[what]
currently driver recover vram after full access, which may hit
a corner case that meanwhile another whole gpu reset may be
triggered by another VF, which will cause vram recover fail
then fail the whole device reset.
[how]
move the recover vram into full access. So another bad VF will
not disturb the recover sequence for this vf.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed by: Monk.Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use other APIs which are with the same functionality but much
more clean.
V2: drop mediate unneeded interface
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Also drop unnecessary header file and declarations.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to have special handlings for swSMU supported ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gcc warns about an sprintf() that uses the same buffer as source
and destination, which is undefined behavior in C99:
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c: In function 'amdgpu_securedisplay_debugfs_write':
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c:141:6: error: 'sprintf' argument 3 overlaps destination object 'i2c_output' [-Werror=restrict]
141 | sprintf(i2c_output, "%s 0x%X", i2c_output,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
142 | securedisplay_cmd->securedisplay_out_message.send_roi_crc.i2c_buf[i]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c:97:7: note: destination object referenced by 'restrict'-qualified argument 1 was declared here
97 | char i2c_output[256];
| ^~~~~~~~~~
Rewrite it to remember the current offset into the buffer instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
clang points out that the %hu format string does not match the type
of the variables here:
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:263:7: warning: format specifies type 'unsigned short' but the argument has type 'unsigned int' [-Wformat]
version_major, version_minor);
^~~~~~~~~~~~~
include/drm/drm_print.h:498:19: note: expanded from macro 'DRM_ERROR'
__drm_err(fmt, ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
Change it to a regular %u, the same way a previous patch did for
another instance of the same warning.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_hdp.h has been included at line 91, so remove
the duplicate include.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove per_device_list from kfd_process and replace it with a
kfd_process_device pointers array of MAX_GPU_INSTANCES size. This helps
to manage the kfd_process_devices binded to a specific kfd_process.
Also, functions used by kfd_chardev to iterate over the list were
removed, since they are not valid anymore. Instead, it was replaced by a
local loop iterating the array.
Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Link index doesn't always correspond to the appropriate eDP instance.
We can assume lower link index is a lower eDP instance and set panel
control instance accordingly.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Jake Wang <haonan.wang2@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Change set_drr to pass in the entire dc_crtc_timing_adjust
structure instead of passing in the parameters individually.
This is to more easily pass in required parameters in the
adjust structure when it gets updated.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On NAVI14 CONFIG_UBSAN reported shift-out-of-bounds at
display_rq_dlg_calc_20v2.c:304:38
rq_param->misc.rq_c.blk256_height is 0 when chroma(*_c) is invalid.
dml_log2 returns -1023 for log2(0), although log2(0) is undefined.
Which ended up as:
rq_param->dlg.rq_c.swath_height = 1 << -1023
[How]
Fix applied on all dml versions.
1. Ensure dml_log2 is only called if the argument is greater than 0.
2. Subtract req128_l/req128_c from log2_swath_height_l/log2_swath_height_c
only when it is greater than 0.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Anson Jacob <Anson.Jacob@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When performing clock recovery, if a pre-emphasis adjustment is
requested, but voltage swing remains constant, the the retry counter
will not be reset. This can lead to prematurely failing link training.
[How]
Reset the clock recovery retry counter if an adjustment is requested
for either voltage swing or pre-emphasis.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Calvin Hou <Calvin.Hou@amd.com>
Signed-off-by: David Galiffi <David.Galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The amdgpu_dm IRQ handlers are not freed during the IRQ teardown.
[how]
Add function to deallocate IRQ handlers on amdgpu_dm_irq_fini step.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is causing a pstate change underflow regression for
unknown reason
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Catch invalid link_rate and link_count settings
2. Call dc interface to overwrite preferred link settings, and wait
until next stream update to apply the new settings.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We want to log DMCUB trace buffer events as Linux kernel traces.
[How]
Register an IRQ handler for DMCUB outbox0 interrupt in amdgpu_dm,
and log the messages in the DMCUB tracebuffer to a new DMCUB
TRACE_EVENT as soon as we receive the outbox0 IRQ from DMCUB FW.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some hardware revisions do have a max number of lines limitation
not honouring which can cause pstate switch underflow.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Receive warning message below:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:380: warning: Function
parameter or member 'crc_rd_wrk' not described in 'amdgpu_display_manager'
[How]
Add documentation for crc_rd_wrk.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pmfw structs are specific to the asic and should not be
present in base clk_mgr struct
v2: squash in SI fix (Alex)
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Dcn2.1 socclk entries in bandwidth params are not initialized.
They are not used now, but will be needed for dml validation.
[How]
Populate socclk bw params from dpm clock table
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Solomon Chiu <solomon.chiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To make size is 4 byte aligned. Use &~0x3ULL instead of &3ULL.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of blocking varied unsupported MP1 state in upper level,
defer and skip such MP1 state handling in specific ASIC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Skip PP_MP1_STATE_NONE in MP1 state setting, otherwise, it will
break S3 sequence.
[ 50.188269] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* SMC failed to set mp1 state 0, -22
[ 50.969901] amdgpu 0000:03:00.0: amdgpu: SMU is resuming...
[ 50.970024] sd 0:0:0:0: [sda] Starting disk
[ 50.979723] serial 00:02: activated
[ 51.353644] ata4: SATA link down (SStatus 4 SControl 300)
[ 51.353669] ata3: SATA link down (SStatus 4 SControl 300)
[ 51.353747] ata6: SATA link down (SStatus 4 SControl 300)
[ 51.357694] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 51.357711] ata5: SATA link down (SStatus 4 SControl 300)
[ 51.357729] ata2: SATA link down (SStatus 4 SControl 300)
[ 51.358005] ata1.00: supports DRM functions and may not be fully accessible
[ 51.360491] ata1.00: supports DRM functions and may not be fully accessible
[ 51.362573] ata1.00: configured for UDMA/133
[ 51.362610] ahci 0000:00:17.0: port does not support device sleep
[ 51.362946] ata1.00: Enabling discard_zeroes_data
[ 52.566438] amdgpu 0000:03:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
[ 54.126316] amdgpu 0000:03:00.0: amdgpu: Msg issuing pre-check failed and SMU may be not in the right state!
[ 54.126317] amdgpu 0000:03:00.0: amdgpu: Failed to SetDriverDramAddr!
[ 54.126318] amdgpu 0000:03:00.0: amdgpu: Failed to setup smc hw!
[ 54.126319] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <smu> failed -62
[ 54.126398] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
[ 54.126399] PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -62
[ 54.126403] PM: Device 0000:03:00.0 failed to resume async: error -62
Fixes: 1689fca0d6 ("drm/amd/pm: fix Navi1x runtime resume failure V2")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
refactor AMDGPU_PP_SENSOR_GPU_LOAD to ensure code consistency with other
commands
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix size comparison in the resource cursor.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 098214999c added fetching of the AUX_DPHY register
values from the vbios, but it also changed the default values
in the case when there are no values in the vbios. This causes
problems with displays with high refresh rates. To fix this,
switch back to the original default value for AUX_DPHY_TX_CONTROL.
Fixes: 098214999c ("drm/amd/display: Read VBIOS Golden Settings Tbl")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Igor Kravchenko <Igor.Kravchenko@amd.com>
Cc: Aric Cyr <Aric.Cyr@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Replace GFP_KERNEL with GFP_ATOMIC as dcn20_resource_construct()
can't sleep.
Partially fixes: https://bugzilla.kernel.org/show_bug.cgi?id=212311
as dcn20_resource_construct() also calls into SMU functions which does
mutex_lock().
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘bw_calcs_init’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2726:1: warning: the frame size of 1336 bytes is larger than 1024 bytes [-Wframe-larger-than=]
v2: squash in sizeof fix
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’:
drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2016:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:527:17: warning: no previous prototype for ‘dce80_aux_engine_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:565:20: warning: no previous prototype for ‘dce80_i2c_hw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:581:20: warning: no previous prototype for ‘dce80_i2c_sw_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:715:22: warning: no previous prototype for ‘dce80_link_encoder_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:754:22: warning: no previous prototype for ‘dce80_clock_source_create’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:778:6: warning: no previous prototype for ‘dce80_clock_source_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:868:6: warning: no previous prototype for ‘dce80_validate_bandwidth’ [-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/dc/dce80/dce80_resource.c:913:16: warning: no previous prototype for ‘dce80_validate_global’ [-Wmissing-prototypes]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Anthony Koo <Anthony.Koo@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RLC was put into a wrong state on runtime suspend. Thus the RLC
autoload will fail on the succeeding runtime resume. By adding an
intermediate PPSMC_MSG_PrepareMp1ForUnload(some GC hard reset involved,
designed for PnP), we can bring RLC back into the desired state.
V2: integrate INTERRUPTS_ENABLED flag clearing into current
mp1 state set routines
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable clockgating for VCN and JPEG blocks on aldebaran
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/traing/training/
...Plus the entire sentence construction for better readability.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If userptr pages have been pinned but not bounded,
they remain uncleared.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Gomez <daniel@qtec.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX is in gfxoff mode during s0ix so we shouldn't need to
actually tear anything down and restore it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We handle it properly within the CG/PG functions directly
now.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not needed as the device is in gfxoff state so the CG/PG state
is handled just like it would be for gfxoff during runtime gfxoff.
This should also prevent delays on resume.
Reworked from Pratik's original patch (Alex)
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Provide and explanation as to why we skip GFX and PSP for
S0ix. GFX goes into gfxoff, same as runtime, so no need
to tear down and re-init. PSP is part of the always on
state, so no need to touch it.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU expects CGPG to be enabled when entering S0ix.
with this we can re-enable SMU suspend.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This really needs to be done to properly tear down
the device. SMC, PSP, and GFX are still problematic,
need to dig deeper into what aspect of them that is
problematic.
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional change.
v2: use correct dev
v3: rework
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
