Clean up SVM's enter/exit assembly code so that it can be compiled
without OBJECT_FILES_NON_STANDARD. The "standard" __svm_vcpu_run() can't
be made 100% bulletproof, as RBP isn't restored on #VMEXIT, but that's
also the case for __vmx_vcpu_run(), and getting "close enough" is better
than not even trying.
As for SEV-ES, after yet another refresher on swap types, I realized
KVM can simply let the hardware restore registers after #VMEXIT, all
that's missing is storing the current values to the host save area
(they are swap type B). This should provide 100% accuracy when using
stack frames for unwinding, and requires less assembly.
In between, build the SEV-ES code iff CONFIG_KVM_AMD_SEV=y, and yank out
"support" for 32-bit kernels in __svm_sev_es_vcpu_run, which was
unnecessarily polluting the code for a configuration that is disabled
at build time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).
This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.
Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.
The splat below shows an object in mappings memleak:
[43929.457523] ------------[ cut here ]------------
[43929.457532] WARNING: CPU: 0 PID: 1139 at include/net/netfilter/nf_tables.h:1237 nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[...]
[43929.458014] RIP: 0010:nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458076] Code: 83 f8 01 77 ab 49 8d 7c 24 08 e8 37 5e d0 de 49 8b 6c 24 08 48 8d 7d 50 e8 e9 5c d0 de 8b 45 50 8d 50 ff 89 55 50 85 c0 75 86 <0f> 0b eb 82 0f 0b eb b3 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90
[43929.458081] RSP: 0018:ffff888140f9f4b0 EFLAGS: 00010246
[43929.458086] RAX: 0000000000000000 RBX: ffff8881434f5288 RCX: dffffc0000000000
[43929.458090] RDX: 00000000ffffffff RSI: ffffffffa26d28a7 RDI: ffff88810ecc9550
[43929.458093] RBP: ffff88810ecc9500 R08: 0000000000000001 R09: ffffed10281f3e8f
[43929.458096] R10: 0000000000000003 R11: ffff0000ffff0000 R12: ffff8881434f52a0
[43929.458100] R13: ffff888140f9f5f4 R14: ffff888151c7a800 R15: 0000000000000002
[43929.458103] FS: 00007f0c687c4740(0000) GS:ffff888390800000(0000) knlGS:0000000000000000
[43929.458107] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[43929.458111] CR2: 00007f58dbe5b008 CR3: 0000000123602005 CR4: 00000000001706f0
[43929.458114] Call Trace:
[43929.458118] <TASK>
[43929.458121] ? __warn+0x9f/0x1a0
[43929.458127] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458188] ? report_bug+0x1b1/0x1e0
[43929.458196] ? handle_bug+0x3c/0x70
[43929.458200] ? exc_invalid_op+0x17/0x40
[43929.458211] ? nft_setelem_data_deactivate+0xd7/0xf0 [nf_tables]
[43929.458271] ? nft_setelem_data_deactivate+0xe4/0xf0 [nf_tables]
[43929.458332] nft_mapelem_deactivate+0x24/0x30 [nf_tables]
[43929.458392] nft_rhash_walk+0xdd/0x180 [nf_tables]
[43929.458453] ? __pfx_nft_rhash_walk+0x10/0x10 [nf_tables]
[43929.458512] ? rb_insert_color+0x2e/0x280
[43929.458520] nft_map_deactivate+0xdc/0x1e0 [nf_tables]
[43929.458582] ? __pfx_nft_map_deactivate+0x10/0x10 [nf_tables]
[43929.458642] ? __pfx_nft_mapelem_deactivate+0x10/0x10 [nf_tables]
[43929.458701] ? __rcu_read_unlock+0x46/0x70
[43929.458709] nft_delset+0xff/0x110 [nf_tables]
[43929.458769] nft_flush_table+0x16f/0x460 [nf_tables]
[43929.458830] nf_tables_deltable+0x501/0x580 [nf_tables]
Fixes: 628bd3e49c ("netfilter: nf_tables: drop map element references from preparation phase")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing decorator type to lookup expression and tighten WARN_ON_ONCE
check in pipapo to spot earlier that this is unset.
Fixes: 29b359cf6d ("netfilter: nft_set_pipapo: walk over current view on netlink dump")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The recently added check to figure out if a fault happened on gmap ASCE
dereferences the gmap pointer in lowcore without checking that it is not
NULL. For all non-KVM processes the pointer is NULL, so that some value
from lowcore will be read. With the current layouts of struct gmap and
struct lowcore the read value (aka ASCE) is zero, so that this doesn't lead
to any observable bug; at least currently.
Fix this by adding the missing NULL pointer check.
Fixes: 64c3431808 ("s390/entry: compare gmap asce to determine guest/host fault")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
This reverts commit b5abd7f983.
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Fix memory leak due to a leaked mmget reference on an error handling
code path that is triggered when attempting to create KFD processes
while a GPU reset is in progress.
Fixes: 0ab2d7532b ("drm/amdkfd: prepare per-process debug enable and disable")
CC: Xiaogang Chen <xiaogang.chen@amd.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Tested-by: Harish Kasiviswanthan <Harish.Kasiviswanthan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The majority of those where removed in the commit aed01a6804
("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
But this one was missed because it's working on the resource and not the
BO. Since we also no longer use a fake start address for visible BOs
this will now trigger invalid mapping errors.
v2: also remove the unused variable
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
CC: stable@vger.kernel.org
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
(cherry picked from commit 83967c5732)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a unreference bo in the error path, to prevent leaking a bo ref.
Return 0 on success to clarify the success path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit a2f3d731be)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.
Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.
This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:
[<ffffffd613025ba0>] die+0xa8/0x2fc
[<ffffffd613027428>] bug_handler+0x44/0xec
[<ffffffd613016964>] brk_handler+0x90/0x144
[<ffffffd613041e58>] do_debug_exception+0xa0/0x148
[<ffffffd61400c208>] el1_dbg+0x60/0x7c
[<ffffffd61400c000>] el1h_64_sync_handler+0x38/0x90
[<ffffffd613011294>] el1h_64_sync+0x64/0x6c
[<ffffffd613102d88>] __might_resched+0x1fc/0x2e8
[<ffffffd613102b54>] __might_sleep+0x44/0x7c
[<ffffffd6130b6eac>] cpus_read_lock+0x1c/0xec
[<ffffffd6132c2820>] static_key_enable+0x14/0x38
[<ffffffd61400ac08>] crng_set_ready+0x14/0x28
[<ffffffd6130df4dc>] execute_in_process_context+0xb8/0xf8
[<ffffffd61400ab30>] _credit_init_bits+0x118/0x1dc
[<ffffffd6138580c8>] add_timer_randomness+0x264/0x270
[<ffffffd613857e54>] add_input_randomness+0x38/0x48
[<ffffffd613a80f94>] input_handle_event+0x2b8/0x490
[<ffffffd613a81310>] input_event+0x6c/0x98
According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.
So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
Reported-by: Guoyong Wang <guoyong.wang@mediatek.com>
Cc: stable@vger.kernel.org
Fixes: f5bda35fba ("random: use static branch for crng_ready()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When an UART is opened that still has .throttled set from a previous
open, the RX interrupt is enabled but the irq handler doesn't consider
it. This easily results in a stuck irq with the effect to occupy the CPU
in a tight loop.
So reset the throttle state in .startup() to ensure that RX irqs are
handled.
Fixes: d1ec8a2eab ("serial: stm32: update throttle and unthrottle ops for dma mode")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.
A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.
Fixes: 48a6092fb4 ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'mr7530-fixes'
Arınç ÜNAL says:
====================
Fix port mirroring on MT7530 DSA subdriver
This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
[exception RIP: io_serial_in+20]
RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002
RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0
RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f
R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020
R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
#12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
#18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f
Fixes: ef3db4a595 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes a deadlock when journal replay has many keys to insert that
were from fsck, not the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Interior nodes are not really needed, when we have to scan - but if this
pops up for leaf nodes we'll need a real heuristic.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When building for 32-bit platforms, for which size_t is 'unsigned int',
there is a warning from a format string in validate_bset_keys():
fs/bcachefs/btree_io.c: In function 'validate_bset_keys':
fs/bcachefs/btree_io.c:891:34: error: format '%lu' expects argument of type 'long unsigned int', but argument 12 has type 'unsigned int' [-Werror=format=]
891 | "bad k->u64s %u (min %u max %lu)", k->u64s,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fs/bcachefs/btree_io.c:603:32: note: in definition of macro 'btree_err'
603 | msg, ##__VA_ARGS__); \
| ^~~
fs/bcachefs/btree_io.c:887:21: note: in expansion of macro 'btree_err_on'
887 | if (btree_err_on(!bkeyp_u64s_valid(&b->format, k),
| ^~~~~~~~~~~~
fs/bcachefs/btree_io.c:891:64: note: format string is defined here
891 | "bad k->u64s %u (min %u max %lu)", k->u64s,
| ~~^
| |
| long unsigned int
| %u
cc1: all warnings being treated as errors
BKEY_U64s is size_t so the entire expression is promoted to size_t. Use
the '%zu' specifier so that there is no warning regardless of the width
of size_t.
Fixes: 031ad9e7db ("bcachefs: Check for packed bkeys that are too big")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404130747.wH6Dd23p-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202404131536.HdAMBOVc-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The size of the nilfs_type_by_mode array in the fs/nilfs2/dir.c file is
defined as "S_IFMT >> S_SHIFT", but the nilfs_set_de_type() function,
which uses this array, specifies the index to read from the array in the
same way as "(mode & S_IFMT) >> S_SHIFT".
static void nilfs_set_de_type(struct nilfs_dir_entry *de, struct inode
*inode)
{
umode_t mode = inode->i_mode;
de->file_type = nilfs_type_by_mode[(mode & S_IFMT)>>S_SHIFT]; // oob
}
However, when the index is determined this way, an out-of-bounds (OOB)
error occurs by referring to an index that is 1 larger than the array size
when the condition "mode & S_IFMT == S_IFMT" is satisfied. Therefore, a
patch to resize the nilfs_type_by_mode array should be applied to prevent
OOB errors.
Link: https://lkml.kernel.org/r/20240415182048.7144-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+2e22057de05b9f3b30d8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e22057de05b9f3b30d8
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
My old NEC address has been removed, so update MAINTAINERS and .mailmap to
map it to my gmail address.
Link: https://lkml.kernel.org/r/20240412181720.18452-1-nao.horiguchi@gmail.com
Signed-off-by: Naoya Horiguchi <nao.horiguchi@gmail.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used.
Link: https://lkml.kernel.org/r/20240410091441.3539905-1-linmiaohe@huawei.com
Fixes: 8d9bfb2608 ("hugetlb: add vma based lock for pmd sharing")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: Thorvald Natvig <thorvald@google.com>
Closes: https://lore.kernel.org/linux-mm/20240129161735.6gmjsswx62o4pbja@revolver/T/ [1]
Reviewed-by: Jane Chu <jane.chu@oracle.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Tycho Andersen <tandersen@netflix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to minimize code size (CONFIG_CC_OPTIMIZE_FOR_SIZE=y),
compiler might choose to make a regular function call (out-of-line) for
shmem_is_huge() instead of inlining it. When transparent hugepages are
disabled (CONFIG_TRANSPARENT_HUGEPAGE=n), it can cause compilation
error.
mm/shmem.c: In function `shmem_getattr':
./include/linux/huge_mm.h:383:27: note: in expansion of macro `BUILD_BUG'
383 | #define HPAGE_PMD_SIZE ({ BUILD_BUG(); 0; })
| ^~~~~~~~~
mm/shmem.c:1148:33: note: in expansion of macro `HPAGE_PMD_SIZE'
1148 | stat->blksize = HPAGE_PMD_SIZE;
To prevent the possible error, always inline shmem_is_huge() when
transparent hugepages are disabled.
Link: https://lkml.kernel.org/r/20240409155407.2322714-1-sumanthk@linux.ibm.com
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kefeng Wang reported that he was seeing some memory leaks with kmemleak
with page_owner enabled.
The reason is that we enable the page_owner_inited static branch and then
proceed with the linking of stack_list struct to dummy_stack, which means
that exists a race window between these two steps where we can have pages
already being allocated calling add_stack_record_to_list(), allocating
objects and linking them to stack_list, but then we set stack_list
pointing to dummy_stack in init_page_owner. Which means that the objects
that have been allocated during that time window are unreferenced and
lost.
Fix this by deferring the enablement of the branch until we have properly
set up the list.
Link: https://lkml.kernel.org/r/20240409131715.13632-1-osalvador@suse.de
Fixes: 4bedfb314b ("mm,page_owner: maintain own list of stack_records structs")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Closes: https://lore.kernel.org/linux-mm/74b147b0-718d-4d50-be75-d6afc801cd24@huawei.com/
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syskiller has produced an out of bounds access in fill_meta_index().
That out of bounds access is ultimately caused because the inode
has an inode number with the invalid value of zero, which was not checked.
The reason this causes the out of bounds access is due to following
sequence of events:
1. Fill_meta_index() is called to allocate (via empty_meta_index())
and fill a metadata index. It however suffers a data read error
and aborts, invalidating the newly returned empty metadata index.
It does this by setting the inode number of the index to zero,
which means unused (zero is not a valid inode number).
2. When fill_meta_index() is subsequently called again on another
read operation, locate_meta_index() returns the previous index
because it matches the inode number of 0. Because this index
has been returned it is expected to have been filled, and because
it hasn't been, an out of bounds access is performed.
This patch adds a sanity check which checks that the inode number
is not zero when the inode is created and returns -EINVAL if it is.
[phillip@squashfs.org.uk: whitespace fix]
Link: https://lkml.kernel.org/r/20240409204723.446925-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20240408220206.435788-1-phillip@squashfs.org.uk
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Closes: https://lore.kernel.org/lkml/87f5c007-b8a5-41ae-8b57-431e924c5915.bugreport@ubisectech.com/
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tony reported that the Machine check recovery was broken in v6.9-rc1, as
he was hitting a VM_BUG_ON when injecting uncorrectable memory errors to
DRAM.
After some more digging and debugging on his side, he realized that this
went back to v6.1, with the introduction of 'commit 0d206b5d2e
("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")'. That
commit, among other things, introduced swp_offset_pfn(), replacing
hwpoison_entry_to_pfn() in its favour.
The patch also introduced a VM_BUG_ON() check for is_pfn_swap_entry(), but
is_pfn_swap_entry() never got updated to cover hwpoison entries, which
means that we would hit the VM_BUG_ON whenever we would call
swp_offset_pfn() for such entries on environments with CONFIG_DEBUG_VM
set. Fix this by updating the check to cover hwpoison entries as well,
and update the comment while we are it.
Link: https://lkml.kernel.org/r/20240407130537.16977-1-osalvador@suse.de
Fixes: 0d206b5d2e ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reported-by: Tony Luck <tony.luck@intel.com>
Closes: https://lore.kernel.org/all/Zg8kLSl2yAlA3o5D@agluck-desk3/
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: <stable@vger.kernel.org> [6.1.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After UFFDIO_POISON, there can be two kinds of hugetlb pte markers, either
the POISON one or UFFD_WP one.
Allow change protection to run on a poisoned marker just like !hugetlb
cases, ignoring the marker irrelevant of the permission.
Here the two bits are mutual exclusive. For example, when install a
poisoned entry it must not be UFFD_WP already (by checking pte_none()
before such install). And it also means if UFFD_WP is set there must have
no POISON bit set. It makes sense because UFFD_WP is a bit to reflect
permission, and permissions do not apply if the pte is poisoned and
destined to sigbus.
So here we simply check uffd_wp bit set first, do nothing otherwise.
Attach the Fixes to UFFDIO_POISON work, as before that it should not be
possible to have poison entry for hugetlb (e.g., hugetlb doesn't do swap,
so no chance of swapin errors).
Link: https://lkml.kernel.org/r/20240405231920.1772199-1-peterx@redhat.com
Link: https://lore.kernel.org/r/000000000000920d5e0615602dd1@google.com
Fixes: fc71884a5f ("mm: userfaultfd: add new UFFDIO_POISON ioctl")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: syzbot+b07c8ac8eee3d4d8440f@syzkaller.appspotmail.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When seq_* code sees that its buffer overflowed, it re-allocates a bigger
onecand calls seq_operations->start() callback again. stack_start()
naively though that if it got called again, it meant that the old record
got already printed so it returned the next object, but that is not true.
The consequence of that is that every time stack_stop() -> stack_start()
get called because we needed a bigger buffer, stack_start() will skip
entries, and those will not be printed.
Fix it by not advancing to the next object in stack_start().
Link: https://lkml.kernel.org/r/20240404070702.2744-5-osalvador@suse.de
Fixes: 765973a098 ("mm,page_owner: display all stacks and their count")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Upon migration, new allocated pages are being given the handle of the old
pages. This is problematic because it means that for the stack which
allocated the old page, we will be substracting the old page + the new one
when that page is freed, creating an accounting imbalance.
There is an interest in keeping it that way, as otherwise the output will
biased towards migration stacks should those operations occur often, but
that is not really helpful.
The link from the new page to the old stack is being performed by calling
__update_page_owner_handle() in __folio_copy_owner(). The only thing that
is left is to link the migrate stack to the old page, so the old page will
be subtracted from the migrate stack, avoiding by doing so any possible
imbalance.
Link: https://lkml.kernel.org/r/20240404070702.2744-4-osalvador@suse.de
Fixes: 217b2119b9 ("mm,page_owner: implement the tracking of the stacks count")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current code does not contemplate scenarios were an allocation and free
operation on the same pages do not handle it in the same amount at once.
To give an example, page_alloc_exact(), where we will allocate a page of
enough order to stafisfy the size request, but we will free the remainings
right away.
In the above example, we will increment the stack_record refcount only
once, but we will decrease it the same number of times as number of unused
pages we have to free. This will lead to a warning because of refcount
imbalance.
Fix this by recording the number of base pages in the refcount field.
Link: https://lkml.kernel.org/r/20240404070702.2744-3-osalvador@suse.de
Reported-by: syzbot+41bbfdb8d41003d12c0f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000090e8ff0613eda0e5@google.com
Fixes: 217b2119b9 ("mm,page_owner: implement the tracking of the stacks count")
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "page_owner: Fix refcount imbalance and print fixup", v4.
This series consists of a refactoring/correctness of updating the metadata
of tail pages, a couple of fixups for the refcounting part and a fixup for
the stack_start() function.
From this series on, instead of counting the stacks, we count the
outstanding nr_base_pages each stack has, which gives us a much better
memory overview. The other fixup is for the migration part.
A more detailed explanation can be found in the changelog of the
respective patches.
This patch (of 4):
__set_page_owner_handle() and __reset_page_owner() update the metadata of
all pages when the page is of a higher-order, but we miss to do the same
when the pages are migrated. __folio_copy_owner() only updates the
metadata of the head page, meaning that the information stored in the
first page and the tail pages will not match.
Strictly speaking that is not a big problem because 1) we do not print
tail pages and 2) upon splitting all tail pages will inherit the metadata
of the head page, but it is better to have all metadata in check should
there be any problem, so it can ease debugging.
For that purpose, a couple of helpers are created
__update_page_owner_handle() which updates the metadata on allocation, and
__update_page_owner_free_handle() which does the same when the page is
freed.
__folio_copy_owner() will make use of both as it needs to entirely replace
the page_owner metadata for the new page.
Link: https://lkml.kernel.org/r/20240404070702.2744-1-osalvador@suse.de
Link: https://lkml.kernel.org/r/20240404070702.2744-2-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit d7a08838ab ("mm: userfaultfd: fix unexpected change to src_folio
when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to
after clearing the page-table and ensuring that it's not pinned. This
avoids failure of swapout+migration and possibly memory corruption.
However, the commit missed fixing it in the huge-page case.
Link: https://lkml.kernel.org/r/20240404171726.2302435-1-lokeshgidra@google.com
Fixes: adef440691 ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Nicolas Geoffray <ngeoffray@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.
While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.
A reproducer can be found at [1].
The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().
__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.
So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().
But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.
As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.
With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.
[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/
Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes: 4ca9b3859d ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Closes: https://lore.kernel.org/all/20240311223815.GW1927156@frogsfrogsfrogs/
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The DSI device for the panel was registered by the DSI host, so it is an
error to unregister it from the panel driver. Drop the call to
mipi_dsi_device_unregister().
Fixes: ea4f997562 ("drm/panel: Add support for Novatek NT36672E panel driver")
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-2-9f56953c5fb9@linaro.org
The DSI device for the panel was registered by the DSI host, so it is an
error to unregister it from the panel driver. Drop the call to
mipi_dsi_device_unregister().
Fixes: c7f66d32dd ("drm/panel: add support for rm69299 visionox panel")
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-1-9f56953c5fb9@linaro.org
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f5 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
-----BEGIN PGP SIGNATURE-----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=0hRN
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.9-rcN' of https://github.com/kvm-x86/linux into HEAD
- Fix a mostly benign bug in the gfn_to_pfn_cache infrastructure where KVM
would allow userspace to refresh the cache with a bogus GPA. The bug has
existed for quite some time, but was exposed by a new sanity check added in
6.9 (to ensure a cache is either GPA-based or HVA-based).
- Drop an unused param from gfn_to_pfn_cache_invalidate_start() that got left
behind during a 6.9 cleanup.
- Disable support for virtualizing adaptive PEBS, as KVM's implementation is
architecturally broken and can leak host LBRs to the guest.
- Fix a bug where KVM neglects to set the enable bits for general purpose
counters in PERF_GLOBAL_CTRL when initializing the virtual PMU. Both Intel
and AMD architectures require the bits to be set at RESET in order for v2
PMUs to be backwards compatible with software that was written for v1 PMUs,
i.e. for software that will never manually set the global enables.
- Disable LBR virtualization on CPUs that don't support LBR callstacks, as
KVM unconditionally uses PERF_SAMPLE_BRANCH_CALL_STACK when creating the
virtual LBR perf event, i.e. KVM will always fail to create LBR events on
such CPUs.
- Fix a math goof in x86's hugepage logic for KVM_SET_MEMORY_ATTRIBUTES that
results in an array overflow (detected by KASAN).
- Fix a flaw in the max_guest_memory selftest that results in it exhausting
the supply of ucall structures when run with more than 256 vCPUs.
- Mark KVM_MEM_READONLY as supported for RISC-V in set_memory_region_test.
- Fix a bug where KVM incorrectly thinks a TDP MMU root is an indirect shadow
root due KVM unnecessarily clobbering root_role.direct when userspace sets
guest CPUID.
- Fix a dirty logging bug in the where KVM fails to write-protect TDP MMU
SPTEs used for L2 if Page-Modification Logging is enabled for L1 and the L1
hypervisor is NOT using EPT (if nEPT is enabled, KVM doesn't use the TDP MMU
to run L2). For simplicity, KVM always disables PML when running L2, but
the TDP MMU wasn't accounting for root-specific conditions that force write-
protect based dirty logging.
Serge Semin says:
====================
net: stmmac: Fix MAC-capabilities procedure
The series got born as a result of the discussions around the recent
Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000
MACs support:
Link: https://lore.kernel.org/netdev/fu3f6uoakylnb6eijllakeu5i4okcyqq7sfafhp5efaocbsrwe@w74xe7gb6x7p
In particular the Yanteng' patchset needed to implement the Loongson
MAC-specific constraints applied to the link speed and link duplex mode.
As a result of the discussion with Russel the next preliminary patch was
born:
Link: https://lore.kernel.org/netdev/df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn
The patch above was a temporal solution utilized by Yanteng for further
developments and to move on with the on-going review. This patchset is a
refactored version of that single patch with formatting required for the
fixes patches.
In particular the series starts with fixing the half-duplex-less
constraint currently applied for all IP-cores. In fact it's specific for
the DW QoS Eth only (DW GMAC v4.x/v5.x).
The next patch fixes the MAC-capabilities setting up during the active
Tx/Rx queues re-initialization procedure. Particularly the procedure
missed the max-speed limit thus possibly activating speeds prohibited on
the respective platforms.
Third patch fixes the incorrect MAC-capabilities initialization for DW
MAC100, DW XGMAC and DW XLGMAC devices by moving the correct
initialization to the IP-core specific setup() methods.
That's it for now. Thanks for review and testing in advance.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: linux-kernel@vger.kernel.org
====================
Link: https://lore.kernel.org/r/20240412180340.7965-1-fancer.lancer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the list of the MAC capabilities specific to the particular DW MAC
IP-cores currently supported by the driver:
DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100
DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000
DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
if there is more than 1 active Tx/Rx queues:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD
DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD
DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD |
MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da6 ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit
8a880936e9 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da6 ("net: stmmac: Add the missing speeds that XGMAC supports")
Fixes: df7699c70c ("net: stmmac: Do not cut down 1G modes")
Fixes: 8a880936e9 ("net: stmmac: Add XLGMII support")
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.
Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.
Fixes: 95201f36f3 ("net: stmmac: update MAC capabilities when tx queues are updated")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No new changes will be added for minor version 2. Change the minor
version number to 2 and stop displaying log message for unsupported
minor version 2.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415220625.2828339-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Granite Rapids-D to hpm_cpu_ids, so that MSR 0x54 can be used.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20240415212853.2820470-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
