Commit Graph

2544 Commits

Author SHA1 Message Date
Dmitry Torokhov
8521478f67 Input: synaptics - fix touchpad not working after S2R on Vostro V13
Synaptics touchpads on several Dell laptops, particularly Vostro V13
systems, may not respond properly to PS/2 commands and queries immediately
after resuming from suspend to RAM. This leads to unresponsive touchpad
after suspend/resume cycle.

Adding a 1-second delay after resetting the device allows touchpad to
finish initializing (calibrating?) and start reacting properly.

Reported-by: Daniel Manrique <daniel.manrique@canonical.com>
Tested-by: Daniel Manrique <daniel.manrique@canonical.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12 00:06:56 -08:00
Xi Wang
3a7f8fb1d8 Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq()
The error check (intr_status < 0) didn't work because intr_status is
a u8.  Change its type to signed int.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12 00:01:02 -08:00
Chris Bagwell
0d0e3064a8 Input: wacom - add product id used by Samsung Slate 7
New product ID reported by Harvey Braun on linuxwacom mailing list
and also tested this patch with new hardware.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-12-12 00:00:55 -08:00
Aaro Koskinen
77f6ca5a62 Input: ams_delta_serio - include linux/module.h
Fix the following compilation failure with v3.2-rc1 by including module.h:

  CC      drivers/input/serio/ams_delta_serio.o
drivers/input/serio/ams_delta_serio.c:33:15: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c:34:20: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c:35:16: error: expected declaration specifiers or '...' before string constant
drivers/input/serio/ams_delta_serio.c: In function 'ams_delta_serio_init':
drivers/input/serio/ams_delta_serio.c:155:2: error: 'THIS_MODULE' undeclared (first use in this function)
drivers/input/serio/ams_delta_serio.c:155:2: note: each undeclared identifier is reported only once for each function it appears in

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-09 21:19:54 -08:00
JJ Ding
3940d6185a Input: elantech - adjust hw_version detection logic
This patch fixes some v3 hardware (fw_version: 0x150500) wrongly detected
as v2 hardware.

Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Tested-By: Marc Dietrich <marvin24@gmx.de>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-09 21:19:47 -08:00
Tomas Miljenović
b42c909743 Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
Touchpad input doesn't work with newer HP Pavilion dv4 laptops due to bad i8042
timeout data.  Booting with i8042.notimeout and i8042.nomux successfully works
around the problem.

This patch adds the devices to the i8042 notimeout and nomux blacklists.

Signed-off-by: Tomas Miljenovic <TomasM@tomasm.tk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-11-05 00:03:21 -07:00
Dmitry Torokhov
6ad390a25a Merge branch 'next' into for-linus 2011-10-26 21:46:20 -07:00
Michael Hennerich
3f48e73543 Input: adp5589-keys - add support for the ADP5585 derivatives
The ADP5585 family keypad decoder and IO expander is similar to the ADP5589,
however it features less IO pins, and lacks hardware assisted key-lock
functionality. Unfortunately the register addresses are different, as well as
the event codes and bit organization within the port related registers.

Move ADP5589 Register defines from the header file into the main source file.
Add new defines while making sure we don't break existing platform_data.
Add register address translation, and turn device specific defines into variables.
Introduce some helper functions and disable functions that doesn't
exist on the added devices.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-18 21:26:55 -07:00
Hui Wang
81e8f2bc82 Input: imx_keypad - add pm suspend and resume support
The imx_keypad driver was indicating that it was wakeup capable in
imx_keypad_probe(), but it didn't implement suspend or resume methods.

According to the i.MX series MCU Reference Manual, the kpp (keypad
port) is a major wake up source which can detect any key press even
in low power mode and even when there is no clock.

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-12 21:13:16 -07:00
Dan Carpenter
05be8b81aa Input: force feedback - potential integer wrap in input_ff_create()
The problem here is that max_effects can wrap on 32 bits systems.
We'd allocate a smaller amount of data than sizeof(struct ff_device).
The call to kcalloc() on the next line would fail but it would write
the NULL return outside of the memory we just allocated causing data
corruption.

The call path is that uinput_setup_device() get ->ff_effects_max from
the user and sets the value in the ->private_data struct.  From there
it is:
-> uinput_ioctl_handler()
   -> uinput_create_device()
      -> input_ff_create(dev, udev->ff_effects_max);

I've also changed ff_effects_max so it's an unsigned int instead of
a signed int as a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-12 21:13:11 -07:00
Philip Rakity
341deefe8f Input: tsc2007 - make sure that X plate resistance is specified
Abort driver initialization if X plate resistance was not specified in
platform data as it will cause pressure to be always calculated as 0,
and making userspace ignore touch coordinates.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-11 20:56:41 -07:00
Dmitry Torokhov
550eca7caf Input: serio_raw - fix memory leak when closing char device
Apparently we never freed memory allocated when users open our char
devices nor removed old users from the list of connected clients.

Also unregister misc device immediately upon disconnecting the port
instead of waiting until last user drops off (refcounting in misc
device code will make sure needed pieces stay around while they
are needed) and make sure we are not holing holding serio_raw_mutex
when registering/unregistering misc device. This should fix potential
deadlock between serio_raw and misc device code uncovered by lockdep
and reported by Thomas Tuttle.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:23 -07:00
Dmitry Torokhov
8c1c10d570 Input: serio_raw - kick clients when disconnecting port
Send SIGIO/POLL_HUP and otherwise wake up waiters when corresponding serio
port is being disconnected. Also check if port is dead in serio_raw_poll
and signal POLLHUP|POLLERR.

This should speed up process of releasing dead devices by userspace
applications.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:18 -07:00
Dmitry Torokhov
85f5b35da8 Input: serio_raw - explicitly mark disconnected ports as dead
Instead of relying on setting serio_raw->serio to NULL upon disconnecting
ports mark them explicitly as "dead". Also take and carry reference to
underlying serio port to make sure it does not go away until we are done
with it.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:13 -07:00
Dmitry Torokhov
15a564d8db Input: serio_raw - fix coding style issues
This makes checkpatch.pl happy with the driver

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:10 -07:00
Dmitry Torokhov
8d92847700 Input: serio_raw - use dev_*() for messages
This will ensure our reporting is consistent with the rest of the system.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:05 -07:00
Dmitry Torokhov
8c31eb01e1 Input: serio_raw - use bool for boolean data
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:35:00 -07:00
Dmitry Torokhov
843e784afe Input: serio_raw - perform proper locking when adding clients to list
Make sure we hold serio lock when adding clients to client list so that
we do not race with serio_raw_release() removing clients from the same
list.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:55 -07:00
Dmitry Torokhov
7c5bbb2eb7 Input: serio_raw - rename serio_raw_list to serio_raw_client
'serio_raw_list' and 'list' names do not accurately represent their objects
and are extremely confusing when reading the code. Let's use better suited
names.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:52 -07:00
Dmitry Torokhov
ba538cd2a8 Input: serio_raw - use kref instead of rolling out its own refcounting
Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:34:47 -07:00
Dmitry Torokhov
b5d2170436 Input: psmouse - switch to using dev_*() for messages
This will ensure our reporting is consistent with the rest of the system
and we do not refer to obsolete source file names.

Reviewed-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: JJ Ding <dgdunix@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 18:28:16 -07:00
Chris Bagwell
ae927560a7 Input: wacom - correct max Y value on medium bamboos
Medium size Bamboo P&T driver reused max X/Y form older Bamboo 1
medium size tablets and never updated to real value. Actual
active area of tablet is slightly larger in Y direction.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 08:55:37 -07:00
Chris Bagwell
c18c2cec31 Input: wacom - add ABS_DISTANCE to Bamboo Pen reports
Tablet reports a distance of 0 right at highest point possible
to be in proximity and distance_max when touching tablet. Inverse
the distance since user land has no way of knowing ABS_DISTANCE
is not distance from tablet.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 08:55:34 -07:00
Chris Bagwell
3d11ae8190 Input: wacom - remove unneeded touch pressure initialization
These were left in during removal of touch pressure reports but not
needed now.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-10 08:55:30 -07:00
Dmitry Torokhov
f80aee7fd0 Input: lm8323 - wrap suspend and resume in CONFIG_PM_SLEEP
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined,
however suspend and resume methods are only valid in the context of
CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following
warning (courtesy of Geerts randconfig builds):

	lm8323.c: warning: 'lm8323_resume' defined but not used

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:43:09 -07:00
Dmitry Torokhov
d4f4158dcd Input: ad7879-i2c - wrap suspend and resume in CONFIG_PM_SLEEP
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined,
however suspend and resume methods are only valid in the context of
CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following
warning (courtesy of Geerts randconfig builds):

	ad7879-i2c.c: warning: 'ad7879_i2c_resume' defined but not used

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:43:05 -07:00
Dmitry Torokhov
26e56eb2bf Input: synaptics_i2c - wrap suspend and resume in CONFIG_PM_SLEEP
CONFIG_PM is defined when CONFIG_PM_SLEEP or CONFIG_PM_RUNTIME is defined,
however suspend and resume methods are only valid in context of
CONFIG_PM_SLEEP. If only CONFIG_PM_RUNTIME is defined we get the following
warning (courtesy of Geerts randconfig builds):

	synaptics_i2c.c: warning: 'synaptics_i2c_resume' defined but not used

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:43:00 -07:00
Dmitry Torokhov
cb31f898cc Input: mma8450 - silence some 'uninitialized variable' warnings
Sometimes GCC is not smart enough to recognize that x, y and z are
always used properly initialized in mma8450_poll(). Let's rearrange
the code a bit to help GCC.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:41:57 -07:00
Daniel Kurtz
626af86112 Input: atmel_mxt_ts - use snprintf for sysfs attribute show method
Sysfs attribute show methods are always passed a buffer of length
PAGE_SIZE.  To keep from overwriting this buffer and causing havoc, use
snprintf() to guarantee we never write more than the buffer can hold.

In addition, at least for my touchscreen, the number and size of objects
was far too big to fit in a single 4K page.  Therefore, this patch also
trims some redundant framing text to leave more room for actual data.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-06 19:41:52 -07:00
Ping Cheng
04c59abd3c Input: wacom - make LED status readable through sysfs
Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:24 -07:00
Ping Cheng
09e7d94107 Input: wacom - add LED support for Cintiq 21ux2
Cintiq 21ux2 has two sets of four LEDs on right and left side of
the tablet, respectively.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:21 -07:00
Ping Cheng
77e82516a6 Input: wacom - don't expose LED inactive option
The LED also indicates the status of the tablet. Don't turn it off.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:17 -07:00
Ping Cheng
f4fa9a6d80 Input: wacom - lower the LED luminance
The LED luminance level is normally lower when no button is pressed.

Reviewed-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Tested-by: Eduard Hasenleithner <eduard@hasenleithner.at>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-05 00:26:00 -07:00
Jason Gerecke
d6069dae47 Input: wacom - revert "Cintiq 21UX2 does not have menu strips"
This reverts commit 71c86ce597.
The 21UX2 does have touchstrips, but they are in a somewhat-
hidden location.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-10-04 22:54:05 -07:00
Sebastian Andrzej Siewior
f01536e3d6 Input: add a driver for TSC-40 serial touchscreen
This patch adds the TSC-40 serial touchscreen driver and should be
compatible with TSC-10 and TSC-25.

The driver was written by Linutronix on behalf of Bachmann electronic GmbH.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-28 10:24:14 -07:00
Tobias Klauser
cca84699a0 Input: gpio_keys - use of_property_read_u32()
Use the of_property_read_u32() helper function to retrieve u32 values
from the device tree. Also do not pass the len parameter to
of_get_property if it isn't checked afterwards.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:32 -07:00
Dmitry Torokhov
c3a01ba9e4 Input: penmount - simplify unregister procedure
Since touchscreen driver does not handle any events to be sent to the
device we can close serio port first and then unregister the input device.

Tested-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:31 -07:00
Dmitry Torokhov
98b013eb7a Input: penmount - rework handling of different protocols
Instead of having one large switch based on product ID use pointer to
function actually doing protocol decoding.

Tested-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:30 -07:00
John Sung
bd8f6d2ed4 Input: penmount - add PenMount 6250 support
Add multi touch support for PenMount 6250 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:30 -07:00
John Sung
90aba7d8b1 Input: penmount - add PenMount 3000 support
Add dual touch support for PenMount 3000 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:29 -07:00
John Sung
c42e2e406a Input: penmount - add PenMount 6000 support
Add support for PenMount 6000 touch controller.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:29 -07:00
John Sung
21ae508bab Input: penmount - fix the protocol
The MSB and LSB of the XY axis value are switched according to the PenMount 9000 protocol. The driver name is also changed from penmountlpc, since it is not for LPC interface at all.

Signed-off-by: John Sung <penmount.touch@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:28 -07:00
JJ Ding
4af61e9027 Input: elantech - remove module parameter force_elantech
This essentially reverts commit f81bc788ff.

With recent work on elantech driver, I believe we now have complete support
for all elantech touchpads. So remove this hack.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:28 -07:00
JJ Ding
84a90b610a Input: elantech - better support all those v2 variants
V2 hardware has many variants. This patch adddresses two issues:

 - some model also has debounce packets, but with a different signature
   than v3. Now we just check debounce for all v2 hardware.

 - due to different scanning methods the hardware uses, x and y ranges have
   to be calculated differently. And for some specific versions, we can just
   see them as custom-made, so set {x, y} the same values as Windows driver
   does.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Tested-by: Richard Schütz <r.schtz@t-online.de>
Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-20 22:46:27 -07:00
Chris Bagwell
8f9068609e Input: wacom - fix touch parsing on newer Bamboos
Bamboos with Product ID's > 0xD4 return values unrelated to pressure
in touch 1 pressure field.  They also report 2nd touch X/Y values
shifted down 1 byte (where pressure was).  This results in jumpy
1 finger touch and totally invalid 2nd finger data.

For touch detection, switch to a Touch Present single bit that
all versions of Bamboo support.

For touch 2 offset, calculate offset based on a bit that is set
different between the two packet layouts.

Since touch pressure reports were removed from driver, there was
no need to be reading pressure any more.

Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-12 22:08:59 -07:00
Pieter-Augustijn Van Malleghem
1c601beaf2 Input: bcm5974 - add MacBookAir4,1 trackpad support
This patch adds trackpad support for the MacBookAir4,1, released in July 2011.
It is very similar to the MacBookAir4,2 patch submitted by Joshua Dillon and
Chase Douglas.

Signed-off-by: Pieter-Augustijn Van Malleghem <p-a@scarlet.be>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 13:32:27 -07:00
JJ Ding
1dc6edec12 Input: elantech - add v4 hardware support
v4 hardware is a true multitouch capable touchpad (up to 5 fingers).
The packet format is quite complex, please see protocol document for
reference.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:35:02 -07:00
JJ Ding
28f4961611 Input: elantech - add v3 hardware support
v3 hardware's packet format is almost identical to v2 (one/three finger touch),
except when sensing two finger touch, the hardware sends 12 bytes of data.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:58 -07:00
JJ Ding
3c8bbb951a Input: elantech - clean up elantech_init
Group property setting code into elantech_set_properties.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:55 -07:00
JJ Ding
7894f21b10 Input: elantech - packet checking for v2 hardware
For v2 hardware, there is no real parity check, but we can still check
some constant bits for data integrity.

Also rename elantech_check_parity_v1 to elantech_packet_check_v1 to make
these packet checking function names consistent.

Signed-off-by: JJ Ding <jj_ding@emc.com.tw>
Acked-by: Daniel Kurtz <djkurtz@chromium.org>
Acked-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-09-09 10:34:50 -07:00