider" is not supperted/tested.
This patch return error if it was setup as clock provider.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czhwp9lq.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ak4613 driver is assuming symmetric format.
Thus, we don't need to have asymmetric table for judging the
iface at .hw_param.
This patch cleanup ak4613_interface for it.
This is prepare for TDM support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87ee2cp9lz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to use mutex_lock() for priv->cnt / priv->iface,
but we are missing it at ak4613_dai_startup().
This patch adds missing mutex_lock() for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsmsp9m7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 is a 15 V Boosted Mono Class D Amplifier with DSP
Speaker Protection and Adaptive Battery Management.
This initial driver provides standard non-boosted audio operation
without the DSP.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new kunit test for soc-utils and use it to test
snd_soc_tdm_params_to_bclk().
The test uses a table of values to avoid the possibility that an
on-the-fly generator contains the same algorithmic error as the
function-under-test and so fails to detect a bug.
There is no need to test every possible combination of values.
Enough test cases are included to give confidence that the function
is producing the correct results.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function snd_soc_tdm_params_to_bclk() to calculate
the bclk from params info and the tdm sots configuration.
When using a TDM frame of N slots of width W bits:
bclk = sample_rate * N * W
As a convenience to simplify calling code, if the slot count or
slot width are 0 a value will be obtained from the params. This
allows calling code to use this one function to handle cases of
TDM where only one parameter is fixed, or I2S where the slot width
is fixed (for example to set a 32-bit slot for 24-bit samples).
Also as a convenience the slot count can optionally be rounded up
to a multiple. This is mainly useful for I2S systems, since I2S has
two phases of LRCLK the number of slots is always a multiple of 2.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This node pointer is returned by of_parse_phandle() with
refcount incremented in this function.
Calling of_node_put() to avoid the refcount leak.
Fixes: 8625c1dbd8 ("ASoC: mediatek: Add mt2701-wm8960 machine driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404093526.30004-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call of_node_put(platform_node) to avoid refcount leak in
the error path.
Fixes: 94319ba10e ("ASoC: mediatek: Use platform_of_node for machine drivers")
Fixes: 493433785d ("ASoC: mediatek: mt8173: fix device_node leak")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220404092903.26725-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_snd_soc_register_component() may fails, we should check the error
and do the corresponding error handling.
Fixes: 150db8c5af ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to call clk_put() to undo clk_get() in the error path.
Use devm_clk_get() to obtain a reference to the clock, It has
the benefit that clk_put() is no longer required.
Fixes: 0d6a04da9b ("ASoC: Add Rockchip rk817 audio CODEC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220404090753.17940-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sameer Pujar <spujar@nvidia.com>:
This series adds support for Asynchronous Sample Rate Converter (ASRC)
module on Tegra186 and later generations of SoCs. ASRC is a client of
AHUB. The driver and DT support is added to make it work with Tegra
audio graph card. The module can be plugged into audio path using ALSA
mixer controls.
ASRC supports two modes of operation, where it gets the ratio info
from SW and ratio detector module. Presently the support is added for
SW mode.
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Following patches contain minor changes, cleaning up code to be easier
to read. Clean up few loops, to be simpler or altogether remove them.
Rename some things to make code easier to understand.
Merge series from Mark Brown <broonie@kernel.org>:
This series contains a bunch of fairly minor changes which overhaul and
modernise the WM8731 driver, there should be no impact on the driver's
functionality.
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series includes some miscellaenous fixes pertaining to IPC, DMA
buffer and DMA trace.
Merge series from Trevor Wu <trevor.wu@mediatek.com>:
This series of patches adds support for mt8195 board with mt6359, max98390
and rt5682. To prevent from copy-paste components, mt8195 machine
drivers and dt-bindings are merged in the patch.
Merge series from Mark Brown <broonie@kernel.org>:
At some point the machine driver for the audio subsystem on the
AT91SAM9G20-EK appears to have bitrotted, no longer probing due to
effects of the transition to the common clock framework. The first patch
in this series fixes the initial probe problem, with the rest of the
series being random other fixes and cleanups I noticed while looking at
the driver.
We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers
a warning calltrace like below:
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24
cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0
================================================================================
UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
When both bitoffset and otp_map[i].size are 0, the line 836 will
result in GENMASK(-1, 0), this triggers the shift-out-of-bounds
calltrace.
Here add a checking, if both bitoffset and otp_map[i].size are 0,
do not run GENMASK() and directly set otp_val to 0, this will not
bring any function change on the driver but could avoid the calltrace.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bug is here:
if (!dai) {
The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682_set_bclk1_ratio(dai, factor);'.
To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;
Cc: stable@vger.kernel.org
Fixes: ebbfabc16d ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These two bug are here:
list_for_each_entry_safe_continue(w, n, list,
power_list);
list_for_each_entry_safe_continue(w, n, list,
power_list);
After the list_for_each_entry_safe_continue() exits, the list iterator
will always be a bogus pointer which point to an invalid struct objdect
containing HEAD member. The funciton poniter 'w->event' will be a
invalid value which can lead to a control-flow hijack if the 'w' can be
controlled.
The original intention was to continue the outer list_for_each_entry_safe()
loop with the same entry if w->event is NULL, but misunderstanding the
meaning of list_for_each_entry_safe_continue().
So just add a 'continue;' to fix the bug.
Cc: stable@vger.kernel.org
Fixes: 163cac061c ("ASoC: Factor out DAPM sequence execution")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220329012134.9375-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CATPT_SSP_IFACE_LAST is being used only to calculate CATPT_SSP_COUNT.
Make CATPT_SSP_COUNT part of the enum directly and remove the redundant
constant.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220403141647.1037173-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Control the regulators separately instead of using regulator_bulk to
accord to the timing request in the datasheet.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20220328053338.21441-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the scontrol->priv is freed up during load operation it should be set
to NULL to be safe against double freeing attempt.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114757.32551-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325170734.1216018-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325162515.1204107-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220325164828.1209201-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L41_NUM_OTP_ELEM is 100, but only 99 entries are defined in
the array otp_map_1/2[CS35L41_NUM_OTP_ELEM], this will trigger UBSAN
to report a shift-out-of-bounds warning in the cs35l41_otp_unpack()
since the last entry in the array will result in GENMASK(-1, 0).
UBSAN reports this problem:
UBSAN: shift-out-of-bounds in /home/hwang4/build/jammy/jammy/sound/soc/codecs/cs35l41-lib.c:836:8
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23
Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022
Call Trace:
<TASK>
show_stack+0x52/0x58
dump_stack_lvl+0x4a/0x5f
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x45
__ubsan_handle_shift_out_of_bounds.cold+0x61/0xef
? regmap_unlock_mutex+0xe/0x10
cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib]
cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41]
cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c]
? cs35l41_hda_i2c_remove+0x20/0x20 [snd_hda_scodec_cs35l41_i2c]
i2c_device_probe+0x252/0x2b0
Fixes: 6450ef5590 ("ASoC: cs35l41: CS35L41 Boosted Smart Amplifier")
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220328123535.50000-2-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
otp_map[].size is a key variable to compute the value of otp_val and
to update the bit_offset, it is helpful to debug if could put it in
the debug log.
Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328123535.50000-1-hui.wang@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These structs only have their address assigned to the
dapm_{routes,widget} fields in the snd_soc_card struct,
both which are pointers to const data. Make them const to
allow the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330204227.25081-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
This patch follows the model set by da7218_of_get_id().
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Link: https://lore.kernel.org/r/20220325171904.1223539-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.
This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20220325171243.1218003-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
It seems that flush_scheduled_work() is called without any real
purpose at sst_context_cleanup() (the driver doesn't put works on the
global queue at all). As the flush_schedule_work() function is going
to be abolished in near future, let's drop it now.
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220322154826.19400-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220325165452.1212975-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This function is an analogue of snd_soc_of_get_dai_link_codecs to help
machine drivers read CPU DAI lists from devicetrees.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220331000449.41062-5-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Update error handling in power domain init and exit handlers, as existing handling
may cause issues in device remove function.
Use appropriate pm core api for power domain get and sync to avoid redundant code.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/1647965937-32203-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new sound control LED layer instead the direct ledtrig_audio_set()
call - see 22d8de62f1 ("ALSA: control - add generic LED trigger module
as the new control layer").
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220329120039.2394138-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved.
It's merely protected by card->pcm_mutex, instead. The spinlock is applied
at the later call with snd_soc_pcm_stream_lock_irq() only for the list
manipulations. (See it's *_irq(), not *_irqsave(); that means the context
being sleepable at that point.) So, we can use GFP_KERNEL safely there.
This patch revert commit d8a9c6e1f6 ("ASoC: soc-pcm: use GFP_ATOMIC for
dpcm structure") which is no longer needed since commit b7898396f4
("ASoC: soc-pcm: Fix and cleanup DPCM locking").
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e740f1930843060e025e3c0f17ec1393cfdafb26.1648757961.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
The scontrol->name is allocated with kstrdup, it must be freed before the
scontrol is freed to avoid leaking memory.
The constant leaking happens via sof_widget_unload() path on every module
removal.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114845.32747-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bug is here:
if (!dai) {
The list iterator value 'dai' will *always* be set and non-NULL
by for_each_component_dais(), so it is incorrect to assume that
the iterator value will be NULL if the list is empty or no element
is found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
'if (!dai) {' (never call dev_err() and never return -ENODEV;)
and lead to invalid memory access lately when calling
'rt5682s_set_bclk1_ratio(dai, factor);'.
To fix the bug, just return rt5682s_set_bclk1_ratio(dai, factor);
when found the 'dai', otherwise dev_err() and return -ENODEV;
Cc: stable@vger.kernel.org
Fixes: bdd229ab26 ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327081300.12962-1-xiam0nd.tong@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Academic correction of error handling:
In case the allocation of kc or kcontrol_type fails the correct label to
jump is hdr_err since the template.sname has been also allocated at this
point.
Fixes: d29d41e28e ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220331114957.519-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The AT91SAM9G20-EK audio driver is replacing any error code returned by
atmel_ssc_set_audio() with -EINVAL which could be unhelpful for debugging.
Pass through the error code, and include it in the log message we print for
good measure.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-4-broonie@kernel.org
The error handling in the AT91SAM9G20-EK machine driver probe did not
consistently free the SSC in error paths, sometimes immediately returning
an error rather than doing cleanup. Fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-3-broonie@kernel.org
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the
PCK0 output of the SoC, intended in the reference software to be supplied
using PLLB and programmed to 12MHz. As originally written for use with a
board file the audio driver was responsible for configuring the entire tree
but in the conversion to the common clock framework the registration of
the named pck0 and pllb clocks was removed so the driver has failed to
instantiate ever since.
Since the WM8731 driver has had support for managing a MCLK provided via
the common clock framework for some time we can simply drop all the clock
management code from the machine driver other than configuration of the
sysclk rate, the CODEC driver still respects that configuration from the
machine driver.
Fixes: ff78a189b0 ("ARM: at91: remove old at91-specific clock driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org
This patch adds support for mt8195 board with mt6359, max98390 and
rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to reuse the same configurations in user space,
rename the controls to generic names.
"Headphone Jack" -> "Headphone"
"Speakers" -> "Ext Spk"
"Left Speaker" -> "Left Spk"
"Right Speaker" -> "Right SPk"
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because most functions can be reused in different codec combinations,
mt8195 machine drivers are combined to one common file.
The model and compatible string are used to decide which codecs are
being used.
As a result, We can prevent from copy-paste functions when new codec
combination is introduced.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise driver for the coming driver combination.
There are two major parts including in the patch.
1. Apply some suggested changes used in mt8195-mt6359-rt1011-rt5682.c.
2. Reorder the layout for centralizing the codec related code.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Placing both the I2C and SPI code in the same module causes problems with
mixes of modular and non-modular builds of the buses so it's generally bad
practice. As with other drivers split the bus code out of the WM8731 driver
into separate modules.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The code for initialising the MCLK and mutex is identical in the I2C and SPI
probe functions so just move this out into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The supplies used by the wm8731 do not depend on the bus and there is no
need to do anything with the supplies prior to instantiating the regmap so
move the request into wm8731_init().
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Both the I2C and SPI bus code register the component immediately after they
call wm8731_hw_init(), factor the code out into the the common function and
rename it to just be plain wm8731_init() while we're at it since it's not
just for hardware init any more. This refactoring means we need to move the
function after the declaration of the component driver.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of retiring the old defines used to specify DAI formats update the
wm8731 driver to use the modern names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Other functions used for callbacks are named after function they call,
however function calling control_load seems to be an exception. Rename
it to soc_tplg_control_load().
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Error message refers to mixer, but it is used for various other types of
controls, so change it to refer to generic "controls".
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Name of SOC_TPLG_PASS_MIXER pass is bit confusing, suggesting that it
may only apply to mixers. As it is used for all control types, change
name to SOC_TPLG_PASS_CONTROL.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In practice soc_tplg_is_eof() returns boolean value and caller uses the
return value in such way, so convert the function to really do it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Functions creating kcontrols as written allow for creation of multiple
kcontrols at the same time, but in practice they are called for each
kcontrol individually. Remove unnecessary loop as code always loops once
anyway. This reduces intendation level allowing for some code to be put
on one line instead of multiple lines.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 'while' loop can be replaced with a 'for' loop, making it more clear
about what possible values there are, by having all of it in one place,
instead of scattered around.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220401120200.4047867-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add AHUB routes for ASRC module. The ASRC module can be plugged into audio
path as per the need. The routing controls can be used to setup the audio
path with ASRC similar to the already existing routes. The routes are added
to Tegra186 and later Tegra SoCs where ASRC module is present.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-4-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Asynchronous Sample Rate Converter (ASRC) converts the sampling frequency
of the input signal from one frequency to another. It can handle over a
wide range of sample rate ratios (freq_in/freq_out) from 1:24 to 24:1.
ASRC has two modes of operation. One where ratio can be programmed in SW
and the other where it gets the information from ratio estimator module.
The latter mode above can help address the cases where the sample rate is
not known at the stream set up time or is potentially time varying.
In addition, the ratio between input and output sample rate can be any
arbitrary number and the input and output clocks could be derived from
asynchronous clocks.
This patch registers ASRC driver with ASoC framework. The component driver
exposes DAPM widgets, routes and kcontrols for the device. The DAI driver
exposes ASRC interfaces, which can be used to connect different components
in the ASoC layer. Makefile and Kconfig support is added to allow build
the driver.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1648735412-32220-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
After the free PCM action is executed, no matter what
the return result is, it will return directly in sof_pcm_trigger.
So the return statement here is redundant.
Signed-off-by: tangmeng <tangmeng@uniontech.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header field is no longer used by the underlying code and
can be dropped from the snd_sof_ipc_msg struct.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The header parameter is not used anymore and now it can be dropped from
the parameter list of tx_message().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using a local reply to first read out the header from the
mailbox then memcpy it or read it again to msg->reply_data, read it
directly to it's final place from the start.
If we received an error we do not need to do a memcpy anymore.
If the reply is reporting a success then we don not need to read the reply
again from the mailbox if the reply_size equals to the already read header
size.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When system enters s0ix, the dma trace won't be used. Otherwise,
the DMA will access the host memory, which will prevent entering
S0ix. Driver has notified firmware not to send message through
dma trace. Let's also trigger stop dma trace in driver side.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change the interface to stop the DMA trace for suspend. Replace the
snd_sof_init_trace_ipc() and snd_sof_release_trace() calls with more
explicit interface for PM (the sole user for this interface).
The new snd_sof_trace_suspend() call takes the target PM state as argument,
allowing the trace implementation to decide how to handle the transition.
Use this information to release DMA resources only if DSP is suspended and
will not remain in D0.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Access through mmapped memory is not supported and it is explicitly
disabled with scontrol->readback_offset = 0; when a control is created.
Remove the dead code and the confusion around this feature.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the ipc->max_payload_size for validating that the message or reply
size can be supported.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The max_payload_size is an IPC level constraint. Add a new field,
max_payload_size to struct snd_sof_ipc and set it during IPC init.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dmab and dmab_bdl is not used by any platform, it can be removed from
struct snd_sof_dev.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no reason to use the sdev->dmab and sdev->dmab_bdl as the buffers
are only used locally: allocated used and freed in the same function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220330201926.1330402-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Just a few fixes that have been gathered since the previous PR.
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip
-----BEGIN PGP SIGNATURE-----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=MFKn
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few fixes that have been gathered since the previous pull:
- An additional fix for potential PCM deadlocks
- A series of HD-audio CS8409 codec patches for new models
- Other device specific fixes for HD-audio, ASoC mediatek, Intel,
fsl, rockchip"
* tag 'sound-fix-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Fix potential AB/BA lock with buffer_mutex and mmap_lock
ALSA: hda: Avoid unsol event during RPM suspending
ALSA: hda/realtek: Fix audio regression on Mi Notebook Pro 2020
ALSA: hda/cs8409: Add new Dolphin HW variants
ALSA: hda/cs8409: Disable HSBIAS_SENSE_EN for Cyborg
ALSA: hda/cs8409: Support new Warlock MLK Variants
ALSA: hda/cs8409: Fix Full Scale Volume setting for all variants
ALSA: hda/cs8409: Re-order quirk table into ascending order
ALSA: hda/cs8409: Fix Warlock to use mono mic configuration
ALSA: cs4236: fix an incorrect NULL check on list iterator
ALSA: hda/realtek: Enable headset mic on Lenovo P360
ASoC: SOF: Intel: Fix build error without SND_SOC_SOF_PCI_DEV
ALSA: hda/realtek: Add mute and micmut LED support for Zbook Fury 17 G9
ASoC: rockchip: i2s_tdm: Fixup config for SND_SOC_DAIFMT_DSP_A/B
ASoC: fsl-asoc-card: Fix jack_event() always return 0
ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLs
syzbot caught a potential deadlock between the PCM
runtime->buffer_mutex and the mm->mmap_lock. It was brought by the
recent fix to cover the racy read/write and other ioctls, and in that
commit, I overlooked a (hopefully only) corner case that may take the
revert lock, namely, the OSS mmap. The OSS mmap operation
exceptionally allows to re-configure the parameters inside the OSS
mmap syscall, where mm->mmap_mutex is already held. Meanwhile, the
copy_from/to_user calls at read/write operations also take the
mm->mmap_lock internally, hence it may lead to a AB/BA deadlock.
A similar problem was already seen in the past and we fixed it with a
refcount (in commit b248371628). The former fix covered only the
call paths with OSS read/write and OSS ioctls, while we need to cover
the concurrent access via both ALSA and OSS APIs now.
This patch addresses the problem above by replacing the buffer_mutex
lock in the read/write operations with a refcount similar as we've
used for OSS. The new field, runtime->buffer_accessing, keeps the
number of concurrent read/write operations. Unlike the former
buffer_mutex protection, this protects only around the
copy_from/to_user() calls; the other codes are basically protected by
the PCM stream lock. The refcount can be a negative, meaning blocked
by the ioctls. If a negative value is seen, the read/write aborts
with -EBUSY. In the ioctl side, OTOH, they check this refcount, too,
and set to a negative value for blocking unless it's already being
accessed.
Reported-by: syzbot+6e5c88838328e99c7e1c@syzkaller.appspotmail.com
Fixes: dca947d4d2 ("ALSA: pcm: Fix races among concurrent read/write and buffer changes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000381a0d05db622a81@google.com
Link: https://lore.kernel.org/r/20220330120903.4738-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few fixes that came in during the merge window, all fairly routine.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmJEQ4YACgkQJNaLcl1U
h9DaQAf/VgSwgkvvN9ch08wPBHxZUvZ4JJ+mMGPUy1Qq5bKxZn6BPD8PdxnQY2Ni
LwFS3sAdVcZPnwIGt6HhmEtTN/fB85mIM8gF6XLlYurcPzY1mpwM8F52IwxVKPDt
DCOMEmC95NHf+Cw+ukH0SjGELF7xVe7GVdrDrnEqZUuEsu0V5pKsvSAuKJEvgXnU
YcYEOB+KDhQUnGVoYZJ38yQ+PLKn9XYz8XHddksqc1n89h8gk9pkj0YJDIe2ePnb
8vxycHmjj+z0CgAy8v9uQDMkjpnFyzvtZ3YQtZccekZiTKnPY8LhUKnAly/MIfGJ
Usxuo4CA3FDNQLwzNFoIYFNq2HdKdA==
=DQFJ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.18
A few fixes that came in during the merge window, all fairly routine.
There is a corner case with unsol event handling during codec runtime
suspending state. When the codec runtime suspend call initiated, the
codec->in_pm atomic variable would be 0, currently the codec runtime
suspend function calls snd_hdac_enter_pm() which will just increments
the codec->in_pm atomic variable. Consider unsol event happened just
after this step and before snd_hdac_leave_pm() in the codec runtime
suspend function. The snd_hdac_power_up_pm() in the unsol event
flow in hdmi_present_sense_via_verbs() function would just increment
the codec->in_pm atomic variable without calling pm_runtime_get_sync
function.
As codec runtime suspend flow is already in progress and in parallel
unsol event is also accessing the codec verbs, as soon as codec
suspend flow completes and clocks are switched off before completing
the unsol event handling as both functions doesn't wait for each other.
This will result in below errors
[ 589.428020] tegra-hda 3510000.hda: azx_get_response timeout, switching
to polling mode: last cmd=0x505f2f57
[ 589.428344] tegra-hda 3510000.hda: spurious response 0x80000074:0x5,
last cmd=0x505f2f57
[ 589.428547] tegra-hda 3510000.hda: spurious response 0x80000065:0x5,
last cmd=0x505f2f57
To avoid this, the unsol event flow should not perform any codec verb
related operations during RPM_SUSPENDING state.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220329155940.26331-1-mkumard@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 5aec989130 ("ALSA: hda/realtek - ALC236 headset MIC recording
issue") is to solve recording issue met on AL236, by matching codec
variant ALC269_TYPE_ALC257 and ALC269_TYPE_ALC256.
This match can be too broad and Mi Notebook Pro 2020 is broken by the
patch.
Instead, use codec ID to be narrow down the scope, in order to make
ALC256 unaffected.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215484
Fixes: 5aec989130 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220330061335.1015533-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
=FaKX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
For ESD reasons, all variants should now set HSBIAS_SENSE_EN.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Added 15 new laptops, with 2 variants:
Warlock MLK and Warlock MLK with Dual Mic
The only difference between the variants, is the
the dual Mic variants use a stereo DMIC.
These variants do no use reduce volume (Full Scale Volume)
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
All current variants (Bullseye/Warlock/Cyborg) should be using
reduced volume (-6dB) for better speaker protection.
Refactor to make more explicit the meaning and setting of
Full Scale Volume setting to avoid future confusion.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-4-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To ensure consistency, the quirk table should be re-ordered
in ascending order
[ a typo fix in the patch description by tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Warlock/Bullseye Laptops have a mono DMIC, Cyborg uses
a stereo DMIC, and the configuration should reflect this.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220328115614.15761-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
limited to 2 instructions (and typically fewer) on branch targets not starting
with ENDBR. CET-IBT also limits speculation of the next sequential instruction
after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides, as
described above, speculation limits itself.
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
-----BEGIN PGP SIGNATURE-----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=jZfK
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
Cc: stable@vger.kernel.org
Fixes: c2b73d1458 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo P360 is another platform equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some toolchains. This allows
powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to: Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh Kumar K.V, Anton
Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chen
Jingwen, Christophe JAILLET, Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel
Henrique Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu Hua, Haren
Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason Wang, Jeremy Kerr, Joachim
Wiberg, Jordan Niethe, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour, Madhavan
Srinivasan, Mamatha Inamdar, Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal
Suchanek, Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nour-eddine
Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy Dunlap, Ritesh Harjani, Rohan
McLure, Russell Currey, Sachin Sant, Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain,
Thierry Reding, Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean, Wedson
Almeida Filho, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=8r2c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Livepatch support for 32-bit is probably the standout new feature,
otherwise mostly just lots of bits and pieces all over the board.
There's a series of commits cleaning up function descriptor handling,
which touches a few other arches as well as LKDTM. It has acks from
Arnd, Kees and Helge.
Summary:
- Enforce kernel RO, and implement STRICT_MODULE_RWX for 603.
- Add support for livepatch to 32-bit.
- Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
- Merge vdso64 and vdso32 into a single directory.
- Fix build errors with newer binutils.
- Add support for UADDR64 relocations, which are emitted by some
toolchains. This allows powerpc to build with the latest lld.
- Fix (another) potential userspace r13 corruption in transactional
memory handling.
- Cleanups of function descriptor handling & related fixes to LKDTM.
Thanks to Abdul Haleem, Alexey Kardashevskiy, Anders Roxell, Aneesh
Kumar K.V, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Bhaskar
Chowdhury, Cédric Le Goater, Chen Jingwen, Christophe JAILLET,
Christophe Leroy, Corentin Labbe, Daniel Axtens, Daniel Henrique
Barboza, David Dai, Fabiano Rosas, Ganesh Goudar, Guo Zhengkui, Hangyu
Hua, Haren Myneni, Hari Bathini, Igor Zhbanov, Jakob Koschel, Jason
Wang, Jeremy Kerr, Joachim Wiberg, Jordan Niethe, Julia Lawall, Kajol
Jain, Kees Cook, Laurent Dufour, Madhavan Srinivasan, Mamatha Inamdar,
Maxime Bizon, Maxim Kiselev, Maxim Kochetkov, Michal Suchanek,
Nageswara R Sastry, Nathan Lynch, Naveen N. Rao, Nicholas Piggin,
Nour-eddine Taleb, Paul Menzel, Ping Fang, Pratik R. Sampat, Randy
Dunlap, Ritesh Harjani, Rohan McLure, Russell Currey, Sachin Sant,
Segher Boessenkool, Shivaprasad G Bhat, Sourabh Jain, Thierry Reding,
Tobias Waldekranz, Tyrel Datwyler, Vaibhav Jain, Vladimir Oltean,
Wedson Almeida Filho, and YueHaibing"
* tag 'powerpc-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
powerpc/pseries: Fix use after free in remove_phb_dynamic()
powerpc/time: improve decrementer clockevent processing
powerpc/time: Fix KVM host re-arming a timer beyond decrementer range
powerpc/tm: Fix more userspace r13 corruption
powerpc/xive: fix return value of __setup handler
powerpc/64: Add UADDR64 relocation support
powerpc: 8xx: fix a return value error in mpc8xx_pic_init
powerpc/ps3: remove unneeded semicolons
powerpc/64: Force inlining of prevent_user_access() and set_kuap()
powerpc/bitops: Force inlining of fls()
powerpc: declare unmodified attribute_group usages const
powerpc/spufs: Fix build warning when CONFIG_PROC_FS=n
powerpc/secvar: fix refcount leak in format_show()
powerpc/64e: Tie PPC_BOOK3E_64 to PPC_FSL_BOOK3E
powerpc: Move C prototypes out of asm-prototypes.h
powerpc/kexec: Declare kexec_paca static
powerpc/smp: Declare current_set static
powerpc: Cleanup asm-prototypes.c
powerpc/ftrace: Use STK_GOT in ftrace_mprofile.S
powerpc/ftrace: Regroup PPC64 specific operations in ftrace_mprofile.S
...
If SND_SOC_SOF_PCI_DEV is n, bulding fails:
sound/soc/sof/intel/pci-tng.o:(.data+0x1c0): undefined reference to `sof_pci_probe'
sound/soc/sof/intel/pci-tng.o:(.data+0x1c8): undefined reference to `sof_pci_remove'
sound/soc/sof/intel/pci-tng.o:(.data+0x1e0): undefined reference to `sof_pci_shutdown'
sound/soc/sof/intel/pci-tng.o:(.data+0x290): undefined reference to `sof_pci_pm'
Make SND_SOC_SOF_MERRIFIELD select SND_SOC_SOF_PCI_DEV to fix this.
Fixes: 8d4ba1be3d ("ASoC: SOF: pci: split PCI into different drivers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220323092501.145879-1-zhengbin13@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
Zbook Fury 17 G9 requires the same ALC285_FIXUP_HP_GPIO_LED quirk to
make its audio LEDs work.
So apply the quirk, and make it the last one since it's an LED quirk.
Fixes: 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220324062159.241313-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SoC specific code is generally used for older platforms that don't (yet)
use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire
-----BEGIN PGP SIGNATURE-----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=2fmA
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"SoC specific code is generally used for older platforms that don't
(yet) use device tree to do the same things.
- Support is added for i.MXRT10xx, a Cortex-M7 based microcontroller
from NXP. At the moment this is still incomplete as other portions
are merged through different trees.
- Long abandoned support for running NOMMU ARMv4 or ARMv5 platforms
gets removed, now the Arm NOMMU platforms are limited to the
Cortex-M family of microcontrollers
- Two old PXA boards get removed, along with corresponding driver
bits.
- Continued cleanup of the Intel IXP4xx platforms, removing some
remnants of the old board files.
- Minor Cleanups and fixes for Orion, PXA, MMP, Mstar, Samsung
- CPU idle support for AT91
- A system controller driver for Polarfire"
* tag 'arm-soc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
ARM: remove support for NOMMU ARMv4/v5
ARM: PXA: fix up decompressor code
soc: microchip: make mpfs_sys_controller_put static
ARM: pxa: remove Intel Imote2 and Stargate 2 boards
ARM: mmp: Fix failure to remove sram device
ARM: mstar: Select ARM_ERRATA_814220
soc: add microchip polarfire soc system controller
ARM: at91: Kconfig: select PM_OPP
ARM: at91: PM: add cpu idle support for sama7g5
ARM: at91: ddr: fix typo to align with datasheet naming
ARM: at91: ddr: align macro definitions
ARM: at91: ddr: remove CONFIG_SOC_SAMA7 dependency
ARM: ixp4xx: Convert to SPARSE_IRQ and P2V
ARM: ixp4xx: Drop all common code
ARM: ixp4xx: Drop custom DMA coherency and bouncing
ARM: ixp4xx: Remove feature bit accessors
net: ixp4xx_hss: Check features using syscon
net: ixp4xx_eth: Drop platform data support
soc: ixp4xx-npe: Access syscon regs using regmap
soc: ixp4xx: Add features from regmap helper
...
It's been a fairly calm development cycle. There are a few
last-minute ALSA core fixes, most notably for covering PCM ioctl
races, but the most of rest are device-specific changes.
Below are some highlights:
* ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
* ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
* HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
* USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices
-----BEGIN PGP SIGNATURE-----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=5cCU
-----END PGP SIGNATURE-----
Merge tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been a fairly calm development cycle. There are a few last-minute
ALSA core fixes, most notably for covering PCM ioctl races, but the
most of rest are device-specific changes.
Below are some highlights:
ALSA core:
- Fixes for PCM ioctl races that may lead to UAF
- Fix for oversized allocations in PCM OSS layer
ASoC:
- Start of moving SoF to support multiple IPC mechanisms
- Use of NHLT ACPI table to reduce the amount of quirking required
for Intel systems
- Preliminary works forthcoming Intel AVS driver for legacy Intel DSP
firmwares
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280,
Renesas RZ/V2L, Texas Instruments TAS585M
HD-audio:
- Driver re-binding fix for HD-audio
- Updates for Intel ADL and Tegra234, various platform quirks for
Dell, HP, Lenovo, ASUS, Samsung and Clevo machines
USB-audio:
- Quirk updates for Scarlett2, RODE, Corsair devices"
* tag 'sound-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (486 commits)
ALSA: hda/realtek: Add alc256-samsung-headphone fixup
ALSA: pci: fix reading of swapped values from pcmreg in AC97 codec
ALSA: pcm: Add stream lock during PCM reset ioctl operations
ALSA: pcm: Fix races among concurrent prealloc proc writes
ALSA: pcm: Fix races among concurrent prepare and hw_params/hw_free calls
ALSA: pcm: Fix races among concurrent read/write and buffer changes
ALSA: pcm: Fix races among concurrent hw_params and hw_free calls
ASoC: atmel: mchp-pdmc: print the correct property name
MAINTAINERS: Add Shengjiu to maintainer list of sound/soc/fsl
ASoC: SOF: Add a new dai_get_clk topology IPC op
ASoC: SOF: topology: Add ops for setting up and tearing down pipelines
ASoC: SOF: expose sof_route_setup()
ASoC: SOF: Add dai_link_fixup PCM op for IPC3
ASoC: SOF: Add trigger PCM op for IPC3
ASoC: SOF: Define hw_params PCM op for IPC3
ASoC: SOF: Introduce IPC3 PCM hw_free op
ASoC: SOF: pcm: expose the sof_pcm_setup_connected_widgets() function
ASoC: SOF: Introduce IPC-specific PCM ops
ASoC: SOF: Add bytes_ext control IPC ops for IPC3
ASoC: SOF: Add bytes_get/put control IPC ops for IPC3
...
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmI5jiEACgkQCF8+vY7k
4RWfnw/9FSBVrFgzoDwM4choQu997T6GSsEuqJFbLdDLPbKZifl9UsCPmenFp0aS
4D2EG4A1nF/HQTHJ6vPSWjgVP9zhCAX/DvHH+9DiSAWQoSIVmUZGoEhbAHlbE12K
PUs0MEIR8o8k3IBvMD6buH1FpnIgZO1ULi1Cx/5YH1GaRshdZrLcgz0YioXomLKE
KvNokrhLYzJFIWl34KZ+92RluPOy7DlEJpRNbCTYkaLYfSYqLs/FTisuEUt3gEso
tjgUaBxJ/k3AOgU4XXoeVlqTFuK1TY70aA0aqmVYPqZ7eCO2Btbm11h8WoYO/SgY
N3P57LP86WWUHNA13argVv/pQo0x8iX5RnYObLDMGGrUQyQT7BcjMGCrKIVyMRAz
06dZbnGnbsOOph9D7wwQ+xJQwUqyrllVVhRdMIWXJQjKqAP9mmgIB/dcwrrP5Ziw
y0fmuaXZ/ZmvD63yq2iWwV6niWvNa5XMnR3NxceOV60WOe9LS6aio/duwfaZ5ic1
qzTAtc/+3FuIgRD35eILrjymu53gW6pt6vS0pHP/+xvHq5Yp7u8Pc5+jFxLYRM8e
AOglA7ZxGGz1uL/LUJ4DD8BQ55wr0EH63Lm7Pfy4JmmzqI/TQwEQifT/H8mDNP+G
DCmod3ZyCsHH6vsN0afa4ZxqyCDToVHVwvko4mzOnl4hED5JteI=
=Bc0l
-----END PGP SIGNATURE-----
Merge tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- a major reorg at platform Kconfig/Makefile files, organizing them per
vendor. The other media Kconfig/Makefile files also sorted
- New sensor drivers: hi847, isl7998x, ov08d10
- New Amphion vpu decoder stateful driver
- New Atmel microchip csi2dc driver
- tegra-vde driver promoted from staging
- atomisp: some fixes for it to work on BYT
- imx7-mipi-csis driver promoted from staging and renamed
- camss driver got initial support for VFE hardware version Titan 480
- mtk-vcodec has gained support for MT8192
- lots of driver changes, fixes and improvements
* tag 'media/v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (417 commits)
media: nxp: Restrict VIDEO_IMX_MIPI_CSIS to ARCH_MXC or COMPILE_TEST
media: amphion: cleanup media device if register it fail
media: amphion: fix some issues to improve robust
media: amphion: fix some error related with undefined reference to __divdi3
media: amphion: fix an issue that using pm_runtime_get_sync incorrectly
media: vidtv: use vfree() for memory allocated with vzalloc()
media: m5mols/m5mols.h: document new reset field
media: pixfmt-yuv-planar.rst: fix PIX_FMT labels
media: platform: Remove unnecessary print function dev_err()
media: amphion: Add missing of_node_put() in vpu_core_parse_dt()
media: mtk-vcodec: Add missing of_node_put() in mtk_vdec_hw_prob_done()
media: platform: amphion: Fix build error without MAILBOX
media: spi: Kconfig: Place SPI drivers on a single menu
media: i2c: Kconfig: move camera drivers to the top
media: atomisp: fix bad usage at error handling logic
media: platform: rename mediatek/mtk-jpeg/ to mediatek/jpeg/
media: media/*/Kconfig: sort entries
media: Kconfig: cleanup VIDEO_DEV dependencies
media: platform/*/Kconfig: make manufacturer menus more uniform
media: platform: Create vendor/{Makefile,Kconfig} files
...
SND_SOC_DAIFMT_DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
SND_SOC_DAIFMT_DSP_B: PCM no delay mode, L data MSB during FRM LRC
Fixes: 081068fd64 (ASoC: rockchip: add support for i2s-tdm controller)
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220318100146.23991-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tests 72 and 78 for ALSA in kselftest fail due to reading
inconsistent values from some devices on a VirtualBox
Virtual Machine using the snd_intel8x0 driver for the AC'97
Audio Controller device.
Taking for example test number 72, this is what the test reports:
"Surround Playback Volume.0 expected 1 but read 0, is_volatile 0"
"Surround Playback Volume.1 expected 0 but read 1, is_volatile 0"
These errors repeat for each value from 0 to 31.
Taking a look at these error messages it is possible to notice
that the written values are read back swapped.
When the write is performed, these values are initially stored in
an array used to sanity-check them and write them in the pcmreg
array. To write them, the two one-byte values are packed together
in a two-byte variable through bitwise operations: the first
value is shifted left by one byte and the second value is stored in the
right byte through a bitwise OR. When reading the values back,
right shifts are performed to retrieve the previously stored
bytes. These shifts are executed in the wrong order, thus
reporting the values swapped as shown above.
This patch fixes this mistake by reversing the read
operations' order.
Signed-off-by: Giacomo Guiduzzi <guiduzzi.giacomo@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220322200653.15862-1-guiduzzi.giacomo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_reset() is a non-atomic operation, and it's allowed to run
during the PCM stream running. It implies that the manipulation of
hw_ptr and other parameters might be racy.
This patch adds the PCM stream lock at appropriate places in
snd_pcm_*_reset() actions for covering that.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322171325.4355-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We have no protection against concurrent PCM buffer preallocation
changes via proc files, and it may potentially lead to UAF or some
weird problem. This patch applies the PCM open_mutex to the proc
write operation for avoiding the racy proc writes and the PCM stream
open (and further operations).
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the previous fixes to hw_params and hw_free ioctl races, we need
to paper over the concurrent prepare ioctl calls against hw_params and
hw_free, too.
This patch implements the locking with the existing
runtime->buffer_mutex for prepare ioctls. Unlike the previous case
for snd_pcm_hw_hw_params() and snd_pcm_hw_free(), snd_pcm_prepare() is
performed to the linked streams, hence the lock can't be applied
simply on the top. For tracking the lock in each linked substream, we
modify snd_pcm_action_group() slightly and apply the buffer_mutex for
the case stream_lock=false (formerly there was no lock applied)
there.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In the current PCM design, the read/write syscalls (as well as the
equivalent ioctls) are allowed before the PCM stream is running, that
is, at PCM PREPARED state. Meanwhile, we also allow to re-issue
hw_params and hw_free ioctl calls at the PREPARED state that may
change or free the buffers, too. The problem is that there is no
protection against those mix-ups.
This patch applies the previously introduced runtime->buffer_mutex to
the read/write operations so that the concurrent hw_params or hw_free
call can no longer interfere during the operation. The mutex is
unlocked before scheduling, so we don't take it too long.
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently we have neither proper check nor protection against the
concurrent calls of PCM hw_params and hw_free ioctls, which may result
in a UAF. Since the existing PCM stream lock can't be used for
protecting the whole ioctl operations, we need a new mutex to protect
those racy calls.
This patch introduced a new mutex, runtime->buffer_mutex, and applies
it to both hw_params and hw_free ioctl code paths. Along with it, the
both functions are slightly modified (the mmap_count check is moved
into the state-check block) for code simplicity.
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220322170720.3529-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aDoACgkQJNaLcl1U
h9BPKgf/XSKCt67IzrbnI9UXp1Q13C54z57e+nGr4LBSRraT/WwdXFevefC6JZDq
bYQWhigFrQyyYSyxVJYIvtywXXpMzJ1ypzHqcBGmqCufoX0zoaRwTFYg60yiYqdy
cDsX82/1bhI9Dp3RWaEKaMyaa9FI0Kr3WTA6EKdo592u0hxj4UcK51r7qsp1JpsR
tQWGMYqqwtajhamFgrIlKiJDDVnv2qEhrWdho5W/FPAby+fsJ6VJBMhwEx/F7cXu
Mjfa0k2MoMAlNX9DxtIHweVECaN32HJsytrbgUAdYnBoGaZNkXwLwvyp9RIeDAMP
NZ+w3lwFLw1N8S2ho6kqtDpO+tJU0Q==
=Y6/E
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.18
Quite a quiet release for ASoC, lots of work on drivers and platforms
but nothing too groundbreaking but not much on the core itself:
- Start of moving SoF to support multiple IPC mechanisms.
- Use of NHLT ACPI table to reduce the amount of quirking required for
Intel systems.
- Some building blocks for use in forthcoming Intel AVS driver for
legacy Intel DSP firmwares.
- Support for AMD PDM, Atmel PDMC, Awinic AW8738, i.MX cards with
TLV320AIC31xx, Intel machines with CS35L41 and ESSX8336, Mediatek
MT8181 wideband bluetooth, nVidia Tegra234, Qualcomm SC7280, Renesas
RZ/V2L, Texas Instruments TAS585M
Today, hp_jack_event and mic_jack_event always return 0. However,
snd_soc_dapm_disable_pin and snd_soc_dapm_enable_pin may return a
non-zero value, this will cause the user who calling hp_jack_event
and mic_jack_event don't know whether the operation was really
successfully.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20220321065754.18307-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is a continuation to the SOF IPC abstraction work to support
the new IPC version introduced in the SOF firmware. It makes the top-level
control IO, PCM and PM code IPC-agnostic. Other than the first patch,
the rest are purely for abstraction and include no changes in
functionality.
The correct property is 'microchip,mic-pos', not 'mchp,mic-pos', so
replace all occurences of 'mchp,mic-pos' with 'microchip,mic-pos'.
Fix a multi-line comment format while we are at it.
Fixes: 50291652af ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220318092609.130901-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will help make the code for getting the mclk and bclk IPC specific.
Add the implementation for IPC3 as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce two new ops, set_up_all_pipelines and tear_down_all_pipelines
in struct ipc_tplg_ops and define these for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This will be used in IPC3-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the dai_link_fixup PCM op for IPC3 and use it
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the trigger PCM op for IPC3 and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the hw_params op for IPC3 and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the IPC3 PCM ops, define the hw_free op and modify all users to use
the op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It will be used in IPC-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce the IPC-specific PCM ops that will be used to abstract the
PCM related IPC's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the get/put/volatile_get control IPC ops for byte
controls for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the bytes_get/put IPC control ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the enum_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the switch_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the volume_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the topology control IPC ops for IPC3, implement the
control_notify op and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new set of IPC ops for PM with the ctx_save and ctx_restore ops
for suspend/resume and implement the ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add 3 new topology IPC ops for widget_setup, widget_free and dai_config
in order to make the pipeline management code IPC agnostic and implement
the ops for IPC3.
Use the newly introduced tplg dai_config op to configure the DAI during
BE DAI hw_params and hw_free.
Also, in preparation for IPC4, modify BE hw_params callback to skip
setting up the DAI widget. All widgets will be set up during FW
hw_params and the DAI_CONFIG IPC should be sent only if the widget
use_count is > 0. With setting up/freeing removed from the BE hw_params,
remove the configured flag as it is no longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For dynamic pipelines, We set up the DAI widget during BE DAI hw_params
and this results in it getting set up before the scheduler widget for the
pipeline it belongs to is set up. Move the scheduler widget set up into
sof_widget_setup() to ensure that the scheduler widget is always the first
widget in a pipeline to be set up and the last one to get freed after all
the other widgets have been freed.
Fixes: 5fcdbb2d45 ('ASoC: SOF: Add support for dynamic pipelines')
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the parameter changes fails, we don't need to keep the old
temporary buffers. Release those (and plugin instances) upon errors
for reducing dead memory footprint. Since we always call it at the
exit of snd_pcm_oss_changes_params_locked(), the explicit calls of
snd_pcm_oss_plugin_clear() can be dropped, too.
Along with it, unify the buffer-free calls to a single helper and call
it from the needed places.
Link: https://lore.kernel.org/r/20220318082157.29769-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.
Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
breaks mute and micmute LEDs because it changed the LED quirk from
ALC285_FIXUP_HP_GPIO_LED to ALC245_FIXUP_HP_GPIO_LED, so change it back
here.
Also reorder the chain of quirks to ensure LED quirk is the last one
being applied.
Fixes: 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220317221134.566358-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are some new registers added on i.MX8ULP, they are
the SPDIF transmit Professional C channel registers,
192bit SPDIF receive C channel registers, and 192bit SPDIF
transmit C channel registers.
There are two output lines, SPDIF_OUT1 and SPDIF_OUT2, the
original REG_SPDIF_STCSCH and REG_SPDIF_STCSCL are used for
SPDIF_OUT1, the new REG_SPDIF_STCSPH and REG_SPDIF_STCSPL
are used for SPDIF_OUT2, the 192bit SPDIF C channel registers
are used for both.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1647408538-2982-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This patchset makes the topology parsing layer in the SOF driver
IPC-agnostic in preparation for supporting the new IPC version
introduced in the SOF firmware. These patches purely contain abstraction
changes for the current IPC version (IPC3) supported and do not introduce
any functional changes.
Update power domains exit function calling from runtime resume
to remove function which was wrongly placed and causing crash in
device suspend and resume.
Fixes: 9e3d83c528 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Link: https://lore.kernel.org/r/1647355531-4150-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is essentially a revert of the commit dc865fb9e7 ("ASoC: sti:
Use snd_pcm_stop_xrun() helper"), which converted the manual
snd_pcm_stop() calls with snd_pcm_stop_xrun().
The commit above introduced a deadlock as snd_pcm_stop_xrun() itself
takes the PCM stream lock while the caller already holds it. Since
the conversion was done only for consistency reason and the open-call
with snd_pcm_stop() to the XRUN state is a correct usage, let's revert
the commit back as the fix.
Fixes: dc865fb9e7 ("ASoC: sti: Use snd_pcm_stop_xrun() helper")
Reported-by: Daniel Palmer <daniel@0x0f.com>
Cc: Arnaud POULIQUEN <arnaud.pouliquen@st.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220315091319.3351522-1-daniel@0x0f.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220315164158.19804-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Fixes: cab396d8b2 ("ASoC: amd: add ACP5x pcm dma driver ops")
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220316091303.9745-1-tangmeng@uniontech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This is similar to commit 64b92de960
("ASoC: wcd9335: fix a leaked reference by adding missing of_node_put")
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316083631.14103-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: 082482a502 ("ASoC: mediatek: mt8195: release device_node after snd_soc_register_card")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316084623.24238-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It will be safe when getting the calibration params after power-on.
All powers are ready to read the calibration params from EFUSE.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220315093740.12008-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the error handling path, the clk_prepare_enable() function
call should be balanced by a corresponding 'clk_disable_unprepare()'
call , as already done in the remove function.
Fixes: de66b34550 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316041924.17560-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20220315230816.2964577-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
Fix this by calling of_node_put() in error handling too.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220316014059.19292-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error path.
Fixes: fdbcb3cba5 ("ASoC: atmel: machine driver for at91sam9x5-wm8731 boards")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220316111530.4551-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes:081068fd64140 ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220315025415.2593762-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
kstrdup() is a memory allocation function which can return NULL when
some internal memory errors happen. It is better to check the return
value of it to catch the error in time.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_EC21778DC383823CBC4069EA9F0B84943905@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new topology IPC op, pipeline_complete in struct ipc_tplg_ops
and set the op for IPC3. Replace the calls to
snd_sof_complete_pipeline() with the calls to the topology IPC
pipeline_complete op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make widget binding in the topology parser IPC agnostic by introducing a
new op, bind_event, in struct ipc_tplg_widget_ops. Also set the op
for all widget types in the IPC3 topology ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make the control parser in topology IPC agnostic by introducing 2 new
topology IPC ops, control_setup and control_free. These ops handle
setting up/freeing the control data in the IPC format based on the IPC
version.
Along with this, modify the struct snd_sof_control to remove the
IPC-specific field, control_data and replace it with the void pointer to
ipc_control_data. Also, add a few new fields to store all the
information parsed from topology.
Finally, define and set the control setup/free ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the dai_in/out widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
DAI component based on the topology widget_setup op in ipc3_tplg_ops.
DAI link parsing is also made IPC agnostic by parsing the list of tokens
associated with all DAI types. The config will be applied to the
respective DAI widgets during topology complete.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define and set the route_setup op for IPC3 topology ops and use it for
setting up routes.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to effect type widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
process component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the siggen widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
tone component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the asrc widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
asrc component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the src widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
src component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the mux/demux widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
mux/demux component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the mixer widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
mixer component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the pga type widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
pga component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the buffer widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
buffer component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define the list of tokens pertaining to the scheduler widgets, parse and
save them as part of the swidget tuples array. Once topology parsing is
complete, these tokens will be applied to create the IPC structure for the
pipeline component based on the topology widget_setup op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the IPC ops including the topology-related IPC ops for the current
version (IPC3, named after the current SOF firmware ABI major version 3.0)
of IPC supported by the SOF firmware and set it as default. The topology
IPC ops and the widget ops within the topology IPC ops are both
mandatory.
With the introduction of IPC3 ops, we define the list of tokens pertaining
to the AIF_IN/AIF_OUT widgets. Then these tokens are parsed during
topology parsing and saved as part of the swidget tuples array. Once
topology parsing is complete, these tokens will be applied to create the
IPC structure for the host component based on the topology widget_setup
op in ipc3_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for processing tuple arrays and populating the
IPC structure objects based on the token ID passed.
Introduce a new enum representing token ID for the tokens
currently used in the topology parse and a new struct sof_token_info
to store the information about a token set. Finally, expose the struct
snd_sof_topology token as it will be used by IPC-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In preparation for supporting a new IPC version that will be introduced
in the SOF firmware, add a new set of ops that will be version specific.
For now, the IPC ops contain only the topology-related ops for setting
up widgets and pipeline connections. It will be expanded later to also
abstract the IPC-specific items in the component driver and DAI driver.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce a new struct for DAI links to save the DAI link information
parsed from topology. Also add a list of dai_links to struct snd_sof_dev
that will be populated during topology parsing.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220314200520.1233427-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The gnttab_end_foreign_access() family of functions is taking a
"readonly" parameter, which isn't used. Remove it from the function
parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In function mchp_pdmc_af_put(), Intel's kernel test robot reports the
following warning:
sound/soc/atmel/mchp-pdmc.c:186:34: warning: address of array \
'uvalue->value.integer.value' will always evaluate to 'true' \
[-Wpointer-bool-conversion]
This is because we are using `uvalue->value.integer.value` which its
type is `long value[128];` for conditional expression and that array
will always decay to a non-NULL pointer. Using a non-NULL pointer for
conditional expression will always evaluate to true.
Fix this by changing it to `uvalue->value.integer.value[0]` as that's
what the mchp_pdmc_af_get() function sets.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alviro Iskandar Setiawan <alviro.iskandar@gnuweeb.org>
Link: https://lore.kernel.org/r/20220315001848.3763534-1-alviro.iskandar@gnuweeb.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 0bf6276392 ("x32: Warn and disable rather than error if
binutils too old") added a small test in arch/x86/Makefile because
binutils 2.22 or newer is needed to properly support elf32-x86-64. This
check is no longer necessary, as the minimum supported version of
binutils is 2.23, which is enforced at configuration time with
scripts/min-tool-version.sh.
Remove this check and replace all uses of CONFIG_X86_X32 with
CONFIG_X86_X32_ABI, as two symbols are no longer necessary.
[nathan: Rebase, fix up a few places where CONFIG_X86_X32 was still
used, and simplify commit message to satisfy -tip requirements]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220314194842.3452-2-nathan@kernel.org
* The HP ProBook 440/450 and EliteBook 640/650 are
using ALC236 codec which used 0x02 to control mute LED
and 0x01 to control micmute LED. Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Link: https://lore.kernel.org/r/20220314142122.71602-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It should be better to reverse the check on codec_dai
and returned early in order to be easier to understand.
Fixes: de2c6f9881 ("ASoC: soc-compress: prevent the potentially use of null pointer")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220310030041.1556323-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
ASUS GA402 requires a workaround to manage the routing of its 4 speakers
like the other ASUS models. Add a corresponding quirk entry to fix it.
Signed-off-by: Jason Zheng <jasonzheng2004@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220313092216.29858-1-jasonzheng2004@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the RODE NT-USB the lowest Playback mixer volume setting mutes the
audio output. But it is not reported as such causing e.g. PulseAudio to
accidentally mute the device when selecting a low volume.
Fix this by applying the existing quirk for this kind of issue when the
device is detected.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311201400.235892-1-lars@metafoo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
In preparation for supporting the newly introduced IPC version in the SOF
firmware, this patchset adds the changes required to make the
pcm_hw_params DSP op IPC agnostic.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
One important fix from Kai to restore DM1 L1 functionality, one
important update from Peter to use DMA trace buffers as capture-only
and sync them and a couple of minor updates for Intel/SOF platforms.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A continuation of cleanup work of Intel SST solutions found in
sound/soc/intel/. With two major chapters released last year catpt [1]
and removal of haswell solution [2], time has come for Skylake-driver.
Througout 2019, 2020 and 2021 Skylake-driver has had many fixes applied
and even attempts of refactors as seen in fundamental overhaul [3], IPC
flow adjustments [4] and LARGE_CONFIG overhaul [5] series.
Unfortunately, story repeats itself - problems are found within the core
of a driver. Painting it with different colors does not change the fact
that is it still a house of cards. As changes needed to address those
issues would make Skylake solution incompatible with its previous
revisions, a decision has been made to provide a new solution instead.
In time it would deprecate and replace Skylake-driver.
That solution has been called AVS - from AudioDSP architecture name:
Audio-Voice-Speech. It is meant to provide support for the exact same
range of platforms as its predecessor: SKL, KBL, AML and APL.
Note: this series is dependent upon HDA-series [6] which exposes several
codec-organization functions allowing for reduced code size on
avs-driver side.
Note: this series does not add fully functional driver as its size would
get out of control. Here, focus is put on adding IPC protocol and code
loading code.
Compared to SKL and KBL, more recent cAVS platforms are meant to re-use
one of HDAudio streams during boot procedure causing CLDMA to become
obsolete. Once transferred, given stream is returned to pool available
for audio streaming.
Module loading handler is stub as library and module code became
inseparable in later firmware generations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CLDMA transfer implemented, make use of it to shape firmware,
library and module loading routines for SKL and KBL platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-17-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKL and KBL rely on a dedicated HDAudio DMA stream for code loading and
authentication. The implementation of this specific mechanism for
SKL-based platforms re-uses HDAudio DMA (streaming) functions found in
HDA library to avoid duplication of functionality.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code loading is a complex procedure and requires combined effort of DMA
and IPCs. With IPCs already in place, lay out ground for specific DMA
transfer operations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wrap elementary DSP-core operations and resource control into more
complex handlers. This is done to reduce the number of invocations of
wrapped operations throughout the driver as order of operations matters -
most flows involve register manipulation and IPCs combined.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare structures and constants for all modules being part of basefw
binary. These are used in streaming operations to communicate the needs
of software to firmware side.
While adding module types, append handler for SET_SINK_FORMAT runtime
for COPIER module which allows for configuration of output pin other
than the default one (0).
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With basefw runtime parameter handlers added, implement utility
functions to ease pipelines and modules allocation. IDA is enlisted to
help with that.
As firmware is modular and multiple binaries can be loaded on-demand
depending on the streaming scenario, custom firmware caching mechanism
is added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module may expose a range of runtime parameters. For basefw,
implement handlers for: FIRMWARE_CONFIG, HARDWARE_CONFIG and
MODULES_INFO. These are used by driver to dynamically allocate resources
in respect to platform details, reducing number of hardcodes and code
duplications that would otherwise be needed to be defined within the
driver code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ROM requests are messages initiated by Host to alter firmware early boot
process. They specify whether the next boot should be a fresh start or if
IMR can be used to speed things up.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio DSP supports low power states i.e.: transitions between D0 and D3
and D0-substates in form of D0i0 and D0i3. That process is a combination
of core and IPC operations. Here, Dx and D0ix IPC handlers are added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware modules implement processing algorithms. Their lifecycle,
similarly to pipelines is being controlled by IPCs: initialization,
deletion and (un)binding.
Modules can be configured at runtime - runtime parameters. This is done
with help of LARGE_CONFIG IPCs: getter and setter.
Due to firmware limitations, LARGE_CONFIG_GET handler implementation
does not support retrieving payload with size larger than IPC inbox
window size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pipeline represents a scheduling entity. Their existence as well as
their state machine is controlled through CREATE_PIPELINE,
DELETE_PIPELINE and SET_PIPELINE_STATE IPCs.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before firmware and its modules can be used, they have to be loaded.
Code loading process is complex and is a combination of DMA and IPC
operations. Here, IPC part is being added and accounts for CLDMA and HDA
mechanisms both.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the IPC between Intel audio firmware and kernel driver. The
IPC allows transmission of requests, handling of responses as well as
unsolicited (i.e. firmware-generated) notifications.
A subscription mechanism is added to enable different parts of the
driver to register for specific notifications.
The part of the DSP boot process that involves sending ROM message
requires an extra step - must be followed by unstall operation of
MAIN_CORE. All other types of messages do not require such specific
handling, so separate set of functions is provided for sending these.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare base structures and core DSP operations for the avs solution.
The base structures describe PCI HDAudio bus device and platform-type
differentiations. First set of operations added controls the lifecycle
of any Audio DSP core: (un)powering, (un)resetting and (un)stalling.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for more flexibility i.e. populating component DAIs dynamically
during its initialization, without being limited to topology loading
procedure, expose snd_soc_register(), snd_soc_dapm_new_dai_widgets() and
snd_soc_dapm_free_widget() functions.
Allows users to first check available resources e.g. number of PCMs
supported by HDAudio codec before allocating the number of DAPM
widgets needed. This prevents superfluous objects from being created or
allows driver to adjust to situation when resources are limited.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.
Fixes: 150db8c5af ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Playback or capture errors are seen when clock is reset during an active
stage of DAI. Presently this scenario happens when DAI has both playback
and capture sessions running and one of these finishes first which will
be followed by clock rate reset. The remaining active session will be
affected in such case.
Address this problem by allowing clock rate reset to happen only when
the DAI is no more active.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1646910999-2501-1-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio hardware is possibly used in the firmware stage, so resetting audio
hardware before regcache records default register values is required.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308072435.22460-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All users have been converted to use the IPC agnostic
set_stream_data_offsett()
Remove all code related to the old API.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral
set_stream_data_offset().
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch from the IPC dependent ipc_pcm_params() ops to the IPC neutral
set_stream_data_offset().
Remove the no longer used hda_ipc_pcm_params() function as well.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation for the generic set_stream_data_offset() callback to be
used by HDA platforms.
Convert the hda_ipc_pcm_params() to a wrapper for the new function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add implementation for the generic set_stream_data_offset() callback in
core to be used by platforms.
Convert the sof_ipc_pcm_params() to a wrapper for the new function.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AMD is only implementing an empty function to pass the required test and
it is going to be deprecated in favor of the IPC agnostic
set_stream_data_offset() callback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each running audio stream's data have distinct start offset within the
stream mailbox area from/to where the host can read/write.
Instead of using the struct sof_ipc_pcm_params_reply to configure this
offset, add an optional callback which is IPC agnostic.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call directly for snd_sof_ipc_pcm_params() from sof_pcm_hw_params() and
remove the wrapper for it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not send IPC structure directly via pcm_hw_params to make it IPC
agnostic.
A new struct is created to retrieve the needed platform parameters and if
there is a need it can be extended with new options.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The implementation for snd_sof_ipc_stream_pcm_params() does not exist,
remove it from the header file.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220310042720.976809-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RT711 sdca sdw is added with SDW0 link for ADL-PS platform.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Taniks has four max98357a on SSP2 with Demux and EQ in topology to
implement a 2-way speaker system.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Buffers allocated with snd_dma_alloc_pages() will have DMA direction
DMA_BIDIRECTIONAL. The trace data memory is only used for one DMA
direction: DMA_FROM_DEVICE, DMA only writes there, never reads.
We also need to do a sync before accessing (reading with CPU) from the
trace data buffer to copy it to user space.
Note: snd_dma_buffer_sync() is also used for normal playback and capture
streams to make sure that the data is available for the DMA or CPU.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220310171651.249385-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
