Add cmdq commands for setting queue pair contexts in the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the completion event queues and handle ceq events by calling
the registered handlers. Used for cmdq command completion.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create the work queues for cmdq and update the nic about the work queue
contexts. cmdq commands are used for updating the nic about the qp
contexts.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the nic about the resources of the queue pairs.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create the resources for queue pair operations: doorbell area,
consumer index address and producer index address.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create work queues for being used by the queue pairs.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create the logical queues of the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add port management message for setting Rx mode in the card,
used for rx_mode netdev operation.
The link event handler is used for getting a notification about the
link state.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the port management commands that are sent as management messages.
The port management commands are used for netdev operations.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle aeq elements that are accumulated on the aeq by calling the
registered handler for the specific event.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the api cmd commands for sending management messages to the nic.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the management messages for sending to api cmd and the asynchronous
event handler for the completion of the messages.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the hardware about api cmd resources and initialize it.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize api cmd resources as part of management initialization.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize hw device by calling the initialization functions of aeqs and
management channel.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize hw interface as part of the nic initialization for accessing hw.
Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It only supports rmii interface. Add constants and callback functions
for the dwmac on rv1108 socs. As can be seen, the base structure is
the same, only registers and the bits in them moved slightly.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The get_options() function takes the whole ARRAY_SIZE(). It doesn't
matter here because we don't use more than 7 elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The JIT compiler emits ARM 32 bit instructions. Currently, It supports
eBPF only. Classic BPF is supported because of the conversion by BPF core.
This patch is essentially changing the current implementation of JIT compiler
of Berkeley Packet Filter from classic to internal with almost all
instructions from eBPF ISA supported except the following
BPF_ALU64 | BPF_DIV | BPF_K
BPF_ALU64 | BPF_DIV | BPF_X
BPF_ALU64 | BPF_MOD | BPF_K
BPF_ALU64 | BPF_MOD | BPF_X
BPF_STX | BPF_XADD | BPF_W
BPF_STX | BPF_XADD | BPF_DW
Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit
ARM because of deficiency of general purpose registers on ARM. Currently,
only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler.
Tested on ARMv7 with QEMU by me (Shubham Bansal).
Testing results on ARMv7:
1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed]
2) test_tag: OK (40945 tests)
3) test_progs: Summary: 30 PASSED, 0 FAILED
4) test_lpm: OK
5) test_lru_map: OK
Above tests are all done with following flags enabled discreatly.
1) bpf_jit_enable=1
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
2) bpf_jit_enable=1 and bpf_jit_harden=2
a) CONFIG_FRAME_POINTER enabled
b) CONFIG_FRAME_POINTER disabled
See Documentation/networking/filter.txt for more information.
Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull sparc fixes from David Miller:
"Just a couple small fixes, two of which have to do with gcc-7:
1) Don't clobber kernel fixed registers in __multi4 libgcc helper.
2) Fix a new uninitialized variable warning on sparc32 with gcc-7,
from Thomas Petazzoni.
3) Adjust pmd_t initializer on sparc32 to make gcc happy.
4) If ATU isn't available, don't bark in the logs. From Tushar Dave"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus()
sparc64: remove unnecessary log message
sparc64: Don't clibber fixed registers in __multi4.
mm: add pmd_t initializer __pmd() to work around a GCC bug.
When building the kernel for Sparc using gcc 7.x, the build fails
with:
arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’:
arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
cmd |= PCI_COMMAND_IO;
^~
The simplified code looks like this:
unsigned int cmd;
[...]
pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd);
[...]
cmd |= PCI_COMMAND_IO;
I.e, the code assumes that pcic_read_config() will always initialize
cmd. But it's not the case. Looking at pcic_read_config(), if
bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will
not be initialized.
As a simple fix, we initialize cmd to zero at the beginning of
pcibios_fixup_bus.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the invalid handle "0" check to avoid unnecessary search, because
the qdisc uses the skb->priority as the handle value to look up, and
it is "0" usually.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the broadcast send link after 100 attempts has failed to
transfer a packet to all peers, we consider it stale, and reset
it. Thereafter it needs to re-synchronize with the peers, something
currently done by just resetting and re-establishing all links to
all peers. This has turned out to be overkill, with potentially
unwanted consequences for the remaining cluster.
A closer analysis reveals that this can be done much simpler. When
this kind of failure happens, for reasons that may lie outside the
TIPC protocol, it is typically only one peer which is failing to
receive and acknowledge packets. It is hence sufficient to identify
and reset the links only to that peer to resolve the situation, without
having to reset the broadcast link at all. This solution entails a much
lower risk of negative consequences for the own node as well as for
the overall cluster.
We implement this change in this commit.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mOLm
-----END PGP SIGNATURE-----
Merge tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- PAE40 related updates
- SLC errata for region ops
- intc line masking by default
* tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: Mask individual IRQ lines during core INTC init
ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
ARC: dma: implement dma_unmap_page and sg variant
ARCv2: SLC: Make sure busy bit is set properly for region ops
ARC: [plat-sim] Include this platform unconditionally
ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103
ARC: defconfig: Cleanup from old Kconfig options
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
This was reported many times, and this was even mentioned in commit
52ee2dfdd4 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.
We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups. Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.
Reported-by: Troy Kensinger <tkensinger@google.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 3fcece12bc ("net: store port/representator id in metadata_dst")
added a new type field to metadata_dst, but metadata_dst_free() wasn't
updated to check it before freeing the METADATA_IP_TUNNEL specific dst
cache entry.
This is not currently causing problems since it's far enough back in the
struct to be zeroed for the only other type currently in existance
(METADATA_HW_PORT_MUX), but nevertheless it's not correct.
Fixes: 3fcece12bc ("net: store port/representator id in metadata_dst")
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
One nagging difference between ipv4 and ipv6 is host routes for ipv6
addresses are installed using the loopback device or VRF / L3 Master
device. e.g.,
2001:db8:1::/120 dev veth0 proto kernel metric 256 pref medium
local 2001:db8:1::1 dev lo table local proto kernel metric 0 pref medium
Using the loopback device is convenient -- necessary for local tx, but
has some nasty side effects, most notably setting the 'lo' device down
causes all host routes for all local IPv6 address to be removed from the
FIB and completely breaks IPv6 networking across all interfaces.
This patch puts FIB entries for IPv6 routes against the device. This
simplifies the routes in the FIB, for example by making dst->dev and
rt6i_idev->dev the same (a future patch can look at removing the device
reference taken for rt6i_idev for FIB entries).
When copies are made on FIB lookups, the cloned route has dst->dev
set to loopback (or the L3 master device). This is needed for the
local Tx of packets to local addresses.
With fib entries allocated against the real network device, the addrconf
code that reinserts host routes on admin up of 'lo' is no longer needed.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
compile tested only, but saw no warnings/errors with
allmodconfig build.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney says:
====================
MIPS,bpf: Improvements for MIPS eBPF JIT
Here are several improvements and bug fixes for the MIPS eBPF JIT.
The main change is the addition of support for JLT, JLE, JSLT and JSLE
ops, that were recently added.
Also fix WARN output when used with preemptable kernel, and a small
cleanup/optimization in the use of BPF_OP(insn->code).
I suggest that the whole thing go via the BPF/net-next path as there
are dependencies on code that is not yet merged to Linus' tree.
Still pending are changes to reduce stack usage when the verifier can
determine the maximum stack size.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The code looks a little cleaner if we replace BPF_OP(insn->code) with
the local variable bpf_op. Caching the value this way also saves 300
bytes (about 1%) in the code size of the JIT.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the kernel is configured with preemption enabled we were getting
warning stack traces for use of current_cpu_type().
Fix by moving the test between preempt_disable()/preempt_enable() and
caching the results of the CPU type tests for use during code
generation.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make these const as they are only passed as an argument to the
function device_create_file and device_remove_file and the corresponding
arguments are of type const.
Done using Coccinelle
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-08-21
1) Support RX checksum with IPsec crypto offload for esp4/esp6.
From Ilan Tayari.
2) Fixup IPv6 checksums when doing IPsec crypto offload.
From Yossi Kuperman.
3) Auto load the xfrom offload modules if a user installs
a SA that requests IPsec offload. From Ilan Tayari.
4) Clear RX offload informations in xfrm_input to not
confuse the TX path with stale offload informations.
From Ilan Tayari.
5) Allow IPsec GSO for local sockets if the crypto operation
will be offloaded.
6) Support setting of an output mark to the xfrm_state.
This mark can be used to to do the tunnel route lookup.
From Lorenzo Colitti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Current max_register setting breaks reading nvram on certain chips and
also reading the standard registers on RX8130 where register map starts
at 0x10.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 11e5890b53 "rtc: ds1307: convert driver to regmap"
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w).
If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg,
try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w).
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fib6_add(), it is possible that fib6_add_1() picks an intermediate
node and sets the node's fn->leaf to NULL in order to add this new
route. However, if fib6_add_rt2node() fails to add the new
route for some reason, fn->leaf will be left as NULL and could
potentially cause crash when fn->leaf is accessed in fib6_locate().
This patch makes sure fib6_repair_tree() is called to properly repair
fn->leaf in the above failure case.
Here is the syzkaller reported general protection fault in fib6_locate:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 0 PID: 40937 Comm: syz-executor3 Not tainted
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801d7d64100 ti: ffff8801d01a0000 task.ti: ffff8801d01a0000
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] __ipv6_prefix_equal64_half include/net/ipv6.h:475 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] ipv6_prefix_equal include/net/ipv6.h:492 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate_1 net/ipv6/ip6_fib.c:1210 [inline]
RIP: 0010:[<ffffffff82a3e0e1>] [<ffffffff82a3e0e1>] fib6_locate+0x281/0x3c0 net/ipv6/ip6_fib.c:1233
RSP: 0018:ffff8801d01a36a8 EFLAGS: 00010202
RAX: 0000000000000020 RBX: ffff8801bc790e00 RCX: ffffc90002983000
RDX: 0000000000001219 RSI: ffff8801d01a37a0 RDI: 0000000000000100
RBP: ffff8801d01a36f0 R08: 00000000000000ff R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: dffffc0000000000 R14: ffff8801d01a37a0 R15: 0000000000000000
FS: 00007f6afd68c700(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004c6340 CR3: 00000000ba41f000 CR4: 00000000001426f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff8801d01a37a8 ffff8801d01a3780 ffffed003a0346f5 0000000c82a23ea0
ffff8800b7bd7700 ffff8801d01a3780 ffff8800b6a1c940 ffffffff82a23ea0
ffff8801d01a3920 ffff8801d01a3748 ffffffff82a223d6 ffff8801d7d64988
Call Trace:
[<ffffffff82a223d6>] ip6_route_del+0x106/0x570 net/ipv6/route.c:2109
[<ffffffff82a23f9d>] inet6_rtm_delroute+0xfd/0x100 net/ipv6/route.c:3075
[<ffffffff82621359>] rtnetlink_rcv_msg+0x549/0x7a0 net/core/rtnetlink.c:3450
[<ffffffff8274c1d1>] netlink_rcv_skb+0x141/0x370 net/netlink/af_netlink.c:2281
[<ffffffff82613ddf>] rtnetlink_rcv+0x2f/0x40 net/core/rtnetlink.c:3456
[<ffffffff8274ad38>] netlink_unicast_kernel net/netlink/af_netlink.c:1206 [inline]
[<ffffffff8274ad38>] netlink_unicast+0x518/0x750 net/netlink/af_netlink.c:1232
[<ffffffff8274b83e>] netlink_sendmsg+0x8ce/0xc30 net/netlink/af_netlink.c:1778
[<ffffffff82564aff>] sock_sendmsg_nosec net/socket.c:609 [inline]
[<ffffffff82564aff>] sock_sendmsg+0xcf/0x110 net/socket.c:619
[<ffffffff82564d62>] sock_write_iter+0x222/0x3a0 net/socket.c:834
[<ffffffff8178523d>] new_sync_write+0x1dd/0x2b0 fs/read_write.c:478
[<ffffffff817853f4>] __vfs_write+0xe4/0x110 fs/read_write.c:491
[<ffffffff81786c38>] vfs_write+0x178/0x4b0 fs/read_write.c:538
[<ffffffff817892a9>] SYSC_write fs/read_write.c:585 [inline]
[<ffffffff817892a9>] SyS_write+0xd9/0x1b0 fs/read_write.c:577
[<ffffffff82c71e32>] entry_SYSCALL_64_fastpath+0x12/0x17
Note: there is no "Fixes" tag as this seems to be a bug introduced
very early.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make this const as it is only used in a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This important to call qdisc_tree_reduce_backlog() after changing queue
length. Parent qdisc should deactivate class in ->qlen_notify() called from
qdisc_tree_reduce_backlog() but this happens only if qdisc->q.qlen in zero.
Missed class deactivations leads to crashes/warnings at picking packets
from empty qdisc and corrupting state at reactivating this class in future.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 86a7996cc8 ("net_sched: introduce qdisc_replace() helper")
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is
known to be 0 at this point.
So return -ENODEV instead in the first case and use 'of_iomap()' instead of
the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd
case.
Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes
redundant and is removed.
While at it, turn a 'err != 0' test into an equivalent 'err' to be more
consistent.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement new 32-bit Firmware Port Capabilities in order to
handle new speeds which couldn't be represented in the old 16-bit
Firmware Port Capabilities values.
Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the current code, dev_map_free() can still race with dev_map_notification().
In dev_map_free(), we remove dtab from the list of dtabs after we purged
all entries from it. However, we don't do xchg() with NULL or the like,
so the entry at that point is still pointing to the device. If a unregister
notification comes in at the same time, we therefore risk a double-free,
since the pointer is still present in the map, and then pushed again to
__dev_map_entry_free().
All this is completely unnecessary. Just remove the dtab from the list
right before the synchronize_rcu(), so all outstanding readers from the
notifier list have finished by then, thus we don't need to deal with this
corner case anymore and also wouldn't need to nullify dev entires. This is
fine because we iterate over the map releasing all entries and therefore
dev references anyway.
Fixes: 4cc7b9544b ("bpf: devmap fix mutex in rcu critical section")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like this was accidentally missed, so still add s390x
as supported eBPF JIT arch to bpf_jit_enable.
Fixes: 014cd0a368 ("bpf: Update sysctl documentation to list all supported architectures")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some updates for mlx5 ethernet and IPoIB device driver.
Eran added the support for manage physical link state from netdevice upon
interface open/close requests.
Feras fixed the driver name showed in ethtool for IPoIB interfaces.
Shalom Added the support for IPoIB netdevice ethtool get link settings.
Gal and Eran exposed new diagnostic counters for outbound PCIe stalls and overflow
and RX buffer fullness statistics.
Code cleanups from Or Gerlitz.
Variable types cleanup from Gal.
Thanks,
Saeed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZmV1eAAoJEEg/ir3gV/o+jWwIAMYkEr6R3Irzz0pwP/w/QcPG
5Hnev1aDQ6zRd+9qadimF5HS/A1dZKB7bM5+IwbRXnOX1MdWUwmk5mJwVnPpkbVv
tHZwUYD3YyikFKSRHZt89kGGXtqndOdfFqvQUP8TJzSRLwoZWTnYTz0eodV0bJAU
6vjatd4OR1KF4g2ACGYANA4hplorFC9pigmR+ZsON/+JUim9JfnwhNbb8mpOw1Q5
sFPXIQo6pMNnYK/+5VVBj+YTzuQGZMUlwAhJPYSnce+18KYiQ6ATIrJO5GCDlYVP
rpQlC5sTXcBwGtUlGtAaw9Keh2SO/dhDmcWC31b/d8zOeACAxAYrBcBypSuw74w=
=O7Us
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2017-08-17-V2' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2017-08-17
Some updates for mlx5 ethernet and IPoIB device driver.
Eran added the support for manage physical link state from netdevice upon
interface open/close requests.
Feras fixed the driver name showed in ethtool for IPoIB interfaces.
Shalom Added the support for IPoIB netdevice ethtool get link settings.
Gal and Eran exposed new diagnostic counters for outbound PCIe stalls and overflow
and RX buffer fullness statistics.
Code cleanups from Or Gerlitz.
Variable types cleanup from Gal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
