Here is our bunch of changes for mach-sunxi for this release cycle. This is
basically only about bringing the SMP support to the A80, which has a bug
in hardware and cannot use PSCI like the other SoCs we have.
-----BEGIN PGP SIGNATURE-----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=kUb5
-----END PGP SIGNATURE-----
Merge tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc
Pull "Allwinner core changes for 4.17" from Maxime Ripard:
Here is our bunch of changes for mach-sunxi for this release cycle. This is
basically only about bringing the SMP support to the A80, which has a bug
in hardware and cannot use PSCI like the other SoCs we have.
* tag 'sunxi-core-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: sunxi: mc-smp: Split out SoC-specific device node lookup sequence
ARM: sunxi: mc-smp: Use DT enable-method for sun9i A80 SMP
ARM: sunxi: mc-smp: Fix "lookback" typo
ARM: sun9i: smp: Support cpu0 hotplug
dt-bindings: ARM: sunxi: Document A80 SoC secure SRAM usage by SMP hotplug
ARM: sun9i: smp: Support CPU/cluster power down and hotplugging for cpu1~7
ARM: sun9i: Support SMP bring-up on A80
Enable FlexCAN support as module by default. FlexCAN can be found
on various NXP designs such as the i.MX and Vybrid SoC family.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This allows to successfully boot Colibri iMX7 which is using
the Ricoh RN5T567 PMIC.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add GPMI NAND controller support as required by some NXP i.MX6/7
based boards.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable on-chip OTP NVMEM support for NXP i.MX and VF610 SoCs.
Since OTP values might be required by drivers required during
boot, make sure the driver is built-in (e.g. i.MX thermal
driver).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PMIC often require the I2C bus, and the PMIC regulators might be
necessary to power on eMMC/SD-card or other supplies required
for successful boot. Make sure I2C driver for i.MX devices is
built-in.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series enables more devices working on droid4 to make it easier
for people and distros to use out of the box.
-----BEGIN PGP SIGNATURE-----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=sOYq
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Second set of defconfig changes for omap variants for v4.17" from Tony Lindgren:
This series enables more devices working on droid4 to make it easier
for people and distros to use out of the box.
* tag 'omap-for-v4.17/defconfig-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable CPCAP related options mostly as loadable modules
ARM: omap2plus_defconfig: Add UINPUT
ARM: omap2plus_defconfig: Enable MDM6600 USB PHY
ARM: omap2plus_defconfig: Add AUDIO_GRAPH_CARD
ARM: omap2plus_defconfig: Enable PWM_VIBRA
DRM driver rather than the old fbdev driver.
-----BEGIN PGP SIGNATURE-----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=Yh10
-----END PGP SIGNATURE-----
Merge tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc
Pull "defconfig changes for Versatile DRM" from Linus Walleij:
This augments the RealView and Versatile defconfig to use the PL111
DRM driver rather than the old fbdev driver.
* tag 'armsoc-versatile-drm-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: defconfig: Configure Versatile boards to use PL111 DRM
ARM: defconfig: Update Versatile defconfig
ARM: defconfig: Switch RealView boards to use P111 DRM
ARM: defconfig: Update RealView defconfig
We need to enable MMC_SDHCI option in both omap2plus_defconfig and
multi_v7_defconfig so systems are able to mount root when the dts files
get updated for sdhci.
Then let's update omap2plus_defconfig so we can patch it easier. And as
Arnd noticed earlier, just running make savedefconfig will accidentally
drop few Kconfig options. This is happening because some options are no
longer available as loadable modules like LIRC. Or new dependencies have
been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.
So we first move the unchanged options around to their make savedefconfig
suggested place, then update the options to prevent make savedefconfig
dropping some options accidentally, and then finally drop the unused
options.
And after that we enable options DRM_OMAP and 8250_OMAP. These both have
been around for years now. And we do have 8250_OMAP warn about console
being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
by default. Some users may need to update their inittab to use ttyS*
instead of ttyO* though. If this turns out to be a problem, we may want
to introduce a separate compatible for 8250-omap. But I think we're good
to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
multi_v7_defconfig yet though and first see how 8250_OMAP change plays
out.
We also enable few new options for PM on am335x and am437x, and CEC in
omap2plus_defconfig. Naturally similar options can be later on added to
multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
related PHYs in multi_v7_defconfig to make it more usable for distros.
-----BEGIN PGP SIGNATURE-----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=JiEi
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Pull "Defconfig updates for omap variants for v4.17 merge window"
from Tony Lindgren:
We need to enable MMC_SDHCI option in both omap2plus_defconfig and
multi_v7_defconfig so systems are able to mount root when the dts files
get updated for sdhci.
Then let's update omap2plus_defconfig so we can patch it easier. And as
Arnd noticed earlier, just running make savedefconfig will accidentally
drop few Kconfig options. This is happening because some options are no
longer available as loadable modules like LIRC. Or new dependencies have
been added such as SND_OSSEMUL for selecting SOUND_OSS_CORE.
So we first move the unchanged options around to their make savedefconfig
suggested place, then update the options to prevent make savedefconfig
dropping some options accidentally, and then finally drop the unused
options.
And after that we enable options DRM_OMAP and 8250_OMAP. These both have
been around for years now. And we do have 8250_OMAP warn about console
being redirected with SERIAL_8250_OMAP_TTYO_FIXUP option that is enabled
by default. Some users may need to update their inittab to use ttyS*
instead of ttyO* though. If this turns out to be a problem, we may want
to introduce a separate compatible for 8250-omap. But I think we're good
to go with the SERIAL_8250_OMAP_TTYO_FIXUP warning now. Let's not update
multi_v7_defconfig yet though and first see how 8250_OMAP change plays
out.
We also enable few new options for PM on am335x and am437x, and CEC in
omap2plus_defconfig. Naturally similar options can be later on added to
multi_v7_defconfig, but in this series we only enable OTG, MUSB and the
related PHYs in multi_v7_defconfig to make it more usable for distros.
* tag 'omap-for-v4.17/defconfig-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module
ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants
ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules
ARM: omap2plus_defconfig: Enable 8250_OMAP
ARM: omap2plus_defconfig: Switch to use omapdrm by default
ARM: omap2plus_defconfig: Enable CEC
ARM: omap2plus_defconfig: Enable am335x and am437x PM options
ARM: omap2plus_defconfig: Drop unneeded options
ARM: omap2plus_defconfig: Add SND_OSSEMUL
ARM: omap2plus_defconfig: Update LIRC options
ARM: omap2plus_defconfig: Select MFD_TI_LMU
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth
ARM: omap2plus_defconfig: Update for moved options
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Updates to shmobile defconfig:
* Redresh defconfig to ease future maintenence overhead
* Disable CONFIG_EMBEDDED
Geert Uytterhoeven says "CONFIG_EXPERT exposes too many config options
that do not matter for development. E.g. it prohibits using the default
values for the various SH_SCI options. However, CONFIG_EMBEDDED selects
CONFIG_EXPERT, so it cannot be disabled.
Hence disable CONFIG_EMBEDDED, and compensate for the loss of
CONFIG_DEBUG_KERNEL by enabling the latter.
Actual impact, all harmless:
- CONFIG_NAMESPACES=y (plus a few related CONFIG_*_NS options),
- CONFIG_SYSCTL_SYSCALL=n,
- CONFIG_SERIAL_SH_SCI_NR_UARTS changed from 20 to 18,
- Some HID support became enabled,
- CONFIG_DEBUG_MEMORY_INIT=y,"
* Enable RZA1 pin controller
This allows the Genmai board with RZ/A1 (r7s72100) SoC to once
again boot using the shmobile defconfig.
-----BEGIN PGP SIGNATURE-----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=+vqH
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM Based SoC Defconfig Updates for v4.17" from Simon Horman:
Updates to shmobile defconfig:
* Redresh defconfig to ease future maintenence overhead
* Disable CONFIG_EMBEDDED
Geert Uytterhoeven says "CONFIG_EXPERT exposes too many config options
that do not matter for development. E.g. it prohibits using the default
values for the various SH_SCI options. However, CONFIG_EMBEDDED selects
CONFIG_EXPERT, so it cannot be disabled.
Hence disable CONFIG_EMBEDDED, and compensate for the loss of
CONFIG_DEBUG_KERNEL by enabling the latter.
Actual impact, all harmless:
- CONFIG_NAMESPACES=y (plus a few related CONFIG_*_NS options),
- CONFIG_SYSCTL_SYSCALL=n,
- CONFIG_SERIAL_SH_SCI_NR_UARTS changed from 20 to 18,
- Some HID support became enabled,
- CONFIG_DEBUG_MEMORY_INIT=y,"
* Enable RZA1 pin controller
This allows the Genmai board with RZ/A1 (r7s72100) SoC to once
again boot using the shmobile defconfig.
* tag 'renesas-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: defconfig: Disable CONFIG_EMBEDDED
ARM: shmobile: defconfig: Refresh
ARM: shmobile: Enable RZA1 pin controller
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
-----BEGIN PGP SIGNATURE-----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=heZq
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.17" from Simon Horman:
Enable the following to allow them to be more widely exercised:
* Newly added R8A77965 and R8A77980 SoCs
* PWM and USB as used on R-Car Gen3 SoCs
* tag 'renesas-arm64-defconfig-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: defconfig: enable R8A77965 SoC
arm64: defconfig: Enable PWM and USB for R-Car
arm64: defconfig: enable R8A77980 SoC
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
-----BEGIN PGP SIGNATURE-----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=Lnk+
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
Pull "arm64: Default configuration updates for v4.17-rc1" from Thierry Reding:
Enable the BPMP thermal and CPU frequency drivers as well as make sure
that the Tegra SMMU is enabled by default because there's no fun without
it. Also enable initial Tegra194 support.
* tag 'tegra-for-4.17-arm64-defconfig' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: defconfig: Enable the Tegra SMMU by default
arm64: defconfig: Enable CONFIG_TEGRA_BPMP_THERMAL
arm64: defconfig: Enable CONFIG_ARM_TEGRA186_CPUFREQ
arm64: defconfig: Enable NVIDIA Tegra194 support
When selecting SOC_IMX6SLL but not SOC_IMX6SL, we get a link error:
arch/arm/mach-imx/mach-imx6sl.o: In function `imx6sl_init_late':
mach-imx6sl.c:(.init.text+0x14): undefined reference to `imx6sl_cpuidle_init'
This adds the missing line to the Makefile to also build the cpuidle
support that we need here.
Fixes: dee5dee2a5 ("ARM: imx: Add basic msl support for imx6sll")
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The cpuidle support calls cpu_suspend(), which is compiled conditionally,
and fails to link unless something selects CONFIG_ARM_CPU_SUSPEND.
arch/arm/mach-imx/cpuidle-imx6sx.o: In function `imx6sx_enter_wait':
cpuidle-imx6sx.c:(.text+0x6c): undefined reference to `cpu_suspend'
This adds an explicit select statement here.
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/mxs_defconfig
So keep it in sync to help further changes in defconfig.
The explanation for removing the Kconfig symbols:
CONFIG_FHANDLE=y: verified that it is still selected
selected
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y: does not exist anymore
CONFIG_NVMEM=y: verified that it is still selected
CONFIG_LOCKUP_DETECTOR=y: need to select CONFIG_SOFTLOCKUP_DETECTOR now
CONFIG_TIMER_STATS=y: does not exist anymore
Boot tested on a imx28evk.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
fsl-asoc-card machine driver also supports sgtl5000, so use it favor
of the imx-sgtl5000 machine driver, which will be probably be removed
in the future.
Tested on a imx25-pdk board.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Re-sync the defconfig by doing:
make savedefconfig
cp defconfig arch/arm/configs/imx_v4_v5_defconfig
So keep it in sync to help further changes in defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This patch enables the CONFIG_STMMAC_ETH to the default arm64 defconfig:
-CONFIG_STMMAC_ETH=m
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_IPQ806X=m
+CONFIG_DWMAC_MESON=m
+CONFIG_DWMAC_ROCKCHIP=m
+CONFIG_DWMAC_SUNXI=m
+CONFIG_DWMAC_SUN8I=m
The STMMAC ethernet controller is on the Stratix10 platform, and thus needs
driver to be in the kernel image for NFS to work.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
We need the CPCAP MFD and regulator built-in for UART console to work,
the rest can be loadable modules. Note that users probably want to also
enable serial 8250_OMAP that is not yet enabled by default.
Signed-off-by: Tony Lindgren <tony@atomide.com>
The DRM driver is now finalized for the Versatile board family,
so switch the defconfig to use this driver instead of the old
fbdev driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This updates the Versatile defconfig to the latest savedefconfig
results reflecting changes in Kconfig. We add in the Flash memory
support that has been available upstream for a while now.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The DRM driver is now finalized for the RealView board family,
so switch the defconfig to use this driver instead of the old
fbdev driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Just update with some new results from savedefconfig so we are
in sync with what has happened in Kconfig upstream.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Add i.MX 6SoloLiteLite (i.MX6SLL) SoC support on top of the existing
i.MX6SL platform code.
- Improve the SoC revision mapping by utilizing the MAJOR field of
ANATOP DIGPROG register.
- Add CPUIDLE_FLAG_TIMER_STOP flag for cpuidle ARM power off state,
so that we can use ARM generic timer for some i.MX6 SoC.
- Set low-power interrupt mask for i.MX25 to support STOP mode.
- Drop EPIT driver as there is no user of it.
- Simplify the error path of imx6_pm_get_base() a bit.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaqidWAAoJEFBXWFqHsHzO5OgIALasN3eUJ8TmVJOChBBC4lCc
20e9B0dqrnKfh3rXfPKl2LiG7SWid288V1T9X4K54PScgSaWFvV8zAwabchXP1Ev
cl2yUzOT7YZlcRFw8EYJufEPS41KgTrF84Vkm6hDYeEErKDu9tw/L8qyhMPm6421
jkHvfU4kVVtJ+k9szwId7ua7nw021l9KtI1G1qdQZ3e/Kkagg3/MemVKiAERsou3
J11hUc5rG5+1/5pgU7HTwN2q3Q6JbBvhF2MHfVEuAP0GUVBk2hFAD4mxczcvSOjW
KyQJQaQ4qEbpiJqdaHhBjA2XDSASo8S/y/92AdMRs+4+U9g0BbB+LaPyD4DVt6Y=
=YDxX
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
Pull "i.MX SoC changes for 4.17" from Shawn Guo:
- Add i.MX 6SoloLiteLite (i.MX6SLL) SoC support on top of the existing
i.MX6SL platform code.
- Improve the SoC revision mapping by utilizing the MAJOR field of
ANATOP DIGPROG register.
- Add CPUIDLE_FLAG_TIMER_STOP flag for cpuidle ARM power off state,
so that we can use ARM generic timer for some i.MX6 SoC.
- Set low-power interrupt mask for i.MX25 to support STOP mode.
- Drop EPIT driver as there is no user of it.
- Simplify the error path of imx6_pm_get_base() a bit.
* tag 'imx-soc-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Add basic msl support for imx6sll
ARM: imx: pm-imx6: Return the error directly
ARM: imx: avic: set low-power interrupt mask for imx25
ARM: imx: Improve the soc revision calculation flow
ARM: imx: add timer stop flag to ARM power off state
ARM: imx: Remove epit support
This patchs adds the minimal defconfig for the OXNAS ARMv6 SoCs
including the OX820 SoC and needed minimal configurations.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Display and graphics can't work together without an SMMU, so it is
effectively always getting enabled anyway.
Signed-off-by: Thierry Reding <treding@nvidia.com>
ARM-based SoC for 4.17, please pull the following:
- Tuomas enables the BCM2835 AUX driver which is necessary to provide
console on the Raspberry Pi 3
- Stefan turns on support for the BCM43438 Bluetooth adapter connected
via UART on the Raspberry Pi Zero Wireless and he also turns on
support for the thermal driver on the Pi 2 and 3.
-----BEGIN PGP SIGNATURE-----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=3aYj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.17/defconfig' of https://github.com/Broadcom/stblinux into next/soc
Pull "Broadcom defconfig changes for 4.17" from Florian Fainelli:
This pull request contains multi_v7_defconfig changes for Broadcom
ARM-based SoC for 4.17, please pull the following:
- Tuomas enables the BCM2835 AUX driver which is necessary to provide
console on the Raspberry Pi 3
- Stefan turns on support for the BCM43438 Bluetooth adapter connected
via UART on the Raspberry Pi Zero Wireless and he also turns on
support for the thermal driver on the Pi 2 and 3.
* tag 'arm-soc/for-4.17/defconfig' of https://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: Enable thermal driver for RPi 2/3
ARM: bcm2385_defconfig: Enable BT support for BCM43438
ARM: multi_v7_defconfig: Enable serial console on RPi 3
- minor changes for property API
- clock API fix for ULPI driver warning
It exceptionally contains a merge from the mtd tree from Boris
to prevent any merge conflicts in the PXA tree.
-----BEGIN PGP SIGNATURE-----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=/vgG
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.17' of https://github.com/rjarzmik/linux into next/soc
Pull "This is the pxa changes for v4.17 cycle" from Robert Jarzmik:
- minor changes for property API
- clock API fix for ULPI driver warning
It exceptionally contains a merge from the mtd tree from Boris
to prevent any merge conflicts in the PXA tree.
* tag 'pxa-for-4.17' of https://github.com/rjarzmik/linux:
ARM: pxa/raumfeld: use PROPERTY_ENTRY_U32() directly
ARM: pxa: ulpi: fix ulpi timeout and slowpath warn
ARM: pxa: cm-x300: remove inline directive
ARM: pxa: fix static checker warning in pxa3xx-ulpi
MAINTAINERS: remove entry for deleted pxa3xx_nand driver
arm: dts: pxa: use reworked NAND controller driver
dt-bindings: mtd: remove pxa3xx NAND controller documentation
mtd: nand: remove useless fields from pxa3xx NAND platform data
mtd: nand: remove deprecated pxa3xx_nand driver
mtd: nand: use Marvell reworked NAND controller driver with all platforms
- Rename Atmel to Microhip in MAINTAINERS, Documentation and Kconfig
-----BEGIN PGP SIGNATURE-----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=oLw9
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.17-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/soc
Pull "AT91 SoC for 4.17: from Alexandre Belloni:
- Rename Atmel to Microhip in MAINTAINERS, Documentation and Kconfig
* tag 'at91-ab-4.17-soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91: Kconfig: Update company to Microchip
Documentation: at91: Update Microchip SoC documentation
MAINTAINERS: ARM: at91: update entry for ARM/Microchip
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BscW
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi into next/soc
Pull "ARM64: hisilicon: defconfig updates for 4.17" from Wei Xu:
- Enable deadline IO scheduler to improve the performnace for some
usecaese without changing the default IO scheduler
* tag 'hisi-defconfig-for-4.17' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: enable IOSCHED_DEADLINE
The multi-cluster SMP code maps the address spaces of several hardware
control blocks. The device nodes for them are SoC-specific. To help with
supporting other SoCs to re-use this code, these bits should be split
out to a separate function tied to the enable-method string.
This patch splits out and groups the device node lookup sequence, and
adds new data structures to have the newly created function tied to
the enable method string. This structure can also be used to encode
other differences between the SoCs.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Instead of having an early init function check the machine compatible
and installing multi-cluster SMP support for the A80 if it matches,
use a new cpu enable-method string. This makes the platform support
future proof in case anyone manages to add PSCI support.
The original init code for the SMP support is changed into the
.prepare_cpus callback in the smp_operations structure. Instead of
panicing when resources are missing like on some platforms, our code
merely guards against engaging SMP or CPU hotplug and returns an error.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The sunxi_mc_smp_lookback function is modeled after the mcpm_loopback
function in the MCPM framework. "lookback" was a typo introduced when
the new function was added.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Enable Tegra BPMP thermal sensor support by default, built as a module.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable Tegra186 CPU frequency scaling support by default.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add basic MSL support for i.MX6SLL.
The i.MX 6SoloLiteLite application processors are NXP's latest
additions to a growing family of multimedia-focused products
offering high-performance processing optimized for lowest power
consumption. The i.MX 6SoloLiteLite processors feature NXP's advanced
implementation of the ARM Cortex-A9 core, which can be interfaced
with LPDDR3 and LPDDR2 DRAM memory devices.
Signed-off-by: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the various CPUFREQ governors and statistics to ease development.
Don't change the default governor - performance governor.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the driver for the TSENS IP that is present across several QCOM
SoCs.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
The APCS block is present on several Qualcomm SoCs e.g. 8916, 8996. On the
8916 it is needed to enable the clock controller that in turn enables
cpufreq on the platform while on the 8996 it is needed for communication
with RPM.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
