Use power state to decide whether we can enter or leave IPS accurately,
and then prevent to power on/off twice.
The commit 6bf3a08340 ("wifi: rtw88: add flag check before enter or leave IPS")
would like to prevent this as well, but it still can't entirely handle all
cases. The exception is that WiFi gets connected and does suspend/resume,
it will power on twice and cause it failed to power on after resuming,
like:
rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2
rtw_8723de 0000:03:00.0: mac power on failed
rtw_8723de 0000:03:00.0: failed to power on mac
rtw_8723de 0000:03:00.0: leave idle state failed
rtw_8723de 0000:03:00.0: failed to leave ips state
rtw_8723de 0000:03:00.0: failed to leave idle state
rtw_8723de 0000:03:00.0: failed to send h2c command
To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state,
and call rtw_mac_pre_system_cfg() to configure registers properly between
power-off/-on.
Reported-by: Paul Gover <pmw.gover@yahoo.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016
Fixes: 6bf3a08340 ("wifi: rtw88: add flag check before enter or leave IPS")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
Now that we send URBs with the URB_ZERO_PACKET flag set we no longer
need to make sure that the URB sizes are not multiple of the
bulkout_size. Drop the check.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230210111632.1985205-4-s.hauer@pengutronix.de
Zero length packets are necessary when sending URBs with size
multiple of bulkout_size, otherwise the hardware just stalls.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230210111632.1985205-3-s.hauer@pengutronix.de
We have to extract qsel from the skb before doing skb_push() on it,
otherwise qsel will always be 0.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230210111632.1985205-2-s.hauer@pengutronix.de
Replace the magic numbers for the intf_mask with their existing
RTW_PWR_INTF_PCI_MSK and RTW_PWR_INTF_USB_MSK macros to make the code
easier to understand.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230204233001.1511643-5-martin.blumenstingl@googlemail.com
This code is not specific to the PCIe bus type but can be re-used by USB
and SDIO bus types. Move it to tx.{c,h} to avoid code-duplication in the
future. While here, add checking of the ac argument in
rtw_tx_ac_to_hwq() so we're not accessing entries beyond the end of the
array.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230204233001.1511643-4-martin.blumenstingl@googlemail.com
This makes it easier to understand which values are allowed for the
"queue" variable when using the enum instead of an u8.
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230204233001.1511643-3-martin.blumenstingl@googlemail.com
rtw_hw_queue_mapping() and ac_to_hwq[] hold values of type enum
rtw_tx_queue_type. Change their types to reflect this to make it easier
to understand this part of the code.
While here, also change the array to be static const as it is not
supposed to be modified at runtime.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230204233001.1511643-2-martin.blumenstingl@googlemail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Use non-atomic rtw_iterate_stas() in rtw_ra_mask_info_update() because
the iterator function rtw_ra_mask_info_update_iter() needs to read and
write registers from within rtw_update_sta_info(). Using the non-atomic
iterator ensures that we can sleep during USB and SDIO register reads
and writes. This fixes "scheduling while atomic" or "Voluntary context
switch within RCU read-side critical section!" warnings as seen by SDIO
card users (but it also affects USB cards).
Fixes: 78d5bf925f ("wifi: rtw88: iterate over vif/sta list non-atomically")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-4-martin.blumenstingl@googlemail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Make rtw_watch_dog_work() use rtw_iterate_vifs() to prevent "scheduling
while atomic" or "Voluntary context switch within RCU read-side
critical section!" warnings when accessing the registers using an SDIO
card (which is where this issue has been spotted in the real world but
it also affects USB cards).
Fixes: 78d5bf925f ("wifi: rtw88: iterate over vif/sta list non-atomically")
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-3-martin.blumenstingl@googlemail.com
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Shrink the RCU critical section so it only cover the call to
ieee80211_find_sta() and finding the ic_vht_cap/vht_cap based on the
found station. This moves the chip's BFEE configuration outside the
rcu_read_lock section and thus prevent "scheduling while atomic" or
"Voluntary context switch within RCU read-side critical section!"
warnings when accessing the registers using an SDIO card (which is
where this issue has been spotted in the real world - but it also
affects USB cards).
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230108211324.442823-2-martin.blumenstingl@googlemail.com
The driver uses ieee80211_iterate_active_interfaces_atomic()
and ieee80211_iterate_stations_atomic() in several places and does
register accesses in the iterators. This doesn't cope with upcoming
USB support as registers can only be accessed non-atomically.
Split these into a two stage process: First use the atomic iterator
functions to collect all active interfaces or stations on a list, then
iterate over the list non-atomically and call the iterator on each
entry.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Suggested-by: Ping-Ke shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-7-s.hauer@pengutronix.de
coex->mutex is used in rtw_coex_info_request() only. Most callers of this
function hold rtwdev->mutex already, except for one callsite in the
debugfs code. The debugfs code alone doesn't justify the extra lock, so
acquire rtwdev->mutex there as well and drop the now unnecessary
spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-6-s.hauer@pengutronix.de
The h2c.lock spinlock is used in rtw_fw_send_h2c_command() and
rtw_fw_send_h2c_packet(). Most callers call this with rtwdev->mutex
held, except from one callsite in the debugfs code. The debugfs code
alone doesn't justify the extra lock, so acquire rtwdev->mutex in
debugfs and drop the now unnecessary spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-5-s.hauer@pengutronix.de
The rtwdev->rf_lock spinlock protects the rf register accesses in
rtw_read_rf() and rtw_write_rf(). Most callers of these functions hold
rtwdev->mutex already with the exception of the callsites in the debugfs
code. The debugfs code doesn't justify an extra lock, so acquire the mutex
there as well before calling rf register accessors and drop the now
unnecessary spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-4-s.hauer@pengutronix.de
rtw_fw_beacon_filter_config() is called once with rtwdev->mutex held
and once without the mutex held. Call it consistently with rtwdev->mutex
held.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-3-s.hauer@pengutronix.de
It's confusing to read two different firmware versions in the syslog
for the same device:
rtw_8822cu 2-1:1.2: Firmware version 9.9.4, H2C version 15
rtw_8822cu 2-1:1.2: Firmware version 9.9.11, H2C version 15
Print the firmware type in this message to make clear these are really
two different firmwares for different purposes:
rtw_8822cu 1-1.4:1.2: WOW Firmware version 9.9.4, H2C version 15
rtw_8822cu 1-1.4:1.2: Firmware version 9.9.11, H2C version 15
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-2-s.hauer@pengutronix.de
8821ce is a combo card, and BT is a USB device that could get card lost
during stress test, and need WiFi firmware to detect and recover it, so
driver sends a H2C to enable this mechanism.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221128075653.5221-1-pkshih@realtek.com
For SDIO/USB interface, since the tranferring speed is slower than
that in PCIE, it may have race condition when the driver sets down
H2C command to the FW.
In the function rtw_fw_send_h2c_command, before the patch, box_reg
is written first, then box_ex_reg is written. FW starts to work and
fetch the value of box_ex_reg, when the most significant byte of
box_reg(4 bytes) is written. Meanwhile, for SDIO/USB interface,
since the transferring speed is slow, the driver is still in writing
the new value of box_ex_reg through the bus, and FW may get the
wrong value of box_ex_reg at the moment.
To prevent the above driver/FW racing situation, box_ex_reg is
written first then box_reg. Furthermore, it is written in 4 bytes at
a time, instead of written in one byte one by one. It can increase
the speed for SDIO/USB interface.
Signed-off-by: Ji-Pin Jou <neo_jou@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221124064442.28042-1-pkshih@realtek.com
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
* refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
* support CYW43439 SDIO chipset
* support BCM4378 on Apple platforms
* support CYW89459 PCIe chipset
rtw89
* more work to get rtw8852c supported
* P2P support
* support for enabling and disabling MSDU aggregation via nl80211
mt76
* tx status reporting improvements
ath11k
* cold boot calibration support on WCN6750
* Target Wake Time (TWT) debugfs support for STA interface
* support to connect to a non-transmit MBSSID AP profile
* enable remain-on-channel support on WCN6750
* implement SRAM dump debugfs interface
* enable threaded NAPI on all hardware
* WoW support for WCN6750
* support to provide transmit power from firmware via nl80211
* support to get power save duration for each client
* spectral scan support for 160 MHz
wcn36xx
* add SNR from a received frame as a source of system entropy
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmM3BGYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuR3Af/XiuMlnDB6flq+M/kQHLWWvHybLw5aCJ7
l3yXhNFWxpBl2hQXtj17JSjVCYQmxbfrgRqhbNhyACO25bpymCb5QctB9X+Y7TwL
250JmuKvQfFx5oJNRfJ67dKTf3raloQYbdEMJNqySgebL+eSfrDskc9vaCLVDmCK
I994fl0Q1wUbJ6fbuIFd07ti8ay6UlSS/iakv4+nEeimabtZWJWlXBWYRpKpikdP
h9z2kPtss6yz6seaQuw6ny+qysYLi11Tp+Cued9XR3dWOOhB2X1tLHH0H02xPw76
9OJZEJHycP2juxjMfAaktHY+VX36GPLsMLUTVusH0h/Fdy3VG8YSAw==
=emmG
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the missing destroy_workqueue() before return from rtw_core_init()
in error path.
Fixes: fe101716c7 ("rtw88: replace tx tasklet with work queue")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com
clang reports uninitialized use:
>> drivers/net/wireless/realtek/rtw88/main.c:731:2: warning: variable
'primary_channel_idx' is used uninitialized whenever switch default is
taken [-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/net/wireless/realtek/rtw88/main.c:754:39: note: uninitialized
use occurs here
hal->current_primary_channel_index = primary_channel_idx;
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw88/main.c:687:24: note: initialize the
variable 'primary_channel_idx' to silence this warning
u8 primary_channel_idx;
^
= '\0'
This situation could not happen, because possible channel bandwidth
20/40/80MHz are enumerated.
Fixes: 341dd1f7de ("wifi: rtw88: add the update channel flow to support setting by parameters")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20220815062004.22920-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mac80211 core may ask driver to change to idle mode during HW scan,
then H2C command for HW scan will send failed since chip is in idle
mode. Therefore, We check the SCANNING flag before entering IPS to
prevent this behavior.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-8-pkshih@realtek.com
Enter or leave IPS controlled by mac80211 before driver support HW
scan. After support HW scan, driver need to control IPS before start
HW scan and scan complete, but mac80211 also ask driver enter or leave
IPS. Therefore, we add flag check in IPS to prevent entering or
leaving IPS twice.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-7-pkshih@realtek.com
We need to flush queue before HW scan to avoid packets dropped by hardware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-6-pkshih@realtek.com
During HW scan, the channel related feilds in hal struct changed partially.
If setting Tx power will get WARNING:rtw_get_tx_power_params() due to some
of fields in hal struct mismatch. Therefore, we fix to change all required
fields in hal struct when channel switch during HW scan.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-5-pkshih@realtek.com
In order to set channel info to hal during HW scan, we add the update
channel flow to support setting by parameters to meet the HW scan
requriement.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-4-pkshih@realtek.com
Applying regulatory and getting Tx power table will access hal
data, it should hold rtwdev::mutex to avoid hal data changed during
setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-3-pkshih@realtek.com
Applying SAR will access hal data, it should hold rtwdev::mutex
to avoid hal data changed during setting flow.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809084107.38137-2-pkshih@realtek.com
Since chip_info has became const table, we must access them via const
pointer to avoid invalid writing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065232.28510-1-pkshih@realtek.com
reported by smatch
phy.c:854 rtw_phy_linear_2_db() error: buffer overflow 'db_invert_table[i]'
8 <= 8 (assuming for loop doesn't break)
However, it seems to be a false alarm because we prevent it originally via
if (linear >= db_invert_table[11][7])
return 96; /* maximum 96 dB */
Still, we adjust the code to be more readable and avoid smatch warning.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-5-pkshih@realtek.com
The original timing that store OP channel info is after associated.
However, HW scan might happen before associated without backing to
OP channel, that will cause authentication or association fail.
Therefore, we modify the timing of storing OP channel info.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-4-pkshih@realtek.com
HW scan need to start queues after switch to OP channel, and stop queues
before leaving op channel. However, in original code, driver will start
queues after switch to OP channel, but stop queues until switch to OP
channel next time, that will cause packets transmitted in wrong channel.
So we fix the stop queues timing.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-3-pkshih@realtek.com
Some WSC IEs require size larger than we current supports. Extend size
to fit those demands. Separate the registered scan IE length by IC so
settings can be independent.
Since old firmware uses fewer page number, define a firmware feature to
be compatible with various firmware version.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220727065003.28340-2-pkshih@realtek.com
The function alloc_workqueue() in rtw_core_init() can fail, but
there is no check of its return value. To fix this bug, its return value
should be checked with new error handling code.
Fixes: fe101716c7 ("rtw88: replace tx tasklet with work queue")
Reported-by: Hacash Robot <hacashRobot@santino.com>
Signed-off-by: William Dean <williamsukatube@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220723063756.2956189-1-williamsukatube@163.com
When calling start/stop_ap(), mac80211 already has a protected
link_conf pointer. Pass it to the driver, so it shouldn't
handle RCU protection.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Start making some SMPS related code MLD-aware. This isn't
really done yet, but again cuts down our 'deflink' reliance.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
