mirror of
https://github.com/torvalds/linux.git
synced 2024-11-28 15:11:31 +00:00
886e4757f4
1310105 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Daniel Borkmann
|
db123e4230 |
selftests/bpf: Add test case for delta propagation
Add a small BPF verifier test case to ensure that alu32 additions to registers are not subject to linked scalar delta tracking. # ./vmtest.sh -- ./test_progs -t verifier_linked_scalars [...] ./test_progs -t verifier_linked_scalars [ 1.413138] tsc: Refined TSC clocksource calibration: 3407.993 MHz [ 1.413524] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fcd52370, max_idle_ns: 440795242006 ns [ 1.414223] clocksource: Switched to clocksource tsc [ 1.419640] bpf_testmod: loading out-of-tree module taints kernel. [ 1.420025] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel #500/1 verifier_linked_scalars/scalars: find linked scalars:OK #500 verifier_linked_scalars:OK Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED [ 1.590858] ACPI: PM: Preparing to enter system sleep state S5 [ 1.591402] reboot: Power down [...] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20241016134913.32249-3-daniel@iogearbox.net |
||
|
Daniel Borkmann
|
3e9e708757 |
bpf: Fix print_reg_state's constant scalar dump
print_reg_state() should not consider adding reg->off to reg->var_off.value
when dumping scalars. Scalars can be produced with reg->off != 0 through
BPF_ADD_CONST, and thus as-is this can skew the register log dump.
Fixes:
|
||
|
Daniel Borkmann
|
3878ae04e9 |
bpf: Fix incorrect delta propagation between linked registers
Nathaniel reported a bug in the linked scalar delta tracking, which can lead
to accepting a program with OOB access. The specific code is related to the
sync_linked_regs() function and the BPF_ADD_CONST flag, which signifies a
constant offset between two scalar registers tracked by the same register id.
The verifier attempts to track "similar" scalars in order to propagate bounds
information learned about one scalar to others. For instance, if r1 and r2
are known to contain the same value, then upon encountering 'if (r1 != 0x1234)
goto xyz', not only does it know that r1 is equal to 0x1234 on the path where
that conditional jump is not taken, it also knows that r2 is.
Additionally, with env->bpf_capable set, the verifier will track scalars
which should be a constant delta apart (if r1 is known to be one greater than
r2, then if r1 is known to be equal to 0x1234, r2 must be equal to 0x1233.)
The code path for the latter in adjust_reg_min_max_vals() is reached when
processing both 32 and 64-bit addition operations. While adjust_reg_min_max_vals()
knows whether dst_reg was produced by a 32 or a 64-bit addition (based on the
alu32 bool), the only information saved in dst_reg is the id of the source
register (reg->id, or'ed by BPF_ADD_CONST) and the value of the constant
offset (reg->off).
Later, the function sync_linked_regs() will attempt to use this information
to propagate bounds information from one register (known_reg) to others,
meaning, for all R in linked_regs, it copies known_reg range (and possibly
adjusting delta) into R for the case of R->id == known_reg->id.
For the delta adjustment, meaning, matching reg->id with BPF_ADD_CONST, the
verifier adjusts the register as reg = known_reg; reg += delta where delta
is computed as (s32)reg->off - (s32)known_reg->off and placed as a scalar
into a fake_reg to then simulate the addition of reg += fake_reg. This is
only correct, however, if the value in reg was created by a 64-bit addition.
When reg contains the result of a 32-bit addition operation, its upper 32
bits will always be zero. sync_linked_regs() on the other hand, may cause
the verifier to believe that the addition between fake_reg and reg overflows
into those upper bits. For example, if reg was generated by adding the
constant 1 to known_reg using a 32-bit alu operation, then reg->off is 1
and known_reg->off is 0. If known_reg is known to be the constant 0xFFFFFFFF,
sync_linked_regs() will tell the verifier that reg is equal to the constant
0x100000000. This is incorrect as the actual value of reg will be 0, as the
32-bit addition will wrap around.
Example:
0: (b7) r0 = 0; R0_w=0
1: (18) r1 = 0x80000001; R1_w=0x80000001
3: (37) r1 /= 1; R1_w=scalar()
4: (bf) r2 = r1; R1_w=scalar(id=1) R2_w=scalar(id=1)
5: (bf) r4 = r1; R1_w=scalar(id=1) R4_w=scalar(id=1)
6: (04) w2 += 2147483647; R2_w=scalar(id=1+2147483647,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
7: (04) w4 += 0 ; R4_w=scalar(id=1+0,smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
8: (15) if r2 == 0x0 goto pc+1
10: R0=0 R1=0xffffffff80000001 R2=0x7fffffff R4=0xffffffff80000001 R10=fp0
What can be seen here is that r1 is copied to r2 and r4, such that {r1,r2,r4}.id
are all the same which later lets sync_linked_regs() to be invoked. Then, in
a next step constants are added with alu32 to r2 and r4, setting their ->off,
as well as id |= BPF_ADD_CONST. Next, the conditional will bind r2 and
propagate ranges to its linked registers. The verifier now believes the upper
32 bits of r4 are r4=0xffffffff80000001, while actually r4=r1=0x80000001.
One approach for a simple fix suitable also for stable is to limit the constant
delta tracking to only 64-bit alu addition. If necessary at some later point,
BPF_ADD_CONST could be split into BPF_ADD_CONST64 and BPF_ADD_CONST32 to avoid
mixing the two under the tradeoff to further complicate sync_linked_regs().
However, none of the added tests from
|
||
Jordan Rome
|
ee8c7c6c3f |
bpf: Properly test iter/task tid filtering
Previously test_task_tid was setting `linfo.task.tid` to `getpid()` which is the same as `gettid()` for the parent process. Instead create a new child thread and set `linfo.task.tid` to `gettid()` to make sure the tid filtering logic is working as expected. Signed-off-by: Jordan Rome <linux@jordanrome.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20241016210048.1213935-2-linux@jordanrome.com |
||
|
Jordan Rome
|
9495a5b731 |
bpf: Fix iter/task tid filtering
In userspace, you can add a tid filter by setting
the "task.tid" field for "bpf_iter_link_info".
However, `get_pid_task` when called for the
`BPF_TASK_ITER_TID` type should have been using
`PIDTYPE_PID` (tid) instead of `PIDTYPE_TGID` (pid).
Fixes:
|
||
Maurizio Lombardi
|
26bc0a81f6 |
nvme-pci: fix race condition between reset and nvme_dev_disable()
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes:
|
||
Linus Torvalds
|
6efbea77b3 |
arm64 fixes for -rc4
- Disable software tag-based KASAN when compiling with GCC, as functions are incorrectly instrumented leading to a crash early during boot. - Fix pkey configuration for kernel threads when POE is enabled. - Fix invalid memory accesses in uprobes when targetting load-literal instructions. -----BEGIN PGP SIGNATURE----- iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmcPrzQQHHdpbGxAa2Vy bmVsLm9yZwAKCRC3rHDchMFjNIr6B/wN+o1xI7Fv/QdlaTuKYLvOOg/XTl6sbUDj YssxtjhpKuaFVG4zJHNsWvgUqO+YCM7m3F1L8LVPMF7l2xoKtRTIB1Ye315hTjYm dW5Te6xBMVKF8SVxE8sBbZobdokIW1JNPBrvGvHO3d5ujmofzwHU8RNMXuTUItRw z85Qy75FkEDTEbsWhS3VL5HOgEr+k0TYDRa8SXwKWVj7/rYna3tO39kIdS5dt9VX wDJbnxtWJMhiHmDnevFFhBkSZrips12P1Rb6HUSmhpUJh0Rk4TAZntSl2f/lr+jA PuboBbSG68UOCwAHoNmTcLdFhkiNaiyw4w2F7hk2A6aNRtme+bT0 =M/ug -----END PGP SIGNATURE----- Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: - Disable software tag-based KASAN when compiling with GCC, as functions are incorrectly instrumented leading to a crash early during boot - Fix pkey configuration for kernel threads when POE is enabled - Fix invalid memory accesses in uprobes when targetting load-literal instructions * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: kasan: Disable Software Tag-Based KASAN with GCC Documentation/protection-keys: add AArch64 to documentation arm64: set POR_EL0 for kernel threads arm64: probes: Fix uprobes for big-endian kernels arm64: probes: Fix simulate_ldr*_literal() arm64: probes: Remove broken LDR (literal) uprobe support |
||
|
Linus Torvalds
|
c16e5c94c8 |
soc: fixes for 6.12
Most of the fixes this time are for platform specific drivers, addressing issues found through build testing on freescale, ep93xx, starfive, and npcm platforms, as as well as the ffa firmware. The fixes for the scmi firmware driver address compatibility problems found on broadcom machines. There are only two devicetree fixes, addressing incorrect in configuration on broadcom and marvell machines. The changes to the Documentation and MAINTAINERS files are for clarification only. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcRMFQACgkQYKtH/8kJ Uiflnw//QtSzQtwZpe9LQBq+1jS/q2y1dAsgNqP+CYB0nNsO6MSIEUDpjh8TRYpP uuRg9oN3xdtT6xlFGGEMdsOc+DCcbOakW+CFoxgvvxi2AiFpvdtiZpHgse5DtVfl HQYSSLQvttwtjDlNjPmw58F1GR+3FzXh0mJS8N03bP+k8yJxVrSff4TJTFEHBLrG mrorC+qfBaB7djvmjBolPNt3qMB5pXVYio3ZyflHFdxxUHjnrBVkWpmLE2BQksJt I5nbl8vFqfLhLFCsqyCm4gC0gDSdxsWhHuRpOzXYQJKHxWpg/uYu4TOsKxVAc/Nc nZNOdeQ0C7pU6yiyDD1jqWW0l98itHVQOvz6dxE2wZpL1duOqQ7yx1DJfJw4V3PP Cn66mcp9Vrh0nYpZxhGfOs3wibhbJ0NQYhC4jaddVrxfcGuJc3jTR+bnkK+K+b8b nt7FlLe/vHFvaahGclgeg63wpTqmPAc0eSMF8YJDo1bTP8uF6Km6oXo/kaQQywBm C3mAXJn2rtn+4sPx2N3tjGAhnpK3cZZj/9QA82WjN/Cm7vzXwRgrt0j4S3weGxGI rPo2tNC8wJT+gXAPDWvRwyjqhOoCYbWgQ/9xkF5kQNe+cktvdU7gzGiejYhWl9Oz 3eLb6IfZbuMTsVWhQuNSJe4LAp+/18M0T0rpzbL3VIJ5XuP3n64= =h897 -----END PGP SIGNATURE----- Merge tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC fixes from Arnd Bergmann: "Most of the fixes this time are for platform specific drivers, addressing issues found through build testing on freescale, ep93xx, starfive, and npcm platforms, as as well as the ffa firmware. The fixes for the scmi firmware driver address compatibility problems found on broadcom machines. There are only two devicetree fixes, addressing incorrect in configuration on broadcom and marvell machines. The changes to the Documentation and MAINTAINERS files are for clarification only" * tag 'arm-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: firmware: arm_ffa: Avoid string-fortify warning caused by memcpy() firmware: arm_scmi: Queue in scmi layer for mailbox implementation firmware: arm_ffa: Avoid string-fortify warning in export_uuid() firmware: arm_scmi: Give SMC transport precedence over mailbox firmware: arm_scmi: Fix the double free in scmi_debugfs_common_setup() Documentation/process: maintainer-soc: clarify submitting patches dmaengine: cirrus: check that output may be truncated dmaengine: cirrus: ERR_CAST() ioremap error MAINTAINERS: use the canonical soc mailing list address and mark it as L: ARM: dts: bcm2837-rpi-cm3-io3: Fix HDMI hpd-gpio pin arm64: dts: marvell: cn9130-sr-som: fix cp0 mdio pin numbers soc: fsl: cpm1: qmc: Fix unused data compilation warning soc: fsl: cpm1: qmc: Do not use IS_ERR_VALUE() on error pointers reset: starfive: jh71x0: Fix accessing the empty member on JH7110 SoC reset: npcm: convert comma to semicolon |
||
|
Linus Torvalds
|
5c94bdab3a |
sound fixes for 6.12-rc4
A collection of small fixes, nothing really stands out. - Usual HD-audio quirks / device-specific fixes - Kconfig dependency fix for UM - A series of minor fixes for SoundWire - Updates of USB-audio LINE6 contact address -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmcRH54OHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE908g//Y+EXKVNOkt//gIR4lPput7L0xXuiw09YU6Hy DPyuApYSS9z3VfVOE215dmJpgINw9lS1q7zHMEncLFA56oLEB8gxpNrha93GCCVQ 79Ov4oiIvOZpl7SGdN3ijs3Xf+uyGd3qEyAlyfRe2MHGw1WG7vDAKSKWU5ss5SGU jai0t446Mxiyg5IkcHV0d0HP8+WlIayxergHihKrTgrQ1BwCdrcqt7KYF1vYPFZO g87pnqOJ608bOwdkEQ47PraNv91futyQr+S0XYr53BTsCxgZ/m+kUPRGV7cB76wL 2UosHKwIBTnvXW6rBVNAzcs3KveuIyCSWTfvUJUGOe6mhAh5+t5BwiZbQJK9x2Vc ragsZ2MIdXhymUJ7hLujQ4E/2JCzJJPdoZXXUZfWmp23yH/ei4ylrOr2D/LntZ5g NVADlxCYPlYxiF3Fd+rv21rW0Zkk8kjMWsCxomzF1uE+wrMgJMlgBYvEVxZbI+P7 sGluv5v51g85X1RDrsofCbzt0IgKQd7RjLj1/dcgH3qEZVU7uuVV/tacHIayXCxf GNHD09+Y93Uwt7CMSnUMCf0r9/64AHXLgeRQNsLb39qjGGTZZFzx5vIPJDKBdeoK ail9LcynfbWi73tHFbAd4hDelQUIRo3H6CNR1nOvI7SfweqywDmngW/OWanbmGPG VEBQ01Q= =YI8n -----END PGP SIGNATURE----- Merge tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, nothing really stands out: - Usual HD-audio quirks / device-specific fixes - Kconfig dependency fix for UM - A series of minor fixes for SoundWire - Updates of USB-audio LINE6 contact address" * tag 'sound-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/conexant - Use cached pin control for Node 0x1d on HP EliteOne 1000 G2 ALSA/hda: intel-sdw-acpi: add support for sdw-manager-list property read ALSA/hda: intel-sdw-acpi: simplify sdw-master-count property read ALSA/hda: intel-sdw-acpi: fetch fwnode once in sdw_intel_scan_controller() ALSA/hda: intel-sdw-acpi: cleanup sdw_intel_scan_controller ALSA: hda/tas2781: Add new quirk for Lenovo, ASUS, Dell projects ALSA: scarlett2: Add error check after retrieving PEQ filter values ALSA: hda/cs8409: Fix possible NULL dereference sound: Make CONFIG_SND depend on INDIRECT_IOMEM instead of UML ALSA: line6: update contact information ALSA: usb-audio: Fix NULL pointer deref in snd_usb_power_domain_set() ALSA: hda/conexant - Fix audio routing for HP EliteOne 1000 G2 ALSA: hda: Sound support for HP Spectre x360 16 inch model 2024 |
||
|
Linus Torvalds
|
07d6bf634b |
No contributions from subtrees.
Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=ukTi
-----END PGP SIGNATURE-----
Merge tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Current release - new code bugs:
- eth: mlx5: HWS, don't destroy more bwc queue locks than allocated
Previous releases - regressions:
- ipv4: give an IPv4 dev to blackhole_netdev
- udp: compute L4 checksum as usual when not segmenting the skb
- tcp/dccp: don't use timer_pending() in reqsk_queue_unlink().
- eth: mlx5e: don't call cleanup on profile rollback failure
- eth: microchip: vcap api: fix memory leaks in
vcap_api_encode_rule_test()
- eth: enetc: disable Tx BD rings after they are empty
- eth: macb: avoid 20s boot delay by skipping MDIO bus registration
for fixed-link PHY
Previous releases - always broken:
- posix-clock: fix missing timespec64 check in pc_clock_settime()
- genetlink: hold RCU in genlmsg_mcast()
- mptcp: prevent MPC handshake on port-based signal endpoints
- eth: vmxnet3: fix packet corruption in vmxnet3_xdp_xmit_frame
- eth: stmmac: dwmac-tegra: fix link bring-up sequence
- eth: bcmasp: fix potential memory leak in bcmasp_xmit()
Misc:
- add Andrew Lunn as a co-maintainer of all networking drivers"
* tag 'net-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5e: Don't call cleanup on profile rollback failure
net/mlx5: Unregister notifier on eswitch init failure
net/mlx5: Fix command bitmask initialization
net/mlx5: Check for invalid vector index on EQ creation
net/mlx5: HWS, use lock classes for bwc locks
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
net/mlx5: HWS, fixed double free in error flow of definer layout
net/mlx5: HWS, removed wrong access to a number of rules variable
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
net: dsa: vsc73xx: fix reception from VLAN-unaware bridges
net: ravb: Only advertise Rx/Tx timestamps if hardware supports it
net: microchip: vcap api: Fix memory leaks in vcap_api_encode_rule_test()
net: phy: mdio-bcm-unimac: Add BCM6846 support
dt-bindings: net: brcm,unimac-mdio: Add bcm6846-mdio
udp: Compute L4 checksum as usual when not segmenting the skb
genetlink: hold RCU in genlmsg_mcast()
net: dsa: mv88e6xxx: Fix the max_vid definition for the MV88E6361
tcp/dccp: Don't use timer_pending() in reqsk_queue_unlink().
...
|
||
Sean Anderson
|
78b2770c93 |
dma-mapping: fix tracing dma_alloc/free with vmalloc'd memory
Not all virtual addresses have physical addresses, such as if they were
vmalloc'd. Just trace the virtual address instead of trying to trace a
physical address. This aligns with the API, and is good enough to
associate dma_alloc with dma_free.
Fixes:
|
||
Lorenzo Stoakes
|
e993457df6 |
maple_tree: add regression test for spanning store bug
Add a regression test to assert that, when performing a spanning store which consumes the entirety of the rightmost right leaf node does not result in maple tree corruption when doing so. This achieves this by building a test tree of 3 levels and establishing a store which ultimately results in a spanned store of this nature. Link: https://lkml.kernel.org/r/30cdc101a700d16e03ba2f9aa5d83f2efa894168.1728314403.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: Bert Karwatzki <spasswolf@web.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
bea07fd631 |
maple_tree: correct tree corruption on spanning store
Patch series "maple_tree: correct tree corruption on spanning store", v3. There has been a nasty yet subtle maple tree corruption bug that appears to have been in existence since the inception of the algorithm. This bug seems far more likely to happen since commit |
||
Andrea Parri
|
e59db0623f |
riscv, bpf: Make BPF_CMPXCHG fully ordered
According to the prototype formal BPF memory consistency model
discussed e.g. in [1] and following the ordering properties of
the C/in-kernel macro atomic_cmpxchg(), a BPF atomic operation
with the BPF_CMPXCHG modifier is fully ordered. However, the
current RISC-V JIT lowerings fail to meet such memory ordering
property. This is illustrated by the following litmus test:
BPF BPF__MP+success_cmpxchg+fence
{
0:r1=x; 0:r3=y; 0:r5=1;
1:r2=y; 1:r4=f; 1:r7=x;
}
P0 | P1 ;
*(u64 *)(r1 + 0) = 1 | r1 = *(u64 *)(r2 + 0) ;
r2 = cmpxchg_64 (r3 + 0, r4, r5) | r3 = atomic_fetch_add((u64 *)(r4 + 0), r5) ;
| r6 = *(u64 *)(r7 + 0) ;
exists (1:r1=1 /\ 1:r6=0)
whose "exists" clause is not satisfiable according to the BPF
memory model. Using the current RISC-V JIT lowerings, the test
can be mapped to the following RISC-V litmus test:
RISCV RISCV__MP+success_cmpxchg+fence
{
0:x1=x; 0:x3=y; 0:x5=1;
1:x2=y; 1:x4=f; 1:x7=x;
}
P0 | P1 ;
sd x5, 0(x1) | ld x1, 0(x2) ;
L00: | amoadd.d.aqrl x3, x5, 0(x4) ;
lr.d x2, 0(x3) | ld x6, 0(x7) ;
bne x2, x4, L01 | ;
sc.d x6, x5, 0(x3) | ;
bne x6, x4, L00 | ;
fence rw, rw | ;
L01: | ;
exists (1:x1=1 /\ 1:x6=0)
where the two stores in P0 can be reordered. Update the RISC-V
JIT lowerings/implementation of BPF_CMPXCHG to emit an SC with
RELEASE ("rl") annotation in order to meet the expected memory
ordering guarantees. The resulting RISC-V JIT lowerings of
BPF_CMPXCHG match the RISC-V lowerings of the C atomic_cmpxchg().
Other lowerings were fixed via
|
||
Jens Axboe
|
8f7033aa40 |
io_uring/sqpoll: ensure task state is TASK_RUNNING when running task_work
When the sqpoll is exiting and cancels pending work items, it may need
to run task_work. If this happens from within io_uring_cancel_generic(),
then it may be under waiting for the io_uring_task waitqueue. This
results in the below splat from the scheduler, as the ring mutex may be
attempted grabbed while in a TASK_INTERRUPTIBLE state.
Ensure that the task state is set appropriately for that, just like what
is done for the other cases in io_run_task_work().
do not call blocking ops when !TASK_RUNNING; state=1 set at [<0000000029387fd2>] prepare_to_wait+0x88/0x2fc
WARNING: CPU: 6 PID: 59939 at kernel/sched/core.c:8561 __might_sleep+0xf4/0x140
Modules linked in:
CPU: 6 UID: 0 PID: 59939 Comm: iou-sqp-59938 Not tainted 6.12.0-rc3-00113-g8d020023b155 #7456
Hardware name: linux,dummy-virt (DT)
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __might_sleep+0xf4/0x140
lr : __might_sleep+0xf4/0x140
sp : ffff80008c5e7830
x29: ffff80008c5e7830 x28: ffff0000d93088c0 x27: ffff60001c2d7230
x26: dfff800000000000 x25: ffff0000e16b9180 x24: ffff80008c5e7a50
x23: 1ffff000118bcf4a x22: ffff0000e16b9180 x21: ffff0000e16b9180
x20: 000000000000011b x19: ffff80008310fac0 x18: 1ffff000118bcd90
x17: 30303c5b20746120 x16: 74657320313d6574 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: ffff600036c64f0b
x11: 1fffe00036c64f0a x10: ffff600036c64f0a x9 : dfff800000000000
x8 : 00009fffc939b0f6 x7 : ffff0001b6327853 x6 : 0000000000000001
x5 : ffff0001b6327850 x4 : ffff600036c64f0b x3 : ffff8000803c35bc
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000e16b9180
Call trace:
__might_sleep+0xf4/0x140
mutex_lock+0x84/0x124
io_handle_tw_list+0xf4/0x260
tctx_task_work_run+0x94/0x340
io_run_task_work+0x1ec/0x3c0
io_uring_cancel_generic+0x364/0x524
io_sq_thread+0x820/0x124c
ret_from_fork+0x10/0x20
Cc: stable@vger.kernel.org
Fixes:
|
||
Daniele Palmas
|
6d951576ee |
USB: serial: option: add Telit FN920C04 MBIM compositions
Add the following Telit FN920C04 compositions: 0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a7 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10aa Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
Benjamin B. Frost
|
540eff5d7f |
USB: serial: option: add support for Quectel EG916Q-GL
Add Quectel EM916Q-GL with product ID 0x6007 T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6007 Rev= 2.00 S: Manufacturer=Quectel S: Product=EG916Q-GL C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms MI_00 Quectel USB Diag Port MI_01 Quectel USB NMEA Port MI_02 Quectel USB AT Port MI_03 Quectel USB Modem Port MI_04 Quectel USB Net Port Signed-off-by: Benjamin B. Frost <benjamin@geanix.com> Reviewed-by: Lars Melin <larsm17@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> |
||
Michal Luczaj
|
19039f2797 |
bpf, vsock: Drop static vsock_bpf_prot initialization
vsock_bpf_prot is set up at runtime. Remove the superfluous init.
No functional change intended.
Fixes:
|
||
|
Michal Luczaj
|
6dafde852d |
vsock: Update msg_count on read_skb()
Dequeuing via vsock_transport::read_skb() left msg_count outdated, which
then confused SOCK_SEQPACKET recv(). Decrease the counter.
Fixes:
|
||
|
Michal Luczaj
|
3543152f2d |
vsock: Update rx_bytes on read_skb()
Make sure virtio_transport_inc_rx_pkt() and virtio_transport_dec_rx_pkt()
calls are balanced (i.e. virtio_vsock_sock::rx_bytes doesn't lie) after
vsock_transport::read_skb().
While here, also inform the peer that we've freed up space and it has more
credit.
Failing to update rx_bytes after packet is dequeued leads to a warning on
SOCK_STREAM recv():
[ 233.396654] rx_queue is empty, but rx_bytes is non-zero
[ 233.396702] WARNING: CPU: 11 PID: 40601 at net/vmw_vsock/virtio_transport_common.c:589
Fixes:
|
||
|
Michal Luczaj
|
9c5bd93edf |
bpf, sockmap: SK_DROP on attempted redirects of unsupported af_vsock
Don't mislead the callers of bpf_{sk,msg}_redirect_{map,hash}(): make sure
to immediately and visibly fail the forwarding of unsupported af_vsock
packets.
Fixes:
|
||
Paolo Abeni
|
cb560795c8 |
Merge branch 'mlx5-misc-fixes-2024-10-15'
Tariq Toukan says:
====================
mlx5 misc fixes 2024-10-15
This patchset provides misc bug fixes from the team to the mlx5 core and
Eth drivers.
Series generated against:
commit
|
||
Cosmin Ratiu
|
4dbc1d1a9f |
net/mlx5e: Don't call cleanup on profile rollback failure
When profile rollback fails in mlx5e_netdev_change_profile, the netdev
profile var is left set to NULL. Avoid a crash when unloading the driver
by not calling profile->cleanup in such a case.
This was encountered while testing, with the original trigger that
the wq rescuer thread creation got interrupted (presumably due to
Ctrl+C-ing modprobe), which gets converted to ENOMEM (-12) by
mlx5e_priv_init, the profile rollback also fails for the same reason
(signal still active) so the profile is left as NULL, leading to a crash
later in _mlx5e_remove.
[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)
[ 734.525513] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12
[ 734.560153] workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12
[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008
[ 745.538222] #PF: supervisor read access in kernel mode
<snipped>
[ 745.551290] Call Trace:
[ 745.551590] <TASK>
[ 745.551866] ? __die+0x20/0x60
[ 745.552218] ? page_fault_oops+0x150/0x400
[ 745.555307] ? exc_page_fault+0x79/0x240
[ 745.555729] ? asm_exc_page_fault+0x22/0x30
[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]
[ 745.556698] auxiliary_bus_remove+0x18/0x30
[ 745.557134] device_release_driver_internal+0x1df/0x240
[ 745.557654] bus_remove_device+0xd7/0x140
[ 745.558075] device_del+0x15b/0x3c0
[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]
[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]
[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]
[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]
[ 745.560694] pci_device_remove+0x39/0xa0
[ 745.561112] device_release_driver_internal+0x1df/0x240
[ 745.561631] driver_detach+0x47/0x90
[ 745.562022] bus_remove_driver+0x84/0x100
[ 745.562444] pci_unregister_driver+0x3b/0x90
[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]
[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0
[ 745.563886] ? kmem_cache_free+0x1b0/0x460
[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190
[ 745.564825] do_syscall_64+0x6d/0x140
[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 745.565725] RIP: 0033:0x7f1579b1288b
Fixes:
|
||
|
Cosmin Ratiu
|
1da9cfd6c4 |
net/mlx5: Unregister notifier on eswitch init failure
It otherwise remains registered and a subsequent attempt at eswitch
enabling might trigger warnings of the sort:
[ 682.589148] ------------[ cut here ]------------
[ 682.590204] notifier callback eswitch_vport_event [mlx5_core] already registered
[ 682.590256] WARNING: CPU: 13 PID: 2660 at kernel/notifier.c:31 notifier_chain_register+0x3e/0x90
[...snipped]
[ 682.610052] Call Trace:
[ 682.610369] <TASK>
[ 682.610663] ? __warn+0x7c/0x110
[ 682.611050] ? notifier_chain_register+0x3e/0x90
[ 682.611556] ? report_bug+0x148/0x170
[ 682.611977] ? handle_bug+0x36/0x70
[ 682.612384] ? exc_invalid_op+0x13/0x60
[ 682.612817] ? asm_exc_invalid_op+0x16/0x20
[ 682.613284] ? notifier_chain_register+0x3e/0x90
[ 682.613789] atomic_notifier_chain_register+0x25/0x40
[ 682.614322] mlx5_eswitch_enable_locked+0x1d4/0x3b0 [mlx5_core]
[ 682.614965] mlx5_eswitch_enable+0xc9/0x100 [mlx5_core]
[ 682.615551] mlx5_device_enable_sriov+0x25/0x340 [mlx5_core]
[ 682.616170] mlx5_core_sriov_configure+0x50/0x170 [mlx5_core]
[ 682.616789] sriov_numvfs_store+0xb0/0x1b0
[ 682.617248] kernfs_fop_write_iter+0x117/0x1a0
[ 682.617734] vfs_write+0x231/0x3f0
[ 682.618138] ksys_write+0x63/0xe0
[ 682.618536] do_syscall_64+0x4c/0x100
[ 682.618958] entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes:
|
||
Shay Drory
|
d62b14045c |
net/mlx5: Fix command bitmask initialization
Command bitmask have a dedicated bit for MANAGE_PAGES command, this bit
isn't Initialize during command bitmask Initialization, only during
MANAGE_PAGES.
In addition, mlx5_cmd_trigger_completions() is trying to trigger
completion for MANAGE_PAGES command as well.
Hence, in case health error occurred before any MANAGE_PAGES command
have been invoke (for example, during mlx5_enable_hca()),
mlx5_cmd_trigger_completions() will try to trigger completion for
MANAGE_PAGES command, which will result in null-ptr-deref error.[1]
Fix it by Initialize command bitmask correctly.
While at it, re-write the code for better understanding.
[1]
BUG: KASAN: null-ptr-deref in mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
Write of size 4 at addr 0000000000000214 by task kworker/u96:2/12078
CPU: 10 PID: 12078 Comm: kworker/u96:2 Not tainted 6.9.0-rc2_for_upstream_debug_2024_04_07_19_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_health0000:08:00.0 mlx5_fw_fatal_reporter_err_work [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x7e/0xc0
kasan_report+0xb9/0xf0
kasan_check_range+0xec/0x190
mlx5_cmd_trigger_completions+0x1db/0x600 [mlx5_core]
mlx5_cmd_flush+0x94/0x240 [mlx5_core]
enter_error_state+0x6c/0xd0 [mlx5_core]
mlx5_fw_fatal_reporter_err_work+0xf3/0x480 [mlx5_core]
process_one_work+0x787/0x1490
? lockdep_hardirqs_on_prepare+0x400/0x400
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x586/0xd30
? rescuer_thread+0xae0/0xae0
kthread+0x2df/0x3b0
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x2d/0x70
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes:
|
||
Maher Sanalla
|
d4f25be27e |
net/mlx5: Check for invalid vector index on EQ creation
Currently, mlx5 driver does not enforce vector index to be lower than
the maximum number of supported completion vectors when requesting a
new completion EQ. Thus, mlx5_comp_eqn_get() fails when trying to
acquire an IRQ with an improper vector index.
To prevent the case above, enforce that vector index value is
valid and lower than maximum in mlx5_comp_eqn_get() before handling the
request.
Fixes:
|
||
|
Cosmin Ratiu
|
9addffa343 |
net/mlx5: HWS, use lock classes for bwc locks
The HWS BWC API uses one lock per queue and usually acquires one of
them, except when doing changes which require locking all queues in
order. Naturally, lockdep isn't too happy about acquiring the same lock
class multiple times, so inform it that each queue lock is a different
class to avoid false positives.
Fixes:
|
||
|
Cosmin Ratiu
|
45bcbd4922 |
net/mlx5: HWS, don't destroy more bwc queue locks than allocated
hws_send_queues_bwc_locks_destroy destroyed more queue locks than
allocated, leading to memory corruption (occasionally) and warnings such
as DEBUG_LOCKS_WARN_ON(mutex_is_locked(lock)) in __mutex_destroy because
sometimes, the 'mutex' being destroyed was random memory.
The severity of this problem is proportional to the number of queues
configured because the code overreaches beyond the end of the
bwc_send_queue_locks array by 2x its length.
Fix that by using the correct number of bwc queues.
Fixes:
|
||
Yevgeny Kliteynik
|
5aa2184e29 |
net/mlx5: HWS, fixed double free in error flow of definer layout
Fix error flow bug that could lead to double free of a buffer
during a failure to calculate a suitable definer layout.
Fixes:
|
||
|
Yevgeny Kliteynik
|
65b4eb9f3d |
net/mlx5: HWS, removed wrong access to a number of rules variable
Removed wrong access to the num_of_rules field of the matcher.
This is a usual u32 variable, but the access was as if it was atomic.
This fixes the following CI warnings:
mlx5hws_bwc.c:708:17: warning: large atomic operation may incur significant performance penalty;
the access size (4 bytes) exceeds the max lock-free size (0 bytes) [-Watomic-alignment]
Fixes:
|
||
Matthieu Baerts (NGI0)
|
7decd1f590 |
mptcp: pm: fix UaF read in mptcp_pm_nl_rm_addr_or_subflow
Syzkaller reported this splat:
==================================================================
BUG: KASAN: slab-use-after-free in mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
Read of size 4 at addr ffff8880569ac858 by task syz.1.2799/14662
CPU: 0 UID: 0 PID: 14662 Comm: syz.1.2799 Not tainted 6.12.0-rc2-syzkaller-00307-g36c254515dc6 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
mptcp_pm_nl_rm_addr_or_subflow+0xb44/0xcc0 net/mptcp/pm_netlink.c:881
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg net/socket.c:744 [inline]
____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
__sys_sendmsg+0x117/0x1f0 net/socket.c:2690
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf7fe4579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f574556c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 000000000000000b RCX: 0000000020000140
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 5387:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:394
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
subflow_create_ctx+0x87/0x2a0 net/mptcp/subflow.c:1803
subflow_ulp_init+0xc3/0x4d0 net/mptcp/subflow.c:1956
__tcp_set_ulp net/ipv4/tcp_ulp.c:146 [inline]
tcp_set_ulp+0x326/0x7f0 net/ipv4/tcp_ulp.c:167
mptcp_subflow_create_socket+0x4ae/0x10a0 net/mptcp/subflow.c:1764
__mptcp_subflow_connect+0x3cc/0x1490 net/mptcp/subflow.c:1592
mptcp_pm_create_subflow_or_signal_addr+0xbda/0x23a0 net/mptcp/pm_netlink.c:642
mptcp_pm_nl_fully_established net/mptcp/pm_netlink.c:650 [inline]
mptcp_pm_nl_work+0x3a1/0x4f0 net/mptcp/pm_netlink.c:943
mptcp_worker+0x15a/0x1240 net/mptcp/protocol.c:2777
process_one_work+0x958/0x1b30 kernel/workqueue.c:3229
process_scheduled_works kernel/workqueue.c:3310 [inline]
worker_thread+0x6c8/0xf00 kernel/workqueue.c:3391
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Freed by task 113:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
poison_slab_object mm/kasan/common.c:247 [inline]
__kasan_slab_free+0x51/0x70 mm/kasan/common.c:264
kasan_slab_free include/linux/kasan.h:230 [inline]
slab_free_hook mm/slub.c:2342 [inline]
slab_free mm/slub.c:4579 [inline]
kfree+0x14f/0x4b0 mm/slub.c:4727
kvfree+0x47/0x50 mm/util.c:701
kvfree_rcu_list+0xf5/0x2c0 kernel/rcu/tree.c:3423
kvfree_rcu_drain_ready kernel/rcu/tree.c:3563 [inline]
kfree_rcu_monitor+0x503/0x8b0 kernel/rcu/tree.c:3632
kfree_rcu_shrink_scan+0x245/0x3a0 kernel/rcu/tree.c:3966
do_shrink_slab+0x44f/0x11c0 mm/shrinker.c:435
shrink_slab+0x32b/0x12a0 mm/shrinker.c:662
shrink_one+0x47e/0x7b0 mm/vmscan.c:4818
shrink_many mm/vmscan.c:4879 [inline]
lru_gen_shrink_node mm/vmscan.c:4957 [inline]
shrink_node+0x2452/0x39d0 mm/vmscan.c:5937
kswapd_shrink_node mm/vmscan.c:6765 [inline]
balance_pgdat+0xc19/0x18f0 mm/vmscan.c:6957
kswapd+0x5ea/0xbf0 mm/vmscan.c:7226
kthread+0x2c1/0x3a0 kernel/kthread.c:389
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Last potentially related work creation:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
__kasan_record_aux_stack+0xba/0xd0 mm/kasan/generic.c:541
kvfree_call_rcu+0x74/0xbe0 kernel/rcu/tree.c:3810
subflow_ulp_release+0x2ae/0x350 net/mptcp/subflow.c:2009
tcp_cleanup_ulp+0x7c/0x130 net/ipv4/tcp_ulp.c:124
tcp_v4_destroy_sock+0x1c5/0x6a0 net/ipv4/tcp_ipv4.c:2541
inet_csk_destroy_sock+0x1a3/0x440 net/ipv4/inet_connection_sock.c:1293
tcp_done+0x252/0x350 net/ipv4/tcp.c:4870
tcp_rcv_state_process+0x379b/0x4f30 net/ipv4/tcp_input.c:6933
tcp_v4_do_rcv+0x1ad/0xa90 net/ipv4/tcp_ipv4.c:1938
sk_backlog_rcv include/net/sock.h:1115 [inline]
__release_sock+0x31b/0x400 net/core/sock.c:3072
__tcp_close+0x4f3/0xff0 net/ipv4/tcp.c:3142
__mptcp_close_ssk+0x331/0x14d0 net/mptcp/protocol.c:2489
mptcp_close_ssk net/mptcp/protocol.c:2543 [inline]
mptcp_close_ssk+0x150/0x220 net/mptcp/protocol.c:2526
mptcp_pm_nl_rm_addr_or_subflow+0x2be/0xcc0 net/mptcp/pm_netlink.c:878
mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:914 [inline]
mptcp_nl_remove_id_zero_address+0x305/0x4a0 net/mptcp/pm_netlink.c:1572
mptcp_pm_nl_del_addr_doit+0x5c9/0x770 net/mptcp/pm_netlink.c:1603
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x165/0x410 net/netlink/af_netlink.c:2551
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1357
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1901
sock_sendmsg_nosec net/socket.c:729 [inline]
__sock_sendmsg net/socket.c:744 [inline]
____sys_sendmsg+0x9ae/0xb40 net/socket.c:2607
___sys_sendmsg+0x135/0x1e0 net/socket.c:2661
__sys_sendmsg+0x117/0x1f0 net/socket.c:2690
do_syscall_32_irqs_on arch/x86/entry/common.c:165 [inline]
__do_fast_syscall_32+0x73/0x120 arch/x86/entry/common.c:386
do_fast_syscall_32+0x32/0x80 arch/x86/entry/common.c:411
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
The buggy address belongs to the object at ffff8880569ac800
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 88 bytes inside of
freed 512-byte region [ffff8880569ac800, ffff8880569aca00)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x569ac
head: order:2 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x4fff00000000040(head|node=1|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122
raw: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000
head: 04fff00000000040 ffff88801ac42c80 dead000000000100 dead000000000122
head: 0000000000000000 0000000080100010 00000001f5000000 0000000000000000
head: 04fff00000000002 ffffea00015a6b01 ffffffffffffffff 0000000000000000
head: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 10238, tgid 10238 (kworker/u32:6), ts 597403252405, free_ts 597177952947
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x2d1/0x350 mm/page_alloc.c:1537
prep_new_page mm/page_alloc.c:1545 [inline]
get_page_from_freelist+0x101e/0x3070 mm/page_alloc.c:3457
__alloc_pages_noprof+0x223/0x25a0 mm/page_alloc.c:4733
alloc_pages_mpol_noprof+0x2c9/0x610 mm/mempolicy.c:2265
alloc_slab_page mm/slub.c:2412 [inline]
allocate_slab mm/slub.c:2578 [inline]
new_slab+0x2ba/0x3f0 mm/slub.c:2631
___slab_alloc+0xd1d/0x16f0 mm/slub.c:3818
__slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908
__slab_alloc_node mm/slub.c:3961 [inline]
slab_alloc_node mm/slub.c:4122 [inline]
__kmalloc_cache_noprof+0x2c5/0x310 mm/slub.c:4290
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
mld_add_delrec net/ipv6/mcast.c:743 [inline]
igmp6_leave_group net/ipv6/mcast.c:2625 [inline]
igmp6_group_dropped+0x4ab/0xe40 net/ipv6/mcast.c:723
__ipv6_dev_mc_dec+0x281/0x360 net/ipv6/mcast.c:979
addrconf_leave_solict net/ipv6/addrconf.c:2253 [inline]
__ipv6_ifa_notify+0x3f6/0xc30 net/ipv6/addrconf.c:6283
addrconf_ifdown.isra.0+0xef9/0x1a20 net/ipv6/addrconf.c:3982
addrconf_notify+0x220/0x19c0 net/ipv6/addrconf.c:3781
notifier_call_chain+0xb9/0x410 kernel/notifier.c:93
call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:1996
call_netdevice_notifiers_extack net/core/dev.c:2034 [inline]
call_netdevice_notifiers net/core/dev.c:2048 [inline]
dev_close_many+0x333/0x6a0 net/core/dev.c:1589
page last free pid 13136 tgid 13136 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1108 [inline]
free_unref_page+0x5f4/0xdc0 mm/page_alloc.c:2638
stack_depot_save_flags+0x2da/0x900 lib/stackdepot.c:666
kasan_save_stack+0x42/0x60 mm/kasan/common.c:48
kasan_save_track+0x14/0x30 mm/kasan/common.c:68
unpoison_slab_object mm/kasan/common.c:319 [inline]
__kasan_slab_alloc+0x89/0x90 mm/kasan/common.c:345
kasan_slab_alloc include/linux/kasan.h:247 [inline]
slab_post_alloc_hook mm/slub.c:4085 [inline]
slab_alloc_node mm/slub.c:4134 [inline]
kmem_cache_alloc_noprof+0x121/0x2f0 mm/slub.c:4141
skb_clone+0x190/0x3f0 net/core/skbuff.c:2084
do_one_broadcast net/netlink/af_netlink.c:1462 [inline]
netlink_broadcast_filtered+0xb11/0xef0 net/netlink/af_netlink.c:1540
netlink_broadcast+0x39/0x50 net/netlink/af_netlink.c:1564
uevent_net_broadcast_untagged lib/kobject_uevent.c:331 [inline]
kobject_uevent_net_broadcast lib/kobject_uevent.c:410 [inline]
kobject_uevent_env+0xacd/0x1670 lib/kobject_uevent.c:608
device_del+0x623/0x9f0 drivers/base/core.c:3882
snd_card_disconnect.part.0+0x58a/0x7c0 sound/core/init.c:546
snd_card_disconnect+0x1f/0x30 sound/core/init.c:495
snd_usx2y_disconnect+0xe9/0x1f0 sound/usb/usx2y/usbusx2y.c:417
usb_unbind_interface+0x1e8/0x970 drivers/usb/core/driver.c:461
device_remove drivers/base/dd.c:569 [inline]
device_remove+0x122/0x170 drivers/base/dd.c:561
That's because 'subflow' is used just after 'mptcp_close_ssk(subflow)',
which will initiate the release of its memory. Even if it is very likely
the release and the re-utilisation will be done later on, it is of
course better to avoid any issues and read the content of 'subflow'
before closing it.
Fixes:
|
||
Felix Fietkau
|
88806efc03 |
net: ethernet: mtk_eth_soc: fix memory corruption during fq dma init
The loop responsible for allocating up to MTK_FQ_DMA_LENGTH buffers must
only touch as many descriptors, otherwise it ends up corrupting unrelated
memory. Fix the loop iteration count accordingly.
Fixes:
|
||
|
Daniel Borkmann
|
4678adf94d |
vmxnet3: Fix packet corruption in vmxnet3_xdp_xmit_frame
Andrew and Nikolay reported connectivity issues with Cilium's service
load-balancing in case of vmxnet3.
If a BPF program for native XDP adds an encapsulation header such as
IPIP and transmits the packet out the same interface, then in case
of vmxnet3 a corrupted packet is being sent and subsequently dropped
on the path.
vmxnet3_xdp_xmit_frame() which is called e.g. via vmxnet3_run_xdp()
through vmxnet3_xdp_xmit_back() calculates an incorrect DMA address:
page = virt_to_page(xdpf->data);
tbi->dma_addr = page_pool_get_dma_addr(page) +
VMXNET3_XDP_HEADROOM;
dma_sync_single_for_device(&adapter->pdev->dev,
tbi->dma_addr, buf_size,
DMA_TO_DEVICE);
The above assumes a fixed offset (VMXNET3_XDP_HEADROOM), but the XDP
BPF program could have moved xdp->data. While the passed buf_size is
correct (xdpf->len), the dma_addr needs to have a dynamic offset which
can be calculated as xdpf->data - (void *)xdpf, that is, xdp->data -
xdp->data_hard_start.
Fixes:
|
||
Ingo Molnar
|
be602cde65 |
Merge branch 'linus' into sched/urgent, to resolve conflict
Conflicts: kernel/sched/ext.c There's a context conflict between this upstream commit: |
||
Dave Airlie
|
4cd33d972e |
Merge tag 'drm-msm-fixes-2024-10-16' of https://gitlab.freedesktop.org/drm/msm into drm-fixes
Fixes for v6.12 Display: - move CRTC resource assignment to atomic_check otherwise to make consecutive calls to atomic_check() consistent - fix rounding / sign-extension issues with pclk calculation in case of DSC - cleanups to drop incorrect null checks in dpu snapshots - fix to use kvzalloc in dpu snapshot to avoid allocation issues in heavily loaded system cases - Fix to not program merge_3d block if dual LM is not being used - Fix to not flush merge_3d block if its not enabled otherwise this leads to false timeouts GPU: - a7xx: add a fence wait before SMMU table update Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsp3Zbd_H3FhHdRz9yCYA4wxX4SenpYRSk=Mx2d8GMSuQ@mail.gmail.com |
||
Wei Xu
|
b130ba4a62 |
mm/mglru: only clear kswapd_failures if reclaimable
lru_gen_shrink_node() unconditionally clears kswapd_failures, which can
prevent kswapd from sleeping and cause 100% kswapd cpu usage even when
kswapd repeatedly fails to make progress in reclaim.
Only clear kswap_failures in lru_gen_shrink_node() if reclaim makes some
progress, similar to shrink_node().
I happened to run into this problem in one of my tests recently. It
requires a combination of several conditions: The allocator needs to
allocate a right amount of pages such that it can wake up kswapd
without itself being OOM killed; there is no memory for kswapd to
reclaim (My test disables swap and cleans page cache first); no other
process frees enough memory at the same time.
Link: https://lkml.kernel.org/r/20241014221211.832591-1-weixugc@google.com
Fixes:
|
||
Liu Shixin
|
7528c4fb12 |
mm/swapfile: skip HugeTLB pages for unuse_vma
I got a bad pud error and lost a 1GB HugeTLB when calling swapoff. The
problem can be reproduced by the following steps:
1. Allocate an anonymous 1GB HugeTLB and some other anonymous memory.
2. Swapout the above anonymous memory.
3. run swapoff and we will get a bad pud error in kernel message:
mm/pgtable-generic.c:42: bad pud 00000000743d215d(84000001400000e7)
We can tell that pud_clear_bad is called by pud_none_or_clear_bad in
unuse_pud_range() by ftrace. And therefore the HugeTLB pages will never
be freed because we lost it from page table. We can skip HugeTLB pages
for unuse_vma to fix it.
Link: https://lkml.kernel.org/r/20241015014521.570237-1-liushixin2@huawei.com
Fixes:
|
||
Nanyong Sun
|
3e822bed2f |
selftests: mm: fix the incorrect usage() info of khugepaged
The mount option of tmpfs should be huge=advise, not madvise which is not
supported and may mislead the users.
Link: https://lkml.kernel.org/r/20241015020257.139235-1-sunnanyong@huawei.com
Fixes:
|
||
Jann Horn
|
cb2bb9c564 |
MAINTAINERS: add Jann as memory mapping/VMA reviewer
Add myself as a reviewer for memory mapping / VMA code. I will probably only reply to patches sporadically, but hopefully this will help me keep up with changes that look interesting security-wise. Link: https://lkml.kernel.org/r/20241014-maintainers-mmap-reviewer-v1-1-50dce0514752@google.com Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com> Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
Jeongjun Park
|
818f916e3a |
mm: swap: prevent possible data-race in __try_to_reclaim_swap
A report [1] was uploaded from syzbot. In the previous commit |
||
Baolin Wang
|
d60fcaf00d |
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
Khugepaged already supports collapsing file large folios (including shmem mTHP) by commit |
||
Andrey Konovalov
|
22ff9b0ff1 |
MAINTAINERS: kasan, kcov: add bugzilla links
Add links to the Bugzilla component that's used to track KASAN and KCOV issues. Link: https://lkml.kernel.org/r/20241012225524.117871-1-andrey.konovalov@linux.dev Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
David Hildenbrand
|
2b0f922323 |
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
We (or rather, readahead logic :) ) might be allocating a THP in the
pagecache and then try mapping it into a process that explicitly disabled
THP: we might end up installing PMD mappings.
This is a problem for s390x KVM, which explicitly remaps all PMD-mapped
THPs to be PTE-mapped in s390_enable_sie()->thp_split_mm(), before
starting the VM.
For example, starting a VM backed on a file system with large folios
supported makes the VM crash when the VM tries accessing such a mapping
using KVM.
Is it also a problem when the HW disabled THP using
TRANSPARENT_HUGEPAGE_UNSUPPORTED? At least on x86 this would be the case
without X86_FEATURE_PSE.
In the future, we might be able to do better on s390x and only disallow
PMD mappings -- what s390x and likely TRANSPARENT_HUGEPAGE_UNSUPPORTED
really wants. For now, fix it by essentially performing the same check as
would be done in __thp_vma_allowable_orders() or in shmem code, where this
works as expected, and disallow PMD mappings, making us fallback to PTE
mappings.
Link: https://lkml.kernel.org/r/20241011102445.934409-3-david@redhat.com
Fixes:
|
||
Kefeng Wang
|
963756aac1 |
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Patch series "mm: don't install PMD mappings when THPs are disabled by the
hw/process/vma".
During testing, it was found that we can get PMD mappings in processes
where THP (and more precisely, PMD mappings) are supposed to be disabled.
While it works as expected for anon+shmem, the pagecache is the
problematic bit.
For s390 KVM this currently means that a VM backed by a file located on
filesystem with large folio support can crash when KVM tries accessing the
problematic page, because the readahead logic might decide to use a
PMD-sized THP and faulting it into the page tables will install a PMD
mapping, something that s390 KVM cannot tolerate.
This might also be a problem with HW that does not support PMD mappings,
but I did not try reproducing it.
Fix it by respecting the ways to disable THPs when deciding whether we can
install a PMD mapping. khugepaged should already be taking care of not
collapsing if THPs are effectively disabled for the hw/process/vma.
This patch (of 2):
Add vma_thp_disabled() and thp_disabled_by_hw() helpers to be shared by
shmem_allowable_huge_orders() and __thp_vma_allowable_orders().
[david@redhat.com: rename to vma_thp_disabled(), split out thp_disabled_by_hw() ]
Link: https://lkml.kernel.org/r/20241011102445.934409-2-david@redhat.com
Fixes:
|
||
SeongJae Park
|
f4050ccab7 |
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
DAMON GitHub repos have moved from awslabs GitHub org to damonitor org[1]. Following the change, URLs on documents are also updated[2]. However, commit |
||
|
SeongJae Park
|
46e10f644a |
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
Patch series "Docs/damon/maintainer-profile: a couple of minor hotfixes".
DAMON maintainer-profile.rst file patches[1] that were merged into the
v6.12-rc1 have a couple of minor mistakes. Fix those.
[1] https://lore.kernel.org/20240826015741.80707-1-sj@kernel.org
This patch (of 2):
Links to external web pages on DAMON's maintainer-profile.rst are missing
'_' suffixes. As a result, rendered document is having only verbose URLs
that cannot be clicked. Fix those.
Also, update the link texts for git trees to contain the names of the
trees, for better readability and avoiding below Sphinx warning.
maintainer-profile.rst:4: WARNING: Duplicate explicit target name: "tree".
Link: https://lkml.kernel.org/r/20241011170154.70651-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20241011170154.70651-2-sj@kernel.org
Fixes:
|
||
Sidhartha Kumar
|
a6e0ceb7bf |
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
It is possible for a bulk operation (MA_STATE_BULK is set) to enter the
new_end < mt_min_slots[type] case and set wr_rebalance as a store type.
This is incorrect as bulk stores do not rebalance per write, but rather
after the all of the writes are done through the mas_bulk_rebalance()
path. Therefore, add a check to make sure MA_STATE_BULK is not set before
we return wr_rebalance as the store type.
Also add a test to make sure wr_rebalance is never the store type when
doing bulk operations via mas_expected_entries()
This is a hotfix for this rc however it has no userspace effects as there
are no users of the bulk insertion mode.
Link: https://lkml.kernel.org/r/20241011214451.7286-1-sidhartha.kumar@oracle.com
Fixes:
|
||
Yang Shi
|
37f0b47c51 |
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
The "addr" and "is_shmem" arguments have different order in TP_PROTO and
TP_ARGS. This resulted in the incorrect trace result:
text-hugepage-644429 [276] 392092.878683: mm_khugepaged_collapse_file:
mm=0xffff20025d52c440, hpage_pfn=0x200678c00, index=512, addr=1, is_shmem=0,
filename=text-hugepage, nr=512, result=failed
The value of "addr" is wrong because it was treated as bool value, the
type of is_shmem.
Fix the order in TP_PROTO to keep "addr" is before "is_shmem" since the
original patch review suggested this order to achieve best packing.
And use "lx" for "addr" instead of "ld" in TP_printk because address is
typically shown in hex.
After the fix, the trace result looks correct:
text-hugepage-7291 [004] 128.627251: mm_khugepaged_collapse_file:
mm=0xffff0001328f9500, hpage_pfn=0x20016ea00, index=512, addr=0x400000,
is_shmem=0, filename=text-hugepage, nr=512, result=failed
Link: https://lkml.kernel.org/r/20241012011702.1084846-1-yang@os.amperecomputing.com
Fixes:
|
||
Jinjie Ruan
|
2d6a1c8356 |
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
The sysfs_target->regions allocated in damon_sysfs_regions_alloc() is not
freed in damon_sysfs_test_add_targets(), which cause the following memory
leak, free it to fix it.
unreferenced object 0xffffff80c2a8db80 (size 96):
comm "kunit_try_catch", pid 187, jiffies 4294894363
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<0000000001e3714d>] kmemleak_alloc+0x34/0x40
[<000000008e6835c1>] __kmalloc_cache_noprof+0x26c/0x2f4
[<000000001286d9f8>] damon_sysfs_test_add_targets+0x1cc/0x738
[<0000000032ef8f77>] kunit_try_run_case+0x13c/0x3ac
[<00000000f3edea23>] kunit_generic_run_threadfn_adapter+0x80/0xec
[<00000000adf936cf>] kthread+0x2e8/0x374
[<0000000041bb1628>] ret_from_fork+0x10/0x20
Link: https://lkml.kernel.org/r/20241010125323.3127187-1-ruanjinjie@huawei.com
Fixes:
|
||
Andy Shevchenko
|
a5e8eb2513 |
mm: remove unused stub for can_swapin_thp()
When can_swapin_thp() is unused, it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y: mm/memory.c:4184:20: error: unused function 'can_swapin_thp' [-Werror,-Wunused-function] Fix this by removing the unused stub. See also commit |