When the endpoint used by the initial subflow is removed and re-added
later, the PM has to force the ID 0, it is a special case imposed by the
MPTCP specs.
Note that the endpoint should then need to be re-added reusing the same
ID.
Fixes: 3ad14f54bd ("mptcp: more accurate MPC endpoint tracking")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 0602129286 ("net: add low latency socket poll")
Fixes: 9a3c71aa80 ("net: convert low latency sockets to sched_clock()")
Fixes: 3708983452 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* wfx: fix for open network connection
* iwlwifi: fix for hibernate (due to fast resume feature)
* iwlwifi: fix for a few warnings that were recently added
(had previously been messages not warnings)
Previously broken:
* mwifiex: fix static structures used for per-device data
* iwlwifi: some harmless FW related messages were tagged
too high priority
* iwlwifi: scan buffers weren't checked correctly
* mac80211: SKB leak on beacon error path
* iwlwifi: fix ACPI table interop with certain BIOSes
* iwlwifi: fix locking for link selection
* mac80211: fix SSID comparison in beacon validation
-----BEGIN PGP SIGNATURE-----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=024u
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Regressions:
* wfx: fix for open network connection
* iwlwifi: fix for hibernate (due to fast resume feature)
* iwlwifi: fix for a few warnings that were recently added
(had previously been messages not warnings)
Previously broken:
* mwifiex: fix static structures used for per-device data
* iwlwifi: some harmless FW related messages were tagged
too high priority
* iwlwifi: scan buffers weren't checked correctly
* mac80211: SKB leak on beacon error path
* iwlwifi: fix ACPI table interop with certain BIOSes
* iwlwifi: fix locking for link selection
* mac80211: fix SSID comparison in beacon validation
* tag 'wireless-2024-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: clear trans->state earlier upon error
wifi: wfx: repair open network AP mode
wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap()
wifi: iwlwifi: mvm: don't wait for tx queues if firmware is dead
wifi: iwlwifi: mvm: allow 6 GHz channels in MLO scan
wifi: iwlwifi: mvm: pause TCM when the firmware is stopped
wifi: iwlwifi: fw: fix wgds rev 3 exact size
wifi: iwlwifi: mvm: take the mutex before running link selection
wifi: iwlwifi: mvm: fix iwl_mvm_max_scan_ie_fw_cmd_room()
wifi: iwlwifi: mvm: fix iwl_mvm_scan_fits() calculation
wifi: iwlwifi: lower message level for FW buffer destination
wifi: iwlwifi: mvm: fix hibernation
wifi: mac80211: fix beacon SSID mismatch handling
wifi: mwifiex: duplicate static structs used in driver instances
====================
Link: https://patch.msgid.link/20240828100151.23662-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_sf_do_5_2_4_dupcook() currently calls security_sctp_assoc_request()
on new_asoc, but as it turns out, this association is always discarded
and the LSM labels never get into the final association (asoc).
This can be reproduced by having two SCTP endpoints try to initiate an
association with each other at approximately the same time and then peel
off the association into a new socket, which exposes the unitialized
labels and triggers SELinux denials.
Fix it by calling security_sctp_assoc_request() on asoc instead of
new_asoc. Xin Long also suggested limit calling the hook only to cases
A, B, and D, since in cases C and E the COOKIE ECHO chunk is discarded
and the association doesn't enter the ESTABLISHED state, so rectify that
as well.
One related caveat with SELinux and peer labeling: When an SCTP
connection is set up simultaneously in this way, we will end up with an
association that is initialized with security_sctp_assoc_request() on
both sides, so the MLS component of the security context of the
association will get swapped between the peers, instead of just one side
setting it to the other's MLS component. However, at that point
security_sctp_assoc_request() had already been called on both sides in
sctp_sf_do_unexpected_init() (on a temporary association) and thus if
the exchange didn't fail before due to MLS, it won't fail now either
(most likely both endpoints have the same MLS range).
Tested by:
- reproducer from https://src.fedoraproject.org/tests/selinux/pull-request/530
- selinux-testsuite (https://github.com/SELinuxProject/selinux-testsuite/)
- sctp-tests (https://github.com/sctp/sctp-tests) - no tests failed
that wouldn't fail also without the patch applied
Fixes: c081d53f97 ("security: pass asoc to sctp_assoc_request and sctp_sk_clone")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM/SELinux)
Link: https://patch.msgid.link/20240826130711.141271-1-omosnace@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: close subflow when receiving TCP+FIN and misc.
Here are different fixes:
Patch 1 closes the subflow after having received a FIN, instead
of leaving it half-closed until the end of the MPTCP connection.
A fix for v5.12.
Patch 2 validates the previous patch.
Patch 3 is a fix for a recent fix to check both directions for the
backup flag. It can follow the 'Fixes' commit and be backported up
to v5.7.
Patch 4 adds a missing \n at the end of pr_debug(), causing debug
messages to be displayed with a delay, which confuses the debugger.
A fix for v5.6.
====================
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-0-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Looking only at the 'backup' flag can make sense in some cases, but it
is not the behaviour of the default packet scheduler when selecting
paths.
As explained in the commit b6a66e521a ("mptcp: sched: check both
directions for backup"), the packet scheduler should look at both flags,
because that was the behaviour from the beginning: the 'backup' flag was
set by accident instead of the 'request_bkup' one. Now that the latter
has been fixed, get_retrans() needs to be adapted as well.
Fixes: b6a66e521a ("mptcp: sched: check both directions for backup")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a peer decides to close one subflow in the middle of a connection
having multiple subflows, the receiver of the first FIN should accept
that, and close the subflow on its side as well. If not, the subflow
will stay half closed, and would even continue to be used until the end
of the MPTCP connection or a reset from the network.
The issue has not been seen before, probably because the in-kernel
path-manager always sends a RM_ADDR before closing the subflow. Upon the
reception of this RM_ADDR, the other peer will initiate the closure on
its side as well. On the other hand, if the RM_ADDR is lost, or if the
path-manager of the other peer only closes the subflow without sending a
RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it,
leaving the subflow half-closed.
So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if
the MPTCP connection has not been closed before with a DATA_FIN, the
kernel owning the subflow schedules its worker to initiate the closure
on its side as well.
This issue can be easily reproduced with packetdrill, as visible in [1],
by creating an additional subflow, injecting a FIN+ACK before sending
the DATA_FIN, and expecting a FIN+ACK in return.
Fixes: 40947e1399 ("mptcp: schedule worker when subflow is closed")
Cc: stable@vger.kernel.org
Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-1-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have some problem closing zero-window fin-wait-1 tcp sockets in our
environment. This patch come from the investigation.
Previously tcp_abort only sends out reset and calls tcp_done when the
socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only
purging the write queue, but not close the socket and left it to the
timer.
While purging the write queue, tp->packets_out and sk->sk_write_queue
is cleared along the way. However tcp_retransmit_timer have early
return based on !tp->packets_out and tcp_probe_timer have early
return based on !sk->sk_write_queue.
This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched
and socket not being killed by the timers, converting a zero-windowed
orphan into a forever orphan.
This patch removes the SOCK_DEAD check in tcp_abort, making it send
reset to peer and close the socket accordingly. Preventing the
timer-less orphan from happening.
According to Lorenzo's email in the v1 thread, the check was there to
prevent force-closing the same socket twice. That situation is handled
by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is
already closed.
The -ENOENT code comes from the associate patch Lorenzo made for
iproute2-ss; link attached below, which also conform to RFC 9293.
At the end of the patch, tcp_write_queue_purge(sk) is removed because it
was already called in tcp_done_with_error().
p.s. This is the same patch with v2. Resent due to mis-labeled "changes
requested" on patchwork.kernel.org.
Link: https://patchwork.ozlabs.org/project/netdev/patch/1450773094-7978-3-git-send-email-lorenzo@google.com/
Fixes: c1e64e298b ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Xueming Feng <kuro@kuroa.me>
Tested-by: Lorenzo Colitti <lorenzo@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240826102327.1461482-1-kuro@kuroa.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.)
Fixes: 1e3a3abd8b ("gtp: make GTP sockets in gtp_newlink optional")
Cc: Andreas Schultz <aschultz@tpip.net>
Cc: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240825191638.146748-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianbo Liu says:
====================
Fixes for IPsec over bonding
This patchset provides bug fixes for IPsec over bonding driver.
It adds the missing xdo_dev_state_free API, and fixes "scheduling while
atomic" by using mutex lock instead.
Series generated against:
commit c07ff8592d ("netem: fix return value if duplicate enqueue fails")
====================
Link: https://patch.msgid.link/20240823031056.110999-1-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a local variable for slave->dev, to prepare for the lock change in
the next patch. There is no functionality change.
Fixes: 9a5605505d ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-3-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add this implementation for bonding, so hardware resources can be
freed from the active slave after xfrm state is deleted. The netdev
used to invoke xdo_dev_state_free callback, is saved in the xfrm state
(xs->xso.real_dev), which is also the bond's active slave. To prevent
it from being freed, acquire netdev reference before leaving RCU
read-side critical section, and release it after callback is done.
And call it when deleting all SAs from old active real interface while
switching current active slave.
Fixes: 9a5605505d ("bonding: Add struct bond_ipesc to manage SA")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240823031056.110999-2-jianbol@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fq_dequeue() has a complex logic to find packets in one of the 3 bands.
As Neal found out, it is possible that one band has a deficit smaller
than its weight. fq_dequeue() can return NULL while some packets are
elligible for immediate transmit.
In this case, more than one iteration is needed to refill pband->credit.
With default parameters (weights 589824 196608 65536) bug can trigger
if large BIG TCP packets are sent to the lowest priority band.
Bisected-by: John Sperbeck <jsperbeck@google.com>
Diagnosed-by: Neal Cardwell <ncardwell@google.com>
Fixes: 29f834aa32 ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20240824181901.953776-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With recent work to the doorbell workaround code a small hole was
introduced that could cause a tx_timeout. This happens if the rx
dbell_deadline goes beyond the netdev watchdog timeout set by the driver
(i.e. 2 seconds). Fix this by changing the netdev watchdog timeout to 5
seconds and reduce the max rx dbell_deadline to 4 seconds.
The test that can reproduce the issue being fixed is a multi-queue send
test via pktgen with the "burst" setting to 1. This causes the queue's
doorbell to be rung on every packet sent to the driver, which may result
in the device missing doorbells due to the high doorbell rate.
Cc: stable@vger.kernel.org
Fixes: 4ded136c78 ("ionic: add work item for missed-doorbell check")
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240822192557.9089-1-brett.creeley@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
RSN IE missing in beacon is normal in open networks.
Avoid returning -EINVAL in this case.
Steps to reproduce:
$ cat /etc/wpa_supplicant.conf
network={
ssid="testNet"
mode=2
key_mgmt=NONE
}
$ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf
nl80211: Beacon set failed: -22 (Invalid argument)
Failed to set beacon parameters
Interface initialization failed
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
wlan0: Unable to setup interface.
Failed to initialize AP interface
After the change:
$ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
Cc: stable@vger.kernel.org
Fixes: fe0a7776d4 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com
Crash is seen on AM64x 10M link when connecting / disconnecting multiple
times.
The fix for this is to enable quirk_10m_link_issue for AM64x.
Fixes: b256e13378 ("net: ti: icssg-prueth: Add AM64x icssg support")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20240823120412.1262536-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btintel: Allow configuring drive strength of BRI
- hci_core: Fix not handling hibernation actions
- btnxpuart: Fix random crash seen while removing driver
-----BEGIN PGP SIGNATURE-----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=m4CK
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel: Allow configuring drive strength of BRI
- hci_core: Fix not handling hibernation actions
- btnxpuart: Fix random crash seen while removing driver
* tag 'for-net-2024-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix not handling hibernation actions
Bluetooth: btnxpuart: Fix random crash seen while removing driver
Bluetooth: btintel: Allow configuring drive strength of BRI
====================
Link: https://patch.msgid.link/20240823200008.65241-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In 'ieee80211_beacon_get_ap()', free allocated skb in case of error
returned by 'ieee80211_beacon_protect()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240805142035.227847-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a WARNING in iwl_trans_wait_tx_queues_empty() (that was
recently converted from just a message), that can be hit if we
wait for TX queues to become empty after firmware died. Clearly,
we can't expect anything from the firmware after it's declared dead.
Don't call iwl_trans_wait_tx_queues_empty() in this case. While it could
be a good idea to stop the flow earlier, the flush functions do some
maintenance work that is not related to the firmware, so keep that part
of the code running even when the firmware is not running.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.a7cbd794cee9.I44a739fbd4ffcc46b83844dd1c7b2eb0c7b270f6@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
MLO internal scan may include 6 GHz channels. Since the 6 GHz scan
indication is not set, the channel flags are set incorrectly, which
leads to a firmware assert.
Since the MLO scan may include 6 GHz and non 6 GHz channels in one
request, add support for non-PSC 6 GHz channels (PSC channels are
already supported) when the 6 GHz indication is not set.
Fixes: 38b3998dfb ("wifi: iwlwifi: mvm: Introduce internal MLO passive scan")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.04807f8213b2.Idd09d4366df92a74853649c1a520b7f0f752d1ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Not doing so will make us send a host command to the transport while the
firmware is not alive, which will trigger a WARNING.
bad state = 0
WARNING: CPU: 2 PID: 17434 at drivers/net/wireless/intel/iwlwifi/iwl-trans.c:115 iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
RIP: 0010:iwl_trans_send_cmd+0x1cb/0x1e0 [iwlwifi]
Call Trace:
<TASK>
iwl_mvm_send_cmd+0x40/0xc0 [iwlmvm]
iwl_mvm_config_scan+0x198/0x260 [iwlmvm]
iwl_mvm_recalc_tcm+0x730/0x11d0 [iwlmvm]
iwl_mvm_tcm_work+0x1d/0x30 [iwlmvm]
process_one_work+0x29e/0x640
worker_thread+0x2df/0x690
? rescuer_thread+0x540/0x540
kthread+0x192/0x1e0
? set_kthread_struct+0x90/0x90
ret_from_fork+0x22/0x30
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.5abe71ca1b6b.I97a968cb8be1f24f94652d9b110ecbf6af73f89e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Check size of WGDS revision 3 is equal to 8 entries size with some header,
but doesn't depend on the number of used entries. Check that used entries
are between min and max but allow more to be present than are used to fix
operation with some BIOSes that have such data.
Fixes: 97f8a3d161 ("iwlwifi: ACPI: support revision 3 WGDS tables")
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_select_links is called by the link selection worker and it
requires the mutex.
Take it in the link selection worker.
This logic used to run from iwl_mvm_rx_umac_scan_complete_notif which
had the mvm->mutex held. This was changed to run in a worker holding the
wiphy mutex, but we also need the mvm->mutex.
Fixes: 2e194efa38 ("wifi: iwlwifi: mvm: Fix race in scan completion")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.0cacecd5db1e.Iaca38a078592b69bdd06549daf63408ccf1810e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The calculation should consider also the 6GHz IE's len, fix that.
In addition, in iwl_mvm_sched_scan_start() the scan_fits helper is
called only in case non_psc_incldued is true, but it should be called
regardless, fix that as well.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.7db825442fd2.I99f4d6587709de02072fd57957ec7472331c6b1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fast resume is a feature that was recently introduced to speed up the
resume time. It basically keeps the firmware alive while the system
is suspended and that avoids starting again the whole device.
This flow can't work for hibernation, since when the system boots,
before the frozen image is loaded, the kernel may touch the device. As a
result, we can't assume the device is in the exact same state as before
the hibernation.
Detect that we are resuming from hibernation through the PCI device and
forbid the fast resume flow. We also need to shut down the device
cleanly when that happens.
In addition, in case the device is power gated during S3, we won't be
able to keep the device alive. Detect this situation with BE200 at least
with the help of the CSR_FUNC_SCRATCH register and reset the device upon
resume if it was power gated during S3.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.24eb3b19e74f.I3837810318dbef0a0a773cf4c4fcf89cdc6fdbd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes not handling hibernation actions on suspend notifier so they
are treated in the same way as regular suspend actions.
Fixes: 9952d90ea2 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls
complete(&ctx->comp_event) before posting the wqe back. It's
possible that other callers, like mana_create_txq(), start the
next round of mana_hwc_send_request() before the posting of wqe.
And if the HW is fast enough to respond, it can hit no_wqe error
on the HW channel, then the response message is lost. The mana
driver may fail to create queues and open, because of waiting for
the HW response and timed out.
Sample dmesg:
[ 528.610840] mana 39d4:00:02.0: HWC: Request timed out!
[ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0
[ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110
To fix it, move posting of rx wqe before complete(&ctx->comp_event).
Cc: stable@vger.kernel.org
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As we discussed in the room at netdevconf earlier this week,
drop the requirement for special comment style for netdev.
For checkpatch, the general check accepts both right now, so
simply drop the special request there as well.
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have seen the WARN_ON(smp_processor_id() != cpu) firing
in pktgen_thread_worker() during tests.
We must use cpus_read_lock()/cpus_read_unlock()
around the for_each_online_cpu(cpu) loop.
While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240821175339.1191779-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution
of tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=htcO
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- virtio_net: avoid crash on resume - move netdev_tx_reset_queue()
call before RX napi enable
Current release - new code bugs:
- net/mlx5e: fix page leak and incorrect header release w/ HW GRO
Previous releases - regressions:
- udp: fix receiving fraglist GSO packets
- tcp: prevent refcount underflow due to concurrent execution of
tcp_sk_exit_batch()
Previous releases - always broken:
- ipv6: fix possible UAF when incrementing error counters on output
- ip6: tunnel: prevent merging of packets with different L2
- mptcp: pm: fix IDs not being reusable
- bonding: fix potential crashes in IPsec offload handling
- Bluetooth: HCI:
- MGMT: add error handling to pair_device() to avoid a crash
- invert LE State quirk to be opt-out rather then opt-in
- fix LE quote calculation
- drv: dsa: VLAN fixes for Ocelot driver
- drv: igb: cope with large MAX_SKB_FRAGS Kconfig settings
- drv: ice: fi Rx data path on architectures with PAGE_SIZE >= 8192
Misc:
- netpoll: do not export netpoll_poll_[disable|enable]()
- MAINTAINERS: update the list of networking headers"
* tag 'net-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
s390/iucv: Fix vargs handling in iucv_alloc_device()
net: ovs: fix ovs_drop_reasons error
net: xilinx: axienet: Fix dangling multicast addresses
net: xilinx: axienet: Always disable promiscuous mode
MAINTAINERS: Mark JME Network Driver as Odd Fixes
MAINTAINERS: Add header files to NETWORKING sections
MAINTAINERS: Add limited globs for Networking headers
MAINTAINERS: Add net_tstamp.h to SOCKET TIMESTAMPING section
MAINTAINERS: Add sonet.h to ATM section of MAINTAINERS
octeontx2-af: Fix CPT AF register offset calculation
net: phy: realtek: Fix setting of PHY LEDs Mode B bit on RTL8211F
net: ngbe: Fix phy mode set to external phy
netfilter: flowtable: validate vlan header
bnxt_en: Fix double DMA unmapping for XDP_REDIRECT
ipv6: prevent possible UAF in ip6_xmit()
ipv6: fix possible UAF in ip6_finish_output2()
ipv6: prevent UAF in ip6_send_skb()
netpoll: do not export netpoll_poll_[disable|enable]()
selftests: mlxsw: ethtool_lanes: Source ethtool lib from correct path
udp: fix receiving fraglist GSO packets
...
iucv_alloc_device() gets a format string and a varying number of
arguments. This is incorrectly forwarded by calling dev_set_name() with
the format string and a va_list, while dev_set_name() expects also a
varying number of arguments.
Symptoms:
Corrupted iucv device names, which can result in log messages like:
sysfs: cannot create duplicate filename '/devices/iucv/hvc_iucv1827699952'
Fixes: 4452e8ef8c ("s390/iucv: Provide iucv_alloc_device() / iucv_release_device()")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1228425
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20240821091337.3627068-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".
And as Adrian tested, without the patch, adding flow to drop packets
results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR
With the patch, the same results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION
Fix this by initializing ovs_drop_reasons with index.
Fixes: 9d802da40b ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vnhf
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 disable BH when collecting stats via hardware offload to ensure
concurrent updates from packet path do not result in losing stats.
From Sebastian Andrzej Siewior.
Patch #2 uses write seqcount to reset counters serialize against reader.
Also from Sebastian Andrzej Siewior.
Patch #3 ensures vlan header is in place before accessing its fields,
according to KMSAN splat triggered by syzbot.
* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: validate vlan header
netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================
Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sean Anderson says:
====================
net: xilinx: axienet: Multicast fixes and improvements [part]
====================
First two patches of the series which are fixes.
Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
