Moving an iterator of the macros inside conditional part of for-loop
helps to generate a better code. It had been first implemented in commit
7baac8b91f ("cpumask: make for_each_cpu_mask a bit smaller").
Now that cpumask for-loops are the aliases to bitmap loops, it's worth
to optimize them the same way.
Bloat-o-meter says:
add/remove: 8/12 grow/shrink: 147/592 up/down: 4876/-24416 (-19540)
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add for_each_set_bit_wrap() macro and use it in for_each_cpu_wrap(). The
new macro is based on __for_each_wrap() iterator, which is simpler and
smaller than cpumask_next_wrap().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The helper is better optimized for the worst case: in case of empty
cpumask, current code traverses 2 * size:
next = cpumask_next_and(prev, src1p, src2p);
if (next >= nr_cpu_ids)
next = cpumask_first_and(src1p, src2p);
At bitmap level we can stop earlier after checking 'size + offset' bits.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The difference between for_each_cpu() and for_each_set_bit()
is that the latter uses cpumask_next() instead of find_next_bit(),
and so calls cpumask_check().
This check is useless because the iterator value is not provided by
user. It generates false-positives for the very last iteration
of for_each_cpu().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The functions require to be passed with a cpu index prior to one that is
the first to start search, so the valid input range is [-1, nr_cpu_ids-1).
However, the code checks against [-1, nr_cpu_ids).
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add cpumask_nth_{,and,andnot} as wrappers around corresponding
find functions, and use it in cpumask_local_spread().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Kernel lacks for a function that searches for Nth bit in a bitmap.
Usually people do it like this:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
We can do it more efficiently, if we:
1. find a word containing Nth bit, using hweight(); and
2. find the bit, using a helper fns(), that works similarly to
__ffs() and ffz().
fns() is implemented as a simple loop. For x86_64, there's PDEP instruction
to do that: ret = clz(pdep(1 << idx, num)). However, for large bitmaps the
most of improvement comes from using hweight(), so I kept fns() simple.
New find_nth_bit() is ~70 times faster on x86_64/kvm in find_bit benchmark:
find_nth_bit: 7154190 ns, 16411 iterations
for_each_bit: 505493126 ns, 16315 iterations
With all that, a family of 3 new functions is added, and used where
appropriate in the following patches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The function calculates Hamming weight of (bitmap1 & bitmap2). Now we
have to do like this:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
This requires additional memory, adds pressure on alloc subsystem, and
way less cache-friendly than just:
weight = bitmap_weight_and(map1, map2, nbits);
The following patches apply it for cpumask functions.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
__bitmap_weight() is not to be used directly in the kernel code because
it's a helper for bitmap_weight(). Switch everything to bitmap_weight().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Sync find_first_bit() and find_next_bit() implementation with the
mother kernel.
Also, drop unused find_last_bit() and find_next_clump8().
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Over the past couple years, the function _find_next_bit() was extended
with parameters that modify its behavior to implement and- zero- and le-
flavors. The parameters are passed at compile time, but current design
prevents a compiler from optimizing out the conditionals.
As find_next_bit() API grows, I expect that more parameters will be added.
Current design would require more conditional code in _find_next_bit(),
which would bloat the helper even more and make it barely readable.
This patch replaces _find_next_bit() with a macro FIND_NEXT_BIT, and adds
a set of wrappers, so that the compile-time optimizations become possible.
The common logic is moved to the new macro, and all flavors may be
generated by providing a FETCH macro parameter, like in this example:
#define FIND_NEXT_BIT(FETCH, MUNGE, size, start) ...
find_next_xornot_and_bit(addr1, addr2, addr3, size, start)
{
return FIND_NEXT_BIT(addr1[idx] ^ ~addr2[idx] & addr3[idx],
/* nop */, size, start);
}
The FETCH may be of any complexity, as soon as it only refers the bitmap(s)
and an iterator idx.
MUNGE is here to support _le code generation for BE builds. May be
empty.
I ran find_bit_benchmark 16 times on top of 6.0-rc2 and 16 times on top
of 6.0-rc2 + this series. The results for kvm/x86_64 are:
v6.0-rc2 Optimized Difference Z-score
Random dense bitmap ns ns ns %
find_next_bit: 787735 670546 117189 14.9 3.97
find_next_zero_bit: 777492 664208 113284 14.6 10.51
find_last_bit: 830925 687573 143352 17.3 2.35
find_first_bit: 3874366 3306635 567731 14.7 1.84
find_first_and_bit: 40677125 37739887 2937238 7.2 1.36
find_next_and_bit: 347865 304456 43409 12.5 1.35
Random sparse bitmap
find_next_bit: 19816 14021 5795 29.2 6.10
find_next_zero_bit: 1318901 1223794 95107 7.2 1.41
find_last_bit: 14573 13514 1059 7.3 6.92
find_first_bit: 1313321 1249024 64297 4.9 1.53
find_first_and_bit: 8921 8098 823 9.2 4.56
find_next_and_bit: 9796 7176 2620 26.7 5.39
Where the statistics is significant (z-score > 3), the improvement
is ~15%.
According to the bloat-o-meter, the Image size is 10-11K less:
x86_64/defconfig:
add/remove: 32/14 grow/shrink: 61/782 up/down: 6344/-16521 (-10177)
arm64/defconfig:
add/remove: 3/2 grow/shrink: 50/714 up/down: 608/-11556 (-10948)
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
find_first_zero_bit_le() is an alias to find_next_zero_bit_le(),
despite that 'next' is known to be slower than 'first' version.
Now that we have common FIND_FIRST_BIT() macro helper, it's trivial
to implement find_first_zero_bit_le() as a real function.
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Now that we have many flavors of find_first_bit(), and expect even more,
it's better to have one macro that generates optimal code for all and makes
maintaining of slightly different functions simpler.
The logic common to all versions is moved to the new macro, and all the
flavors are generated by providing an FETCH macro-parameter, like
in this example:
#define FIND_FIRST_BIT(FETCH, MUNGE, size) ...
find_first_ornot_and_bit(addr1, addr2, addr3, size)
{
return FIND_FIRST_BIT(addr1[idx] | ~addr2[idx] & addr3[idx], /* nop */, size);
}
The FETCH may be of any complexity, as soon as it only refers
the bitmap(s) and an iterator idx.
MUNGE is here to support _le code generation for BE builds. May be
empty.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The size of cpumasks is hard-limited by compile-time parameter NR_CPUS,
but defined at boot-time when kernel parses ACPI/DT tables, and stored in
nr_cpu_ids. In many practical cases, number of CPUs for a target is known
at compile time, and can be provided with NR_CPUS.
In that case, compiler may be instructed to rely on NR_CPUS as on actual
number of CPUs, not an upper limit. It allows to optimize many cpumask
routines and significantly shrink size of the kernel image.
This patch adds FORCE_NR_CPUS option to teach the compiler to rely on
NR_CPUS and enable corresponding optimizations.
If FORCE_NR_CPUS=y, kernel will not set nr_cpu_ids at boot, but only check
that the actual number of possible CPUs is equal to NR_CPUS, and WARN if
that doesn't hold.
The new option is especially useful in embedded applications because
kernel configurations are unique for each SoC, the number of CPUs is
constant and known well, and memory limitations are typically harder.
For my 4-CPU ARM64 build with NR_CPUS=4, FORCE_NR_CPUS=y saves 46KB:
add/remove: 3/4 grow/shrink: 46/729 up/down: 652/-46952 (-46300)
Signed-off-by: Yury Norov <yury.norov@gmail.com>
generic_secondary_common_init() calls LOAD_REG_ADDR(r7, nr_cpu_ids)
conditionally on CONFIG_SMP. However, if 'NR_CPUS == 1', kernel doesn't
use the nr_cpu_ids, and in C code, it's just:
#if NR_CPUS == 1
#define nr_cpu_ids
...
This series makes declaration of nr_cpu_ids conditional on NR_CPUS == 1,
and that reveals the issue, because compiler can't link the
LOAD_REG_ADDR(r7, nr_cpu_ids) against nonexisting symbol.
Current code looks unsafe for those who build kernel with CONFIG_SMP=y and
NR_CPUS == 1. This is weird configuration, but not disallowed.
Fix the linker error by replacing LOAD_REG_ADDR() with LOAD_REG_IMMEDIATE()
conditionally on NR_CPUS == 1.
As the following patch adds CONFIG_FORCE_NR_CPUS option that has the
similar effect on nr_cpu_ids, make the generic_secondary_common_init()
conditional on it too.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cpumask code is written in assumption that when CONFIG_CPUMASK_OFFSTACK
is enabled, all cpumasks have boot-time defined size, otherwise the size
is always NR_CPUS.
The latter is wrong because the number of possible cpus is always
calculated on boot, and it may be less than NR_CPUS.
On my 4-cpu arm64 VM the nr_cpu_ids is 4, as expected, and nr_cpumask_bits
is 256, which corresponds to NR_CPUS. This not only leads to useless
traversing of cpumask bits greater than 4, this also makes some cpumask
routines fail.
For example, cpumask_full(0b1111000..000) would erroneously return false
in the example above because tail bits in the mask are all unset.
This patch deprecates nr_cpumask_bits and wires it to nr_cpu_ids
unconditionally, so that cpumask routines will not waste time traversing
unused part of cpu masks. It also fixes cpumask_full() and similar
routines.
As a side effect, because now a length of cpumasks is defined at run-time
even if CPUMASK_OFFSTACK is disabled, compiler can't optimize corresponding
functions.
It increases kernel size by ~2.5KB if OFFSTACK is off. This is addressed in
the following patch.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The comment says that HOTPLUG config option enables all cpus in
cpu_possible_mask up to NR_CPUs. This is wrong. Even if HOTPLUG is
enabled, the mask is populated on boot with respect to ACPI/DT records.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
In preparation to support compile-time nr_cpu_ids, add a setter for
the variable.
This is a no-op for all arches.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
SMP and NR_CPUS are independent options, hence nr_cpu_ids may be
declared even if NR_CPUS == 1, which is useless.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
- Fix handling of PCI domains in /proc on 32-bit systems using the recently added support
for numbering buses from zero for each domain.
- A fix and a revert for some changes to use READ/WRITE_ONCE() which caused problems with
KASAN enabled due to sanitisation calls being introduced in low-level paths that can't
cope with it.
- Fix build errors on 32-bit caused by the syscall table being misaligned sometimes.
- Two fixes to get IBM Cell native machines booting again, which had bit-rotted while my
QS22 was temporarily out of action.
- Fix the papr_scm driver to not assume the order of events returned by the hypervisor is
stable, and a related compile fix.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain, Masahiro Yamada,
Nathan Chancellor, Pali Rohár, Vaibhav Jain, Zhouyi Zhou.
-----BEGIN PGP SIGNATURE-----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=3cQx
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix handling of PCI domains in /proc on 32-bit systems using the
recently added support for numbering buses from zero for each domain.
- A fix and a revert for some changes to use READ/WRITE_ONCE() which
caused problems with KASAN enabled due to sanitisation calls being
introduced in low-level paths that can't cope with it.
- Fix build errors on 32-bit caused by the syscall table being
misaligned sometimes.
- Two fixes to get IBM Cell native machines booting again, which had
bit-rotted while my QS22 was temporarily out of action.
- Fix the papr_scm driver to not assume the order of events returned by
the hypervisor is stable, and a related compile fix.
Thanks to Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain,
Masahiro Yamada, Nathan Chancellor, Pali Rohár, Vaibhav Jain, and Zhouyi
Zhou.
* tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register()
Revert "powerpc/irq: Don't open code irq_soft_mask helpers"
powerpc: Fix hard_irq_disable() with sanitizer
powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"
powerpc: align syscall table for ppc32
powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique
powerpc/papr_scm: Fix nvdimm event mappings
-Wformat was recently re-enabled for builds with clang, then quickly
re-disabled, due to concerns stemming from the frequency of default
argument promotion related warning instances.
commit 258fafcd06 ("Makefile.extrawarn: re-enable -Wformat for clang")
commit 21f9c8a13b ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"")
ISO WG14 has ratified N2562 to address default argument promotion
explicitly for printf, as part of the upcoming ISO C2X standard.
The behavior of clang was changed in clang-16 to not warn for the cited
cases in all language modes.
Add a version check, so that users of clang-16 now get the full effect
of -Wformat. For older clang versions, re-enable flags under the
-Wformat group that way users still get some useful checks related to
format strings, without noisy default argument promotion warnings. I
intentionally omitted -Wformat-y2k and -Wformat-security from being
re-enabled, which are also part of -Wformat in clang-16.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://github.com/llvm/llvm-project/issues/57102
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdf
Suggested-by: Justin Stitt <jstitt007@gmail.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- MAINTAINERS update
- fix resource leaks in gpio-mockup and gpio-pxa
- add missing locking in gpio-pca953x
- use 32-bit I/O in gpio-realtek-otto
- make irq_chip structures immutable in four more drivers
-----BEGIN PGP SIGNATURE-----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=VkA4
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A a set of fixes from the GPIO subsystem.
Most are small driver fixes except the realtek-otto driver patch which
is pretty big but addresses a significant flaw that can cause the CPU
to stay infinitely busy on uncleared ISR on some platforms.
Summary:
- MAINTAINERS update
- fix resource leaks in gpio-mockup and gpio-pxa
- add missing locking in gpio-pca953x
- use 32-bit I/O in gpio-realtek-otto
- make irq_chip structures immutable in four more drivers"
* tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: ws16c48: Make irq_chip immutable
gpio: 104-idio-16: Make irq_chip immutable
gpio: 104-idi-48: Make irq_chip immutable
gpio: 104-dio-48e: Make irq_chip immutable
gpio: realtek-otto: switch to 32-bit I/O
gpio: pca953x: Add mutex_lock for regcache sync in PM
gpio: mockup: remove gpio debugfs when remove device
gpio: pxa: use devres for the clock struct
MAINTAINERS: rectify entry for XILINX GPIO DRIVER
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Kernel warns about mutable irq_chips:
"not an immutable chip, please consider fixing!"
Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYxNpQQAKCRCAXGG7T9hj
vgO9AQChV9kknjgoL9qWJe25nNHyQ4zNfgtUNLefamYOAr93HgEAiFv7SIwMshFb
jl4oceI76z2u6APkZlySR2JcJa+B+go=
=BtBW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a minor fix for the Xen grant driver
- a small series fixing a recently introduced problem in the Xen
blkfront/blkback drivers with negotiation of feature usage
* tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
xen-blkfront: Cache feature_persistent value before advertisement
xen-blkfront: Advertise feature-persistent as user requested
xen-blkback: Advertise feature-persistent as user requested
- GT1158 ID added to Goodix touchscreen driver
- Boeder Force Feedback Wheel USB added to iforce joystick driver
- fixup for iforce driver to avoid hangups
- fix autoloading of rk805-pwrkey driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCYxOy5gAKCRBAj56VGEWX
nHe9AQDPTQk4YTBis6QJ6eVd/qnwiBiitKXkmQAKFliJFxrYAQEAs/ykRS3O0DPx
ptGEH2IGnjKSdtVBbfEMUllo52XohQQ=
=t3iB
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- GT1158 ID added to Goodix touchscreen driver
- Boeder Force Feedback Wheel USB added to iforce joystick driver
- fixup for iforce driver to avoid hangups
- fix autoloading of rk805-pwrkey driver.
* tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add support for Boeder Force Feedback Wheel
Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
Input: goodix - add compatible string for GT1158
MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS
Input: rk805-pwrkey - fix module autoloading
Input: goodix - add support for GT1158
dt-bindings: input: touchscreen: add compatible string for Goodix GT1158
Here are some small tty/serial/vt driver fixes for 6.0-rc4 that resolve
a number of reported issues:
- n_gsm fixups for previous changes that caused problems
- much-reported serdev crash fix that showed up in 6.0-rc1
- vt font selection bugfix
- kerneldoc build warning fixes
- other tiny serial core fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxL+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykpugCfdekXPy61pZbfme6hrdnJ6cu7DzQAn3DNqhNU
DWpSYr7To0W8qReR2kB1
=yhvz
-----END PGP SIGNATURE-----
Merge tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial/vt driver fixes for 6.0-rc4 that
resolve a number of reported issues:
- n_gsm fixups for previous changes that caused problems
- much-reported serdev crash fix that showed up in 6.0-rc1
- vt font selection bugfix
- kerneldoc build warning fixes
- other tiny serial core fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: n_gsm: avoid call of sleeping functions from atomic context
tty: n_gsm: replace kicktimer with delayed_work
tty: n_gsm: initialize more members at gsm_alloc_mux()
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
tty: serial: atmel: Preserve previous USART mode if RS485 disabled
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
tty: Fix lookahead_buf crash with serdev
serial: fsl_lpuart: RS485 RTS polariy is inverse
vt: Clear selection before changing the font
serial: document start_rx member at struct uart_ops
Here are 3 small staging driver fixes for 6.0-rc4 that resolve some
reported problems and add some a device id:
- new device id for r8188eu driver
- use-after-free bugfixes for the rtl8712 driver
- fix up firmware dependency problem for the r8188eu driver
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYxL1Hg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylUDwCfdWyJ+j/loV2ngDJZjT2nTPEkDcMAn1FlWFEZ
jQvtgnjZUf4h0CLRteFU
=oF2R
-----END PGP SIGNATURE-----
Merge tag 'staging-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are three small staging driver fixes for 6.0-rc4 that resolve
some reported problems and add some a device id:
- new device id for r8188eu driver
- use-after-free bugfixes for the rtl8712 driver
- fix up firmware dependency problem for the r8188eu driver
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8712: fix use after free bugs
staging: r8188eu: Add Rosewill USB-N150 Nano to device tables
staging: r8188eu: add firmware dependency
to the core framework. We had to revert out a commit that affected boot
on some devices that have the CLK_OPS_PARENT_ENABLE flag set. It isn't
critical to have that fix so we'll try again next time.
Driver side fixes include:
- Plug an of node refcount bug in the TI clk driver
- Fix the error handling in the raspberry pi firmware get_rate
so that errors don't look like valid frequencies
- Avoid going out of bounds in the raspberry pi driver too if the
video firmware returns something we're not expecting
-----BEGIN PGP SIGNATURE-----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=2LvU
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Here's a collection of primarily clk driver fixes, with a couple fixes
to the core framework.
We had to revert out a commit that affected boot on some devices that
have the CLK_OPS_PARENT_ENABLE flag set. It isn't critical to have
that fix so we'll try again next time.
Driver side fixes include:
- Plug an OF-node refcount bug in the TI clk driver
- Fix the error handling in the raspberry pi firmware get_rate so
that errors don't look like valid frequencies
- Avoid going out of bounds in the raspberry pi driver too if the
video firmware returns something we're not expecting"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops"
clk: bcm: rpi: Show clock id limit in error case
clk: bcm: rpi: Add missing newline
clk: bcm: rpi: Prevent out-of-bounds access
clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate
clk: core: Fix runtime PM sequence in clk_core_unprepare()
clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops
clk: ti: Fix missing of_node_get() ti_find_clock_provider()
The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.
For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.
For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.
This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return the value pa_to_nid() directly instead of storing it in another
redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kernel build error when unslected CONFIG_MEMORY_HOTREMOVE because
arch_remove_memory() is needed by mm/memory_hotplug.c but undefined.
Some build error messages like:
LD vmlinux.o
MODPOST vmlinux.symvers
MODINFO modules.builtin.modinfo
GEN modules.builtin
LD .tmp_vmlinux.kallsyms1
loongarch64-linux-gnu-ld: mm/memory_hotplug.o: in function `.L242':
memory_hotplug.c:(.ref.text+0x930): undefined reference to `arch_remove_memory'
make: *** [Makefile:1169：vmlinux] 错误 1
Removed CONFIG_MEMORY_HOTREMOVE requirement and rearrange the file refer
to the definitions of other platform architectures.
Signed-off-by: Yupeng Li <liyupeng@zbhlos.com>
Signed-off-by: Caicai <caizp2008@163.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now acpi_os_ioremap() is marked with __init because it calls memblock_
is_memory() which is also marked with __init in the !ARCH_KEEP_MEMBLOCK
case. However, acpi_os_ioremap() is called by ordinary functions such
as acpi_os_{read, write}_memory() and causes section mismatch warnings:
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_read_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
WARNING: modpost: vmlinux.o: section mismatch in reference: acpi_os_write_memory (section: .text) -> acpi_os_ioremap (section: .init.text)
Fix these warnings by selecting ARCH_KEEP_MEMBLOCK unconditionally and
removing the __init modifier of acpi_os_ioremap(). This can also give a
chance to track "memory" and "reserved" memblocks after early boot.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Commit 8ba62d3794 ("task_work: Call tracehook_notify_signal from
get_signal on all architectures") adjust arch_do_signal_or_restart() for
all architectures. LoongArch hasn't been upstream yet at that time and
can be still built successfully without adjustment because this function
has a weak version with the correct prototype. It is obviously that we
should convert LoongArch to use new API, otherwise some signal handlings
will be lost.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Ensure that all input sections are listed explicitly in the linker
script, and issue a warning otherwise. This ensures that the binary
image matches the PE/COFF and other image metadata exactly, which is
important for things like code signing.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
-----BEGIN PGP SIGNATURE-----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=yXSa
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- A single fix for over-eager retries for networking (Pavel)
- Revert the notification slot support for zerocopy sends.
It turns out that even after more than a year or development and
testing, there's not full agreement on whether just using plain
ordered notifications is Good Enough to avoid the complexity of using
the notifications slots. Because of that, we decided that it's best
left to a future final decision.
We can always bring back this feature, but we can't really change it
or remove it once we've released 6.0 with it enabled. The reverts
leave the usual CQE notifications as the primary interface for
knowing when data was sent, and when it was acked. (Pavel)
* tag 'io_uring-6.0-2022-09-02' of git://git.kernel.dk/linux-block:
selftests/net: return back io_uring zc send tests
io_uring/net: simplify zerocopy send user API
io_uring/notif: remove notif registration
Revert "io_uring: rename IORING_OP_FILES_UPDATE"
Revert "io_uring: add zc notification flush requests"
selftests/net: temporarily disable io_uring zc test
io_uring/net: fix overexcessive retries
-----BEGIN PGP SIGNATURE-----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=gRo4
-----END PGP SIGNATURE-----
Merge tag '6.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Five fixes, all also marked for stable:
- fixes for collapse range and insert range (also fixes xfstest
generic/031)
- memory leak fix"
* tag '6.0-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix small mempool leak in SMB2_negotiate()
smb3: use filemap_write_and_wait_range instead of filemap_write_and_wait
smb3: fix temporary data corruption in insert range
smb3: fix temporary data corruption in collapse range
smb3: Move the flush out of smb2_copychunk_range() into its callers
