Commit Graph

2293 Commits

Author SHA1 Message Date
Chris Wright
73219d1780 [PATCH] mmap topdown fix for large stack limit, large allocation
The topdown changes in 2.6.12-rc1 can cause large allocations with large
stack limit to fail, despite there being space available.  The
mmap_base-len is only valid when len >= mmap_base.  However, nothing in
topdown allocator checks this.  It's only (now) caught at higher level,
which will cause allocation to simply fail.  The following change restores
the fallback to bottom-up path, which will allow large allocations with
large stack limit to potentially still succeed.

Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Wolfgang Wander
1363c3cd86 [PATCH] Avoiding mmap fragmentation
Ingo recently introduced a great speedup for allocating new mmaps using the
free_area_cache pointer which boosts the specweb SSL benchmark by 4-5% and
causes huge performance increases in thread creation.

The downside of this patch is that it does lead to fragmentation in the
mmap-ed areas (visible via /proc/self/maps), such that some applications
that work fine under 2.4 kernels quickly run out of memory on any 2.6
kernel.

The problem is twofold:

  1) the free_area_cache is used to continue a search for memory where
     the last search ended.  Before the change new areas were always
     searched from the base address on.

     So now new small areas are cluttering holes of all sizes
     throughout the whole mmap-able region whereas before small holes
     tended to close holes near the base leaving holes far from the base
     large and available for larger requests.

  2) the free_area_cache also is set to the location of the last
     munmap-ed area so in scenarios where we allocate e.g.  five regions of
     1K each, then free regions 4 2 3 in this order the next request for 1K
     will be placed in the position of the old region 3, whereas before we
     appended it to the still active region 1, placing it at the location
     of the old region 2.  Before we had 1 free region of 2K, now we only
     get two free regions of 1K -> fragmentation.

The patch addresses thes issues by introducing yet another cache descriptor
cached_hole_size that contains the largest known hole size below the
current free_area_cache.  If a new request comes in the size is compared
against the cached_hole_size and if the request can be filled with a hole
below free_area_cache the search is started from the base instead.

The results look promising: Whereas 2.6.12-rc4 fragments quickly and my
(earlier posted) leakme.c test program terminates after 50000+ iterations
with 96 distinct and fragmented maps in /proc/self/maps it performs nicely
(as expected) with thread creation, Ingo's test_str02 with 20000 threads
requires 0.7s system time.

Taking out Ingo's patch (un-patch available per request) by basically
deleting all mentions of free_area_cache from the kernel and starting the
search for new memory always at the respective bases we observe: leakme
terminates successfully with 11 distinctive hardly fragmented areas in
/proc/self/maps but thread creating is gringdingly slow: 30+s(!) system
time for Ingo's test_str02 with 20000 threads.

Now - drumroll ;-) the appended patch works fine with leakme: it ends with
only 7 distinct areas in /proc/self/maps and also thread creation seems
sufficiently fast with 0.71s for 20000 threads.

Signed-off-by: Wolfgang Wander <wwc@rentec.com>
Credit-to: "Richard Purdie" <rpurdie@rpsys.net>
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu> (partly)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
Christoph Lameter
e7c8d5c995 [PATCH] node local per-cpu-pages
This patch modifies the way pagesets in struct zone are managed.

Each zone has a per-cpu array of pagesets.  So any particular CPU has some
memory in each zone structure which belongs to itself.  Even if that CPU is
not local to that zone.

So the patch relocates the pagesets for each cpu to the node that is nearest
to the cpu instead of allocating the pagesets in the (possibly remote) target
zone.  This means that the operations to manage pages on remote zone can be
done with information available locally.

We play a macro trick so that non-NUMA pmachines avoid the additional
pointer chase on the page allocator fastpath.

AIM7 benchmark on a 32 CPU SGI Altix

w/o patches:
Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      484.68  100       484.6769     12.01      1.97   Fri Mar 25 11:01:42 2005
  100    27140.46   89       271.4046     21.44    148.71   Fri Mar 25 11:02:04 2005
  200    30792.02   82       153.9601     37.80    296.72   Fri Mar 25 11:02:42 2005
  300    32209.27   81       107.3642     54.21    451.34   Fri Mar 25 11:03:37 2005
  400    34962.83   78        87.4071     66.59    588.97   Fri Mar 25 11:04:44 2005
  500    31676.92   75        63.3538     91.87    742.71   Fri Mar 25 11:06:16 2005
  600    36032.69   73        60.0545     96.91    885.44   Fri Mar 25 11:07:54 2005
  700    35540.43   77        50.7720    114.63   1024.28   Fri Mar 25 11:09:49 2005
  800    33906.70   74        42.3834    137.32   1181.65   Fri Mar 25 11:12:06 2005
  900    34120.67   73        37.9119    153.51   1325.26   Fri Mar 25 11:14:41 2005
 1000    34802.37   74        34.8024    167.23   1465.26   Fri Mar 25 11:17:28 2005

with slab API changes and pageset patch:

Tasks    jobs/min  jti  jobs/min/task      real       cpu
    1      485.00  100       485.0000     12.00      1.96   Fri Mar 25 11:46:18 2005
  100    28000.96   89       280.0096     20.79    150.45   Fri Mar 25 11:46:39 2005
  200    32285.80   79       161.4290     36.05    293.37   Fri Mar 25 11:47:16 2005
  300    40424.15   84       134.7472     43.19    438.42   Fri Mar 25 11:47:59 2005
  400    39155.01   79        97.8875     59.46    590.05   Fri Mar 25 11:48:59 2005
  500    37881.25   82        75.7625     76.82    730.19   Fri Mar 25 11:50:16 2005
  600    39083.14   78        65.1386     89.35    872.79   Fri Mar 25 11:51:46 2005
  700    38627.83   77        55.1826    105.47   1022.46   Fri Mar 25 11:53:32 2005
  800    39631.94   78        49.5399    117.48   1169.94   Fri Mar 25 11:55:30 2005
  900    36903.70   79        41.0041    141.94   1310.78   Fri Mar 25 11:57:53 2005
 1000    36201.23   77        36.2012    160.77   1458.31   Fri Mar 25 12:00:34 2005

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Shobhit Dayal <shobhit@calsoftinc.com>
Signed-off-by: Shai Fultheim <Shai@Scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:16 -07:00
David Gibson
63551ae0fe [PATCH] Hugepage consolidation
A lot of the code in arch/*/mm/hugetlbpage.c is quite similar.  This patch
attempts to consolidate a lot of the code across the arch's, putting the
combined version in mm/hugetlb.c.  There are a couple of uglyish hacks in
order to covert all the hugepage archs, but the result is a very large
reduction in the total amount of code.  It also means things like hugepage
lazy allocation could be implemented in one place, instead of six.

Tested, at least a little, on ppc64, i386 and x86_64.

Notes:
	- this patch changes the meaning of set_huge_pte() to be more
	  analagous to set_pte()
	- does SH4 need s special huge_ptep_get_and_clear()??

Acked-by: William Lee Irwin <wli@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:15 -07:00
Martin Hicks
1e7e5a9048 [PATCH] VM: rate limit early reclaim
When early zone reclaim is turned on the LRU is scanned more frequently when a
zone is low on memory.  This limits when the zone reclaim can be called by
skipping the scan if another thread (either via kswapd or sync reclaim) is
already reclaiming from the zone.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Martin Hicks
0c35bbadc5 [PATCH] VM: add __GFP_NORECLAIM
When using the early zone reclaim, it was noticed that allocating new pages
that should be spread across the whole system caused eviction of local pages.

This adds a new GFP flag to prevent early reclaim from happening during
certain allocation attempts.  The example that is implemented here is for page
cache pages.  We want page cache pages to be spread across the whole system,
and we don't want page cache pages to evict other pages to get local memory.

Signed-off-by:  Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Martin Hicks
753ee72896 [PATCH] VM: early zone reclaim
This is the core of the (much simplified) early reclaim.  The goal of this
patch is to reclaim some easily-freed pages from a zone before falling back
onto another zone.

One of the major uses of this is NUMA machines.  With the default allocator
behavior the allocator would look for memory in another zone, which might be
off-node, before trying to reclaim from the current zone.

This adds a zone tuneable to enable early zone reclaim.  It is selected on a
per-zone basis and is turned on/off via syscall.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Martin Hicks
bfbb38fb80 [PATCH] VM: add may_swap flag to scan_control
Here's the next round of these patches.  These are totally different in
an attempt to meet the "simpler" request after the last patches.  For
reference the earlier threads are:

http://marc.theaimsgroup.com/?l=linux-kernel&m=110839604924587&w=2
http://marc.theaimsgroup.com/?l=linux-mm&m=111461480721249&w=2

This set of patches replaces my other vm- patches that are currently in
-mm.  So they're against 2.6.12-rc5-mm1 about half way through the -mm
patchset.

As I said already this patch is a lot simpler.  The reclaim is turned on
or off on a per-zone basis using a syscall.  I haven't tested the x86
syscall, so it might be wrong.  It uses the existing reclaim/pageout
code with the small addition of a may_swap flag to scan_control
(patch 1/4).

I also added __GFP_NORECLAIM (patch 3/4) so that certain allocation
types can be flagged to never cause reclaim.  This was a deficiency
that was in all of my earlier patch sets.  Previously, doing a big
buffered read would fill one zone with page cache and then start to
reclaim from that same zone, leaving the other zones untouched.

Adding some extra throttling on the reclaim was also required (patch
4/4).  Without the machine would grind to a crawl when doing a "make -j"
kernel build.  Even with this patch the System Time is higher on
average, but it seems tolerable.  Here are some numbers for kernbench
runs on a 2-node, 4cpu, 8Gig RAM Altix in the "make -j" run:

			wall  user   sys   %cpu  ctx sw.  sleeps
			----  ----   ---   ----   ------  ------
No patch		1009  1384   847   258   298170   504402
w/patch, no reclaim     880   1376   667   288   254064   396745
w/patch & reclaim       1079  1385   926   252   291625   548873

These numbers are the average of 2 runs of 3 "make -j" runs done right
after system boot.  Run-to-run variability for "make -j" is huge, so
these numbers aren't terribly useful except to seee that with reclaim
the benchmark still finishes in a reasonable amount of time.

I also looked at the NUMA hit/miss stats for the "make -j" runs and the
reclaim doesn't make any difference when the machine is thrashing away.

Doing a "make -j8" on a single node that is filled with page cache pages
takes 700 seconds with reclaim turned on and 735 seconds without reclaim
(due to remote memory accesses).

The simple zone_reclaim syscall program is at
http://www.bork.org/~mort/sgi/zone_reclaim.c

This patch:

This adds an extra switch to the scan_control struct.  It simply lets the
reclaim code know if its allowed to swap pages out.

This was required for a simple per-zone reclaimer.  Without this addition
pages would be swapped out as soon as a zone ran out of memory and the early
reclaim kicked in.

Signed-off-by: Martin Hicks <mort@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Nikita Danilov
295ab93497 [PATCH] mm: add /proc/zoneinfo
Add /proc/zoneinfo file to display information about memory zones.  Useful
to analyze VM behaviour.

Signed-off-by: Nikita Danilov <nikita@clusterfs.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:14 -07:00
Prasanna Meda
05b7438475 [PATCH] madvise: merge the maps
This attempts to merge back the split maps.  This code is mostly copied
from Chrisw's mlock merging from post 2.6.11 trees.  The only difference is
in munmapped_error handling.  Also passed prev to willneed/dontneed,
eventhogh they do not handle it now, since I felt it will be cleaner,
instead of handling prev in madvise_vma in some cases and in subfunction in
some cases.

Signed-off-by: Prasanna Meda <pmeda@akamai.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Prasanna Meda
e798c6e87b [PATCH] madvise: do not split the maps
This attempts to avoid splittings when it is not needed, that is when
vm_flags are same as new flags.  The idea is from the <2.6.11 mlock_fixup
and others.  This will provide base for the next madvise merging patch.

Signed-off-by: Prasanna Meda <pmeda@akamai.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
akpm@osdl.org
b15e0905f2 [PATCH] vmscan: notice slab shrinking
Fix a problem identified by Andrea Arcangeli <andrea@suse.de>

kswapd will set a zone into all_unreclaimable state if it sees that we're not
successfully reclaiming LRU pages.  But that fails to notice that we're
successfully reclaiming slab obects, so we can set all_unreclaimable too soon.

So change shrink_slab() to return a success indication if it actually
reclaimed some objects, and don't assume that the zone is all_unreclaimable if
that is true.  This means that we won't enter all_unreclaimable state if we
are successfully freeing slab objects but we're not yet actually freeing slab
pages, due to internal fragmentation.

(hm, this has a shortcoming.  We could be successfully freeing ZONE_NORMAL
slab objects while being really oom on ZONE_DMA.  If that happens then kswapd
might burn a lot of CPU.  But given that there might be some slab objects in
ZONE_DMA, perhaps that is appropriate.)

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Ingo Molnar
39c715b717 [PATCH] smp_processor_id() cleanup
This patch implements a number of smp_processor_id() cleanup ideas that
Arjan van de Ven and I came up with.

The previous __smp_processor_id/_smp_processor_id/smp_processor_id API
spaghetti was hard to follow both on the implementational and on the
usage side.

Some of the complexity arose from picking wrong names, some of the
complexity comes from the fact that not all architectures defined
__smp_processor_id.

In the new code, there are two externally visible symbols:

 - smp_processor_id(): debug variant.

 - raw_smp_processor_id(): nondebug variant. Replaces all existing
   uses of _smp_processor_id() and __smp_processor_id(). Defined
   by every SMP architecture in include/asm-*/smp.h.

There is one new internal symbol, dependent on DEBUG_PREEMPT:

 - debug_smp_processor_id(): internal debug variant, mapped to
                             smp_processor_id().

Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new
lib/smp_processor_id.c file.  All related comments got updated and/or
clarified.

I have build/boot tested the following 8 .config combinations on x86:

 {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT}

I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT.  (Other
architectures are untested, but should work just fine.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:13 -07:00
Suresh Siddha
84929801e1 [PATCH] x86_64: TASK_SIZE fixes for compatibility mode processes
Appended patch will setup compatibility mode TASK_SIZE properly.  This will
fix atleast three known bugs that can be encountered while running
compatibility mode apps.

a) A malicious 32bit app can have an elf section at 0xffffe000.  During
   exec of this app, we will have a memory leak as insert_vm_struct() is
   not checking for return value in syscall32_setup_pages() and thus not
   freeing the vma allocated for the vsyscall page.  And instead of exec
   failing (as it has addresses > TASK_SIZE), we were allowing it to
   succeed previously.

b) With a 32bit app, hugetlb_get_unmapped_area/arch_get_unmapped_area
   may return addresses beyond 32bits, ultimately causing corruption
   because of wrap-around and resulting in SEGFAULT, instead of returning
   ENOMEM.

c) 32bit app doing this below mmap will now fail.

  mmap((void *)(0xFFFFE000UL), 0x10000UL, PROT_READ|PROT_WRITE,
	MAP_FIXED|MAP_PRIVATE|MAP_ANON, 0, 0);

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:12 -07:00
Zaur Kambarov
589777eab7 [PATCH] coverity: idr_get_new_above_int() overrun fix
This patch fixes overrun of array pa:
92   		struct idr_layer *pa[MAX_LEVEL];

in

98   		l = idp->layers;
99   		pa[l--] = NULL;

by passing idp->layers, set in
202  		idp->layers = layers;
to function  sub_alloc in
203  		v = sub_alloc(idp, ptr, &id);

Signed-off-by: Zaur Kambarov <zkambarov@coverity.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:12 -07:00
Zaur Kambarov
3a845099b2 [PATCH] coverity: ipmi: avoid overrun of ipmi_interfaces[]
Fix overrun of static array "ipmi_interfaces" of size 4 at position 4 with
index variable "if_num".

Definitions involved:
297  	#define MAX_IPMI_INTERFACES 4
298  	static ipmi_smi_t ipmi_interfaces[MAX_IPMI_INTERFACES];

Signed-off-by: Zaur Kambarov <zkambarov@coverity.com>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:11 -07:00
bobl
7f20b6a479 [PATCH] megaraid build fix
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:11 -07:00
Andrew Morton
9a558cb4ec [PATCH] arm: irqs_disabled() type fix
kernel/sched.c: In function `__might_sleep':
kernel/sched.c:5461: warning: int format, long unsigned int arg (arg 3)

We expect irqs_disabled() to return an int (poor man's bool).

Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 18:46:11 -07:00
Linus Torvalds
9723d95d10 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 2005-06-21 18:19:10 -07:00
David S. Miller
7049e6800f [SPARC64]: Add prefetch support.
The implementation is optimal for UltraSPARC-III and later.
It will work, however suboptimally, on UltraSPARC-II and
be treated as a NOP on UltraSPARC-I.

It is not worth code patching this thing as the highest cost
is the code space, and code patching cannot eliminate that.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 16:20:28 -07:00
Linus Torvalds
4a4f8fdba6 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2005-06-21 15:45:19 -07:00
Greg KH
2c6e5a839f [PATCH] devfs: remove devfs from Kconfig preventing it from being built
Here's a much smaller patch to simply disable devfs from the build.  If
this goes well, and there are no complaints for a few weeks, I'll resend
my big "devfs-die-die-die" series of patches that rip the whole thing
out of the kernel tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21 15:41:16 -07:00
David S. Miller
8005aba69a [SPARC64]: Fix cmsg length checks in Solaris emulation layer.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 15:39:22 -07:00
Linus Torvalds
9527cc77e2 Merge 'for-linus' branch of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6 2005-06-21 14:49:35 -07:00
David S. Miller
90f66914c8 [IPV4]: Fix fib_trie.c's args to fib_dump_info().
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:43:28 -07:00
Patrick McHardy
047601bf7c [NETFILTER]: Fix ip6t_LOG sit tunnel logging
Sit tunnel logging is currently broken:

MAC=01:23:45:67:89:ab->01:23:45:47:89:ac TUNNEL=123.123.  0.123-> 12.123.  6.123

Apart from the broken IP address, MAC addresses are printed differently
for sit tunnels than for everything else.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:07:13 -07:00
Patrick McHardy
2715bcf9ef [NETFILTER]: Drop conntrack reference in ip_call_ra_chain()/ip_mr_input()
Drop reference before handing the packets to raw_rcv()

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:06:24 -07:00
Patrick McHardy
6150bacfec [NETFILTER]: Check TCP checksum in ipt_REJECT
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:03:46 -07:00
Keir Fraser
e3be8ba792 [NETFILTER]: Avoid unncessary checksum validation in UDP connection tracking
Signed-off-by: Keir Fraser <Keir.Fraser@xl.cam.ac.uk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:03:23 -07:00
Patrick McHardy
97216c799a [NETFILTER]: Missing owner-field initialization in ip6table_raw
I missed this one when fixing up iptable_raw.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:03:01 -07:00
Phil Oester
1d3cdb41f5 [NETFILTER]: expectation timeouts are compulsory
Since expectation timeouts were made compulsory [1], there is no need to
check for them in ip_conntrack_expect_insert.

[1] https://lists.netfilter.org/pipermail/netfilter-devel/2005-January/018143.html

Signed-off-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:02:42 -07:00
Patrick McHardy
e98231858b [NETFILTER]: Restore netfilter assumptions in IPv6 multicast
Netfilter assumes that skb->data == skb->nh.ipv6h

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:02:15 -07:00
Patrick McHardy
18b8afc771 [NETFILTER]: Kill nf_debug
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:01:57 -07:00
Patrick McHardy
e45b1be8bc [NETFILTER]: Kill lockhelp.h
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 14:01:30 -07:00
David L Stevens
c9e3e8b695 [IPV6]: multicast join and misc
Here is a simplified version of the patch to fix a bug in IPv6
multicasting. It:

1) adds existence check & EADDRINUSE error for regular joins
2) adds an exception for EADDRINUSE in the source-specific multicast
        join (where a prior join is ok)
3) adds a missing/needed read_lock on sock_mc_list; would've raced
        with destroying the socket on interface down without
4) adds a "leave group" in the (INCLUDE, empty) source filter case.
        This frees unneeded socket buffer memory, but also prevents
        an inappropriate interaction among the 8 socket options that
        mess with this. Some would fail as if in the group when you
        aren't really.

Item #4 had a locking bug in the last version of this patch; rather than
removing the idev->lock read lock only, I've simplified it to remove
all lock state in the path and treat it as a direct "leave group" call for
the (INCLUDE,empty) case it covers. Tested on an MP machine. :-)

Much thanks to HoerdtMickael <hoerdt@clarinet.u-strasbg.fr> who
reported the original bug.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 13:58:25 -07:00
Jamal Hadi Salim
0d51aa80a9 [IPV6]: V6 route events reported with wrong netlink PID and seq number
Essentially netlink at the moment always reports a pid and sequence of 0
always for v6 route activities. 
To understand the repurcassions of this look at:
http://lists.quagga.net/pipermail/quagga-dev/2005-June/003507.html

While fixing this, i took the liberty to resolve the outstanding issue
of IPV6 routes inserted via ioctls to have the correct pids as well.

This patch tries to behave as close as possible to the v4 routes i.e
maintains whatever PID the socket issuing the command owns as opposed to
the process. That made the patch a little bulky.

I have tested against both netlink derived utility to add/del routes as
well as ioctl derived one. The Quagga folks have tested against quagga.
This fixes the problem and so far hasnt been detected to introduce any
new issues.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 13:51:04 -07:00
Robert Olsson
19baf839ff [IPV4]: Add LC-Trie FIB lookup algorithm.
Signed-off-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 12:43:18 -07:00
Alexey Kuznetsov
18b504e25f [NETLINK]: netlink_callback structure needs 5 args not 4
net/ipv4/tcp_diag.c uses up to ->args[4]

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-21 12:38:48 -07:00
Linus Torvalds
1d345dac1f Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 2005-06-20 16:00:33 -07:00
Linus Torvalds
fb39588457 Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 2005-06-20 15:58:58 -07:00
Greg Kroah-Hartman
87c8a4433b [PATCH] PCI: fix show_modalias() function due to attribute change
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:28:51 -07:00
Greg Kroah-Hartman
4893e9d1cf [PATCH] USB: fix show_modalias() function due to attribute change
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:27:35 -07:00
Jon Smirl
9d9d27fb65 [PATCH] SYSFS: fix PAGE_SIZE check
Without this change I can't set an attribute exactly PAGE_SIZE in
length. There is no need for zero termination because the interface
uses lengths.

From: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:38 -07:00
Benjamin Herrenschmidt
42b16c051c [PATCH] Driver core: Don't "lose" devices on suspend on failure
I think we need this patch or we might "lose" devices to the dpm_irq_off
list if a failure occurs during the suspend process.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:37 -07:00
Maneesh Soni
8215534ce7 [PATCH] sysfs-iattr: set inode attributes
o Following patch sets the attributes for newly allocated inodes for sysfs
  objects. If the object has non-default attributes, inode attributes are
  set as saved in sysfs_dirent->s_iattr, pointer to struct iattr.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:37 -07:00
Maneesh Soni
988d186de5 [PATCH] sysfs-iattr: add sysfs_setattr
o This adds ->i_op->setattr VFS method for sysfs inodes. The changed
  attribues are saved in the persistent sysfs_dirent structure as a pointer
  to struct iattr. The struct iattr is allocated only for those sysfs_dirent's
  for which default attributes are getting changed. Thanks to Jon Smirl for
  this suggestion.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:37 -07:00
Maneesh Soni
6fa5c828c7 [PATCH] sysfs-iattr: attach sysfs_dirent before new inode
o The following patch makes sure to attach sysfs_dirent to the dentry before
  allocation a new inode through sysfs_create(). This change is done as
  preparatory work for implementing ->i_op->setattr() functionality for
  sysfs objects.

Signed-off-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:36 -07:00
Yani Ioannou
050480f12a [PATCH] I2C: drivers/i2c/chips/adm1026.c: use dynamic sysfs callbacks
Finally (phew!) this patch demonstrates how to adapt the adm1026 to
take advantage of the new callbacks, and the i2c-sysfs.h defined
structure/macros. Most of the other sensor/hwmon drivers could be
updated in the same way. The odd few exceptions (bmcsensors for
example) however might be better off with their own custom attribute
structure.

Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:36 -07:00
Yani Ioannou
0a3e7eeabc [PATCH] I2C: add i2c sensor_device_attribute and macros
This patch creates a new header with a potential standard i2c sensor
attribute type (which simply includes an int representing the sensor
number/index) and the associated macros, SENSOR_DEVICE_ATTR to define
a static attribute and to_sensor_dev_attr to get a
sensor_device_attribute reference from an embedded device_attribute
reference.

Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
2005-06-20 15:15:36 -07:00
Yani Ioannou
f2d03e1b3f [PATCH] Driver Core: include: update device attribute callbacks
Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20 15:15:35 -07:00