Register both the port and partner USB Power Delivery
Capabilities so they are exposed to the user space.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-4-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the USB Type-C Connector Class devices are protected, so
the drivers can not directly access them. This will adds a
few helpers that can be used to link the ports and partners
to the correct USB Power Delivery objects.
For ports a new optional sysfs attribute file is also added
that can be used to select the USB Power Delivery
capabilities that the port will advertise to the partner.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introducing a small device class for USB Power Delivery.
The idea with it is that we do not mix any more USB Power
Delivery information into the USB Type-C connectors only.
This separation will make it possible to register USB Power
Delivery devices also from other places, for example from
USB Type-C Bridges (see USB Type-C Bridge Specification).
The device class will not always deal with only the messages
and objects that were negotiated with the partner, but
instead messages and objects that can be used in the
negotiation. That allows the USB PD devices to be shared and
reconfigured. The ports can decide which objects are to be
advertised to the partner before the contract is negotiated.
It is also possible to allow the user space to make that
decision if needed.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220502132058.86236-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some cases the port of an hub needs to be disabled or switched off
and on again. E.g. when the connected device needs to be re-enumerated.
Or it needs to be explicitly disabled while the rest of the usb tree
stays working.
For this purpose this patch adds an sysfs switch to enable/disable the
port on any hub. In the case the hub is supporting power switching, the
power line will be disabled to the connected device.
When the port gets disabled, the associated device gets disconnected and
removed from the logical usb tree. No further device will be enumerated
on that port until the port gets enabled again.
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220607114522.3359148-1-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the AMD platforms have Cypress CCGX PD controller connected
to system I2C i.e designware I2C controller. Added support to enumerate
the CCGX client by adding ACPI ID to the firmware.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Link: https://lore.kernel.org/r/20220526063305.3144352-3-Sanket.Goswami@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation supports only Level trigger with ACTIVE HIGH,
which is overriding level and polarity set by the ACPI table, hence
implement the common utility function to manage irq requests.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Link: https://lore.kernel.org/r/20220526063305.3144352-2-Sanket.Goswami@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Register gadget irq to avoid the interrupt handler is occurred
or scheduled during the unbind flow, may happen when do android
function switch stress test.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220609074233.15532-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In musb_remove() cancel_delayed_work_sync(&musb->irq_work)
is called which flush the irq_work work queue.
After cancel delayed work, musb_remove() call
musb_gadget_cleanup->usb_del_gadget_udc->usb_del_gadget
->usb_gadget_remove_driver->usb_gadget_udc_stop->udc
->gadget->ops->udc_stop(udc->gadget);
Where musb_gadget_stop() call "schedule_delayed_work(&musb->irq_work, 0)”
which is already cancel/flush.
So remove the schedule_delayed_work(&musb->irq_work, 0);
from musb_gadget_stop function.
Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/YqDnxkWZV2KfZh5q@Sauravs-MacBook-Air.local
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Likewise to the uvcvideo hostside driver, this patch is changing the
usb_request message of an non zero completion handler call from dev_info
to dev_warn.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current limitation of possible number of requests being handled is
dependent on the gadget speed. It makes more sense to depend on the
typical frame size when calculating the number of requests. This patch
is changing this and is using the previous limits as boundaries for
reasonable minimum and maximum number of requests.
For a 1080p jpeg encoded video stream with a maximum imagesize of
e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting
number of requests is calculated to 49.
800768 1
nreqs = ------ * -------------- ~= 49
2 (1024 * 8 * 1)
Tested-by: Dan Vacura <w36195@motorola.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-2-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support controller reset via a reset-controller usually in infracfg,
it's different with the software reset by IPPC which only used to reset MAC,
and it will also reset IPPC meanwhile.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220523090449.14430-4-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support controller reset via a reset-controller usually in infracfg,
it's different with the software reset by IPPC which only used to reset MAC,
and it will also reset IPPC meanwhile.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220523090449.14430-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add 'resets' property to support IP reset usually by top pericfg.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220523090449.14430-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add 'resets' property to support IP reset usually by top pericfg.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20220523090449.14430-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-92-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-52-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the function tegra_xusb_powerdomain_init(),
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.
Fixes: 6494a9ad86 ("usb: xhci: tegra: Add genpd support")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220524121404.18376-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_pm_domain_attach_by_name() may return NULL in some cases,
so IS_ERR() doesn't meet the requirements. Thus fix it.
Fixes: 49db427232 ("usb: gadget: Add UDC driver for tegra XUSB device mode controller")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220525135332.23144-1-tangbin@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the VBUS/ID detection interrupts are disabled during system
suspend. So the USB cable connect/disconnect event can't wakeup the
system from low power mode. To allow this, we keep these interrupts
enabled and configure them as wakeup capable. This behavior can be
controlled through device wakeup source policy by the user space.
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1653634146-12215-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code does:
spin_unlock_irq(&udc->ud.lock);
spin_unlock_irqrestore(&udc->lock, flags);
which does not make sense. In theory, the first unlock could enable
IRQs and then the second _irqrestore could disable them again. There
would be a brief momemt where IRQs were enabled improperly.
In real life, however, this function is always called with IRQs enabled
and the bug does not affect runtime.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yo4hVWcZNYzKEkIQ@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It generally doesn't make sense to use _irq() and _irqsave() in the same
function because either some of the callers have disabled IRQs or they
haven't. In this case, the v_recv_cmd_submit() appears to always be
called with IRQs enabled so the code works fine. That means I could
convert it to either _irq() or _irqsave() but I chose to use _irqsave()
because it's more conservative and easier to review.
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Yo4gqLPtHO6XKMLn@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 57303488cd ("usb: dwc3: adapt dwc3 core to use Generic PHY
Framework") added if statements that check 'ret == -ENOSYS || ret ==
-ENODEV', but the function phy_get() which is called by devm_phy_get()
returns the phy driver or -ENODEV if the phy driver was not found. So,
remove the check of -ENOSYS in the if statements.
Signed-off-by: Kushagra Verma <kushagra765@outlook.com>
Link: https://lore.kernel.org/r/HK0PR01MB2801E19D4FE569545BB7592DF8A19@HK0PR01MB2801.apcprd01.prod.exchangelabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When Linux is running under OP-TEE, the SFR is set as secured and thus
the AT91_OHCIICR_USB_SUSPEND register isn't accessible. Add a SMC to
do the appropriate call to suspend the controller.
The SMC id is fetched from the device-tree property
"microchip,suspend-smc-id". if present, then the syscon regmap is not
used to enter suspend and a SMC is issued.
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220607133454.727063-1-clement.leger@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 73108aa90c ("USB: ohci-nxp: Use isp1301 driver")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220603141231.979-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_find_compatible_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 796bcae736 ("USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220602110849.58549-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SoC(e.g NXP imx8MQ) may have a wrong default power down scale
setting so need init it to be the correct value, the power down
scale setting description in DWC3 databook:
Power Down Scale (PwrDnScale)
The USB3 suspend_clk input replaces pipe3_rx_pclk as a clock source to
a small part of the USB3 core that operates when the SS PHY is in its
lowest power (P3) state, and therefore does not provide a clock.
The Power Down Scale field specifies how many suspend_clk periods fit
into a 16 kHz clock period. When performing the division, round up the
remainder.
For example, when using an 8-bit/16-bit/32-bit PHY and 25-MHz Suspend
clock,
Power Down Scale = 25000 kHz/16 kHz = 13'd1563 (rounder up)
So use the suspend clock rate to calculate it.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1654568404-3461-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac
cdns3_wa2_remove_old_request()
{
...
kfree(priv_req->request.buf);
cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
list_del_init(&priv_req->list);
^^^ use after free
...
}
cdns3_gadget_ep_free_request() free the space pointed by priv_req,
but priv_req is used in the following list_del_init().
This patch move list_del_init() before cdns3_gadget_ep_free_request().
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Faqiang Zhu <faqiang.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UVC gadget driver historically uses the
/* Comment
* style
*/
for multi-line block comments, which is frowned upon. Patches for the
driver are required to use the more standard
/*
* Comment
* style
*/
style. This result in inconsistencies. Fix it by converting all
remaining instances of the old style.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20220608174918.14656-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYpz/IQAKCRBZ7Krx/gZQ
666mAPwKOC/voemjl2m+RpSruxAbdlRvKei3IY8YxLfyv+rmUQD9HKLJJtQX2VRF
QTFmQ3p7kx30ydwSbyY8Kpw3VMCDxgs=
=1ZKm
-----END PGP SIGNATURE-----
Merge tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull file descriptor fix from Al Viro:
"Fix for breakage in #work.fd this window"
* tag 'pull-work.fd-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the breakage in close_fd_get_file() calling conventions change
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpz1+QAKCRDdBJ7gKXxA
jrudAP9EvjTg4KhmXDoUpgJYc2oPg27nIhu1LWT8VFdsVQ6mPwEA//HPvPhjah8u
C1M183VxKL9trZf22DBn2BbD3kBDIAo=
=9LgC
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm hotfixes from Andrew Morton:
"Fixups for various recently-added and longer-term issues and a few
minor tweaks:
- fixes for material merged during this merge window
- cc:stable fixes for more longstanding issues
- minor mailmap and MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/oom_kill.c: fix vm_oom_kill_table[] ifdeffery
x86/kexec: fix memory leak of elf header buffer
mm/memremap: fix missing call to untrack_pfn() in pagemap_range()
mm: page_isolation: use compound_nr() correctly in isolate_single_pageblock()
mm: hugetlb_vmemmap: fix CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON
MAINTAINERS: add maintainer information for z3fold
mailmap: update Josh Poimboeuf's email
because,unusually, it has dependencies on both the mm-stable and
mm-nonmm-stable queues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYpz3SAAKCRDdBJ7gKXxA
jou6AP9bY89NifR7Tc8U59Xu4c9amphXS9rTJv7Ysj3GxBMoRwEAuXvvJTet6mEn
UdmytDdb4BtAlx7Itd7IKu4S9JD6mQw=
=bAU1
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull delay-accounting update from Andrew Morton:
"A single featurette for delay accounting.
Delayed a bit because, unusually, it had dependencies on both the
mm-stable and mm-nonmm-stable queues"
* tag 'mm-nonmm-stable-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
delayacct: track delays from write-protect copy
The bluetooth code uses our bitmap infrastructure for the two bits (!)
of connection setup flags, and in the process causes odd problems when
it converts between a bitmap and just the regular values of said bits.
It's completely pointless to do things like bitmap_to_arr32() to convert
a bitmap into a u32. It shoudln't have been a bitmap in the first
place. The reason to use bitmaps is if you have arbitrary number of
bits you want to manage (not two!), or if you rely on the atomicity
guarantees of the bitmap setting and clearing.
The code could use an "atomic_t" and use "atomic_or/andnot()" to set and
clear the bit values, but considering that it then copies the bitmaps
around with "bitmap_to_arr32()" and friends, there clearly cannot be a
lot of atomicity requirements.
So just use a regular integer.
In the process, this avoids the warnings about erroneous use of
bitmap_from_u64() which were triggered on 32-bit architectures when
conversion from a u64 would access two words (and, surprise, surprise,
only one word is needed - and indeed overkill - for a 2-bit bitmap).
That was always problematic, but the compiler seems to notice it and
warn about the invalid pattern only after commit 0a97953fd2 ("lib: add
bitmap_{from,to}_arr64") changed the exact implementation details of
'bitmap_from_u64()', as reported by Sudip Mukherjee and Stephen Rothwell.
Fixes: fe92ee6425 ("Bluetooth: hci_core: Rework hci_conn_params flags")
Link: https://lore.kernel.org/all/YpyJ9qTNHJzz0FHY@debian/
Link: https://lore.kernel.org/all/20220606080631.0c3014f2@canb.auug.org.au/
Link: https://lore.kernel.org/all/20220605162537.1604762-1-yury.norov@gmail.com/
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It used to grab an extra reference to struct file rather than
just transferring to caller the one it had removed from descriptor
table. New variant doesn't, and callers need to be adjusted.
Reported-and-tested-by: syzbot+47dd250f527cb7bebf24@syzkaller.appspotmail.com
Fixes: 6319194ec5 ("Unify the primitives for file descriptor closing")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
SGX enclave is accounted to the wrong memory control group.
-----BEGIN PGP SIGNATURE-----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=cuLD
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SGX fix from Thomas Gleixner:
"A single fix for x86/SGX to prevent that memory which is allocated for
an SGX enclave is accounted to the wrong memory control group"
* tag 'x86-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Set active memcg prior to shmem allocation
-----BEGIN PGP SIGNATURE-----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=KN22
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm cleanup from Thomas Gleixner:
"Use PAGE_ALIGNED() instead of open coding it in the x86/mm code"
* tag 'x86-mm-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Use PAGE_ALIGNED(x) instead of IS_ALIGNED(x, PAGE_SIZE)
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
-----BEGIN PGP SIGNATURE-----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=DQjr
-----END PGP SIGNATURE-----
Merge tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode updates from Thomas Gleixner:
- Disable late microcode loading by default. Unless the HW people get
their act together and provide a required minimum version in the
microcode header for making a halfways informed decision its just
lottery and broken.
- Warn and taint the kernel when microcode is loaded late
- Remove the old unused microcode loader interface
- Remove a redundant perf callback from the microcode loader
* tag 'x86-microcode-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Remove unnecessary perf callback
x86/microcode: Taint and warn on late loading
x86/microcode: Default-disable late loading
x86/microcode: Rip out the OLD_INTERFACE
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to fix
one at a time.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKcdUsTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYofu/EACJEYM67sgOGX/OPxSI2QrcqIPajI/u
EMrNi69jR8XBgFUwnYRLC+eoC7nvYdpTaUHzQklS2xhE8lcZ4PcMejy9nHECe8MI
sYA38gXeGamM4pzFQgpsX0Eoq1OX3iH165dCnSgRfGg2Zv6YovmcGk2fkHtA0fXn
Sqp5fy33wK2U+ghY5MrJwVQ2SshbDp4p7SJ80iLCfdHvtKzQi02EH4CjrZ/guoJL
bjdiWXA+eIDrPXhoPiBkFQ3cG/vHPc/oj2SEAnBV5oC+hdgjFebiz6CNYbFw0QI9
MnJQlvhu/oe66J6sRGfqPABm4yh4omNSbjNjbWr9ahoVPvprH9gJ2EMBx6qOT3pe
sG6pluiQAZXBoOpRqR45vws4Ypq5onyv4OwMzEFNZVT9kzr1qrMJtsXIlffM/hHE
zgygCV1nqWznUueZKcI6XkXVtawte9wfpujDuZhCgoD/UaIixulW8zpK/0h9iUI5
03u0lXse20h7kEmJYZ+vgQwSci/6i10U1X7+VngIrBAt24gtzigdKd6FLljSPp0y
GOc9c79qNdm0Ayofko/m+XtwXw8UJ2Pbtkvku8qmyUR3ffUlBD+qcTPIZ6TZ8aPb
w17k64zxEMQRYlMm8uHRg8KVJXuWD8nO3BSzwpwPVyckpsL4CkEcgdij7HMN7dLO
+GCpzbvafupD6Q==
=vSDr
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"A set of small x86 cleanups:
- Remove unused headers in the IDT code
- Kconfig indendation and comment fixes
- Fix all 'the the' typos in one go instead of waiting for bots to
fix one at a time"
* tag 'x86-cleanups-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Fix all occurences of the "the the" typo
x86/idt: Remove unused headers
x86/Kconfig: Fix indentation of arch/x86/Kconfig.debug
x86/Kconfig: Fix indentation and add endif comments to arch/x86/Kconfig
-----BEGIN PGP SIGNATURE-----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=gNpf
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot update from Thomas Gleixner:
"Use strlcpy() instead of strscpy() in arch_setup()"
* tag 'x86-boot-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/setup: Use strscpy() to replace deprecated strlcpy()
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
-----BEGIN PGP SIGNATURE-----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=fIlH
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clockevent/clocksource updates from Thomas Gleixner:
- Device tree bindings for MT8186
- Tell the kernel that the RISC-V SBI timer stops in deeper power
states
- Make device tree parsing in sp804 more robust
- Dead code removal and tiny fixes here and there
- Add the missing SPDX identifiers
* tag 'timers-core-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/oxnas-rps: Fix irq_of_parse_and_map() return value
clocksource/drivers/timer-ti-dm: Remove unnecessary NULL check
clocksource/drivers/timer-sun5i: Convert to SPDX identifier
clocksource/drivers/timer-sun4i: Convert to SPDX identifier
clocksource/drivers/pistachio: Convert to SPDX identifier
clocksource/drivers/orion: Convert to SPDX identifier
clocksource/drivers/lpc32xx: Convert to SPDX identifier
clocksource/drivers/digicolor: Convert to SPDX identifier
clocksource/drivers/armada-370-xp: Convert to SPDX identifier
clocksource/drivers/mips-gic-timer: Convert to SPDX identifier
clocksource/drivers/jcore: Convert to SPDX identifier
clocksource/drivers/bcm_kona: Convert to SPDX identifier
clocksource/drivers/sp804: Avoid error on multiple instances
clocksource/drivers/riscv: Events are stopped during CPU suspend
clocksource/drivers/ixp4xx: Drop boardfile probe path
dt-bindings: timer: Add compatible for Mediatek MT8186
-----BEGIN PGP SIGNATURE-----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=arj3
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"Fix the fallout of sysctl code move which placed the init function
wrong"
* tag 'sched-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/autogroup: Fix sysctl move
- Make the ICL event constraints match reality
- Remove a unused local variable
-----BEGIN PGP SIGNATURE-----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=ZK+2
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
- Make the ICL event constraints match reality
- Remove a unused local variable
* tag 'perf-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Remove unused local variable
perf/x86/intel: Fix event constraints for ICL
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn.
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent escape
from non-instrumentable regions.
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions.
- Mark a few tiny inline as __always_inline to prevent GCC from bringing
them out of line and instrumenting them.
- Mark the empty stub context_tracking_enabled() as always inline as GCC
brings them out of line and instruments the empty shell.
- Annotate ex_handler_msr_mce() as dead end
-----BEGIN PGP SIGNATURE-----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=eNVp
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Thomas Gleixner:
- Handle __ubsan_handle_builtin_unreachable() correctly and treat it as
noreturn
- Allow architectures to select uaccess validation
- Use the non-instrumented bit test for test_cpu_has() to prevent
escape from non-instrumentable regions
- Use arch_ prefixed atomics for JUMP_LABEL=n builds to prevent escape
from non-instrumentable regions
- Mark a few tiny inline as __always_inline to prevent GCC from
bringing them out of line and instrumenting them
- Mark the empty stub context_tracking_enabled() as always inline as
GCC brings them out of line and instruments the empty shell
- Annotate ex_handler_msr_mce() as dead end
* tag 'objtool-urgent-2022-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/extable: Annotate ex_handler_msr_mce() as a dead end
context_tracking: Always inline empty stubs
x86: Always inline on_thread_stack() and current_top_of_stack()
jump_label,noinstr: Avoid instrumentation for JUMP_LABEL=n builds
x86/cpu: Elide KCSAN for cpu_has() and friends
objtool: Mark __ubsan_handle_builtin_unreachable() as noreturn
objtool: Add CONFIG_HAVE_UACCESS_VALIDATION
Mostly small bug fixes plus other trivial updates. The major change
of note is moving ufs out of scsi and a minor update to lpfc vmid
handling.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYptvayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishb1rAPwJWSl1
kB9Qt1xPa1JK0Z7To2LRkrQ4uxYbAnpTLEP6UgEA3YuBccXRppcYQe5CXCrcZryz
BtTbtI3ApiV40xC/SRk=
=Uit3
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes plus other trivial updates.
The major change of note is moving ufs out of scsi and a minor update
to lpfc vmid handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: qla2xxx: Remove unused 'ql_dm_tgt_ex_pct' parameter
scsi: qla2xxx: Remove setting of 'req' and 'rsp' parameters
scsi: mpi3mr: Fix kernel-doc
scsi: lpfc: Add support for ATTO Fibre Channel devices
scsi: core: Return BLK_STS_TRANSPORT for ALUA transitioning
scsi: sd_zbc: Prevent zone information memory leak
scsi: sd: Fix potential NULL pointer dereference
scsi: mpi3mr: Rework mrioc->bsg_device model to fix warnings
scsi: myrb: Fix up null pointer access on myrb_cleanup()
scsi: core: Unexport scsi_bus_type
scsi: sd: Don't call blk_cleanup_disk() in sd_probe()
scsi: ufs: ufshcd: Delete unnecessary NULL check
scsi: isci: Fix typo in comment
scsi: pmcraid: Fix typo in comment
scsi: smartpqi: Fix typo in comment
scsi: qedf: Fix typo in comment
scsi: esas2r: Fix typo in comment
scsi: storvsc: Fix typo in comment
scsi: ufs: Split the drivers/scsi/ufs directory
scsi: qla1280: Remove redundant variable
...
This contains the new HTE subsystem that has been in the works for a
couple of months now. The infrastructure provided allows for drivers to
register as hardware timestamp providers, while consumers will be able
to request events that they are interested in (such as GPIOs and IRQs)
to be timestamped by the hardware providers.
Note that this currently supports only one provider, but there seems to
be enough interest in this functionality and we expect to see more
drivers added once this is merged.
-----BEGIN PGP SIGNATURE-----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=sOJn
-----END PGP SIGNATURE-----
Merge tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamping subsystem from Thierry Reding:
"This contains the new HTE (hardware timestamping engine) subsystem
that has been in the works for a couple of months now.
The infrastructure provided allows for drivers to register as hardware
timestamp providers, while consumers will be able to request events
that they are interested in (such as GPIOs and IRQs) to be timestamped
by the hardware providers.
Note that this currently supports only one provider, but there seems
to be enough interest in this functionality and we expect to see more
drivers added once this is merged"
[ Linus Walleij mentions the Intel PMC in the Elkhart and Tiger Lake
platforms as another future timestamp provider ]
* tag 'hte/for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: timestamp: Correct id path
dt-bindings: Renamed hte directory to timestamp
hte: Uninitialized variable in hte_ts_get()
hte: Fix off by one in hte_push_ts_ns()
hte: Fix possible use-after-free in tegra_hte_test_remove()
hte: Remove unused including <linux/version.h>
MAINTAINERS: Add HTE Subsystem
hte: Add Tegra HTE test driver
tools: gpio: Add new hardware clock type
gpiolib: cdev: Add hardware timestamp clock type
gpio: tegra186: Add HTE support
gpiolib: Add HTE support
dt-bindings: Add HTE bindings
hte: Add Tegra194 HTE kernel provider
drivers: Add hardware timestamp engine (HTE) subsystem
Documentation: Add HTE subsystem guide
